Apprentice electrician jobs in Pasadena, CA - 204 jobs

Function as an Apprentice Electrician, under a certified or licensed Electrician for Bergelectric Corp. assist electricians with installing new electrical systems and repairing existing electrical systems while maintaining compliance with national, state, and local electrical codes along with all Bergelectric Corp. policies and procedures. Support activities at commercial, industrial, institutional and residential project locations. This is considered to be a safety sensitive position. Responsibilities Assist with the installation, repair, maintenance and testing of commercial, industrial and residential electrical systems in full support of Bergelectric Corp. safety, operations and productivity initiatives. Use industry related hand tools and power tools, under supervision. Assist the Electrician with measuring, cutting, bending, threading and installing wire and electrical cable systems, conduit systems and other wire raceway systems. Assist the Electrician with wires and cables within control centers, distribution boxes, transformers, transducers, switch gear, receptacles, switches, etc. Work with an Electrician to splice and terminate wires at junction points. Clean, gather and transport materials to electricians on the construction site. Communicate effectively with Foremen and crew members. Maintain workflow schedule to ensure all Bergelectric Corp. productivity objectives are met. Demonstrate the highest level of professionalism and courtesy when interacting with colleagues, customers and vendors. Adhere to all Bergelectric Corp.'s safety policies and procedures. Qualifications Must be currently enrolled or working on enrollment in an approved Apprentice program. Knowledge of electrical theory, basic circuits, branch circuits, and specialty systems. Knowledge of magnetic induction, three-phase transformers, conductors and wiring methods. The ability to read and understand electrical single line blueprints. Familiar with aspects of operation, maintenance and repair of electrical systems. Basic knowledge of tools and equipment and how to safely use them. Physical Demands Lift 50 lbs. from the ground and pull 50 lbs. of force. Perform ladder climbing, wire pulling and conduit pulling. Fully squat, stoop or kneel while wearing a 25 lbs. tool belt. Maintain a standing position for long periods of time while performing repetitive actions such as grasping or manipulating wires. Work off of ladders, man lifts or reach booms. Working Environment A variety of weather conditions including cold, snow, rain, heat, etc. High noise levels Salary Range USD $22.00 - USD $40.00 /Hr. Benefits Bergelectric is proud to offer a comprehensive benefits package, including medical, dental, vision, and a 401k retirement plan with employer matching. EEO Statement The information contained in the job description is for compliance with the Americans with Disabilities Act (ADA) and is not an exhaustive list of duties performed by this position. Additional duties are performed by the individuals currently holding this position and additional duties may be assigned by the Supervisor or their designee. Bergelectric is a Federal government contractor and subject to the requirements of the Office of Federal Contract Compliance Programs (OFCCP). We have listed the affirmative action laws that we are governed by and their implementing regulations for your easy reference: Executive Order 11246 including Pay Transparency Nondiscrimination Provision (41 C.F.R. part 60) The Vietnam Era Veterans Readjustment Assistant Act of 1974, as amended (41 C.F.R. 60-300) Section 503 of the Rehabilitation Act of 1973, as amended (41 C.F.R. 60-741)

Job Posting Start Date 12-04-2025 Job Posting End Date 02-27-2026 Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a/an Low Voltage Switchgear Wireman in USA, Fontana Ca. Reporting to the Production Manager, Low Voltage Switchgear Wireman is responsible for installing electrical components and wiring for our switchgear projects. What a typical day looks like: Read and interpret schematic drawings, diagrams, blueprints, specifications, work orders, or reports to determine material requirements or assembly instructions Assemble electrical systems and install components, units, subassemblies, wiring, or conduit using rivets, bolts, soldering or micro-welding equipment Run wire and cable according to schematics and blueprints. Adjust, repair, or replace electrical or electronic component parts to correct defects and to ensure conformance to specifications Clean parts, using cleaning solutions, air hoses, and cloths Drill or tap holes in specified equipment locations to mount control units or to provide openings for elements, wiring, or instruments. Confer with supervisors or engineers to plan, review work activities, or to resolve production problems Inspect or test wiring installations, assemblies, or circuits for resistance factors or for operation and record results Mark and tag components so that stock inventory can be tracked and identified May perform mechanical assembly of components for switchgear cabinets as needed Complete all other duties as assigned The experience we're looking to add to our team: High school diploma or equivalent 1-2 years of experience in wiring or installing electrical components OR completion of a technical vocational program Strong attention to detail and ability to perform work accurately Knowledge of manufacturing, equipment maintenance, and safety management Reading comprehension skills with the ability to interpret and follow written directions, blueprints, and engineering diagrams Basic math skills to meet technical specifications and measurements Basic understanding of tools (ex. Tape measure, impact drill, wire crimpers, etc. What the physical requirements are: Prolonged periods of standing, bending, kneeling, and performing repetitive tasks. Must be able to lift up to 35 pounds at a time. Must have manual dexterity in order to assemble products or machines as directed. Must have excellent hand-eye coordination. Ability to differentiate between colored wires, tabs, and electronic components. Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor #LI-GB1 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to California)$17.98 USD - $24.27 USD HourlyJob CategoryOperations Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).

Department: Operations Title: Apprentice Electrician Reports to: Foreman Electrician FLSA: Hourly/Non-Exempt Hours: 7am - 4pm, Mon-Fri As an Apprentice Electrician, you will work closely with our team to assist in the installation, maintenance, and troubleshooting of electric vehicle (EV) charging stations and associated electrical and network systems. This role provides hands-on experience and training, preparing you for a rewarding career as an electrician in the growing EV infrastructure sector. Key Responsibilities: Install Electrical Systems and Equipment: Assist in the installation of electrical systems and equipment necessary for the operation of electric vehicle charging stations, following installation plans as set forth by the foreman. Electrical Installations: Perform installations that include, but are not limited to: Electrical raceways and support systems Junction boxes Electrical panels Wiring and conduit installation Electric vehicle charging stations and associated network equipment Troubleshooting and Testing: Assist in troubleshooting, testing, and diagnosing issues with EV charging equipment and electrical systems to ensure proper operation and safety compliance. Adhere to Safety and Code Compliance: Follow all safety protocols, electrical codes, and regulations to ensure safe and compliant installations. Collaborate with Team Members: Work with the foreman, electricians, and other team members to complete projects efficiently and on schedule. Documentation and Reporting: Assist in maintaining accurate records of installations, testing results, and materials used during projects. Requirements Enrollment in or completion of an accredited electrical trainee program Basic understanding of electrical principles and construction practices Ability to read and interpret blueprints, wiring diagrams, and installation plans Familiarity with tools and materials used in electrical work Commitment to safety protocols and industry standards Excellent problem-solving skills and attention to detail Strong communication and teamwork abilities Physical ability to lift heavy objects, work at heights, and perform other physically demanding tasks Valid driver's license and satisfactory driving record What We Offer: Hands-on training with licensed electricians in a rapidly growing industry Opportunities for career growth and advancement Competitive compensation, tuition reimbursement and benefits package Salary Description $25.00-$34.50/hr. varies based on experience

Picture yourself spending your days in Disneyland, knowing you help keep attractions like Space Mountain and The Matterhorn up and running. Wouldn't it be cool to put your skills to work on the rides, restaurants and facilities of the “ Happiest Place on Earth ?” If you're interested in knowing that your work helps people smile, keep reading… We're looking for highly skilled Electricians who have experience maintaining and repairing equipment like that found at Disneyland and Disney California Adventure, kitchen & restaurants. If this sounds like a challenge you're ready to undertake, apply today to join the team! Basic Qualifications : To be successful in this role, you will need: Ability to perform maintenance on food preparation and holding appliances/equipment. Understanding of and ability to operate under Hazard Analysis Critical Control Point (HACCP) guidelines and other food safety/sanitary guidelines. Must also be able to troubleshoot and repair gas and steam systems applied in commercial kitchen equipment. Technical competence, the ability to read and understand detailed instructions, blueprints, flowcharts, schematics and engineering documents, and pass all compliance for technical and safety training Knowledge in the control and repair of circuits and motors Keen troubleshooting skills and comfortable working alone or in a team. Ability to evaluate the scope of a job, resolve needed parts/materials, and order through authorized vendors Expertise using common hand tools, meters, gauges and other associated test and measurement equipment, as well as ability to measure current, voltage and amperage Proficiency in the basic math skills needed to do the job, differentiate colors, digital literacy, and full understanding of the National Electric Code Stamina and the physical ability to undertake the job. You might bicycle, bend, kneel, climb, push vehicles to re-position them for repair, work with arms/hands above shoulder level for an extended period of time, climb (sometimes as high as 200 ft.) and more, all on a regular basis At least 18 years of age You will be required to use 2-way radios, learn CMMS (MAXIMO work order system), attend/pass compliance and other training sessions to ensure accurate maintenance documentation Electricians may work outdoors in all weather conditions, in an industrial workshop, in kitchens with wet/slippery surfaces, and may have occasional exposure to high temperatures, noise levels, and fumes In addition to the physical tasks listed above, Electronic Technicians may need to push/pull and/or lift up to 10 lbs. constantly, up to 25 lbs. frequently, up to 75 lbs. occasionally and rarely up to/over 100 lbs. Schedule Availability - Must be open to any shift (1st, 2nd, and 3rd shift) including weekends, holidays, with any combination of days off. Additional Information : Those assigned to the Electrician position are required to attend an annual Hearing Conservation training class and Lead Awareness class. They are also required to submit to an annual audiometric exam and a semi-annual Lead/Zinc blood test. SCHEDULE AVAILABILITY Shifts are typically at night, and individuals must have availability to work Sunday through Saturday, any shift (1st, 2nd, and 3rd shift) including holidays, and must be open to any days off. SUBMITTING YOUR APPLICATION After clicking “Apply Now” below, the employment application will open in a new window. Please complete ALL pages of the application by clicking “Next” on each page, then “Submit” on the final page. KEYWORD: DLR Casting, dlrcasting, Disneyland Resort Casting Hourly Jobs , DLRResortRoles, DLR Resort Roles, Facilities, HeroesWorkHere, electrician, electronic technicians, blueprints, flowcharts, schematics, engineering documents, circuits, current, voltage, amperage, Hazard Analysis Critical Control Point, HACCP, National Electric Code, CMMS, MAXIMO The pay rate for this role in California is $40.02 to $48.73 per hour, which follows the pay scale agreed upon in the Collective Bargaining Agreement. The base pay actually offered may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience, among other factors. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit: ****************************************

Do you love working with your hands? Are you interested in construction and in becoming an electrician? Then the electrical apprentice position could be perfect for you! Electrical apprentices are able to earn a paycheck while learning the trade through firsthand experience. This position has a clear career path to becoming an electrician with the potential and opportunity to become a manager of a team and larger scope of work. Position Responsibilities The electrical apprentice is partnered with a licensed journeyman electrician and has on-the-job training (OJT) to become an electrician. You'll help perform electrical installations of a multifamily and commercial nature. Learn and perform all scopes of large-scale projects, from distribution to rough in, trim and deck work. Participate in official apprenticeship program and attend classes as required. Here's What We're Looking For Motivated individuals who want to learn the electrical trade and have a high school diploma or GED as well as reliable transportation. Successfully register, enroll and participate in an electrical apprenticeship program (and remain in good standing) until program is completed. Able to physically perform the essential functions of the job. Willing to learn electrical codes and other construction safety requirements. Demonstrate and uphold Power Design's core values, which include integrity, accountability, teamwork, innovation, and growth Benefits and Perks Competitive salaries offered Exciting, award-winning workplace culture focused on employee appreciation, recognition, and fun Comprehensive medical, dental, vision, and life insurance offered Short and long-term disability plans 401k with company matching and Flexible Spending Accounts (FSA) options available Paid time off and company holidays provided Discounts to a variety of services, mental and physical wellness resources, free Care.com memberships, and other perks given to all Power Design team members Diversity and Inclusion At Power Design, we are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy, national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information, military and veteran status, and any other characteristic protected by applicable law. Power Design believes that diversity and inclusion among our teammates is paramount to our success as a national company, and we seek to recruit, develop, and retain the most talented people from a diverse candidate pool nationwide. About Us Power Design is a National Design Build Contractor, focused on innovative construction across multiple trades: electrical, mechanical, plumbing, and systems technologies. Since 1989, we've disrupted the industry by putting next-generation ideas to powerful, practical use because we care. We design breakthrough solutions that push the limits of what's possible by harnessing the collaborative power of our teams to elevate experiences and empower the communities where we live and work. In an industry that tends to look back, we're building better by staying grounded in our values, dedicated to our unique culture, and supportive of work-life balance - making us built to last. By investing in our people and doing things differently, we're designing what's next. To learn more, visit ********************** At Power Design, we are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy, national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information, military and veteran status, and any other characteristic protected by applicable law. Power Design believes that diversity and inclusion among our teammates is paramount to our success as a national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool nationwide. Individual compensation is determined by skills, qualifications, experience, and location. We offer a comprehensive benefits package, including health, dental, and vision insurance, 401(k) matching, generous paid time off, including holidays, and more.

Picture yourself spending your days in Disneyland, knowing you help keep attractions like _Space Mountain_ and The _Matterhorn_ up and running. Wouldn't it be cool to put your skills to work on the rides, restaurants and facilities of the " **_Happiest Place on Earth_** ?" If you're interested in knowing that your work helps people smile, keep reading... We're looking for highly skilled Electricians who have experience maintaining and repairing equipment like that found at **Disneyland** and **Disney California Adventure, kitchen & restaurants** . If this sounds like a challenge you're ready to undertake, apply today to join the team! **Responsibilities :** **Every day as an Appliance Electrician is different** . On any given day or night, you might: + Troubleshoot equipment problems at one of the many restaurants to keep the food flowing. + Be responsible for performing preventive maintenance, repairing electrical systems/assemblies, lamping, installation of receptacles, switches, bending conduit, and resetting breakers. **Basic Qualifications :** **To be successful in this role, you will need:** + Ability to perform maintenance on food preparation and holding appliances/equipment. Understanding of and ability to operate under Hazard Analysis Critical Control Point (HACCP) guidelines and other food safety/sanitary guidelines. Must also be able to troubleshoot and repair gas and steam systems applied in commercial kitchen equipment. + Technical competence, the ability to read and understand detailed instructions, blueprints, flowcharts, schematics and engineering documents, and pass all compliance for technical and safety training + Knowledge in the control and repair of circuits and motors + Keen troubleshooting skills and comfortable working alone or in a team. + Ability to evaluate the scope of a job, resolve needed parts/materials, and order through authorized vendors + Expertise using common hand tools, meters, gauges and other associated test and measurement equipment, as well as ability to measure current, voltage and amperage + Proficiency in the basic math skills needed to do the job, differentiate colors, digital literacy, and full understanding of the National Electric Code + Stamina and the physical ability to undertake the job. You might bicycle, bend, kneel, climb, push vehicles to re-position them for repair, work with arms/hands above shoulder level for an extended period of time, climb (sometimes as high as 200 ft.) and more, all on a regular basis + At least 18 years of age You will be required to use 2-way radios, learn CMMS (MAXIMO work order system), attend/pass compliance and other training sessions to ensure accurate maintenance documentation Electricians may work outdoors in all weather conditions, in an industrial workshop, in kitchens with wet/slippery surfaces, and may have occasional exposure to high temperatures, noise levels, and fumes In addition to the physical tasks listed above, Electronic Technicians may need to push/pull and/or lift up to 10 lbs. constantly, up to 25 lbs. frequently, up to 75 lbs. occasionally and rarely up to/over 100 lbs. Schedule Availability - Must be open to any shift (1st, 2nd, and 3rd shift) including weekends, holidays, with any combination of days off. **Preferred Qualifications:** + 2 or more years of experience + Ideal backgrounds include trade school, apprenticeship and related experience **Additional Information :** Those assigned to the Electrician position are required to attend an annual Hearing Conservation training class and Lead Awareness class. They are also required to submit to an annual audiometric exam and a semi-annual Lead/Zinc blood test. **SCHEDULE AVAILABILITY** Shifts are typically at night, and individuals must have availability to work Sunday through Saturday, any shift (1st, 2nd, and 3rd shift) including holidays, and must be open to any days off. **SUBMITTING YOUR APPLICATION** After clicking " **Apply Now** " below, the employment application will open in a new window. Please complete ALL pages of the application by clicking " **Next** " on each page, then " **Submit** " on the final page. KEYWORD: DLR Casting, dlrcasting, Disneyland Resort Casting Hourly Jobs , DLRResortRoles, DLR Resort Roles, Facilities, HeroesWorkHere, electrician, electronic technicians, blueprints, flowcharts, schematics, engineering documents, circuits, current, voltage, amperage, Hazard Analysis Critical Control Point, HACCP, National Electric Code, CMMS, MAXIMO **The pay rate for this role in California is $40.02 to $48.73 per hour, which follows the pay scale agreed upon in the Collective Bargaining Agreement.** **The base pay actually offered may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience, among other factors. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit:** ******************************************* **.** **Job ID:** 1316863BR **Location:** Anaheim,California **Job Posting Company:** "Disneyland Resort" The Walt Disney Company and its Affiliated Companies are Equal Employment Opportunity employers and welcome all job seekers including individuals with disabilities and veterans with disabilities. If you have a disability and believe you need a reasonable accommodation in order to search for a job opening or apply for a position, email Candidate.Accommodations@Disney.com with your request. This email address is not for general employment inquiries or correspondence. We will only respond to those requests that are related to the accessibility of the online application system due to a disability.

An Electrical Apprentice supports licensed electricians in the installation, maintenance, and repair of electrical systems in residential, commercial, and industrial settings. This is an entry-level position that offers hands-on training and experience while working toward journeyman electrician status. The role involves learning and performing electrical work under direct supervision in compliance with safety codes and regulations. Key Responsibilities: Assist electricians with the installation of wiring systems, lighting, circuit breakers, and electrical panels. Measure, cut, and bend wire and conduit using hand tools and power tools. Read and interpret blueprints, schematics, and technical diagrams. Perform basic maintenance on electrical systems and components. Help maintain a clean and organized job site. Adhere to all safety protocols and electrical codes. Support in troubleshooting and diagnosing electrical issues. Learn and apply the National Electrical Code (NEC) and local regulations. Transport tools, materials, and equipment to and from job sites. Requirements: High school diploma or GED equivalent (required). Enrollment in or completion of an electrical apprenticeship program (preferred). Basic understanding of electrical systems and tools. Strong desire to learn and grow in the electrical trade. Good hand-eye coordination and physical fitness to perform manual labor. Ability to follow instructions and work effectively in a team. Must be reliable, punctual, and have a strong work ethic. Valid drivers license and reliable transportation to job sites (may be required). Work Environment: Indoor and outdoor job sites in residential, commercial, and industrial environments. May require working in confined spaces, at heights, or during varying weather conditions. Working Place: Los Angeles, California, United States Company : 2025 Oct 16th Virtual Fair - Powerfull Electric

Client: L-3 Harris Job Title: Electrical Engineering Duration: 12 Months (possible extn. Or hire) Pay rate: $65/hour on (W2) Essential Functions: Responsible for designing, developing, modifying, testing, evaluating and integrating electronic equipment, electronic parts, components, or integrated circuitry for complex, high performance hardware systems. Determines design approaches and parameters. Analyzes electrical requirements to determine feasibility of design within time and cost constraints. Analyzes equipment to establish operating data, conducts experimental tests and evaluates results. Selects components and equipment based on analysis of specifications and reliability. Able to identify component operational characteristics that may impact system performance and or sustainability. Supports and/or leads various design activities for new/existing products, predominantly involving medium frequencies/edge rates. Design for manufacturing is considered through all phases of the development process. Applies moderately complex electrical engineering principles and techniques to support/lead design, development, documentation, verification, and manufacturing debug activities. Supports and/or leads design modifications for existing products frequently driven by component obsolescence situations. The design modification is usually of moderate complexity and may require major card level redesign to absorb the necessary hardware changes. Provides technical solutions to a wide range of difficult problems. Contributes to completion of milestones associated with specific projects that have significant effect on the success of a sub-process/small project task. Ability to understand and generate schematics with digital and analog electronic circuits. Ability to provide guidance for PCB layout. May also review vendor capability to support development. Includes the application of specialized skill sets including analog, CCA, power, antenna, and control systems knowledge as required. May develop, design, and assess the methodologies and performance of specialized algorithms for, Underwater Acoustics, sonar, communications, geophysical, and other sensor processing applications. Generation of Presentation materials and training Operation's Manual development and release Test Procedure development and release Qualifications: Bachelor's Degree and minimum 4 years of prior relevant experience. Graduate Degree and a minimum of 2 years of prior related experience. In lieu of a degree, a minimum of 8 years of prior related experience. Minimum 3 years of experience in Analog Circuit Design. Minimum 3 years of RF Electronics. Minimum 2 years of Schematics Capturing & PCBA Layout in either Altium or Cadence. Minimum 3 years Lab experience in trouble shooting electronics in Analog and RF domain. Minimum 2 years of experience working with Network Analyzer, Frequency Generator, Vector Analyzer, and digital/analog scope. Preferred Additional Skills: Familiarity with GPS Electronics / Circuit Design. A/D and D/A Circuit Design, Interfacing and use experience Familiarity with industry standard EDA tools including schematic capture, PCB layout and Experience in development of military products, a plus.

Details: Purpose and Scope: The Electrician is responsible for building, testing and maintaining AC and DC power systems. They troubleshoot power plant, transformer and generator systems, diagnose customer alarms, remove and install various battery systems and utilize preventative maintenance skills. Details: Responsibilities: Ensures all required paperwork is submitted to complete jobs daily. Ensures safe transportation of personnel and material to and from remote job sites daily. Ensures all Federal, State and local laws are followed at all times. Ensures compliance with both company and customer policies at all times. Installs, troubleshoots and removes battery power systems, batteries, A panels, transformers, generators, alarms and various interconnect/transport equipment. Performs preventative maintenance, as required. All other duties as required. Skills / Other: Basic time management and organizational skills required. Computer Networking experience. Schedule flexibility Able to travel (locally). Experience: Minimum 7-10 year of experience, strongly preferred. Pay: $30 - $40/hr #MCTA1

Job Title: Maintenance Electrician Duration: Contract 4 Months, Possible to Direct Shift: 6:00 A.M. - 2:30 P.M. Responsibilities: Under general direction, is responsible for repairing, maintaining and installing all types of electrical systems for production equipment, support equipment, and facilities. Ensures work performed is in compliance with National Electrical Code and OSHA regulations. Reviews work orders and determines electrical modifications per specifications. Inspects new parts to determine if it meets work order specifications Ensures any wiring of new and rebuilt equipment complies with National Electrical Code and OSHA regulations. Performs preventative maintenance and maintains a clean and safe work area. Performs other related duties as assigned or requested First shift, but flexibility is preferred. On call one week per month for emergency maintenance. Qualifications *High school diploma, general education degree (GED) or equivalent *Vocational/Specialized training or Certification in Electrical System Repair and maintenance. *2 years related experience; mechanical and electrical industrial maintenance experience in industrial environment highly preferred *PLC knowledge would be a plus Additional Information All your information will be kept confidential according to EEO guidelines.

Since 1996, Boudreau Pipeline Corporation continues to be Southern California's premier pipeline company that provides quality solutions and installations for wet utilities including sewer, water, storm drain systems and fire lines. We specialize in both conventional and highly complex pipeline projects for leading commercial, industrial, and residential builders, municipalities, utilities and contractors. As a proud partner with the Laborers' Union, we continue to provide the best support to our team of employees, their families, and our community. Surveyed as a Top Workplace for the 8th year in a row by our Employees, we continue to provide superior on-the-job training, career advancement, safety and a dynamic company culture while practicing our Guiding Principles; Mutual Respect, Accountability and Responsibility. Come join our family, We Dig Your Future!™ We are looking for an Electrician Laborer to join our expanding team! The Mobile Home Park (MHP) Electrician Laborer is responsible for assisting in installing, repairing, maintaining and testing electrical systems while maintaining compliance with nationals, state and local electrical codes and company policies and procedures. Responsibilities Installation of electrical wiring, equipment, or fixtures, based on job specifications and local codes. Ensures a safe work environment in compliance with all safety policies and procedures using the appropriate tools and equipment for the task. Properly follows all company policies and OSHA/MSHA regulations for safe working procedures and environment. Reports any problems to the Foreman, Superintendent, Safety Manager, or Human Resources Manager. Signals operators of construction equipment to facilitate alignment, movement, and materials. Follows direction of Foreman for daily tasks and expectations for each specific project or jobsite May be called upon to run small power tools such as jack hammer, drills, grinders, etc. Digs, spreads, and levels construction materials, tools and supplies. Lifts, carries and holds material, tools and supplies. Maintains regular and predictable attendance at assigned times is required. Connect wires to circuit breakers, transformers, or other components (not energized). Test electrical systems or continuity of circuits in electrical wiring, equipment, or fixtures, using testing devices, such as ohmmeters, voltmeters, to ensure compatibility and safety of system Use a variety of tools or equipment, such as power construction equipment, measuring devices, power tools, and testing equipment, such as ammeters, or test lamps. Work from ladders, scaffolds, or roofs to install, maintain, or repair electrical wiring, equipment, or fixtures. Place conduit, pipes, or tubing, inside designated partitions, walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes. Fasten small metal or plastic boxes to walls to house electrical switches or outlets. Construct or fabricate parts, using hand tools, according to specifications. Perform physically demanding tasks, such as digging trenches to lay conduit or moving or lifting heavy objects. Other duties as assigned. SAFETY Responsible for ensuring OSHA standards and company safety policies are always complied with including but not limited to operation of tools, equipment and machinery. Corrects unsafe conditions in work area and report any conditions that are not correctable to supervisor immediately. Qualifications Current State of California Electrician Trainee certification required. A minimum of two to five years of experience working as an electrician on residential, commercial and/or industrial projects. Basic understanding of residential electrical codes and installation methods Ability to verify compliance and functionality of installations. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals; ability to listen and comprehend instructions accurately to learn products, processes, safety procedures, installation techniques and equipment use. Ability to add, subtract, multiply and divide all units of measure, including whole numbers, common fractions, and decimals. Pay range: $24.00 - $30.00/hr depending on experience

SolarShoppers AV's #1 Rated Solar Company is seeking a Licensed C-10 Electrical Contractor to be a full time employee.Hiring immediately as an employee with a competitive salary that is negotiable based on experience.Please apply here or call Shawn at ************ if you are licensed contractor seeking employment. Compensation: $70,000.00 - $80,000.00 per year

Please visit our website and apply at: Barkermgt.com Please visit our website and apply at: Barkermgt.com Please visit our website and apply at: Barkermgt.com Barker Management Inc. is a leader in the Property Management Services industry who has provided quality service to customers since 1972! We consider the employees of Barker to be one of our most valuable resources. Our continued success depends on service-oriented employees making a difference for Barker and our customers every day. The loyalty, commitment, and dedication of Barker people have provided the winning edge in the competitive market we serve. Our customers trust Barker and the services we provide. You must have experience with Turnovers / plumbing / drywall / painting / Hand Tools! Hours: 8:00 am to 5:00 pm, Monday through Friday. Employment Includes: Free medical, dental and vision after your first 90 days! 80 hours of paid vacation, 12 paid holiday's and 80 hours of sick pay as well! Property size: 66 units Employee is responsible for MAINTENANCE AND JANITORIAL TASKS. Type of Housing / Property: Tax Credit / Additional Fund Sources * We are an equal-opportunity employer that pledges not to discriminate on the basis of race, color, age, sex, religion, national origin, etc., in hiring or promoting.

We are seeking a skilled and safety-conscious Manufacturing-Industrial Electrician to join our operations team. This role is responsible for installing, maintaining, troubleshooting, and repairing electrical systems and equipment in a manufacturing or industrial setting. The ideal candidate will have a strong understanding of industrial electrical systems, PLCs, and safety protocols. Key Responsibilities: Install, maintain, and repair electrical systems, wiring, control systems, and equipment in accordance with local and national electrical codes. Troubleshoot and diagnose electrical issues using appropriate testing devices and schematics. Perform preventive maintenance on electrical systems and machinery to minimize downtime. Read and interpret blueprints, technical drawings, and electrical schematics. Work with Programmable Logic Controllers (PLCs), Variable Frequency Drives (VFDs), and other automation systems. Ensure compliance with OSHA, NFPA 70E, and other safety standards. Collaborate with engineers, maintenance staff, and production teams to support operational goals. Maintain accurate records of work performed, parts used, and time spent on tasks. Required Qualifications: Education: High school diploma or GED required. Associate degree or technical diploma in Electrical Technology, Industrial Maintenance, or a related field preferred. Certifications: Valid State Electrician License (Journeyman or Master, depending on state requirements). OSHA 10 or 30 Certification preferred. NFPA 70E Certification is a plus. Certification in PLC programming or industrial automation is advantageous. Preferred. Experience: • Minimum 10 years of experience as an industrial or manufacturing electrician. • Experience with 480V systems, motor controls, and industrial automation. Skills and Competencies: • Strong knowledge of electrical theory and industrial electrical systems. • Proficiency in using electrical testing tools and diagnostic equipment. • Ability to read and interpret technical documents and blueprints. • Excellent problem-solving and critical-thinking skills. • Strong attention to detail and commitment to safety. • Ability to work independently and as part of a team. The salary range for this position is $45-$55 per hour. Factors such as scope and responsibilities of the position, candidate's work experience, education/training, job-related skills, internal peer equity, as well as market and business considerations may influence base pay offered. This salary will be subject to a geographic adjustment (according to a specific city and state), if an authorization is granted to work outside of the location listed in this posting. Mitsubishi Chemical Group (MCGC) and any of our subsidiaries do not accept unsolicited resumes from individual recruiters or third-party agencies. No fee will be paid to third parties who submit unsolicited candidates directly to our hiring managers or HR team. No placement fees will be paid to any firm unless specifically invited on the search by the MCGC Talent Acquisition team and such candidate was submitted to the MCGC Talent Acquisition Team via our Applicant Tracking System. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status Mitsubishi Chemical Carbon Fiber and Composites, Inc. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please email [email protected]. We will make a determination on your request for reasonable accommodation on a case-by-case basis. The law requires Mitsubishi Chemical Carbon Fiber and Composites, Inc. to post a notice describing the Federal laws prohibiting job discrimination. For information regarding your legal rights and protections, please click on the following link: Know Your Rights Mitsubishi Chemical Carbon Fiber and Composites, Inc. will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay. Please see the Pay Transparency Nondiscrimination Provision for more information As a Federal Contractor, Mitsubishi Chemical Carbon Fiber and Composites, Inc. is required to participate in the E-Verify Program to confirm eligibility to work in the United States. For information please click on the following link: E-Verify.

Function as an Apprentice Electrician, under a certified or licensed Electrician for Bergelectric Corp. assist electricians with installing new electrical systems and repairing existing electrical systems while maintaining compliance with national, state, and local electrical codes along with all Bergelectric Corp. policies and procedures. Support activities at commercial, industrial, institutional and residential project locations. This is considered to be a safety sensitive position. Responsibilities Assist with the installation, repair, maintenance and testing of commercial, industrial and residential electrical systems in full support of Bergelectric Corp. safety, operations and productivity initiatives. Use industry related hand tools and power tools, under supervision. Assist the Electrician with measuring, cutting, bending, threading and installing wire and electrical cable systems, conduit systems and other wire raceway systems. Assist the Electrician with wires and cables within control centers, distribution boxes, transformers, transducers, switch gear, receptacles, switches, etc. Work with an Electrician to splice and terminate wires at junction points. Clean, gather and transport materials to electricians on the construction site. Communicate effectively with Foremen and crew members. Maintain workflow schedule to ensure all Bergelectric Corp. productivity objectives are met. Demonstrate the highest level of professionalism and courtesy when interacting with colleagues, customers and vendors. Adhere to all Bergelectric Corp.'s safety policies and procedures. Qualifications Must be currently enrolled or working on enrollment in an approved Apprentice program. Knowledge of electrical theory, basic circuits, branch circuits, and specialty systems. Knowledge of magnetic induction, three-phase transformers, conductors and wiring methods. The ability to read and understand electrical single line blueprints. Familiar with aspects of operation, maintenance and repair of electrical systems. Basic knowledge of tools and equipment and how to safely use them. Physical Demands Lift 50 lbs. from the ground and pull 50 lbs. of force. Perform ladder climbing, wire pulling and conduit pulling. Fully squat, stoop or kneel while wearing a 25 lbs. tool belt. Maintain a standing position for long periods of time while performing repetitive actions such as grasping or manipulating wires. Work off of ladders, man lifts or reach booms. Working Environment A variety of weather conditions including cold, snow, rain, heat, etc. High noise levels Salary Range USD $22.00 - USD $40.00 /Hr. Benefits Bergelectric is proud to offer a comprehensive benefits package, including medical, dental, vision, and a 401k retirement plan with employer matching. EEO Statement The information contained in the job description is for compliance with the Americans with Disabilities Act (ADA) and is not an exhaustive list of duties performed by this position. Additional duties are performed by the individuals currently holding this position and additional duties may be assigned by the Supervisor or their designee. Bergelectric is a Federal government contractor and subject to the requirements of the Office of Federal Contract Compliance Programs (OFCCP). We have listed the affirmative action laws that we are governed by and their implementing regulations for your easy reference: Executive Order 11246 including Pay Transparency Nondiscrimination Provision (41 C.F.R. part 60) The Vietnam Era Veterans Readjustment Assistant Act of 1974, as amended (41 C.F.R. 60-300) Section 503 of the Rehabilitation Act of 1973, as amended (41 C.F.R. 60-741)

As we spark a future filled with excellence, we're searching for Electricians to become pivotal players in our mission to deliver top-tier work! This role works under the supervision of the Electrical Foreman to ensure we provide quality electrical installations on each of our projects. With a clear path to the role of Foreman or Manager overseeing our dynamic builds, the sky is the limit for a career here! So, if you're ready to light up skylines as part of our passionate and experienced team, learn more below and apply today. position responsibilities... Perform electrical installations on multifamily and commercial projects Learn and perform all scopes for large-scale electrical projects including distribution, rough, trim, and deck work Provide input and coordinate with other trades on each project Maintain safety and quality standards on all installations and tasks Ensure code compliance by inspecting and testing electrical systems, equipment, and components to identify hazards or needed repairs what we're looking for... OSHA 30 certification preferred An active Journeymen or Master Electrician License Three or more years' experience as an Electrician Proficient knowledge of the National Electrical Code (NEC), local codes, and construction safety requirements Motivated individual with a strong work ethic Demonstrate and uphold Power Design's core values, which include integrity, accountability, teamwork, innovation, and growth benefits and perks... Hourly pay range: $35-$45/hr Exciting, award-winning workplace culture focused on employee appreciation, recognition, and fun Comprehensive medical, dental, vision, and life insurance offered Short and long-term disability plans 401k with company matching and Flexible Spending Account (FSA) options available Paid time off and company holidays provided Discounts to a variety of services, mental and physical wellness resources, free Care.com membership, and other perks given to all Power Design team members At Power Design, we are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy, national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information, military and veteran status, and any other characteristic protected by applicable law. Power Design believes that diversity and inclusion among our teammates is paramount to our success as a national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool nationwide. Individual compensation is determined by skills, qualifications, experience, and location. We offer a comprehensive benefits package, including health, dental, and vision insurance, 401(k) matching, generous paid time off, including holidays, and more.

Purpose and Scope: The Electrician is responsible for building, testing and maintaining AC and DC power systems. They troubleshoot power plant, transformer and generator systems, diagnose customer alarms, remove and install various battery systems and utilize preventative maintenance skills. Responsibilities: Ensures all required paperwork is submitted to complete jobs daily. Ensures safe transportation of personnel and material to and from remote job sites daily. Ensures all Federal, State and local laws are followed at all times. Ensures compliance with both company and customer policies at all times. Installs, troubleshoots and removes battery power systems, batteries, A panels, transformers, generators, alarms and various interconnect/transport equipment. Performs preventative maintenance, as required. All other duties as required. Skills / Other: Basic time management and organizational skills required. Computer Networking experience. Schedule flexibility Able to travel (locally). Experience: Minimum 7-10 year of experience, strongly preferred. Pay: $30 - $40/hr #MCTA1

Since 1996, Boudreau Pipeline Corporation continues to be Southern California's premier pipeline company that provides quality solutions and installations for wet utilities including sewer, water, storm drain systems and fire lines. We specialize in both conventional and highly complex pipeline projects for leading commercial, industrial, and residential builders, municipalities, utilities and contractors. As a proud partner with the Laborers' Union, we continue to provide the best support to our team of employees, their families, and our community. Surveyed as a Top Workplace for the 8th year in a row by our Employees, we continue to provide superior on-the-job training, career advancement, safety and a dynamic company culture while practicing our Guiding Principles; Mutual Respect, Accountability and Responsibility. Come join our family, We Dig Your Future! We are looking for an Electrician Laborer to join our expanding team! The Mobile Home Park (MHP) Electrician Laborer is responsible for assisting in installing, repairing, maintaining and testing electrical systems while maintaining compliance with nationals, state and local electrical codes and company policies and procedures. Responsibilities * Installation of electrical wiring, equipment, or fixtures, based on job specifications and local codes. * Ensures a safe work environment in compliance with all safety policies and procedures using the appropriate tools and equipment for the task. * Properly follows all company policies and OSHA/MSHA regulations for safe working procedures and environment. * Reports any problems to the Foreman, Superintendent, Safety Manager, or Human Resources Manager. * Signals operators of construction equipment to facilitate alignment, movement, and materials. * Follows direction of Foreman for daily tasks and expectations for each specific project or jobsite * May be called upon to run small power tools such as jack hammer, drills, grinders, etc. * Digs, spreads, and levels construction materials, tools and supplies. * Lifts, carries and holds material, tools and supplies. * Maintains regular and predictable attendance at assigned times is required. * Connect wires to circuit breakers, transformers, or other components (not energized). * Test electrical systems or continuity of circuits in electrical wiring, equipment, or fixtures, using testing devices, such as ohmmeters, voltmeters, to ensure compatibility and safety of system * Use a variety of tools or equipment, such as power construction equipment, measuring devices, power tools, and testing equipment, such as ammeters, or test lamps. * Work from ladders, scaffolds, or roofs to install, maintain, or repair electrical wiring, equipment, or fixtures. * Place conduit, pipes, or tubing, inside designated partitions, walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes. * Fasten small metal or plastic boxes to walls to house electrical switches or outlets. * Construct or fabricate parts, using hand tools, according to specifications. * Perform physically demanding tasks, such as digging trenches to lay conduit or moving or lifting heavy objects. * Other duties as assigned. SAFETY * Responsible for ensuring OSHA standards and company safety policies are always complied with including but not limited to operation of tools, equipment and machinery. * Corrects unsafe conditions in work area and report any conditions that are not correctable to supervisor immediately. Qualifications * Current State of California Electrician Trainee certification required. * A minimum of two to five years of experience working as an electrician on residential, commercial and/or industrial projects. * Basic understanding of residential electrical codes and installation methods * Ability to verify compliance and functionality of installations. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals; ability to listen and comprehend instructions accurately to learn products, processes, safety procedures, installation techniques and equipment use. * Ability to add, subtract, multiply and divide all units of measure, including whole numbers, common fractions, and decimals. Pay range: $24.00 - $30.00/hr depending on experience

SolarShoppers AV's #1 Rated Solar Company is seeking a Licensed C-10 Electrical Contractor.Hiring immediately as an employee with a competitive salary that is negotiable based on experience.Please apply here if you are licensed contractor seeking employment. Compensation: $68,640.00 per year