Assembler jobs in Florence-Graham, CA

Benefits: * Medical / Health Benefits with multiple plan options, Flexible Spending Accounts, Dental and Vision * 401k * On the job training / cross-training * Life Insurance, disability insurance * Voluntary life insurance for family members available. * Accident and critical illness insurance optional. * Scheduled performance reviews * Referral program Job Description: Job Core Responsibilities: * Performs a range of routine mechanical and/or electromechanical assembly of small parts or components in accordance with company instructions and procedures * Reviews shop traveler route card, or uncomplicated schematic drawings to confirm correct sequence of operation * Position very small parts such as ceramic board, crystals, gages, fine pins, fire wire, solder particles and epoxy under binocular microscope using tweezers or positioning fixtures * Adjusts, bends, aligns and solders fine wires to resistors and base parts * Bonds or seals parts or assemblies with epoxies using direct heating elements or ovens and performs a variety of in-process testing * Demonstrates all safety policies and procedures * Other responsibilities as assigned * Regular, consistent and punctual attendance is required. May need to work nights and weekends, variable schedule(s) and additional hours as necessary Job Specifications: Education: A Secondary Certificate/High School Diploma or equivalent combination of relevant education and work experience that will allow successful performance of job expectations is preferred. Certifications: Vocational training, apprenticeships or the equivalent experience in related field Years Experience: 0-2 years of relevant experience Skills: * Good mechanical aptitude * Able to operate a variety of hand tools and light machinery * Capable of performing basic mathematics * Ability to read and interpret company documents, such as safety rules, operating/manufacturing instructions, policies and procedure * Good manual dexterity required to work with small parts * Able to problem-solve using existing procedures to perform straightforward tasks * Effective oral, written and interpersonal skills Must Haves (Required): Cable or electronic background Nice to Haves: RF testing on network analyzers, soldering

Responsibilities Assemble mechanical components according to specifications and blueprints. Fabricate parts using hand tools, machines, and soldering techniques. Work with printed circuit boards (PCB) and ensure compliance with IPC 610 standards. Utilize measuring instruments such as calipers and ohmmeters to verify dimensions and electrical properties. Perform electrical wiring tasks, including connecting logic controllers and other electronic devices. Conduct quality checks throughout the assembly process to maintain product integrity. Collaborate with team members to troubleshoot assembly issues and improve processes. Maintain a clean and organized work environment to promote safety and efficiency. Experience Proven experience in assembly or a related field is preferred. Familiarity with surface mount technology (SMT) is a MUST Proficient in using hand tools, soldering equipment, and measuring devices. Knowledge of electrical wiring practices and logic controllers is advantageous. Ability to read technical documents, schematics, and blueprints effectively.

W2 Contract (ongoing) Long Beach, CA Monday-Friday 6am-2:30pm $20/hr + Benefits. Weekly Pay! We're looking for a dedicated, detail-oriented, and dependable professional to help build high-quality products that make a difference. In this hands-on role, you'll be part of a collaborative production team focused on precision, efficiency, and excellence. This is a full-time, on-site position requiring your presence five days per week. What You'll Do Assemble and build products using various hand and power tools, including wire strippers, crimpers, drills, and soldering equipment. Inspect components for quality and report any defects or issues to production leads. Stay up to date with certifications and training across all assigned production lines. Record production details accurately and communicate any issues promptly. Follow all safety procedures and wear appropriate personal protective equipment (PPE). Take part in team training, continuous improvement efforts, and process optimization. Collaborate with teammates and assist in cross-functional production tasks. Maintain a clean, safe, and well-organized workspace. Support production goals by working additional shifts or overtime when needed. Perform other related duties as assigned. Required: High school diploma or equivalent. Previous experience in assembly or kitting/packaging. Ability to read and understand written and verbal instructions in English. Strong attention to detail and a proactive attitude. Excellent manual dexterity and hand-eye coordination. Comfortable standing, walking, and performing repetitive tasks for long periods. Ability to lift up to 50 lbs (with assistance as needed). Dependability, time management, and a commitment to quality work. Preferred: 1+ year of experience in a manufacturing or assembly environment. Familiarity with ISO 13485 or similar quality management systems. Knowledge of lean manufacturing or continuous improvement principles. Work Environment Fast-paced manufacturing setting with exposure to machinery, tools, and varying temperatures. Requires frequent bending, twisting, lifting, pulling, and standing throughout the shift. Regular use of inspection tools and materials handling equipment. Compliance with all safety standards and use of required PPE at all times.

Ultimate Staffing is actively seeking an Electrical Assembler to join a growing electronics manufacturing team in Irvine, CA. This is an exciting opportunity to contribute to the production of high-quality circuit boards for innovative technologies. Job Type: Temp-to-Hire Schedule: Monday-Friday, 9:00 AM to 5:00 PM Perks & Benefits: Competitive hourly wage Health insurance options Employee Discount Clubs Career advancement opportunities & specialized recognition programs Responsibilities: Assemble and build electrical components and circuit boards according to specifications Inspect and test completed assemblies to ensure functionality and quality standards Read and interpret technical drawings, schematics, and assembly instructions Maintain a clean and organized work area while adhering to safety protocols Collaborate with team members and supervisors to meet production goals Qualifications: High School Diploma or equivalent Warehouse background preferred Previous experience in electrical assembly or related manufacturing environment a plus If you're ready to bring your skills to a growing team and meet the qualifications above, please submit your resume today to be considered for this exciting opportunity! All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance. For unincorporated Los Angeles county, to the extent our customers require a background check for certain positions, the Company faces a significant risk to its business operations and business reputation unless a review of criminal history is conducted for those specific job positions.

Job Posting Start Date 10-10-2025 Job Posting End Date 12-19-2025 Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a/an Switchgear Assembler in USA, Fontana Ca. Reporting to the Production Manager the Switchgear Assembler is responsible for assembling fabricated metal parts for switchgear cabinets according to specifications. What a typical day looks like: Review, analyze, and follow various blueprints, diagrams, drawing, procedures, and work instructions to complete assemblies for enclosure buildings Mechanical assembly of components for switchgear cabinets Uses various power tools and hand tools (ex. Drills, impacts, screwdrivers, grinders, etc.) to accomplish assigned tasks Conduct quality assurance checks to confirm that assembled products meet specifications and quality standards Identify any product defects; record and report them accordingly Monitor and maintain inventory of necessary supplies, tools, and parts in work station Maintain a clean and safe work area Perform all other duties as assigned The experience we're looking to add to our team: High School Diploma or equivalent 0-2 years of related experience in assembly or manufacturing setting Prior experience operating powered equipment (forklift, reach truck, scissors lift, overhead crane, etc.) Strong attention to detail and ability to perform work accurately Knowledge of manufacturing, equipment maintenance, and safety management Reading comprehension skills with the ability to interpret and follow written directions, blueprints, wiring drawings, schematics, and engineering diagrams Basic math skills to meet technical specifications and measurements Basic understanding of tools (ex. Tape measure, impact drill, etc.) Demonstrated proficiency with the ability to safety operate powered equipment (forklift, reach truck, scissors lift, overhead crane, etc.) What the physical requirements are: Prolonged periods of standing, bending, kneeling, and performing repetitive tasks. Must be able to lift, push, pull up to 35 pounds at a time. Must have manual dexterity in order to assemble products or machines as directed. Must have excellent hand-eye coordination. Ability to differentiate between colored wires, tabs, and electronic components. Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor #LI-GB1 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to California)$17.98 USD - $24.27 USD HourlyJob CategoryOperations Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).

The Optical Assembly Technician is responsible for the precise assembly, alignment, and testing of optical components and systems. This position requires a strong attention to detail, excellent manual dexterity, and the ability to work with microscopes and fine tools in a lab environment. The technician will follow technical drawings, and work instructions to ensure product quality and performance standards are met. Primary Duties & Responsibilities Assemble optical components (lenses, mirrors, prisms, filters) into mechanical housings using specialized tools and adhesives. Perform precision alignment of optical assemblies using alignment fixtures and laser alignment systems. Inspect optical components for defects such as scratches, chips, and coating flaws using microscopes and interferometers. Handle and clean optics using industry-standard procedures (e.g., use of IPA, lint-free wipes, static control tools). Read and interpret engineering drawings, work orders, and process instructions. Conduct performance tests on finished assemblies using optical testing equipment. Record test results and maintain accurate production and quality documentation. Collaborate with engineering and quality assurance teams to resolve issues and improve processes. Maintain a clean and organized work area, following all contamination control protocols. Follow safety and ESD (electrostatic discharge) guidelines at all times. Education & Experience High school diploma or equivalent; technical certificate or associate degree in optics, electronics, or related field preferred Minimum of 2 years of experience in optical or precision assembly, or relevant hands-on technical experience Skills Proficiency using microscopes, tweezers, torque drivers, and other fine assembly tools Strong hand-eye coordination and manual dexterity Ability to follow detailed work instructions and technical drawings Basic computer skills for data entry and documentation Preferred Skills Experience working in a cleanroom or controlled environment Familiarity with ISO standards and quality systems Knowledge of laser safety and optical coatings Working Conditions Work is performed in a lab environment with strict contamination controls May require use of PPE such as gloves, cleanroom attire, and safety glasses Physical Requirements Requires sitting or standing for extended periods and working with small parts. Safety Requirements All employees are required to follow the site EHS procedures and Coherent A&D EHS standards. Quality and Environmental Responsibilities Depending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System. Culture Commitment Ensure adherence to company's values (ICARE) in all aspects of your position at Coherent A&D: Integrity - Create an Environment of Trust Collaboration - Innovate Through the Sharing of Ideas Accountability - Own the Process and the Outcome Respect - Recognize the Value in Everyone Enthusiasm - Find a Sense of Purpose in Work Coherent A&D is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. This role involves access to technology, materials, software, or hardware subject to U.S. export control laws. Therefore, to be considered, candidates must be classified as a “U.S. Person” under applicable regulations or be eligible for authorization under a U.S. government export license. If you need assistance or an accommodation due to a disability, you may contact us at ****************************** .

This position requires the assembling of parts according to instructions and within a specific time frame, while using the appropriate tools and/or equipment according to safety and quality standards, as well as carrying out any other duties as directed by the Leadman or Supervisor. ESSENTIAL FUNCTIONS Read, interpret and follow basic blueprints, diagrams, engineering drawings, specifications, bills of materials, and other written instructions or procedures to accurately assemble equipment and products Perform quality work checks to insure the product meets quality standards Identify product defects and complete appropriate documentation when defects are identified Perform all work in accordance with quality standards and established safety procedures Maintain a clean and safe work area Assembling units as directed by the trainer, Lead or Supervisor with quality in mind in a specified time frame. Performed adjustments needed to ensure factory settings and specifications using schematics and/or engineering documentation. Must be able to lift up to 25 pounds. Must be able to climb up ladders. May be required to work beyond normal business hours when necessary. Supporting company policies and procedures, goals and objectives, ISO policies, and good manufacturing practices. NON-ESSENTIAL FUNCTIONS Regularly perform repetitive tasks Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus Ability to perform work accurately and thoroughly Ability to use thinking and reasoning to solve a problem and to think in such a way as to produce a new concept or idea Demonstrate commitment to an Injury-Free Environment through own actions and mentoring others. Communicate and enforce corporate environmental, health, and safety program. Fill out forms, as need. REPORTING RELATIONSHIP Laser Supervisor Laser Lead SUBORDINATE STAFF None KNOWLEDGE Forklift and Overhead Crane Preferred. Be able to use the metric system. Must be a good communicator. Must be able to use Hand Tools and Power Tools. Must have assembly experience. Enthusiastic, cooperative, and positive behavior. ISO experience a plus. SKILLS High attention to detail and self-motivation skills Basic reading skills. Must be able to follow directions Basic computer navigation and utilization skills Must be able to use addition, subtraction, multiplication and division. Must be able to work in a team and follow deadlines. Must have good leadership and communication skills. WORK SCHEDULE 10/4 Schedule Monday - Thursday 6:00am - 5:00pm PAY RANGE $24.00-$26.00/HR EDUCATION and QUALIFICATION High School education preferred. MENTAL Ability to accept and follow instructions. Being open to feedback from peers, Leadman and Supervisor. Realize one's own limitations and seek assistance when needed.

About the Company: DwyerOmega is a globally trusted leader in manufacturing innovative instrumentation solutions for the Process Measurement, Automation, Control and HVAC markets. With very strong brand recognition and high levels of customer loyalty, DwyerOmega has an unmatched reputation for providing customized solutions that meet and exceed customer needs. Our team of engineering experts help our customers select technical, and often configured, product solutions for their unique applications. The company offers over 300,000 state-of-the-art products for process measurement and control of temperature, humidity, pressure, strain, force, flow, level, pH, conductivity, and indoor air quality, and is a recognized global leader in the digital marketing of technical products. The products that we manufacture are used to control and drive process efficiency, creating safe and sustainable environments. At DwyerOmega, we enable our customers to improve the world - one measurement at a time. We achieve this through our unwavering commitment to technology, customer service, and overall continuous improvement. Every day, we strive to cultivate a culture of ingenuity, empowerment, accountability, adaptability, and speed. The company's corporate headquarters are based in Michigan City, Indiana, and Norwalk, CT with manufacturing locations and sales offices located throughout the world. Analytical Industries: Analytical Industries is a leading provider of advanced gas analysis and measurement solutions for industrial, medical, and environmental applications. We take pride in our engineering excellence, precision manufacturing, and commitment to helping customers achieve accurate, reliable process control. As part of the DwyerOmega family, we bring together decades of instrumentation expertise and customer-focused innovation. Position Summary: The Assembler is responsible for assembling, wiring, soldering, testing, and inspecting small electro-mechanical components used in sensor and analyzer products. This position requires close attention to detail, steady hands, and adherence to established quality and safety standards. Working under the direction of the Lead or Production Manager, the assembler follows detailed assembly instructions, performs accurate and repetitive work, and supports overall production efficiency. The role also includes maintaining a clean and organized work area and performing all other duties as assigned. Responsibilities include the following. Other duties may be assigned. * Assemble electrochemical sensors and electromechanical analyzers, and related subcomponents according to engineering drawings, schematics, and work instructions. * Perform wiring, soldering, and mechanical assembly using hand tools and electronic testing equipment. * Log production results, nonconformities and test outcomes accurately in manufacturing documents such as the DHR. * Inspect components before assembly for defects or non-conformance. * Maintain a clean and organized work area in accordance with safety and 5S practices. * Collaborate with engineering and quality teams to identify assembly issues and propose process improvements. * Follow all company policies related to safety, quality assurance, and environmental compliance. Requirements Essential/Preferred Skills: * 1-2 years of work experience in electro-mechanical assembly, preferably in sensor instrument manufacturing. * High school diploma or GED equivalent. * Ability to read and interpret drawings, schematics, and work instructions. * Prior experience with hand tools. * Strong attention to detail and commitment to product quality. Work Conditions and Physical Requirements: * Work performed primarily in an office/manufacturing space. * Frequent sitting, standing, bending, and using small tools. * May involve handling chemicals used in assembly rooms. * Use of PPE (gloves, safety glasses) as required. * May require repetitive motions to maintain quality of sensor/analyzer products.

Preferred Job Qualifications: Previous experience in aerospace manufacturing or related industries familiarity with inspection processes and basic quality standards Ability to perform polishing and cleaning and packaging with attention to detail. Forklift certification or proven forklift operating experience. Ability to safely lift and move materials as required. Strong organizational and time management skills valid driver's license with a clean driving record Ability to follow written and verbal instructions accurately. Commitment to safety protocols and workplace cleanliness Strong teammate skills with the ability to work independently when needed. Physical and Mental Requirements: Able to lift 25 pounds regularly. Ability to sit or stand for extended periods. Must be adaptable to a constantly changing environment and perform well under deadlines. Experience and Education: Previous experience in a similar role is preferred but not required. Must demonstrate the ability to learn and apply new skills effectively. We are looking for motivated individuals who can contribute to our team-oriented environment and handle the demands of a high-paced production setting. Please note that this job description is not exhaustive. Management reserves the right to add, modify, change, or rescind work assignments or different positions and to make reasonable adjustments to ensure qualified employees can perform the essential functions of the job. Hourly Rate of Pay: $18.00/ hour to $20.00/ hour **Please note that the salary range information is only applicable to California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee's pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Equal Opportunity Employer: Western Precision Aero is an Equal Opportunity Employer and all employees of RBC are subject to E-Verity. Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident) or a Foreign Person for whom a license is obtained.

Job DescriptionElectro-Mechanical AssemblersLocation: Chatsworth, CA Duration: 3 - 6 months or longer Schedule: Monday - Friday, 06:00 AM - 2:30 PM Pay Rate: $23.00 - $25.00 per hour (based on experience) Requirements: Experience performing electrical AND mechanical assembly work Ability to read and understand manufacturing drawings and work instructions Ability to speak, read and write in English Must be capable of using standard tools required for electrical/mechanical assembly (crimpers, torque tools, standard hand tools, etc.) Must be able to work in a fast-paced production environment with minimal supervision

Temp To Full-Time Skillset Group is seeking a Wire Harness Assembler to work in the Irvine, CA area. This position will under shop supervision the Inspect and perform work in accordance with IPC-A610 and other quality standards as needed. This will be a 1st shift position and will be contract to hire. To apply email: ************************* Pay: $30-$33/hr,

Individual Contributor in charge of performing, within his / her area of technological specification, tasks in the manufacturing process in accordance with the manufacturing documentation and the time allocated, using the resources available (including conventional and/or digital machine tools) and inspects his / her own work: Performs Manufacturing operations in accordance with the associated documentation and the time allocated, using the resources available Is responsible for complex work and rework at unit and component level Chooses and implements suitable methods, resources and procedures; Brings support to the operators; Initializes and manages continuous improvement actions in and around his/her area; Performs final inspection duties when requested in accordance with drawings, EOs and any other regulatory requirement pertaining to the product.

Job Description Under general supervision, performs a wide variety of electromechanical or mechanical production sub-assembly and assembly operations to build up and assemble difficult and complex instruments. Duties may include following techniques to wire, prepare cable harnesses and install cable harnesses. Perform coating, mixing and cooking of raw materials to create finished products. Essential Job Functions Assembly Activities Under general supervision, performs various tasks requiring knowledge of assembly techniques, tools, materials, machines and equipment. Assembles electromechanical instruments or fabricated parts to make subassemblies or complete instruments using hand tools, power tools and special tools and/or calibration equipment. Determines methods and sequence of assembly operations where complete information is not readily available or follows assembly shop and production operations sheets, wire lists, samples, blue prints, schematics and verbal instructions to perform a wide variety of assembly operations. Fits, aligns, calibrates and adjusts parts and mechanisms to meet tolerances and product operating and quality requirements. Works from engineering drawings, rough sketches, and manuals, verbal or written instructions from Lead Assembler or Supervisor. Performs in-process and final quality inspection of assembled products. Examines drawings and work orders to determine the work that needs to be performed. Utilizes appropriate machines and tools to install, mount, fasten, align and adjust parts, components, wiring and harnesses. Evaluates assembly procedures and manuals and recommends revisions when required. Performs such tasks as replacing components and wiring circuits. Trains new hires and co-workers as necessary to enhance skill level and knowledge base. Examines and tests assembly at various stages of production to identify errors. Maintains a record of the assembly process, progress and problems. Provides feedback to supervisor when a deviation from accepted practice or safety issues are recognized. Utilizes small hand tools such as wire strippers, crimpers, wrenches, screwdrivers, pliers, and hammers. Identifies and selects components to be integrated into sub-assembly and assembly units. Makes own set-ups, alignments and adjustments maintaining tolerance in accordance with instructions. Disassembles, modifies, reworks, refurbishes, reassembles, and tests instruments as required. Clean and coat molds for fixtures and product used. Perform mixing and cooking of gels in a laboratory environment. Other Activities Evaluates and recommends changes in methods and procedures in assigned area of responsibility. Performs data entry on work-in-process transaction and parts ordering. Recommends and implements methods to promote teamwork and maintains a pleasant work environment within department and with other departments. Trains new team members on how to fill out DHR such as batch record and traveler during the production run. Seeks constant improvement in work processes and techniques. Assures that laboratory and assembly areas are in an orderly and functional condition. Suggests improvement in departmental work processes and procedures. Maintains good communications with peers, Lead Assembler and Supervisor. Attends and participates in group meetings, task force groups, etc., as needed. Works with Support Engineering to develop and maintain time standards. Aids Support Engineering with design of assemblies and units for manufacturing capability. Performs other duties and projects as assigned by Supervisor and/or Lead Assembler. Essential Job Requirements Education High school diploma, GED or equivalent education and experience. Experience & Minimum Qualifications 4-6 years of assembly experience in a fast-paced manufacturing environment Ability to follow schematics and assemble wire harnesses is a must. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals, engineering prints and schematics. Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals using a calculator. Ability to compute rate, ratio and percent, and to draw and interpret bar graphs. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Ability to use standard power hand tools and custom tools, gauges, and other calibration equipment and assembly fixtures. Ability to lift 25 to 50 pounds is an asset Strong organizational skills through demonstrated ability to multi-task and manage time Established collaboration skills and the ability to communicate with openness and transparency. Ability to comply with FDA Good Manufacturing Practices (GMP). Ability to meet production schedules and project deadlines. Exposure and training to Six Sigma and/or lean manufacturing preferred. Physical Requirements & Working Environment Ability to work safely and according to departmental procedures when working at high temperatures with hazardous equipment and materials such as oven, mixers, hot plates, ultrasonic cleaner, pressure cooker, fume hood, power tools, wire strippers, heat guns, heated cutting blades and others. Ability to work safely and according to departmental procedures when handling volatile chemicals which may or may not be hazardous. Ability to work safely in a chemical laboratory environment. Ability to occasionally lift and/or move up to 50 lbs. Ability to successfully respond to multiple work pressures. Ability to communicate verbally to individuals and groups. Ability to communicate verbally in person and using a phone. Ability to listen for understanding and assisting in problem solving. Ability to regularly use hands to utilize maximum dexterity. Ability to frequently to walk, stand, sit, and reach with hands and arms. Ability to occasionally to stoop, kneel, crouch, or crawl and hear. Specific vision abilities required include close vision, color vision, and ability to adjust focus. "Sakura Finetek USA, Inc. is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law.” The above description identifies the essential job functions and skills needed by the person or persons assigned to this position. These job functions and skills are not intended to be a complete and exhaustive list of all responsibilities, duties and skills required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. The information contained herein is subject to change at the company's discretion.

Job DescriptionJoin Siemens in Pomona, CA At Siemens, we bring the real and digital worlds together to drive sustainable progress. Your growth matters to us, and you'll be part of a diverse team that supports and challenges you to learn in new ways. What a typical evening looks like You arrive for 2nd shift at 4:00pm, ready to dive into the day's production plan. After three months of onboarding on 1st shift, you'll be fully immersed in evening operations until 12:30 Midnight, keeping our switchboards and lighting panels moving through the line. You review work orders on your station computer, scan in, gather materials, and begin assembling. Use hand and power tools to build and modify electromechanical assemblies (switchboards, lighting panels, and related equipment). Follow blueprints, bills of materials, and one-line diagrams to complete assigned builds. Fasten and secure parts to frames/cabinets, create subassemblies, and complete unit assemblies. Process, scan into/out of work orders and track progress according to schedule or expedited priorities. Keep equipment and your work area clean to maintain safe, reliable operations. Compensation and Schedule Pay $19.22 Location: Pomona, CA 2nd shift: 4:00pm - 12:30 Midnight Training: 3 months on 1st shift What you'll bring Comfort with basic computers and fundamental mechanical/measuring tools. Ability to read, write, speak, and understand English. Capacity to stand for extended periods and handle physical tasks. Reach, grasp, and lift up to 50lbs; push/pull/slide heavy materials. Ability to stoop, bend, squat, crawl, and climb. At least 18 years of age. Detail oriented, able to multi-task in a fast-paced production environment. Eager to learn all equipment in the facility and follow defined processes. Legally authorized to work in the United States on a continual and permanent basis without company sponsorship Preferred experience Exposure to blueprint reading. Background working with large industrial machinery. Core proficiencies Mechanical assembly Blueprint reading Bring your hands-on skills and curiosity-together we'll power what matters.

Job Posting Start Date 10-10-2025 Job Posting End Date 12-19-2025 Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a/an Panel Assembler in USA, Fontana Ca. Reporting to the Production Manager the Panel Assembler is responsible for assembling fabricated metal parts for relay and control panels according to specifications. What a typical day looks like: Review, analyze, and follow various blueprints, diagrams, drawing, procedures, and work instructions to complete assemblies for relay and control panels. Assemble relay and control panel metal cabinets Uses various power tools and hand tools (ex. Drills, impacts, screwdrivers, grinders, etc.) to accomplish assigned tasks Conduct quality assurance checks to confirm that assembled products meet specifications and quality standards Identify any product defects; record and report them accordingly Monitor and maintain inventory of necessary supplies, tools, and parts in work station Maintain a clean and safe work area Perform all other duties as assigned The experience we're looking to add to our team: High School Diploma or equivalent 0-2 years of related experience in assembly or manufacturing setting Prior experience operating powered equipment (forklift, reach truck, scissors lift, overhead crane, etc.) Strong attention to detail and ability to perform work accurately Knowledge of manufacturing, equipment maintenance, and safety management Reading comprehension skills with the ability to interpret and follow written directions, blueprints, wiring drawings, schematics, and engineering diagrams Basic math skills to meet technical specifications and measurements Basic understanding of tools (ex. Tape measure, impact drill, etc.) Demonstrated proficiency with the ability to safety operate powered equipment (forklift, reach truck, scissors lift, overhead crane, etc.) What the physical requirements are: Prolonged periods of standing, bending, kneeling, and performing repetitive tasks. Must be able to lift, push, pull up to 35 pounds at a time. Must have manual dexterity in order to assemble products or machines as directed. Must have excellent hand-eye coordination. Ability to differentiate between colored wires, tabs, and electronic components. Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor #LI-GB1 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to California)$17.98 USD - $24.27 USD HourlyJob CategoryOperations Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).

Assembly Earn extra income on your terms! Join Airtasker, the community platform connecting people ready to work with those who need jobs done. With Airtasker, you decide when and where you work-choose tasks that match your skills, set your own rates, and work as much or as little as you want. No startup fees, no monthly costs-just a straightforward way to turn any skill into extra income or build a career at your own pace. Complete tasks like regular furniture assembly, trampoline assembly, excercise equipment assembly and more! Get started today! Why Join Airtasker? Flexible income: Be your own boss, set your own hours, and choose tasks that fit your schedule. Easy start: Most tasks require no special licensing or vetting, so you can start right away. Wide variety of tasks: Find everything from handyman work and pet care to skilled trades and creative gigs. Build your reputation: Stand out with reviews, earn badges, and increase your visibility to customers. Lower fees for loyal Taskers: Complete more tasks to enjoy lower service fees over time. Requirements: Age 18 or older Own an iPhone or Android smartphone Have the tools and skills for accepted jobs Commit to excellent customer service Keep work on the platform so we both earn! No need to apply-simply sign up on Airtasker.com, browse available tasks, and start making offers today! Start earning now!

The Assembler is responsible for putting together component parts or pieces adhering to a specified set of blueprints or schematics. They verify the correct quantities of components parts and quality checking completed items, manage parts inventory and use hand tools and mechanical equipment to produce structurally sound products and structures. Responsibilities: *Follow technical instructions, interpret engineering blueprints and technical terms. *Discern quality of parts and materials used in production. *Inventory parts and tools used in the assembling process. *Follow company procedures and directives. *Test finished products for defects. *Maintain the tools used to create products. *Keep a clean and well-maintained workspace. Education and Experience: *High School diploma/GED or equivalent experience in related field. Skills: *Good communication skills *Physical fitness and strength to lift and operate heavy electrical machinery *Excellent hand-eye coordination *Good communication skills *Ability to operate soldering machines *Ability to create and Interpret technical documentation *Basic computer skills such as emailing, record keeping, ordering, inventory management and form filing *Willingness to work in flexible shifts

About the Company: DwyerOmega is a globally trusted leader in manufacturing innovative instrumentation solutions for the Process Measurement, Automation, Control and HVAC markets. With very strong brand recognition and high levels of customer loyalty, DwyerOmega has an unmatched reputation for providing customized solutions that meet and exceed customer needs. Our team of engineering experts help our customers select technical, and often configured, product solutions for their unique applications. The company offers over 300,000 state-of-the-art products for process measurement and control of temperature, humidity, pressure, strain, force, flow, level, pH, conductivity, and indoor air quality, and is a recognized global leader in the digital marketing of technical products. The products that we manufacture are used to control and drive process efficiency, creating safe and sustainable environments. At DwyerOmega, we enable our customers to improve the world - one measurement at a time. We achieve this through our unwavering commitment to technology, customer service, and overall continuous improvement. Every day, we strive to cultivate a culture of ingenuity, empowerment, accountability, adaptability, and speed. The company's corporate headquarters are based in Michigan City, Indiana, and Norwalk, CT with manufacturing locations and sales offices located throughout the world. Analytical Industries: Analytical Industries is a leading provider of advanced gas analysis and measurement solutions for industrial, medical, and environmental applications. We take pride in our engineering excellence, precision manufacturing, and commitment to helping customers achieve accurate, reliable process control. As part of the DwyerOmega family, we bring together decades of instrumentation expertise and customer-focused innovation. Position Summary: The Assembler is responsible for assembling, wiring, soldering, testing, and inspecting small electro-mechanical components used in sensor and analyzer products. This position requires close attention to detail, steady hands, and adherence to established quality and safety standards. Working under the direction of the Lead or Production Manager, the assembler follows detailed assembly instructions, performs accurate and repetitive work, and supports overall production efficiency. The role also includes maintaining a clean and organized work area and performing all other duties as assigned. Responsibilities include the following. Other duties may be assigned. Assemble electrochemical sensors and electromechanical analyzers, and related subcomponents according to engineering drawings, schematics, and work instructions. Perform wiring, soldering, and mechanical assembly using hand tools and electronic testing equipment. Log production results, nonconformities and test outcomes accurately in manufacturing documents such as the DHR. Inspect components before assembly for defects or non-conformance. Maintain a clean and organized work area in accordance with safety and 5S practices. Collaborate with engineering and quality teams to identify assembly issues and propose process improvements. Follow all company policies related to safety, quality assurance, and environmental compliance. Requirements Essential/Preferred Skills: 1-2 years of work experience in electro-mechanical assembly, preferably in sensor instrument manufacturing. High school diploma or GED equivalent. Ability to read and interpret drawings, schematics, and work instructions. Prior experience with hand tools. Strong attention to detail and commitment to product quality. Work Conditions and Physical Requirements: Work performed primarily in an office/manufacturing space. Frequent sitting, standing, bending, and using small tools. May involve handling chemicals used in assembly rooms. Use of PPE (gloves, safety glasses) as required. May require repetitive motions to maintain quality of sensor/analyzer products. Salary Description $18-$20

Temp To Full-Time Skillset Group is seeking a Wire Harness Assembler to work in the Irvine, CA area. This position will under shop supervision the Inspect and perform work in accordance with IPC-A610 and other quality standards as needed. This will be a 1st shift position and will be contract to hire. To apply email: *************************