Apprentice electrician jobs in Baytown, TX

Bacon Plumbing, Heating, Air & Electric is looking for an experienced and motivated Journeyman Electrician. This role focuses on residential service, repairs, remodels, and new installations. The ideal candidate is customer-focused, safety-minded, and experienced working in occupied homes with professionalism and courtesy. Key Responsibilities Perform electrical installations, repairs, and upgrades in single-family homes, apartments, and residential remodel projects. Diagnose and troubleshoot electrical issues, providing accurate solutions and clear communication with homeowners. Install or replace panels, circuits, lighting, receptacles, switches, EV chargers, smart home devices, and other residential components. Run and bend conduit, pull wire, and complete clean, code-compliant workmanship. Read and follow residential blueprints and job plans. Maintain a clean and safe work environment inside customers' homes. Provide homeowners with explanations of work performed, recommendations, and safety findings. Complete work orders, material lists, and digital documentation. Follow all NEC standards, local codes, and company safety procedures. Mentor and support apprentices when assigned. Qualifications Valid Journeyman Electrician license (state-specific). 3-5+ years of residential electrical experience. Strong understanding of NEC as it applies to residential systems. Skilled in troubleshooting, diagnostics, and clean residential installations. Comfortable working in attics, crawl spaces, and tight areas. Professional communication and customer service skills. Valid driver's license and clean driving record. Preferred Skills Experience in residential service work and interacting directly with homeowners. Familiarity with smart home technology, energy-efficient lighting, and EV charging systems. Ability to upsell safety upgrades or recommended improvements (GFCI/AFCI, panel upgrades, surge protection). Proficiency with service management software What We Offer Competitive salary and performance-based bonuses. Health, dental, and retirement benefits. Opportunities for professional growth and leadership development. A collaborative and supportive work environment. Work Location: In person

An established electrical contractor specializing in ground-up construction, remodels, and service & maintenance is hiring Apprentice Electricians for key projects throughout Conroe, Northwest, and North Houston. What We Offer: Hands-on training and mentorship from experienced electricians Opportunities to gain experience on commercial installation, remodel, and service projects Competitive pay with overtime opportunities Safety-focused, supportive work environment Key Responsibilities: Assist journeyman electricians with installations, maintenance, and remodel projects. Pull wire, install conduit (EMT, PVC, etc.), and perform basic bending. Follow blueprints, schematics, and project instructions under supervision Maintain a safe and organized work area. Qualifications: Minimum 6 months of commercial electrical installation experience Valid Apprentice license on TDLR Ability to work full-time, including overtime as needed Reliable transportation to project sites Call today, interviewing now! TradeSTAR Office: 4001 Nations Dr. Houston TX 77505 Office: ************

Job DescriptionResponsibilities Assists in installation, alterations, additions and/or repairs of electrical systems, conductors and associated materials and equipment Helps Assemble, install, test, and maintain electrical or wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools Reads and interpret maps, instructional manuals, specifications, work site directions, blue prints and written instruction Performs physically demanding tasks, such as digging trenches to lay conduit and moving and lifting heavy objects Performs special projects and completes all other duties as assigned or requested for the general support of the field organization Requirements Possess Valid State of Texas Apprentice Electrician License and valid or pending B.A.T. certification, levels 1 - 8 Possesses valid Driver's License Ability to work from ladders, scaffolds and roofs to install, maintain or repair electrical wiring, equipment, and fixtures Ability to frequently walk, stoop, kneel, reach and climb in inclement weather with exposure to extreme cold, heat, noise & dust Ability to frequently lift, carry, push & pull up to 50 pounds of material & up to 90 pounds of material with assistance, if requested Benefits: 401(k) 401(k) matching Dental insurance Health insurance Life insurance Paid time off Vision insurance Powered by JazzHR MwvG6ziYVz

Summary/Objective An Apprentice 1st-4th, first semester electrical apprentice who is enrolled in a qualified (CEF or IEC) electrical apprenticeship program and has 0-8000 hours of actual on-the-job experience. Works under the guidance of a Journeyman level electrician assisting in the installation, alterations, additions, and/or repair of electrical systems, conductors, and associated materials and equipment on any type project Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Helps in securing, relocating and organizing materials, small tools, and equipment from and back to appropriate storage areas. Keeps work area clean by collecting and disposing of scrap, excess materials, and refuse. Keeps materials and tools clean and organized in an orderly fashion. Assists in pulling wire, lifting, hoisting and positioning materials. May operate less complicated hand tools and equipment under direct supervision of a Foreman or more senior electrician. Digs trenches by use of hand tools. Assists in mounting and strapping conduit. Assists more senior personnel in less complicated electrical installations, connections, and terminations under close supervision. Performs other project related duties and assignments as instructed by supervisor. Meets attendance standards and complies with late/absence notification procedures. Attends at least 144 hours of classroom instruction during each year of apprenticeship training, maintaining a minimum passing grade of 70. DOES NOT WORK ON ENERGIZED CIRCUITS OR EQUIPMENT. Skills/Competencies Basic Mathematical Skills Technical and Mechanical Capacity Communication Proficiency Ethical Capacity Supervisory Responsibility This position has no supervisory responsibilities. Work Environment While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling and climbing all day. The employee must frequently lift and move items over 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Position Type/Expected Hours of Work This is a full-time position. Days and hours of work vary, 40 hours per week, overtime may be required. Travel Job Sites can be located in multiple locations and out-of-area and overnight travel may be expected. . Preferred Education and Experience N/A Work Authorization/Security Clearance Must be authorized to work in the United States of America We are an EEO Employer Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job DescriptionSalary: We are seeking Apprentice commercial electriciansto join our team in Houston, TX (The TX Gulf Coast Region includes Houston and Greater Houston area.) As an apprentice commercial electrician, you will work under the guidance of experienced electricians to learn and develop the necessary skills to become a fully licensed electrician. This is a great opportunity for individuals who are passionate about the electrical trade and eager to gain hands-on experience in a variety of settings. Basic Qualifications: -Active TX ID or DL -Active Electrical License -Social Security Card -Tools -Reliable Transportation Duties/Skills/Physical Requirements: - Assist with the installation, maintenance, and repair of electrical systems commercial settings - Learn to read and interpret blueprints, schematics, and technical drawings - Assist in troubleshooting electrical issues and making necessary repairs - Perform basic electrical tasks such as wiring, conduit bending, and circuit installation - Learn to use hand tools and power tools safely and effectively - Follow all safety protocols and regulations to ensure a safe working environment - Collaborate with a team of electricians to complete projects efficiently and effectively -Clear communication skills are required for effective collaboration with team and other construction professionals - Knowledge of high voltage systems - Experience working as a commercial electrician - Knowledge of NEC (National Electrical Code) regulations- Strong understanding of electrical principles and concepts - Basic knowledge of electrical principles and concepts - Familiarity with hand tools and power tools used in the electrical trade - Strong attention to detail and problem-solving skills -Commitment to safety protocols is essential, as the work involves handling potentially dangerous tools and equipment. -Must have the physical ability to perform tasks such as lifting, standing, and walking for extended periods. -The job may involve lifting heavy equipment -Must be able to safely work in various environmental conditions -The role can involve working at heights and in confined spaces. -A neat, clean, tidy, and professional appearance is always the EE standard -Expected work schedule hours: 40 per week Benefits & Perks: Competitive compensation Paid Vacation Paid Holidays (8.5 days) Health Insurance Dental & Vision Insurance (covered by Enterprise.) School Tuition Assistance Opportunities for career advancement Training and development programs 401K Retirement savings plan We offer competitive compensation and the opportunity for career growth within our organization. Job Type: Full-time Enterprise Electrical Core Values: (Greatness) Committed to Excellence (Accountability) Plan it, Do it, Own it (Mentorship) Learn it, Know it, Teach it (Teamwork) One Team, One Goal (Positivity) Positive Attitude Required

Whether you're a recent grad or a seasoned professional, you can experience meaningful career growth at Rosendin. Enjoy a true sense of ownership as you work with a proven industry leader on some of the most exciting and high-profile projects in the nation. We offer a wide range of job opportunities, competitive compensation, full benefits, an Employee Stock Ownership Plan and more. Construction Electrician 2 Years of Electrical Experience Required. Assist with installing new electrical systems and repairing existing electrical systems while maintaining compliance with national, state, and local electrical codes along with all Rosendin policies and procedures. Support activities at commercial, industrial, institutional and residential project locations. ESSENTIAL DUTIES AND RESPONSIBILITIES: Use industry related hand tools and power tools, under supervision. Assist the Inside Wireman with measuring, cutting, bending, threading and installing wire and electrical cable systems, conduit systems and other wire raceway systems. Assist the Inside Wireman with wires and cables within control centers, distribution boxes, transformers, transducers, switch gear, receptacles, switches, etc. Work with an Inside Wireman to splice and terminate wires at junction points. Clean, gather and transport materials to electricians on the construction site. Communicate effectively with Foremen and crew members. Maintain workflow schedule to ensure all Rosendin productivity objectives are met. Demonstrate the highest level of professionalism and courtesy when interacting with colleagues, customers and vendors. Adhere to all Rosendin's safety policies and procedures. SKILLS AND EXPERIENCE: The ability to read and understand electrical single line blueprints. Familiar with aspects of operation, maintenance and repair of electrical systems. Basic knowledge of tools and equipment and how to safely use them. PHYSICAL DEMANDS AND WORK ENVIRONMENT: This section reflects the physical demands and work environment that most people working in this occupation engage in during the course of a workday. However, these occupations often can be performed by those with disabilities and appropriate adaptations. Physical Demands: The employee may require the ability to do the following: Perform ladder climbing, wire pulling and conduit pulling. Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis Maintain a standing position for long periods of time while performing repetitive actions such as grasping or manipulating wires. Work off of ladders, man lifts or reach booms. Lift 50 lbs. from ground and pull 50 lbs. of force Must have use of feet, legs, hands and arms to climb and/or balance on scaffolding or ladders Must have use of arms, hands and fingers to reach, handle and feel cable, wires, tools and other equipment Must be able to work off of ladders, man lifts, or reach booms without fear of heights. Must be able to see and hear, or have corrected vision, both close and distant, and hearing Must be able to distinguish color coded wires Must be able to adjust vision focus and use peripheral vision and depth perception. Working Environment: While performing duties of this job, the employee may be exposed to: A variety of weather conditions including cold, snow, rain, heat, etc. High noise levels Work is sometimes noisy, cramped, and dirty Hazards include risk of electrical shock and other work-site accidents 40-hour workweek is normal, however, if offered, working overtime may be included; electricians may work nights or weekends Our success is rooted in our people. We all come together around long-term vision and a sense of shared ownership. As a group, we do whatever it takes to ensure the success of our business…and your career. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job Description We are currently in need of a experienced and skilled Apprentice Electrician to join our team. We are looking for a long term employee who will grow with Right Touch Electrical. We pay our apprentice electricians $12-18 per hour depending on your experience in the field. You must meet the following qualifications to apply: 1-2 years commercial experience Apprentice/Drivers License Works well with others Great communication/etiquette and customer service skills Maintain clean cut appearance at all times Great time management skills Able to work overtime hours Willing to work some Saturdays (No Sundays) Good character and integrity Able to pass drug test and background checks

Do you love working with your hands? Are you interested in construction and in becoming an electrician? Then the electrical apprentice position could be perfect for you! Electrical apprentices are able to earn a paycheck while learning the trade through firsthand experience. This position has a clear career path to becoming an electrician with the potential and opportunity to become a manager of a team and larger scope of work. Position Responsibilities The electrical apprentice is partnered with a licensed journeyman electrician and has on-the-job training (OJT) to become an electrician. You'll help perform electrical installations of a multifamily and commercial nature. Learn and perform all scopes of large-scale projects, from distribution to rough in, trim and deck work. Participate in official apprenticeship program and attend classes as required. Here's What We're Looking For Motivated individuals who want to learn the electrical trade and have a high school diploma or GED as well as reliable transportation. Successfully register, enroll and participate in an electrical apprenticeship program (and remain in good standing) until program is completed. Able to physically perform the essential functions of the job. Willing to learn electrical codes and other construction safety requirements. Demonstrate and uphold Power Design's core values, which include integrity, accountability, teamwork, innovation, and growth. Benefits and Perks Competitive salaries offered Exciting, award-winning workplace culture focused on employee appreciation, recognition, and fun Comprehensive medical, dental, vision, and life insurance offered Short and long-term disability plans 401k with company matching and Flexible Spending Accounts (FSA) options available Paid time off and company holidays provided Discounts to a variety of services, mental and physical wellness resources, free Care.com memberships, and other perks given to all Power Design team members Diversity and Inclusion At Power Design, we are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy, national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information, military and veteran status, and any other characteristic protected by applicable law. Power Design believes that diversity and inclusion among our teammates is paramount to our success as a national company, and we seek to recruit, develop, and retain the most talented people from a diverse candidate pool nationwide. About Us Power Design is a National Design Build Contractor, focused on innovative construction across multiple trades: electrical, mechanical, plumbing, and systems technologies. Since 1989, we've disrupted the industry by putting next-generation ideas to powerful, practical use because we care. We design breakthrough solutions that push the limits of what's possible by harnessing the collaborative power of our teams to elevate experiences and empower the communities where we live and work. In an industry that tends to look back, we're building better by staying grounded in our values, dedicated to our unique culture, and supportive of work-life balance - making us built to last. By investing in our people and doing things differently, we're designing what's next. To learn more, visit ********************** At Power Design, we are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy, national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information, military and veteran status, and any other characteristic protected by applicable law. Power Design believes that diversity and inclusion among our teammates is paramount to our success as a national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool nationwide

Job DescriptionBenefits: 401(k) matching Competitive salary Health insurance Opportunity for advancement Paid time off Training & development FMM is seeking a motivated professional to fill our Electrical Apprentice position. FMM is a maintenance and construction company servicing both residential and commercial clients nationwide. Job Summary: Responsible for servicing, troubleshooting, and repairing, or installing electrical components in a commercial setting. The person who occupies this position must not pose a direct threat to the health or safety of such an individual or others in the workplace. The below description shall not be construed as a complete listing of all miscellaneous, incidental, or similar duties, which may be required from day to day. Essential Job Duties: ( Included but not limited to) Must possess the ability to assist the lead Electrician in the following: Planning the layout and installation of electrical wiring, equipment, or fixtures, based on job specifications and local codes. connecting wires to circuit breakers, transformers, or other components. Testing electrical systems or continuity of circuits in electrical wiring, equipment, or fixtures Using testing devices, such as ohmmeters, voltmeters, or oscilloscopes, to ensure compatibility and safety of system. Use a variety of tools or equipment, such as power construction equipment, measuring devices, power tools, and testing equipment, such as oscilloscopes, ammeters, or test lamps. Inspect electrical systems, equipment, or components to identify hazards, defects, or the need for adjustment or repair, and to ensure compliance with codes. Place conduit and pipes, in walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes. Diagnose malfunctioning systems, apparatus, or components, using test equipment and hand tools to locate the cause of a breakdown and correct the problem. Must possess the ability to learn and follow directives from leads. Selecting and using training/instructional methods and procedures appropriate for the situation when learning or teaching new things. Install, maintain, and repair electrical systems and equipment in accordance with local, state, and national electrical codes. Perform electrical inspections and troubleshoot electrical issues. Read and interpret electrical blueprints, schematics, and diagrams. Install and connect wiring, outlets, switches, and fixtures. Test electrical systems for functionality and safety Collaborate with other tradespeople to complete projects on time and within budget. Ensure compliance with safety regulations and maintain a clean work area. Pre-job and Pre-task Planning Identify behavior and conditions, which jeopardize the safety of others. Question the need for additional safety precautions, if believed to be necessary for the safe completion of the job. Inspect all tools and equipment before each use to ensure good working conditions. Comply with site safety rules by following procedures and by wearing the prescribed PPE. Never take directions or changes to assigned work from Client personnel without first checking with the Supervisor. Attend daily toolbox safety meetings and scheduled training sessions. Inspect their work site continuously to ensure that unsafe conditions do not exist. Required Skills, Abilities, Education and Experience: Must adhere to safety protocol, and work in a drug-free environment. Must have knowledge of safety rules and regulations and learn client and company policy. Ability to handle multiple projects and make decisions using FMM's core values of Quality, Teamwork, Pride, Passion, and Integrity Proficient in computer, text, and email skills May perform other duties as assigned. Proficient in using power tools and electrical testing equipment. Knowledge of the National Electrical Code (NEC) Experience working with high voltage and low voltage systems. Strong understanding of electrical principles and concepts Ability to build and install electrical systems in commercial and residential settings. Familiarity with reading and interpreting electrical blueprints, schematics, and diagrams. Basic knowledge of frame carpentry for installation purposes Physical Requirements: Ability to pass a Fit for Duty Screening Position will require working in all weather (hot/cold muddy) conditions. High noise environment Regularly exposed to moving mechanical parts; and working around construction machinery. Must be able to lift to 50 lbs. Subject to repetitive use of hands/arms, and legs Hand/eye coordination Hearing and comprehension are necessary for giving and receiving directions. Will be performing tasks involving physical labor on construction projects. May operate hand and power tools of all types. Climb and maintain balance on steel/wood framework, stairs, ladders, and scaffolds. Required to use hands to grasp, lift, handle, carry objects on a frequent basis. Position may require prolonged bending/twisting, walking, crawling, crouching, kneeling, reaching overhead, squatting, pushing /pulling, or standing and lifting. Mental Requirements: Must be able to fulfill essential job functions in a consistent state of alertness and safe manner. Must have the ability to talk and communicate effectively with management/supervision. Reading and writing comprehension are necessary for giving and receiving directions to perform work and our safety policy. Ability to use math calculations. Must be able to work at various tempos and concentrate amid distractions. Decision making skills necessary. Detail-oriented; must be able to remember, examine, and observe details. Benefits: Health Insurance-FMM will pay 50% of the employee's premium. 401K Contribution-FMM will match employee contribution up to 3% Optional voluntary benefits Paid Time Off Paid Holidays Employee Assistance Program Company Provided Health Club membership. Company Provided iPad At FMM, we provide our clients with high quality, high value maintenance and constructions services while maintaining superior levels of communication, professionalism, integrity, and honestly with our staff, clients, suppliers, and professional associates. Our core values of Quality, Teamwork, Integrity, Safety, and Versatility are our driving force. If you are an individual who possesses these values, we look forward to hearing from you.

With over 18 years of experience and 100+ million-dollar projects completed, Hays Electrical Services provides excellent service to customers in industries like hospitality/multifamily, commercial, and solar. Hays Electrical Services approaches each project with a cooperative mindset, working with business owners, contractors, and subcontractors towards the common goal - successful project delivery. We are expanding our staff and seeking Licensed Apprentice Electricians to join the Hays Team in Galveston, TX. Job description We are seeking motivated and skilled Electricians to join our team. The ideal candidate will have minimum 3 years of experience in commercial, multi-family, and hospitality projects. This is an excellent opportunity to gain hands-on experience and develop your skills in a fast-paced and dynamic environment. Duties: Comply with regulations to ensure a safe working environment. Maintain accurate records of work performed, including time spent, materials used, and tasks completed. Stay updated on industry trends, advancements, and best practices to continuously improve technical skills. Qualifications: Apprentice Electrical license Previous experience working as an Apprentice in commercial, multi-family, and hospitality projects is highly desirable. Knowledge of electrical codes, regulations, and safety guidelines. Ability to read and interpret blueprints, diagrams, and technical drawings. Strong problem-solving skills and attention to detail. Excellent communication and teamwork abilities. Physical stamina and strength to perform manual labor and lift heavy objects. Reliable and punctual with a strong work ethic. Willing to travel Reliable transportation. Benefits: Stable employment with the 18-year-old company TONS OF WORK!! 401K Program (company matches) Medical, Dental, Vision, and Life insurance benefits Career advancement opportunities for outstanding performers. If you meet the qualifications outlined above and are ready to contribute your skills to the team at Hays Electrical Services, we encourage you to apply. Join us in providing exceptional service to our clients and supporting our company's operations. Apply now! Powered by JazzHR my6gSq7d5N

Responsibilities Assist in the installation, maintenance, and repair of electrical systems and equipment. Work alongside experienced electricians to learn best practices in electrical work. Utilize hand tools and power tools safely and effectively for various tasks. Read and interpret blueprints, schematics, and technical drawings to understand project requirements. Help with low voltage and high voltage wiring installations as needed. Participate in troubleshooting electrical issues using tools such as an ohmmeter. Follow National Electrical Code (NEC) guidelines to ensure compliance with safety standards. Maintain a clean and organized work environment on construction sites. Collaborate with team members to complete projects efficiently and effectively. Demonstrate ability to climb to heights over 6' above ground level Demonstrate strong written and verbal communication skills Ability to handle/left loads up to 50 pounds. Ability to work alone and be motivated to accomplish tasks in an efficient, safe and skillful manner without direct supervision Qualifications Demonstrate ability to climb to heights over 6' above ground level Demonstrate strong written and verbal communication skills Ability to lift up to 50 pounds. Familiarity with hand tools, power tools, and basic electrical equipment. Understanding of low voltage and high voltage systems. Knowledge of the National Electrical Code (NEC) is preferred. Ability to read blueprints, schematics, and construction documents accurately. Ability to work alone and be motivated to accomplish tasks in an efficient, safe and skillful manner without direct supervision

Yellowstone Local is proud to represent The Perfect Light, an industry leader in outdoor lighting and now expanding into residential electrical services. You're not just an electrician, you're a pro who wants more. More respect. More responsibility. More opportunity. If you're ready to help launch a brand-new division with a company trusted by tens of thousands of Texans, The Perfect Light wants you. What's in it for You? Competitive pay of $70,000 - $110,000, inclusive of bonuses and commissions Consistent year-round work with growth into new markets (starting in Houston, then Dallas) Full-time schedule with opportunities for overtime Yearly wage increases tied to skill development Company truck (your mobile billboard), stocked and ready An iPad with high-end software will be provided Paid training and hands-on development Career advancement opportunities as we build this new division Work with a passionate, customer-first team in a growing and stable company Why You'll Love It Here Be part of something new: You'll be a foundational hire in a growing electrical division Loyal customer base: 10,000+ homeowners already trust us with lighting; now we're expanding your services to them Respect the trade: We don't cut corners, we invest in tools, training, and YOU Team-first culture with strong leadership, clear goals, and no micromanaging A mission-driven company that creates joy for customers all year long Your New Role Serve residential customers in Houston, TX and surrounding areas with electrical repairs, upgrades, and installations Handle service calls and some planned maintenance or installations Troubleshoot, diagnose, and repair electrical systems including wiring, panels, breakers, and lighting Educate homeowners on your work, build trust, and offer service options Maintain a clean and professional appearance (your truck, your workspace, your attitude) Adhere to all safety procedures and company policies Represent The Perfect Light with pride, integrity, and a commitment to doing things the right way Hiring Expectations: Apply today, complete a quick phone screening, and get ready for an interview with our team to discuss your goals and experience. High school diploma or GED Minimum 3 years of experience in the electrical trade Must have at least a Wireman license; Journeyman license preferred ServiceTitan experience is a plus Valid driver's license and clean driving record Strong customer communication and sales-minded approach Familiar with residential electrical code, safety practices, and troubleshooting Ability to lift 50 - 75 lbs, climb ladders, and work in crawl spaces or tight areas Must be a self-starter with flexibility in hours and schedule Comfortable using power tools and electrical diagnostic equipment Able to pass a drug test The Perfect Light is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment regardless of race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, or veteran status. #yellow

SEC Energy is a single-source provider of natural gas compression equipment, parts and services to all segments of the oil & gas industry. From 50 to 8,000 horsepower, gas, electric or dual drive, SEC is capable of designing and fabricating equipment to meet each customer's specific operating requirements. SEC also provides production, processing, and treating equipment, and an expansive network of warehouses that service locations across the United States. SEC capabilities expand beyond tradition manufacturing to further include turnkey engineering services, truck-based service technicians, manufacturer parts, and power generation equipment. Essential Duties & Responsibilities: * Reads electrical schematics, specifications, shop notes, general arrangement and process flow diagrams and drawings. * Reads measuring devices such as electrical meters, tape measures, rulers and pressure gauges. * Mounts and installs electrical components such as control panels, junction boxes, switches, transmitters and level controllers. * Runs conduit and wire according to drawings, specifications, shop notes and other project documentation. * Performs electrical and mechanical tests on assembled components. * Disassembles components to replace defective parts or to prepare them for shipping. * Operates a variety of portable hand, electric and air powered tools such as tubing benders, torque wrenches, combination wrenches, sockets, ratchets, band saw and grinders. * Operates stationary tools such as large bore tubing benders, bench grinder, iron worker, drill press and chop saw. * On occasion operates lifting equipment such as overhead cranes and jib cranes. * Records serial numbers and other information as required in ITP (inspection test plan). * Reports problems to line supervisor for assistance. * Perform job duties in a safe manner and according to company safety procedures. * Reports potentially unsafe equipment and safety hazards to supervisor for immediate resolution. * Has extensive knowledge of electrical area classifications and codes. * Effectively follows oral and written instructions and communicates them to others as needed. * Establish and maintain effective working relationships with all departments and workers. * Actively participates in teaching and developing other employees. * Actively participates in product development and improvements. Required education or minimum level: * High school education (GED) Experience: * 4+ years in compression related assembly or field environment. Skills: * Mechanical aptitude. * Ability to read tape measures and rulers in increments of 1/16" * Basic mathematic ability to add and subtract fractions, decimals and whole numbers. * Must have basic knowledge of commonly-used concepts, practices, and procedures within the assembly department. * Must be familiar with Safety and OSHA requirements. Working Conditions: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Lifting up to 50 lbs. occasionally * Walking and standing frequently * Exposure to adverse weather, cramped conditions and some heavy lifting * Works in industrial/manufacturing settings, which may include exposure to various materials and chemicals, as well as extreme temperature conditions and loud machinery, and require appropriate personal protective equipment

Locomotive Mechanic / Electricians Locomotive Mechanics / Electricians needed. We are looking for someone with heavy electrical experience that is willing to learn to be a locomotive mechanic. Understanding of generating electricity with a diesel engine is a requirement. Training on locomotive repair will be provided if the candidate has an understanding of electrical systems and a desire to learn and work hard. Applicants experienced with heavy equipment electrical systems, maritime electrical systems, and other power generation systems are encouraged to apply. Summary: Inspect locomotives on a regular basis within prescribed standards to identify areas requiring repair or maintenance and performance of necessary repairs. Applies requirements of regulatory agencies, industry associations and company maintenance policies. Repairs and maintains electrical systems and diesel locomotives by performing the following duties. Essential Duties and Responsibilities: include the following. Other duties may be assigned. Reads job order and observes and listens to locomotive in operation to determine malfunction and to plan work procedures. Diagnose problems and make repairs to railroad equipment/locomotives. Diagnose and make repairs to locomotive safety equipment. Performs mechanical, airbrake and electrical repairs to EMD/GE diesel-electric locomotives. Installs new ignition systems, aligns locomotive wheels, changes or recharges batteries, and replaces transmissions and other parts. Overhauls engines. Examines protective guards, loose bolts, and specified safety devices on locomotives, and makes adjustments. Operates a variety of equipment such as cutting torch, welder, forklift, hand tools and electric meters. Lubricates moving parts and operates repaired locomotive to verify conformance to specifications. Fabricates special lifting or towing attachments, hydraulic systems, shields, or other devices according to blueprints or schematic drawings. Must be willing to travel and work out of home area up to five days per week (overnight) on a continual basis. As directed performs activities of co-workers. Must be willing to work shift and/or overtime hours during the week and/or weekends as dictated by operations. In order to appropriately perform the essential duties of this job, regular work attendance is required. Competency: To perform the job successfully, an individual should demonstrate the following competencies : Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in-group problem solving situations; Uses reason even when dealing with emotional topics. Customer Service - Manages difficult or emotional customer situations; Responds promptly to customer needs; Solicits customer feedback to improve service ; Responds to requests for service and assistance; Meets commitments. Interpersonal Skills - Focuses on solving conflict, not blaming; Maintains confidentiality; Listens to others without interrupting; Keeps emotions under control; Remains open to others' ideas and tries new things. Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings. Written Communication - Writes clearly and informatively; Edits work for spelling and grammar; Varies writing style to meet needs; Presents numerical data effectively; Able to read and interpret written information. Teamwork - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed. Cost Consciousness - Works within approved budget; Contributes to profits and revenue; Conserves organizational resources. Diversity - Demonstrates knowledge of EEO policy; Shows respect and sensitivity for cultural differences; Educates others on the value of diversity; Promotes a harassment-free environment; Builds a diverse workforce. Ethics - Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values. Organizational Support - Follows policies and procedures; Completes administrative tasks correctly and on time; Supports organization's goals and values; Benefits organization through outside activities; Supports affirmative action and respects diversity. Judgement - Displays willingness to make decisions; Exhibits sound and accurate judgment; Supports and explains reasoning for decisions; Includes appropriate people in decision-making process; Makes timely decisions. Motivation - Sets and achieves challenging goals; Demonstrates persistence and overcomes obstacles; Measures self against standard of excellence; Takes calculated risks to accomplish goals. Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources; Sets goals and objectives; Organizes or schedules other people and their tasks; Develops realistic action plans. Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly. Safety and Security - Observes safety and security procedures; Reports potentially unsafe conditions ; Uses equipment and materials properly. Adaptability - Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events. Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent; Arrives at meetings and appointments on time. Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals.; Completes tasks on time or notifies appropriate person with an alternate plan. Initiative - Volunteers readily; Undertakes self-development activities; Seeks increased responsibilities; Takes independent actions and calculated risks; Looks for and takes advantage of opportunities; Asks for and offers help when needed. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: One year certificate from college or technical school; or three to six months related experience and/or training; or equivalent combination of education and experience. Language Skills: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Ability to read and interpret locomotive blueprints in order to make repairs and adjustments. Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: N/A Certificates, Licenses, Registrations: Must possess and maintain a valid motor vehicle operator's driver license and have the willingness to use personal and/or company vehicle in the course of employment. Must pass and complete Safety Training as required by customers to work in their facilities and as required by TGS at all TGS, Inc. locations. Other Skills and Abilities: Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. The employee is frequently required to stand; sit and taste or smell. The employee must regularly lift and /or move up to 25 pounds, frequently lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts; outside weather conditions and vibration. The employee is frequently exposed to high, precarious places and risk of electrical shock. The employee is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually loud.

Job DescriptionSalary: 18-23 Run electrical Conduit Read Electrical Drawings Pull low voltage Cables Generate materiallist Update supervisoron project status Ability to complete/coordinate project with minimal direction Must have min 3 years Experience running 3/4 and 1-inch conduit. Responsibilities: This Position requires running conduit, pulling wires making termination of low voltage wires. Must have yourown transportation and appropriate tools. This is a full time position.Houston and surrounding areas. MUST be proficient in installing conduit Qualifications: Must have 3 years commercial electrical experience Salary: $18.00 to $23.00 /hour Additional Compensation: Health insurance Vision Dental Paid Holidays PaidVacation

For over 50 years, Texas Water Utilities has been a trusted provider of water and wastewater utility services. Today, we serve over 143,000 customers in 207 Texas communities. Our service area reaches throughout the state of Texas from Mitchell County in central Texas to Matagorda on the Gulf Shores. It all starts with our people - proud members of their communities, dedicated to delivering safe, reliable, and cost-effective water utility services. Overview To maintain, repair or replace pumps, motors, electrical and SCADA equipment in place at water and wastewater facilities. What We Offer * 401k Company Match: 100% of the first 4% of your eligible compensation contributed to the Plan * Vacation Accrual: Starting at 3 weeks per year * Holidays: 10 company-paid holidays per year * Floating Time: 16 hours of paid floating time per year * Additional Benefit Plans include Medical, Dental, Vision, Company-Paid Life Insurance and more * Training, Professional Certifications, and Education Allowance What You'll Do ESSENTIAL FUNCTIONS Reasonable Accommodations Statement To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Essential Functions Statement(s) * Inspect and maintain pumps, motors, SCADA, and controls in working order, troubleshooting problems as they arise. * Rewire controls and replace electrical components. * Program, install and troubleshoot remote monitoring systems. * Troubleshoot and restore power to facilities. * Make electrical repairs at company office facilities. * Assist operations and maintenance personnel as needed. What You'll Bring Education: Requires knowledge normally acquired through attainment of a high school diploma or GED plus advanced skills and technical knowledge attained by specialized courses and on-the-job training. Experience: 1-3 years related experience Computer Skills: Basic Skills Certificates & Licenses Job requires employee to have at minimum an electrician license. Employee also needs to obtain at a minimum "D" water and wastewater licensing within one year. Other Requirements Work consists of standard procedures and tasks where basic analytical ability is required to select the correct action. Supervisor assigns tasks and provides assistance with no-routine matters; employee works independently within established guidelines and/or timeframes. Job requires occasional irregular hours and being on-call 24 hours a day. Requires interaction and cooperation with co-workers to resolve problems and obtain necessary information. Requires climbing, working in a tight place, stooping, bending, kneeling, crouching, lifting, etc. associated with accessing and repairing equipment. Equipment used includes, hand and mechanical tools, electrical testing equipment, truck for transportation to job sites. Work Environment Work is performed primarily outside and in water and wastewater facilities. Worker is subjected to adverse weather conditions, including temperature extremes, humidity and precipitation; noise and vibration from heavy equipment, physical hazards from moving machines, and equipment with moving parts, traffic, hazardous chemicals, and bacteria in wastewater. We are a proud Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or any characteristic or condition protected by Federal, state, or local law. We are an E-Verify participating employer.

About us: Through its global network, Thermon provides safe, reliable and innovative mission critical industrial process heating solutions. Thermon serves the energy, power generation, chemical, food and beverage, commercial, rail and transit and other industries to provide innovative solutions for industrial heating applications by deeply understanding our customers' needs. We specialize in providing complete flow assurance, process heating, temperature maintenance, freeze protection and environmental monitoring solutions. We transfer the WARMTH needed to make life Work. At Thermon, we don't just create jobs; we develop careers. Thermon has become a global leader in industrial heating due, in no small part, to our employees' hard work and dedication. To help foster those employees, we've created a company culture that encourages our values of Care, Commit and Collaborate. The Role Must be able to maintain an orderly in-field stock of materials, deliver materials to work stations in a prompt and precise manner, and assist/make cable pulls, running conduit, and erecting cable tray. Rate will depend on experience and passing electrician test. What You Will Do * Testing electrical and mechanical circuits for efficiency. * Testing, Reading, Operating, Maintaining, Repairing Electrical and Heat Trace systems. * Reading and comprehending electrical blue prints, schematics, one-line diagrams. * Install, test, and commission Electric Heat Tracing. * Following electrical codes and regulations set by the State of Texas and the US Gov. Proficient in reading and following directions, writing reports. * Unload delivery trucks. * Assembling, installing, maintaining, and repairing electrical and mechanical systems. * Performing maintenance and repair of electrical, interior, and exterior electrical components. * Available for Schooling and training. * Have your own hand tools. To be successful in this role you will possess * Industrial Construction Experience in a fast-paced business environment is a plus * High school and or trade school required. * Must put safety above all * Electrical License * NCCER certification/or equivalent work experience. * TWIC card required (Transportation worker Identification card) * Industrial experience. SCADA, PLC and Control Automation i.e. Energy Management Controls preferred * Proven history of leading, teaching, developing, and mentoring others successfully is a plus. * Professional, Organized and dedicated * Ability to handle stressful situations * Excellent communication and personal skills * Must be able to understand and communicate in English * Ability to perform work in industrial facilities in extreme ambient conditions including climbing staircases, ladders or We wish to thank all applicants for their interest, however, only those invited for an interview will be contacted. **********************************

Apprentice Electricians (All Levels Needed) Pay Rate: $0.00/hr Shift: Description: Now Hiring Licensed Apprentice Electricians Northwest Houston (Willowbrook) Start Immediately! Are you a Licensed Apprentice Electrician looking for steady work, growth opportunities, and a chance to build your skills on a key Northwest Houston project? TradeSTAR is hiring Commercial Apprentice Electricians of all experience levels to join one of our trusted client partners on a high-profile job in the Willowbrook area. If you re reliable, motivated, and ready to work full-time (with OT available), this is your next step forward. About the Opportunity / What You ll Do You ll work alongside experienced electricians on commercial construction projects in the NW Houston area. Your daily work may include: Pulling wire and installing EMT conduit Bending pipe and installing junction boxes, receptacles, and lighting Assisting with cable tray installation, grounding, and basic terminations Reading and understanding blueprints and schematics Supporting panel work, hardware installation, and general layout Working safely and efficiently in a fast-paced commercial environment Qualifications / Who You Are We are looking for Licensed Apprentice Electricians with 3 months of experience up to several years. Ideal candidates bring: A current Texas Apprentice Electrician License 3 months+ experience in commercial electrical work (pulling wire, basic terminations, conduit work) Familiarity with prints, hand tools, and electrical hardware A strong work ethic and ability to work overtime when needed Reliable transportation Why TradeSTAR At TradeSTAR, you re treated like a professional in a respected craft never just a number. We help you build real experience with top electrical contractors across Texas while offering: Competitive weekly pay Access to leading commercial contractors 401(k) with company match Medical benefits options Paid holidays Career guidance and long-term placement opportunities Dedicated recruiters who understand the electrical trade Compensation & Benefits Pay: Competitive hourly rates based on experience Weekly pay with direct deposit 401(k) with match, medical options, paid holidays Call to Action Ready to get to work in Northwest Houston? Apply today and start your next project this week! Contact TradeSTAR Houston TradeSTAR Houston Office 4001 Nations Dr. Pasadena, TX 77505 Phone: ************ Office Hours: Monday Friday, 8 AM 5 PM

We are seeking Apprentice commercial electricians to join our team in Houston, TX (The TX Gulf Coast Region includes Houston and Greater Houston area.) As an apprentice commercial electrician, you will work under the guidance of experienced electricians to learn and develop the necessary skills to become a fully licensed electrician. This is a great opportunity for individuals who are passionate about the electrical trade and eager to gain hands-on experience in a variety of settings. Basic Qualifications: -Active TX ID or DL -Active Electrical License -Social Security Card -Tools -Reliable Transportation Duties/Skills/Physical Requirements: - Assist with the installation, maintenance, and repair of electrical systems commercial settings - Learn to read and interpret blueprints, schematics, and technical drawings - Assist in troubleshooting electrical issues and making necessary repairs - Perform basic electrical tasks such as wiring, conduit bending, and circuit installation - Learn to use hand tools and power tools safely and effectively - Follow all safety protocols and regulations to ensure a safe working environment - Collaborate with a team of electricians to complete projects efficiently and effectively -Clear communication skills are required for effective collaboration with team and other construction professionals - Knowledge of high voltage systems - Experience working as a commercial electrician - Knowledge of NEC (National Electrical Code) regulations- Strong understanding of electrical principles and concepts - Basic knowledge of electrical principles and concepts - Familiarity with hand tools and power tools used in the electrical trade - Strong attention to detail and problem-solving skills -Commitment to safety protocols is essential, as the work involves handling potentially dangerous tools and equipment. -Must have the physical ability to perform tasks such as lifting, standing, and walking for extended periods. -The job may involve lifting heavy equipment -Must be able to safely work in various environmental conditions -The role can involve working at heights and in confined spaces. -A neat, clean, tidy, and professional appearance is always the EE standard -Expected work schedule hours: 40 per week Benefits & Perks: Competitive compensation Paid Vacation Paid Holidays (8.5 days) Health Insurance Dental & Vision Insurance (covered by Enterprise.) School Tuition Assistance Opportunities for career advancement Training and development programs 401K Retirement savings plan We offer competitive compensation and the opportunity for career growth within our organization. Job Type: Full-time Enterprise Electrical Core Values: (Greatness) Committed to Excellence (Accountability) Plan it, Do it, Own it (Mentorship) Learn it, Know it, Teach it (Teamwork) One Team, One Goal (Positivity) Positive Attitude Required