Apprentice electrician jobs in Arlington Heights, IL

Charter Manufacturing is a fourth-generation family-owned business where our will to grow drives us to do it better. Join the team and become part of our family! ***$5000 Hiring Bonus*** At Charter Dura-Bar, our Maintenance team is the backbone of our operations, keeping everything running smoothly. They tackle a variety of challenges, from installing and maintaining equipment to troubleshooting complex problems and executing preventive maintenance plans. Join our Skilled Trades Team and elevate your talents. POSITION PURPOSE/MISSION: In the electrical maintenance role you will Install, maintain, troubleshoot, and repair all electrical systems of the plant in accordance with codes, regulations, and specifications, ensuring minimum down time of the plant operations, in accordance with company policies and procedures. Support maximizing facility uptime through execution of rolling equipment setups. PHYSICAL REQUIREMENTS: Constant standing. Frequent lifting up to 10 lbs. Occasional carrying, lifting to 60 lbs, hand use, pushing/pulling, reaching, sitting, below waist level work, complex neck/spinal motion, and walking. Minimal climbing, foot use, and lifting up to 120 lbs. Ability to meet the physical requirements, with or without reasonable accommodation, as provided in detail in the Job Analysis Database MINIMUM QUALIFICATIONS: High School Diploma or GED. Accredited maintenance apprenticeship or two years technical training with two plus years' industrial electrician experience. Five plus years' industrial electrician experience or equivalent combination of education and experience Demonstrated ability to read and interpret documents such as wiring diagrams, schematic drawings, instructions, safety rules, code books, and specifications. Demonstrated ability to inspect electrical systems, equipment, and machines for possible problems. Knowledge of medium voltage power distribution systems. Knowledge of drives, controls, motion controllers, PLCs, and/or motors. Understanding of national electric code (NEC) and NFPA-70E. Ability to operate mobile equipment such as forklifts, overhead traveling cranes, and aerial lift platforms in a safe and professional manner. Ability to use math skills including fractions, percentages, geometry, and probability. Ability to read and understand technical procedures Good verbal and written communication skills. Ability to follow and give instructions. Ability to work well with other employees. Proficient in basic computer skills. Knowledge of lockout/tagout procedures. PREFERRED QUALIFICATIONS: Knowledge of silicon-controlled rectifiers (SCR), rectifiers, capacitors, and resistors. Advanced knowledge of PLC programming (Allen Bradley, Siemen, GE, etc.) Advanced knowledge of operation of SCRs, rectifiers, capacitors, and resistors. Advanced knowledge of Proportional Integral Derivative (PID) troubleshooting experience. Machine tool, forklift truck, and crane experience. Advanced knowledge and aptitude on hydraulic, pneumatic, combustion, machining, and mechanical systems. Troubleshooting experience with automated systems (material handling, machine tools, and metal casting equipment) Work experience in a foundry environment. MAJOR ACCOUNTABILITIES: Perform advanced problem solving by identifying, troubleshooting, and correcting electrical issues. Perform a wide variety of installation, maintenance, and troubleshooting work to keep production and support equipment in operating condition. Act as subject matter expert for electrical systems. Analyze test results, machine error messages, and information obtained from operators to diagnose and repair. May perform ARC flash program. Layout control panels using schematics and I/O mapping. Perform a wide variety of electrical installation, maintenance, and troubleshooting work to keep production and support equipment in operating conditions. Plan, layout, and install complex wiring circuits and distribution centers in conformance with established electrical codes; plan, measure, bend, and fir conduit. Install and troubleshoot motor control centers, power distribution panels, lighting panels, and controls on plant equipment such as bar pulling machines, cut off equipment, centerless grinders, trepanning lathes, dust collectors, melting and holding furnaces, and other similar types of equipment. Repair, replace, and connect single or three-phase motors AC or DC, on all types of production and support equipment. Maintain and replace starter, contactors, relays, timers, limit switches, and counters. Use material handling equipment when performing certain electrical maintenance work; operate a forklift truck for transporting equipment and lifting employees; use specialized power equipment for pulling cable and wire. Use multimeters and other test instruments when troubleshooting electrical circuits; interpret resistance, voltage and amperage readings to arrive at the solution to electrical problems; use instrumentation built into equipment to diagnose certain malfunctions. Proceed independently when installing or troubleshooting electrical equipment; obtain needed information form wiring diagrams, schematic drawings, and code books. Follow all plant safety rules; including lock out of all plant equipment so that it is safe to work on; use safety equipment appropriate for the job; be aware of the safety of others. Follow Environmental, Quality and Safety Management System procedures and requirements. Ability to meet the essential job requirements, with or without reasonable accommodation, as outlined in the job description. #LI-Onsite #LI-ME1 The entry hourly rate for this position is $35.25 per hour. The actual base pay offered to the successful candidate will depend on various factors, including but not limited to job-related skills, experience, and qualifications. Compensation decisions are tailored to the unique circumstances of each position and candidate.We offer comprehensive health, dental, and vision benefits, along with a 401(k) plan that includes employer matching and profit sharing. Additionally, we offer company-paid life insurance, disability coverage, and paid time off (PTO).

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Butler, WI Job Type: Full Time Shift(s) Available: 2nd Compensation: $36.15/hr Benefits Information Competitive Pay Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Production: health benefits commence on the 1st of the month after 90 days of employment Salary: health benefits commence on the 1st of the month following the date of hire Principal Accountabilities Performs work assigned by supervisor Identify follow-up work and parts required Assist in development and implementation of new systems Complete, Sign and return Work Order to Maintenance Supervisor complete with; Work Description, Symptoms, As Found, As Left, Start / Finish time, and Labor Hours and Note Deficiencies, Delays, any Job Plan Feedback Help promote and communicate Maintenance and Reliability to the Organization Other duties include housekeeping, safety training, and meetings Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older 2 years industrial maintenance experience Excellent communication skills (English written, verbal, listening) Ensure compliance with all local codes, regulations Preferred Qualifications Associate degree in Electronic Engineering or significant experience in PLC and control system troubleshooting High School Diploma or equivalent Troubleshoot limit switches, photo eye and proximity switches Proficient in reading ladder diagrams and be able to troubleshoot PLC machines without the aid of a computer Trouble shoot, repair and replace faulty electrical components through the use of hand tools and electrical test equipment Measure, cut and bend conduit such as rigid EMT, PVC, and IMC utilizing hand tools and benders Be able to Set up and troubleshoot drives, showing understanding and ability to change settings Troubleshoot PLC on line Understand the Hydraulic, pneumatic and vacuum system concepts Experience with Microsoft Office Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Six Flags Great America is seeking qualified applicants for the position of Electrician. The ideal candidate will have the knowledge and capability to repair and maintain existing electrical equipment, lighting fixtures, wiring and controls as well as the ability to install or modify electrical systems, controls and components. Responsibilities: Job Duties include, but are not limited to, the following: Repair, install and troubleshoot electrical wiring systems, controls, lighting fixtures, kitchen equipment, heating systems, power stations, vehicles and ride equipment. Perform preventative maintenance on all electrical apparatus. Install or modify electrical systems and components. Update drawings and schematic diagrams and assist in the selection of electrical components and material. Assist with Park Operation responsibilities as needed. Qualifications: The ideal candidate will possess the following: High School Diploma or GED with a Trade School certification or currently in a trade program. Must be able to perform, or be willing to learn, the following: Troubleshoot various electrical problems on rides, controls, and electrical equipment. Install and bend all types of piping systems. Work from schematic wiring diagrams. Use testing instruments related to electrical work. Must be familiar with current electrical codes. Must provide hand tools for daily use. Must be able to climb and work at various heights and some heavy lifting may be required. Must possess a valid driver's license. This is a full-time position and the candidate must be willing to work varied shifts and flexible schedules, including nights, weekends, and holidays.

The electrician technician will handle troubleshooting and repairs to keep equipment running and minimize downtime while supporting all other members of the maintenance group with any other repairs, projects, etc. deemed necessary by the department manager. Proficient with electrical troubleshooting and repairs. Test and replace fuses. Test and replace solenoids. Test and replace contactors / relays. Test and replace proximity / limit switches. Reset and replace breakers / motor starters. Adjust and replace photo eyes. Able to make conduit runs, wire pulls, and wire terminations. Proficient in performing pneumatic and hydraulic system repairs. Proficient working with single phase / 3 phase / 110V, 240V, 277V, 480V, and 24V control systems. Able to work with Voltmeter/Amp Meter to troubleshoot electrical systems. Proficient reading schematics/blueprints to troubleshoot electrical systems. Able to troubleshoot AC / DC control circuits. Able to troubleshoot motors and drives, then replace if needed. Proficient at troubleshooting PLC's and ladder logic. Able to cross reference and change out electrical devices with other brands. Able to troubleshoot by phone while communicating with other maintenance personnel or machine techs. Able to circumvent problems and find ways to keep machines running. Able to perform project work with little supervision. Able to communicate and problem solve with foreign and domestic techs by phone and online support. Perform electrical building maintenance. Assist with electrical PM as needed. Proficient with mechanical troubleshooting and repairs. Fluent with schematics and blueprints. 480V 3 phase wiring expertise. Comfortable working independently. In addition to the functions listed above, the employee is expected to: exercise honesty, integrity and respect with all clients and co-workers, maintain a professional appearance and demeanor, demonstrate a positive attitude, communicate effectively with co-workers and clients, work with accuracy, efficiency, and attention to detail, maintain good attendance by working when and where directed, work safely in compliance with all safety policies, respect the work environment and keep it as neat and clean as possible, and exercise initiative to learn new skills and tasks and to help co-workers when possible. The employee is also expected to perform such other duties and functions as required and assigned from time to time. Qualifications: High School Diploma/GED preferred. Good verbal and written communication skills with ability to communicate effectively with contractors, service techs (onsite/phone support), and fellow employees. Understands various aspects of an industrial facility including structural, electrical, plumbing systems, etc. Ability to work additional hours and weekends as necessary to meet business plan objectives. Proficiency in MS Excel & Word is a plus. Proficient with industrial trouble shooting skills. Proficient with various software and drives. Fluent with schematics and blueprints. 480V 3 phase wiring experience. Proficiency in MS Excel & Word is a plus Strong industrial trouble shooting skills. CNC background a plus. 4 years manufacturing experience preferred. Demonstration of minimum proficiency with the English language in order to ensure effective new hire training and on-going communications about safety and quality issues. Machines/Tools/Equipment: Voltmeter, conduit benders, assortment of hand and small power tools, computer, basic office equipment, tow motor, etc. Salary-$35-$45 depending on experience. Safety: Employees are expected to follow all facility safety guidelines that include adhering to GMP (Good Manufacturing Practices) and Food Safety as outlined during their training. Working Conditions: Manufacturing environment working around machinery, moving equipment, and loud noise (hearing protection required) Environment is not climate-controlled and there is exposure to a wide range of temperatures (temperature varies depending on work/machine location and ranges from 50 degree F to 100 degree F). Possibility of outside work in all types of weather conditions (including heat, cold, rain, and snow). The proposed salary range for this position is $35-$45 per hour depending on experience. WE ARE AN EQUAL OPPORTUNITY EMPLOYER. We strive to create and maintain an inclusive and diverse workforce where everyone feels valued, respected, and included. We consider applicants for all positions without regard to age, race, color, religion, creed, sex, national origin, disability, sexual orientation, citizenship, veteran status, gender identity or any other legally protected status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of a job.

Responsibilities: Install, repair, calibrate, and inspect electrical devices, equipment, and circuits in the plant Receive and inspect wiring diagrams, drawings, and specifications to resolve electrical needs Repair or replace faulty motors, switches, control panels circuit breakers, control devices, batching systems, control instrumentation, and other plant electrical and electronic equipment Plan and perform work on energized circuits Measure, cut, bend, and install fittings, switches, controls fixtures, and wires Connect all types of electrical equipment for new installations Plan and perform skilled soldering repairs, installation, and calibration of thermocouple and pyrometer-controlled systems Minimum skills / qualifications: High School Diploma or equivalent Journeyman level Electrician experience Experience in industrial control, lighting, and wiring Must be able to stand for 8 hours Must be able to lift twenty (20) pounds Preferred skills / qualifications: PLC knowledge

LHH Recruitment Solutions has partnered with a growing organization, and they are seeking a motivated Maintenance Electrician to join their team. You will play a critical role in maintaining and troubleshooting complex electrical systems across a high-volume production facility. You will work with a team of professionals committed to safety, precision, and operational excellence. Key Responsibilities: Diagnose and repair electrical systems including motors, controls, and instrumentation. Perform preventive and predictive maintenance using computerized systems. Read and interpret schematics, blueprints, and control circuits. Ensure compliance with NEC standards and internal safety protocols. Maintain accurate service records in alignment with regulatory requirements. Respond to routine and emergency maintenance calls with professionalism and urgency. Technical Competencies: Must have proficiency in: AC/DC theory and electrical maintenance. Digital and analog electronics. PLC systems and test instruments. Power distribution and installation. Mechanical systems and hand/power tools. Electrical schematics and print reading. Qualifications and Skills: 2+ years of hands-on electrical maintenance experience (4,000+ hours preferred). Demonstrated competency in preventative, predictive and computerized electrical maintenance management systems. Inspection and identification and knowledge of all electrical distribution systems (12 to 5K volts). Compensation Range: $35.00hr-$41.50/hr + Overtime Work Schedule: Overtime Expected: 5-10 hours a week Position is primarily on 1st shift, but must be flexible to work on a team that takes turns working an alternate shift as needed to support the business needs Benefits Offered: 2 weeks of vacation, paid sick leave where applicable by state law, Medical Insurance, Dental Insurance Vision Insurance, 401K, and Life Insurance. If you are a passionate Maintenance Electrician looking for a new and rewarding career, please apply today! You don't want to miss out on this opportunity! LHH is a leader in permanent recruitment-and in the placement of top talent. Our areas of specialty include office administration, customer service, human resources, engineering, and supply chain and logistics. Please feel to check us out and apply for other opportunities if this role isn't a perfect match. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit **************************************

Responsive recruiter Benefits: 401(k) matching Free uniforms Health insurance Join Our Team of Professional ElectriciansDo you value professionalism and punctuality? Do you want to work with the best pros in the electrical industry? Then you could be a candidate for Mister Sparky. If you value a rewarding career and would like your customers to be genuinely satisfied, you'll be fit for our team! Opportunities for professional electricians and customer service professionals are now available across the country. JOB SUMMARYAn apprentice will assist lead electricians in the completion of all jobs while gathering crucial experience for their career. Apprentice electricians obtain knowledge from our experienced team, learn new problem-solving skills, and gain the hands-on experience needed.JOB DUTIES Install, repair, and maintain residential and commercial electrical equipment. Determine the general condition of all electrical equipment, troubleshoot electrical mysteries, and decipher the extent of necessary repairs. Identify the proper materials and material quantities for new and existing repair projects. Use the Straight Forward Pricing Guide to accurately present repair or installation options. Complete safety inspections. Your mission: to ensure everyone is safe from electrical issues. GREAT BENEFITS Great family run business with great culture and environment Advancement opportunities Company paid training Medical insurance Paid time off including holidays and vacation 401 (k) + match MINIMUM REQUIRESMENTS Minimum 2 years field experience or equivalent technical training 2+ years field experience highly preferred Clean driving record Ability to communicate effectively to clients about issues and provide accurate solutions Compensation: $20.00 - $30.00 per hour Join the Mister Sparky Team! We want to make joining our team as easy as possible. Our team members are the most valuable assets in our organization. It's true, our employees come first! How do we prove it? First things first. Pay- We believe the best performers deserve the best pay. That's why we want to pay YOU the best competitive rate. Flexibility- We want YOU to have time for the most important things in your life. Our scheduling is flexible. Find out how we do it. Career Path- We offer you an unlimited future with our world class training programs. Our training programs include Technical Training, Virtual technical training, communications, sales, and more! If you are serious about your career and want to learn from the best in the industry apply today! So, if you have a great attitude and a strong work ethic, and are someone who takes pride in the work you do, then we want to hear from you! Each franchise location is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. The franchisee sets their own compensation and benefits. All inquiries about employment, benefits, scheduling and compensation at this franchise should be made directly to the franchise location, and not to Mister Sparky Corporate.

Metra is the rail system serving the six-county Chicago area. Metra provides service to and from downtown Chicago with 243 stations across 11 routes, totaling nearly 500 route miles. We remain one of the largest and most complex rail systems in North America, with a service area encompassing more than 3,700 square miles. Please Note: This posting is intended to proactively build a pipeline of qualified candidates for future Electrician Apprentice opportunities. This specific position is not currently open and will not be filled at this time. Electrician Apprentices receive comprehensive training to develop the skills necessary for inspecting, repairing, and maintaining electrical systems and components on passenger railcars and locomotives. Training includes both formal classroom instruction and hands-on experience under the guidance of a certified Journeyman Electrician. This is a union-represented position. Starting pay rates are determined by the entry-level provisions outlined in the applicable Collective Bargaining Agreement (CBA). Metra is a railroad employer governed by the Railroad Retirement Tax Act (RRTA), and not the Social Security Administration. Qualified veterans who meet the minimum requirements will receive outreach during the recruitment process in accordance with Federal and State laws, including the Illinois Veterans Preference Act. Please note that meeting the minimum qualifications does not guarantee an interview or job offer. The most qualified candidate will be selected. Metra is one of the largest and most complex commuter rail systems in North America, serving Cook, DuPage, Will, Lake, Kane, and McHenry Counties. The agency is committed to linking communities in Northeastern Illinois by providing safe, reliable, and efficient commuter service. Click here to learn more about our benefits! Requirements Minimum Requirements Candidates must be at least 18 years of age. Must have a high school diploma or GED. Must complete the minimum qualifications online questionnaire within the application posting period. Must be able to bend, stoop, and lift up to 50 lbs. Must be able to work different shifts. Preferred Qualifications Military experience, trade school, or college coursework. Additional Considerations Metra employees currently under active review per the discipline policy, or with documented attendance or performance issues, will not be considered or selected for this position. Drug & Alcohol Policy Please note: Regardless of any state laws that legalize marijuana, Metra prohibits applicants and employees from using or possessing marijuana (including marijuana paraphernalia), or having detectable amounts of marijuana in their bodies-including synthetic and/or non-synthetic substances such as THC-for any reason during pre-employment screening, while on duty, subject to duty, on Metra property, or in Metra vehicles and equipment. Accessibility & Accommodations Metra is committed to ensuring that our career website and recruiting process are accessible to all individuals. If you require reasonable accommodations to complete this application, participate in interviews, complete any pre-employment testing, or engage in any other aspect of the employee selection process, please contact ***************. Equal Opportunity Employer Metra is an Equal Opportunity/Affirmative Action Employer. It is our policy to fill vacant positions with qualified candidates without regard to race, color, sex, religion, national origin, age, gender identity, disability, or any protected category, provided the individual can perform the essential functions of the job with or without accommodation.

Metra is the rail system serving the six-county Chicago area. Metra provides service to and from downtown Chicago with 243 stations across 11 routes, totaling nearly 500 route miles. We remain one of the largest and most complex rail systems in North America, with a service area encompassing more than 3,700 square miles. Please Note: This posting is intended to proactively build a pipeline of qualified candidates for future Electrician Apprentice opportunities. This specific position is not currently open and will not be filled at this time. Electrician Apprentices receive comprehensive training to develop the skills necessary for inspecting, repairing, and maintaining electrical systems and components on passenger railcars and locomotives. Training includes both formal classroom instruction and hands-on experience under the guidance of a certified Journeyman Electrician. This is a union-represented position. Starting pay rates are determined by the entry-level provisions outlined in the applicable Collective Bargaining Agreement (CBA). Metra is a railroad employer governed by the Railroad Retirement Tax Act (RRTA), and not the Social Security Administration. Qualified veterans who meet the minimum requirements will receive outreach during the recruitment process in accordance with Federal and State laws, including the Illinois Veterans Preference Act. Please note that meeting the minimum qualifications does not guarantee an interview or job offer. The most qualified candidate will be selected. Metra is one of the largest and most complex commuter rail systems in North America, serving Cook, DuPage, Will, Lake, Kane, and McHenry Counties. The agency is committed to linking communities in Northeastern Illinois by providing safe, reliable, and efficient commuter service. Click here to learn more about our benefits! Requirements Minimum Requirements * Candidates must be at least 18 years of age. * Must have a high school diploma or GED. * Must complete the minimum qualifications online questionnaire within the application posting period. * Must be able to bend, stoop, and lift up to 50 lbs. * Must be able to work different shifts. Preferred Qualifications * Military experience, trade school, or college coursework. Additional Considerations * Metra employees currently under active review per the discipline policy, or with documented attendance or performance issues, will not be considered or selected for this position. Drug & Alcohol Policy Please note: Regardless of any state laws that legalize marijuana, Metra prohibits applicants and employees from using or possessing marijuana (including marijuana paraphernalia), or having detectable amounts of marijuana in their bodies-including synthetic and/or non-synthetic substances such as THC-for any reason during pre-employment screening, while on duty, subject to duty, on Metra property, or in Metra vehicles and equipment. Accessibility & Accommodations Metra is committed to ensuring that our career website and recruiting process are accessible to all individuals. If you require reasonable accommodations to complete this application, participate in interviews, complete any pre-employment testing, or engage in any other aspect of the employee selection process, please contact ***************. Equal Opportunity Employer Metra is an Equal Opportunity/Affirmative Action Employer. It is our policy to fill vacant positions with qualified candidates without regard to race, color, sex, religion, national origin, age, gender identity, disability, or any protected category, provided the individual can perform the essential functions of the job with or without accommodation.

Department: Facilities Mgmt EV Salary/Grade: 399/S3 Under direction, performs journeyman level work and is proficient in the trade. Maintains repairs, installs and alters electrical systems, equipment and fixtures. Works from sketches, layouts or prints with latitude to determine materials and layout. All work is subject to inspection and review. The role will support the department's mission and values by exhibiting the following: inclusiveness, respect, initiative, collaboration, innovation, and accountability. The incumbent will strive to provide excellent service when performing job responsibilities and will practice safe work procedures, and follow safety rules at all times. Please note: Operating Engineers Local 399, or join after a 90-day probationary period. Physical ability to lift and maneuver heavy weights, climb and descend ladders, and work in hot, cold, cramped and confined quarters. Ability to work safely and at heights on ladders, lifts and scaffolding. Dexterity necessary for the use of tools and manipulation of materials. Must be available and capable of responding to irregularities during evenings and weekends ensuring 24 hour, 7 day per week coverage. Specific Responsibilities: * Installs, repairs, and maintains electrical/power systems which operate on alternating or direct current circuits. Systems may include medium and high voltage lines, switchboards, panels and gear, generator and motor controls, switches, meters and circuit breakers; * Repairs and maintains lighting control systems, alarm systems, motors, heaters and other apparatus utilizing electricity or its effects; * Performs preventative maintenance on transformer vaults and switchgear for safety and power conditions; * Repairs, installs and maintains fire alarm systems and devices; * Tests and maintains operation of emergency generators and transfer switches; * May instruct and oversee semiskilled or unskilled workers; Miscellaneous Performs other duties as assigned. Minimum Qualifications: * High School diploma, GED or equivalent combination of educational training and experience from which comparable skills can be acquired; * Completion of an accredited electrical apprenticeship program; * Five years field experience at journeyman level; * Must be a member of Operating Engineers Local 399 or join after satisfactory completion of a 90-day probationary period; * Possess and maintain a valid driver's license recognized by the State of Illinois, provide own reliable transportation and purchase a University parking permit (as required). Minimum Competencies: (Skills, knowledge, and abilities.) * Thorough knowledge of the tools, instruments, methods and standard trade/safety practices; * Working knowledge of fire alarm systems and related equipment; * Working knowledge of the National and/or Chicago Electrical codes, BOCA and NFPA; * Must be able to work independently, problem-solve and utilize skills to complete multi-component electrical projects in a safe, quality and timely fashion under minimal supervision; * Solid working knowledge of repair and maintenance of variable frequency drives; * Ability to perform calculations applicable to field of experience; * Receptive to feedback, willing to learn, embracing continuous improvement; * Helpful, respectful, approachable and team oriented; * Ability to build strong working relationships and a positive work environment; * Seeks to build collaboration by encouraging trust, mutual respect and shared purpose; * Balances listening and talking, speaks and writes clearly and accurately, keeps others informed; * Integrates health and safety precautions into daily activities; * Works effectively in an environment in which the parameters may change daily; adjusts behavior to meet the needs of different people and situations; * Successfully uses multiple software program independently. Software may include Microsoft Office applications such as Word, Excel, and Outlook, CMMS Systems and Peoplesoft; * Proficiency with mobile devices including iOS. Preferred Qualifications: * 10 years field experience; * A.S.E. Certified Master Technician; * College level training and related work experience in an institutional setting; * Knowledge of state of the art electrical technologies (e.g. lighting control systems); * Three years' experience VFD installation and programming. Preferred Competencies: (Skills, knowledge, and abilities) * Facilitates open and effective communication, cooperation and teamwork within and outside of one's own team; * Plans ahead, manages time well and arrives on time; * Recommends improvements and opportunities to increase efficiency and reduce costs; * Exceptional customer relationship skills and the ability to establish effective working relationships in a diverse environment; * Analytical skills including critical thinking, decision making, trouble shooting and problem solving, reading and interpreting technical drawings; * Achieves a standard of excellence with work processes and outcomes, honoring University and Department policies and all regulatory requirements. Pay for this role is $54.14/hr. per the Local 399 CBA Benefits: At Northwestern, we are proud to provide meaningful, competitive, high-quality health care plans, retirement benefits, tuition discounts and more! Visit us at *************************************************** to learn more. Work-Life and Wellness: Northwestern offers comprehensive programs and services to help you and your family navigate life's challenges and opportunities, and adopt and maintain healthy lifestyles. We support flexible work arrangements where possible and programs to help you locate and pay for quality, affordable childcare and senior/adult care. Visit us at ************************************************************* to learn more. Professional Growth & Development: Northwestern supports employee career development in all circumstances whether your workspace is on campus or at home. If you're interested in developing your professional potential or continuing your formal education, we offer a variety of tools and resources. Visit us at *************************************************** to learn more. Northwestern University is an Equal Opportunity Employer and does not discriminate on the basis of protected characteristics, including disability and veteran status. View Northwestern's non-discrimination statement. Job applicants who wish to request an accommodation in the application or hiring process should contact the Office of Civil Rights and Title IX Compliance. View additional information on the accommodations process. #LI-EN1

Corporation Whirlpool Corporation (NYSE: WHR) is a leading home appliance company, in constant pursuit of improving life at home. As the only major U.S.-based manufacturer of kitchen and laundry appliances, the company is driving meaningful innovation to meet the evolving needs of consumers through its iconic brand portfolio, including Whirlpool, KitchenAid, JennAir, Maytag, Amana, Brastemp, Consul, and InSinkErator. In 2024, the company reported approximately $17 billion in annual sales - close to 90% of which were in the Americas - 44,000 employees, and 40 manufacturing and technology research centers. Additional information about the company can be found at WhirlpoolCorp.com. This role in summary Position provides functional support to install and maintain electrical work on plant electrical systems and equipment. Responsible for work on substation, wiring circuits, distribution centers, control panels, electronic devices, etc. Work hours consist of a rotating 10-hr shift with 8 days on, 6 days off. This may require presence at facility during night shifts, weekends and holidays. This is a Safety Sensitive position. Employees in this classification will be included on the list of employees who may be randomly screened under our Substance Abuse policy. This is a 2nd or 3rd shift position A resume must be submitted to be considered for the position Your responsibilities will include Install and maintain electrical work on plant electrical systems and equipment with minimum supervision, using a broad knowledge of applied trade practices and technique. The use of ladders, raised platforms, caged lifts, and manual climbing on equipment at various heights up to and including 25 feet is required. Plan, layout and install complex wiring circuits and distribution centers in conformance with established codes, install switches and controls, central subsidiary control panels, electronic devices and all other duties incidental to installation. Maintain substation; diagnose and remedy all electrical, electronic and mechanical troubles. Work from wiring, hydraulic, pneumatic schematic drawings and code book. Use all electrical measuring and testing devices. May direct and layout work for electricians of lower classification. Minimum requirements * State of WIsconsin license is required * All license electricians from another state without a WI license must show proof of reciprocity between the state they are license in and WI * Candidates with electrical experience without a WI license must acquire a license within six months of the first date of employment. Preferred skills and experiences An additional two (2) years of electrical journeyman experience Why should you apply? * Up to 80+ hours of paid training * Up to 120 hours of paid time off (prorated based on start date) * Medical, dental, vision, 401k and other benefits available immediately * We offer manufacturing careers * Tuition reimbursement * Growth opportunities * Perfect Attendance Bonus * Appliance Discounts 2nd shift Electricians enjoy a 10 hour schedule - 8 days on; 6 days off with a 12.5% shift differential Connect with us and learn more about Whirlpool Corporation See what it's like to work at Whirlpool by visiting Whirlpool Careers. Additional information about the company can be found on Facebook, Twitter, LinkedIn, Instagram and YouTube. Whirlpool Corporation is committed to equal employment opportunity and prohibits any discrimination on the basis of race or ethnicity, religion, sex, pregnancy, gender expression or identity, sexual orientation, age, physical or mental disability, veteran status, or any other category protected by applicable law.

Crown CAPP is seeking an experienced Industrial Electrician. This position will troubleshoot, repair, replace, maintain electrical/ systems for production related equipment and building utilities within a high-speed metal packaging manufacturing facility. This is an hourly position in high-speed, high-volume manufacturing environment where compliance to all safety policies, procedures and regulations is our way of doing business. We are looking for team-oriented individuals who are committed to customer quality, continuous improvement and achieving World Class Performance. Hourly Rate: $40.00/hr Primary Hours/Shift: 3rd Shift (10:00pm - 6:30am) Day to day responsibilities will include the following: Perform preventive maintenance inspections on production equipment as needed and assigned Assist in developing related preventive maintenance that do not currently exist. Troubleshoot of circuits as required to repair, adjust, calibrate, replace, modify electrical components and devices of production equipment. Knowledge of the requirements and use of Lockout Tagout. Knowledgeable of and conform to the requirements of NFPA70E, Arc Flash. Other duties as assigned. Job requirements: The successful candidate will possess the following skills and knowledge: High School Diploma or GED required. 5+ years of experience as a Maintenance/Industrial electrician in a manufacturing environment highly preferred. Experience troubleshooting and repairing of high-speed manufacturing equipment. Electrical, electronic, pneumatic & mechanical knowledge, comprehension, and skills Troubleshooting ability of AC/DC control circuits 120/240 VAC and 440 VAC single and three phase power circuits Knowledge of and ability to troubleshoot variable frequency drives, AB Power Flex 40, 525 & Control Techniques An understanding of ladder logic AB RS Logics 5, 500, & 5000 Knowledge of and ability to troubleshoot Programmable Logic Controllers (PLCs) - Allen Bradley PLC 5, SLC 500, Compact Logics Must be able to comprehend and comply with all OSHA and company safety and electrical regulations including Lock Out / Tag Out, and Arc Flash protection Use of hand tools, Multi-meters Analog & Digital, ammeters, amp probes Ability to read and understand manuals, prints and electrical schematics Good communication and basic computer skills Planning and organizing skills Physical requirements: Work from ladders, lifts, catwalks above floor level (4-10 feet); occasionally at ceiling height (20+ feet) Frequent standing, walking, climbing, reaching, bending, squatting, & reaching above shoulder level Pushing, pulling, and lifting requirements: 25+ pounds. Good Color vision Exposure to high levels of noise (hearing protection required in plant area)

Description Triad Associates (part of the Concordia Wireless family) is a nationwide construction services firm specializing in the development of wireless communication sites, with a focus on supporting telecom networks. We are contracted by major carries to facilitate network upgrades including conversions from 4G to 5G. Our services include construction management, electrical and civil modernization, antenna and line (A&L) tower work, tower maintenance, fiber optic network deployment, commissioning and integration, directional boring, trenching, and excavating. Our expertise spans a wide range of projects. To support our growing client base, we are seeking candidates interested in Field Electrical Apprentice positions. The Field Electrical Apprentice is responsible for performing a variety of tasks associated with civil construction projects including site preparation, excavation, pouring concrete, pipe laying, basic electrical tasks, and general labor duties. The role requires working under the direction of a Foreman or Supervisor to ensure the successful completion of daily tasks in compliance with safety and quality standards. Career path to Journeyman level is available. Please note: hours for this job will require you to work evenings at client locations. Working hours are approximately 5 pm CST - 5 am, Monday - Thursday. Transportation from our facility in Carol Stream will be available to/from client site. Benefits: 401K - with company match up to 6% Healthcare: Medical, Dental, Vision Company paid life insurance Short- and long-term disability benefits Vacation pay and sick pay Minimum of 10 paid holidays 1 floating holiday per year Endless opportunities for growth! Responsibilities: Assist in site preparation, excavation, grading, and backfilling operations. Install civil infrastructure such as drainage systems, conduit, fiber, cement platforms, and more. Assist in concrete work including formwork, pouring, and finishing. Route electrical conduits and raceways Operate or support operators of machinery and equipment such as compactors, rollers, or excavators. Follow construction drawings, plans, and instructions from supervisors. Load and unload construction materials and move them to work areas. Maintain tools and equipment in good working condition. Clean and maintain the worksite to ensure a safe and orderly environment. Qualifications and Skills: High school diploma or equivalent (preferred). Previous experience in civil or construction labor (1+ year preferred). Good physical condition and ability to perform manual labor. Strong work ethic and willingness to learn. Safety-conscious attitude and knowledge of site safety practices. Ability to work as part of a team and follow instructions. Work Conditions: Work is primarily outdoors in various weather conditions. May involve long hours, weekend, or night shifts depending on project timelines. Physically demanding role, requiring lifting, bending, and standing for long periods. Triad Associates Inc. is a division of Concordia Group. Triad Associates Inc. is a drug and alcohol free workplace including marijuana. Triad Associates Inc is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. #INDMP

Established in 1991, Collabera has been a leader in IT staffing for over 22 years and is one of the largest diversity IT staffing firms in the industry. As a half a billion dollar IT company, with more than 9,000 professionals across 30+ offices, Collabera offers comprehensive, cost-effective IT staffing & IT Services. We provide services to Fortune 500 and mid-size companies to meet their talent needs with high quality IT resources through Staff Augmentation, Global Talent Management, Value Added Services through CLASS (Competency Leveraged Advanced Staffing & Solutions) Permanent Placement Services and Vendor Management Programs. Collabera recognizes true potential of human capital and provides people the right opportunities for growth and professional excellence. Collabera offers a full range of benefits to its employees including paid vacations, holidays, personal days, Medical, Dental and Vision insurance, 401K retirement savings plan, Life Insurance, Disability Insurance. Job Description Job Title: Electrician - 14 Location: Aurora, IL 60507 Duration: 1 year Candidate Responsibilities · As an Electrician, you will be responsible building, installing and repairing electrical and electronic circuits used on machine tools and plant equipment. · While applying your knowledge the operations of electrical units and systems, you will test and diagnose malfunctions. · Job Duties/Responsibilities may include, but are not limited to: o Build, install, repair electrical and electronic circuits used on machine tools and plant equipment. o Applies knowledge of operation of electronic circuits to locate defects using instruments. o Tests faulty equipment o Apply knowledge of operation of electronic units and systems to diagnose malfunctions o Utilize oscilloscopes, signal generators, electronic counter, recorders, etc. o Calibrate and service electronic testing instruments. Qualifications Required Qualifications: · PLC knowledge and experience. · Must have completed field related college degree, electrical apprenticeships, technical school, previous experience, military training or equivalent. · Knowledge of electronics, electronic controls, and PLC logic. · Strong problem solving and troubleshooting abilities on complex electrical / electronic manufacturing systems. · Blueprints and schematics to troubleshoot motors, transformers, communication devices, and electronic controllers on machine tools, industrial robots, welders, and overhead lifting equipment. · Preventive maintenance · Excellent communication skills Desired Qualifications: · Previous job related experience in a warehouse/factory environment Additional Information To learn more about this position, please contact: Cris Cesar ************ ***************************

Job DescriptionElectrician We are seeking an experienced Electrician for an overnight shift to perform mid-level work in the repair and maintenance of facilities. This role may also lead others in related tasks as needed. The ideal candidate will confidently provide electrical services, including identifying repair and replacement needs; installing, repairing, maintaining, and upgrading electrical equipment; and supporting other skilled trades. Responsibilities include: Independently perform a wide range of facilities and systems maintenance tasks and serve as a back-up to other craft workers on complex assignments. Analyze system operations, troubleshoot malfunctions, and take corrective actions. Assist with installation and repair of piping/tubing; wire single and three-phase motors (single & two-speed); run conduit; and pull wiring to machinery, motors, and equipment. Install and rebuild pumps, motors, air compressors, heat exchangers; replace bearings and seals; repair piping, valves, filters, hot water systems, and associated controls. Inspect, repair, or replace valves, motors, controls, switches, gauges, wiring, fans, pumps, compressors, condensers, and other system components. Low-voltage experience is a plus. Document all work in the CMMS system and comply with company safety and risk-management policies. Report all accidents/injuries promptly and participate in safety meetings, training, and hazard assessments. Apply OSHA and local safety requirements to all assigned work. Attend designated training programs (classroom or virtual). Perform additional duties and responsibilities as assigned. Shared Responsibilities: Maintain accurate electronic work order records. Research, track, and inventory equipment parts and supplies. Respond to routine and emergency repair/service calls. Assist in training other team members in facilities maintenance. Serve as back-up to other facilities employees as needed. Qualifications: High school diploma or GED. Journeyman Electrical License. Valid state drivers license in good standing. Minimum 2 years of trade experience (trade license preferred). Strong customer service skills and professional demeanor, even under pressure. Ability to multitask and work independently with minimal supervision. Excellent attention to detail. CMMS/database experience is a plus. Strong organizational and teamwork skills. Ability to plan and manage workload under time constraints. Must be available for call-in work and additional duties as required. Physical & Safety Requirements: Ability to bend, stand, climb, and walk for extended periods. Ability to safely use manual tools and power equipment relevant to building maintenance. Understanding and use of proper PPE when required.

Working at the Racine Wastewater utility is more than a job, it is a career. Employees here are focused on protecting the health of our community and the ecosystem of Lake Michigan. Come join us and be part of our team! We offer what is important to our employees and to you: 1. A 7 am - 3pm, Monday - Friday schedule 2. A safe work environment 3. Paid vacation and holidays 4. High employee retention and stable employment 5. Health and dental insurance 6. Wisconsin Retirement System Pension 7. A place where your voice and opinion matter 8. A caring and understanding work environment POSITION PURPOSE: Performs skilled industrial electrician duties on the journeyman level in the installation, repair, and maintenance of wastewater systems and equipment. Essential Duties ESSENTIAL DUTIES: * Measures, cuts, installs and assembles electrical conduit using appropriate tools and equipment * Responsible for electrical and mechanical operations in addition to repairs of Racine Wastewater treatment plant, field maintenance garage, lift stations, safety sites and other sites maintained by the utility. * Plans layout and installs and repairs wiring, fixtures, apparatus, and control equipment * Installs or connects power cables to equipment and provides for proper grounding * Maintains and provides necessary repair to AC-DC control devices, AC-DC motors, commutators, transformers, cranes, hoists, elevators, batteries, power tools and appliances * Wires switchboards, switchgears, transformers, meters, UPS, relays, and PLC's * Tests continuity of circuits to ensure electrical compatibility and safety of components * Plans new or modified installations to minimize power failure, provide access for future maintenance and provide consistency with specifications and local regulations and code * May prepare sketches showing wiring location and utilize diagrams or blueprints in updating specifications and locations * Observes functioning of installed equipment to detect hazards and need for adjustments, relocation, or replacement * Performs related duties as assigned by Supervisor CONDITIONS OF EMPLOYMENT: * Ability to work under moderately safe and comfortable conditions where exposure to environmental factors such as toxic agents may cause some discomfort and where there is a risk of minor injury * Ability to work in year-round Wisconsin outdoor weather conditions with exposure to loud noises, damp, wet, and unpleasant odor * Ability to walk extensively, often while carrying tools and supplies, and work in a standing position for long stretches of time. Qualifications Minimum Qualifications * Journeyman electrician status with two years of progressive industrial experience * Ability to obtain Supervising Electrician Certification from City Electrical Inspector within 1 year or holds a Master License * Proficiency with computer applications, including Microsoft Office * Must possess a valid Wisconsin driver's license and have a good driving record * Wisconsin Department of Natural Resources General Wastewater Operator's License is desirable, but not required. Knowledge, Skills, and Abilities Required * Ability to apply good work practices by planning work and utilizing materials efficiently * Skill in analyzing, diagnosing, correcting mechanical failures and defects; including a working * knowledge of electrical functions, principles and techniques * Must have good electrical aptitude, verifiable by past work experience * Ability to use test equipment such as Multimeter, Megger, Amp Meter, etc. * Knowledge of generator operation and maintenance * Motor control & logic control knowledge * Knowledge of the installation and operation of 24,900 / 4,160 volt switchgear and feeders * Ability to test and diagnose failure in lighting and power circuits * Ability to work with and troubleshoot unit equipment * Understanding of alarm, communications, lighting, power systems, timing relays, and transformers * Knowledge and ability to connect circuits in main and distribution cabinets and boxes * Ability to lay out jobs from prints and sketches, select materials, and maintain records, descriptions, blueprints, costs, and files * Ability to solve problems of more than moderate difficulty with a minimum of supervision and direction Supplemental Information Physical and Mental Abilities Requirements Language Ability and Interpersonal Communication * Ability to effectively communicate with the general public * Ability to communicate with fellow employees to troubleshoot various unit processes * Ability to effectively communicate with equipment suppliers, vendors, salespeople, and contractors as it specifically relates to work involved in this position Physical Requirements * Ability to engage in strenuous physical activity including, but not limited to, stooping, standing, bending, kneeling, climbing, etc. * Ability to lift 50 pounds * Must have good dexterity and be in good physical condition and must not have a fear of heights (work off of ladders and scaffolds) * Must be able to enter and work in permitted confined spaces * Must be able to pass requirements for respirator use Equipment Used Vehicles, hand and power tools, hoists, instrumentation, personal protective equipment, various meters and equipment used in repair and installation of Network, PLC and other electronic systems This is intended to identify essential duties and also illustrates other types of duties that may be assigned. It should not be interpreted as describing all of the duties that will be required of an employee or be used to limit the nature and extent of assignments that an individual is required to perform. In addition to the responsibilities and duties listed, it is expected that employees maintain a consistent and reliable attendance record. Job descriptions are subject to revision at any time at the discretion of the Utility or City of Racine. The City of Racine is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, the City will provide reasonable accommodations to qualified individuals with disabilities and encourages both prospective and current employees to discuss potential accommodations with the employer.

Lakeshore Sport & Fitness is Chicago's #1 Destination for Sport, Fitness & Fun! Check out all we have to offer here: ******************************************* This position is at our Lincoln Park location. Team Member Perks! Complimentary Family Membership Complimentary Child Care for Staff Children Medical, Dental, Vision, Short & Long Term and Life Insurance Paid Time Off 401K Employee Financial Relief Program Daily Discounted Employee Meal Program Winter and Summer Team Member Celebrations Entrepreneurial and collaborative team environment 50% off club services Free Parking Lakeshore Sport & Fitness is seeking a skilled and motivated Electrician to join our facilities maintenance team. As an essential part of our team, you will be responsible for ensuring that our fitness facility's electrical systems are in top working condition. If you have a strong background in electrical work and enjoy a fast-paced, dynamic work environment, we want you to be part of our team! Key Responsibilities: Perform routine electrical maintenance and repairs throughout the fitness facility, including lighting systems, electrical panels, outlets, and wiring. Troubleshoot and resolve electrical issues efficiently, ensuring minimal disruption to operations. Install and maintain electrical systems for new equipment or facility upgrades. Work collaboratively with other team members to assist with various projects around the facility, including remodeling, expansion, and equipment installations. Ensure compliance with all safety regulations and local electrical codes. Communicate effectively with the facilities team and management to coordinate work and ensure the timely completion of tasks. Provide high-level customer service and respond quickly to emergency electrical issues as they arise. Ideal Candidate: Experienced electrician with a solid understanding of electrical systems and wiring in commercial settings. Strong ability to troubleshoot and solve electrical problems quickly and safely. Detail-oriented with a high standard for quality work. Excellent communication skills to coordinate with other departments and ensure smooth operations. Flexible and adaptable, able to jump into a variety of projects as needed. Previous experience working in a fitness facility or similar environment is a plus, but not required.

RRC SIFANG AMERICA INCORPORATED (“CRRC”) is a passenger railcar manufacturer in Chicago, Illinois. The passenger railcar manufacturing process includes 2 bargained-for work disciplines: assembly and electrical. The instant job description relates specifically to electrical work during the production of passenger railcars. Summary Electrical Workers are separated into 4 classifications/categories, namely Entry Level, Tier 1, Tier 2, and Tier 3. As specified below, said classifications are separated by, among other considerations, skill sets, experience, and proficiency. In general, Electrical Workers are responsible for wiring, assembling, connecting, and testing (specifically not including testing required during the commissioning process) electrical components on railcars under varying levels of supervision (depending on classification) while following drawings, schematics, procedures, and other written documentation, instructions, directives, and protocols. Electrical Workers will also participate in the testing/commissioning portion of the production process by providing support to Commissioning and Functional Engineers, and other high-level engineering and/or technical personnel, as directed, by specifically assisting with wiring for the continuity test, insulation test, and high voltage/potential (hipot) test. Essential Duties and Responsibilities Interpreting and using electrical schematics, drawings, process procedures, and other written documentation to prepare materials and tools, and to complete assembly of components; Sorting, routing, crimping, and terminating wires to electrical components; Using basic diagnostics tools such as multimeters to test, and trouble-shoot wire connections (not related to commissioning work), as required; Disassembling and recovering components for testing and commissioning, during the continuity, insulation, and high voltage/potential tests, as directed by Commissioning Engineers and other such specially-skilled personnel; Trimming and insulating stripped wiring utilizing heat shrink tubing; Disconnecting and restoring cable shunts and relevant tooling; Completing paperwork, such as quality confirmation forms, as required in the process; Following all safety protocols, and company policies and procedures; Complete work documentation; Maintaining a neat, clean, and organized work area; and Performing other tasks, as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Competencies and Characteristics To perform the job successfully, an individual should demonstrate the following competencies and have the following characteristics: Have the ability to work in a safe fashion Have the ability to produce a quality product Have great hand-eye coordination Have a technical aptitude (of varying degrees, depending on classification) Have the ability to bring value to the assigned project and to CRRC, as a whole Have the ability to troubleshoot, as necessary Have the ability to collaborate and coordinate with co-workers, supervisors, managers, and executive personnel in the Production Department and in other CRRC Departments Have the ability to communicate well with others Have the ability to draft documents of varying types Have the ability to meet work, task, and project deadlines Have the ability to multitask Have the ability to follow instructions properly and accurately Have flexibility with respect to the work schedule as warranted by operational/production needs and as permitted by the applicable Collective Bargaining Agreement Have excellent time management skills Have credibility and be trustworthy Work Environment Passenger railcar production facility with mobile equipment, heavy machinery, and high voltages Physical Demands · Ability to lift 40 lbs. Ability to climb, bend, stoop, kneel Ability to stand for an 8-hour shift Ability to step up and bend down inside or under a railcar Ability to remain in one position for a long period of time Ability to perform work in tight spaces with difficult access Required Education and Experience ♦Required of all candidates : Ability to read and interpret blueprints or ability to efficiently and effectively learn this part of the job if applying for an Entry Level Electrical Worker position Ability to use basic electrical work-related hand tools, such as screwdrivers, wrench and socket sets, wire strippers, cutters, and crimpers Ability to use basic pneumatic and power tools Ability to follow oral and written instructions Ability to read, write, and communicate in English High School Diploma or GED highly recommended ♦Depending on job classification, varying levels of electrical work experience, preferably in a fast-paced manufacturing setting : ► Entry Level classification: entry level with no prior relevant work experience required For Entry Level candidates: basic knowledge and hands-on skills with willingness and ability to be trained to do electrical work on and related to passenger railcars with regular supervision ► Tier 1 classification: some relevant prior work experience and proficiency required For Tier 1 candidates: working knowledge and hands-on skills with some relevant job experience in order to be able to complete basic tasks and undertake intermediate tasks with supervision and additional training OR having the foregoing knowledge and skills with work experience as an Electrical Worker (Entry Level) during Phase I and/or Phase II production at CRRC ► Tier 2 classification: more advanced relevant prior work experience and proficiency required For Tier 2 candidates: intermediate level knowledge, hands-on skills, proficiency, and experience to start and complete tasks without supervision, to direct and guide less skilled or experienced workers, and to assist Tier 3 workers, Foremen and Team Leads; demonstrated ability to produce a quality product with minimal abnormalities or reworks OR having the foregoing knowledge and skills with work experience as an Electrical Worker (either Entry Level and/or Tier 1) during Phase I and/or Phase II production at CRRC ► Tier 3 classification: very advanced technical skills, proficiency, and some supervisory experience/skills/capabilities For Tier 3 candidates: high level knowledge, hands-on skills, proficiency, and experience to start and complete tasks, to train less skilled and experienced workers with relevant tasks, and to provide significant assistance to Foremen and Team Leads including oversight of others' work; demonstrated ability to consistently produce a high-quality product; actual experience with or demonstrated capability to supervise less senior electricians OR having the foregoing knowledge and skills with work experience as an Electrical Worker (either Entry Level and/or Tier 1 and/or Tier 2) during Phase I and/or Phase II production at CRRC CRRC is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Salary Range: $18.91 - $29.03/hour Benefits Include: Medical, Dental, Vision, and Union Pension We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Northern Illinois University is a world-class, research-focused public institution that attracts students from across Illinois, the country and the world. NIU's vision is to be an engine for innovation to advance social mobility; promote personal, professional and intellectual growth; and transform the world through research, artistry, teaching and outreach. Our mission is to empower students through educational excellence and experiential learning as we pursue knowledge, share our research and artistry, and engage communities for the benefit of the region, state, nation and world. Under general direction of the Electrician Foreman or designee, the Electrician will perform all duties particular to and required in the trade of a journeyman electrician. This includes all electrical work requiring expertise in installing, modifying, preventative maintenance and repair of electrical equipment and system, distributions systems, fire/security systems, street lighting, emergency lighting, cameras, card access, etc. Position Summary The Electrician reports to the Electrical Foreman or designee. This individual receives written and oral instructions for the execution of their duties. This individual also interacts with other Physical Plant staff, Heating Plant staff, Grounds staff, Building Services staff, Residential Facilities, Support staff, outside contractors and vendors. Essential Duties and Responsibilities Scheduled Preventative Maintenance * Perform scheduled preventative maintenance tasks on electrical distributions systems, electrical motors, VFD's, Fire and Security systems, Emergency lighting, etc. * Assist other departments with preventative maintenance task Onsite Electrical Shop Duties * Perform journeyman level electrical work in the installation, operation, maintenance, modification, service and repair of both AC and DC electrical systems, equipment, fixtures and related electro-mechanical systems including transformers and distribution system * Inspect and test elements of electrical systems to locate and diagnose faults and malfunctions * Install, service, and repair lighting fixtures, electrical panels, outlets and wiring * Install, service, and repair fire alarm, security, and emergency lighting * Troubleshoot and repair all systems * Maintain strict adherence to relevant industry and employer safety standards Project Duties * Provide assistance during renovation of existing or on large-scale construction projects and other strategic initiatives * Be familiar with project costs and cost tracking * Follow cost-of-work practices with the budget Additional Duties * Assist with after-hours and weekend emergency "Call-Back" to supervise and/or perform repair jobs * Provide event support as assigned * Read and interpret blueprints, drawings, and sketches Other Duties as Assigned Minimum Required Qualifications (Civil Service) * High school diploma or equivalent. * Experience sufficient to qualify as a journeyman Electrician, with a minimum of five (5) years (60 months) of actual work in the trade, including apprenticeship or vocational training. The trade for this purpose shall include work normally performed by Electricians i.e. installing, maintaining, and/or repairing electrical systems, generators, transformers, motors and other electrical/electronic controls, electrical switchboard and other apparatus utilizing electricity, electrical, electronic and direct digital control systems, fire and alarm systems, and associated electrical, electronic and fiber optic equipment. Knowledge, Skills, and Abilities (KSAs) (Civil Service) * Skill in the use of tools and equipment. Specialty Factors (Civil Service) * Valid/current noncommercial Class D driver's license as required by the State of Illinois for the type of motor vehicle(s) to be operated by the incumbent. Preferred Qualifications (Civil Service) * The application and use of testing equipment utilized in checking, testing, and analyzing electrical systems such as Voltammeters, Voltage testers, Phase and Rotation testers, Multimeters, etc. * Regulatory codes i.e., local, city state and national electrical codes * Skill in interpreting schematic drawings, charts and technical instructions * Skills normally attributed to a Journeyman Electrician who has completed a recognized apprenticeship or vocational program * Ability to apply electrical formulas and conversions tables to job requirements * Ability to use hand and power tools applicable to trade * Ability to install, troubleshoot, and repair both mechanical locking and electronic access control devices * Ability to read and interpret blueprints and to lay out work from prints, tough plans, sketches, drawings and broken parts * Ability to problem solve and implement a maintenance solution * Ability to work with others in a large, diverse organization in a university climate * Ability to communicate clearly in a written and oral manner * Ability to understand mechanical systems * Ability to work with staff through supervision toward successful results * Ability to maintain good working relationships with personnel of other departments Minimum Required Qualifications (SPS) N/A Additional Requirements (SPS) N/A Preferred Qualifications (SPS) N/A Physical demands/requirements * Perform physical labor on construction and maintenance work where skill and experience are required * Ability to lift 80 pounds * Work at heights or depths of at least 30 feet or more * Must be able to work underground, in ceilings and in confined spaces and be able to maneuver and carry equipment to those locations * Must be able to speak clearly * Visual acuity to differentiate between color-coded piping * Ability to bend, crouch, kneel and reach overhead * Usually in and out of heated and protected areas; but, occasionally exposed to heat, cold, rain, snow, etc.