Ascent Resources jobs - 1,659 jobs

Description Ascent Resources is seeking an experienced Compression Foreman. This position is located out of the Morristown, OH field office and will report to the Production Superintendent. This position is responsible for managing and leading the compression team in accordance with Ascent's standard operating procedures and company best management practices. Primary Duties & Responsibilities Develop reports including providing mentorship and training, providing meaningful and achievable goals, and providing support on career development. Foster a culture of continuous improvement Manage compression team by ensuring optimization objectives for all routes are prioritized and met. Manage compressor team schedule Manage compression vendors. Ensure that objectives regarding safety, operational KPIs, and economic value proposition are being met Manage compression data. Ensure the accuracy of compression databases (eMaint, PI, etc.) Complete compressor selection and execute contracts with vendors and supply chain based on the requirements provided by production engineering including timing, compressor type, horsepower, stages, and rental agreement Manage and optimize rental compression fleet to minimize extra and idle compression. Prepare schedule and ensure execution of compressor installations. Relocate and release units as necessary to meet optimization objectives Manage noise mitigation. Arrange sound studies for new compressor installations ensuring adequate time to prevent schedule delays Prepare compressor installation project scope documentation based on the standard design. Schedule pre-job meeting to review responsibilities of the vendor, construction, I&E, compression, and operations Prepare compressor installation AFEs based on inputs from compression, I&E, and engineering Track and report capital and operational performance including, compressor runtime, mechanical availability, AFE variance, and LOE variance Manage engine testing. Coordinate with EHS to ensure regulatory compliance Ensure leak repair and emissions compliance on compression assets Complete JSAs and safety meetings with everyone on location prior to completing tasks to communicate and understand the hazards of work being completed Report incidents into the appropriate systems and communicate to supervisor. Complete incident investigations and implement corrective actions Complete required computer based and instructor led training Other duties as assigned by supervisor Knowledge, Skills & AbilitiesMinimum Requirements: Advanced knowledge and compliance with safety and environmental policies and procedures Demonstrates competent operation and care of Ascent motor vehicles Advanced process knowledge including SOPs, fluid mechanics, separation mechanics, P&ID and PFD interpretation, piping specifications, and equipment components Advanced knowledge of troubleshooting compressors and facility issues Advanced knowledge on subsurface principles including subsurface equipment, production optimization, and liquid unloading operations Advanced ability to use business software applications (eMaint, eVIN, PI, SCADA, KPA, Microsoft Office Suite, Wellview, etc.) Excels at teaching and mentoring. Interacts and communicates in a professional manner Ability to make unbiased, data-driven decisions Ability to multi-task Attention to detail Ability to anticipate and position for changes in the development schedule with margins of safety and contingency planning Education & Work Experience RequiredMinimum Requirements: High school diploma or GED 10+ years of oil & gas compression experience 5+ years managerial experience Must have experience with a wide range of engines and compressors of all sizes Strong knowledge of MS Office, including Word, Excel, and Outlook Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Ability to be on feet for extended periods and easily move around piping and other equipment on location Tolerance to extreme weather conditions Drive to remote locations within the operating area Ability to lift up to 50 lbs. Ability to sit at an office desk for extended periods of time Ascent Benefits Benefits start day one Generous 401(k) PTO based on industry or job-related experience Tuition assistance after 1 year Twelve paid holidays Many volunteer opportunities Gym reimbursement Ascent Resources provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Ascent complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

As a Representative, you'll provide extraordinary care to our members, partners, plan sponsors and investment professionals. You will understand high-level product/plan and regulatory requirements to analyze and resolve general account, plan fees or plan inquiry questions will be key to success. Additionally, you'll effectively interpret and articulate marketing strategies when communicating with customers. Key Responsibilities: Receives and responds to incoming calls from investment professionals, plan sponsors and members on a variety of topics. Understands the different product suites, including current line-up and products no longer sold that still require servicing. Responsible for interpreting and applying all changes and enhancements to new and old products, based on the daily change communications. Identifies the question(s) behind the question to proactively offer consultative expertise and uncover the unstated need. Maintains a record of the conversations and follows a process of documentation to support our strategy of knowing our member better than anyone and use the information in a way that drives the relationship deeper. Follows all rules and regulations to ensure compliance with FINRA or other professional licensure requirements, Nationwide policies, firms, plan documents and state and local laws. Educates customers to ensure understanding of tax implications, penalties/surrender charges, death benefit protection, lifetime income, capital preservation and/or benefits pertaining to the plan/contract. Analyzes problems to determine proper course of action, striving for first time final resolution. When necessary, works with internal partners to resolve escalated issues. Integrates lean methodology into daily interactions through problem-solving meetings and team huddles. Develops and grows through monthly individual meetings with leadership to set in place a career path strategy. Setting goals and expectations to achieve success in the role as well as future opportunities. May perform other duties as assigned. Education: High school diploma or equivalent required. Undergraduate degree in finance, business administration, insurance, economics, communications preferred. License/Certification/Designation: ChFC, CLU, other industry designations desirable FINRA series 6 and/or 26 licenses preferred and may be required based on assigned product/line-of-business or distribution system. Experience: One year of experience in customer service, sales related occupations. Knowledge, Skills and Ability: Knowledge of various insurance products and the sales process. Solid understanding of the state and local laws necessary to understand the legal implications of certain product features in different states. Understands the consequences of not following the FINRA rules and regulations. Excellent verbal and written communication skills to effectively communicate with others. Proficiency with computers and common office software. Ability to understand general aspects of plan/contract and utilizes technology to enhance conversations with customers. Other criteria, including leadership skills, competencies and experiences may take precedence.

:Requisition Number: 28336 When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation's premier propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customer...

MSD is looking for a Safety Manager to join our team! Join Our Team as a Safety Manager - Leading the Way to a Safer Tomorrow Are you passionate about ensuring safety in the workplace and protecting those who contribute to your company's success? We are looking for a dynamic and dedicated Safety Manager to lead and maintain our safety programs, training initiatives, and compliance efforts in a fast-paced and rewarding construction environment. As a Safety Manager, you will be at the heart of our commitment to creating and maintaining a culture of safety, overseeing all aspects of our organizational safety programs, and ensuring strict adherence to OSHA, BWC, and other regulatory requirements. You'll play a key role in improving safety standards, training team members, and fostering a workplace where every individual can thrive in a safe environment. Minimum requirements: Bachelor's degree in Safety Management or related field preferred 7+ years' experience in a construction field preferred Must possess/ able to obtain OSHA 30, 500, 502, & 510 Able to operate productivity software, such as Microsoft Office suite General understanding of Safety and OSHA compliance in a construction environment Able to clearly communicate in written and verbal English Unencumbered US Driver's license US Citizenship or Permanent Resident Status required Key Responsibilities Include: Manage Safety Programs & Training: Oversee and maintain safety programs, including team training, on-boarding for new hires, and continuous safety education for all employees, including supervisory staff. Ensure Compliance & Reporting: Maintain compliance with OSHA, BWC, and other regulations, ensuring timely filing of necessary reports. Incident & Risk Management: Lead incident investigations, manage workers' compensation claims, and ensure injured personnel are appropriately cared for. Address safety concerns at job locations and ensure adherence to safety policies. Safety Advocacy & Recognition: Develop and implement safety recognition programs and track safety performance to continuously improve workplace safety. Safety Leadership & Oversight: Organize safety committee meetings, participate in job bidding processes, and ensure safety policies are incorporated into company operations. Maintain up-to-date safety program handbooks. Ongoing Professional Development: Continuously improve safety knowledge through participation in local, state, and federal safety training programs. Benefits: FREE Training and Education PTO 401(k) match Bonus Program Competitive Medical, Vision, and Dental Health Savings Account match Company paid Short- and Long-Term Disability Company paid Life Insurance Policy We value our employees and are committed to doing everything possible to ensure your continued growth and opportunities! Mechanical Services & Design complies with applicable federal civil rights laws and does not discriminate, exclude people, or treat them differently because of race, color, ethnicity, religion, culture, language, national origin, age, disability, socioeconomic status, sex, sexual orientation, or gender identity or expression in its various programs and activities.

We are looking for you ! AIRGAS is Hiring for a Evening Shift Logistics Coordinator- Independence, OH - Location: Independence, OH - Compensation: $23.00/ Hour Annual Bonus. Work Schedule: 6 pm - 6 am, 12 hours shifts with 8 hour OT built in every ot Logistics Coordinator, Logistics, Coordinator, Operations, Forecasting, Transportation, Manufacturing

Title: Field Services Project Manager Schedule: M-F Duration: Permanent Must Have: Bachelor's degree in Chemistry, Environmental Engineering, or a related field. Equivalent experience will be considered. Minimum five years direct work experience in a project management capacity, including all aspects of process development and execution. Sales experience is a plus. Ability to provide technical proposals and price estimates for projects. Strong working knowledge/understanding of environmental and related regulations (RCRA, OSHA, DOT, etc.) is required. Working knowledge of various hazardous waste disposal technologies (incineration, wastewater treatment, landfill, fuel blending, etc.) Must possess the ability to work independently and in a team oriented, collaborative environment. Must be able to conform to shifting priorities, demands and timelines. Must possess and demonstrate the ability to grow and expand field service capabilities and meet our sales budget objectives. Must have the desire and ability to travel extensively (Day trips and up to 5 overnights a month) Day to day: Responsible for providing business plans, project plans, forecasting both revenue and expenses, and providing input to strategic planning in coordination with RIS, RTS, and RES. Develops and coordinates site safety plans, coordinates resources and project materials, and oversees on-site supervision for the completion of field work. Negotiates with other department managers for the acquisition of required personnel from within the Ross companies, when required. Coordinates billing and related activities with our RES accounting department, RES sales department, and our customers. Manages and coordinates field service activities between the customer and the Ross companies. Oversees supervision of internal and/or external labor on an as-needed basis to complete Field Service Projects. Serves as a technical advisor in the field, ensuring that materials are properly sampled, characterized, profiled, manifested, segregated, packaged, shipped, and to perform industrial services in a safe and compliant manner. Serves as liaison between the customer and the Ross companies: Builds relationships with vendors, customers and subcontractors to ensure work is performed effectively and within regulatory guidelines. Provides project proposals and estimates to the customer and/or RES for Field Service Projects. Provides technical support for the RES sales force including traveling to job sites, providing technical support for our customers, and providing customer based solutions grow our field service capabilities. Supervises and directs the work of the Field Service Project Coordinator including performance management, time management, goal setting, etc. Controls business expenses and maximizes project profitability. Works with RIS to coordinate Corrective Actions on our customer's waste receipts (special repackaging, box/tanker heel clean-outs). Wears personal protective equipment (PPE) as needed and in accordance with safety policies and procedures. Enters confined spaces as required and in accordance with safety policies and procedures. Works indoors and outdoors. Daily use of advanced PC and business computer applications, telephone conferencing and e-mail.

Are you ready to be part of a company that's not just talking about the future, but actively shaping it? Join The AES Corporation (NYSE: AES), a Fortune 500 company that's leading the charge in the global energy revolution. With operations spanning 14 countries, AES is committed to shaping a future through innovation and collaboration. Our dedication to innovation has earned us recognition as one of the Top Ten Best Workplaces for Innovators by Fast Company in 2022. And with our certification as a Great Place to Work, you can be confident that you're joining a company that values its people just as much as its groundbreaking ideas. AES is proudly ranked #1 globally in renewable energy sales to corporations, and with $12.7B in revenues in 2023, we have the resources and expertise to make a significant impact as we provide electricity to 25 million customers worldwide. As the world moves towards a net-zero future, AES is committed to meeting the Paris Agreement's goals by 2050. Our innovative solutions, such as 24/7 carbon-free energy for data centers, are setting the pace for rapid, global decarbonization. If you're ready to be part of a company that's not just adapting to change, but driving it, AES is the place for you. We're not just building a cleaner, more sustainable future - we're powering it. Apply now and energize your career with a true leader in the global energy transformation. The Short-Term Trader/Dispatcher I is in charge of the strategic management of AES generation assets in the Day-Ahead and Real-Time energy markets within various Regional Transmission Organizations (RTOs)/Independent System Operators (ISOs). This is a role within AES Clean Energy Market Operations and is a 24X7 operation. Employees will work abnormal schedules which include nights, weekends, and holidays. Personal flexibility to adjust schedules as needed is fundamental. This position is posted as a range of I-II. Qualifications, education and experience will be considered in resolving appropriate grade level. Duties and Responsibilities: Handling the Day-Ahead and Real-Time operations of the AES Clean Energy Portfolio. Dispatching generation based upon economic conditions and operational constraints. Developing load and wind generation forecasts. Scheduling the Day-Ahead bidding of power into the respective RTO/ISO market. Monitoring and analyzing market information to identify dispatching and trading opportunities to increase profitability. Monitoring weather forecasts within various RTO/ISO markets. Running dispatch and trade decisions with a continuous focus on balancing risk versus return to produce maximum profitability. Coordinating unit availability, outage schedules, unit start-up and shutdown times, and communicating all vital information to commercial operations, plant personnel and the respective RTO/ISO. Ensuring compliance with AES Risk Management Policy. Verifying transactions and settlement information and resolve discrepancies as needed. Education/Experience Short-Term Trader/Dispatcher I: Bachelor's degree, preferably in Business, Engineering, Finance, or a computer-related field. 0-2 years of energy experience preferred. Desired areas of expertise: power generation coordination and marketing, real-time scheduling and dispatch, or power trading. PJM Generation Certification preferred. If not certified, must have ability to become certified within six months. Knowledge/Skills Knowledge of the wholesale power market. Knowledge of multiple RTOs/ISOs (PJM, CAISO, ERCOT, ISONE, NYISO, MISO). General knowledge of FERC and NERC rules and regulations preferred, but not required. Excellent interpersonal skills. Strong attention to detail. Ability to work independently and tackle problems with limited supervision. AES is an Equal Opportunity Employer who is committed to building strength and delivering long-term sustainability through diversity and inclusion. Respecting all backgrounds, differences and perspectives enables us to improve the lives of our people, customers, suppliers, contractors, and the communities in which we live and work. All qualified applicants will receive consideration for employment without regard to sex, sexual orientation, gender, gender identity and/or expression, race, national origin, ethnicity, age, religion, marital status, physical or mental disability, pregnancy, childbirth, or related medical condition, military or veteran status, or any other characteristic protected under applicable law. E-Verify Notice: AES will provide the Social Security Administration (SSA) and if necessary, the Department of Homeland Security (DHS) with information from each new employee's I-9 to confirm work authorization.

Are you interested in a position that is challenging and innovative? Be part of what's next! Oil States Industries, Inc. is a highly respected global designer and manufacturer of diverse products for offshore platforms, subsea pipelines, defense, and general industrial applications. Since our founding in 1942, we have been known as innovators - crossing new frontiers in all the markets we serve. We continue to pioneer products and solutions through application of our technologies across industry boundaries. Oil States recognizes that our employees are our greatest asset, and we offer employee programs that enrich and protect our employees. Oil States is currently looking for qualified candidates for the position of Manufacturing Lead for our Tulsa, Oklahoma location in our organization, the Manufacturing Lead has a critical and challenging role in helping achieve innovation and meeting our commitments. POSITION SUMMARY: Prepares and operates molding press to process/produce a high-quality product. Ensures production continuity of press lines. Troubleshoots equipment and processes as need arises. Assists operators with documentation and processes. Ensures molding records reflect accuracy of the day's production. Fills in for Molding Supervisor. ESSENTIAL DUTIES AND RESPONSIBILITIES: Sets up press-checking tonnage, cure time, temperature, speed control etc. Retrieves preforms/extrusions/inserts for job as needed. Makes sure paperwork is filled out correctly. Approves time in Mercury (Kronos). Has an understanding of the molding processes at all skill levels. Understands how to operate press according to job specifications. Insures MIP's are being followed. Inspects parts for flaws. Helps troubleshoot molding of rejected parts. Records time and work on the labor ticket each day. Checks production records for job completion and upcoming assignments. Communicates with support departments as necessitated by production needs. Assigns presses as necessary. Assists employees as needed. Communicates all production/press-related information to the next shift lead or shift Supervisor. Understands LEAN concepts, such as TAKT, time, capacity measures, etc. Perform all tasks as required of a Safety Sensitive position. OTHER DUTIES AND RESPONSIBILITIES: Fills in for supervisor when needed Assists with mold installation as needed Assists with material handling between departments as needed Facilitates the training of press operators at all levels Moves molding materials from the staging area to the pressline Able to relieve and fill-in during lunch breaks and operate press QUALIFICATION REQUIREMENTS: Minimum of one-year related experience General experience in a production environment filling a supervisory role Ability to multi-task Problem solving/decision making skills Ability to prioritize Attention to detail and accuracy Conversion of weights and measures Comprehension of written and verbal communication skills Problem solving skills Basic mathematical skills (addition/subtraction, multiplication/division) PHYSICAL REQUIREMENTS: Prolonged standing/walking Repetitive motion of finger, wrist, elbow, shoulder, or neck movement Keyboard work Occasional forceful hand grasp Ability to read Occasional bending/twisting/crouching and squatting Use of vibrating tools Able to hear and speak clearly Lifting, pulling, and carrying up to/in excess of 50 pounds Reaching from shoulder level or below/over shoulder level Frequent climbing of ladders/scaffolds/step stools and stairs Ability to see to distinguish colors, prepare/analyze figures, prepare/review documents and to visually inspect items Use of machinery and machinery that produces excessive heat Ability to endure a hot work environment WORK ENVIRONMENT/ENVIRONMENTAL CONDITIONS: Exposure to extreme heat for more than an hour Bright environment or lighting SAFETY SENSITIVE POSITION: This position is designated as a Safety Sensitive Position as defined by the Oklahoma Medical Marijuana and Patient Protection Act. This job description in no way states or implies that these are the only duties to be performed by this position. The incumbent is required to perform any other duties requested by his/her supervisor. An E-Verify Employer Un empleador de E-Verify

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. The Lead Business Analyst supports the enterprise forecasting process by leading demand forecasting governance, performance monitoring, and process standardization across the Fuels Value Chains (FVC). The role ensures consistency, accuracy, and alignment of demand forecasts, serving as the central point of coordination for the new Demand Management system (Kinaxis - Maestro). This position defines and maintains enterprise forecasting standards, methodologies, and performance metrics that promote data integrity and forecasting practices. The Lead Business Analyst monitors forecast accuracy, bias, and adherence to governance processes, using these insights to identify improvement opportunities and strengthen forecasting accountability across business units. Working closely with FVC teams, the Lead Business Analyst helps ensure that forecasting workflows, data inputs, and outputs align with enterprise requirements. The role also supports change management and training to promote system adoption and process consistency. Key Responsibilities + Develops and maintain enterprise-wide forecasting process governance and standards + Acts as the "go-to" resource for forecasting best practices, training, and end-user support + Defines, tracks and reports key forecasting performance metrics and drive continuous improvement + Partners with IT and Kinaxis around system functionality and support of the Kinaxis - Maestro SaaS + Provides day-to-day system administration support for business unit-specific systems, including troubleshooting issues + Collaborates with stakeholders to elicit, document, and prioritize business requirements + Conducts thorough analysis of existing processes and systems to identify areas for improvements + Collects and analyzes data to identify trends, patterns, and insights that can inform business decisions + Ensures business needs are clearly communicated and understood by all stakeholders + Ensures implemented solutions meet business requirements and quality standards + Works closely with cross-functional teams to design and propose effective and efficient data integration and reporting + Monitors industry trends and best practices to identify opportunities for continuous improvement + Serves as business liaison for internal and external audits MINIMUM QUALIFICATIONS:- Bachelor's Degree required- 6 years of industry related experience required PREFERRED QUALIFICATIONS: - 3-5 years of experience in demand planning, forecasting, or process governance (prefer in the energy industry)- Strong understanding of forecasting methodologies and performance metrics - Experience with enterprise planning or forecasting systems As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Findlay, Ohio Additional locations: Job Requisition ID: 00020086 Location Address: 539 S Main St Education: Bachelors (Required) Employee Group: Full time Employee Subgroup: Regular Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here (*********************************************************************************************************************************** . If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at *************************************** . Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at ************************* .The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role. About Marathon Petroleum Corporation Marathon Petroleum Corporation (MPC) is a leading, integrated, downstream energy company headquartered in Findlay, Ohio. The company operates the nation's largest refining system. MPC's marketing system includes branded locations across the United States, including Marathon brand retail outlets. MPC also owns the general partner and majority limited partner interest in MPLX LP, a midstream company that owns and operates gathering, processing, and fractionation assets, as well as crude oil and light product transportation and logistics infrastructure.

:Requisition Number: 28152 When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation's premier propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customer...

Title: Senior Plant Project Engineer Duration: Permanent Must have: Bachelor's Degree in an Engineering field (Mechanical, Industrial, Chemical preferred) Experienced planning, executing, and monitoring small to medium-sized ($5,000-$5M+) projects from conception through to completion. Chemical, Industrial, Combustion, Heating, or Cooling background Construction and safety-oriented AutoCAD experience creating high-level drawings Nice to have: Experienced with Incineration or Hazardous Waste Treatment, Storage and Disposal Facilities (TSDFs) Experience with safety and environmental compliance as related to chemical operations Day to day: We are looking for a talented Plant Project Engineer to join our team at Ross Incineration Services. This person will be planning, executing, and monitoring projects pertaining to the addition or replacement of tanks, pumps, air pollution control equipment, buildings, and other infrastructure. A successful candidate will be hands-on and be heavily involved throughout the course of the projects working closely with operations, maintenance, and contractors. The current team consists of 5 engineers of various disciplines and this role will report directly to the Engineering Technology Manager. This role will also be involved in safety and compliance, including the Mandatory Safety and Incentive Program initiatives, EHS Policy and Procedures, etc.

Summary : The Electrical Design Intern supports the development and integration of electrical systems used in Airstream recreational and commercial vehicles. This role contributes to projects spanning energy management, system monitoring, entertainment, data networks, user interfaces, and related subsystems. Interns will gain hands-on experience taking concepts through design, validation, and implementation while working alongside experienced engineers and cross-functional design teams. Supervisory Responsibilities : None Essential Duties and Responsibilities include the following . Other duties may be assigned. All associates of Airstream are required to know and adhere to the policies and procedures which pertain to his/her position. 1. Participate in activities associated with the layout, design, specification, documentation, testing, & implementation of vehicle electrical systems including the development of schematics, layouts, construction drawings, and installation aids using Autodesk Inventor software. 2. Review, understand, and work with other vehicle mechanical systems and Design Teams to ensure that Electrical Systems integrate and perform according to design intent with a high level of design quality, performance, and ease of manufacture. 3. Assist with the implementation of electrical systems into Production including the training of Production line Associates as needed. 4. Research warranty, customer service, and operations feedback related to electrical systems to identify opportunities for improvement in current or future designs. 5. Work closely with codes and compliance team to validate testing requirements for new product implementations 6. Review product designs and highlight those areas that are critical to quality relating to life safety, electrical, and mechanical What You Can Expect to Learn • Hands-on experience with real product development cycles. • Exposure to engineering reviews, testing processes, and cross-functional collaboration. • Understanding of manufacturing processes, quality systems, and design-for-assembly principles. • Experience working with a premium brand known for craftsmanship and innovation. Education and/or Experience : Pursuing a Bachelor's degree in Electrical Engineering (preferred: 3rd or 4th year; strong 2nd-year candidates considered). Skills/Qualifications: 1. Proven ability to manage multiple assignments and tasks (at different stages), set priorities, and adapt to changing conditions and work assignments. 2. Strong computer skills including proven experience in use of 3D Computer Modeling software (Autodesk Inventor preferred) and in the creation of related documentation 3. Proven experience in the proper use of common lab & measurement equipment used for the evaluation of electrical systems and circuitry 4. Ability to find solutions to problems using creativity, reasoning, and past experiences along with the available information and resources. 5. Must have the ability to assess a situation, seek multiple perspectives, and gather data to implement sustainable solutions. 6. Good communication, analytical, & time management skills and an ability to work in a focused environment, delivering high quality results on time and on budget 7. Proven experience in electrical system design, implementation, troubleshooting & repair, or another related electrical field a plus. Position Details Location: Onsite at Jackson Center, Ohio Duration: Summer Internship Schedule: 40 hours per week Relocation assistance: Not provided

Purple Land Management (PLM) is one of the fastest-growing privately held companies in North Texas. PLM serves clients such as energy producers, midstream operators, state and local agencies, engineering firms and mobile service providers in lease negotiation and acquisition, right-of-way acquisition, title services and project management. PLM has ten office locations across the country, with the headquarters located in downtown Fort Worth. Job Description A GIS Analyst at Purple Land Management must possess a thorough understanding of the ESRI ArcGIS Suite and be able to use that knowledge to generate and organize GIS Data. The GIS Analyst must be able to analyze and review title documents, including oil and gas leases, real property deeds, easements, rights-of-way, and other instruments and determine where they are situated and whether or not they impact a client's real property. A GIS Analyst must also be able to establish leasehold boundaries against changing surveys, water lines, vegetation, and historical maps, and compare the boundaries against historical production data to determine whether a parcel of real property is validly leased by a producing oil or gas well (determine HBP status). Responsibilities Support land services projects as assigned by the Senior GIS Analyst by developing and implementing GIS solutions, building maps, comparing historical mapping and survey data against present day tax parcel identification numbers, deed plotting leasehold, and determining HBP status of oil and gas producing properties Build, organize, maintain and manage all of PLM's client and organizational databases including confidential data Assist District Landmen and Project Managers with the preparation of updates and presentation of data from title research and lease acquisitions Review title documents including real property legal descriptions to assess real property boundaries Build complex KMZ file or equivalent to provide satellite imagery based work product that allows a client to properly navigate a leasehold or acreage position Qualifications Bachelor's Degree in GIS is strongly preferred Two years or more experience using GIS in an oil and gas context preferred Proficient in Microsoft Office, specifically Excel, and cloud computing generally Highest proficiency in ArcGIS required Self-starter and self-motivated with strong organizational and reasoning skills IT experience or proficiency working with computer hardware and software maintenance (preferred) Additional Information All your information will be kept confidential according to EEO guidelines.

TETRA Technologies, Inc. is a global organization whose foundation and strength comes from the drive and dedication of our team members. We value equal employment opportunity to stimulate creativity and innovation in our workforce as we use our collective talents to develop unique solutions to address the world's energy challenges. Founded in 1981, TETRA (NYSE: TTI) is an energy services and solutions company focused on developing environmentally conscious services and solutions that help make people's lives better. With operations on six continents, the Company's portfolio consists of Energy Services, Industrial Chemicals, and Critical Minerals. In addition to providing products and services to the oil and gas industry and calcium chloride for diverse applications, TETRA is expanding into the low-carbon energy market with chemistry expertise, key mineral acreage, and global infrastructure, helping to meet the demand for sustainable energy in the twenty-first century. Visit the Company's website at **************** for more information or connect with us on LinkedIn. Essential Duties: Hiring for all positions from Trainee to Sr. Operators Under general supervision, maintains and oversees all Frac Water Services equipment during the rigging up to ensure they are working properly and safely, and according to the specific requirements of the customer * Determines equipment and best method to rig up according to the package selected by the customer * With the assistance of other Operators unloads and assembles the equipment to be used, sets up the service unit and initiates the rig up * Ensure drains and air reliefs are installed in proper places * Operate transfer pumps * Monitor water levels in frac tanks * Operate discharge manifolds * Safely handle hoses of various sizes (3", 4", 6", & 8") * Operate filtration units * Is familiar with correct procedures and performs basic routine equipment maintenance in preparation for next job * Cleans and checks tools and equipment * Performs routine readings of equipment during rigging up to ensure equipment is performing according to customers' requirements while always maintaining a safe operation * When needed, moves equipment around yard with forklifts, help load and unload trucks day and night, make hotshot and parts runs, sweep and mop shop and yard * Complies with Company safety policies and procedures * Initiates Job Safety Analysis safety procedures prior to the rig up and safety meeting/tailgate meetings * Identify corrects obvious hazards immediately or report to Field Supervisor if not immediately correctable to gain assistance * Attends in-house and/or outside training seminars to acquire basic knowledge of OSHA and Company safety programs and policies * Interpret documents such as safety rules, operating and maintenance manuals, and procedure manuals * Ability to write routine reports and correspondence * Ability to speak and effectively present information in one-on-one and small group situation to customers and other employees of the organization Requirements: * EDUCATION: High School Diploma or General Education Degree (GED) * LICENSES / CERTIFICATIONS: Valid Driver's License * TRAVEL: 75% depending on job site * OTHER: * Submit to and satisfactorily complete pre-employment background, medical, alcohol, and drug screening * Must possess a valid Driver's License * Able and willing to work a rotating shift schedule that includes nights, weekends, holidays, and occasional overtime (if applicable) * Able and willing to work in inclement weather, climb structures, perform work at heights, and in enclosed spaces * Able and willing to work both independently in remote locations and in a team environment Physical Duties: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, see, talk, and hear. The employee is frequently required to walk and to use their hands to use, handle and control equipment. The employee is occasionally required to reach, climb, and balance. The employee must regularly lift and/or move up to 25-50 pounds and occasionally lift and/or move up to 100 pounds with appropriate assistance. Work Environment: The requirements are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position. While performing the duties of any field-based position, an employee may be exposed to various outside weather conditions including but not limited to rain, humidity, snow, and/or heat during daytime hours and/or nighttime hours. The noise level in this work environment is usually moderate to loud for extended periods of time.

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, American Heart Association, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning 11,000 strong organization as we fuel the world and each other! Position Scope: Planner/Scheduler position is responsible for the effective execution of all maintenance work control processes. This position works directly with the Technical/Maintenance/Operations Manager(s) & Technicians to ensure efficient and effective use of SAP-Plant Maintenance to plan and schedule resources to conduct maintenance activities which result in minimum downtime and maximum productivity. The Planner/Scheduler is empowered to manage Compliance and Preventative Maintenance work, develop weekly technician schedules, define parts and materials, if necessary, define crafts and skills and engage the proper resources to manage and close out all Corrective Work Orders of the District. Utilizes SAP Plant Maintenance system (a maintenance work order system) to review, prioritize and schedule maintenance work; negotiates down time with operations to accommodate required maintenance activities. Appropriates materials for maintenance activities, coordinates scheduling of critical inspections for compliance with all pertinent regulatory agencies. In addition, the Planner/Scheduler provides the equipment-related expertise and technical guidance on improving Preventive Maintenance activities. The Planner/Scheduler position can be based in either the Inkster, MI Office - Great Lakes District or in the Akron, OH District Office. Duties and Responsibilities Once a valid work request is submitted, the Planner/Scheduler will prioritize, plan, schedule, and follow-up on accuracy of the job plan for all planned (DOT, PM and Corrective) work. Their focus is not day to day but is to be proactive and optimize workforce productivity and minimize downtime by managing work 1 week or more in advance. In performance of these duties the planner/scheduler has the following responsibilities: * Principal contact, and liaison between the maintenance department and operations planning. They ensure the area, department, or facility in which they are assigned receive professional maintenance service in a timely manner to ensure high equipment availability and performance. * Review all planned work request from assigned area and determine validity and accuracy of information and engage the appropriate resources to set a preliminary priority. * Reviews work request for accuracy and clarity: clear scope of work, realistic completion date, proper lead times, correct equipment identification, proper charge number (if applicable), proper authorization, and discuss details with originator of the work order. * Works with Project Managers and Engineering Firms to acquire and load new Functional Locations and Equipment into SAP. * Escalates issues to the Technical Supervisor for work which is high priority and or compliance related. * Approach all aspect of the work being performed with safety as the highest priority. * Manage the status of work control and backlog for work order submission to work order completion. Status may include waiting for planning, waiting parts, ready to schedule, scheduled, etc. * Verifies all material, information, tools, and labor are available prior to scheduling. * Works with Maintenance leads, supervisors, and planners to determine resource availability and work to level the work force. * Develops a preliminary workforce schedule by technician ensuring all skills (Operator Qualifications) requirement and resource availability is met. * Actively participate in scheduling meeting with operation partners to finalize priority of work orders, minimize downtime windows, and necessary lead times. * Finalize the Maintenance resource schedule based on agreed plan with production. * Follow up and communicates schedule to all resources: maintenance, production, outside services, stores, and engineering. * Manage the completion of Work Order back log. * Keep accurate metrics on the performance of planning and scheduling functions and provide timely reports to our customers and Preventative Maintenance Manager. * Creation and submission of DOT, PM, and Corrective Work Order Backlog Reports to all District management on a weekly basis Essential Requirements: Experience, Educational & Special Training Required * The Associate Specialist/Analyst level requires a Bachelor's degree or equivalent experience, and 0-6 years of relevant work experience. * The Specialist/Analyst level requires a Bachelor's degree or equivalent experience, and 6+ years of relevant work experience. * The Senior Specialist/Analyst level requires a Bachelor's degree or equivalent experience, and 8+ years of relevant work experience. Preferred Skills: * Associate or bachelor's degree & 5+ years SAP Plant Maintenance Experience. * Preferred experience in SAP Plant Maintenance. * Mechanical/electrical background is necessary. Apprenticeship program or technical school background is desirable. * Solid computer skills. - Excel, Word, Power point, etc. Special Characteristics/Job Requirements: * N/A Working Conditions: * The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Usually, normal office working conditions. * Must be able to remain in a stationary position 50% of the time due to prolonged periods of sitting or standing. * Occasional overnight travel may be required.

Job DescriptionPrincipal Finance Analyst- Corporate The Prinipal Finance Analyst distills technical analysis of the current financial climate and trends in financial performance into reports and recommendations for how the business operates. By gathering, analyzing, preparing and summarizing recommendations based on financial analysis, he/she will be critical in advisement of business moves such as acquisitions, operational forecasting and other financial plans. Our growth is contingent on finding new avenues to stretch; being well-informed on the financial environment allows us to measure the risk and move forward. Making an impact isn't something reserved for people in corner offices. Here, it comes from people in every corner of the office. People with ambition, optimism and courage. We provide growth and opportunity and give employees flexibility in how they get the job done. You might not expect that from a big company, but we're smart enough to know how to hire the best and when to step aside and let them lead. Our goal is that you never stop learning and you never cease to amaze--especially yourself. If this fits your career goal, we can't wait to welcome you on board.Responsibilities Develops, interprets and implements financial concepts for financial planning and control. Performs technical analysis to determine present and future financial performance. Gathers, analyzes, prepares and summarizes recommendations for financial plans, acquisition activity, trended future requirements and operating forecasts. Performs economic research and studies in the areas of rates of return, depreciations, working capital requirements, investment opportunities, investment performance and impact of governmental requirements. As a seasoned, experienced professional with a full understanding of area of specialization, he/she resolves a wide range of issues in creative ways. Ability to draw on past experience and current data to influence business partners and provide insightful analytics. Works on problems of diverse scope where analysis of data requires evaluation of identifiable factors. Demonstrates good judgment in selecting methods and techniques for obtaining solutions. Networks with senior internal and external personnel in own area of expertise. Possesses a higher level of data analysis skills and knowledge of planning & forecasting. Ability to work in cross functional teams and work more independently. Qualifications Advanced degree in finance and relevant experience in planning & forecasting/budgeting required. Requires a minimum of 8-12 years of experience and a Master's degree preferred. All the above duties and responsibilities are essential job functions for which reasonable accommodation will be made. All job requirements listed indicate the minimum level of knowledge, skills and/or ability deemed necessary to perform the job proficiently. This position description is not to be construed as an exhaustive statement of duties, responsibilities or requirements. Employees may be required to perform any other job-related instructions as requested by their leader, subject to reasonable accommodation.

Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: The position's purpose is to bill customers as quickly and as accurately as possible after receiving all the required documentation. Primary Duties /Responsibilities: Engage with the Technical Customer Advisor to understand when a job has been carried out. Match manifest with original job request in RPM. Confirm this with the Technical Customer Advisor. Escalate to Technical Customer Advisor for speedy resolution in the event of issues. Create and issue the invoice. Respond to any billing queries (that would first come through the Customer Technical Advisor). Qualifications Education / Experience / Background: Invoicing and/ or other financial experience Experience of using computer invoicing systems or similar Sufficient understanding of waste streams, transportation and disposal or the ability to build this understanding High School Diploma Knowledge / Skills / Abilities: Very numerate High attention to detail Very organized and efficient Knowledge of, or ability to build knowledge of, the hazardous waste business Able to work collaboratively across different functions and to secure help from colleagues Additional Information Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

SUMMARY: The Director of Revenue Cycle Services is responsible for the overall strategic leadership and operational management of Preferred Management's network of hospitals revenue cycle functions. This role oversees all areas from patient access to final payment, ensuring accuracy, compliance, and efficiency. The Director drives system-wide performance improvement, leads a high-performing team, and partners with clinical, administrative leaders, and the Home Office team to maximize reimbursement, reduce denials, and support the financial stability of all hospitals in the Preferred Management network. ESSENTIAL DUTIES AND RESPONSIBILITIES: Provide strategic leadership for all hospitals' revenue cycle functions, including Patient Access, HIM, Charge Capture, Coding, Billing, Denials Management, and Collections. Oversee and optimize Meditech system workflows within revenue cycle modules to improve accuracy, efficiency, and reporting. Develop, implement, and monitor key performance indicators (KPIs) such as AR days, DNFB, denial rates, clean claim rates, and cash collections. Ensure timely and accurate submission of all claims, both governmental and commercial, while minimizing rejections and denials. Lead initiatives to reduce denials through improved documentation, coding accuracy, and payer communication. Maintain a compliant and accurate Charge Description Master (CDM) and support correct charge capture across all departments. Collaborate with clinical leaders to support accurate documentation and alignment with regulatory and compliance requirements. Direct the implementation of revenue cycle policies, procedures, and best practices to ensure consistency and operational excellence. Partner with Compliance and HIM to ensure adherence to CMS guidelines, HIPAA regulations, and all applicable billing and documentation laws. Analyze payer trends, reimbursement issues, and claim disputes to identify root causes and drive corrective action plans. Prepare and present regular financial and operational reports to executive leadership, identifying risks, opportunities, and strategic recommendations. Oversee vendor relationships, including clearinghouses, collection agencies, consulting partners, and revenue cycle technology providers. Lead, mentor, and evaluate revenue cycle leadership and staff, fostering a culture of accountability, teamwork, and high performance. Coordinate training programs to ensure staff competency in Meditech workflows, billing rules, compliance requirements, and revenue cycle processes. Support month-end closing by ensuring timely charge posting, reconciliation, cash balancing, and reporting accuracy. Conduct audits of revenue cycle processes to identify errors, inconsistencies, and opportunities for improvement. Work with IT and Meditech teams to enhance reporting tools, automate processes, and improve system capabilities. Serve as the primary escalation point for complex billing, payer, or patient financial issues requiring senior-level intervention. Lead cross-departmental projects aimed at improving the financial health of the organization and optimizing revenue capture. Stay current on changes in healthcare regulations, payer guidelines, coding updates, and industry best practices. Overnight travel to Preferred Management hospitals to assist with training, workflow processes, compliance, and reimbursement. SUPERVISORY RESPONSIBILITIES Directly supervise revenue cycle leadership and management staff, including hiring, training, coaching, and performance evaluation. Provide mentorship and professional development opportunities for staff to enhance team performance. Establish clear goals, expectations, and performance metrics for all revenue cycle departments. Promote a culture of accountability, teamwork, and continuous improvement. Manage workflow assignments, staffing schedules, and department resources to meet operational objectives. Conduct disciplinary actions when necessary, in compliance with hospital policies and regulations. Requirements QUALIFICATIONS: Extensive knowledge of hospital revenue cycle operations, including patient access, insurance verification, coding, billing, charge capture, denials management, and collections. In-depth understanding of Meditech Expanse and Business & Clinical Analytics (BCA) revenue cycle modules, workflows, reporting functions, system optimization, and data extraction. Strong knowledge of Charge Description Master (CDM), ICD-10, CPT, and HCPCS coding guidelines and how they impact reimbursement. Comprehensive understanding of payer rules and reimbursement methodologies, including Medicare, Medicaid, commercial payers, managed care plans, and value-based arrangements. Knowledge of federal and state healthcare regulations, including CMS billing guidelines, HIPAA, EMTALA, and compliance standards involved in revenue cycle operations. Familiarity with charge capture processes, including documentation requirements and regulatory billing compliance. Strong understanding of clinical documentation integrity (CDI) and its impact on coding, quality scores, and reimbursement. Knowledge of contract management, payer agreements, claim adjudication processes, and appeal strategies. Proficiency with revenue cycle analytics, KPI monitoring, and financial reporting, including AR days, DNFB, denial rates, cash flow, and reimbursement trends. Knowledge of customer service standards related to patient financial communications, billing inquiries, and resolution processes. EDUCATION and/or EXPERIENCE: Bachelor's degree in Business Administration, Healthcare Administration, Finance, or related field preferred. In lieu of a Bachelor's degree, at least 10 years experience working in a hospital Revenue Cycle setting is preferred. Minimum 5 years of progressive management experience in a hospital Revenue Cycle setting. Experience with Meditech Expanse preferred; experience with Electronic Health Records systems and analytic tools required LANGUAGE/READING SKILLS: Strong verbal communication skills to clearly present financial and operational information to executive leadership, staff, and external stakeholders. Ability to write policies, procedures, reports, and correspondence in a clear and professional manner. Skilled in delivering presentations, training sessions, and workshops for diverse audiences. Ability to effectively communicate complex financial concepts in understandable terms. Ability to foster collaborative relationships across departments and with external partners. MATHEMATICAL SKILLS: Ability to analyze financial data, revenue cycle metrics, and statistical reports to identify trends and variances. Proficiency in calculating percentages, ratios, and complex financial formulas related to reimbursement, AR aging, and cash flow. Strong skills in interpreting and forecasting revenue, budget performance, and financial outcomes. Ability to perform calculations related to payer reimbursement methodologies, contractual allowances, and expected payments. Competence in analyzing large data sets and converting numbers into actionable insights. Ability to calculate productivity standards, staffing ratios, and workload metrics for revenue cycle departments. Skilled in comparing financial results against benchmarks, targets, and prior performance. Capability to develop and interpret dashboards, KPIs, pivot tables, and other quantitative reports. Strong understanding of statistical concepts used in performance improvement and root-cause analysis. Ability to prepare financial models that support decision-making, planning, and revenue cycle strategy. REASONING ABILITY: Ability to analyze complex revenue cycle problems and identify root causes. Skilled at evaluating multiple options and determining the most effective solution for operational and financial issues. Capable of interpreting regulations, policies, and payer requirements to make informed decisions. Ability to apply critical thinking to identify trends in data and develop actionable strategies. Skilled at forecasting outcomes and anticipating challenges in revenue cycle operations. Ability to integrate financial, operational, and clinical information to support strategic planning. WORK ENVIRONMENT: Employee is regularly required to stand, walk, sit, ascend and descend stairs, possess ability to handle, finger or feel objects, tools or controls; reach with hands and arms. Employee must frequently be able to lift 25 pounds from the floor to waist level. Specific vision abilities include close vision and the ability to clearly focus vision.

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, The American Red Cross, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning 12,000 strong organization as we fuel the world and each other! Summary: Station Operators are responsible for all activity within assigned facilities with emphasis placed on safety, security, and efficient operations. The Station Operator controls all aspects of inbound/outbound movements, product storage, and assists/performs equipment maintenance and repairs. Job activities also include compliance with operating procedures, constant monitoring of product movement equipment, and record keeping for code compliance, leak detection and inventory. Essential Duties & Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: * Under general supervision of Station/Terminal Supervisor is engaged in operating Station/Terminal equipment in connection with receiving, storing, transferring, delivering petroleum, and maintaining related records. * Personally, is engaged in the inspection and operation of mainline pumps, handling principal contacts and planning, guiding, coordinating with operations to meet operating requirements and prevent material contamination. * Coordinates product movement with Dispatching Department and shippers. Makes visual checks of meters, gauges, and pump station equipment. * Performs quality control, identifies product changes as required. * Performs utility notification duties during off peak hours and weekends as required. * Assigned to a 12-hr. rotating shift. Subject to shift hold over or shift reassignment. Follows a Primary relief schedule during off hours and is subject to call out at all hours * Responsible for safety, security, and efficient operation of product movement at Pipeline facilities * Maintain maintenance requirements to maximize equipment availability and reliability * Support equipment installation and repairs, perform general day-to-day activities, make notifications/schedule/perform required maintenance activities, and maintain related code compliance on equipment * Maintain Operator Qualifications to operate assets/equipment, monitor flow, pressure, inventory, metering, etc. as needed to achieve desired operating conditions * Read and perform routine equipment checks * Perform regulatory required inspections of facility, environment, and equipment * Comply with all Partnership and regulatory required procedures * Read and understand flow, piping and instrumentation drawings and schematics * Participate in facility project planning to maximize operational efficiency * Ability to work in a 24/7 operational environment which could include shift rotations, nights, weekends, holidays, etc. * Able to support existing call-out/on-call requirements and adapt to meet additional Partnership needs as required Special Considerations: * Must reside within 45 miles of reporting location. The described job duties are a framework in which work will be assigned. This description is not inclusive of all responsibilities or job assignments. This position will require extended off-hour duties at times. Required education or minimum level: * High School Diploma or GED Required Qualifications: * Must have strong commitment to safety * Capable of compliance with Partnership and regulatory policies * Team oriented, self-motivated and flexible * Must have a valid driver's license and safe driving habits * Capable of self-directed work, planning, and organization * Excellent written and verbal communication skills with the ability to work effectively in a group environment Preferred Qualifications: * Previous work background in related industrial environment * Petroleum measurement experience such as metering, proving, hand lining, and BS&W verification * Proficiency with computers including HMI, SAP, MS Office applications such as Excel and Outlook as well as other computer based work training, time reporting, on-line work applications and documentation Working Conditions and Requirements: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Frequent exposure to heat, cold, and other adverse weather conditions * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and require appropriate personal protective equipment * Work on and around equipment and facilities that require knowledge of and adherence to safe work procedures and practices * Subject to call-outs to respond to operational issues and emergencies after working hours, at night, and on weekends and holidays