Assembler jobs in Albuquerque, NM - 20 jobs

With Staff Management | SMX, you'll get a weekly paycheck, learn new skills, meet new people, and work with a great management team in a clean and safe environment. Looking for a chance to gain valuable experience and potentially land a permanent production role? We're seeking a motivated Assembler to join our growing manufacturing team in Albuquerque, NM! This 3 month temp-to-hire production position offers a pay of $16- $17.50/hour and multiple shift options: 1. **1st Shift:** 6:00am to 2:00pm ($16.00/hr) 2. **2nd Shift:** 2:00pm to 10:00pm ($16.50/hr) 3. **3rd Shift:** 10:00pm to 6:00am ($17.50/hr) Ready to make your move? Send your resume to our RPS Recruiter Noreen at nsingleton@smxstaffing.com for more details! . Perks & Benefits: Weekly paychecks, Direct Deposit or Cash Card pay options, Medical / Dental Insurance. Shifts: 1st Shift, 2nd Shift, 3rd Shift. Employment Types: Temp to Hire. Pay Rate: $16.00 - $17.50 / hour Duties: 1. Review drawings and instructions before each project 2. Assemble each product according to specifications 3. Confirm products meet assembly quality standards 4. Identify, record, and report any product defects 5. Complete required quality and production forms 6. Monitor and maintain necessary assembly inventory 7. Maintain a clean and safe work area 8. Follow all manufacturing quality and safety standards and procedures 9. May require occasional evening and weekend hours . Position Requirements: 1. Please note, we do not offer sponsorship for this role. U.S. Citizens or US Permanent Residency (green card holders) is required. 2. High school diploma or GED 3. Must be a team player, able to work with a diverse team 4. Must be committed to following attendance policy 5. Must be committed to helping the team meet quality and productions goals Requirements: Background Check, Drug Test, Must be at least 18 years old.Able to Lift 50 pounds., required education: HS Diploma or GED. Work Location: ARRAY, Albuquerque, NM 87109. Job Types: Assembly, Manufacturing. Industry: Manufacturing. The hourly rate for this position is anticipated between $16.00 - $17.50 per hour. This range is a good-faith estimate, based on the shift you work and other considerations permitted by law. An employee''s pay history will not be a contributing factor where prohibited by local law. In addition to monetary compensation, we offer medical, dental, vision, life, and more. More details about benefits can be found at https://flimp.live/trueblueassociates#home . SMX, LLC is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, sexual orientation, age, gender identification, protected veteran status, or any other characteristic protected by law. We consider qualified applicants with arrest and conviction records in accordance with applicable law. Accommodations are available on request for candidates taking part in the selection process. If you require disability-related accommodation during the recruitment process, please contact your Recruiter or Employee Relations at HR-Advice@trueblue.com or 1-800-610-8920. TrueBlue, Inc. and its brands will consult with all applicants who request disability-related accommodation during the recruitment process to ensure that the accommodation provided takes into account the applicant's individual accessibility needs.

Arcosa Wind Towers, Inc. is a leading manufacturer of structural wind towers in North America. We focus on excellence, offering premier value to our customers. Arcosa Wind Towers is searching for a Heavy Assembler. As a Heavy Assembler, you'll assemble mechanical units, fabricated parts/components sub-assemblies, assemblies, and complete units using hand tools, power tools, jigs, fixtures, and miscellaneous equipment. The Heavy Assembler will also fit, align, calibrate, and adjust parts and mechanisms to meet tolerances and product operating requirements, and repair units or products that have failed to meet requirements. Location: Belen, NM What you'll do: Assist in the completion of all tasks to meet deadlines Operate mobile equipment Verify torque sequence and values (certified) Perform quality checks to meet customer specifications Read and follow complex instructions Follow all safety rules and practices May be involved in safety committees or initiatives Perform other duties as assigned What You'll Need: 2 years of experience preferred Knowledge of all finished product specifications Must be open to 1st, 2nd and 3rd shift Working Conditions: Work environment includes plant, warehouse, production and non-production areas and plant grounds. This position may require work/maintenance coverage beyond the normal hours, shift, and on weekends/holidays Ability to tolerate both high and low temperatures, loud noises typical of a manufacturing plant Overtime and Overtime on Saturdays, as needed Schedule is subject to change Safety Activities: Be aware of and observe all safety practices. Know and follow all safety rules and procedures. Participate in safety committees and initiatives as assigned. As an important member of the team, you will be responsible for: Activating the potential of our people, Caring for our customers, Optimizing operations and Integrating sustainability into our daily practices as well as our long-term strategy and promote a results-driven culture that is aligned with long term value creation. Safety Sensitive: Yes Benefits: Health & Pharmacy Dental & Vision Critical Illness Flexible Spending Accounts Company Paid Life & AD&D Insurance Voluntary Life & AD&D Insurance 401(k) W/Company Match Short-Term Disability Voluntary Long-Term Disability Employee Assistance Program

Department: Manufacturing Reports To: Department Supervisor Management: No Salary Grade: Hourly Exempt/Non-Exempt: Non-Exempt The Electronics Assembler performs any combination of routine functions to assemble electronic components, subassemblies, products or systems. Responsible for maintaining a safe and clean working environment by complying with all procedures, rules and regulations. This position requires attention to detail and a focus on producing defect-free product for our customers. Primary Duties and Responsibilities: * Performs intermediate assembly tasks such as transformers, resistors, transistors, capacitors, integrated circuits, and sockets, on chassis panel. * Reads work orders, follows production drawings and sample assemblies, and/or receives verbal instructions regarding duties to be performed. * Uses hand tools, power tools machines or other equipment to perform work. * May perform assembly operations under microscope or another magnifying device. * Inspects own work to ensure parts and assemblies meet production specifications and standards. * Conducts quality checks periodically. * Demonstrates accuracy and thoroughness by meeting all productivity and quality objectives. * Communicates with team and support staff to ensure continuous production at high quality levels. * Balances team and individual responsibilities. * Maintain a safe and clean working environment by complying with all IEC procedures, rules and regulations. Certification, Licensures, or Registration required to qualify for this position * Support and maintain all 6S workplace organization standards. Internal Experience: * Please refer to the 'Electronics Assemble Core Functions Addendum' for training and length of service criteria. Skills and Abilities * Good reading comprehension * Attention to detail * Good hand eye coordination * Effectively use computer * Follow written and verbal instructions * Willingness to learn Education & Experience: * High School Diploma or GED Personal Qualities: * Strong work ethic and ability to work in a manufacturing environment. * Works efficiently and manages time effectively. * Can work independently or with a team. * Multi-task. * Able to work flexible hours and overtime as required.

Who we are: AerSale is a global leader and market innovator specializing in aviation products and services to meet the growing demand for aftermarket support in global passenger, cargo, and government segments. Featuring complete aircraft nose-to-tail, value-added offerings, including Aircraft & Component Maintenance, Repair and Overhaul Services (MRO), Aircraft & Engine Sales and Leasing, Used Serviceable Material (USM) Sales and Parts Exchange, Flight Equipment Asset Management Services, Internally developed aircraft and component modifications (engineered solutions) designed to enhance aircraft performance and operating economics (e.g. AerSale, AerTrak and AerAware). For more information, visit us at **************** What we Offer: * Medical Insurance * 100% Employer Paid Dental, Vision, Life, Short and Long Term Disability Insurance * 401K with Employer Contribution * Employee Stock Purchase Plan (ESPP) * Education Reimbursement (related field) * Employee Referral Program and Recognition Program * Paid Holidays and 15 Paid Time-Off Days annually Job Description: Essential Duties and Responsibilities: * Build landing gear assemblies * Read and interpret Maintenance Manuals * Use Precision Tooling * Communicate and work with other departments * Prepare completed assemblies for crating and shipping * Document work performed * Abide by all quality and safety procedures at all times * Follow instructions per the component maintenance manuals(CMM) * Maintain an organized work space * May occasionally be required to work overtime including evenings or weekends as necessary to meet deadlines Education and Experience: * Minimum of two (2) years of previous mechanical maintenance experience. (Preferred: Previous aircraft technicians and those with landing gear experience will be considered first) * High school diploma or an equivalent * Proficient in the English language; writing, reading and speaking * This position is safety sensitive and adheres to DOT drug and alcohol regulations * Must Successfully complete a comprehensive background check Abilities and Skills: * Must be able to lift up to 50 lbs. * Stand for extended periods of time * Attention to detail * Basic arithmetic * Coordination * Critical thinking * Manual dexterity * Arm-hand steadiness * Near vision Position PPE Requirements: * Compliance with safety and health protocols, including the use of personal protective equipment as required. If you would like to see your career take flight, apply today! Aersale is an Equal Opportunity Employer. The company prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, general identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. As a Government Contractor Aersale takes affirmative action to employ and advance in employment individuals without regard to disability or veteran status. If you are an Individual with Disability and require any assistance with the application process please contact Human Resources at: ************************.

Job DescriptionBenefits: Opportunity for advancement 401(k) 401(k) matching Paid time off Wellness resources Reads each assembly procedure and assembles products based on technical drawings. Follows procedures to complete. Ensures that parts are available to build project. Documents the part needs to ensure that all staff know of shortage. Ensures that project is complete timely for Quality Assurance and shipment. Attaches breakers, relays, contactors, bus bars, transformers, insulators, circuit boards, keypads, power supplies, plugging devices, and fuse blocks to mounting holes with bolts and screws. Cuts, strips, bends, and forms wire cable, conduit, pipe, and tubing used to connect circuits and subassemblies. Connects color-coded wires, using mirrors in compact areas. Solders connections and crimps connectors to wire ends. Tests and adjusts electrical assemblies. Each product must be tested, calibrated, and assured to be in complete and working order prior to shipment. By signing off on the QA (Quality and Assurance) report, you are personally assuring that the product is in good working order, that the product is complete, and the product has been completed within company standards, drawings, and compliance. Red lines drawings to ensure accurate assembly for each product. Date and initial changes. Ensures that documentation changes are clear and concise for CAD operator. Discusses changes to ensure that the change will not interfere with product UL, TUV or other certification. Discusses errors in diagrams or production order with supervisor or engineer to clarify assembly problems. Squares, aligns, and assembles bases, enclosure frames, or equipment structural components for milling. Ensures proper alignment. Drills and taps holes in specified locations of enclosures for mounting control units. Drills and taps holes in specified locations of back panels for mounting transformers, din rail for terminal blocks, etc. Must be able to use hole saws, drills, and other power tools, tap and die, soldering iron and other equipment as required. Must be computer literate. Manage inventory ensure stock levels are accurate and long lead items are ordered within timeframe required to maintain. Shipping and Receiving Accurately compares identifying information and counts, weighs, or measures items of incoming and outgoing shipments to verify information against bills of lading, invoices, orders, or other records. Unpacks and examines incoming shipments, rejects damaged items, records shortages, and corresponds with shipper to rectify damages and shortages. Must be organized and pay attention to detail. Assists with container assembly/construction as needed.

Responsibilities Peraton is seeking a JR Assembly Technician to support the Air Force Research Laboratory (AFRL) by improving their rapid-capability delivery process. The team will provide expertise in research and development, systems engineering, mission development, modeling and simulation, as well as ground and flight operations. Their focus will be on both large and small space technology experiments, with a primary goal of integrating sensors and payloads into a government provided satellite bus. What you'll do: Provide space technology assembly and integration support. Support spacecraft bus, payload, and experiment assembly and integration within government facilities. High-altitude balloon, payload, and experiment assembly and integration within government facilities. Assist with hardware/software procurement and other direct costs during assembly and integration. Evaluates reliability of materials, properties and techniques used in production; plans, designs, and develops electronic parts, components, and/or integrated circuitry. Under general direction, designs and develops equipment, processes and systems that involve data networks, communications, and display. Analyzes equipment specifications and process requirements to conceive a practical design. . Coordinates and consults with research engineers or scientists and customer representatives to resolve design problems. Develops and maintains technical procedures, documentation, and manuals. Compiles and analyzes operational data and directs tests to establish standard for new designs or modifications to existing equipment, systems, or processes. Qualifications Required Qualifications: 2+ years of experience with a Bachelors degree; OR Masters degree in a related field; OR 6+ years of experience in lieu of degree Previous experience working with satellite integration, technology assembly, or electronics assembly Local to Albuquerque, New Mexico with the ability to work on-site This position requires the candidate possess a minimum of Top-Secret clearance with the ability to obtain TS/SCI. The candidate must maintain the clearance. Desired Qualifications: Solid communication and collaboration skills Mission success mindset Benefits: Peraton offers enhanced benefits to employees working on this critical National Security program, which include heavily subsidized employee benefits coverage for you and your dependents, 25 days of PTO accrued annually up to a generous PTO cap and eligible to participate in an attractive bonus plan #LI-PY1 Peraton Overview Peraton is a next-generation national security company that drives missions of consequence spanning the globe and extending to the farthest reaches of the galaxy. As the world's leading mission capability integrator and transformative enterprise IT provider, we deliver trusted, highly differentiated solutions and technologies to protect our nation and allies. Peraton operates at the critical nexus between traditional and nontraditional threats across all domains: land, sea, space, air, and cyberspace. The company serves as a valued partner to essential government agencies and supports every branch of the U.S. armed forces. Each day, our employees do the can't be done by solving the most daunting challenges facing our customers. Visit peraton.com to learn how we're keeping people around the world safe and secure. Target Salary Range $66,000 - $106,000. This represents the typical salary range for this position. Salary is determined by various factors, including but not limited to, the scope and responsibilities of the position, the individual's experience, education, knowledge, skills, and competencies, as well as geographic location and business and contract considerations. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. EEO EEO: Equal opportunity employer, including disability and protected veterans, or other characteristics protected by law.

Calgon Carbon | A Kuraray Company is growing-and so can your career. Be part of a global leader in environmental solutions, where your work directly impacts the quality of air and water around the world. Mechanical Assembler I Location: Bloomfield Plant - Bloomfield, NM Excellent Benefits: Medical, dental, prescription & vision, HSA & retirement savings (401k) - Generous Company Match! Perks: Incentives/bonus plans, competitive pay, dress for your day, hybrid schedules, paid time off (vacation starting at 3 weeks), tuition reimbursement, wellness programs, fun events, learning & development opportunities. Hours of work: Full-time position with hours Mondays - Fridays, 9:00 AM - 5:00 PM, 40 Hours/Week Under the supervision of the E&A supervisor or group leader, the technician will perform all functions under this job description. This includes all necessary functions to maintain a clean and safe shop. Complies with all Company and Safety Policies and procedures in the performance of assigned duties. Duties and Responsibilities (not limited to) Comply with company policies Assist with Annual and day to day Perform all general labor functions Sweep floors Empty trash Cut grass/remove snow when needed Load/unload trucks Operate fork truck Operate jib hoist and overhead crane Operate small power tools Operate and maintain all personal safety equipment Assemble all standard products, such as disposorbs, vaporpacs, high flow ventsorbs, etc. Pressure test all assembled units to meet necessary requirements Recondition small returnable units, such as cyclesorbs, bulk bins, etc. Weigh/Load carbon into the small systems as needed. Assist in receiving and verification of quantities of materials and parts delivered to E&A. Read instructions & drawings as necessary for the reconditioning and assembly of standard products. Fabricates lined pipe (PPL and TFE). This includes cutting, threading, assembly, flaring and testing of pipe spools from 1” through 4”. Cuts, threads, and assembles carbon steel pipe, plastic pipe and stainless steel pipe Assists with warehousing duties. Performs layout and assembly on all small equipment such as cyclesorbs, bulk bins, vapor paks and high flow ventsorbs (and fan skids). Maintain CCC's service equipment. This includes dual modules, mobile adsorbers, filters, etc. Review of system when returned from customers, preparation of list(s) of required repairs and parts, performance of repairs to the mechanical parts of the systems as well as localized (spot) lining/painting repairs Pickup parts and or make small equipment deliveries Assemble piping, hydro static-testing Qualifications Less than high school education is required High school diploma or general education degree (GED) is preferred 0-2 years General labor is required Industrial labor experience is preferred About Calgon Carbon At Calgon Carbon, we are scientific innovators with a proud legacy of over 80 years and more than 205 patents to our name. Since pioneering the first activated carbon products from bituminous coal in the 1940s, we've been at the forefront of developing cutting-edge technologies and solutions to meet the world's evolving air and water purification needs. Today, our portfolio includes more than 700 direct market applications across a wide range of industries. Headquartered in Pittsburgh, Pennsylvania, Calgon Carbon employs approximately 1,685 professionals and operates 20 facilities worldwide dedicated to manufacturing, reactivation, innovation, and equipment fabrication. In Europe, we operate under the name Chemviron. In March 2018, Calgon Carbon became part of the Kuraray Group. Together, we offer complementary products and services, united by a shared commitment to delivering the highest quality and most innovative activated carbon solutions to customers around the globe. Calgon Carbon is an Equal Opportunity Employer, including disabled/veteran

Are You a Hands-On Problem Solver? Imagine a job where you get paid based on the quality and speed of your work, with no cap on your earnings. You're the go-to person when it comes to assembling bikes, grills, furniture, or any other product. You love working independently, have an entrepreneurial mindset, and want to be in control of how much you earn. If that sounds like you, we want to talk! Why Join Us? At National Assemblers, Inc., you'll have the unique opportunity to operate like your own business while benefiting from the stability of a W-2 position. You can take charge of your earnings based on how much you assemble - the more you build, the more you earn! Unlimited Earning Potential*: Get paid per piece - the more you assemble, the more you earn! Weekly Pay: Consistent payments every week. Flexible Work Schedules: Full-time, part-time, and weekend-only opportunities. Independence & Autonomy: Work independently, set your pace, and enjoy the freedom of self-direction. Training & Certification: Start strong with our comprehensive training program, even if you have no prior experience. Mileage Reimbursement: Get reimbursed for travel to job sites. Comprehensive Benefits: Medical, Dental, Vision insurance, and 401K eligibility. Travel Opportunities: Experience different places as you work at various locations. What You'll Do: Assemble bikes, grills, furniture, and a variety of products with precision and craftsmanship. Use your reliable transportation to reach designated retail locations. Build a reputation for excellence by delivering exceptional service and ensuring 100% customer satisfaction. Who We Are: National Assemblers, Inc. is the world's largest retail assembly company, assembling over 10 million products annually. We're proud to have been named "Assembly Company of the Year," thanks to our talented technicians who bring their passion and skill to every project. With partners like Walmart and Wayfair, we've established trust with leading brands and countless customers across the country. What You Bring: A passion for hands-on work and problem-solving. A strong mechanical aptitude. Ability to lift 40 pounds. Your own reliable transportation and basic hand tools. An entrepreneurial mindset with a desire to control your income. Commitment to quality, customer satisfaction, and representing our brand with care. Ready to Earn What You're Worth? Join National Assemblers, Inc., where you control your potential and your future. Apply today and start building a career where your hard work pays off! * Compensation Disclosure: Employees will be paid based on a piece-rate system or at the local minimum wage, whichever is higher. Equal Opportunity Employer: National Assemblers, Inc. is an equal opportunity employer and does not discriminate against qualified applicants on the basis of race, color, creed, religion, ancestry, age, sex, marital status, national origin, sexual orientation, disability or handicap, veteran status, or any state and local protected status.

Material Handler - Pallet Assembler Classification: Hourly, Non-Exempt Department: LETEM Recycling ABQ Reports to: Department Supervisor Summary/Objective The Material Handler position main function is to repair wooden pallets to desired specs. Essential Functions Utilizing a nail gun to assemble wooden components to create wooden pallet. Detects and reports defective materials or questionable conditions using a crowbar and handsaw. Maintains the work area and equipment in a clean orderly condition and follows prescribed safety regulations. Must be able to perform but not limited to the following tasks: Able to lift 50 lbs. Able to work standing on your feet for 8+ hours a day Able and willing to work in an outdoor environment. Able to bend and lift for 8+ hours a day. Must be willing to accept and receive frequent directives. As with all positions at LETEM Recycling, this position requires emphasis on quality and safety. This position also allows for cross-training and future growth. LETEM Recycling is a very fast-paced operation, and we pride ourselves on our clean and safe environment. WE OFFER: ¨ Health care benefit package (medical, dental, and vision) ¨ Vacation Program ¨ 6 Paid Holidays Note: The responsibilities and tasks outlined in this document are not exhaustive and may change as determined by the needs of the company.

and is located in Hobbs, NM. Day Shift Shift Hours: 7am-7pm Job Summary: Performs a wide variety of tasks to assemble and test all Cactus or customer products. Essential Functions, Roles, and Responsibilities: Essential duties and responsibilities include the following. * Practice safe work habits and comply with all quality, safety, health and environmental policies, procedures, programs and regulations * Must complete Short Service Employee (SSE) program for the position, to familiarize with Cactus requirements and specifications * Inspect, operate and test completed products to verify functioning and conformance to requirements * Position and/or align components for assembly, manually or using hoists * Verify parts clearances and fit up * Adjust, repair, rework or replace parts and assemblies to eliminate malfunctions and to ensure proper operation * Read and interpret assembly drawings or operation manuals * Maintain and lubricate parts or components * Remove rough spots and smooth surfaces to fit, trim or clean parts, use of hand tools or power tools * Perform other regular duties as assigned or requested Education, Training, Experience: High School diploma or general education degree (GED); or a minimum of 0-2 years related experience and/or training; or equivalent combination of education and experience. Certifications, Licenses, Registrations: None required. Job Knowledge, Skills, Abilities: * Ability to read and understand detailed instruction drawings and specifications on wellhead equipment and valves. Knowledge of good document control and process flow, knowledge of how parts are assembled tested and painted and the tools and equipment used to accomplish it. * Knowledge of Quality System Supervisory Responsibilities: This job has no supervisory responsibilities. This position operates in an industrial/field environment. The role requires working in and around manufacturing equipment, heavy machinery, and potentially hazardous materials. While performing the duties of this job, the employee: Physical Requirements: * Must be able to lift/move up to 50 pounds regularly * Stand and walk for extended periods (up to 12 hours per shift) * Climb stairs and ladders * Bend, stoop, kneel, and reach * Work in confined spaces when required * Operate heavy equipment and power tools * Perform repetitive movements Environmental Conditions: * Exposure to extreme weather conditions * Exposure to loud noise levels requiring hearing protection * Work in high places and confined spaces * Exposure to dust, fumes, and chemicals * Work around moving mechanical parts * Work in hot and cold temperatures Safety Requirements: * Wear required Personal Protective Equipment (PPE) * Follow all safety protocols and procedures * Participate in regular safety training * Complete required safety certifications * Comply with all environmental regulations Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position may require: * Pre-employment drug screening * Background checks * Medical examinations * Safety certifications * Valid driver's license * Ability to wear personal protective equipment (PPE) * Working in various weather conditions * Travel to remote locations Cactus Companies maintains a drug-free workplace and participates in E-Verify. Disclaimer: This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee for this position. Duties, responsibilities, and activities may change at any time with or without notice. Cactus Companies is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, veteran status, genetic information, or any other characteristic protected by law. Safety is our top priority. All employees must comply with our comprehensive safety programs, participate in required safety training, and demonstrate commitment to our safety-first culture.

The Production Home Assembler follows work orders and instructions in order to accurately and efficiently prepare and assemble building components and homes in a factory assembly line environment. Essential Duties and responsibilities: Operate various hand tools, power tools and equipment used to complete carpentry duties including: Circular Saw Table Saw Router Pneumatic Nail Gun (roofing, framing and finish work) Drills And other tools needed for measuring, cutting, fastening, and drilling Frame, layout and build floors Prepare, layout and build walls Layout, run and install electrical lines, switches, receptacles and panels/breaker boxes Install and prepare dry for finish tape, mud and texture Complete roof construction, decking, flashing and shingling Cabinet and or finish carpentry and trim, build and installation Installation of siding, windows and doors Painting of interior and exterior of homes Cooperate and promote a team concept with all other company employees Adhere to all rules and regulations, at all times Meet or exceed company safety standards Perform other tasks as assigned by management Minimum Qualifications: Must be at least 18 years of age Must be legally authorized to work in the United States Be able to read, write, and speak English High School diploma, preferred Knowledge, Skills and Abilities: Ability to read a tape measure Possess basic construction knowledge and comfortable using basic tools Excellent attention to detail Ability to read blueprints, a plus Ability to work in a fast-paced environment and multi-task Ability to trouble shoot and problem solve in a high-volume Versatility and willingness to transfer into various departments when necessary You must be able to communicate efficiently and clearly with other Team Members Working conditions: Continuous exposure to heat, cold, noise, and working outdoors. Must wear protective equipment while at the location Physical requirements: Requires walking, sitting, lifting, pushing, pulling and climbing to a significant degree Heavy Work-Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds or force frequently, and/or up to 10 pounds of force constantly to move objects While performing the duties of this job, the employee is regularly required to talk and hear, in order to communicate to employees as well as function safely around construction equipment Disclaimer: “This is intended to provide general information about the position. It is not an employment contract. As with all positions, the responsibilities and duties of this position may change. The company, in its discretion, may alter this job description at any time with or without notice.” EEO/AA Statement: Cavco Industries Inc., and all of its Subsidiaries are an EEO/AA (equal opportunity/affirmative action) institution and does not discriminate on the basis of sex, age, race, color, religion, physical or mental disability, creed, national origin, veteran status, sexual orientation, genetic information, gender identity, or gender expression in the programs or activities which it operates.

The Production Home Assembler follows work orders and instructions in order to accurately and efficiently prepare and assemble building components and homes in a factory assembly line environment. Essential Duties and responsibilities: Operate various hand tools, power tools and equipment used to complete carpentry duties including: Circular Saw Table Saw Router Pneumatic Nail Gun (roofing, framing and finish work) Drills And other tools needed for measuring, cutting, fastening, and drilling Frame, layout and build floors Prepare, layout and build walls Layout, run and install electrical lines, switches, receptacles and panels/breaker boxes Install and prepare dry for finish tape, mud and texture Complete roof construction, decking, flashing and shingling Cabinet and or finish carpentry and trim, build and installation Installation of siding, windows and doors Painting of interior and exterior of homes Cooperate and promote a team concept with all other company employees Adhere to all rules and regulations, at all times Meet or exceed company safety standards Perform other tasks as assigned by management Minimum Qualifications: Must be at least 18 years of age Must be legally authorized to work in the United States Be able to read, write, and speak English High School diploma, preferred Knowledge, Skills and Abilities: Ability to read a tape measure Possess basic construction knowledge and comfortable using basic tools Excellent attention to detail Ability to read blueprints, a plus Ability to work in a fast-paced environment and multi-task Ability to trouble shoot and problem solve in a high-volume Versatility and willingness to transfer into various departments when necessary You must be able to communicate efficiently and clearly with other Team Members Working conditions: Continuous exposure to heat, cold, noise, and working outdoors. Must wear protective equipment while at the location Physical requirements: Requires walking, sitting, lifting, pushing, pulling and climbing to a significant degree Heavy Work-Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds or force frequently, and/or up to 10 pounds of force constantly to move objects While performing the duties of this job, the employee is regularly required to talk and hear, in order to communicate to employees as well as function safely around construction equipment Disclaimer: “This is intended to provide general information about the position. It is not an employment contract. As with all positions, the responsibilities and duties of this position may change. The company, in its discretion, may alter this job description at any time with or without notice.” EEO/AA Statement: Cavco Industries Inc., and all of its Subsidiaries are an EEO/AA (equal opportunity/affirmative action) institution and does not discriminate on the basis of sex, age, race, color, religion, physical or mental disability, creed, national origin, veteran status, sexual orientation, genetic information, gender identity, or gender expression in the programs or activities which it operates.

Field Service Technician III Nationally Recognized Experts Specialized in Transformer and Substation Apparatus Installation, Services, and Repair. At NASS, we provide the broadest set of one-stop substation service capabilities in the country-from turnkey upgrades and asset assemblies to major repairs and testing. Including transformers and breakers, switches, arresters, and apparatus testing, to comprehensive substation inspection programs, protection and control commissioning and repairs, and control cabinet engineering. We care about our employees and offer a generous benefits package including: Competitive pay Nashville Training Academy & Comprehensive Training Resources Career Path Planning Incentives for Professional Certifications Competitive Per Diem Referral Bonuses Tuition Reimbursement Medical, vision, and dental benefits 401k with company match Compensation: The hourly rate for this position is between $32.00 - $46.00 per hour. Factors which may affect starting pay within this range may include geography/market, skills, education, experience, and other qualifications of the successful candidate. Job Purpose: The Field Service Technician III as a key member of our field service team is responsible for assisting in the assembly, installation, maintenance, and repair of transformers and other related equipment. Maintaining safety is the top priority. This role requires assistant with training and mentoring less experienced technicians. This position requires working outdoors in all weather conditions. Occasionally work is performed near moving mechanical parts, at heights, hazardous places and is occasionally exposed to wet and/or humid conditions, temperature extremes, fumes, traffic, potential electrical shock hazards, noise pollution, and vibration. Responsibilities Leader in Safety Culture. Adhere to all company safety policies and procedures, including the use of personal protection equipment (PPE). Participate in safety training programs and meetings. Perform basic testing as a crew lead on transformer installation, maintenance and emergency work. Ability to install, test and maintain electrical apparatus including transformer theory of operation knowledge. Skilled in troubleshooting, problem solving during inspections and apparatus testing. Understand the theory behind and reason for testing with the ability to analyze results. Creating plans for testing apparatus. Thorough knowledge as a practical operator of the oil vacuum processing rig and top off transformers. Administrative duties as assigned (inspections, job brief, and work order system). Clear communication internal and external. Calisto and other monitoring installations & commissioning. Qualifications Required: Must have 5 or more years of industry experience. High School diploma or GED. Supplemental courses in electrical maintenance are desired. Must possess a current and valid driver's license, and be able to maintain a good driving record. Must be able to crawl, climb, stand and lift up to 50 lbs. with or without reasonable accommodations. Must be able to pass a fit for duty exam. Must be available for regular overnight domestic travel and occasional international travel. Must be willing to work flexible hours and overtime, and occasional weekends, holidays and nights. Able and willing to travel up to 75% as needed. Preferred: Commercial Driver's License (CDL) NCCO Crane Certification Some knowledge of the fundamentals and principles of mechanical preferred. Knowledge of the hazards and safety precautions required in working in a power distribution facility preferred. Ability to learn to read and interpret electrical diagrams and prints. Ability to learn to read and interpret a variety of power generation and distribution metering and recording devices. Ability to learn the practices and procedures of the industry. Ability to follow oral and written directions. NASS is an equal opportunity employer and gives consideration for employment to all qualified applicants regardless of race, color, religion, disability, sex (including pregnancy, gender identity and sexual orientation), political affiliation, military service, national origin, age or any other characteristics protected by state or federal laws. Voltyx does not work with individual recruiters or third party recruiting agencies, and will not recognize claim to any unsolicited resumes or candidate information. #WEEMPOWERPOSSIBLE

US LBM is one of the leading and fastest growing distributors of specialty building materials in the United States, with a team of over 15,000 employees located throughout the country. Since our founding in 2009, we have acquired over 70 companies and have expanded to more than 500 locations serving 37 states. US LBM is a progressive organization that promotes a unique culture that focuses on the value of its customers and associates. Developing our people is critical to our strategy and fostering our culture of empowerment. . A Brief Overview The Door Assembler I is responsible for assembling pre-hung door components. This person will stock lumber, plates and other work-related materials and supplies, and will also band/stack finished products. Pay Rate: $15.00-$17.00/hr. What you will do Work on a pre-hung door assembly line. Stock doors, frames, plates and stock components for door assembly. Assemble components under the direction of the line leaders. Load and band finished materials on carts/pallets inside and/or outside. Receive incoming products, commodities, and materials. Maintain work area by keeping it neat and organized. Assist in the set-up of component assembly process. Monitor production workflow process assisting other areas as needed. Operate all equipment necessary to the assembly process. Adhere to established safety rules and regulations and follows all safety procedures; maintain a safe environment. Comply with Company's attendance policy by maintaining regular and predictable attendance. Assist in maintaining an organized work environment which may include emptying trash receptacles and keeping all bays/staging areas clean and organized. Provide excellent customer service and participate in a positive work environment. Monitor inventory as required by location management. Retain an awareness of the work environment critical to the task at hand to produce error free and damage free results. Participate in and complete assigned trainings. Other duties as assigned by Management. Required For All Jobs Perform other duties as assigned. Comply with all policies and standards. Adheres to Company's commitment to workplace safety. Education Qualifications High School or equivalent work experience required. Experience Qualifications Prior carpentry experience preferred. Skills and Abilities Must be able to read a tape measure and use a hammer. Ability to learn to operate equipment such as routers, saws, presses, and staple guns. Available for overtime as needed. Additional Potential Opportunities based on experience: Door Assembler II Door Assembly Lead . US LBM Holdings, LLC, is an equal-opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.

Department: Manufacturing Reports To: Department Supervisor Management: No Salary Grade: Hourly Exempt/Non-Exempt: Non-Exempt The Electronics Assembler performs any combination of routine functions to assemble electronic components, subassemblies, products or systems. Responsible for maintaining a safe and clean working environment by complying with all procedures, rules and regulations. This position requires attention to detail and a focus on producing defect-free product for our customers. Primary Duties and Responsibilities: Performs intermediate assembly tasks such as transformers, resistors, transistors, capacitors, integrated circuits, and sockets, on chassis panel. Reads work orders, follows production drawings and sample assemblies, and/or receives verbal instructions regarding duties to be performed. Uses hand tools, power tools machines or other equipment to perform work. May perform assembly operations under microscope or another magnifying device. Inspects own work to ensure parts and assemblies meet production specifications and standards. Conducts quality checks periodically. Demonstrates accuracy and thoroughness by meeting all productivity and quality objectives. Communicates with team and support staff to ensure continuous production at high quality levels. Balances team and individual responsibilities. Maintain a safe and clean working environment by complying with all IEC procedures, rules and regulations. Certification, Licensures, or Registration required to qualify for this position Support and maintain all 6S workplace organization standards. Internal Experience: Please refer to the ‘Electronics Assemble Core Functions Addendum' for training and length of service criteria. Skills and Abilities Good reading comprehension Attention to detail Good hand eye coordination Effectively use computer Follow written and verbal instructions Willingness to learn Education & Experience: High School Diploma or GED Personal Qualities: Strong work ethic and ability to work in a manufacturing environment. Works efficiently and manages time effectively. Can work independently or with a team. Multi-task. Able to work flexible hours and overtime as required.

Who we are: AerSale is a global leader and market innovator specializing in aviation products and services to meet the growing demand for aftermarket support in global passenger, cargo, and government segments. Featuring complete aircraft nose-to-tail, value-added offerings, including Aircraft & Component Maintenance, Repair and Overhaul Services (MRO), Aircraft & Engine Sales and Leasing, Used Serviceable Material (USM) Sales and Parts Exchange, Flight Equipment Asset Management Services, Internally developed aircraft and component modifications (engineered solutions) designed to enhance aircraft performance and operating economics (e.g. AerSale, AerTrak and AerAware). For more information, visit us at **************** What we Offer: * Medical Insurance * 100% Employer Paid Dental, Vision, Life, Short and Long Term Disability Insurance * 401K with Employer Contribution * Employee Stock Purchase Plan (ESPP) * Education Reimbursement (related field) * Employee Referral Program and Recognition Program * Paid Holidays and 15 Paid Time-Off Days annually Job Description: Essential Duties and Responsibilities: * Install bushings and assemble subcomponents to facilitate the buildup process * Utilize various measuring equipment such as calipers, micrometers and bore gauges * Perform minor repairs * Follow instructions per the component maintenance manuals (CMM) * Document work performed * Maintain an organized workspace * May occasionally be required to work overtime including evenings or weekends as necessary to meet deadlines Education and Experience: * Must have at least two (2) years of experience working with calipers, bore gauges and micrometers * Minimum of two (2) years of previous mechanical maintenance experience. (Preferred: Previous aircraft technician) * High school diploma or an equivalent * Proficient in the English language; writing, reading and speaking Physical Requirements: * Must be able to lift up to 50 lbs. * Stand for extended periods of time * Attention to detail * Basic arithmetic * Coordination * Critical thinking * Manual dexterity * Arm-hand steadiness * Near vision Position PPE Requirements: * Compliance with safety and health protocols including the use of personal protective equipment as required. Other Requirements: * This position is safety sensitive and adheres to DOT drug and alcohol regulations * Must Successfully complete a comprehensive background check If you would like to see your career take flight, apply today! Aersale is an Equal Opportunity Employer. The company prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, general identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. As a Government Contractor Aersale takes affirmative action to employ and advance in employment individuals without regard to disability or veteran status. If you are an Individual with Disability and require any assistance with the application process please contact Human Resources at: ************************.

Responsibilities Peraton is seeking an Assembly Technician to support the Air Force Research Laboratory (AFRL) by improving their rapid-capability delivery process. The team will provide expertise in research and development, systems engineering, mission development, modeling and simulation, as well as ground and flight operations. Their focus will be on both large and small space technology experiments, with a primary goal of integrating sensors and payloads into a government provided satellite bus. What you'll do: Provide space technology assembly and integration support. Support spacecraft bus, payload, and experiment assembly and integration within government facilities. High-altitude balloon, payload, and experiment assembly and integration within government facilities. Assist with hardware/software procurement and other direct costs during assembly and integration. Evaluates reliability of materials, properties and techniques used in production; plans, designs, and develops electronic parts, components, and/or integrated circuitry. Under general direction, designs and develops equipment, processes and systems that involve data networks, communications, and display. Analyzes equipment specifications and process requirements to conceive a practical design. . Coordinates and consults with research engineers or scientists and customer representatives to resolve design problems. Develops and maintains technical procedures, documentation, and manuals. Compiles and analyzes operational data and directs tests to establish standard for new designs or modifications to existing equipment, systems, or processes. Qualifications Required Qualifications: 5+ years of experience with a Bachelors degree; OR 3+ years of experience with a Masters degree; OR 9+ years of experience in lieu of degree Proven experience in assembly, integration, and testing of complex systems, ideally within aerospace or defense sectors Experience with satellite systems or space payloads, including components such as sensors, payloads, and communication systems Familiarity with electronic systems integration, including wiring, cabling, and power systems Hands-on experience with mechanical and electrical assembly processes within a government or controlled environment Ability to read and interpret blueprints, schematics, and technical drawings Familiarity with electronic systems integration, including wiring, cabling, and power systems Local to Albuquerque, New Mexico with the ability to work on-site This position requires the candidate possess a minimum of Top-Secret clearance with the ability to obtain TS/SCI. The candidate must maintain the clearance. Desired Qualifications: Solid communication and collaboration skills Mission success mindset Benefits: Peraton offers enhanced benefits to employees working on this critical National Security program, which include heavily subsidized employee benefits coverage for you and your dependents, 25 days of PTO accrued annually up to a generous PTO cap and eligible to participate in an attractive bonus plan #LI-PY1 Peraton Overview Peraton is a next-generation national security company that drives missions of consequence spanning the globe and extending to the farthest reaches of the galaxy. As the world's leading mission capability integrator and transformative enterprise IT provider, we deliver trusted, highly differentiated solutions and technologies to protect our nation and allies. Peraton operates at the critical nexus between traditional and nontraditional threats across all domains: land, sea, space, air, and cyberspace. The company serves as a valued partner to essential government agencies and supports every branch of the U.S. armed forces. Each day, our employees do the can't be done by solving the most daunting challenges facing our customers. Visit peraton.com to learn how we're keeping people around the world safe and secure. Target Salary Range $86,000 - $138,000. This represents the typical salary range for this position. Salary is determined by various factors, including but not limited to, the scope and responsibilities of the position, the individual's experience, education, knowledge, skills, and competencies, as well as geographic location and business and contract considerations. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. EEO EEO: Equal opportunity employer, including disability and protected veterans, or other characteristics protected by law.

Who we are: AerSale is a global leader and market innovator specializing in aviation products and services to meet the growing demand for aftermarket support in global passenger, cargo, and government segments. Featuring complete aircraft nose-to-tail, value-added offerings, including Aircraft & Component Maintenance, Repair and Overhaul Services (MRO), Aircraft & Engine Sales and Leasing, Used Serviceable Material (USM) Sales and Parts Exchange, Flight Equipment Asset Management Services, Internally developed aircraft and component modifications (engineered solutions) designed to enhance aircraft performance and operating economics (e.g. AerSale , AerTrak and AerAware). For more information, visit us at **************** What we Offer: • Medical Insurance • 100% Employer Paid Dental, Vision, Life, Short and Long Term Disability Insurance • 401K with Employer Contribution • Employee Stock Purchase Plan (ESPP) • Education Reimbursement (related field) • Employee Referral Program and Recognition Program • Paid Holidays and 15 Paid Time-Off Days annually Job Description: Essential Duties and Responsibilities: - Build landing gear assemblies- Read and interpret Maintenance Manuals- Use Precision Tooling- Communicate and work with other departments- Prepare completed assemblies for crating and shipping- Document work performed- Abide by all quality and safety procedures at all times- Follow instructions per the component maintenance manuals(CMM)- Maintain an organized work space- May occasionally be required to work overtime including evenings or weekends as necessary to meet deadlines Education and Experience:- Minimum of two (2) years of previous mechanical maintenance experience. (Preferred: Previous aircraft technicians and those with landing gear experience will be considered first)- High school diploma or an equivalent- Proficient in the English language; writing, reading and speaking- This position is safety sensitive and adheres to DOT drug and alcohol regulations- Must Successfully complete a comprehensive background check Abilities and Skills:- Must be able to lift up to 50 lbs.- Stand for extended periods of time- Attention to detail- Basic arithmetic- Coordination- Critical thinking- Manual dexterity- Arm-hand steadiness- Near vision Position PPE Requirements: • Compliance with safety and health protocols, including the use of personal protective equipment as required. If you would like to see your career take flight, apply today! Aersale is an Equal Opportunity Employer. The company prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, general identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. As a Government Contractor Aersale takes affirmative action to employ and advance in employment individuals without regard to disability or veteran status. If you are an Individual with Disability and require any assistance with the application process please contact Human Resources at: ************************.

Who we are: AerSale is a global leader and market innovator specializing in aviation products and services to meet the growing demand for aftermarket support in global passenger, cargo, and government segments. Featuring complete aircraft nose-to-tail, value-added offerings, including Aircraft & Component Maintenance, Repair and Overhaul Services (MRO), Aircraft & Engine Sales and Leasing, Used Serviceable Material (USM) Sales and Parts Exchange, Flight Equipment Asset Management Services, Internally developed aircraft and component modifications (engineered solutions) designed to enhance aircraft performance and operating economics (e.g. AerSale , AerTrak and AerAware). For more information, visit us at **************** What we Offer: • Medical Insurance • 100% Employer Paid Dental, Vision, Life, Short and Long Term Disability Insurance • 401K with Employer Contribution • Employee Stock Purchase Plan (ESPP) • Education Reimbursement (related field) • Employee Referral Program and Recognition Program • Paid Holidays and 15 Paid Time-Off Days annually Job Description: Essential Duties and Responsibilities:• Install bushings and assemble subcomponents to facilitate the buildup process• Utilize various measuring equipment such as calipers, micrometers and bore gauges• Perform minor repairs• Follow instructions per the component maintenance manuals (CMM)• Document work performed• Maintain an organized workspace• May occasionally be required to work overtime including evenings or weekends as necessary to meet deadlines Education and Experience:• Must have at least two (2) years of experience working with calipers, bore gauges and micrometers• Minimum of two (2) years of previous mechanical maintenance experience. (Preferred: Previous aircraft technician)• High school diploma or an equivalent• Proficient in the English language; writing, reading and speaking Physical Requirements:• Must be able to lift up to 50 lbs.• Stand for extended periods of time• Attention to detail• Basic arithmetic• Coordination• Critical thinking• Manual dexterity• Arm-hand steadiness• Near vision Position PPE Requirements: • Compliance with safety and health protocols including the use of personal protective equipment as required.Other Requirements:• This position is safety sensitive and adheres to DOT drug and alcohol regulations• Must Successfully complete a comprehensive background check If you would like to see your career take flight, apply today! Aersale is an Equal Opportunity Employer. The company prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, general identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. As a Government Contractor Aersale takes affirmative action to employ and advance in employment individuals without regard to disability or veteran status. If you are an Individual with Disability and require any assistance with the application process please contact Human Resources at: ************************.