Assembler jobs in Glendale, AZ - 112 jobs

Leonard Workforce Solutions is recruiting for a Mechanical Assembler for a temp-to-hire opportunity for our client in Chandler AZ. This Mechanical Assembler will be supporting hands-on production and assembly operations in a regulated manufacturing environment. This role is best suited for candidates who already have prior manufacturing or mechanical assembly experience and are looking for a long-term opportunity with growth potential. The temporary assignment is from 3-6 months, with an opportunity to be hired permanently with the organization at the end of the period. Key Responsibilities Perform mechanical and sub-assembly operations under direct supervision Handle, measure, and process inert and controlled materials while following strict safety procedures Set up and operate precision measuring tools, including analytical balances Assemble components using work instructions, drawings, and visual references Perform minor electrical and mechanical tasks such as cabling, tinning, potting, and component installation Operate pressing equipment used in material or component forming processes Assist with basic setup of assigned production equipment Perform soldering tasks as part of assembly operations Install and integrate subassemblies into higher-level assemblies Maintain high levels of manual dexterity and attention to detail in a safety-sensitive environment Complete required training and maintain applicable certifications as assigned Support production needs through additional duties as required Experience & Skills At least 1 year of hands-on experience in a manufacturing, mechanical assembly, or production environment Prior exposure to soldering or small-component assembly strongly preferred Experience following technical work instructions, drawings, or schematics Familiarity with precision tools, measuring equipment, or production machinery Ability to work effectively in a structured, process-driven environment Education No formal education required for this role Advancement opportunities may require additional education or certifications Working Conditions Temp-to-hire opportunity based on performance and business needs Overtime may be available, including Fridays or Saturdays as required Must be able to lift and move up to 50 pounds Candidates will be required to perform a dexterity test during the interview process. If interested, please apply now or email Kati Becker at *******************!

Job Title: Electromechanical Switch Assembler Company: Custom Control Sensors Location: Phoenix, AZ Employee Type: Full Time, Non-Exempt Industry: Manufacturing Education: High School Diploma or equivalent GEDExperience: Six months or more of experience in a similar industry or some technical training Company Overview Custom Control Sensors, LLC (CCS) is a global leader of pressure, temperature, and liquid flow switches and sensors for the Aerospace, Defense, and Industrial markets. Since 1957, we have provided high-reliability electro-mechanical devices that utilize the "DUAL-SNAP" action disc spring principle we pioneered. We are AS 9100 and ISO 9001 certified. Industrial Product certifications include UL, CSA, ATEX, GOST, CCC and IECEx. We are growth-orientated, and dedicated to the continued cultivation of a vibrant, energetic work environment. Fostering interaction and collaboration between all associates, connection with our customers, and opportunity for creativity is our primary focus. Benefits MedicalDental 401k with MatchEmployer funded Life Insurance and Long-term DisabilityVoluntary Short-term DisabilitySick and Vacation Leave9 Paid Holidays Job Description:On a production basis, performs light electronic and/or electromechanical assembly work of low complexity and limited scope. Performs only relatively simple assembly procedures, which require primarily manual dexterity and the ability to work with simple hand tools. The cycle of repetition is ordinarily short with long work runs on the same or similar items. Parts are ordinarily not difficult to handle and soldering, if required, does not involve access problems. Works from samples or simple visual aids (clearly marked drawings or photographs, etc.) and receives detailed instructions as to exact procedures to be followed. Excludes those who are engaged primarily in loading and operating a machine, which assembles parts or components. Key Responsibilities:Performs only relatively simple assembly procedures Performs operation of contact welder;Performs operation of orbital swager; Utilizes a variety of tools, gages and equipment;Keeps quality up to acceptable standards with little discrepant work;Performs tasks equal to or exceeding established standards;Accomplishes production quotas;Keeps work area clean and orderly;Ability to react to changes productively and perform other essential tasks as assigned; Skills and Requirements:Due to need to maintain ITAR compliance, applicants must be U.S. citizen or legal permanent resident.Performs light electronic and / or electromechanical assembly work of low complexity and scope;Operation of resistance soldering unit;Performs frequent spring linking as required;Adequate manual dexterity to safely and proficiently work with simple small hand tools;Ability to work from samples or simple visual aids;Ability to read, write, and follow written and verbal instruction in English;Ability to work well with only a modest amount of repeated instructions;Working consistently, working overtime, as required;Be team oriented and possess flexibility and adaptability. Physical Requirements:The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is continuously required to sit, use hands and fingers to flex and extend fingers with opposition of thumb-palmar grasp, talk or hear. The employee is frequently required to stand, walk, bend, stoop, reach, turn, twist, push, pull and to move within all areas of the facilities and parking lots. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision peripheral vision, color vision, depth perception and the ability to adjust and focus. EEO M/F/D/V Custom Control Sensors, LLC. is an Equal Opportunity employer. All qualified applicants for employment shall receive fair and equal treatment regardless of their race (including hair texture and protective hairstyles, such as braids, locks, and twists), color, religion, creed, sex/gender, marital or registered domestic partnership status, age, national origin or ancestry, citizenship, pregnancy, childbirth, breastfeeding or related medical conditions, mental or physical disability (including HIV and AIDS), medical condition including genetic information or characteristics (including those of family members), sexual orientation, veteran or military status, gender identity, gender expression, transgender status or any other basis protected by federal, state or local law, ordinance or regulation. The policy not to discriminate includes, but is not limited to, advertising for positions, recruiting, hiring, placement, promotion, transfer, rates of pay, discipline and termination. No recruiters or recruitment agencies. Compensation details: 18-21 Hourly Wage PIb4f07a850013-31181-37063212

Job Description The Assembler will assemble materials, parts and goods on assembly lines or designated workstations. May use hand tools, wires, etc. to produce and deliver a quality product in a timely manner for internal and external customers. Eliminates scrap and additional costs using zero defects' methods and following work instructions and processes. Always work in a safe manner following the safety policies, housekeeping, and environmental policies. Position Responsibilities may include: • Assemble / install materials, parts and equipment on assembly lines or designated workstations. • Potential tasks may include putting lids on boxes, scanning inventory, installing wires, compressors, tops, panels, and other general assembly tasks. • Ensure all parts and materials used match the bill of material. • Ensure work meets quality standards. • Ensure work is performed timely and efficiently to meet production requirements. • Maintain workspace in terms of organization and cleanliness. • Follow safe work practices, protocols, and company policies. • Wear/use always required personal protective equipment. • Perform additional projects/duties to support ongoing business needs. Nature & Scope: • Works within well-defined instructions • Uses established procedures and works under supervision to perform assigned tasks • Work is closely supervised Knowledge & Skills: • Ability to operate air and hand tools, wrenches, screwdrivers, ratchets, and screw guns. • Ability to perform duties with efficiency, safety, high quality, and timely following work instructions to meet production requirements. • Attention to detail and basic math / counting skills. • Ability to interpret and follow work instructions including all safety policies. • Effective verbal and written communication skills • Ability to get along well, communicate timely and accurately with co-workers, supervisors and team leads. • Ability to pass in-house training program. • Good eye/hand coordination • Requires physical labor and repetitive movement including lifting/moving product. • Ability to work with limited supervision. • Ability to stand extended periods of time, 8-10 hours a day. • Ability to work overtime as needed, including working up to a 5 to 7-day work week occasionally and/or during peak season. • Ability to apply good judgement, strong work ethics and integrity on the job. Experience • Previous manufacturing experience is preferred Education/Certification: • High School diploma or GED equivalent preferred People Management: No Physical Requirements / Work Environment: • Must be able to perform essential responsibilities with or without reasonable accommodations. • Manufacturing environment with forklift traffic. • PPE required: steel toed safety shoes, safety glasses with side shields, and gloves. • Job requires standing (up to 90%), walking (up to 10%), stooping or bending, reaching, twisting and turning. • Lifting, carrying, and pushing up to 40 lbs. • Hand Eye Coordination, handling tools and other objects (holding, grasping), repetitive wrist motion (flexion/rotation), and repetitive foot movements (Foot Pedals). Reports To: Department Supervisor/Manager The Company provides equal employment opportunity to all employees and applicants regardless of a person's race, color, religion (including religious dress or grooming practices), creed, national origin (including language use restrictions), citizenship, uniform service member or veteran status, ancestry, disability, physical or mental disability (including HIV/AIDS), medical condition (including cancer and genetic characteristics), genetic information, request for protected leave, marital status, sex, pregnancy, age (over 40), sexual orientation, gender, gender identity or expression, political affiliation, or any other characteristic protected by law. The Company will comply with all federal and state regulations and statutes pertaining to individuals with disabilities.

Monday-Friday with flexibility to mandatory overtime on Saturdays 1st shift - 5am-3:30pm - $19 2nd shift - 3:30pm-2am-$20 Essential Duties and Responsibilities • Assemble mattresses as outlined in established work instructions using a variety of pneumatic tools (e.g., c-ring hog-ring guns, staple guns, hot glue guns). This includes the assembly of Hot Melt Bond (HMB) units on the HMB machine; application of various, specified upholstered layers to HMB and open coil units; foam-encased pocketed coil units; application of specified upholstery layers; and final mattress assembly. Prepare and organize components for final assembly and restock raw materials at point of use. • Perform duties as outlined in established Job Safety Analysis and National Quality Standards and meet established hourly production goals. • Organize and/or stock raw materials in the work area, follow departmental housekeeping requirements, and leave the work environment and equipment clean at the end of shift. • Perform other duties as designated by a supervisor or manager. Functional/Technical Competencies Must be able to comprehend and follow work instructions, loading schedules and production tickets. Must be able to understand and follow verbal instructions; communicate with coworkers and management clearly and respectfully; and work in an ever-changing, fast-paced team environment. Competencies • Customer Focused • Process Oriented • Adapts to Change • Foster and drive continuous improvement • Team Player Job Factors/Work Environments Must stand and walk for a minimum of 8 hours per day or longer in overtime situations as required. Also must be able to lift heavy product or raw materials up to 120 pounds multiple times per hour during an 8-hour shift or longer in overtime situations to meet customer demand. Heavy loads must be team-lifted. A work pace that maintains integrity of make-to-order system is required. Safety-focused, fast-paced manufacturing plant engaged in Lean Manufacturing/Continuous Improvement. Work environment includes a clean and safe work area and exposure to high noise decibels, hot raw materials, fire-retardant materials, and limited chemicals. Personal Protective Equipment is required to be worn for any hazards and is supplied by the company. #450

Come Join Us! From apartments in New York to hospitals and stadiums in Dallas, libraries at prestigious universities to creating modern retail experiences, our teams contribute architectural glass and building products to projects that shape the way people live, work, heal, learn, and play. At OBE, the work of our employees truly matters. With over 6,500 employees, we operate more than 80 manufacturing and distribution facilities in five countries. You can see some of our favorite projects here. Start your journey with OBE and help us build the future. Assembler (1st Shift) FLSA: Non-exempt The Assembler for our Phoenix,AZ, metal project plant facility, isn't just a job - it's a starting point to an awesome career with a great company. We hire motivated individuals who want to grow with us. We will equip you with the knowledge and skills you need to succeed. We have an incredible track record of promoting from within at our facility. Opportunities to advance into higher roles of responsibility and pay are everywhere. You can be our next success story! What You'll Get To Do The Assembler plays a key role in the manufacturing of high-quality windows and glass products. This hands-on position involves assembling window systems, installing components, applying sealants, and inspecting finished units for quality. Assemblers work on flow line and bench production stations, contributing to a collaborative team environment where safety, precision, and quality are paramount. Set up production stations according to job specifications. Operate air-powered tools and departmental machinery to assemble components. Clean, seal, and apply weather stripping to windows and frames. Use tape measures, drills, and other tools to install hardware and glass. Fabricate and hang sashes. Perform quality checks on assembled products. Load and prepare items for shipping and production. Maintain a clean and organized work area. Follow company quality standards and standard operating procedures. Lead and support team efforts as needed. Participate in OSHA safety training and follow all PPE & JSA guidelines. Successful employees in this role must be able to perform each essential duty and responsibility at a satisfactory level. The requirements listed are representative of the knowledge, skills and/or abilities required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential duties of the job. What We Are Looking For High School Diploma or GED required. Basic reading, writing, arithmetic, and computer skills. Ability to read and use a tape measure accurately. Good work ethic with consistent attendance. Positive attitude and strong team collaboration skills. Bilingual in English/Spanish is a plus. Physical Requirements & Worksite Conditions Ability to lift, bend, twist, carry, walk, and reach frequently. Ability to lift/move 50+ pounds intermittently. Ability to stand and walk on a concrete floor, wearing steel-toed shoes with metatarsal guards and other safety equipment for eight to ten hours per day. Ability to work in a manufacturing environment without temperature or humidity control. Engage in pre-shift and mid-shift stretching routines. What OBE Offers You Benefits that benefit you - industry competitive benefits at the lowest cost to the employee Work-life balance - PTO and holidays, including floating holidays you can choose Compensation that rewards your hard work - A pay-for-performance culture with potential for annual raises and bonuses Training - We will equip you with the knowledge and skills you need to succeed OBE Privacy Policy OBE will not discharge or discriminate against employees or applicants for discussing, disclosing, or inquiring about their own or others' pay.

Moveras, LLC, is a leading remanufacturer of automotive transmissions, producing more than 30,000 units per year in 3 locations in the US and Mexico. Our mission is to deliver the industry's best quality, availability and customer service. We are committed to constant improvement based on LEAN manufacturing principles. We accomplish our goals with true teamwork. Our people are the source of our success, and we treat all teammates accordingly. We are currently seeking top talent to join our dynamic team. If you have a keen attention to detail, a passion for precision, and thrive in a fast-paced environment, we want to hear from you. At Moveras, we believe in investing in our employees and providing opportunities for growth in a collaborative, forward-thinking workplace. Join us and be part of an industry leader shaping the future of automotive remanufacturing. Summary: The Assembly Technician will be responsible for the assembly of transmission components. This position must have the ability to read, follow and interpret documents such as operating and maintenance instructions, and procedure manuals. While performing the duties of this job, the Assembly Technician is regularly required to stand for periods of time, and must also be able to regularly lift and/or move up to 50 pounds. Prior experience working in a manufacturing environment required. Essential Duties and Responsibilities Receives new and incoming transmission cores from disassembly Interprets, and follows manufacturer instructions to reassemble transmission to product specifications. Ensures the highest levels of quality in work. Assembles transmission unit using hand and air tools based on manufacturer specifications. Other duties may be assigned. Competencies: Strives to continuously build knowledge and skills. Follows through and meets commitments. Good at multitasking Detail oriented, and organized Supports organization and department goals and values. Completes tasks on time or notifies appropriate person with an alternate plan. Prioritizes and plans work activities, uses time efficiently. Demonstrates accuracy and thoroughness in work. Meets productivity standards; Completes work in timely manner. Observes safety and security procedures.

As an assembler, you are always responsible for process safety, reporting product quality, recording production weights, proper packaging, and storing finished goods in assigned location. An Assembler is also a team player. Always maintain a safe working atmosphere. Monitoring all work processes for safe working conditions. Practice proper working procedures. Report all violations in safety policies to the Production Supervisor. Maintain a clean working area. Complete all quality checks. Inform supervisor of any safety or quality issues. Complies with all company policies and procedures. Other tasks and duties as assigned. SKILLS & QUALIFICATIONS Able to read and understand work instructions. Able to work scheduled work hours along with occasional required overtime. Able to communicate effectively. Ability to read a tape measure will be very helpful. PHYSICAL REQUIREMENTS Bending, reaching, stretching, kneeling, and stooping. Standing for up to 8 hours at a time. REPORTING This position reports to the Production Supervisor. EOE, including disability/vets

Discover your exciting role An entry-level position in a production environment with some prior experience required. Responsibilities will include but not limited to assembling control devices (ie. Dampers-HD's, RHD's industrials, micro's- blast gates of all sizes, custom devices, etc… ) to meet the specification. Some previous knowledge of FTI's control device offerings is helpful but not required. Explore your tasks and responsibilities * Quality control of the components to assure parts are free of any imperfections; meet specification * Material gathering * Follows instructions, diagrams; blue prints to complete the task. * Use a combination of any number of tools, including punches, hammers, wrenches, cutters, clamps, calipers, pliers or welding equipment and other electric hand tools. * Keep work area clean and organized- 5's. * Comply with health, safety (including OSHA), and environment procedures. * Comply with Work Safe Work Secure Manual and understand Employee Company Policy Manual. * Communicate with Lead Person/Supervisor about any discrepancies. * Continue to learn and expand one's own capacity with this job by increasing knowledge and skill base. * Perform other various assignments per Lead Person or Supervisor instruction Show your expertise Minimum Education, Certifications, and Qualifications None Knowledge, Skills and Experience Personal Attributes * Independent * Dependable; determined, positive in demeanor * Attention to detail. * Team player * Good attitude Physical Demands * Frequent standing, sitting, and use of hands in this support role is required * Specific vision abilities required to include close vision, and ability to adjust focus * Occasionally perform physical activities including lifting (up to 50 lbs. unassisted) Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the production area is usually moderately loud. The Assembly Department is a sectioned off area of the production floor. Air tools, grinders and welders are utilized within the Assembly department. * Safety glasses and hearing protection are required when in the production area * PPE covering eyes and skin is required when welding or heat induced cutting * PPE covering hands and face is required when grinding * PPE specific to tasks being performed is required Solicitation We are not currently accepting third-party agency candidates for this position. Any agency candidate submitted to any employee of Exyte or TFS may be contacted by Exyte or TFS without obligation to the third-party agency. Employment Sponsorship Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor employment visas at this time. EEO Statement Exyte US, Inc. and its subsidiaries are proud to be an Equal Employment Opportunity employer that is committed to supporting an inclusive workplace where associates excel based on personal merit, qualifications, experience, ability, and job performance. We prohibit discrimination and harassment of any kind based on race, color, religion, age, sex (e.g., pregnancy, childbirth and related medical conditions, sexual orientation, gender identity), national origin, disability, genetic information, protected veteran status, or any other protected characteristic as outlined by applicable federal, state, or local laws. Contact: You want to be part of the Exyte team? We look forward to receiving your application! For further questions and information, please do not hesitate to contact via E-Mail at ********************** Please note that we only consider applications submitted through our application portal. Applications sent via email will not be considered due to data protection regulations.

What We Do FOX Factory designs, engineers, manufactures and markets performance-defining products and systems for customers worldwide. Our premium brand, performance-defining products and systems are used primarily on bicycles, side-by-side vehicles, on-road vehicles with and without off-road capabilities, off-road vehicles and trucks, all-terrain vehicles, snowmobiles, specialty vehicles and applications, motorcycles, and commercial trucks. Some of our products are specifically designed for and marketed to a variety of leading cycling and powered vehicle original equipment manufacturers ("OEMs"), while others are distributed to consumers through a global dealer and distribution network. Fox Factory Holding Corp. is the holding company of FOX Factory, Inc. and is publicly traded (FOXF) on Nasdaq. Why you should join us Not only do we provide competitive wages, you will also have access to great benefits and employee discounts. But more importantly, it's a fun environment where we truly enjoy working as a team and bringing great products to our customers! If this sounds like something you would love to do, and a place you want to be a part of, get in touch with us by submitting your application. We look forward to hearing from you! Position Summary: Assembles and installs after-market suspension packages, active exhaust systems or tips and side-steps. Position Responsibilities: * Installs Front and Rear End after-market packages including off-road suspension systems, performance handling suspension systems, active exhaust systems or tips, side-steps and much more. * Prepares work to be accomplished by studying assembly instructions, blueprint specifications and parts lists; gather parts, subassemblies, tools and materials. * Assembles suspension components by examining connections for correct fit, fastening parts and sub-assemblies. * Positions parts and sub-assemblies by using work instructions, templates or reading measurements. * Verifies specifications by measuring completed component. * Ability to read and comprehend written instructions and information. * Ability to thrive in a fast-paced environment and be quick to learn. * Excellent oral and written communication skills and work effectively with other co-workers. * Able to identify potential issues and resolve efficiently. * Escalates issues to lead/supervisor for resolution. * Under general supervision, exercise independent judgement. Work typically involves detailed checks by senior co-worker or supervisor. Specific Knowledge, Skills or Abilities Required: * Need to work well with others. * Able to learn new technology; Supercharger assembly. * Mechanical ability * Valid Driver's License. Position Qualifications: Education: * High school diploma or GED required. Experience: * 1+ yrs. prior experience preferred working experience in a manufacturing or manufacturing quality environment preferred. * Experience using mechanical inspection or power tools preferred. Work Environment and Physical Requirements: * Manufacturing Environment * Lift up to 50 lbs. regularly * Requires walking, standing, bending and lifting for long periods of time * Vision abilities required to validate and enter data on computer Disclaimer: This list does not represent all physical demands. Descriptions are representative of those that must be met by employee to successfully perform the essential functions of the job. Reasonable accommodation may be provided to enable individuals with disabilities to perform the job's essential functions. Note: FOX provides equal employment opportunities for all employees and applicants for employment without regard to race, color, ancestry, national origin, gender, gender identity, sexual orientation, marital status, religion, age, physical disability (including HIV and AIDS), mental disability, results of genetic testing, or service in the military, or any other characteristic protected by the laws or regulations of any jurisdiction in which we operate. We base all employment decisions -including recruitment, selection, training, compensation, benefits, discipline, promotions, transfers, layoffs, terminations, and social/recreational programs - on merit and the principles of equal employment opportunity. Fox offers an excellent compensation package and wide-ranging opportunities for professional development. Medical, Dental, Vision, Health Spending and Dependent Care Savings Accounts, Disability and Life Insurance benefit programs are available, as is a 401k plan with employer matching. Eligibility for all benefit programs is defined by the applicable plan document or employee handbook.

Ability to wear required PPE to fulfill shift duties: smock, hairnet, gloves, facemask, and safety glasses. Use hand tools, spot welders, microscopes, and other manufacturing equipment to assemble products using detailed documented procedures. Follow all policies, procedures, and drawings for accuracy and quality. Perform visual checks of product to assure quality. Identify non-conforming parts following documented procedures. Meet manufacturing output requirements while producing high quality products. Ability to work alone and with others in a team environment under minimal supervision to accomplish department goals. Must have strong problem solving, analytical skills, adaptability, and flexibility. Must have good computer skills (Microsoft Office, data entry, email) Good written and verbal communication skills Must be able to clearly read and write in English.

For more than 20 years TruStop has been providing products and services across a wide range of industry segments including Oil & Gas, Filtration, Fluid Processing, Aerospace, Medical and Defense. We pride ourselves on our teamwork, employee empowerment, and together our commitment towards the highest standards in the manufacturing industry. From initial concept through design, manufacture and test, TruStop continues to be a premier manufacturer catering to many domestic and international customers with extremely high-quality demands and expectations. Scope: The mechanical and electrical assembly job involves building complex products that combine both mechanical and electrical components. Assemblers must be able to follow detailed instructions, read and understand blueprints, drawings, and wiring schematics, use hand and power tools, and perform precise work within given times. Key responsibilities include assembling, testing, and troubleshooting electromechanical systems, which often requires hands-on experience, technical training, and strong attention to detail. Responsibilities: · Assembly and wiring: Assembling mechanical parts, wire harnesses, and executing point-to-point wiring. · Component installation: Installing electrical components like motors, sensors, switches, and connectors. · Blueprint interpretation: Reading and interpreting technical documents, such as blueprints, schematics, and wiring diagrams. · Testing and troubleshooting: Performing tests to verify functionality and troubleshooting issues with both mechanical and electrical systems. · Quality control: Inspecting components and assemblies for quality and conformance to specifications. · Documentation: Completing required documentation, such as test results and traceability records. Knowledge, Skills & Abilities: The incumbent must have proficient knowledge in the following areas: · Mechanical and electrical aptitude: A strong understanding of both mechanical and electrical principles. · Technical literacy: The ability to read and interpret complex assembly drawings, diagrams, and schematics. · Tool proficiency: Experience using a variety of hand tools, power tools, and measuring instruments. · Manual dexterity: Excellent hand-eye coordination for precision assembly and soldering. · Computer skills: Familiarity with basic computer programs for documentation and following instructions. · Communication: Must be able to communicate in English (both written and verbal) as it relates to the job. · Environment: Must be adaptable to a changing work environment, completing demands and demonstrate ability to adapt to frequent changes, delays and/or unexpected events. · Experience: Must possess 1 to 2 years (minimum) of general mechanical and/or electrical assembly experience. The incumbent must also demonstrate the following skills: · Operate a forklift and lifting devices for movement of parts and other equipment as needed. · Team building skills. · Problem solving skills · Effective verbal and listening communication skills · Responsible for keeping equipment and work area clean and orderly. · Time management skills The incumbent must also demonstrate the following personal attributes: · Maintains standards of conduct · Be respectful · Possess cultural and political awareness and sensitivity · Be flexible · Demonstrate sound work ethics Physical Requirements: · Standing - ability to stand for extended periods · Walking - ability to walk for extended periods within the work area · Lifting and carrying - ability to lift/carry up to 50 lbs · Hand and finger dexterity - constant use of hands and fingers for manipulation of parts Working Conditions: TruStop is a busy facility located in Tempe, with roughly 47,000 sq/ft of A/C manufacturing/assembly space. The assembly team will have to serve several product lines and projects during any given time frame, and may be diverted from one project to another throughout the course of a work shift requiring excellent organizational and time management skills to efficiently complete the required tasks

Job Description For more than 20 years TruStop has been providing products and services across a wide range of industry segments including Oil & Gas, Filtration, Fluid Processing, Aerospace, Medical and Defense. We pride ourselves on our teamwork, employee empowerment, and together our commitment towards the highest standards in the manufacturing industry. From initial concept through design, manufacture and test, TruStop continues to be a premier manufacturer catering to many domestic and international customers with extremely high-quality demands and expectations. Scope: The mechanical and electrical assembly job involves building complex products that combine both mechanical and electrical components. Assemblers must be able to follow detailed instructions, read and understand blueprints, drawings, and wiring schematics, use hand and power tools, and perform precise work within given times. Key responsibilities include assembling, testing, and troubleshooting electromechanical systems, which often requires hands-on experience, technical training, and strong attention to detail. Responsibilities: · Assembly and wiring: Assembling mechanical parts, wire harnesses, and executing point-to-point wiring. · Component installation: Installing electrical components like motors, sensors, switches, and connectors. · Blueprint interpretation: Reading and interpreting technical documents, such as blueprints, schematics, and wiring diagrams. · Testing and troubleshooting: Performing tests to verify functionality and troubleshooting issues with both mechanical and electrical systems. · Quality control: Inspecting components and assemblies for quality and conformance to specifications. · Documentation: Completing required documentation, such as test results and traceability records. Knowledge, Skills & Abilities: The incumbent must have proficient knowledge in the following areas: · Mechanical and electrical aptitude: A strong understanding of both mechanical and electrical principles. · Technical literacy: The ability to read and interpret complex assembly drawings, diagrams, and schematics. · Tool proficiency: Experience using a variety of hand tools, power tools, and measuring instruments. · Manual dexterity: Excellent hand-eye coordination for precision assembly and soldering. · Computer skills: Familiarity with basic computer programs for documentation and following instructions. · Communication: Must be able to communicate in English (both written and verbal) as it relates to the job. · Environment: Must be adaptable to a changing work environment, completing demands and demonstrate ability to adapt to frequent changes, delays and/or unexpected events. · Experience: Must possess 1 to 2 years (minimum) of general mechanical and/or electrical assembly experience. The incumbent must also demonstrate the following skills: · Operate a forklift and lifting devices for movement of parts and other equipment as needed. · Team building skills. · Problem solving skills · Effective verbal and listening communication skills · Responsible for keeping equipment and work area clean and orderly. · Time management skills The incumbent must also demonstrate the following personal attributes: · Maintains standards of conduct · Be respectful · Possess cultural and political awareness and sensitivity · Be flexible · Demonstrate sound work ethics Physical Requirements: · Standing - ability to stand for extended periods · Walking - ability to walk for extended periods within the work area · Lifting and carrying - ability to lift/carry up to 50 lbs · Hand and finger dexterity - constant use of hands and fingers for manipulation of parts Working Conditions: TruStop is a busy facility located in Tempe, with roughly 47,000 sq/ft of A/C manufacturing/assembly space. The assembly team will have to serve several product lines and projects during any given time frame, and may be diverted from one project to another throughout the course of a work shift requiring excellent organizational and time management skills to efficiently complete the required tasks

As an Assembler at NMG Aerospace, you will be responsible for fabricating and assembling a variety of different assemblies and supporting hardware, applying knowledge of assembly techniques, and using precision instruments, hand tools, power tools, machines, and equipment. Additionally, assemblers read and interprets blueprints, work orders, and related documentation to determine method and sequence of operations and dimensional and finish specifications. Finally, Assemblers assume responsibility for maintaining accurate inventory. Shift is Monday through Thursday 5:00 am to 2:30 pm and Friday 5:00 am to 9:00 am Essential Job Functions: * Assemble and calibrate production parts. * Able to locate and interpret assembly drawings and ATP's, specifications, and work instructions for requirements. * Fills out necessary paperwork, including travelers, pull sheets and forms for shipments. * Lifting of materials (30 lbs. minimum) and test manifolds. * Mix ingredients, primers, adhesives, and sealants according to specifications. * Trim, drill, ream, grind, sand, and finish parts using templates and hand tools as required. * Assure compliance with customer specifications and requirements including shipping details. * Meet customer and NMG goals of quality, OTIF and costs. * Proficient with E10 transactions and job-related dashboards, including part and job tracker. * Ability to assemble multiple products in a cell or across multiple lines as evident by training matrix. * Inspect all final products to ensure compliance with customer requirements including shipping details. * Help team evaluate trends of labor standards, costs, and process improvements. Additional Duties: * Provide support for Lean manufacturing and continuous improvement initiatives, companywide. * Other duties, reporting, special assignments, or projects as needed and assigned. * Must remain current with, and complete all required training as assigned. * Must adhere to Company Corporate EHS Policy and department, occupation, and task specific safety protocols, including but not limited to Personal Protective Equipment (PPE) requirements. Qualifications: * 1-2 years of manufacturing assembly experience required; 3+ years preferred in a regulated industry (aerospace). * Ability to meet deadlines and plan accordingly. * Strong technical and mechanical ability. * Basic computer skills * Good interpersonal skills. * Team and individually goal-oriented. * Experience with Continuous Improvement * Must submit to and satisfactorily pass any pre-employment screening required for employment with the Company. * Must take medical exams required by law, in conjunction with occupation specific activities, the physical work environment, and ongoing industrial hygiene sampling results. * Depending on assignment, may be required to use stairs, remain upright and/or seated for prolonged timeframes, intermittently reposition the body per various tasks performed, and use various tools and work-related supplies. * May be required to perform manual lifting activities, not to exceed a 40lb lift performed by one individual. Education: * High School diploma or GED. In addition to competitive wages, NMG is proud to offer a retirement savings plan with company matching opportunity, excellent health and wellness benefits including a $350 annual wellness allowance for assistance with personal health and fitness goals, can earn up to 5 weeks paid-time off, on the job training, education assistance, and a variety of other supportive programs to meet our team member's needs.

Nammo Defense Systems Inc., a defense contractor, manufactures and supports shoulder-fired systems; energetic material solutions such as aircraft emergency escape systems, actuation devices, rocket motors, warheads, medium & large caliber ammunitions, mortar ammunition; and composite solutions including carbon fiber tubes and composite aero-structures. How you will be rewarded as an Energetic Assembler * Medical, Dental, Vision, STD. LTD, 401k, employee assistance programs, health savings account * Generous paid time off plan and holiday pay * Work week Monday - Thursday 4 - 10-hour days OFF Fridays What you will do as an Energetic Assembler * Perform basic assembly and test functions utilizing mechanical skills, hand and power tools, mechanical/electronic tools, test equipment, assembly fixtures and inspection measurement equipment in a production environment. * Regularly handles hazardous and non-hazardous materials as part of the manufacturing process. (i.e. - Solvents, explosives, etc.) * Work requires the ability to read and understand Standard Operating Procedures (SOP) and Process Specifications (PS) to operate and setup machinery and related systems. * This position is responsible for ensuring the safe processing of products that meet customer and NDS quality requirements in accordance with time standards for his/her assigned area of production. * Performs general daily housekeeping and cleaning of equipment and area to ensure a safe working condition for all employees. * Performs general maintenance of equipment as required. * Able to recognize and report all operational variances as trained. * Must display competent dexterity to insure safe handling of explosive devices. * Weekend overtime may be required. * Performs minor set-up for specific equipment when required. * Must be able to wear and maintain Personal Protective Equipment (safety eyewear, FR coat and pants, conductive shoes and full-face air purifying respirator as required) What you need to qualify as an Energetic Assembler * Experience in Aerospace, Energetic or Manufacturing Assembly * 2 years manufacturing experience preferred. * High School diploma or General Education Diploma (GED) is required. * Ability to walk / stand 80% of the time. * Able to lift 5 lbs. constantly, 25 lbs. occasionally, and 50 lbs. infrequently. Above 50 lbs. with a team lift. * Must have the ability to understand and speak English, as well as read and write in English. * Ability to accurately read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. * Experience in manufacturing, assembly, and packaging. * Proficiency with Microsoft office products (Word, Excel, PowerPoint, Teams) preferred. * Ability to obtain and maintain an ATF Possessor license. * Ability to pass a background and drug test Note Due to US Export Control laws and regulations; applicants selected for employment must show proof of a U.S. Person status before employment may begin.

Nammo Defense Systems Inc., a defense contractor, manufactures and supports shoulder-fired systems; energetic material solutions such as aircraft emergency escape systems, actuation devices, rocket motors, warheads, medium & large caliber ammunitions, mortar ammunition; and composite solutions including carbon fiber tubes and composite aero-structures. How you will be rewarded as an Energetic Assembler • Medical, Dental, Vision, STD. LTD, 401k, employee assistance programs, health savings account • Generous paid time off plan and holiday pay • Work week Monday - Thursday 4 - 10-hour days OFF Fridays What you will do as an Energetic Assembler • Perform basic assembly and test functions utilizing mechanical skills, hand and power tools, mechanical/electronic tools, test equipment, assembly fixtures and inspection measurement equipment in a production environment. • Regularly handles hazardous and non-hazardous materials as part of the manufacturing process. (i.e. - Solvents, explosives, etc.) • Work requires the ability to read and understand Standard Operating Procedures (SOP) and Process Specifications (PS) to operate and setup machinery and related systems. • This position is responsible for ensuring the safe processing of products that meet customer and NDS quality requirements in accordance with time standards for his/her assigned area of production. • Performs general daily housekeeping and cleaning of equipment and area to ensure a safe working condition for all employees. • Performs general maintenance of equipment as required. • Able to recognize and report all operational variances as trained. • Must display competent dexterity to insure safe handling of explosive devices. • Weekend overtime may be required. • Performs minor set-up for specific equipment when required. • Must be able to wear and maintain Personal Protective Equipment (safety eyewear, FR coat and pants, conductive shoes and full-face air purifying respirator as required) What you need to qualify as an Energetic Assembler •Experience in Aerospace, Energetic or Manufacturing Assembly • 2 years manufacturing experience preferred. • High School diploma or General Education Diploma (GED) is required. • Ability to walk / stand 80% of the time. • Able to lift 5 lbs. constantly, 25 lbs. occasionally, and 50 lbs. infrequently. Above 50 lbs. with a team lift. • Must have the ability to understand and speak English, as well as read and write in English. • Ability to accurately read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. • Experience in manufacturing, assembly, and packaging. • Proficiency with Microsoft office products (Word, Excel, PowerPoint, Teams) preferred. • Ability to obtain and maintain an ATF Possessor license. • Ability to pass a background and drug test **Note** Due to US Export Control laws and regulations; applicants selected for employment must show proof of a U.S. Person status before employment may begin.

*LIMITED TIME OFFER $1000 BONUS* Who We Are National Assemblers, Inc is family-owned and the largest retail assembly company in the world, with over 10 Million products assembled for our customers last year. We are the trusted provider to the world's largest brands like Walmart, Amazon, Wayfair, Bass Pro Shop, and most importantly, to individual customers who trust us in their homes. We were awarded “Assembly Company of the Year” for 2022 all due to our hardworking technicians who have pride in all they do! We are also the fastest growing, with over 100 new management roles created and filled last year! If you have the will and the skill, we have the opportunities for you! Who You Are You love working with your hands to build products. You're the one all of your family and friends call to assemble their new treadmill or desk or mount their new TV. You have an entrepreneurial spirit and like the benefits and backing of a W2 organization. You enjoy independence and are self-motivated. You are a great communicator and enjoy interacting with customers. Customer satisfaction and high quality is your top goal when working. You're a problem-solver and proactively seek solutions. You are reliable and have a proven attendance record. You're not afraid of hard work and enjoy a good challenge. If this sounds like you, we would love you to join our NAI team! Key Responsibilities Bed Warranty Repairs - Troubleshoot and fix mechanical or structural issues on various bed types Furniture Assembly - Assemble bed frames, desks, chairs, shelving units, and more Fixture Mounting & Installation - Install wall fixtures such as painting, mirrors, and other home fixtures securely TV Mounting & Installation - Mount, install, and setup TVs, ensuring secure placement and optimal viewing angles Entertainment System Installation & Setup - Install and configure home theater systems, soundbars, and streaming devices Provide top-tier customer service, educating customers on product use and maintenance Maintain accurate records of installations and repairs using company software Follow all safety and quality control procedures to ensure professional results What We're Looking For Experience in installation, assembly, or repair work (preferred but not required) Familiarity with entertainment and security system setup is a plus Mechanical aptitude and ability to use hand/power tools Strong attention to detail and problem-solving skills Excellent customer service and communication abilities Ability to lift and move heavy equipment (50+ lbs) Valid driver's license and clean driving record Benefits: Weekly Pay Medical/Dental/Vision Insurance 401K Paid Certification Program W-2 Employee The Fine Print *Limited Time Offer: Terms and Conditions Apply* NAI pays our “in-home” techs competitive earnings per piece being paid for every completed project. Our focus is on efficiency, quality, and safety above all else! Your will and your skill will enable you to determine the pay you desire for yourself. Our dedicated team will give you all the tools and training necessary to unlock your maximum potential. Full and part-time work is available, and jobs and schedules will vary depending on location. You will be a W2 employee (not a subcontractor!), meaning you will be trained, insured, paid appropriately for all hours, including overtime, and eligible for benefits. Start a Career that you Love with National Assemblers, Inc. APPLY NOW to start building your future with us! National Assemblers, Inc is an equal opportunity employer and does not discriminate against otherwise qualified applicants on the basis of race, color, creed, religion, ancestry, age, sex, marital status, national origin, sexual orientation, disability or handicap, veteran status and any state and local protected status.

Job DescriptionAssembly Technician Phoenix, AZ Just Staffing AZ is seeking an Assembly Technician to join our team in Phoenix, Arizona. As a leading staffing provider for the manufacturing and industrial sectors, we connect talented individuals like yourself with exciting opportunities to contribute to the production of high-quality products. In this temporary Assembly Technician role, you will be responsible for supporting our client's production operations by performing a variety of hands-on assembly tasks. Your primary duties will include operating machinery, following established protocols, maintaining quality control standards, and ensuring a safe work environment. We're looking for individuals with strong manual dexterity, attention to detail, and the ability to follow instructions effectively. To qualify, you should have some experience in a similar assembly or manufacturing position, though entry-level candidates are encouraged to apply. A high school diploma or equivalent is preferred. You'll thrive in this role if you enjoy working in a fast-paced production setting and take pride in contributing to the creation of quality products. If you're interested in joining our team and contributing to the success of our client's operations, we encourage you to apply today. Just Staffing AZ is an equal opportunity employer and is committed to providing a diverse and inclusive work environment.

Responsibilities: • Assembly: Cut, strip, crimp, solder, and terminate wires and connectors per IPC-620 workmanship standards. • Documentation: Interpret and follow assembly drawings, wire lists, BOMs, schematics, and work instructions. • Testing: Perform continuity and functional tests using fixtures and meters to ensure quality. • Preparation: Prepare wires, tinning, and apply epoxies/adhesives as needed. • Tool Operation: Use hand/power tools, crimp presses, wire twisters, and test equipment. • Quality: Maintain high-quality workmanship, applying identification and labels. • Environment: Keep work area clean, safe, and organized. • Collaboration: Work with engineers/supervisors to resolve issues. Act as subject matter expert for all aspects of 620 compliance. Requirements: • Proven experience in cable/wire harness assembly. • Strong knowledge or certification in IPC/WHMA-A-620 standards (Class 2 or 3 often required). • Proficiency in soldering (RoHS/non-RoHS, leaded/lead-free) and crimping. • Ability to read and interpret complex technical drawings, schematics, and BOMs. • Familiarity with electrical testing equipment (continuity testers, etc.). • Detail-oriented, with strong manual dexterity and hand-eye coordination. • Experience in aerospace, defense, or medical fields (often preferred). Desired Skills: • J-STD-001 and/or IPC 620 certification or equivalent experience; lapsed certification within 4 years may be acceptable. • Experience with AS9100 or ISO 13485 quality systems. • Ability to work independently and in a team.

Performs basic and intricate electronic/electro-mechanical assembly functions on prototype and production type hardware according to company workmanship standards and military or client specifications. Assists in the development and wiring of engineering models and in the development of assembly methods and wire lists. Uses hand or power tools to trim, shim, cut, and make other adjustments to fit components together and align them properly. May assist in instructing and training lower-level assemblers. Reads and interprets wiring lists and assembly drawings to work orders using work instructions. May perform any rework from test failures in accordance with standard repair procedures and may set up and operate automated assembly equipment. At the most senior level may serve as a team leader providing training to new staff and evaluating the performance and finished work of assigned staff. Essential Duties and Responsibilities include, but are not limited to: Determine Detail/Hardware locations per blueprints and mylars Set-up and operate Drill Press, Pneumatic drills, “C” squeezes, Hand Squeezes, Rivet Pullers. Set up countersinks per fastener requirements and shop router Monitor and work with very tight tolerances Drill holes in structure and subassemblies, and attaches brackets, hinges, or clips to secure installation or to fasten subassemblies per blueprint and customer specifications. Install units, parts, equipment, and components in structural assembly, according to blueprints and specifications, using hand tools and power tools. Bolt, screw, or rivet accessories to fasten, support, or hang components and subassemblies. Locate and mark reference points and holes for installation of parts and components, using jigs, templates, and measuring instruments. Inspects and tests installed units, parts, and equipment for fit, performance, and compliance with standards, using measuring instruments and test equipment. Position and align subassemblies in jigs or fixtures, using measuring instruments, following blueprint lines and index points. Complete all required training and any additional training required by supervisor. Complete quality documentation Perform preventative maintenance on assembly presses and tooling Verify part and hardware count to shop router Other duties as assigned Qualifications: Experience and Education: 0-1 years of relevant experience High school degree or equivalent Technical Skills: Excellent attention to detail Strong hand-eye coordination Ability to read, understand and interpret engineering drawings and specifications (e.g., blueprint reading, specification, change, design). Working knowledge of aircraft manufacturing, instructions and blueprints Working knowledge of customer specifications and requirements Ability to use calipers, micrometers, etc. Mastery of basic math (addition, subtraction, multiplication, division, and fractions) Strong teamwork and communication skills to get along with co-workers and be a team player Understand and obey safety requirements Commitment to keep work area clean and free of debris Physical Requirements: Must be able to lift and/or move up to 50lbs Specific vision abilities include close and distance vision, depth perception and ability to adjust focus Ability to use hands to finger, handle, or feel, as well as reach with hands and arms for extended periods of time Capable of standing for long periods Supervisory Responsibilities: None. Travel Required: N/A Note: This job description in no way states or implies that these are the only duties to be performed by the employee(s) of this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the employee(s) will possess the skills, aptitude, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety to themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an at will relationship. Affirmative Action/Employment Opportunity (EEO) Statement: ALIGN PRECISION is an equal opportunity employer and values diversity at our company. We are committed to creating a workplace where all qualified individuals are welcome and can thrive, regardless of race, religion, color, national origin, gender, sexual orientation, gender identity, age, marital status, veteran status, disability status, or any other characteristics protected by law.