Architectural designer jobs in Clarksville, TN - 221 jobs

Purpose and Objectives The primary goal of this thesis is to investigate the feasibility and advantages of Gallium Nitride (GaN) technology as a key component in inverter modules, compared to existing solutions such as Silicon Carbide (SiC) MOSFETs and Insulated Gate Bipolar Transistors (IGBTs). The work will be divided into three main phases: Phase 1: Technology Analysis and Benchmarking Objective: Conduct an in-depth study of GaN technology for inverter applications. Activities: * Review state-of-the-art literature and technical papers to understand current trends and advancements in GaN-based power electronics. * Benchmark GaN against alternative technologies (SiC, IGBT) in terms of: Switching speed Efficiency Thermal performance Reliability and cost implications * Analyze what major OEMs and semiconductor companies are currently implementing in this domain. * Collaborate with NXP's Application and Product Definition Team to gather expert insights and feedback on GaN adoption strategies. Expected Outcome: A comprehensive report summarizing the advantages, limitations, and market positioning of GaN technology for inverter modules. Phase 2: Gate Driver Architecture Design for GaN Objective: Develop and validate a gate driver architecture optimized for GaN devices. Activities: * Focus on GaN requirements: High-speed switching Low parasitic inductance Robust protection mechanisms * Perform analog design activities, including: Architecture definition and evaluation Behavioral modeling and simulation PVT (Process, Voltage, Temperature) analysis * Address industrialization aspects, ensuring the design meets manufacturability and reliability standards. * Supervise and support layout design activities, considering: Parasitic effects Signal integrity Impact of layout on performance Expected Outcome: A fully simulated and optimized gate driver architecture for GaN, ready for prototyping. Phase 3: Bench Characterization and Validation Objective: Validate the performance of a previous-generation GaN gate driver in NXP's laboratory environment. Activities: * Perform hands-on bench testing and waveform analysis. * Identify critical issues and limitations in the existing design. * Document findings in a detailed characterization report, including: Measured performance vs. simulated expectations Recommendations for improvement Expected Outcome: A complete validation report highlighting gaps and providing actionable insights for next-generation designs. Key Deliverables Literature review and benchmarking report on GaN vs. SiC/IGBT technologies. Gate driver architecture design documentation, including simulations and layout considerations. Bench characterization report of previous-generation gate driver. Required Skills * Analog circuit design and simulation (SPICE-based tools) * Layout design (Cadence Virtuoso or equivalent) * Power electronics fundamentals * Laboratory measurement techniques (oscilloscopes, power analyzers) * Collaboration with cross-functional teams (Application Engineering, Product Definition) More information about NXP in Italy... #LI-7795

Are you ready to join a fast-paced, innovative team making a real impact in the renewable energy industry? Join Shoals Technologies Group (NASDAQ: SHLS), a leading provider of electrical balance of systems (EBOS) solutions for solar and energy storage. Headquartered just north of Nashville, Tennessee, we have been driving industry innovation since 1996 by delivering cutting-edge technologies that improve efficiency, safety, and reliability for solar systems worldwide. With over 60 GW of solar systems deployed globally, we're setting the standard for the renewable energy industry. We are a collection of engineers, renewable advocates, curious minds, and collaborators. Our manufacturing facilities in Tennessee and Alabama, along with sales teams across Spain and Australia, enable us to power clean energy solutions across Europe, Latin America, Africa, and Asia-Pacific. We push boundaries and challenge each other to design, develop, and deliver solutions with the potential to change the world. We are the rebellious hero. Summary: Shoals Technologies, a global renewable energy organization, is hiring a CAD Designer. This role will report to the Senior Manager of Integration and has responsibility for the generation of all 2D CAD files that represent the products, systems, subsystems or components under development. The CAD Designer will be responsible for the fit-up of products, systems and subsystems at the assembly level, as well as, developing and maintaining all engineering documentation relating to the bills of material. In a cross-functional team environment, they will collaborate with other CAD designers, product design engineers, technicians, project managers, product managers, manufacturing engineers, and external resources to manage concurrent responsibilities for multiple in-process projects. Responsibilities: * Work independently and self-manage time to meet deadlines * Work efficiently with a high degree of organization and accuracy * Follow all established department processes, formatting and design standards * Develop a working knowledge of basic PV Systems and major components * Establish and maintain knowledge of direct use components and processes * Review and compare customer drawings to Sales PO's * Report any discrepancies between final drawings and Sales Orders * Read, understand and interpret complex Customer supplied drawings and detail prints * Recognize potential design issues and collaborate with Supervisor for solutions * Manipulate geometry, manage formatting and layers in complex CAD drawings * Design layouts and custom products based on specific project's requirements * Create detailed customer facing drawing packages using AutoCAD 2D in Architectural format * Prepare and calculate detailed takeoffs for custom parts using Excel and CAD 2D * Perform self-reviews of created drawings and takeoffs * Take meticulous notes during design process to present to Supervisor upon review * Revise drawings and takeoffs as directed by customer or Supervisor * Provide feedback and suggestions regarding best practices to Supervisor for continuous improvement * Assist Team as needed to meet deadlines and create new efficiencies

We're looking for a Registered Architect, with a preference for LEED AP Certification, with knowledge of design, trends, construction methodology, material application, and manufacturer-supplier appropriateness. As the Architect you will work with or possibly lead groups of architects and designers to complete technical portions of projects within established budgets and schedules. The work will be performed in Oak Ridge, TN with potentially some business travel. Join us and love what you do. Focus on tackling the toughest challenges with a smile as you support the development of life changing infrastructure that improves communities across the United States. If you're up for the challenge, we've been looking for someone just like you. Join our team and help us lay the foundation for human progress. Amentum Nuclear Projects is a Tier 1 service provider to the U.S. Department of Energy, we deliver safe and innovative solutions at complex nuclear cleanup and production sites. Our services include program management, decommissioning, environmental remediation, waste and nuclear material management, nuclear operations, consulting, and engineering and construction. * Bachelor's degree in Architecture from an accredited Architectural program * Licensed Architect in Tennessee with current registration or licensed in another state with ability to obtain TN licensure * Experience designing commercial or industrial facilities * Demonstrate experience of delivering a range of projects from concept through detailed design completion. * Experience with International Building Code (IBC) * Producing specifications and reviewing work of other staff for technical accuracy and provide guidance * Strong knowledge of design, trends, construction methodology, material application, and manufacturer-supplier appropriateness * Ability to Follow established Amentum quality procedures and ensures that all work accomplished under their control is accomplished under established quality procedures * Experience working within a quality system based on ISO 9000 or NQA-1 * Competent using discipline specific software such as: Revit, AutoCAD, Microstation, etc… * Competent using Microsoft 365 software. * US citizen required. Preferred qualifications: * LEED AP certification * Able to lead groups of architects and designers to complete technical portions of projects within established budgets and schedules. * Experience with Department of Energy (DOE) standards and Nuclear Regulatory Commission (NRC) regulations * Master's degree is a plus * DOE Q clearance is preferred but not required * A person residing a commutable distance from our Oak Ridge, TN office * NCARB registration is preferred but not required * Experience facilitating Charrettes desired but not required * DOE experience is desirable but not required. * Project Management Experience * Visualization/Graphic Capabilities Essential Functions: Intermittent sitting, walking, standing, bending, squatting, climbing, kneeling, twisting, and lifting. Lifting requirements limited to 20 lbs. in the form of supplies, drawings, etc. Longest distance carried of 50 feet. Hand manipulation is required for simple grasping, pushing, and pulling, and fine manipulation. Right and/or left hands utilized. Occasional need to reach and/or work above the shoulder, for supplies, as well as below the shoulder for same. No foot controls necessary. Must be alert to equipment in the field, there will be occasional travel, will work near construction job site equipment when in the field, occasional need to work near hazardous equipment and machinery, occasional need to walk on uneven ground, exposure to dust, gas or fumes, exposure to noise, extremes in temperature or humidity, and potential work at heights. At Amentum, we help prepare people for new opportunities and challenges. With positions at every level, openings in multiple disciplines, expertise in a range of markets and offices around the globe, we create an environment where you can learn, grow, and thrive. From our competitive benefits program to our Health and Safety initiative of Beyond Zero workplace injuries, we believe that you'll find a flourishing career here at Amentum. Equipment and Machines: Standard office PC, with software will be provided Travel required - As needed Attendance: Ability to work in the office is required OTHER ESSENTIAL FUNCTIONS U.S. Citizenship required. Valid driver's license is required. Must be able to work in a team atmosphere. Must put forward a professional behavior that enhances productivity and promotes teamwork and cooperation. Grooming and dress must be appropriate for the position and must not impose a safety risk/hazard to the employee or others. Must take and pass a pre-employment drug and background check.

LANDSCAPE ARCHITECTURE INTERN Thomas & Hutton is a growing, well-established multi-discipline engineering firm providing consulting services throughout the southeast. We are an award-winning company that has been recognized as one of the best places to work in Georgia and South Carolina. Some of our many services include Land Planning; Landscape Architecture; Civil, Environmental, Structural and Marine Engineering; Land Surveying; Geographic Information Systems and Construction Administration. Thomas & Hutton is seeking enthusiastic and driven candidates for Summer Internships in our Landscape Architecture Department. Candidates must be in either their sophomore, junior, or senior year in pursuit of a landscape architecture degree. Previous internship experience as well as knowledge of AutoCAD, Adobe Creative Suite, and Sketch-up. Strong written and verbal communication skills are required. Thomas & Hutton's Interns will gain exposure to a wide range of projects by supporting the landscape architecture team on various tasks. Paid 40 hour per week internships begin in May 2026 and end in August 2026. Relocation and Housing are not provided. Please provide a portfolio with resume that accurately represents experience with the design process and visual presentation graphic capabilities is very important. Please note, sponsorship is not available for this position. Thomas & Hutton is a Drug-Free Workplace & E-Verify Participant Thomas & Hutton's Mission Statement, “Relationships and Solutions for Success” describes not only our unwavering commitment to clients but also our commitment to the success, both professionally and personally, of our employees. Thomas & Hutton was named to the Best Places to Work in South Carolina and Georgia by SCBIZ and Georgia Trend, and named One of the best Civil Engineering firms to work for by CE News/Zweig White. What makes Thomas & Hutton a great place to work? Opportunities for professional development, strong benefits and compensation packages, a commitment to make our communities better for future generations, a family-oriented culture, and our reputation as a firm with extremely knowledgeable professionals who serve as trusted advisors to our clients. Visit *********************** to learn more. We are an equal opportunity employer. Qualified minorities, women, veterans and individuals with disabilities are encouraged to apply. If you want to view the EEO is the Law poster, please choose your language: English - Spanish - Arabic - Chinese

Career Area: Landscape Architecture / Planning What We're Looking For: Unleash Your Passion for Landscape Architecture: Join the Revolution at Barge Design Solutions! Your Summer Awaits at Barge: Come, share your summer with passionate landscape architects at Barge, where you'll learn, grow, and contribute to real-world projects. Join us, and let's redefine the landscape architecture experience together! What We're Looking For: If you're a dynamic, hard-working student eager to make your mark in landscape architecture, we want YOU for our 2026 Summer Internship Program! We're offering an exclusive internship position in the city of Chattanooga, TN. Learning and Applying Skills: Immerse yourself in a dynamic team setting, where you'll contribute to collaborative designs, prepare conceptual and detailed drawings, and craft compelling graphic plans and images. Gain hands-on experience with industry-leading tools such as AutoCAD, SketchUp, Illustrator, Photoshop, Lumion, and LandFX. Diversity, Equity, and Inclusion: At Barge Design Solutions, we believe in fostering an inclusive and diverse environment. We celebrate individuality and actively seek perspectives from all backgrounds. Our commitment to diversity is woven into the fabric of our culture, ensuring that everyone feels valued and heard. Education & Experience Qualifications: * Pursuing an undergraduate or graduate degree in Landscape Architecture from an accredited university. * Current GPA of 3.0 or higher. * Minimum age requirement: 18 years. Additional Details: * Paid internship with full-time hours (40 per week). * Primarily in-person work with limited remote opportunities. Why join us? Barge Design Solutions, Inc., is an engineering and architecture firm with diverse in-house multidisciplinary practice areas. The employee-owned company is more than 400-people strong and serves clients nationwide from multiple U.S. locations. Barge is ranked No. 171 on Engineering News-Record (ENR)'s 2021 Top 500 Design Firms list, is No. 177 on Architectural Record's Top 300 Architecture Firms and is a certified Great Place To Work. Our primary purpose for being in business is ultimately to create a better life by unleashing the potential of our people, clients and communities. This purpose is supported by our company's core values because at the end of the day, Barge CARES: * Collaborate - Help and expect help. Teamwork is essential in what we do. * Authentic - Honesty, integrity and trust are at the heart of everything we do. We are who we say we are. * Responsible - We are accountable for our work, our attitude, and our actions. We make Barge better. * Excellence - We go all in and expect more of ourselves than others expect of us. * Service - We are humble. We use our gifts in service of others. We believe that if we are living out our purpose for being in business and integrating our values into everything we do, we will ultimately achieve our vision to be the firm best known for being selected when it matters most. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status or on the basis of disability. Equal Opportunity Employer/Veterans/Disabled

Type: Full-Time Compensation: $160K$180K base + excellent benefits + PTO Utilization Target: ~75% billable A leading consulting firm is hiring a Practice Delivery Principal to help scale their Data & Analytics practice in Nashville. This is a client-facing, high-impact leadership role focused on enterprise data strategy, consulting delivery, and pre-sales. The firm works with Fortune 500 clients in industries like healthcare, financial services, and logistics. This is a newly created role, not a backfill. The ideal candidate brings 810+ years of experience spanning data consulting, client leadership, and technical delivery. Must be capable of leading teams, guiding enterprise clients through ambiguity, and shaping strategic data solutions with a consultative mindset. Key Responsibilities: Act as a data strategy advisor to enterprise clients, aligning technical initiatives with business value. Lead delivery of complex data programs including data warehousing, ETL modernization, governance, and cloud migration. Serve as the lead point of contact and trusted advisor for clients, especially in pre-sales and solution architecture discussions. Coach and mentor internal consultants to elevate team performance and technical maturity. Drive utilization, delivery excellence, and client satisfaction across multiple active engagements. Top Skills Required: Strong consulting and business acumen ability to advise stakeholders and drive outcomes, not just deliver code. Leadership experience running client-facing technical teams. Hands-on background with data architecture, ETL pipelines, and cloud platforms. Experience with AWS and/or Azure (GCP is a bonus). Knowledge of tools like Snowflake, Databricks, Azure Data Factory, Python, APIs, SSIS, or other modern data stack tools. Comfortable navigating pre-sales, SOW creation, and delivery planning in enterprise environments. Ideal Candidate: Has worked in professional services or consulting firms. Brings a blend of technical credibility and client-facing polish. Can confidently own a room, steer conversations, and guide high-stakes decisions. Wants to help build something this is a growth-oriented role on a growing team. Nice to Have: Data governance or strategy frameworks. Experience in regulated industries like healthcare or financial services. Local to Nashville and open to regular in-office presence.

Arcosa Marine Products, Inc., is searching for a CAD Designer/Drafter that will be based in our Ashland City, TN plant. Arcosa's Inland Barge Group is comprised of Arcosa Marine Products, Inc., a leading manufacturer of barges used to transport cargo on U.S. inland waterways. Arcosa Marine Products manufactures dry cargo barges, including flat-deck and hopper barges, that are used to transport a variety of products including grain, coal, and aggregates. Arcosa Marine Products also manufactures tank barges that carry petroleum, fertilizer, ethanol, chemicals, and other liquid cargoes. It is the largest U.S. manufacturer of fiberglass hopper barge covers used primarily on grain barges. Additionally, Arcosa Marine Products provides a full line of deck hardware to the marine industry, including hatches, castings, and winches for towboats and dock facilities. Learn More About Employee Benefits What You'll Do: * Primarily detail piping system designs for tank (liquid cargo) barges * Secondary hull / structural designs for tank (liquid cargo), hopper, deck, and dock barges * Utilize Ship constructor and AutoCAD in addition to Microsoft Office products (Excel, Word) * Upgrade 2D drawings to 3D models per company standards * Create 3D models (for piping, structural/hull) in a detail package using ShipConstructor * Creating and updating Construction Drawings for release to production * Creating and updating Shop Drawings for release to production * Creating and updating shop bills for release to production * Revising linework, references, notes, and callouts based on redline markups * Work is office-based, using computer drafting technology and software, spreadsheet software, and electronic communication daily * Coordinate with and consult with peers to design, layout, or detail complex components and resolve design of other problems * Gather information from contract specifications, earlier projects, and production capabilities to produce detailed designs and construction drawings and BOMs * May occasionally need to visit production areas to troubleshoot construction problems and offer solutions * Ability to travel, if needed. Travel is estimated at What You'll Need: * 3+ years' experience with AutoCAD * Computer Aided Drafting on assigned projects utilizing AutoCAD 2023 * Experience with ShipConstructor * Computer Aided Drafting with 3D software on assigned projects utilizing ShipConstructor 2023 (Preferred) * Working knowledge of Microsoft Word, Microsoft Excel, Microsoft Outlook, and additional Microsoft products * Ability to read & understand Marine Structural documentation (blueprints) * Complete high paced assignments through effective prioritization, scheduling, planning and execution of assigned work * Take personal responsibility for the quality and accuracy of your work

Closet Factory is the custom storage solution authority serving the need for customized space organization throughout the home. We design, sell and install custom storage around our customer's needs. For almost 40 years, Closet Factory has been creating dynamic, truly custom organization solutions for our clients. We are experiencing tremendous growth and as a result are opening a Veteran-owned branch in Alcoa, TN serving the Knoxville and surrounding areas. As such, we are looking to develop a passionate & motivated Sales team. We are looking to hire the top candidates. Our established brand and technique sets us apart from competitors due largely to you, and what our Designers can offer the customer. Greater customization, digital presentations, superior construction and empowering you with the ability to negotiate with customers will quickly place you in a position to succeed. A strong commitment to your personal development through industry leading training, education and implementing your feedback will empower you increase your success. This position is considered HYBRID. You do need to live in the greater Knoxville area to go on appointments and be required to attend biweekly meetings at the office, however some work can be done from home. Duties and Responsibilities: Present yourself in a courteous, professional manner to clients Present products and services effectively to customers Adapt to meet customer needs/wants Utilize 3D design software to create customized designs Maintain your schedule/availability in Closetware Drive in/around the area of responsibility to meet customers Qualifications for the Position: Sales experience (not retail) a must Design experience a plus Basic Computer Skills Must pass a background check Good at networking Job Benefits: The most competitive commission structure in the industry by far! Industry leading training Company matched 401K Flexible schedules High degree of autonomy Cutting edge design technology and support Team-oriented working environment and culture SALARY: Competitive commission-based pay scale. Top 10% of Designers make $180,000/yr. If you are motivated, career-minded, good at reading people, have an eye for design, and are self-motivated, this is the job for you. We recognize people as our most valuable asset and will train you to excel in your position. We value and incentivize our personnel to be successful! If you are thinking about taking the next big step in your career, this may be the opportunity you have been waiting for.

Your Role In this role you will focus on a variety of typologies, including mixed-use, retail, hospitality, commercial office buildings, headquarters, residential, and life-sciences. You will partner with Design Director(s) and team members on design concepts, presentations, schematic design, and design development. In our versatile studio, your opportunities may include ambitious towers or boutique repositioning of historic buildings. Utilizing exceptional business development skills, client relationship skills, and a portfolio of innovative, resilient design solutions with an emphasis on built work, you will work collaboratively to develop overall design concepts, formulate design presentation strategies and provide creative and process leadership to multiple design teams through all phases of projects. What You Will Do * Lead assignments that include conceptual design, schematic design, design development, construction documentation, and construction administration. * Provide strategically minded design support for organization, production and execution of projects. * Participate in seamless collaboration with internal/external teams, professional consultants and other strategic partners. * Participate in design iterations with team members in generating, 3D modeling, utilizing Revit, Sketchup, Enscape and/or other modeling or rendering software in conjunction with Adobe Creative Suite * Provide vision for proposals and strategy for interviews to secure project opportunities * Guide and mentor junior designers, assisting in leading multiple projects at a high level, working in a collaborative manner with other design and technical staff * Help to nurture and sustain client relations * Lead and contribute to office activities, help communicate key firm initiatives and learning programs * Work closely with your team and across the office and firm, to promote and model an inter-disciplinary design approach that enhances Gensler's culture of design quality and excellence. Your Qualifications * Bachelor's or Master's degree in Architecture * 10+ years of relevant experience with corresponding portfolio demonstrating various phases of project work. Be prepared to show examples of Programming, Schematic, & Design Development, CD's as well as finished project photos. * Ability to communicate and present design concepts and rationales. * Ability to address client requests, budget considerations, existing or new architectural opportunities or constraints or other impacts on design concept. * Architectural license preferred * Knowledge of sustainable and universal design concepts. * Proficient in Revit, SketchUp, Enscape, and/or other modeling software. * Graphics and visualization skills to effectively communicate design ideas. Please upload your portfolio/work samples along with your resume. This position is in-person. Successful candidates will be located in the Nashville, Tennessee area. If you're open to relocating to the area, please apply! Non-local candidates are welcome. U.S. News & World Report's 2025-2026 study ranks Nashville in the top 3 places to live in Tennessee! Life at Gensler As a people-first organization, we are as committed to enjoying life as we are to delivering best-in-class design. From curated art exhibits to internal design competitions to "Well-being Week," our offices reflect our people's diverse interests. We encourage every person at Gensler to lead a healthy and balanced life. Our comprehensive benefits include medical, dental, vision, disability, wellness programs, flex spending, paid holidays, and paid time off. We also offer a 401k, profit sharing, employee stock ownership, and twice annual bonus opportunities. Our annual base salary range has been established based on local markets. As part of the firm's commitment to licensure and professional development, Gensler offers reimbursement for certain professional licenses and associated renewals and exam fees. In addition, we reimburse tuition for certain eligible programs or classes. We view our professional development programs as strategic investments in our future. * Notice: At Gensler an unlicensed Architect will have the job title of Technical Designer. Licensed Architects will have the job title of Architect. Both operate in this capacity for alignment with internal programs, doing business with clients and compliance with industry and government regulations. If you have question regarding this notice, please ask our Talent Acquisition team during the application process.

Job DescriptionOur rapidly-growing construction company is in need of a creative, full-time CAD designer to bring our client's dreams to life! You'll serve as our primary architectural drafter and produce original, computer-generated designs in 2D and 3D. Additional responsibilities include meeting with clients, integrating feedback, and revising designs as requested. Communication skills are a must in this role, as you'll be regularly communicating the design progress to the construction team. Applicants should be experienced design engineers who enjoy highly detailed work, are passionate about working on a project from start to finish, and want to grow their career in the construction industry. Sound like a job you'd love? Please apply today! Compensation: 50000 - 65000 yearly Responsibilities: Work with construction team members to establish a timeline and budget for the design Attend preliminary meetings with the client to understand the project specifications and scope Receive feedback from construction team members and clients and revise designs accordingly Research material properties in large databases to identify the best materials for modeling Utilize computer software to generate 2D and/or 3D designs, depending on the project specifications Notify superintendents and project managers of the design's progress and when the designs are complete Qualifications: Proficient in using architectural design software, such as AutoCAD, AutoDesk BIM, Solidworks, 3DS Max, Chief Architect Premier: Construction Drawings, SketchUp, and Lumion Two-year degree or equivalent experience in architecture, construction engineering, design, or related field is preferred Highly attuned to detail and possess excellent teamwork, organizational, and communication skills At least 2 years of experience in architectural design Stay informed about architectural design software trends and knowledgeable about the industry as a whole About Company Riverview Decks Core Values Prompt & Professional Proactive Communication - We take pride in showing up when we say we will, and treating you with the respect and professionalism that you deserve while communicating with transparency. Service-minded - We naturally like to find solutions to problems and to generally help people in any way we can. We put clients first. Listen more than you speak with the intent to understand - We focus directly on what is being said so that we can be sure to address your primary concerns and objectives. Roll out the red carpet for others as a servant leader - We truly want your experience to be magnificent and filled with joyful milestones that result in an amazing transformation. We are truly here to serve you. Zero Excuses - We tolerate zero excuses in our environment.

**CMTA, a Legence company** CMTA (********************** is one of the fastest growing engineering firms in the U.S., with nationally recognized expertise in sustainable, high-performance building engineering. We are a collaborative, innovative, and energetic team that leverages a data-driven, holistic approach to consulting engineering, performance contracting, and zero energy projects. We focus on finding engineers whose skills and personalities drive them to excel, fostering a workplace that provides unparalleled growth and career opportunities. **Location:** Louisville, KY The core business of our Energy Solutions division is the delivery of Guaranteed Energy Savings Performance Contracts (ESPCs). Simply put, our ESPCs are a viable way to upgrade and renovate facilities in a budget-neutral or even budget-positive way. The process diverts money already being spent on utilities and directs it into facility upgrades, covering scope development, design, bidding, construction management, commissioning, measurement and verification, and even ongoing energy management services. We have experience in designing the nation's most energy efficient buildings, including many zero energy buildings. Our knowledge is unparalleled in the Guaranteed ESPC market, which allows us to dive deeper than our competitors. **Job Description:** The Energy Solutions division of CMTA is the fastest growing division of our large and growing company. This position will work with CAD software to create and modify technical drawings and layouts in accordance with company CAD standards. Sources of information for creating drawings will be engineer's mark-ups, existing hard copy drawings, sketches, and scanned images. Someone in this position will need to be able to: + Communicate effectively with project managers, engineers, and other CAD staff to create and revise drawings. + Manage workload including volunteering to help others as well as ask for additional support if needed. + Perform occasional site visits to obtain necessary information. + Print, scan, and organize CAD drawings as needed. **Desired Experience and Skills:** + 1-3+ years of related work experience + Prior experience with CAD software is preferred but not required + Detail oriented + Motivated to learn We are unable to provide immigration sponsorship for this position. \#LI-OS1 #LI-Onsite **About Legence** Legence (****************************** (Nasdaq: LGN) is a leading provider of engineering, consulting, installation, and maintenance services for mission-critical systems in buildings. The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems-enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Legence also delivers long-term performance through strategic upgrades and holistic solutions. Serving some of the world's most technically demanding sectors, Legence counts over 60% of the Nasdaq-100 Index among its clients. **Benefits Overview** **401(k) Plan with Company Match:** Currently match contributions dollar-for-dollar up to 4% of eligible pay; immediate vesting. **Health & Welfare Benefits:** Employer provided medical, dental, vision, prescription drug, Employee Assistance Program and accident & illness coverage. **Life and Disability Insurance:** Employer provided basic life insurance and AD&D valued at 50K coverage amount with the option for voluntary buy up for additional coverage. **Time Off:** Flexible non-accrual vacation; company holidays per policy. _(For California employees, this is separate from California paid sick leave, if applicable.)_ **Expenses:** Business travel and related expenses reimbursed per company policy. **Reasonable Accommodations** If you need assistance or accommodations during the application or interview process, please contact us at ******************* or your dedicated recruiter with the job title and requisition number. **Third-Party Recruiting Disclaimer** Legence and its affiliates do not accept unsolicited resumes from agencies; any such submissions without a prior signed agreement authorized by Legence Holdings LLC's CHRO or Director of Talent Acquisition will not incur fees and are considered property of Legence. **Pay Disclosure & Considerations** Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. **Equal Employment Opportunity Employer** Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations. EEO is the Law **Job Details** **Pay Type** **Salary** **Education Level** **Equivalent Experience**

As a Designer in our Louisville market, you will work one on one with our home buyers in selecting their new home finishes. In this role, you will provide exceptional customer service through guiding the customer through their design center appointment and informing them on the materials that will be in their home. The most rewarding aspect of this role is playing an integral role in the vision customers have for their home. You will thrive in this role if you: Have an outgoing personality and are comfortable meeting and engaging with new people. Are typically upbeat and optimistic and can be flexible to our customers' needs. Have patience and take a customer-centered approach to your work. Research products and changing design trends to remain up to date and knowledgeable about our product offerings. Can refocus individuals back to the task at hand to ensure timeliness and accuracy of the appointment. These skills will be used to: Assist customers at selection and sign off through the sale-to-start process by providing excellent customer satisfaction. Review all customer agreements prior to the Selections Appointment for build ability. Deliver error-free selection sheets. The selection sheets should clearly communicate the customers' wants and expectations so they can be properly executed. Follow up with customers, Sales Counselors, and Divisions as needed to ensure that selections and sign- offs are accurate and completed on time. Work with Division Managers and Sales Managers to design speculative inventory homes utilizing research on what will be popular for a given community and home plan. Maintain a presentable Design Center showroom. Preferred Qualifications Associate's Degree in design or related field Physical demands and work environment: Must be able to use sensory skills (i.e. verbal communication) to effectively communicate and interact with other Associates and customers. Must be able to perform repetitive motions and use fine motor skills (i.e. typing, writing) to operate office supplies (i.e. computer, calculator, copier). Must be able to lift and carry approximately 20-25lbs unassisted. Must be able to sit for long periods of time with low periods of reaching and standing. The Value of a Career with Fischer Homes Fischer Homes is one of the largest and most reputable home builders in the Midwestern and Southeastern states. Founded in 1980, the company has grown to build over 40,000 homes and employs over 700 Associates. Fischer Homes' solid reputation has been built largely by the talent of our Associates as we have been recognized as the 32nd largest builder in the United States. We value diversity within the Fischer Homes organization and see each Associate as a team member and valuable asset. We select highly competent individuals to join our team, provide them with the resources, training, and development possible to make significant contributions and drive their success while determining their career paths. The rewards for their efforts are: Professional Development Training programs Tuition Reimbursement Competitive Compensation 401(k) with Company matching contributions and profit-sharing Employee Life Insurance Personal time off Inclusive Leave Fischer Homes holds the highest ethical standards of business. We are honest and straightforward and will stand by our word. Our actions demonstrate respect, courtesy, and above all, fairness.

Job Title: Jr. Architect (Part Time) Salary: Based on experience and other relevant factors. Will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen Duties/Responsibilities: Possess and maintain proficiency in the knowledge of building codes and references related to construction of facilities and surrounding site work. Ability to read and understand requirements described on construction drawings. Perform architectural planning, design, construction support, and maintenance evaluation activities related to government buildings, test stands, and laboratory facilities, including the development of facilities design criteria statements, drawings, and specifications. Evaluate, select, and apply standard architectural and interior design principles and theory to facilities related projects. Perform field investigations of existing facilities as required to accomplish assigned tasks. Coordinate architectural work with other design team members in a total design process, to produce contract design drawings for construction activities. Support the development of cost estimates associated with proposed construction activities. Review construction submittals to ensure proper requirements are met. Respond to Requests for Information (RFI's) developed during the construction period. Participate in pre-final and final inspections. Verify accuracy of red-lined drawings produced by the Construction Contractor. Assist client Project Managers as needed during all phases of facilities planning, design, construction, and maintenance activities. Maintain orderly working files for reference as needed. Education/Experience: Bachelor's Degree in Architecture from an NAAB accredited architectural program Intent to obtain Registered Architect professional status Three or more years' experience is a plus Experience in architectural design conforming to International Building Code standards is a plus Ability to manage projects throughout the planning, design, and construction document phases, performing calculations, design drafting, reviewing of construction submittals, responding to requests for information, etc., is a plus Ability and willingness to assist designers, drafters, and other staff members in various ways that contribute to successful completion of design deliverables Knowledge and demonstrated experience in Autodesk or Bentley Microstation CAD Must have a valid motor vehicle driver's license and be insurable. Physical Requirements: Physically mobile in and around construction sites and field assignments Ability to carry required instruments and equipment. Ability to safely lift 20 pounds. Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. Benefits: Competitive salary based on experience. Comprehensive health, dental, and vision insurance. Retirement savings plan with company match. Paid time off and holidays. Professional development and career advancement opportunities. A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. *******************

We hope you're interested in building a home with us. Even if you don't feel that you meet every requirement listed in this job description, we still encourage you to apply. About the Team Our mission is to enhance the quality of our customers' lives at home. We put the customer at the center of everything we do, every day. Our corporate values that guide our actions and decisions are our People First culture, customers, quality, shareholders, integrity, and corporate responsibility. Overview of the Design Studio Specialist role You will inspire customers to express themselves in their home. You will bring the shopping experience to a seamless close as you assist customers and complete sales at the cash wrap. You will promote continued customer engagement and give customers a reason to stay connected with our Brand. Responsibilities * Utilize design expertise to assist clients in one on one consultations in the store and in-home regarding the design of their living spaces to drive store sales * Perform productive in-home consultations including the ability to accurately measure and assess the client's living space * Create and present design plans based on client's needs, style, preferences and living space * Maintain knowledge of current sales and promotions in order to achieve and exceed established sales and productivity goals * Utilizing exemplary World class service standards assist customers with special services including: gift wrap, gift registry, locating merchandise, catalog/internet orders, special orders, back orders, charge sends, courier deliveries, and furniture orders * Demonstrate superior product knowledge, including features and benefits of the entire design studio assortment Criteria * Strong communication, clienteling and customer follow-up skills * Ability to complete and coordinate complex large orders within a variety of sales channels * Experience in working with the elements of design preferred * Proven ability to prioritize and handle multiple tasks simultaneously * 1-2 years of customer service and retail sales experience, (specialty retail preferred, but not required) Physical Requirements * Must be able to be mobile on the sales floor for extended periods of time * Must be able to lift and mobilize medium to large items, up to 75 lbs., while utilizing appropriate equipment and safety techniques * Full time associates are expected to have open availability to meet the needs of the business. * Part-Time Flex associates must be available to work a minimum of 15 hours per week, including two regularly scheduled shifts on the weekend (Saturday and Sunday) and two during the week (Monday to Friday). Associates must be available for annual inventory and entire holiday season (November and December). Weekend availability cannot fall on the same day; an associate must be available on two separate days (Saturday and Sunday). Our Mission Around Diversity, Equity & Inclusion We firmly believe that working in a culture focused on diversity, equity, and inclusion spurs innovation, creates healthy and high-performing teams, and delivers superior customer experiences. We will create and nurture a global company culture where we confidently bring our authentic selves to work every day: where the only criteria for advancement are the quality of our work, the contributions we make to our teams and the business, and our ability to lead; and where our individual differences-whatever they may be-are valued, explored and appreciated. Benefits Just for You Depending on your position and your location, here are a few highlights of what you might be eligible for: * A generous discount on all Williams-Sonoma, Inc. brands * A 401(k) plan and other investment opportunities * A wellness program that supports your physical, financial and emotional health * Paid vacations and holidays (full-time) * Health benefits, dental and vision insurance, including same-sex domestic partner benefits (full-time) Your Journey in Continued Learning * Individual development plans and career pathing conversations * Annual performance appraisals * Cross-brand and cross-functional career opportunities * Online learning opportunities through brand specific resources and WSI University * Leadership development opportunities WSI will not now or in the future commence an immigration case or "sponsor" an individual for this position (for example, H-1B or other employment-based immigration This role is not eligible for relocation assistance. Williams-Sonoma, Inc. is an Equal Opportunity Employer. San Francisco Locations: Williams-Sonoma, Inc. is an Equal Opportunity Employer. Williams-Sonoma, Inc. will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the San Francisco Fair Chance Ordinance, or other applicable state or local laws and ordinances.

Java Technician Architect with VTEXLocation : Letts Ville, TN(onsite) Job Description: Architectural Design:** Design and develop architectural solutions for complex software systems, ensuring they meet business requirements and are scalable, maintainable, and secure. Java Development:** Lead the development of Java-based applications, ensuring high-quality code and adherence to best practices. Spring Boot & Microservices:** Design and implement microservices architecture using Spring Boot, ensuring seamless integration and communication between services. Kafka Integration:** Implement and manage Kafka for real-time data streaming and processing. Cloud Solutions:** Design and deploy applications on AWS or any other cloud platform, ensuring optimal performance, scalability, and cost-efficiency. Technical Leadership:** Provide technical guidance and mentorship to development teams, ensuring best practices in coding, design, and architecture. Collaboration:** Work closely with stakeholders, including product managers, developers, and operations teams, to ensure successful project delivery. Continuous Improvement:** Stay updated with emerging technologies and industry trends, and incorporate them into the architectural design. VTEX certification is highly recommended. Required Skills: Java Coding:** Extensive hands-on experience with Java programming and related frameworks. Experience in commerce tools Spring Boot:** Proficiency in developing applications using Spring Boot. Microservices:** Strong understanding and experience in designing and implementing microservices architecture. Kafka:** Experience with Kafka for data streaming and processing. Cloud Platforms:** Proficiency in AWS or any other cloud platform, including services like EC2, S3, Lambda, and RDS. Database Management:** Experience with SQL and NoSQL databases. DevOps Practices:** Understanding of CI/CD pipelines, automated testing, and infrastructure as code (IaC). Problem-Solving:** Strong analytical and problem-solving skills. Communication:** Excellent communication skills, both verbal and written. Leadership:** Proven ability to lead and mentor technical teams. **Qualifications:** Bachelor's or Master's degree in Computer Science, Engineering, or a related field. 10 + years of experience in software development and architecture. Proven experience in a technical leadership role

EEOC Statement “Lifepoint Health is an Equal Opportunity Employer. Lifepoint Health is committed to Equal Employment Opportunity for all applicants and employees and complies with all applicable laws prohibiting discrimination and harassment in employment.” You must be authorized to work in the United States without employer sponsorship. Key Responsibilities Acute Care integration planning: Manage the integration of Acute Care Hospital infrastructure and clinical technology platforms based on LifePoint standards while maintaining an ongoing understanding of the LifePoint Technology Roadmap to ensure seamless integration. Technology Leadership and Planning: Own the technology roadmap execution specific to the Acute Care service line and develop effective relationships and communications across all areas of the business to enable the execution of LifePoint's enterprise technology roadmap. Data Interoperability and Migration: Enable the migration of medical data (e.g., patient records, billing data) into LifePoint's systems, ensuring interoperability, data integrity, and compliance with HIPAA and other regulations. IT Project Management: Lead technology-focused integration projects, including timelines, milestones, and deliverables, to ensure successful system transitions on schedule and within budget. ADDITIONAL INFORMATION: Position serves both internal co-workers and external customers, clients, patients, contractors, and vendors. Access to and / or works with sensitive and / or confidential information. KNOWLEDGE, SKILLS & ABILITIES: The requirements listed below are representative of the knowledge, skills and/or abilities required. Education: Bachelor's Degree or relevant equivalent experience; Master's degree preferred. Experience: Preferred 7 years of management experience in a multi-facility healthcare operation. Project Management skills required. Certifications: TOGAF, Zachman, ITIL, CISSP, Project Management Professional (PMP) and other infrastructure certifications preferred. SKILLS AND ABILITIES: The requirements listed below are representative of the knowledge, skills and/or abilities required. Exhibit a comprehensive understanding of healthcare regulatory and compliance (e.g., HIPAA). Skilled in the application of policies and procedures. Knowledge of Business Office Standards and Recommended Practices. Mathematical Skills Statistical Mathematical Skills -- Ability to work with mathematical and algebraic concepts such as probability, statistical inference, and forecasting. Ability to apply and analyze concepts such as fractions, percentages, ratios, and proportions to practical situations. Computer Skills Advanced Technical Computer Skills -- Utilize complex computer operations (intermediate / advance programming, relational databases, and operating systems) and advanced features of software packages. Communication Organizational Communication -- Handles broad-based complex information across departments with company-wide impact. Presents to diverse audiences, and can negotiate, motivate and persuade others. Decision Making Organizational Impact -- Decisions have significant, broad implications for the management and operations of a division. Job contributes to decisions on the overall strategy and direction of LifePoint. Nature of Problems Organizational Business Problems -- Problems are broad, complex and abstract, often involving company-wide issues. Must develop solutions using substantial creativity, resourcefulness, innovation, negotiation and diplomacy. Independent Judgement Organizational Judgement -- Sets direction and vision for major departments or multiple departments. Establishes priorities, develops policies and allocates resources for LifePoint. Planning/Organization Organizational -- Prioritize, organize, and delegate project assignments company-wide: responsible for project outcomes. PHYSICAL AND MENTAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job responsibilities. While performing the duties of this job, the employee is occasionally required to stand; walk; sit for extended periods of time; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, bend, crouch or crawl; talk or hear; taste or smell. The employee must occasionally lift and/or move up to 20 pounds. Repetitive motion of upper body required for extended use of computer. Required specific vision abilities include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT AND TRAVEL REQUIREMENTS: Work environment characteristics described here are representative of those that an employee may encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job responsibilities. In hospital environment, may be exposed to hazards and unusual elements, which may include but are not limited to bloodborne pathogens and / or contagious illnesses, toxic chemicals, and biohazardous materials which may require extensive safety precautions and the use of protective equipment. Noise level in the work environment is typical for an office and/or hospital environment. Minimum overnight travel (up to 10%) by land and/or air.

Purpose Create accurate erection drawings that visually represent EFCO forming systems for use in sales, manufacturing, and field operations. Support project objectives while growing technical expertise in drafting, EFCO equipment, and engineering principles. EFCO Culture & Safety Statement Act with Integrity by demonstrating honesty, responsibility, trustworthiness, and respect in all actions. Strive for Quality through continuous improvement and data-driven decision-making. Embrace Innovation by being self-aware, collaborative, and curious. Deliver Super Service by creating value and consistently exceeding customer expectations. At EFCO, the health and safety of our team members, visitors, and contractors is an overriding priority and EFCO is committed to promoting a safe and healthy work environment by requiring all team members to participate in environmental, safety, and health program activities. Essential Functions Erection Drawings (70%) Create basic erection drawings for standard and custom projects under supervision. Ensure clarity and accuracy by following EFCO procedures, collaborating with engineers, and validating all design details. Equipment Support (20%) Assist with equipment list setup and adjustments for assigned jobs. Support alignment with project specs and priorities across districts through strong organizational awareness. Learning and Development (10%) Participate in training programs and mentorship to improve product knowledge and CAD skills. Use creativity to solve design challenges and support ongoing innovation initiatives. Additional duties may be assigned as required by business necessity may be added, deleted, or changed at any time at the discretion of management, formally or informally, either verbally or in writing to meet organizational goals and priorities. Qualifications Education: High school diploma or equivalent required. Drafting coursework preferred. Experience: Revit experience required. Construction or engineering experience preferred. Certification(s) and License(s): N/A Leadership: N/A Computer Skills: Proficiency in basic CAD software required . Other Requirements: Mechanical aptitude and basic math skills required . Strong organizational and problem-solving ability. Core Competencies Technical Skills: Proficiently uses job-specific tools, systems, and procedures to perform tasks effectively. Creativity: Generates innovative ideas and solutions to improve outcomes or processes. Organizational Awareness: Understands the company's structure, priorities, and how decisions impact the broader business. Professionalism: Demonstrates reliability, accountability, and a respectful approach to all work and interactions. Direction, Planning, Organization: Sets clear objectives, aligns efforts, and manages time and resources to achieve results. EFCO is an Equal Opportunity Employer. Qualified applicants for employment will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Physical Demands Light: Exerting up to 20 lbs of force occasionally and/or up to 10 lbs. force frequently and/or a negligible amount of force constantly. To ensure a safe work environment while meeting the physical demands of the job you must be able to perform the following physical and mental tasks with or with or without reasonable accommodation: Balancing - maintaining equilibrium when walking, climbing, crouching, etc.: Constantly Repetitive Motions - Substantial movements (motions) of the wrists, hands, and/or fingers: Occasionally Stooping - Bending at the waist: Occasionally Sitting/Standing - Must be able to sit or stand as required for extended periods of time: Frequently Lifting motions or lifting objects up to 20 lbs: Occasionally Walking: Frequently Climbing - Ascending or descending ladders, stairs, scaffolding, ramps, poles etc.: Occasionally Hearing: Frequently Talking: Frequently Capacity to think, concentrate and focus for long periods of time: Frequently Ability to read complex documents in the English language: Frequently Capacity to reason and make sound decisions: Frequently Ability to write complex documents in the English language: Frequently Capacity to express thoughts orally: Frequently Expertise in: Ability to regularly perform all job functions at company office or designated worksite Ability to withstand environmental conditions such as extreme heat or cold, grass, wind, sand, fumes, odors, gases, noises. Etc. The position is currently classified as on- site. The company reserves the right to modify, update, change and/or make corrections to this job description, at the sole discretion of senior leadership, at any time during the employee's employment term, at the sole discretion of management.

EEOC Statement "Lifepoint Health is an Equal Opportunity Employer. Lifepoint Health is committed to Equal Employment Opportunity for all applicants and employees and complies with all applicable laws prohibiting discrimination and harassment in employment." You must be authorized to work in the United States without employer sponsorship. Key Responsibilities Acute Care integration planning: Manage the integration of Acute Care Hospital infrastructure and clinical technology platforms based on LifePoint standards while maintaining an ongoing understanding of the LifePoint Technology Roadmap to ensure seamless integration. Technology Leadership and Planning: Own the technology roadmap execution specific to the Acute Care service line and develop effective relationships and communications across all areas of the business to enable the execution of LifePoint's enterprise technology roadmap. Data Interoperability and Migration: Enable the migration of medical data (e.g., patient records, billing data) into LifePoint's systems, ensuring interoperability, data integrity, and compliance with HIPAA and other regulations. IT Project Management: Lead technology-focused integration projects, including timelines, milestones, and deliverables, to ensure successful system transitions on schedule and within budget. ADDITIONAL INFORMATION: Position serves both internal co-workers and external customers, clients, patients, contractors, and vendors. Access to and / or works with sensitive and / or confidential information. KNOWLEDGE, SKILLS & ABILITIES: The requirements listed below are representative of the knowledge, skills and/or abilities required. Education: Bachelor's Degree or relevant equivalent experience; Master's degree preferred. Experience: Preferred 7 years of management experience in a multi-facility healthcare operation. Project Management skills required. Certifications: TOGAF, Zachman, ITIL, CISSP, Project Management Professional (PMP) and other infrastructure certifications preferred. SKILLS AND ABILITIES: The requirements listed below are representative of the knowledge, skills and/or abilities required. Exhibit a comprehensive understanding of healthcare regulatory and compliance (e.g., HIPAA). Skilled in the application of policies and procedures. Knowledge of Business Office Standards and Recommended Practices. Mathematical Skills Statistical Mathematical Skills -- Ability to work with mathematical and algebraic concepts such as probability, statistical inference, and forecasting. Ability to apply and analyze concepts such as fractions, percentages, ratios, and proportions to practical situations. Computer Skills Advanced Technical Computer Skills -- Utilize complex computer operations (intermediate / advance programming, relational databases, and operating systems) and advanced features of software packages. Communication Organizational Communication -- Handles broad-based complex information across departments with company-wide impact. Presents to diverse audiences, and can negotiate, motivate and persuade others. Decision Making Organizational Impact -- Decisions have significant, broad implications for the management and operations of a division. Job contributes to decisions on the overall strategy and direction of LifePoint. Nature of Problems Organizational Business Problems -- Problems are broad, complex and abstract, often involving company-wide issues. Must develop solutions using substantial creativity, resourcefulness, innovation, negotiation and diplomacy. Independent Judgement Organizational Judgement -- Sets direction and vision for major departments or multiple departments. Establishes priorities, develops policies and allocates resources for LifePoint. Planning/Organization Organizational -- Prioritize, organize, and delegate project assignments company-wide: responsible for project outcomes. PHYSICAL AND MENTAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job responsibilities. While performing the duties of this job, the employee is occasionally required to stand; walk; sit for extended periods of time; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, bend, crouch or crawl; talk or hear; taste or smell. The employee must occasionally lift and/or move up to 20 pounds. Repetitive motion of upper body required for extended use of computer. Required specific vision abilities include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT AND TRAVEL REQUIREMENTS: Work environment characteristics described here are representative of those that an employee may encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job responsibilities. In hospital environment, may be exposed to hazards and unusual elements, which may include but are not limited to bloodborne pathogens and / or contagious illnesses, toxic chemicals, and biohazardous materials which may require extensive safety precautions and the use of protective equipment. Noise level in the work environment is typical for an office and/or hospital environment. Minimum overnight travel (up to 10%) by land and/or air.

Your Role In this role you will focus on a variety of typologies, including mixed-use, retail, hospitality, commercial office buildings, headquarters, residential, and life-sciences. You will partner with Design Director(s) and team members on design concepts, presentations, schematic design, and design development. In our versatile studio, your opportunities may include ambitious towers or boutique repositioning of historic buildings. Utilizing exceptional business development skills, client relationship skills, and a portfolio of innovative, resilient design solutions with an emphasis on built work, you will work collaboratively to develop overall design concepts, formulate design presentation strategies and provide creative and process leadership to multiple design teams through all phases of projects. What You Will Do Lead assignments that include conceptual design, schematic design, design development, construction documentation, and construction administration. Provide strategically minded design support for organization, production and execution of projects. Participate in seamless collaboration with internal/external teams, professional consultants and other strategic partners. Participate in design iterations with team members in generating, 3D modeling, utilizing Revit, Sketchup, Enscape and/or other modeling or rendering software in conjunction with Adobe Creative Suite Provide vision for proposals and strategy for interviews to secure project opportunities Guide and mentor junior designers, assisting in leading multiple projects at a high level, working in a collaborative manner with other design and technical staff Help to nurture and sustain client relations Lead and contribute to office activities, help communicate key firm initiatives and learning programs Work closely with your team and across the office and firm, to promote and model an inter-disciplinary design approach that enhances Gensler's culture of design quality and excellence. Your Qualifications Bachelor's or Master's degree in Architecture 10+ years of relevant experience with corresponding portfolio demonstrating various phases of project work. Be prepared to show examples of Programming, Schematic, & Design Development, CD's as well as finished project photos. Ability to communicate and present design concepts and rationales. Ability to address client requests, budget considerations, existing or new architectural opportunities or constraints or other impacts on design concept. Architectural license preferred Knowledge of sustainable and universal design concepts. Proficient in Revit, SketchUp, Enscape, and/or other modeling software. Graphics and visualization skills to effectively communicate design ideas. Please upload your portfolio/work samples along with your resume. This position is in-person. Successful candidates will be located in the Nashville, Tennessee area. If you're open to relocating to the area, please apply! Non-local candidates are welcome. U.S. News & World Report's 2025-2026 study ranks Nashville in the top 3 places to live in Tennessee! Life at Gensler As a people-first organization, we are as committed to enjoying life as we are to delivering best-in-class design. From curated art exhibits to internal design competitions to “Well-being Week,” our offices reflect our people's diverse interests. We encourage every person at Gensler to lead a healthy and balanced life. Our comprehensive benefits include medical, dental, vision, disability, wellness programs, flex spending, paid holidays, and paid time off. We also offer a 401k, profit sharing, employee stock ownership, and twice annual bonus opportunities. Our annual base salary range has been established based on local markets. As part of the firm's commitment to licensure and professional development, Gensler offers reimbursement for certain professional licenses and associated renewals and exam fees. In addition, we reimburse tuition for certain eligible programs or classes. We view our professional development programs as strategic investments in our future. *Notice: At Gensler an unlicensed Architect will have the job title of Technical Designer. Licensed Architects will have the job title of Architect. Both operate in this capacity for alignment with internal programs, doing business with clients and compliance with industry and government regulations. If you have question regarding this notice, please ask our Talent Acquisition team during the application process.