Assembler jobs in Mountain View, CA

@HYVE Solutions, missions to help customers, business partners, and employees achieve success through shared goals, strategies, resources and technology solutions. Responsibilities: • Performs product assembly operations on complex components, assemblies or sub-assemblies. • Follows methods and sequence of operations in performing unpacking, component preparation, component installation and assembly of units. • Sets up and operates automatic or semi-automatic machines. • Provides hands on job function training to coworkers as needed. • Open and unpack chassis and components to be used on the server assembly • Utilize small hand tools to or power screwdrivers to Install/replace brackets, Install small components and/or labels on servers • Assist with recycling materials • Any other tasks assigned Requirements: • Ability to regularly lift and/or move up to 50 pounds • Ability to stand for a prolonged period • Ability to work on ladders • Manual dexterity • Works under close supervision • Must be able to effectively work within a team environment • Communicate and can follow verbal/written directions Hourly Pay rate range: $19.50-$21.00 Closing date: 10/30/24 @ HYVE Solutions, we believe employees are our greatest asset and we empower them to make a difference in our business. Diversity and inclusion make us all better. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

Primary Duties & Responsibilities Clean optical components under microscope Set up optical alignment stations Manually handle, align and install diverse optical components using adjustment fixtures while monitoring diverse optical parameters, and continue to adjust alignment optimize and balance all optical parameters until these parameters reach optimal and meet specs. Do optical performance test for WSS optical assembly Apply and cure UV glues to fix optical components Inspect own work according to quality specifications Produce work that meets workmanship standards and strict quality criteria Perform incoming inspections Cross-trained for upstream and downstream operations Load and unload alignment stations Correctly enter numerical data Documentation and communication of suggestions for continuous improvement Maintains a good record concerning absenteeism and tardiness Education & Experience High school diploma or equivalent preferred Basic reading and math skills (add, subtract, multiply and divide) 3+ years of experience in fiber optics related field Experience in optical alignment and assembly using fixtures, hand tools and test equipment preferred Demonstrated ability to work in a team based environment Demonstrated ability to achieve results independently and work with others Ability to recommend and implement improvements Good interpersonal and communication skills Skills Good manual dexterity Ability to visually inspect optics for cleanliness/defects using a microscope Ability to clean optical components Ability to manually handle, align and install diverse optical components Ability to monitor diverse optical parameters and to align optical components to optimize and balance all optical parameters until these parameters reach optimum and meet specs. Ability to provide feedback in the development of new processes, tools and techniques working with the Engineering team Ability to work independently with minimal guidance from the supervisor Ability to solve problems & make correct decisions in short timeframes, oftentimes with minimal supervision Ability to excel in a cross-organizational, cross cultural, global team environment Handle special assignments with speed and effectiveness Working Conditions R&D engineering lab and manufacturing cleanroom Physical Requirements Able to wear plastic/latex gloves or finger cots. Safety Requirements All employees are required to follow the site EHS procedures and Coherent Corp. Corporate EHS standards. Quality and Environmental Responsibilities Depending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System. Culture Commitment Ensure adherence to company's values (ICARE) in all aspects of your position at Coherent Corp.: Integrity - Create an Environment of Trust Collaboration - Innovate Through the Sharing of Ideas Accountability - Own the Process and the Outcome Respect - Recognize the Value in Everyone Enthusiasm - Find a Sense of Purpose in Work Coherent Corp. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or an accommodation due to a disability, you may contact us at ****************************** .

Assembly Operators are responsible for the assembly of medical components, subassemblies, products, or systems. Every team member is responsible for maintaining housekeeping and organization of the work area as well as following CathX Medical policies and procedures. This role complies to FDA QSR (21CFR 820), ISO 13485 requirements and adheres to the Quality Management System (QMS). High School Diploma or equivalent work experience in the medical device industry Experience - 0-2 years Knowledge of Good Manufacturing Process and Good Documentation Practice Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. Must have the ability to calculate figures and amounts using basic math (i.e. decimals, addition, subtraction, multiplication and division). Ability to use measurement tools like microscopes and pin gauges and to compare measurements to documented standards. Skills Good Manufacturing Process and Good Documentation Practice Good written and verbal communication skills Understands SOP's, MPI's and Work Instructions Adherence to EH&S requirements Basic Math Knowledge: Add, Subtract, Multiply Whole Numbers & Decimals Assemble Small Parts Under a Microscope General Catheter Assembly Under a Microscope Coil Winding Laser Welding Swaging Flaring General Inspection Packaging Labeling Competencies To perform the job successfully, an individual should demonstrate the following competencies: Values: Integrity, Accountability, Teamwork, Innovation Good verbal and written communication skills Ability to work independently Ability to manage tight timelines and changing priorities Demonstrate a quality culture within the team, ensuring that procedures and work methods for the area are accurate and fully complied to Willing to be flexible and accommodating to meet the business need across shifts, while open to learning, and training in new processes as required Demonstrated ability to work in a team and possess a positive communication style Salary Range - $22.00/hr - $28.00/hr Reads work orders, follows production drawings and sample assemblies, or receives verbal instructions regarding duties to be performed. Ability to perform and demonstrate all Manufacturing procedures after training. Accurately complete all essential documents (i.e., Lab Notebooks, Device Master Records (DMR's), Lot History Records (LHR's), Inspection Records and Validation Documentation). Positions and aligns parts in specified relationship to each other in jig, fixture, or other holding device. Crimps, stakes, screws, bolts, rivets, welds, solders, cements, press fits, or perform similar operations to join or secure parts in place. Performs intermediate assembly tasks, such as pad printing, adhesive bonding, hot air bonding, balloon bonding, etching wires, swaging shafts, fusing skiving shafts, folding, marking, braiding, coiling, and perform leak testing. Adjusts and trims materials from components to achieve specified medical or dimensional characteristics. Performs online go-not-go testing and inspection to ensure parts and assemblies meet production specifications and standards. Packages finished assemblies or subassemblies in clear plastic bags. Meeting the daily goals and standards

Based in Mountain View, CA., NeuroPace is a commercial-stage medical device company focused on transforming the lives of people suffering from epilepsy by reducing or eliminating the occurrence of debilitating seizures. Its novel and differential RNS System is the first and only commercially available, brain-responsive platform that delivers personalized, real-time treatment at the seizure source. At NeuroPace, employees are our greatest asset. We are continually searching for solution-oriented individuals who can bring energy and creativity to our growing workforce. At NeuroPace, our success depends upon our ability to recruit and retain the most talented, enthusiastic and dedicated people we can find and providing them with a dynamic and challenging environment in which to thrive. We are currently seeking a Manufacturing Assembler to join our team. Duties include a variety of mechanical manufacturing operations on implantable leads and electro-mechanical assemblies or sub-assemblies. Execute work assignments per documented procedures and in conformance with Company Standard Operating Procedures (SOPs). This position will need to be located on-site in our Mountain View Headquarters, five days a week 6am-2:30pm shift. It will be a temp-to-perm position until the individual is completely signed off. Key Responsibilities Execute pre-determined work assignments in support of manufacturing objectives. Including but not limited to: Assembly of RNS products and implantable leads using small hand tools, microscopes, and various fixtures. Performing soldering operations using soldering equipment. Performing welding operations using Laser Weld and Resistance Weld equipment. Performing laser marking using laser equipment. Performing tensile testing using Instron Pull tester equipment. Performing electrical tests using automated test equipment. Performing sterile and finished goods packaging using tray sealing equipment. Operation of transfer press equipment used for rubber molding. Accurately follows all applicable manufacturing documentation in the assembly and testing of product. Work with supervisor, engineers, QA staff, and project managers to develop and document manufacturing processes and procedures Prior to executing work steps, ensures that all appropriate training has been received and documented. Ensures that all tasks are executed in accordance with NeuroPace Quality System requirements and Good Manufacturing Practices. Requirements Minimum 2-5 years device manufacturing experience, preferably in medical device manufacturing. Ability to read and follow production/assembly instructions. Moderate experience in manufacturing and/or clean room environments. Ability to communicate verbally and in written format effectively and clearly in English. Solid understanding of the QSR, cGMP, ISO, & OSHA regulations that affect the production floor. Ability to work with minimal supervision, uses good judgment, and takes initiative to meet production requirements. Ability to interact with necessary support personnel (ME, QE, QA, Materials, etc) to ensure effective operations in production areas. Must have the ability to maintain the physical condition, mental attention and stamina needed to perform assigned duties and responsibilities. This position requires a high level of hand-eye coordination, manual dexterity, and attention to details, tenacity and focus over prolonged periods of time. Some or all of the work may be in a high volume and regulated manufacturing controlled environment. Salary $26.00-$30.00 an hour Benefits Medical, Dental & Vision Insurance Voluntary Life 401K RSU 529 plan ESPP Program Health & Wellness Program Generous Paid Time Off plus eleven paid holidays FSA & Commuter Benefits NeuroPace is proud to be an equal opportunity employer and values the contributions of our culturally diverse workforce. San Francisco and Los Angeles applicants: The Company will consider for employment qualified applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance in Hiring Ordinance or the San Francisco Fair Chance Ordinance (as applicable) PRIVACY NOTICE: NeuroPace takes its responsibility to protect your personal information seriously, and it uses reasonable safeguards to avoid unauthorized use or disclosure of it, and inadvertent loss or impermissible alteration of it. NeuroPace complies with all applicable federal and state laws and regulations that govern the handling of your personal information. If you would like more detailed information on NeuroPace's privacy policies, please refer to neuropace.com/privacy/ for reference. NeuroPace retains candidate resumes and applications in its files for future reference and/or consideration for other available job postings. If you do not wish for your resume and applications materials to be retained in NeuroPace files, or wish to obtain a listing of any personal information that NeuroPace has stored about you, please contact us at privacy@neuropace.com.

ABOUT US: Neptune Medical is an innovative and ambitious venture capital funded Silicon Valley medical device start-up. We have already commercialized novel medical devices using our Dynamic Rigidization™ technology. Now we are building something truly unique: A fully flexible medical robotic platform (Triton) intended to replace much of manual endoscopy. We believe our technology will be the standard in endoluminal robotics for decades to come. TITLE: Manufacturing Assembler or Technician (I/II/III), Endoscopy POSITION SUMMARY: As a Manufacturing Assembler/Technician, Endoscopy, you will be supporting product manufacturing and some process development activities. The ideal candidate would act with passion and intensity in a medical device start-up that is fast paced and collaborative and display the ability to perform to the requirements outlined below. For the right person, this position will be a tremendously exciting and career-defining opportunity, making core contributions to a genuinely new type of medical robotic platform. ROLES AND RESPONSIBILITIES Build medical devices that can be used for design and manufacturing optimization and, ultimately, human trials. Ability to reliably follow instructions and work with minimal supervision. Ability to work in controlled environments. Investigate assembly issues and assist engineering in documenting and implementing process improvements. Follow assembly and test protocols to help characterize new processes. Comfortable supporting multiple sub-assembly builds Utilize small hand tools and/or precision devices and microscopes to aid in prototyping and testing. Keep work area, equipment and materials clean, organized and properly identified. QUALIFICATIONS Minimum 3-5 year working in the medical device industry High school diploma or GED Excellent assembly skills. Process medical devices per written documentation, approved operating procedures, SOP's, QIP's, LHR's and MPI's. Perform moderately complex inspections using simple hand or equipment measuring devices. Such as (Calipers, Leak Testers, Drop Gauges) Read and follow SOPs as to start-up, and operation of production equipment Familiar with manufacturing processes such as applying adhesive, UV curing, Die Bonding and cutting techniques. Positive demeanor with a strong work ethic and desire to be a big part of a growing organization. Good communication skills - ability to communicate in English orally and via writing. Neptune Medical is located in Burlingame, CA, near the Millbrae Caltrain and BART Station. Our job titles may span more than one career level. The starting hourly rate for this role is between $32 to $38 depending on experience. The actual base pay is dependent upon many factors, such as: education, training, transferable skills, work experience, business needs, and location. The base pay range is subject to change and may be modified in the future. This role may also be eligible for equity, benefits and 401(K) with matching. Neptune Medical provides equal employment opportunities to all applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Neptune Medical, is an innovative, venture capital funded medical device startup headquartered in Burlingame, CA. We have already commercialized novel medical devices using our technology. Now the team at Neptune is building something truly unique: a fully flexible medical robot that enables doctors to reach deep into human anatomy. Triton Robotic Endoscopy will disrupt flexible endoscopy and set a new standard in outcomes for decades to come. TITLE: Manufacturing Assembler or Technician (I/II/III), Endoscopy POSITION SUMMARY: As a Manufacturing Assembler/Technician, Endoscopy, you will be supporting product manufacturing and some process development activities. The ideal candidate would act with passion and intensity in a medical device start-up that is fast paced and collaborative and display the ability to perform to the requirements outlined below. For the right person, this position will be a tremendously exciting and career-defining opportunity, making core contributions to a genuinely new type of medical robotic platform. ROLES AND RESPONSIBILITIES: Build medical devices that can be used for design and manufacturing optimization and, ultimately, human trials. Ability to reliably follow instructions and work with minimal supervision. Ability to work in controlled environments. Investigate assembly issues and assist engineering in documenting and implementing process improvements. Follow assembly and test protocols to help characterize new processes. Comfortable supporting multiple sub-assembly builds. Utilize small hand tools and/or precision devices and microscopes to aid in prototyping and testing. Keep work area, equipment and materials clean, organized and properly identified. QUALIFICATIONS: Excellent assembly skills. Process medical devices per written documentation, approved operating procedures, SOP's, QIP's, LHR's and MPI's. Perform moderately complex inspections using simple hand or equipment measuring devices. Such as (Calipers, Leak Testers, Drop Gauges). Read and follow SOPs as to start-up, and operation of production equipment. Familiar with manufacturing processes such as applying adhesive, UV curing, Die Bonding and cutting techniques. Positive demeanor with a strong work ethic and desire to be a big part of a growing organization. Minimum 3-5 year working in the medical device industry. High school diploma or GED. Good communication skills - ability to communicate in English orally and via writing. Neptune Medical is located in Burlingame, CA, near the Millbrae Caltrain and BART Station. Our job titles may span more than one career level. The starting hourly rate for this role is between $32 to $38 per hour depending on experience. The actual base pay is dependent upon many factors, such as: education, training, transferable skills, work experience, business needs, and location. The base pay range is subject to change and may be modified in the future. This role may also be eligible for equity, benefits and 401(K) with matching. Neptune Medical provides equal employment opportunities to all applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description MECHANICAL ASSEMBLER Job Purpose: Responsible for performing a wide variety of electronic or electro-mechanical assembly operations on assemblies or sub-assemblies. Determines and/or follows methods and sequence of operations in performing wiring, component installation, hand soldering and cable harnessing on assembly units; box build. Makes setups and adjustments holding tolerances to blueprint specifications. Key Responsibilities: 1 Performs highly routine and respective production activities. 2 Loads materials and unload products from production line and equipment. 3 Understands and adheres all safety procedures. 4 Informs appropriate personnel of material and equipment problem. 5 Maintains simple logs of completed work. 6 Knows your customer's expectations and drive section to meet them. 7 Performs related work as required for repair/rework BGA. 8 Strong hands-on experience in Surface Mount Technology, Pin-Through-Hole 9 Reads work instruction and C-CAM Job Qualifications: Education: Secondary, High School Experience: 2+ years manufacturing experience Required Skill: Repair/Knowledge in SRT Machine (BGA Rework). Job Competencies (define specific behaviors required by job) 1. Attention to detail 2. Judgment 3. Team work FabrinetWest including its subsidiaries, is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, national origin, sex, sexual orientation, gender identify, age, disability, genetic information, veteran status, or any other characteristic protected by law.

+ Looking for Electromechanically system level build and troubleshooting experience. **Responsibilities:** + Maintain tool schedules, complete alignment processes (milestones) per defined test times - work assignments that are moderately complex in nature where judgment is required in resolving problems. + Support tool progression priorities -tests and troubleshoots assemblies and/or final systems. + As required, prepares technical reports summarizing findings and recommending solutions to technical problems. + Maintain test tooling, sending/receiving tooling to complete daily work activities (3rd party calibration). + Performs the build, calibration, testing and troubleshooting of mechanical assemblies at a system level. + Determines and may develop test specifications, methods and procedures from blueprints, drawings and diagrams. c. Tests and troubleshoots assemblies and/or final systems. May complete rework on assemblies and/or systems as a result of testing. + Prepares technical reports summarizing findings and recommending solutions to technical problems. May assist in the selection and set-up of specialized test equipment. + Requires experience in testing digital and/or analog systems. + Ability to read complicated drawings, mathematics, handbook formulas, and a variety of testing and measuring instruments. + Lift 50 lb requirement **Experience:** + Typically requires a minimum of 2 - 4 years of related experience. + Looking for a person with strong mechanical, electrical and software sills. + NOT looking for PCB experience/ board TS. More opto assembly BIG system level. + Looking for a person with strong mechanical, electrical and software sills. **Skills:** + Opto assembly BIG system level + Mechanical assemblies + Troubleshooting + Calibration **Education:** + An AA degree, military technical training or their equivalent vocational training is a +. Will accept HS diploma with equivalent experience. **About US Tech Solutions:** US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit *********************** (*********************************** . US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

**Be visionary** Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. **Job Description** **Secure the Future: Join Teledyne as a Mechanical Assembler-$3K Sign-On Bonus!** **Build technology that powers critical missions.** At Teledyne Microwave Solutions, we've spent over 50 years designing and manufacturing advanced RF and microwave components for aerospace, defense, and communications. Our products support applications from radar and space to electronic warfare and UAV systems. If you're ready to bring your assembly expertise to a team that values precision and innovation, join us as a Mechanical Assembler. **What you'll do** + Interpret schematics, drawings, and work instructions to assemble components + Use hand and power tools to fit, align, and secure parts in place + Perform intermediate testing and troubleshooting using tools like multimeters and oscilloscopes + Work on complex assemblies requiring manual dexterity and precision + Conduct soldering and inspection under a microscope when needed + Ensure quality checks throughout the manufacturing process + Record production data and maintain accurate logs + Provide basic training to lower-level assemblers + Follow safety procedures when handling chemicals and hazardous materials **What you need** + Strong mechanical assembly skills and attention to detail (required) + Ability to read technical documents and interpret instructions (required) + Experience using diagnostic tools and test equipment (required) + Vocational or technical certificate or equivalent experience (required) + Minimum of 8 years of assembly experience (required) + Knowledge of ISO/AS9100 standards and Lean principles (advantage) + U.S. Person status (citizen, permanent resident, asylee, or refugee) (required) **What we offer** + **$3,000 sign-on bonus** + Competitive salary and comprehensive health benefits + 401(k) with company match and retirement plans + Paid time off and flexible work arrangements + Professional development and training opportunities + A collaborative environment focused on innovation and growth **What happens next** Apply online through Teledyne's careers page. If your qualifications align, our team will contact you for interviews and guide you through the next steps. _Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status._ **Salary Range:** $42,800.00-$57,100.000 **Pay Transparency** The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, education/training, work experience, key skills, and type of position. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws. You may not realize it, but Teledyne enables many of the products and services you use every day **.** Teledyne provides enabling technologies to sense, transmit and analyze information for industrial growth markets, including aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, energy, medical imaging and pharmaceutical research.

Temp Job Responsibilities Shifts/ Pay: DAY- $23.50 SWING- $25.00 Follows procedures, instructions, and sequence of operations in unpacking, preparing components, installing components, and assembling units. Moves materials between production, warehouse, and other areas. Unpack and package production materials. Performs product assembly operations on complex components, assemblies, or sub-assemblies. This may involve integration of computer parts into a chassis on an assembly line. Utilize small hand tools or power screwdrivers to install brackets, small components, and labels on products. Installation of rails to elevation on rack specifications. Identify and scan labels for rack specification. Identify and label cables for rack specification using cable labeling machine. Cable racks and server components. Conduct various product and quality process inspections. Document inspection results by completing reports and inputting data into a quality database. Conduct daily audits of assigned areas, verify tools for proper torque and calibrations. Any additional assigned tasks. Job Skills Strong attention to detail. Ability to effectively work in a team environment. Effectively communicate and follow verbal and written instructions. Strong understanding and familiarity with manufacturing documentation. Physical Requirements Ability to regularly lift, push, and or move up to 50lbs. Ability to stand for a prolonged period. Ability to work on ladders. Manual dexterity. Job Types: Full-time, Contract, Temporary Pay: $25.50 - $27.00 per hour Expected hours: 40 per week Benefits: Dental insurance Health insurance Vision insurance Work Location: In person #EmploynetJobsSanJose 0.00

Job Description We are currently looking for experienced Auto Collision Journey Level Body Techs and Tear Down Disassembly and Reassembly Techs to join the Chilton Auto Body team at several of our San Francisco Bay Area locations. Come learn from the best and advance within the company. YOU MUST HAVE EXPERIENCE IN THE AUTO BODY COLLISION REPAIR INDUSTRY!! PLEASE REPLY BY INCLUDING YOUR RESUME!! Job Summary: Examine vehicles for collision-related damage and document the time and effort required to repair and refinish vehicles to pre-accident condition in accordance with industry standards and insurance company guidelines. Tear down and re-assembly of vehicles; welding with MIG and Spot resistance welders; replacing panels; straighten, grind, sand and fill repair panels; repairing frames and unibody using frame rack. Job Requirements: *Previous experience in automotive collision necessary (3+ years for A-tech level) and must have knowledge of automotive disassembly and reassembly. *I-CAR certifications not required, but are a plus *Must be detail oriented, organized, and have a high standard for quality *Must provide your own basic tools. *Must be eligible to work in the U.S. *Must agree to and pass a thorough background check. Benefits: *Paid holidays and 2 weeks PTO *Medical, dental, vision, life insurance *Matching 401(k) Pay Rate: $40-45 A-Tech; $30-40 B-Tech; $18-30 C-Tech Descripción del trabajo: Estamos buscando técnicos experimentados en desmontaje y montaje de colisión de automóviles para unirse al equipo de Chilton Auto Body en varias de nuestras ubicaciones en el área de la Bahía de San Francisco. Venga a aprender de los mejores y avance dentro de la empresa. Resumen de trabajo: Se debe examinar el vehículo en busca de daños relacionados con la colisión y documentar el tiempo y el esfuerzo necesarios para reparar y restaurar los vehículos a la condición previa al accidente de acuerdo con los estándares de la industria y las pautas de la compañía de seguros. Requisitos de trabajo: *Experiencia previa en colisión automotriz necesaria y debe tener conocimientos de desmontaje y montaje de automóviles. *Debe proporcionar sus propias herramientas básicas. *Debe ser elegible para trabajar en los EE. UU. Beneficios: *Días festivos pagados y 2 semanas de tiempo pagado para vacaciones o enfermedad *Médico, dental, visión, y seguro de vida *Igualdad de contribución al plan de retiro 401(k)

Akura Medical, a Shifamed Portfolio Company, is focused on a differentiated approach delivering an effective solution to address the major challenges of venous thromboembolism (VTE). Akura recently announced the first-in-human use of its mechanical thrombectomy platform. Each year VTE affects as many as 900,000 Americans, resulting in about 100,000 premature deaths. To learn more about Akura Medical, please visit ***************** ABOUT SHIFAMED Founded in 2009 by serial entrepreneur Amr Salahieh, Shifamed LLC is a privately held medical device innovation hub focused on the development of novel medical products to address clinical needs in the rapidly evolving fields of cardiology and ophthalmology. Description: Performs a variety of mechanical prototype, sub-assemblies, final assemblies and finished device. Works from diagrams, drawings, work instructions, SOPs and in accordance with GMP regulations. Makes continuity checks on work in process and completed. Brings abnormalities to the attention of supervisors in a timely manner. May conduct quality inspections on processing line in accordance with quality specifications. Responsibilities, Skills & Hands-On Experience: Assemble components into medical devices (catheters, consoles, accessories) in accordance with approved manufacturing procedures. Utilize small hand tools, calibrated instruments, measurement equipment, microscopes, and test fixtures. Perform in-process quality checks on sub-assemblies and finished product. Work with engineers and technicians to resolve line issues and suggest improvements. Maintain cleanroom integrity via proper gowning techniques and adherence to cleanroom environment practices and procedures. Complies with Standard Operating Procedure requirements. Meets quality standards and performs basic measurements. Completes documentation in an accurate and comprehensive manner Adhere to general safety rules, manufacturing procedures, company policies and procedures and FDA regulations. Maintains a clean and organized work area. Performs duties in a safe manner while adhering to safety policies. Cross-train new team members. Education & Work Experience: High School diploma or equivalent, preferred. Minimum 4 years of experience in medical device industry Ability to read and write and English Ability to utilize basic math skills. Ability to use pin gauges, digital calipers, snap gauges, digital micrometers and be able to determine Min Max of dimensions. Ability to solder wires and small parts is a plus Familiarity with or experience with hot boxes, UV cure stations, laminators, braiding machines, soldering stations, 3D printing, electropolishing, laser welding, laser cutting, and/or leaking testing is a plus Ability to work well under pressure and to meet multiple and occasional competing deadlines while maintaining a cooperative working relationship with other employees and supervisor. Our salary ranges are calculated by role, level, and location. Please note that your position within that range will be determined by your job-related knowledge, location, skills, experience, relevant education, and training/certifications. The hourly rate for this full-time, temporary, position is between $32 - $35/hour. NOTICE TO CANDIDATES: Please be aware that Shifamed and its portfolio companies do not conduct interviews or extend offers through mobile web chat applications. Please report any such occurrences to ***************.

Title: Senior Assembly Support Department: Operations FLSA Status: Non Exempt Level: S3 Range: $26.54 - $39.23 Comtech Telecommunications Corp. is a leading global technology company providing terrestrial and wireless network solutions, next-generation 9-1-1 emergency services, satellite and space communications technologies, and cloud-native capabilities to commercial and government customers around the world. Our unique culture of innovation and employee empowerment unleashes a relentless passion for customer success. With multiple facilities located in technology corridors throughout the United States and around the world, Comtech leverages our global presence, technology leadership, and decades of experience to create the world's most innovative communications solutions. For more information, please visit **************** We're seeking curious, growth-minded thinkers to help shape our vision, structures, and systems; playing a key role as we launch into our ambitious future. If you're invigorated by our mission, values, and drive to change the world - we'd love to have you apply. Purpose: Responsible for performing a wide variety of electronic or electro-mechanical assembly operations on assemblies or sub-assemblies. Determines and/or follows methods sheets and assembly drawings in performing wiring, component installation, hand soldering and cable harnessing on assembly units or receives verbal instructions regarding duties to be performed and interpret a variety of instructions furnished in written or verbal form. Responsibilities: * Assemble power supplies, sub-assemblies (transformers, EMI box, etc.) controllers, TWTAs, KPAs, SSPAs, and other electrical equipment. * Assembles mechanical components including soldering and crimping * Identify and rework defects * Read and understand Assembly Instructions * Use small hand tools, magnifying lamps, microscopes, rulers and calipers * Read and understand Change Orders and assembly prints * Understand component identification * Assemble mechanical hardware * Performs inspection of all materials and documentation prior to performing assigned tasks. * Ensures tooling and test equipment used is properly calibrated. * Performs other duties and responsibilities when required. * Multi-task and adjust quickly to high paced teamwork environment Skills: * Ability to read and interpret documents * Solve practical problems Requirements: * To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education: * High School diploma. Experience: * Candidate must have a minimum of five (5) years' experience in the electronic manufacturing industry with emphasis on mechanical assembly capabilities. * MS Windows Comtech Telecommunications Corp. is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability protected veteran status or other characteristics protected by law.

Viridi Parente is a disruptive energy company. We deliver solutions to tomorrow's problems, today. We develop and manufacture battery pack technology for mobile and energy storage applications. We deliver customer-focused solutions, blending environmentally conscious products with a bottom-line mentality. Viridi is headquartered in Buffalo, NY and is excited to be currently expanding into the Richmond, CA area. **This position will work 5 AM - 1:30 PM PST** The Role: We are looking for an Assembly Associate with a genuine passion for excellence and a desire to work in a fast-paced, entrepreneurial company. The ideal candidate will have experience in light or medium assembly operations. This individual will be mechanically inclined with high energy and a passion to learn new skills. Previous assembly experience preferred but we are willing to train qualified individuals. Job Responsibilities: Perform assembly of electrical components in both a manual and semi-automated environment. Performs electrical and mechanical installations on machines and other equipment. Produces components by assembling parts and subassemblies Positions and/or aligns components and parts, either manually or with hoists. Uses hand tools or machines to assemble parts. Assembles components by examining connections for correct fit, fastening parts and subassemblies. Examining connections for correct fit, fastening parts and subassemblies. Keeps equipment operational by completing preventative maintenance requirements, following manufacturer's instructions, and calling for repairs. Read and decipher assembly instructions. Interprets technical documents, such as diagrams, and/or other verbal or written instructions. Conducts quality control checks as required to ensure correct assembly. Documents actions by completing productions and quality forms. Identifies any defective items and handles them according to established procedures. Participates in daily shift meetings. Participates in continuous improvement initiatives. Maintains a safe and clean working environment by complying with procedures, rules, and regulations. Adhere to company accountability standards pertaining to attendance, safety, and workmanship Attend training as required and perform other related duties as assigned. Qualifications: High School Diploma or equivalent, strongly preferred Mechanically inclined with great problem-solving skills Ability to read and follow detailed assembly instructions. Ability to work in a manual assembly operation and willingness to cross train and learn new tasks. A basic understanding of AC/DC currents, strongly preferred Identification of AC/DC designation and of wire coding, strongly preferred. Works well independently and with others. Organized with attention to detail. Posses a strong safety management mindset, especially electrical safety, and a strong focus on quality control. Physical Requirements: Ability to lift 40 pounds. Willing to perform repetitive tasks while sitting or standing for extended periods of time. Dexterity and hand-eye coordination, including the ability to grasp, manipulate, and assemble parts and components that are often very small. Must have good eyesight, including depth perception, peripheral vision, and ability to differentiate between colors. Salary: $25-31/hour, based on experience and qualifications

We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Senior Assembler - Electro-Mechanical Job Summary We are seeking an experienced Senior Assembler to join our manufacturing team in Palo Alto. In this role, you will independently build and test complex optical, mechanical, and electro-mechanical sub-assemblies that support the production of our industry-leading medical aesthetic systems. The ideal candidate will bring hands-on technical expertise, a keen eye for precision, and a collaborative spirit to drive quality, process improvements, and mentorship within the team. This position offers the opportunity to contribute directly to the development and assembly of cutting-edge laser technology in a dynamic, innovative environment. In this role you will: Work independently to build optical and mechanical precision sub-assemblies. Train and mentor other assemblers on build and process techniques. Partner with Engineering to build prototype and pilot products and identify process improvements. Redline bills of materials and process methods to drive documentation updates. Perform analysis and repair on returned or rejected assemblies. Execute mechanical, electronic, opto-mechanical, and/or electro-mechanical assembly or system-level operations using various hand tools, fixtures, and equipment. Follow product methods to perform standard tasks such as component installation, electrical wiring, soldering, cable harnessing, plumbing, gluing, cleaning, labeling, and packaging of sub-assemblies. Maintain a safe and clean working environment by adhering to procedures, protocols, and industry regulations. Use precision tools and equipment to ensure proper form, fit, and function of assemblies. Perform in-process quality checks on components and assemblies. Collect and maintain (kit) materials for sub-assemblies. Experience And Education: 3-5 years of experience in a manufacturing assembly role. Proven experience building complex electro-mechanical and/or opto-mechanical assemblies. Ability to identify process improvements, detect defects or deficiencies in materials and assemblies, and troubleshoot moderately complex issues. Capability to support and assist less experienced operators. Strong manual dexterity and hand-eye coordination. Ability to stand or sit for extended periods (up to 2 hours) and routinely bend, reach, stoop, push, and pull. Ability to lift up to 20 pounds. Strong written and verbal communication skills. Exceptional attention to detail and accuracy. Ability to collaborate effectively within a team environment. The ideal candidate may also have: Experience building lasers and/or optical assemblies. Experience performing rough optical alignment. Certification in soldering and/or wire crimping. Ability to interpret blueprints and schematics. Experience with medical products, optics cleaning and handling, and component mounting and gluing. Prior work experience in a medical device or related manufacturing environment. Experience using manual and power hand tools. Compensation and Benefits: The salary range for this position is $24 - $27/hr. In addition to a competitive market-based salary, Sciton provides an opportunity to participate in equity/stock incentive programs, a profit-sharing bonus, and a comprehensive benefits package, including 401K with matching. FULL-TIME/PART-TIME Full-Time POSITION Senior Assembler LOCATION Palo Alto (HQ) ABOUT THE ORGANIZATION SCITON is an industry leader and manufacturer of medical aesthetic lasers and light source technologies. With a vision to improve people's lives, our top-tier devices are built to order with integrity by pioneering, customer-focused, and results-driven individuals. At the heart of it, innovation is a fundamental cornerstone of our culture. We strongly believe that new ideas can come from anyone, anywhere, at any time and embrace an open-door culture that welcomes and fosters individuals who are creative, driven, passionate, and willing to take the lead with us. Join us for an opportunity to grow and make an impact. Life at Sciton: At Sciton, people matter. We are more than a company; we are a family, which is why we give all our employees: The support, recognition, and room to grow their careers within Sciton. Empowerment to develop their creative genius and encouragement to be lifelong learners. Incentives for creativity and innovation across the organization.

Assemblers Day Shift (7:00 am to 3:30 pm M-F) & Swing Shift available Job Description · Can clearly communicate/understand verbal and written instructions in English. · Reliable/dependable. · Willing to learn. · Have excellent attention to detail. · Can be flexible with their schedule and are willing to do OT when needed. · Can stand for their entire shift (up to 12 hours). Additional Information If you are looking for a change and if you are interested in this job, you can contact me for more details. Direct Number- ************

We are seeking a detail-oriented Assembler to join our team supporting Nvidia's cutting-edge technology production. The ideal candidate will have prior assembly experience, strong attention to detail, and the ability to interpret technical documentation to ensure high-quality product assembly. Key Responsibilities - Assemble components and products according to schematics, technical drawings, and work instructions. - Inspect parts and assemblies for accuracy and quality standards. - Operate hand tools, power tools, and other equipment safely and efficiently. - Maintain a clean and organized work area to comply with safety and quality guidelines. - Collaborate with team members and supervisors to meet production goals and deadlines. - Identify and report any defects or issues promptly for corrective action. We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: **************************************************** Skills and Requirements - Education: High School Diploma or GED required. - Experience: Previous assembly experience in a manufacturing or production environment. - Ability to read and interpret schematics, technical drawings, and work instructions. - Strong attention to detail and commitment to quality. - Basic mechanical aptitude and familiarity with assembly tools and equipment. - Ability to stand for extended periods and lift up to 30 lbs. - Bilingual in Mandarin

The Assembler 2 position is responsible for the sub-assembly and packaging of chemistry analysis discs in a clean room environment. SHIFT: 3rd Shift: 9:00 pm - 5:30 am JOB RESPONSIBILITIES: This job description reflects assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. Work on the assembly line performing Rotor Production processes such as material handling, packaging, and loading and unloading semi-automated equipment at a fast pace Provide feedback to leads or supervisor when a deviation from accepted practice or safety issue is recognized Reliable inspection of small attributes using magnification ring lamp at a fast pace Follow cGMP, GDP, and safety requirements proficiently Participate in, follow, and provide updates on continuous improvement initiatives (5S, Tier boards, Kaizen, Gemba) Must be certified at bead inspection, weld inspection, and/or the diluent cup set up process Trained on dealing with biohazardous waste within Rotor Manufacturing Perform batch record reviews accurately and with precision Perform basic SAP tasks to review inventory requirements EDUCATION and EXPERIENCE REQUIREMENTS: High school diploma or equivalent (GED) preferred. Experience in a fast-paced environment or in a Medical device company is helpful TECHNICAL SKILLS REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Able to work in a fast-paced environment and perform a variety of functions Strong interpersonal skills and organizational skills, and excellent attention to detail Commitment to follow established policies, practices, procedures. Read, write, and communicate clearly in English to carefully and consistently follow procedures Proficient knowledge of MS office applications Must be certified at bead inspection, weld inspection, and/or the diluent cup set up process Physical Requirements: While performing the duties of this job, incumbent must be able to access all areas of the facility. Will lift 10 lbs. frequently and occasionally lift 50 lbs, and utilize certain Personal Protective Equipment including, but not limited to, hard hats, safety shoes, eye protection, gloves, and/or protective clothing. Availability to work any shift assigned and flexibility to periodically shift schedule start time. The US base salary range for this full-time position is $21.10 - $34.70 Our salary ranges are determined by role, level, and location. The range displayed on each job posting reflects the base pay target range for new hire salaries for the position. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. In addition to compensation, Zoetis offers a comprehensive benefits package that supports the physical, emotional and financial wellbeing of our colleagues and their families including healthcare and insurance benefits beginning on day one, a 401K plan with a match and profit-sharing contribution from Zoetis, and 4 weeks of vacation. Visit zoetisbenefits.com to learn more. Full time RegularColleague Any unsolicited resumes sent to Zoetis from a third party, such as an Agency recruiter, including unsolicited resumes sent to a Zoetis mailing address, fax machine or email address, directly to Zoetis employees, or to Zoetis resume database will be considered Zoetis property. Zoetis will NOT pay a fee for any placement resulting from the receipt of an unsolicited resume. Zoetis will consider any candidate for whom an Agency has submitted an unsolicited resume to have been referred by the Agency free of any charges or fees. This includes any Agency that is an approved/engaged vendor but does not have the appropriate approvals to be engaged on a search. Zoetis is committed to equal opportunity in the terms and conditions of employment for all employees and job applicants without regard to race, color, religion, sex, sexual orientation, age, gender identity or gender expression, national origin, disability or veteran status or any other protected classification. Disabled individuals are given an equal opportunity to use our online application system. We offer reasonable accommodations as an alternative if requested by an individual with a disability. Please contact Zoetis Colleague Services at ********************************** to request an accommodation. Zoetis also complies with all applicable national, state and local laws governing nondiscrimination in employment as well as employment eligibility verification requirements of the Immigration and Nationality Act. All applicants must possess or obtain authorization to work in the US for Zoetis. Zoetis retains sole and exclusive discretion to pursue sponsorship for the acquisition or maintenance of nonimmigrant status and employment eligibility, considering factors such as availability of qualified US workers. Individuals requiring sponsorship must disclose this fact. Please note that Zoetis seeks information related to job applications from candidates for jobs in the U.S. solely via the following: (1) our company website at ********************** site, or (2) via email to/from addresses using only the Zoetis domain of “@zoetis.com”. In addition, Zoetis does not use Google Hangout for any recruitment related activities. Any solicitation or request for information related to job applications with Zoetis via any other means and/or utilizing email addresses with any other domain should be disregarded. In addition, Zoetis will never ask candidates to make any type of personal financial investment related to gaining employment with Zoetis.

JOB FUNCTION: As a Mechanical Assembler you will be responsible for the assembly of mechanical pieces and being an integral part of our Production line. You will be responsible for functions that include using hand and power tools, following detailed assembly instructions, and contributing to a team effort by accomplishing related results as needed. Other duties may include assisting team members in ad-hoc projects such as assembling tables, transferring heavy material to different locations, and providing support for other manufacturing departments. QUALIFICATIONS: EDUCATION: High school diploma or GED equivalent and/or training or equivalent combination of education and experience EXPERIENCE: Minimum of 1-2 years of experience in a contract manufacturing environment LANGUAGE: English proficiency is required, Mandarin proficiency is a plus. SKILLS: Great verbal and written communication skills Read and understand work orders and manufacturing work instructions Accuracy for documentation Effectively present information and respond to questions from managers and employees Common sense to solve practical problems Knowledge of ISO-9001, ESD, SPC, and IPC-A-610 Attention to detail RESPONSIBILITIES: Using a variety of hand and power tools, fixtures to perform a series of operations to correctly assemble units Follow detailed assembly instructions, processes, and procedures Inspection cosmetic chassis defect before installing PCBA Maintains safe and clean working environment by complying with procedures, rules, and regulations Contributes to team effort by accomplishing related results as needed Pay rate: $20/h - $21/h Shift: Swing, Graveyard