Assembler jobs in Bristol, CT - 141 jobs

Performs a wide variety of production duties including, but not limited to, assembly, wiring, and inspection of residential heating products following standards, practices, and procedures. Essential Duties and Responsibilities: Assembles and packs required components to produce a variety of heating systems Inspects assembled components and systems for overall quality, proper appearance, and conformance to requirements Identifies and records specific products for further production requirements Reports any defective materials, components, off-quality finishes, and unusual situations to supervisor Operates and maintains lift and platform trucks to move materials and products Utilizes and maintains hand and air tools, electrical and air testing equipment, rivet guns, carton staplers, utility knives, tape measures, and other necessary production tools Packages items and/or products to complete shipments as required Assures counts and condition of materials and items and notes discrepancies Delivers goods and items to appropriate party or to designated area Monitors and maintains safe work areas and reports any unsafe equipment, materials, or practices to supervisor Performs similar or related duties as requested or required

Job DescriptionSalary: $20 Westaff is Hiring for 1st and 2nd Shift Assembly Leads in Farmington, CT! 1st shift:Monday - Friday, 7:00am - 3:30pm 2nd shift:Monday - Friday, 3:30pm - 12:00am Pay Rate:$20-$22 an hour, depending on experience and shift The Header Assembler is responsible for setting up and operating a variety of power and manual equipment to manufacture standard and custom door package headers and moldings. This position requires strong attention to detail, precision, and a commitment to producing high-quality products that meet exact specifications. Assembly Lead Responsibilities: Set up, operate, and adjust power and manual equipment, including power presses, arbor presses, milling machines, drilling machines, cut-off saws, routers, and dies. Perform manufacturing operations such as blanking, slotting, punching, piercing, and drilling. Read and interpret blueprints, specifications, sketches, and special instructions to ensure accurate production. Maintain and modify equipment setups to accommodate changes in size, style, or specifications. Inspect work periodically to ensure quality standards are met and make adjustments as needed. Lubricate, clean, and maintain equipment and dies to ensure safe and efficient operation. Complete finishing tasks such as testing, adjusting, and packing parts for shipment. Maintain a clean, organized, and safe work area in accordance with company standards. Assembly Lead Qualifications: Previous experience operating power and manual equipment in a manufacturing or production environment. Ability to read and interpret blueprints and technical specifications. Strong attention to detail and commitment to quality workmanship. Effective communication skills and ability to work well in a team environment. Ability to stand for extended periods and lift up to 50 pounds. Willingness and ability to adapt to new processes, equipment, and technologies. Apply today for Immediate consideration! Military and Veterans are Encouraged to Apply! Westaff offers Assembly Leads free online classes, weekly pay, medical, vision, and dental

Assembler Pay Range: $23-25 1st Shift: MON - FRI 6:30am to 3:00pm 2nd Shift: MON - FRI 3:00pm to 11:30pm. The Company - Work with an American owned International Manufacturer started over 150 years ago who is the World Leader in its industry. SUMMARY: The main function of an assembler is work as part of a team having responsibility for assembling an entire product or component of a product. JOB RESPONSIBILITIES: * Rotate through all the tasks required in a particular production process. * Determine work assignments and procedures. * Shovel and sweep work areas. * Provide assistance in the production of Wiring Assemblies. SKILLS: * Needed 4-5 yrs of Assembly experience doing: electromechanical assembly, electrical assembly or mechanical assembly, wiring assembly or general assembly. * Verbal and written communication skills, analytical and problem solving ability. * Team player and detail oriented. * Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. * Knowledge of relevant equipment, policies, procedures, and strategies to promote effective local, state, or national security operations for the protection of people, data, property, and institutions. EDUCATION / EXPERIENCE: * High school diploma or GED required. * Required - 5 years experience in assembly, manufacturing or production OTHER REQUIREMENTS: * Open to US Citizens and US Permanent Residents * Pass a criminal background check & drug test * Be at work on time every day scheduled * Work Overtime as needed Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices. Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at accommodations@butler.com.

Hamilton Connections is looking for candidates to fill 1st shift openings in Farmington, CT. Shift: 7am - 3:30pm Monday - Friday Weekly Pay $18/hour + Requirements: -Mechanical aptitude -Use of computers, pallet jacks, measuring devices, and basic tools with up to 50 pounds of torque Commitment to Safety:-Safety glasses, Lifting belts, and Gloves are provided. -Steel toed shoes required

Job Details Position Type: Full time, 40h/week. OT as business needs dictate FLSA Classification : Non- exempt (hourly) Salary Range: $16.50/ hour paid weekly . The actual pay range will depend on varying circumstances and individualized factors, such as job-related knowledge, skills, experience, and other objective business considerations. Reports to : Production Manager Company description: Roto North America is a subsidiary of Roto Window and Door Technology, a global leader in window and door hardware, with 15 production plants and more than 30 subsidiaries worldwide. Through its 2 companies, Roto Frank of America, Inc. and Roto Fasco Canada, Inc., Roto North America has been manufacturing and offering a variety of leading North American and European window and door hardware products in the USA and Canada. To learn more about Roto Frank of America please visit us at: Welcome - Roto North America Summary: The Assembler will assemble manufactured products and pack according to specifications. Essential Functions: Accountable for daily assembly in Production Tasks: Assembles metal products according to directions. Reads blueprints or similar documentation then builds to those specifications. Uses various machines and hand tools to accomplish assigned tasks. Maintains logs, records, and reports concerning production, machine maintenance, and product inconsistencies. Inventories tools, parts, and supplies; contacts materials handler if supplies are needed. Periodically checks products per company policy to ensure quality and uniform completion; resolves any identified problems and alerts supervisor. Observe all safety requirements. Setup and operate a rivet machine. Package finished goods. Maintain required efficiency rates. Able to work with limited supervision. Capable of clipping lock bars both manually and automated. Sorting and packaging injection molding parts. Maintain a clean and neat work environment. Employee must show up to work on time and be able to work overtime as needed. Performs other related duties as assigned. Assumes responsibility without supervision, self-motivated and proactive Demonstrated ability to offer sound and relevant input, and to contribute and defend ideas during meetings and discussions Minimum Required Education: High school diploma or equivalent required. Required Work Experience: 0-1 Year of Manufacturing experience Work environment and Physical Requirements: Working conditions are based in a manufacturing setting. To perform this job successfully the individual must be able to stand and/or sit for prolonged periods of time. Must be able to traverse production facility and climb ladders. Must be able to lift and or move up to 50 pounds at a time. Must have manual dexterity in order to assemble products or machines as directed. Perform repetitive tasks throughout the entire shift. Must have excellent hand-eye coordination. Must wear gloves and safety glasses. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Benefits: Roto offers an attractive salary and benefits package: 401(k) 401(k) matching Employee assistance program Employee discount program Medical insurance Dental insurance Vision insurance Flexible spending account Health savings account Life insurance Short Term Disability insurance Voluntary Long Term Disability insurance Paid time off Paid Holidays

Assembler This position is responsible for inserting coil windings into stators, rotors, and armatures, ensuring high-quality assembly in accordance with technical specifications. The Assembler is crucial to support the production of motors designed to endure exposure to combat, rigorous shock, and saltwater for decades of use. The Assembler uses finesse, strength, and focus to ensure each motor is built to accommodate the severe duty requirements of the U.S. Navy fleet. Key Responsibilities: Inspect stators, rotors, or armatures for defects such as bent laminations, burrs, or unclear slots. Review traveler documents for connection diagrams, winding types, span, inserts, and coil groupings. Install slot liners and insert coils based on the correct span, following all required steps for coil insertion and grouping. Shape coils using a forming fixture (press or mallet) and verify with templates. Solder coil leads using a solder pot, ladles, hand soldering iron, or for smaller gauges, brazing. Apply non-adhesive insulation tape and install additional sleeves, silicone, and moisture blockers. Perform similar coil insertion and shaping tasks for rotors and armatures, ensuring correct slot alignment. Weld coil wires to the commutator using TIG on larger rotors. Install temporary arbors to support and rotate the unit during coil insertion. Inspect work at each stage, ensuring coils meet specifications and are ready for testing or further processing. Label coil wires and ensure the stator is sent for testing once complete. Ensure the finished product meets all specifications before progressing to the next station. General Duties Perform additional tasks as assigned, including support with setup, maintenance, and troubleshooting as needed. Resolve most issues encountered during the job, seeking assistance from leaders for more complex problems. Interpret basic drawings and traveler documents, seeking assistance from leaders for complex or new jobs. Participate in continuous improvement initiatives. Cross train in the Winding Department as required. Maintain a clean work area, free of scrap materials. Adhere to all safety guidelines and company policies. Requirements High school diploma preferred, or equivalent experience. Experience in a manufacturing environment preferred. Able to perform routine math and use measuring tools and gauges. Ability to stand for extended periods, with some tasks also performed seated. Must be able to lift up to 50 pounds, with overhead cranes available for support. This specification is intended to indicate the kinds of tasks and levels of work difficulty that will be required of positions that will be given this title and shall not be construed as declaring what the specific duties and responsibilities of any particular position shall be. It is not intended to limit or in any way modify the right of any supervisor to assign, direct, and control the work of employees under his/her supervision. Ability to competently perform all the essential duties of the position, with or without reasonable accommodation, demonstrated commitment to effective customer service delivery, and the ability to work productively as a member of a team or work group are basic requirements of all positions at the Company.

Full-time Description Summary/Objective The Assembler is responsible for performing a variety of manufacturing processes to convert raw materials into finished products including soldering, punching, potting, trimming, inspection, testing, measuring, wire stripping, cutting, laminating, bonding, baking, crimping, etc. The Assembler follows directions from lead people and supervisors, follows bluebird instructions and general best practices to manufacture high quality products, to specification and on-time. Reasonable Accommodations To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Essential Functions Read and understand all written work instructions (bluebird). Verify kitted raw materials (quantity and proper items). Follow direction from Lead Operator / Supervisor. Learn and execute all required steps of the build process including soldering, punching, potting, trimming, inspection, testing, measuring, wire stripping, cutting, laminating, bonding, baking, crimping, etc. Maintain proper identification / labeling of parts through all process steps. Work cooperatively with other departments such as Marking and QC. Follow all company policies and all safety guidelines. Determine the difference of a good/bad heater, circuit, and wire wound panel. Inspect his or her own work to make sure it is acceptable to the requirements and description of the product. Average eyesight is necessary. Clean raw materials and finished parts using cleaning solutions (such as Isopropyl Alcohol and/or water), air hoses, and cloths. Pick heater pads to expose area to solder/weld. Prepare PSA (pressure sensitive adhesive) application and the bladder press for PSA. Tape heaters on boards for potting/conformal coating. Cover leads-potting, conformal coating, under cover with patches, or doghouse. String heaters and terminate leads with copper crimps. Operate Spartanics and die clicker machines. Cut required materials Keep work area clean and organized: sweep, mop, wipe, and put items in proper place. Competencies Oral Communication - Ability to communicate clearly in English. Communication - Ability to read English, especially detailed work instructions. Math skills: Must be proficient in basic mathematics: addition, subtraction, multiplication and division. Blueprint Literacy - Ability to read and interpret schematic drawings, diagrams, blueprints, specifications, work orders, and reports in order to determine and follow materials requirements and assembly instructions. Teamwork - Ability to cooperate and communicate professionally with supervisors, VSC's, working leaders, coworkers and all other Birk employees. Flexibility - Must be flexible and be able to adapt to changes throughout a workday. Accountability - Ability to accept responsibility and account for his/her actions. Accuracy - Ability to perform work accurately and thoroughly. Applied Learning - Ability to participate in needed learning activities in a way that makes the most of the learning experience. Detail Oriented - Ability to pay attention to the minute details of a project or task. Organized - Possessing the trait of being organized or following a systematic method of performing a task. Responsible - Ability to be held accountable or answerable for one's conduct and work. Safety Awareness - Ability to identify and correct conditions that affect employee safety. Honesty / Integrity - Ability to be truthful and be seen as credible in the workplace. Reliability - The trait of being dependable and trustworthy. Time Management - Ability to utilize the available time to organize and complete work within given deadlines. Requirements Must have previous manufacturing experience. Basic Math knowledge. Welding in a manufacturing environment preferred. Must have experience with and have the ability to execute all required steps of the build process including soldering, punching, potting, trimming, inspection, testing, measuring, wire stripping, cutting, laminating, bonding, baking, crimping, etc.

Reports to: Operations Manager Status: FLSA Non-Exempt (hourly) Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty in a satisfactory manner. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Sensor & Harness Assembler: * Under the direction of the Production Supervisor and/or area lead, performs bench-type electromechanical assemblies and sub-assemblies, using small hand tools, and electronic and pneumatic tooling, following established methods and procedures. * Advanced soldering skillset required. * Detect and report defective materials or questionable conditions to the department supervisor. * Maintains the work area and equipment in a clean and orderly condition and follows prescribed safety regulations. * Must take the necessary precautions to protect yourself and co-workers by using proper safety equipment and guidelines. * Must be able to read and interpret schematics and wiring diagrams * Must be able to read and interpret work instructions, SOPs, and other applicable material * Continuity Checking and Reading * Must be able to push, pull, and lift at least 20 lbs. * Performs prescribed preventative maintenance on machines as required per the P.M. charts. * Participate in Training as required * Uses all appropriate personal protective equipment (PPE), depending upon job task. * Must be a "US Person" as defined by US Govt. and able to work without restriction with ITAR related data Repair Station/MRO Assembler: * Test and calibrate parts. * Accurately read blueprints. * Demonstrate proper use of simple hand and machine tools. * Demonstrate proper use of electrical/mechanical measuring devices. * Accurately read and follow procedures, routing and other work instructions. * Uses all appropriate personal protective equipment (PPE), depending upon job task. * This position may require exposure to information which is subject to US export control regulations, i.e. the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). All applicants must be U.S. persons within the meaning of U.S. regulations. * Responsible for quality. * Meet customer deadlines. * Responsible for building parts that meet customer expectations. Education and Experience: * Minimum of high school education or GED. * Must have two years of progressive experience assembling aerospace components or other smaller manufacturing products requiring moderate technical ability. * Strongly prefer current or prior IPC or JSTD aerospace soldering certification. * Must be able to read and understand English (in writing and verbally). Job Knowledge, Skills and Abilities: * Use and be familiar with all assembly and measuring tools, interpret visual aids, use of basic shop math. * Must be able to perform, but not limited to the following operations necessary to build a flexible cable assembly and/or a rigid T/C assembly: make bulk cable, cut and strip wire, mark, pot, crimp, form and bend, assemble for braze, cap junction, layout, assemble connectors, swage, braid, assemble hardware, coil, x-ray, in-process test and pressure test. * Proficient in use of electrical test equipment and inspection tools. Physical Demands: * Position requires sitting or standing, reaching and moving about the plant. * Must be able to lift up to 20lb, unaided. * Position requires constant use of hands, including grasping, twisting, holding, gripping, or manipulating tools and equipment. * Employees may be subject to random drug and alcohol testing under FAA regulations. Work Environment: * Work performed in a manufacturing environment. * Exposed to any number of elements but with none present to the extent of being disagreeable. * May work at different workstations as production needs require, or shifts from one station to another, during the assembly process This position requires either a US Person (as defined in applicable export regulations) or a non-US Person who is eligible to obtain the required export authorization. To conform to U.S. export control regulations, applicant should be eligible for any required authorizations from the U.S. Government. The above information in this description has been designed to indicate the general nature and level of work performance by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Hourly pay depends on experience and qualification of applicant. HarcoSemco offers: a competitive hourly rate in addition to Medical, Dental, Vision, Basic Life Insurance, 401k and Pad Time Off. For more information on benefits please visit ******************************* HarcoSemco provides equal employment opportunities to all individuals regardless of their race, color, creed, religion, gender, gender identity, age, sexual orientation, national origin, disability, veteran status, pregnancy, or any other characteristic protected by state, federal, or local law. HarcoSemco takes affirmative action to ensure that applicants and employees are treated fairly without regard to any protected characteristics. Discrimination of any type will not be tolerated.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at *********** We're always looking for talented individuals to join our team. Whether you're an experienced manufacturing professional or just starting your career, TTM offers a supportive workplace where all skillsets can thrive. Why Join Us? At TTM, we believe in offering our employees an environment where they can make a real impact on the work we do. Here's a look at what we provide our employees to set them up for success. * Career Development: We invest in your growth - our Operator Advancement Program supports your goals. We provide operators and assemblers at all levels the opportunity to certify their skills and build their career with us up to 3 times a year by applying to the OAP program. TTM promoted 68% of applicants in the program's first year! * Competitive Compensation: We offer a competitive package that reflects your skills and experience along with annual compensation reviews to ensure your growth is aligned with your performance and market trends. * Comprehensive Benefits and PTO: Including health, dental, and vision insurance to keep you at your best. Enjoy 10 paid holidays and 3 weeks of paid time off annually to recharge. TTM strives to invest in our team members at all levels, starting on your first day. To support the growth and development of new hires, this position is eligible for a 90 Day Evaluation that includes a pay increase if key performance indicators are met. Scope: Under limited supervision, this position is responsible for hand soldering, along with set-up and operation of automated soldering machine used in soldering of printed circuit boards. Assignments are semi-routine in nature. Follows verbal and written instructions including blueprints, subassembly layouts. May use hand tools, set up, adjust and operate automatic or semi-automatic machines. Conducts regular preventative machine maintenance. Duties and Responsibilities: * Hand Solder electronic components in through-hole and surface mount technology to Military Standards. * Sets up and operates automated soldering equipment. * Adjusts automated soldering equipment. * Checks circuit boards in process for pin holes, insufficient solder, excess solder and leaners. Adds solder as needed. * Adjusts temperature and pressure controls for proper operation. * Perform specialized testing of products. Technical school training preferred. Good mechanical skills and understanding of basic forms of digital and analog circuitry. * Conducts regular preventative machine maintenance. * Accomplish all job related paperwork in the most accurate, timely and ethical manner. * Communicates regularly to supervisors/managers, suggests procedural changes. * Attends meetings, communicates regularly with managers and supervisors, attends special training, maintains a clean, safe work environment and communicates to supervisors safety hazards and issues. * All other assigned duties as required within the production organization. * Regular attendance is an essential function of this job. Note: The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. Essential Knowledge and Skills: * Demonstrated mechanical/repair skills (intermediate). * Ability to communicate in English language clearly both written and verbal; good interpersonal skills required. * Computer skills: good skills with ability to navigate in a windows environment. * Math skills: ability to perform basic mathematical computations. * Skilled in evaluating test and production data; good problem solving skills. * Must be able to read and understand blueprints. * Willingness and ability to work in a team environment, assist other departments when workloads demand it, and effectively work with all levels of the organization. * Participates in department and/or company-wide improvement initiatives. * Willing and able to be trained to take on additional responsibility. * Willing and able to be trained to work successfully on higher sophisticated/complex machinery safely. * Willing and able to be trained to work successfully with technology specific chemicals safely. * Work up to 10 hours a day, 5 days a week and is flexible to work weekends. Ability to lift up to 30lbs and exercise extreme physical mobility. * Good reading vision. * Ability to pass eye exam with a minimum 20/20 vision that may be corrected via eyeglasses or contact lenses as required. Eye exam is required annually. Note: This job description does not state or imply that these are the only duties/responsibilities to be performed by this Associate. The Associate may be required to perform additional duties within the capability of their skill level. Education and Experience: * High School Diploma or GED Required Experience: * Solder Experience: 1 Year Preferred Experience: * Manufacturing: 1 Year * Technical degree or equivalent experience in an electronics testing environment desired. #LI-KR1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401K, Flexible Spending Account, Health Savings Account, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available 1st of the month following date of hire. Compensation for roles at TTM Technologies varies depending on a wide array of factors including but not limited to the specific office location, role, skill set and level of experience. As required by local law, TTM provides a reasonable range of compensation for roles that my be hired in New York, California and Colorado. For California-based roles, compensation ranges are based upon specific physical locations. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

**Creating Peace of Mind by Pioneering Safety and Security** _At Allegion, we help keep the people you know and love safe and secure where they live, work and visit. With more than 30 brands, 12,000+ employees globally and products sold in 130 countries, we specialize in security around the doorway and beyond. Additionally, in 2024 we were awarded the Gallup Exceptional Workplace Award, which recognizes the most engaged workplace cultures in the world._ **Creating Peace of Mind by Pioneering Safety and Security** _At Allegion, we help keep the people you know and love safe and secure where they live, work and visit. With more than 30 brands, 12,000+ employees globally and products sold in 130 countries, we specialize in security around the doorway and beyond. Additionally, in 2024 we were awarded the Gallup Exceptional Workplace Award, which recognizes the most engaged workplace cultures in the world._ **Job Summary:** The Assembler is responsible for performing a variety of assembly operations to layout and assemble complete door packages. This role requires precision and attention to detail to ensure components are aligned and assembled correctly, maintaining proper tolerances and operational efficiency. **Key Responsibilities:** + Read and interpret blueprints, pictorial prints, and special instructions to assemble door components accurately. + Utilize a range of tools and equipment, including layout trucks, milling machines, drill presses, power presses, fixtures, gauges, and hand tools, to complete assembly tasks. + Align and fit parts on assembly benches, securing them with bolts, nuts, and screws, and make necessary adjustments such as filing and milling foroptimalperformance. + Visually inspect parts before and after assembly toidentifyand set aside any defects. + Layout and assemble sub-assemblies, wash parts, and prepare screw packs as needed. + Perform other miscellaneous duties to complete parts for assembly + Maintain a clean and organized work area, adhering to safety and efficiency standards. **Qualifications:** + High school diploma or equivalent. + Experience with assembly techniques and the use of tools and equipment in a manufacturing setting. + Ability to read and interpret blueprints and assembly instructions. + Strong attention to detail and commitment to quality. + Good communicationskills and the ability to work as part of a team. + Physical ability to stand forlong periodsandlift upto 75 pounds. + Adaptability to new processes and technologies. **Why Work for Us? ** Allegion is a Great Place to Grow your Career if: + You'reseeking a rewarding opportunity that allows you to truly help others. With thousands of employees and customers around the world,there'splenty of room to make an impact. As our values state, "this is your business, run with it". + You'relooking for a company that will invest in your professional development. As we grow, we want you to grow with us. + You want a culture that promotes work-life balance. Our employees enjoygenerouspaid time off, because at Allegion we recognize that you have a full life outside of work! What You'll Get from Us: ⦁ Benefits based on Collective Bargain Agreement **Compensation: ** Panel Assembler rate is $24.52 plus 10% shift differential. **Apply Today!** Join our team of experts today and help us make tomorrow's world a safer place! **We Celebrate Who We Are!** Allegion is committed to building and maintaining a diverse and inclusive workplace. Together, we embrace all differences and similarities among colleagues, as well as the differences and similarities within the relationships that we foster with customers, suppliers and the communities where we live and work. Whatever your background, experience, race, color, national origin, religion, age, gender, gender identity, disability status, sexual orientation, protected veteran status, or any other characteristic protected by law, we will make sure that you have every opportunity to impress us in your application and the opportunity to give your best at work, not because we're required to, but because it's the right thing to do. We are also committed to providing accommodations for persons with disabilities. If for any reason you cannot apply through our career site and require an accommodation or assistance, please contact our Talent Acquisition Team (********************) . © Allegion plc, 2023 | Block D, Iveagh Court, Harcourt Road, Dublin 2, Co. Dublin, Ireland REGISTERED IN IRELAND WITH LIMITED LIABILITY REGISTERED NUMBER 527370 Allegion is an equal opportunity and affirmative action employer (**************************************************************** Privacy Policy **We are Allegion.** A team of experts. United under a common desire; Protect today innovate for tomorrow. And never settle for the status quo. We believe in anticipating opportunities by sharpening our skills and finding new answers through collaboration. We believe in a safer, more secure world. We believe in providing peace of mind. We believe in being true to ourselves and to those who trust-in our protection. We are many. We are one. **We are Allegion.**

Creating Peace of Mind by Pioneering Safety and Security At Allegion, we help keep the people you know and love safe and secure where they live, work and visit. With more than 30 brands, 12,000+ employees globally and products sold in 130 countries, we specialize in security around the doorway and beyond. Additionally, in 2024 we were awarded the Gallup Exceptional Workplace Award, which recognizes the most engaged workplace cultures in the world. Creating Peace of Mind by Pioneering Safety and Security At Allegion, we help keep the people you know and love safe and secure where they live, work and visit. With more than 30 brands, 12,000+ employees globally and products sold in 130 countries, we specialize in security around the doorway and beyond. Additionally, in 2024 we were awarded the Gallup Exceptional Workplace Award, which recognizes the most engaged workplace cultures in the world. Job Summary: The Assembler is responsible for performing a variety of assembly operations to layout and assemble complete door packages. This role requires precision and attention to detail to ensure components are aligned and assembled correctly, maintaining proper tolerances and operational efficiency. Key Responsibilities: * Read and interpret blueprints, pictorial prints, and special instructions to assemble door components accurately. * Utilize a range of tools and equipment, including layout trucks, milling machines, drill presses, power presses, fixtures, gauges, and hand tools, to complete assembly tasks. * Align and fit parts on assembly benches, securing them with bolts, nuts, and screws, and make necessary adjustments such as filing and milling for optimal performance. * Visually inspect parts before and after assembly to identify and set aside any defects. * Layout and assemble sub-assemblies, wash parts, and prepare screw packs as needed. * Perform other miscellaneous duties to complete parts for assembly * Maintain a clean and organized work area, adhering to safety and efficiency standards. Qualifications: * High school diploma or equivalent. * Experience with assembly techniques and the use of tools and equipment in a manufacturing setting. * Ability to read and interpret blueprints and assembly instructions. * Strong attention to detail and commitment to quality. * Good communication skills and the ability to work as part of a team. * Physical ability to stand for long periods and lift up to 75 pounds. * Adaptability to new processes and technologies. Why Work for Us? Allegion is a Great Place to Grow your Career if: * You're seeking a rewarding opportunity that allows you to truly help others. With thousands of employees and customers around the world, there's plenty of room to make an impact. As our values state, "this is your business, run with it". * You're looking for a company that will invest in your professional development. As we grow, we want you to grow with us. * You want a culture that promotes work-life balance. Our employees enjoy generous paid time off, because at Allegion we recognize that you have a full life outside of work! What You'll Get from Us: ⦁ Benefits based on Collective Bargain Agreement Compensation: Panel Assembler rate is $24.52 plus 10% shift differential. Apply Today! Join our team of experts today and help us make tomorrow's world a safer place! We Celebrate Who We Are! Allegion is committed to building and maintaining a diverse and inclusive workplace. Together, we embrace all differences and similarities among colleagues, as well as the differences and similarities within the relationships that we foster with customers, suppliers and the communities where we live and work. Whatever your background, experience, race, color, national origin, religion, age, gender, gender identity, disability status, sexual orientation, protected veteran status, or any other characteristic protected by law, we will make sure that you have every opportunity to impress us in your application and the opportunity to give your best at work, not because we're required to, but because it's the right thing to do. We are also committed to providing accommodations for persons with disabilities. If for any reason you cannot apply through our career site and require an accommodation or assistance, please contact our Talent Acquisition Team. Allegion plc, 2023 | Block D, Iveagh Court, Harcourt Road, Dublin 2, Co. Dublin, Ireland REGISTERED IN IRELAND WITH LIMITED LIABILITY REGISTERED NUMBER 527370 Allegion is an equal opportunity and affirmative action employer Privacy Policy

Are You a Hands-On Problem Solver? Imagine a job where you get paid based on the quality and speed of your work, with no cap on your earnings. You're the go-to person when it comes to assembling bikes, grills, furniture, or any other product. You love working independently, have an entrepreneurial mindset, and want to be in control of how much you earn. If that sounds like you, we want to talk! Why Join Us? At National Assemblers, Inc., you'll have the unique opportunity to operate like your own business while benefiting from the stability of a W-2 position. You can take charge of your earnings based on how much you assemble - the more you build, the more you earn! Unlimited Earning Potential*: Get paid per piece - the more you assemble, the more you earn! Weekly Pay: Consistent payments every week. Flexible Work Schedules: Full-time, part-time, and weekend-only opportunities. Independence & Autonomy: Work independently, set your pace, and enjoy the freedom of self-direction. Training & Certification: Start strong with our comprehensive training program, even if you have no prior experience. Mileage Reimbursement: Get reimbursed for travel to job sites. Comprehensive Benefits: Medical, Dental, Vision insurance, and 401K eligibility. Travel Opportunities: Experience different places as you work at various locations. What You'll Do: Assemble bikes, grills, furniture, and a variety of products with precision and craftsmanship. Use your reliable transportation to reach designated retail locations. Build a reputation for excellence by delivering exceptional service and ensuring 100% customer satisfaction. Who We Are: National Assemblers, Inc. is the world's largest retail assembly company, assembling over 10 million products annually. We're proud to have been named "Assembly Company of the Year," thanks to our talented technicians who bring their passion and skill to every project. With partners like Walmart and Wayfair, we've established trust with leading brands and countless customers across the country. What You Bring: A passion for hands-on work and problem-solving. A strong mechanical aptitude. Ability to lift 40 pounds. Your own reliable transportation and basic hand tools. An entrepreneurial mindset with a desire to control your income. Commitment to quality, customer satisfaction, and representing our brand with care. Ready to Earn What You're Worth? Join National Assemblers, Inc., where you control your potential and your future. Apply today and start building a career where your hard work pays off! * Compensation Disclosure: Employees will be paid based on a piece-rate system or at the local minimum wage, whichever is higher. Equal Opportunity Employer: National Assemblers, Inc. is an equal opportunity employer and does not discriminate against qualified applicants on the basis of race, color, creed, religion, ancestry, age, sex, marital status, national origin, sexual orientation, disability or handicap, veteran status, or any state and local protected status.

FUNCTION: In an assigned area or cell, work with limited supervision to perform the assembly of Production aircraft parts as well as the teardown, and assembly of Overhaul & Repair designated aircraft parts. Performs fitting and assembly operations on various production aircraft parts. Performs teardown and assembly of overhaul & repair aircraft parts. Cleans and applies special adhesives to materials resulting in a permanent bonding of the materials. Sets up and controls furnace temperature in accordance with established specifications. Must be capable of reading and interpreting blueprints, operation sheets, technical specifications and overhaul manuals. Maintains necessary records and files. Works with limited supervision. Assists operators in a lower classification on assembly techniques as needed. Performs temporary part marking, In process transfer marking and final part parking operations using Vibro Engraving, Electro-chemical Etch, Ink Stamp, Dot-Peening, and Paint marking with suitable legibility to meet drawing or customer specification requirements Works under supervision with salary and hourly support groups to address the most complex problems. Must possess a skill level that eliminates errors that cause nonconforming material and maintain a consistent level of high quality work. Identify non-conformances at time of occurrence. Recognize opportunities for non-conformances and notify management of need for action. Actively participate in various aspects of Lean production and Continuous Improvement projects that drive efficiency improvements. Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions. May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.

Performs a wide variety of production duties including, but not limited to, assembly, wiring, and inspection of residential heating products following standards, practices, and procedures. Essential Duties and Responsibilities: * Assembles and packs required components to produce a variety of heating systems * Inspects assembled components and systems for overall quality, proper appearance, and conformance to requirements * Identifies and records specific products for further production requirements * Reports any defective materials, components, off-quality finishes, and unusual situations to supervisor * Operates and maintains lift and platform trucks to move materials and products * Utilizes and maintains hand and air tools, electrical and air testing equipment, rivet guns, carton staplers, utility knives, tape measures, and other necessary production tools * Packages items and/or products to complete shipments as required * Assures counts and condition of materials and items and notes discrepancies * Delivers goods and items to appropriate party or to designated area * Monitors and maintains safe work areas and reports any unsafe equipment, materials, or practices to supervisor * Performs similar or related duties as requested or required * High School Diploma or GED preferred * Prior manufacturing experience a plus * Ability to read, write, and follow both written and verbal work orders * Familiarity with hand and air tools, measuring instruments, packing tools, and palletizing equipment * Ability to operate hoists, hand trucks, and platform trucks as necessary * Ability to lift 50 pounds unassisted and up to 100 pounds intermittently in a team lifting situation * Ability to perform repetitive bending, reaching, stretching, lifting, twisting, pushing, and pulling * Strong communication skills

Westaff is Hiring for 1st and 2nd Shift Assembly Leads in Farmington, CT! 1st shift: Monday - Friday, 7:00am - 3:30pm 2nd shift: Monday - Friday, 3:30pm - 12:00am Pay Rate: $20-$22 an hour, depending on experience and shift The Header Assembler is responsible for setting up and operating a variety of power and manual equipment to manufacture standard and custom door package headers and moldings. This position requires strong attention to detail, precision, and a commitment to producing high-quality products that meet exact specifications. Assembly Lead Responsibilities: Set up, operate, and adjust power and manual equipment, including power presses, arbor presses, milling machines, drilling machines, cut-off saws, routers, and dies. Perform manufacturing operations such as blanking, slotting, punching, piercing, and drilling. Read and interpret blueprints, specifications, sketches, and special instructions to ensure accurate production. Maintain and modify equipment setups to accommodate changes in size, style, or specifications. Inspect work periodically to ensure quality standards are met and make adjustments as needed. Lubricate, clean, and maintain equipment and dies to ensure safe and efficient operation. Complete finishing tasks such as testing, adjusting, and packing parts for shipment. Maintain a clean, organized, and safe work area in accordance with company standards. Assembly Lead Qualifications: Previous experience operating power and manual equipment in a manufacturing or production environment. Ability to read and interpret blueprints and technical specifications. Strong attention to detail and commitment to quality workmanship. Effective communication skills and ability to work well in a team environment. Ability to stand for extended periods and lift up to 50 pounds. Willingness and ability to adapt to new processes, equipment, and technologies. Apply today for Immediate consideration! Military and Veterans are Encouraged to Apply! Westaff offers Assembly Leads free online classes, weekly pay, medical, vision, and dental

Heat Shield Assembler 1st ShiftHours: 7am-3:30pm Monday - Friday Pay: $18.00 Hamilton Connections is currently recruiting for an assembler for local manufacturing company in Wallingford, CT Essential Duties and Responsibilities: Assembly of steel parts using hand tools Spot welding Buffing Grinding Cutting metal using shears Job Requirements: High School Diploma or Equivalent Assembly experience with the ability to work and manipulate sheets of metal Measuring skills Reliable transportation Must be able to pass a pre employment drug test/background check

Job Details Position Type: Full time, 40h/week. OT as business needs dictate FLSA Classification: Non- exempt (hourly) Salary Range: $16.50/ hour paid weekly. The actual pay range will depend on varying circumstances and individualized factors, such as job-related knowledge, skills, experience, and other objective business considerations. Reports to: Production Manager Company description: Roto North America is a subsidiary of Roto Window and Door Technology, a global leader in window and door hardware, with 15 production plants and more than 30 subsidiaries worldwide. Through its 2 companies, Roto Frank of America, Inc. and Roto Fasco Canada, Inc., Roto North America has been manufacturing and offering a variety of leading North American and European window and door hardware products in the USA and Canada. To learn more about Roto Frank of America please visit us at: Welcome - Roto North America Summary: The Assembler will assemble manufactured products and pack according to specifications. Essential Functions: Accountable for daily assembly in Production Tasks: Assembles metal products according to directions. Reads blueprints or similar documentation then builds to those specifications. Uses various machines and hand tools to accomplish assigned tasks. Maintains logs, records, and reports concerning production, machine maintenance, and product inconsistencies. Inventories tools, parts, and supplies; contacts materials handler if supplies are needed. Periodically checks products per company policy to ensure quality and uniform completion; resolves any identified problems and alerts supervisor. Observe all safety requirements. Setup and operate a rivet machine. Package finished goods. Maintain required efficiency rates. Able to work with limited supervision. Capable of clipping lock bars both manually and automated. Sorting and packaging injection molding parts. Maintain a clean and neat work environment. Employee must show up to work on time and be able to work overtime as needed. Performs other related duties as assigned. Assumes responsibility without supervision, self-motivated and proactive Demonstrated ability to offer sound and relevant input, and to contribute and defend ideas during meetings and discussions Minimum Required Education: High school diploma or equivalent required. Required Work Experience: 0-1 Year of Manufacturing experience Work environment and Physical Requirements: Working conditions are based in a manufacturing setting. To perform this job successfully the individual must be able to stand and/or sit for prolonged periods of time. Must be able to traverse production facility and climb ladders. Must be able to lift and or move up to 50 pounds at a time. Must have manual dexterity in order to assemble products or machines as directed. Perform repetitive tasks throughout the entire shift. Must have excellent hand-eye coordination. Must wear gloves and safety glasses. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Benefits: Roto offers an attractive salary and benefits package: 401(k) 401(k) matching Employee assistance program Employee discount program Medical insurance Dental insurance Vision insurance Flexible spending account Health savings account Life insurance Short Term Disability insurance Voluntary Long Term Disability insurance Paid time off Paid Holidays

Who We Are National Assemblers, Inc. is the largest retail assembly company in the world, assembling over 10 million products for brands like Walmart, Amazon, Wayfair, and Bass Pro Shops. We were named “Assembly Company of the Year” and are the fastest-growing in our industry. Who You Are You're an independent, hands-on go-getter who loves assembling products, mounting TVs, and solving problems. You're entrepreneurial, reliable, and enjoy customer interaction. You want a stable W-2 employer. If that sounds like you, we want you on our team! What's in it for you? Flexible Hours: Work when you want - full-time, part-time, or on your own schedule. Weekly Pay: Get paid every week for the work you complete. Employee Benefits: Enjoy medical, dental, and vision insurance, plus a 401K plan. Paid Training & Certification: Receive full training and certification at no cost to you. W-2 Status: Be an employee (not a contractor) with all the benefits, insurance, and paid overtime. Key Responsibilities Assemble furniture (bed frames, desks, chairs, etc.). Mount and install TVs, pictures, and other home fixtures. Set up entertainment systems, soundbars, and streaming devices. Provide top-notch customer service and educate customers. Maintain accurate records of work performed. Follow safety and quality control procedures. What We're Looking For Experience in assembly, installation, or repair (preferred but not required). Mechanical aptitude and ability to use hand/power tools. Strong communication and customer service skills. Ability to lift 50+ lbs. and drive with a clean record. Ready to Start Building Your Future? Join National Assemblers, Inc. today! Apply now to start your flexible career with the benefits of being an employee. We look forward to building a future with you! National Assemblers, Inc. is an equal opportunity employer. National Assemblers, Inc is an equal opportunity employer and does not discriminate against otherwise qualified applicants on the basis of race, color, creed, religion, ancestry, age, sex, marital status, national origin, sexual orientation, disability or handicap, veteran status and any state and local protected status.

Hamilton Connections is seeking assemblers for the 1st shift at a warehouse in Enfield. Candidates with assembly experience are preferred. We have multiple openings. Apply now! The hours are Monday - Friday 8:00 AM - 4:30 PM. The pay is $17/hour. Must be able to lift up to 30 lbs.Must be able to stand/sit for long periods