Apprentice electrician jobs in Lake Charles, LA - 23 jobs

SCOPE: Plans layout, installs and repairs wiring, electrical fixtures, apparatus and control equipment. EDUCATION: All third-class Craftsmen shall exhibit the competency of the "NCCER Curriculum" through level IV and meet job description for their specified craft. QUALIFICATIONS AND EXPERIENCE: Minimum of two (2) years as an Electrician in refinery, chemical or petrochemical plant construction or maintenance, performing the work described herein. Must maintain state licensing (Journeyman/Apprentice) as required per company policy. Must be able to perform work within precise limits or standards of accuracy, make decisions based on measured criteria, read and understand drawings and specifications, visualize objects in three dimensions from flat drawings, read, understand and communicate safety instructions, signs and labels, be able to follow and communicate instructions, both verbally and written, and pass a craft-specific test. TYPICAL DUTIES AND RESPONSIBILITIES: Troubleshoot electrical problems. Identify work through print interpretation. Measures, cuts, bends, threads, assembles and installs electrical conduit using such tools as a hacksaw, pipe threader and conduit bender. Measures, cuts, splices and installs cable trays and wire ways. Pulls wiring, cables and grounds through cable tray, wire ways and conduit. Splices wires by stripping insulation from terminal leads with knife or pliers, twisting or soldering wires together and applying tape or terminal caps. Connects wiring to power equipment and lighting fixtures using hand tools. Installs control and distribution apparatus, such as switches, relays and circuit-breaker panels. Connects power cables to equipment, such as electric motors, switch gears, transformers and air switches. Tests continuity of circuits using such equipment as an ohmmeter or an oscilloscope. May repair faulty equipment or systems. Terminate cables in buckets (must be able to read one line drawings and other applicable electrical drawings). The above description covers the principal duties and responsibilities of the job. The description shall not, however, be construed as a complete listing of all miscellaneous, incidental or similar duties which may be required from day to day. LANGUAGE SKILLS: Ability to effectively verbally communicate directions from craft supervisors and respond to questions from clients, managers and fellow workers. MATHEMATICAL SKILLS: Ability to apply concepts such as fractions, percentages, ratios and proportions to practical situations. PHYSICAL DEMANDS: Must work easily and skillfully with hands, lift and carry objects weighing up to 50 pounds, see well (either normally or with correction), hear well (either naturally or with correction) in order to recognize safety alarms and signals and the various sounds of danger associated with construction or maintenance projects, climb and maintain balance on high ladders and scaffolds, stand, stoop, kneel, crouch and crawl, maneuver in tight working quarters, and work outdoors in extreme weather conditions associated with refinery, chemical or petrochemical facilities. Must be medically cleared for respirator usage. Must be able to wear properly fitting respirators. Must Constantly wear fall protection equipment, about 5 lbs., when leaving the ground to work in any area. A person's weight and tools/equipment including clothing must comply with manufacturer's specifications and/or restrictions related to use of ladders and/or fall protection equipment. Must be able to climb various heights. Project Manager must approve all variances based on availability of work not requiring fall protection equipment. WORK ENVIRONMENT: Normal work environment will be construction sites within operating plants. This will require exposure to outdoor weather conditions, loud noise, working near moving mechanical parts, electrical energy, construction equipment, vibration, fumes, chemicals and airborne particles. Pay range $28-$39 depending on skill level and project requirements/details.

1. Reads and understands blueprints. 2. Assists in modifying or planning new installations to minimize waste of materials and provide access for future maintenance. 3. Prepares sketches showing the location of wiring and equipment or follows diagrams or blueprints ensuring that concealed wiring is installed before the completion of future ceilings, and floorings. 4. Works around hazardous wiring. 5. Measures, cuts, bends, threads, assembles, and installs electrical conduit using rulers, hand tools, power tools. 6. Splices wires using hand tools, soldering equipment, tape or terminal gaps. 7. Connects wiring to lighting fixtures and power equipment using hand tools. 8. Installs control and distribution apparatus such as switches, relays, and circuit breaker panels. 9. Unwinds and pulls cable. 10. Connects power cable to equipment using hand tools. 11. Tests the installed equipment for safety and electrical compatibility. 12. Disassembles defective electrical equipment. 13. May assist in lifting, positioning, and securing of materials and work pieces during installation. 14. Cleans and performs minor maintenance activities on tools and equipment. 15. Maintains a clean and safe work environment. 16. Must be able to safely traverse uneven terrain with tools and building materials. 17. Must be able to climb vertical ladders and work above ground as necessary. 18. Performs a variety of tasks involving safe dexterous use of hand tools. 19. Safely operates power tools and equipment. 20. Typically requires a minimum of 48 months of industrial construction experience. **Auto req ID:** 23729BR **Project Name:** Woodside Louisiana LNG **Location:** Sulphur,LA **Shift:** Day Shift Bechtel is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity and expression, age, national origin, disability, citizenship status (except as authorized by law), protected veteran status, genetic information, and any other characteristic protected by federal, state or local law. Applicants with a disability, who require a reasonable accommodation for any part of the application or hiring process, may e-mail their request to ******************** or call *************** for assistance. Determinations on request for reasonable accommodation will be made on a case-by-case basis.

Industrial Journeyman Electricians will install, repair, and maintain electrical wiring, conduit, equipment, and fixtures. They will work on underground cable and conduit installation, terminating, and equipment installation. Must have 4+ years of experience as a Journeyman Industrial Electrician. Must possess all Knowledge Skills and Abilities for positions (see below). Must be able to meet all physical requirements. Must be able to work at heights in excess of 300 ft. Must have all required tools. Must have Electrical Apprentice License at a minimum. Must have reliable transportation. Read blueprints and specification to determine the scope of work: locations, quantities, and sizes of materials required. Identify all tools required for tasks. Identify safety risks and the precautions required to eliminate those risks. Cut, bend and run conduit as specified on blueprints. Install, modify and fabricate cable tray as necessary according to specifications. Pull the cable through specified pathways. Assemble and install electrical equipment. Terminate wires and cable to electrical equipment such as but not limited to breakers, control panels, and distribution systems. Test electrical components for continuity and proper voltage readings according to specifications. Inspect electrical equipment and components to identify hazards and to ensure the equipment is in good operational condition. Setup and maintain temporary power systems. Install and maintain grounding systems for all equipment and structures. Hoist equipment and tools into a location via bull rigging or crane. Other duties as assigned.

Industrial Journeyman Electricians will install, repair, and maintain electrical wiring, conduit, equipment, and fixtures. They will work on underground cable and conduit installation, terminating, and equipment installation.

Who We Are: For over 35 years, ISC has provided safe, high quality electrical, instrumentation and controls solutions to global leading industrial manufacturers. With offices in Baton Rouge, Beaumont, Houston, Corpus Christi and Columbus, as well as job sites around the country, ISC has grown our team as high 3,000+ associates and offers full-service engineering, construction, and maintenance solutions throughout the United States. The Position: We are looking for positive, energetic electricians with a wide variety of abilities to complement our experienced workforce. Applicants should have the ability to: * Fabricate and install rigid, aluminum, E.M.T., plasti-bond and P.V.C. conduit * Must have the ability to use mechanical and 2" - 4" hydraulic benders * Must be able to fabricate and install conduit supports * Must have the ability to install wire and cable by either hand or machine in cable trays * Must perform MCC and switchgear work * Must be able to perform troubleshooting on energized motor controls * Can fabricate and install breakers and fuses, cable trays, batteries, battery charger, buss duct, junction boxes, tagging, term, motors, and transformers * Can size thermal-overloads, breakers, and fuses * Able to terminate motors, transformers, stress cones and cable splicing * Understand the proper use of hydraulic tools * Can read blueprints and national electric code requirements * Knowledgeable in the use of electrical equipment testers including V.O.M., AMP meter and 1000-volt insulation tester * Knowledgeable in communication and applicable electrical OSHA rules and regulations Requirements: * TWIC card - (Transportation Worker Identification Credential); Go to TWIC website for more information * Ability to meet the cut score on the National Center for Construction Education and Research (NCCER) Skill Assessment. * Ability to pass a post-offer, pre-employment drug/alcohol test and applicable background checks. * Minimum 4 years craft-specific experience. Other Information: * Excellent wages and complete benefits package. * We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. * ISC evaluates and hires applicants for employment based exclusively upon the applicant's merit. No applicant will ever be required to pay money (or any other form of compensation) to an ISC employee in order to be hired by or considered for employment with the Company. * This announcement is not intended to be a complete listing of all similar, miscellaneous, or incidental, duties, which may be required from day-to-day. ISC utilizes the multi-skill concept and expects all associates to perform other job requirements. Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at Phone: ************ Email: ************* Equal Opportunity Employer, including disabled and veterans. If you want to view the Know Your Rights: Workplace Discrimination is Illegal poster, click HERE If you want to view the Pay Transparency Policy Statement, please click the link: English

Benefits: A positive and collaborative work environment Voluntary Life Insurance Short and Long Term Disability Medical, Dental and Vision 401K Matching (after 6 months of employment) Company work truck is provided * offered after 60 days of employment Licensed Electrician Full-Time | Competitive Pay | Leadership Role in Generator Installation Location: Lake Charles, LA Power Your Career with Generator Supercenter Generator Supercenter, Inc. is the nation's leading provider of home standby generator systems. We specialize in innovative energy solutions that promote clean, reliable power for homeowners and businesses. As we continue to grow, we are seeking a Licensed Electrician to lead electrical operations and ensure the quality, safety, and compliance of our installations. Position Overview As a Licensed Electrician, you will oversee and verify all electrical work related to generator installations, ensuring it meets code requirements and company standards. This position plays a key leadership role, supporting the project lifecycle from review and inspection to job site troubleshooting and performance testing. Responsibilities Pull wire, bend conduit, install and wire up electrical devices Trace wiring and troubleshoot problems Assist in load-testing generator packages Assist in other phases of preparation and setting of power generation equipment and products such as trenching, piping, mechanical components, and civil assembly for setting power generation packages Read wiring diagrams Perform proper installation of all electrical equipment required to complete fabrication of projects (i.e. brackets, conduit, wiring, end devices, panels, etc Be proficient with measuring and electrical testing equipment Promote good welfare among the company and its divisions Perform other duties as assigned Qualifications Must have previous electrical experience, some on-the-job training is available Must Hold a Journeyman Electrician or Residential wireman license. High School Diploma or GED AC and DC electrical experience is a plus Why Join Generator Supercenter? Competitive compensation based on licensure and experience Opportunity to lead and mentor a growing electrical team Industry-leading training and support Be part of a nationally recognized brand in home energy solutions Advancement opportunities in a rapidly growing industry Step into a leadership role that powers homes-and your career. Apply today to join Generator Supercenter as a Licensed Electrician. Compensation: $26.00 - $33.00 per hour Join The Generator Supercenter Family - Here it's not just some catchy phrase; it's a lifestyle. We're looking for amazing people who believe in helping others, through the sales, installation, and maintenance of whole home generators that empower our customers with peace of mind, security, and freedom. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to Generator Supercenter Corporate.

Job Description Tradesmen International is immediately hiring experienced Journeyman Electricians for projects located in the Minden, LA area. This is a first shift opportunity, and the pay rate is $32/hour based on experience plus $100/day per diem for Travelers 60+ miles from the job-site. If you are an Electrician and want to work alongside other proven craftsmen who emphasize safety, productivity, and superior craftsmanship, this is your chance to advance your career! Job Scope: Install complex conduit configurations Pull wire Terminations Hand bend conduit Make correct complex EMT piping bends with minimal waste or joints Install conduit stub ups for customer supplied equipment Install standard and more complex conduit and electrical components into buildings Install ups systems, DLO cables, and fire alarm panels Set and switch gears Responsibilities 5+ years of experience Knowledge of NEC codes, color codes, and American wire Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: Tradesmen+ Rewards Program - earn points for hours worked Vacation Pay Health insurance 401(k) profit-sharing savings plan Find our app, TradeGig, in the App store to see opportunities, set notifications and click to express interest! Tradesmen International is an EO employer - M/F/Veteran/Disability Click here to visit Tradesmen's full website.

UPLOAD: RESUME Applicant must have experience in carpentry, plumbing, electrical, air conditioning and other trades associated with maintenance. The position requires continuous standing, walking, climbing, bending, crouching, push/pulling, carrying, reaching overhead and lifting/lowering of 50+ pounds. The ability to work with others a must. Must be able to establish and maintain positive working relationships with school stakeholders, state and federal agencies and the general public. The background check will be done upon employment recommendation. You are not required to be fingerprinted to apply. DISCLAIMER The preceding job description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees to this job.

Electrician - CAM011SCompany: WorleyPrimary Location: USA-LA-CameronJob: ElectricianSchedule: Full-time Employment Type: EmployeeManagement Level: Individual ContributorInternational Transfer Opportunity: NoJob Posting: Jan 16, 2026, 4:53:53 PMUnposting Date: Feb 16, 2026, 5:59:00 AMContact Name - Internal: Marla Kay LandryReporting Manager Title: Area Construction Manager Building on our past. Ready for the future Worley is a global professional services company of energy, chemicals and resources experts. We partner with our customers to deliver projects and create value over the life of their assets. We're bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now. Position SummaryResponsible for reading blueprints and specification to determine the scope of work: location, quantities, and sizes of materials required. Identify all tools required for tasks and identify safety risks and the precautions required to eliminate those risks. Primary ResponsibilitiesMeasures, cuts, bends, threads, assembles and installs electrical conduit using such tools as a hacksaw, pipe threader, rules and conduit benders Installs control and distribution apparatus, such as switches, relays and circuit- breaker panels, and fastens in place with crews or bolts using hand or power tools Test continuity of circuit to insure electrical compatibility and safety of components using testing instruments such as ohmmeter, battery and buzzer and oscilloscope Observes functioning of installed equipment or system to determine hazards and need for adjustments, relocation, or replacement Disassembles and repairs defective electrical equipment or systems Qualifications· Minimum 4 years industrial construction/maintenance industry experience Ability to fabricate and install rigid & aluminum, E. M. T. , plasti-bond, and P. V. C. conduit Ability to use mechanical benders; use hydraulic benders 2” - 4”; fabricate and install conduit supports Ability to do wire and cable installation by hand, by machine, and in cable trays. Physical Requirements:· Climbing, Balancing, Stooping, Kneeling, Crouching, Crawling, Reaching, Standing, Walking, Pushing, Pulling, Lifting, Grasping, Feeling, Repetitive MotionsMoving forward together We're committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law. We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here. And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change. Recruitment fraud notice Worley has been notified of fraudulent employment inquiries and/or offers being made to prospective candidates. These activities have generally occurred via email but may occur by other means. Generally prospective candidates are being asked to provide detailed personal information and possibly being asked to pay application fees. Worley does NOT require any payment or fees from prospective candidates. Do not provide any personal/financial information whatsoever, and do not make any payments requested by any email or other communication requesting such data to secure employment with Worley or any of its subsidiaries. If you receive such a message, you are advised to contact your local law enforcement agency and provide any details you may have. If you are interested in employment with Worley, please view the career information on our website and follow application instructions for career opportunities for which you are qualified.

Plan, layout, install, and repair wiring, conduit, electrical fixtures, apparatus and control equipment. Certified Journeyman -Requires attainment of NCCER certifications written and/or practical or 5 years' experience as an Industrial Electrician. Responsibilities: Prepares sketches showing location of wiring and equipment or follows diagrams or blueprints ensuring that concealed wiring is installed before completion of future walls, ceilings, and flooring. Measures, cuts, bends, threads, assembles and installs electrical conduit using such tools as a hacksaw, pipe threader, rules and conduit benders. Pulls wiring through conduit, assisted by helper. Splices wires by stripping insulation from terminal leads with knife or pliers, twisting or soldering wires together and applying tape or terminal caps. Connects wiring to lighting fixtures and power equipment using hand tools. Installs control and distribution apparatus, such as switches, relays and circuit- breaker panels, and fastens in place with crews or bolts using hand or power tools. Connects power cables to equipment and installs grounding leads. Test continuity of circuit to ensure electrical compatibility and safety of components using testing instruments such as ohmmeter, battery and buzzer and oscilloscope. Observes functioning of installed equipment or system to determine hazards and need for adjustments, relocation, or replacement. Disassembles and repairs defective electrical equipment or systems. Load, transport and unload material, tools, equipment and supplies. Maintains tools and equipment. Be able to distinguish colors. Knowledge of certain procedures such as LOTO, etc. Responsible for observing and complying with all safety and project rules. Performs other duties as required. Rate information using personal judgment or standards that can be measured or checked. Work within precise limits or standards of accuracy. Perform a variety of duties which may change often. Perform arithmetical operations rapidly and accurately. See detail in objects or drawings as 3-dimensionsl objects. Inspect and maintain medium and low voltage switchgear breakers and know how to reset and perform charging operations on tripped breakers. Education and Experience: May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager. Physical Requirements: NP=Not Present, O=Occasionally (0-33%), F=Frequently (34-66%), C=Constantly (67-100%) Standing C Walking C Sitting F Pushing F Pulling F Climbing F Balancing F Bending F Stooping O Kneeling O Crouching O Crawling O Reaching C Handling C Fingering C Feeling C Vision C Hearing C Lifting (lbs) Carrying (lbs) 0-10 C 0-10 C 10-25 F 10-25 F 25-50 F 25-50 F We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

1. Reads and understands blueprints. 2. Assists in modifying or planning new installations to minimize waste of materials and provide access for future maintenance. 3. Prepares sketches showing the location of wiring and equipment or follows diagrams or blueprints ensuring that concealed wiring is installed before the completion of future ceilings, and floorings. 4. Works around hazardous wiring. 5. Measures, cuts, bends, threads, assembles, and installs electrical conduit using rulers, hand tools, power tools. 6. Splices wires using hand tools, soldering equipment, tape or terminal gaps. 7. Connects wiring to lighting fixtures and power equipment using hand tools. 8. Installs control and distribution apparatus such as switches, relays, and circuit breaker panels. 9. Unwinds and pulls cable. 10. Connects power cable to equipment using hand tools. 11. Tests the installed equipment for safety and electrical compatibility. 12. Disassembles defective electrical equipment. 13. May assist in lifting, positioning, and securing of materials and work pieces during installation. 14. Cleans and performs minor maintenance activities on tools and equipment. 15. Maintains a clean and safe work environment. 16. Must be able to safely traverse uneven terrain with tools and building materials. 17. Must be able to climb vertical ladders and work above ground as necessary. 18. Performs a variety of tasks involving safe dexterous use of hand tools. 19. Safely operates power tools and equipment. 20. Typically requires a minimum of 48 months of industrial construction experience.

Tradesmen International is immediately hiring experienced Journeyman Electricians for projects located in the Minden, LA area. This is a first shift opportunity, and the pay rate is $32/hour based on experience plus $100/day per diem for Travelers 60+ miles from the job-site. If you are an Electrician and want to work alongside other proven craftsmen who emphasize safety, productivity, and superior craftsmanship, this is your chance to advance your career! Job Scope: Install complex conduit configurations Pull wire Terminations Hand bend conduit Make correct complex EMT piping bends with minimal waste or joints Install conduit stub ups for customer supplied equipment Install standard and more complex conduit and electrical components into buildings Install ups systems, DLO cables, and fire alarm panels Set and switch gears Requirements 5+ years of experience Knowledge of NEC codes, color codes, and American wire Company Details Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: Tradesmen+ Rewards Program - earn points for hours worked Vacation Pay Health insurance 401(k) profit-sharing savings plan Find our app, TradeGig, in the App store to see opportunities, set notifications and click to express interest! Tradesmen International is an EO employer - M/F/Veteran/Disability Click here to visit Tradesmen's full website. Recruiter Name Isabel Payan Location US-LA-LAKE CHARLES

Qualification Highlights Must have 4+ years of experience as an Industrial Electrician Must have 2+ years in a supervisory role. Must possess all Knowledge Skills and Abilities for positions (see below). Must be able to meet all physical requirements. Must be able to work at heights in excess of 300 ft. Must have reliable transportation. Required Knowledge, Skills, and Abilities Must have prior working experience with Zachry Industrial, Inc. Must be able to read blueprints and schematics proficiently to perform duties. Must be able to demonstrate former knowledge and experience working on high voltage systems. Must have worked as an Industrial Electrician for a minimum of 4 years, and as a supervisor for at least 2 years. Must be able to manage and lead a crew of journeyman and helpers on daily and weekly operations. Must be able to keep records and report on the follow but not limited to: time, cost codes, equipment, personnel records, and operational updates. Must know basic electrical theory for example but not limited to ohms law. Must be able to install and modify cable tray using hand tools and power tools. Must be able to bend and cut conduit using hand saws, hand tube bending equipment as well as power and hydraulic cutting and tube bending devices. Must be proficient in cable pulling methods use to run the cable through specified pathways. Must be able to use specialized electrical tools such as but not limited to ohm meters, multi-meters, and terminating devices. Must be able to terminate both High and low voltage equipment and cable/wiring. Must have mechanical and electrical knowledge of components relative to a New Construction Plant. Must be able to troubleshoot equipment and systems for electrical malfunctions. Must be able to identify different types, gauges, and color of cables and wires. Must be able to follow instructions correctly. Must be reliable, accountable, and consistent in performing administrative processes. Must be able to illustrate knowledge and experience of working with a lock out tag out system. Must be willing and able to follow all instructed safety regulations. Must be able to make it work on time and work the designated schedule and any overtime as needed with the proper notification. Preferred Additional Qualification Current Zachry or Zachry ROF'ed employee. Prior working experience with Zachry. Licensed Journeyman Electrician. National Center for Construction Education and Research's (NCCER) certification for Industrial Journeyman Electrician. Formal/technical education. Reporting to: This position will lead and manage a crew of journeyman and helpers. The crew size may vary, but the average span of control for this positions is between 5-15 workers. Physical Requirements Employee will be required to adhere to large amounts of standing, walking, bending, squatting, sitting and lifting. Will talk and hear to communicate. Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools. May be required to pick up, lift, carry and move up to 50lbs. Will work at heights, climb ladders and stairways, and may occasionally work off of platforms/scaffolding using the appropriate fall protection requirements. Must be able to work in all weather conditions (including heat, rain, cold and wind) while wearing appropriate PPE. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/spoggles, ear plugs, masks/respirators, hi-vis safety vests, leather gloves and leather steel-toed work boots. ZACHRY is dedicated to providing a Safe and Drug-Free work environment and is an Equal Opportunity Employer. Position Responsibilities Read blueprints and specification to determine the scope of work: locations, quantities, and sizes of materials required. Identify all tools required for tasks. Identify safety risks and the precautions required to eliminate those risks. Lead crew in daily safe operations. Manage workloads, supplies, equipment, and reporting. Cut, bend and run conduit as specified on blueprints. Install, modify and fabricate cable tray as necessary according to specifications. Pull the cable through specified pathways. Assemble and install electrical equipment. Terminate wires and cable to electrical equipment such as but not limited to breakers, control panels, and distribution systems. Test electrical components for continuity and proper voltage readings according to specifications. Inspect electrical equipment and components to identify hazards and to ensure the equipment is in good operational condition. Setup and maintain temporary power systems. Install and maintain grounding systems for all equipment and structures. Hoist equipment and tools into a location via bull rigging or crane.

Qualification Highlights * Must have 4+ years of experience as an Industrial Electrician * Must have 2+ years in a supervisory role. * Must possess all Knowledge Skills and Abilities for positions (see below). * Must be able to meet all physical requirements. * Must be able to work at heights in excess of 300 ft. * Must have reliable transportation.

Electrician General Foreperson - CAM011QCompany: WorleyPrimary Location: USA-LA-CameronJob: ElectricianSchedule: Full-time Employment Type: EmployeeManagement Level: SupervisorInternational Transfer Opportunity: NoJob Posting: Jan 16, 2026, 4:42:31 PMUnposting Date: Feb 16, 2026, 5:59:00 AMContact Name - Internal: Marla Kay LandryReporting Manager Title: Area Construction Manager Building on our past. Ready for the future Worley is a global professional services company of energy, chemicals and resources experts. We partner with customers to deliver projects and create value over the life of their assets. We're bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now. Position SummaryThe General Foreperson must have the ability to perform the duties and responsibilities assigned by his/her immediate supervisor; provide the necessary information, drawings, specifications, materials, tools, and equipment needed for crew(s) to accomplish the work. Primary ResponsibilitiesAssist in planning and scheduling; enforce safe practices and job safety programs Monitor all paperwork for accuracy, clarity and completeness; analyze the work to find a more productive cost-efficient method Monitor performance and provide written evaluation, assistance and training to all assigned employees Prepare employees for additional responsibilities; and keep the proper management informed of all significant information Qualifications· Minimum 6 years industrial construction/maintenance industry experience· NCEER Certified Plus (Preferred)· Supervisory experience (Preferred) Physical RequirementsClimbing, Balancing, Stooping, Kneeling, Crouching, Crawling, Reaching, Standing, Walking, Pushing, Pulling, Lifting, Grasping, Feeling, Repetitive MotionsMoving forward together We're committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law. We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here. And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change. Recruitment fraud notice Worley has been notified of fraudulent employment inquiries and/or offers being made to prospective candidates. These activities have generally occurred via email but may occur by other means. Generally prospective candidates are being asked to provide detailed personal information and possibly being asked to pay application fees. Worley does NOT require any payment or fees from prospective candidates. Do not provide any personal/financial information whatsoever, and do not make any payments requested by any email or other communication requesting such data to secure employment with Worley or any of its subsidiaries. If you receive such a message, you are advised to contact your local law enforcement agency and provide any details you may have. If you are interested in employment with Worley, please view the career information on our website and follow application instructions for career opportunities for which you are qualified.

Plan, layout, install, and repair wiring, conduit, electrical fixtures, apparatus and control equipment. Certified Journeyman -Requires attainment of NCCER certifications written and/or practical or 5 years' experience as an Industrial Electrician. Responsibilities: * Prepares sketches showing location of wiring and equipment or follows diagrams or blueprints ensuring that concealed wiring is installed before completion of future walls, ceilings, and flooring. * Measures, cuts, bends, threads, assembles and installs electrical conduit using such tools as a hacksaw, pipe threader, rules and conduit benders. * Pulls wiring through conduit, assisted by helper. * Splices wires by stripping insulation from terminal leads with knife or pliers, twisting or soldering wires together and applying tape or terminal caps. * Connects wiring to lighting fixtures and power equipment using hand tools. * Installs control and distribution apparatus, such as switches, relays and circuit- breaker panels, and fastens in place with crews or bolts using hand or power tools. * Connects power cables to equipment and installs grounding leads. * Test continuity of circuit to ensure electrical compatibility and safety of components using testing instruments such as ohmmeter, battery and buzzer and oscilloscope. * Observes functioning of installed equipment or system to determine hazards and need for adjustments, relocation, or replacement. * Disassembles and repairs defective electrical equipment or systems. * Load, transport and unload material, tools, equipment and supplies. * Maintains tools and equipment. * Be able to distinguish colors. * Knowledge of certain procedures such as LOTO, etc. * Responsible for observing and complying with all safety and project rules. Performs other duties as required. * Rate information using personal judgment or standards that can be measured or checked. * Work within precise limits or standards of accuracy. * Perform a variety of duties which may change often. * Perform arithmetical operations rapidly and accurately. * See detail in objects or drawings as 3-dimensionsl objects. * Inspect and maintain medium and low voltage switchgear breakers and know how to reset and perform charging operations on tripped breakers. Education and Experience: * May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. * Has knowledge of commonly-used concepts, practices, and procedures within a particular field. * Relies on instructions and pre-established guidelines to perform the functions of the job. * Works under immediate supervision. * Primary job functions do not typically require exercising independent judgment. * Typically reports to a supervisor or manager. Physical Requirements: NP=Not Present, O=Occasionally (0-33%), F=Frequently (34-66%), C=Constantly (67-100%) Standing C Walking C Sitting F Pushing F Pulling F Climbing F Balancing F Bending F Stooping O Kneeling O Crouching O Crawling O Reaching C Handling C Fingering C Feeling C Vision C Hearing C Lifting (lbs) Carrying (lbs) 0-10 C 0-10 C 10-25 F 10-25 F 25-50 F 25-50 F We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

1. Reads and understands blueprints. 2. Assists in modifying or planning new installations to minimize waste of materials and provide access for future maintenance. 3. Prepares sketches showing the location of wiring and equipment or follows diagrams or blueprints ensuring that concealed wiring is installed before the completion of future ceilings, and floorings. 4. Works around hazardous wiring. 5. Measures, cuts, bends, threads, assembles, and installs electrical conduit using rulers, hand tools, power tools. 6. Splices wires using hand tools, soldering equipment, tape or terminal gaps. 7. Connects wiring to lighting fixtures and power equipment using hand tools. 8. Installs control and distribution apparatus such as switches, relays, and circuit breaker panels. 9. Unwinds and pulls cable. 10. Connects power cable to equipment using hand tools. 11. Tests the installed equipment for safety and electrical compatibility. 12. Disassembles defective electrical equipment. 13. May assist in lifting, positioning, and securing of materials and work pieces during installation. 14. Cleans and performs minor maintenance activities on tools and equipment. 15. Maintains a clean and safe work environment. 16. Must be able to safely traverse uneven terrain with tools and building materials. 17. Must be able to climb vertical ladders and work above ground as necessary. 18. Performs a variety of tasks involving safe dexterous use of hand tools. 19. Safely operates power tools and equipment. 20. Typically requires a minimum of 48 months of industrial construction experience.

ZACHRY is currently seeking an Industrial Maintenance Journeyman Electricians for Chenier Sabine Pass, located in Cameron, Tx. NO PER DIEM OFFERED. Electrician will install, repair, and maintain electrical wiring, conduit, equipment, and fixtures. They will work on underground cable and conduit installation, terminating, and equipment installation. Qualification Highlights Must have 4+ years of experience as a Journeyman Industrial Electrician. Must possess all Knowledge Skills and Abilities for positions (see below). Must be able to meet all physical requirements. Must be able to work at heights more than 300 ft. Must have all required tools. Must have Electrical Apprentice License at a minimum. Must have reliable transportation. Position Responsibilities Read blueprints and specification to determine the scope of work: locations, quantities, and sizes of materials required. Identify all tools required for tasks. Identify safety risks and the precautions required to eliminate those risks. Cut, bend, and run conduit as specified on blueprints. Install, modify, and fabricate cable tray as necessary according to specifications. Pull the cable through specified pathways. Assemble and install electrical equipment. Terminate wires and cable to electrical equipment such as but not limited to breakers, control panels, and distribution systems. Test electrical components for continuity and proper voltage readings according to specifications. Inspect electrical equipment and components to identify hazards and to ensure the equipment is in good operational condition. Setup and maintain temporary power systems. Install and maintain grounding systems for all equipment and structures. Hoist equipment and tools into a location via bull rigging or crane. JOB REQUIREMENTS Required Knowledge, Skills, and Abilities Must be able to read blueprints and schematics proficiently to perform duties. Must be able to demonstrate former knowledge and experience working on high voltage systems. Must have worked as an Industrial electrical helper or as an Industrial Electrician for a minimum of 4 years. Must know basic electrical theory for example but not limited to ohms law. Must be able to install and modify cable tray using hand tools and power tools. Must be able to bend and cut conduit using hand saws, hand tube bending equipment as well as power and hydraulic cutting and tube bending devices. Must be proficient in cable pulling methods use to run the cable through specified pathways. Must be able to use specialized electrical tools such as but not limited to ohm meters, multi-meters, and terminating devices. Must be able to terminate both High and low voltage equipment and cable/wiring. Must have mechanical and electrical knowledge of components relative to a Liquefied Natural Gas Plant. Must be able to troubleshoot equipment and systems for electrical malfunctions. Must be able to identify different types, gauges, and color of cables and wires. Must be able to follow instructions correctly. Must be reliable, accountable, and consistent in performing administrative processes. Must be able to illustrate knowledge and experience of working with a lock out tag out system. Must be willing and able to follow all instructed safety regulations. Must be able to make it to work on time and work the designated schedule and any overtime as needed with the proper notification. Employee will be required to adhere to large amounts of standing, walking, bending, squatting, sitting and lifting. Will talk and hear to communicate. Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools. May be required to pick up, lift, carry and move up to 50lbs. Will work at heights, climb ladders and stairways, and may occasionally work off of platforms/scaffolding using the appropriate fall protection requirements. Must be able to work in all weather conditions (including heat, rain, cold and wind) while wearing appropriate PPE. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs, masks/respirators, hi-vis safety vests, leather gloves. CERTIFICATIONS AND/OR LICENSES REQUIRED * NCCER - Industrial Electrician OTHER POSITION OR SITE REQUIREMENTS VALID DL NCCER CERTIIFCATION APPRIETAINCE LIENSE CURRENT TWIC IN HAND Job Specific Requirements DOES THIS POSITION REQUIRE A COMPUTER? * No BACKGROUND CHECK * Yes REQUIREMENTS MEDICAL * Drug Screen Pre-Employment Physical SAFETY/ORIENTATION/TRAINING * Audio Basic Plus MVR Safety Council Scaffold User Site Specific

ZACHRY is currently seeking an Industrial Maintenance Journeyman Electricians for Chenier Sabine Pass, located in Cameron, Tx. NO PER DIEM OFFERED. Electrician will install, repair, and maintain electrical wiring, conduit, equipment, and fixtures. They will work on underground cable and conduit installation, terminating, and equipment installation. Qualification Highlights * Must have 4+ years of experience as a Journeyman Industrial Electrician. * Must possess all Knowledge Skills and Abilities for positions (see below). * Must be able to meet all physical requirements. * Must be able to work at heights more than 300 ft. * Must have all required tools. * Must have Electrical Apprentice License at a minimum. * Must have reliable transportation. Position Responsibilities * Read blueprints and specification to determine the scope of work: locations, quantities, and sizes of materials required. * Identify all tools required for tasks. * Identify safety risks and the precautions required to eliminate those risks. * Cut, bend, and run conduit as specified on blueprints. * Install, modify, and fabricate cable tray as necessary according to specifications. * Pull the cable through specified pathways. * Assemble and install electrical equipment. * Terminate wires and cable to electrical equipment such as but not limited to breakers, control panels, and distribution systems. * Test electrical components for continuity and proper voltage readings according to specifications. * Inspect electrical equipment and components to identify hazards and to ensure the equipment is in good operational condition. * Setup and maintain temporary power systems. * Install and maintain grounding systems for all equipment and structures. * Hoist equipment and tools into a location via bull rigging or crane. JOB REQUIREMENTS Required Knowledge, Skills, and Abilities * Must be able to read blueprints and schematics proficiently to perform duties. * Must be able to demonstrate former knowledge and experience working on high voltage systems. * Must have worked as an Industrial electrical helper or as an Industrial Electrician for a minimum of 4 years. * Must know basic electrical theory for example but not limited to ohms law. * Must be able to install and modify cable tray using hand tools and power tools. * Must be able to bend and cut conduit using hand saws, hand tube bending equipment as well as power and hydraulic cutting and tube bending devices. * Must be proficient in cable pulling methods use to run the cable through specified pathways. * Must be able to use specialized electrical tools such as but not limited to ohm meters, multi-meters, and terminating devices. * Must be able to terminate both High and low voltage equipment and cable/wiring. * Must have mechanical and electrical knowledge of components relative to a Liquefied Natural Gas Plant. * Must be able to troubleshoot equipment and systems for electrical malfunctions. * Must be able to identify different types, gauges, and color of cables and wires. * Must be able to follow instructions correctly. * Must be reliable, accountable, and consistent in performing administrative processes. * Must be able to illustrate knowledge and experience of working with a lock out tag out system. * Must be willing and able to follow all instructed safety regulations. * Must be able to make it to work on time and work the designated schedule and any overtime as needed with the proper notification. Employee will be required to adhere to large amounts of standing, walking, bending, squatting, sitting and lifting. Will talk and hear to communicate. Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools. May be required to pick up, lift, carry and move up to 50lbs. Will work at heights, climb ladders and stairways, and may occasionally work off of platforms/scaffolding using the appropriate fall protection requirements. Must be able to work in all weather conditions (including heat, rain, cold and wind) while wearing appropriate PPE. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs, masks/respirators, hi-vis safety vests, leather gloves. CERTIFICATIONS AND/OR LICENSES REQUIRED * NCCER - Industrial Electrician OTHER POSITION OR SITE REQUIREMENTS VALID DL NCCER CERTIIFCATION APPRIETAINCE LIENSE CURRENT TWIC IN HAND Job Specific Requirements DOES THIS POSITION REQUIRE A COMPUTER? * No BACKGROUND CHECK * Yes REQUIREMENTS MEDICAL * * Drug Screen * Pre-Employment Physical SAFETY/ORIENTATION/TRAINING * * Audio * Basic Plus * MVR * Safety Council * Scaffold User * Site Specific