Assembler musical equipment jobs near me - 337 jobs

Job Title: Assembler Duration: 01/26/2026 to 07/26/2026 Pay Rate: $17.00 - $19.00 Shift timing : 2nd Shift 3:30 pm- 1:30 am M_TH Monday-Thursday 5:30AM-3:30PM 2:30PM to 10:30PM Monday-Friday 3rd shift hours 10:30P-6:30A JOB SUMMARY Performs a wide variety of electronic or electro-mechanical assembly operations on assemblies or sub-assemblies. Determines and/or follows methods and sequence of operations in performing wiring, component installation, hand soldering and cable harnessing on assembly units. Makes setups and adjustments holding tolerances to blueprint specifications. Interacts daily with peers and customers (typically internal) to exchange or present factual information. Works on assignments that are routine in nature, requiring limited judgment. Has little or no role in decision-making. Receives predetermined assignments subject to moderate level of control and review. Normally receives detailed instructions on all work. Works under close supervision. Legal authorization to work in the US is required. Will not sponsor individuals for employment visas, now or in the future, for this job opening. Dexian stands at the forefront of Talent + Technology solutions with a presence spanning more than 70 locations worldwide and a team exceeding 10,000 professionals. As one of the largest technology and professional staffing companies and one of the largest minority-owned staffing companies in the United States, Dexian combines over 30 years of industry expertise with cutting-edge technologies to deliver comprehensive global services and support. Dexian connects the right talent and the right technology with the right organizations to deliver trajectory-changing results that help everyone achieve their ambitions and goals. To learn more, please visit ******************** Dexian is an Equal Opportunity Employer that recruits and hires qualified candidates without regard to race, religion, sex, sexual orientation, gender identity, age, national origin, ancestry, citizenship, disability, or veteran status.

Assembly Technicians Needed in Columbus, Ohio A national company with a facility in the Columbus, Ohio area is currently seeking several Assembly Technicians for opportunities with their growing team. The position is a Direct Hire opportunity that offers long-term stable employment, opportunities for growth, and great benefits. Assembly Technicians rates are anticipated to start between $25 to $30 an hour based on each candidate's experience and education. All well-qualified candidates will be considered regardless of pay rate. We offer excellent benefits including great medical, dental, and Vision. Qualified Assembly Technicians will have most, if not all of the following skills and experience: 3+ years of experience with advanced mechanical assemblies, including fitting, alignment, and adjustment of components to close tolerances. Read and interpret blueprints, layouts, proficient with basic math, computer use, follow written instructions and perform with minimal supervision. Skilled with hand/power tools, measuring instruments, and basic fabrication skills preferred. Inspect parts and assist with final preparation for shipping. Prior manufacturing or mechanical assembly experience required; technical/vocational training preferred. Forklift and overhead crane experience. Must be able to work in the United States (No H-1 sponsorship or student visas considered). Must be able to complete standard pre-hire checks including background, drug screen, references, etc.

Currently, we are seeking qualified candidates to join our Production Team as an Assembler on Afternoon Shift, in our Marion, Ohio manufacturing facility. The Marion, Ohio plant is the world's largest manufacturer of clothes dryers. Do you want to share your ideas in an innovative environment? Do you learn quickly in a continuous improvement atmosphere? Does the term lean manufacturing excite you? Do you have a great work ethic? These are full-time positions with no temporary agencies involved. As an associate, you will need to be able to work in a fast paced, high-speed environment, follow standardized work, and adhere to safe work practices in a continuous improvement environment. Whirlpool offers full-time employees an excellent wage and benefits package, including Health/Dental/Vision/Prescription Drug Plan, 401K, Life Insurance, 12 Paid Holidays, Paid Time Off, Tuition Reimbursement, and much more. * The starting wage is $20.25 per hour + shift premium; with time, ability to progress up to $25.70+ per hour * Paid time off (PTO) up to 120 hours in the first year (prorated on start date) * Benefits on day one (medical, dental vision) * Must have ability to work 2nd shift The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions: * Continuously stand or walk (up to 12 hours per day) * ability to reach (over shoulder), twist/turn, push/pull, bend, squat, and lift up to 35lbs frequently * Work on a moving/conveyor style production line or stabilized workstation * Assemble and install parts by hand or using tools/equipment. * Crating and packaging of materials, parts, products etc. Minimum Requirements * 1-years of consistent work history * Must be at least 18 years of age * Possess a high school diploma or GED; * Be subject to and successfully pass a pre-employment drug screen and background check. * Motivated to work as a team player who takes ownership of their work in a safety-minded environment * Must provide a resume Preferred requirements: * 3-months of manufacturing or distribution experience (consecutive) * Associates Degree Whirlpool Corporation (NYSE: WHR) is the number one major appliance manufacturer in the world, with approximately $21 billion in annual sales, 97,000 employees and 70 manufacturing and technology research centers. The company markets Whirlpool, KitchenAid, Maytag, Consul, Brastemp, Amana, Bauknecht, Jenn-Air, Indesit and other major brand names in nearly every country throughout the world. We stay true to our philosophy that says good business begins by not following but leading. Our brands and products help people make the most of time so they can focus on making the most of moments that matter. At Whirlpool Corporation, we believe that all people matter. Celebrating diversity and including thousands of perspectives empower us to create products that blend into every concept of home. Whirlpool Corporation is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. Additional information about our company can be found at ***************************** Follow us on LinkedIn or join the conversation @ HYPERLINK "********************************** HYPERLINK "********************************** HYPERLINK "*********************************

Working at Freudenberg: We will wow your world! Responsibilities: Test Qualifications: Test The Freudenberg Group is an equal opportunity employer that is committed to diversity and inclusion. Employment opportunities are available to all applicants and associates without regard to race, color, religion, creed, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity or expression, national origin, ancestry, age, mental or physical disability, genetic information, marital status, familial status, sexual orientation, protected military or veteran status, or any other characteristic protected by applicable law. Freudenberg Residential Filtration Technologies Inc.

At STERIS, we help our Customers create a healthier and safer world by providing innovative healthcare and life science product and service solutions around the globe. The MMC Assembler is responsible for maintaining the production of medical case cart products to meet customer requirements. What You'll do as a MMC Assembler Ability to assemble based on knowledge of the functions of major component parts and sub-assemblies within an assigned area. Use and understand torque wrenches and test equipment, and troubleshoot. Maintain published productivity standards on moderately challenging assemblies by utilizing a traveler, blueprint and standard work. Maintain high quality standards (meet the departments published quality rating). Maintain safe work areas and practice safe work habits. Apply 5S tools to include the T-card system. The Experience, Skills and Abilities Needed Required: High School Diploma or GED. 1-2 years of warehousing/manufacturing environment or experience. Preferred: Prior AS400 experience preferred, Experience with hydraulics and electrical component assemblies preferred. Other: Computer Skills to include Microsoft Office, and Shop Floor Control. Knowledge, understanding and application of Lean Manufacturing tools, such as, 5S, Kanban Inventory. Ability to read blueprints, knowledge of schematics. Experience using torque wrenches and test equipment and related troubleshooting. Ability to make decisions and stay quality focused. Ability to understand and follow work instructions, both written and oral. Ability to adapt to conditions as dictated by business requirements. Proven teamwork experience. Ability to work overtime, if required. Knowledge, understanding and application of Lean Manufacturing tools, such as, 5S, Kanban Inventory. What STERIS Offers We value our employees and are committed to providing a comprehensive benefits package that supports your health, well-being, and financial future. Here is just a brief overview of what we offer: Market Competitive Pay Extensive Paid Time Off and (9) added holidays Excellent Healthcare, Dental and Vision Benefits Long/Short Term disability coverage 401(k) with company match Maternity & Paternal Leave Additional add-on benefits/discounts for programs such as Pet Insurance Tuition Reimbursement and continued educations programs Excellent opportunities for advancement and stable long-term career Pay range for this opportunity is $19.11 - $24.73. This position is eligible for bonus participation. Minimum pay rates offered will comply with county/city minimums, if higher than range listed. Pay rates are based on a number of factors, including but not limited to local labor market costs, years of relevant experience, education, professional certifications, foreign language fluency, etc. STERIS offers a comprehensive and competitive benefits portfolio. Click here for a complete list of benefits: STERIS Benefits Open until position is filled. STERIS is an Equal Opportunity Employer. We are committed to equal employment opportunity to ensure that persons are recruited, hired, trained, transferred and promoted in all job groups regardless of race, color, religion, age, disability, national origin, citizenship status, military or veteran status, sex (including pregnancy, childbirth and related medical conditions), sexual orientation, gender identity, genetic information, and any other category protected by federal, state or local law. We are not only committed to this policy by our status as a federal government contractor, but also we are strongly bound by the principle of equal employment opportunity.

Job Description Heroux-Devtek, the world's 3rd largest producer of landing gear, serves the civil and military aerospace markets from production facilities in North America, Europe and United Kingdom. The Company's longevity, flexibility, and track record for the development and implementation of innovative production systems have distinguished it as a leader in the domain. With its most recent acquisitions, Heroux-Devtek is bolstering its status as one of the foremost landing gear, actuation and hydraulic system designers and manufacturers in the global aerospace industry. Information on the division: Located in Strongsville, the 90+ employee facility (100,000 sq. ft.) is one of Héroux-Devtek's centers of excellence for the final assembly of landing gear. As part of the Central Division you will lead P&L responsible for critical machining operations of major commercial aircraft programs such as the Boeing 777 and Embraer E-2, and important military programs as F-18, F-35, C-17 and C-130. With a strong focus on latest technology of the manufacturing processes with machining automation and techniques we aim to remain the best value producer of complex landing gear components. What we offer? Leaders who invest in your success, development, and growth A culture of true teamwork and pride in our product Competitive salaries linked to performance and paid time off 11 paid holidays A comprehensive group insurance plan including a HAS/FSA options, Dental & Vision Supportive wellness program, including healthcare discounts Automatic Life Insurance with supplemental options Short and Long Term Disability Insurance Opportunities for retirement savings with 401k plans including a company match Tuition reimbursement for relevant Certifications, Education, & Trainings Free access to a virtual doctor and the employee assistance program Social activities for all employees (BBQ, Golf, Christmas parties, etc.) Generous referral bonuses and advantageous recognition programs A motivating work environment and a human management style where you can make a difference Summary: The Assembler read drawings and models to complete assembling and disassembling of nose and main landing gear components for the Boeing 777 program and other military programs. Main responsibilities: Perform acceptance test procedures (ATP) on various hydraulic components (shock struts and actuators) Rubber stamp (serialization) to be performed when specified on parts prior to final shipping. Assembling and dissembling nose and main landing gear components for the Boeing 777 program and other military programs Read drawings and models to complete the final assembly for shock struts, actuators and drag struts according to the process plans. Identifying proper and improper fits, alignments, and condition of components Seal bushings and pain sealant on all parts prior to honing Identify opportunities for process improvements and create a process change request. Maintains lot traceability throughout process. 5-S/Housekeeping responsibilities Adheres to all company policies and procedures, including Health & Safety Requirements Other duties as assigned/required by schedule and workload. Our ideal candidate: High school diploma or equivalent AME/A&P license and or aerospace experience is preferred. At least 2 years' experience assembling aerospace components. Work culture and environment: Are you known as an innovation driver? Are you looking for your next challenge and opportunity to learn & excel in Aerospace? Héroux-Devtek offers you the opportunity to work in a diverse and team-oriented environment where skills development is a top priority. Here, employees are at the heart of the realization of the product, developed through engineering centers, factories, a service unit, and an accessible and agile head office for fast decision-making. Be part of a motivating top-notch team taking Aerospace to new heights! Candidates must meet security screening requirements as set out by ITAR directives. HDI Landing Gear is an equal employment opportunity (EEO) employer to all persons regardless of age, color, national origin, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, HDI Landing Gear will provide reasonable accommodations for qualified individuals with disabilities.

Job Description Assemblers Mentor, OH $20/hour 2nd Shift | 2:30 PM - 11:00 PM Full-Time | Steady Hours | Growth Opportunities About the Role Join our team as a Mechanical Assembler! You'll help build and inspect high‑quality mechanical units used in our products. This hands‑on role is great for someone who enjoys working with tools, following blueprints, and being part of a dependable production team. What You'll Do Assemble and inspect mechanical units and sub‑assemblies Identify and correct defects before final inspection Use hand and power tools to cut, shape, and fit parts together Read and interpret blueprints, diagrams, and technical documents Perform quality checks to meet production standards Collaborate with engineers and quality specialists What We're Looking For Strong mechanical aptitude and good hand‑eye coordination Ability to read blueprints and safely use standard tools Basic understanding of mechanical and electrical systems Dependable, team‑oriented, and detail‑focused Comfortable working in a manufacturing environment Steel‑toed shoes/boots required

Apply Description Assembly of various products and components to finished goods. Essential Duties and Responsibilities include the following; Perform any required set-up activity. and align components for assembly. Assemble fabricated/ purchased parts into subassemblies and complete products according to a bill of materials. Operate air tools and basic hand tools to assist in assembly operations. Additional tool operation may be required as necessary. Maintain safe and clean working environment by complying with procedures, rules and regulations. Perform essential job duties as directed by supervisor. Other duties may be assigned as necessary. Education and/or Experience High school diploma or general education degree (GED) is preferred And/or training; or equivalent combination of education and experience. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be willing and able to meet Quality and Production standards set by department. Must be willing and available to work overtime and Saturdays as scheduled. Must be willing and available to learn new processes as necessary. Must be willing and able to work in a team centered work environment. Ability to comprehend simple instructions, either written or verbal. Ability to effectively communicate and perform required documentation. Ability to perform addition, subtraction, multiplication, and division using whole numbers, common fractions, and decimals. Able to read basic tape measure and basic blueprints. Ability to apply common sense understanding to carry out detailed but uninvolved written or oral work instructions. Ability to deal with problems involving a few concrete variables in various manufacturing situations. Ferno is an equal opportunity employer and that all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran or disability status.

Job DescriptionDescription/Comment: Assembles mechanical units, fabricated parts/components and/or electrical/electronic systems to make subassemblies, assemblies or complete units using hand tools, power tools, jigs, fixtures and miscellaneous equipment. Fits, aligns, calibrates and adjusts parts and mechanisms to meet tolerances and product operating requirements; repairing units or products that have failed to meet requirements. This position requires knowledge that is acquired through experience, specialized education or training. The role has clearly defined procedures and tasks as well as defined guidelines to aid in decision making. Technical knowledge required is limited to the tasks performed in own discipline area and is considered basic. The tasks are generally routine and manual. The job is expected to follow detailed and defined rules / instructions and to make simple judgement in straightforward situations. Typically requires selecting between solutions already established. This job typically requires no experience.

TempToFT Assembler Rate: $16/hr Hours: 6am-2:30pm (some overtime until 4:30pm) Wilmington, OH C-D Responsibilities: - Assembly of various products and components to finished goods. - Perform any required setup activity. - Position and align components for assembly. - Assemble fabricated/purchased parts into subassemblies and complete products according to a bill of materials. - Operate air tools and basic hand tools to assist in assembly operations. Additional tool operation may be required as necessary. - Maintain safe and clean working environment by complying with procedures, rules, and regulations. - Perform essential job duties as directed by supervisor. - Other duties may be assigned as necessary. Requirements: - High school diploma or general education degree (GED) is preferred and/or training; or equivalent combination of education and experience. - Must be willing and able to meet quality and production standards set by department. - Must be willing and available to work overtime and Saturdays as scheduled. - Must be willing and available to learn new processes as necessary. - Must be willing and able to work in a team centered work environment. - Comprehend simple instructions, either written or verbal. - Effectively communicate and perform required documentation. - Perform addition, subtraction, multiplication, and division using whole numbers, common fractions, and decimals. - Read basic tape measure and basic blueprints. - Apply common sense understanding to carry out detailed but uninvolved written or oral work instructions. - Deal with problems involving a few concrete variables in various manufacturing situations. If you possess the skills we are looking for and ready to make a positive impact, apply NOW! We look forward to connecting soon!

Conduit Assembler is responsible for assembling and fabricating conduits used in electrical systems. They follow blueprints, diagrams, and specifications to cut, bend, and assemble conduit parts. They use hand and power tools to measure, cut, and thread conduits, and then connect and secure them using various fittings and fasteners. Conduit Assemblers may also be responsible for testing and inspecting completed assemblies to ensure they meet quality standards and electrical codes. They work in manufacturing settings, collaborating with other team members to meet production goals and deadlines. Essential Responsibilities Performs standard conduit bends and offsets Properly installs conduit & devices (interior & exterior) Accurately lays out, modifies, & installs wireway/cable tray per design Properly installs lighting, pipe lighting, & fixtures (interior & exterior) Demonstrates knowledge of conduit types, sizes, & fittings Properly & safely uses & maintains tools (band saw, threader, knockout) Reads & uses tape measure/other measuring tools Demonstrates ability to work from standard conduit schedule Wiring (i.e. anchoring, tie-wrapping, routing, flagging, and wire tagging) Crimping Wire/Cable stripping Adhere to all manufacturing policies and practices Ensure quality by following standard work/process instructions and identifying any potential risks to product quality Ensure that work areas remain clean and well organized Minimum Qualifications High school diploma or General Education Diploma preferred. Successful candidate will typically have a minimum of 1 year of relevant wiring experience in a manufacturing environment. Must have previous conduit experience with both thick and thin wall conduit. Must have a basic command of the English language, both written and verbal Must have basic mathematical skills (i.e. fractions, conversions) Skills, Abilities & Other Requirements Basic mechanical knowledge Must be familiar with common and job specific tools Must be able to read a tape measure Must be able to read and interpret prints (e.g. specification sheets, wiring diagrams, schematics, three-line and part drawings) Must be able to perform basic point-to-point wiring

Responsibilities Assemble product to specifications according to blueprints, drawings, and work orders. Use of power and hand tools required ability to meet production standards Qualifications Able to read and understand work instructions 1-3 months related experience Ability to add, subtract, multiply, and divide in all unites of measure Frequent bending, pushing/pulling, reaching, and lifting periodically up to 70 pounds Regularly lifting up to 35 pounds Education Preferred High School Diploma or GED

Nordson Measurement & Control, a global leader in Measurement & Control, is seeking an experienced and highly motivated individual to join our team. We are committed to creating a diverse and inclusive workplace, and we are looking for candidates who share that same commitment. Summary of the role As a member of our team, you will have the opportunity to work in a dynamic and collaborative environment, where your ideas and contributions will be valued and respected. Demonstrate attention to detail and ensure quality in all work processes. Maintain reliability in attendance and task completion. Conduct basic troubleshooting and diagnosing at the board level. Apply electronic fundamentals and logic in daily tasks. Read schematics and blueprints accurately for job requirements. Set up test apparatus for testing assemblies and equipment following established methods and standards. Use hand and power tools at an intermediate level, including a variety of tools for specific tasks. Operate measuring and testing devices (e.g., volt-amp meters, oscilloscopes, function generators) with intermediate skill. Perform calibration and adjustments using test equipment, identifying problems with alignment and calibration. Execute sub-assembly and final assembly of parts and products according to engineering drawings and specifications with intermediate ability. Navigate and utilize the ticketing system (Oracle Service Cloud) and ERP system (Oracle ERP) at a basic level for incident viewing and completing depot repairs. Understand inventory controls at a basic level. Interested? If you are interested in being a part of a team and creating an inclusive and diverse workplace, please apply online with your CV. About Nordson Measurement & Control Nordson Measurement & Control designs, develops and produces a wide range of process measurement and control instrumentation for a broad scope of manufacturing industries. By joining our team today, you will help us bring innovative ideas to life. Nordson Measurement & Control is a global team that works to create intelligent solutions that help our customers improve their manufacturing process, produce better products and become even more competitive. We offer a supportive culture in a growing and dynamic work environment. Whether you're just beginning your career or you're a seasoned professional, there's a place for you to belong at Nordson Measurement & Control. We offer hourly and salary positions in production, maintenance, customer service, quality, engineering, and more. We actively invest in our teams to help you build your skillsets and advance your career.

Enprotech Industrial Technologies is a team of passionate people, with can-do attitudes who act safely and with urgency and passion to provide high value and innovative solutions to our customers. We are the largest supplier of repair, rebuilding, and field services for the metal forming and steel industry in North America. Our facilities are equipped to provide our customers with exceptional engineering, machining, welding, fabrication and machine assembly and disassembly capabilities. Position Summary & Objective Assembles products according to customer's requirements. Assembles and fits components according to assembly blueprints, manuals, engineering memos, sketches, and knowledge of machine construction to construct, rebuild, and repair machines and equipment using hand tools and power tools. Essential Functions Performed by the Position Creates plans for the disassembly and repair per the assembly procedures, following specifications provided and using knowledge gained by experience. Verifies conformance of parts to stock list and blueprints using measuring instruments such as calipers, gauges, and micrometers. Inspect parts to quality standards. Aligns components for assembly, manually or with a crane. Removes high spots and smooths surfaces using chisels, scrapers, files, and powered hand grinder. Assemble, set up, and operates machines to verify functionality, machine capabilities, and conformance to customer's specifications. Form, bend, and fasten piping, fixtures, and attachments required to provide the machine with air, water, and oil. May bend and install pipe for hydraulic systems. Verifies alignment and tolerances of moving parts using measuring instruments such as dial indicators and micrometers. Installs moving parts such as shafts, levers, or bearings, and works them to test free movement and operation of assembly by hand. Test or assist in testing operation of completed product. Align and mesh gears in gearbox to assemble system of gears. Mounts and connects auxiliary, mechanical, electrical, electronic, pneumatic, or hydraulic equipment. Cuts and fits pipes and tubing. Test, or assist in testing, operation of completed product. Knowledge, Skills, and Abilities Solid mechanical skills. Must have mechanical ability to proficiently use cranes and other heavy tools and equipment that are normally required in daily assembly and disassembly operations. Must own tools of the trade, and be able to use them effectively. Ability to use judgment to plan, perform, and make decisions as to the sequence of operations and processes within the limitations of established or standard methods and procedures. Must be able to interpret prints well enough to determine appropriate disassembly sequence for a variety of heavy equipment. Ability to read, interpret a variety of assembly prints, and understand verbal and written instructions. Capable of using small machine tools, drill presses, welders, cranes, and forklifts. Basic computer skills and the ability to use basic shop math. Ability to verbally communicate with team members, supervisors, and engineers. Possess the physical strength and ability to safely handle heavy equipment and tools. Ability to bend tubing, lube, hydraulics, and pneumatics. Qualifications Required Education and Experience A high school diploma or equivalent. 3-5 years' experience in mechanical assembly and disassembly. Environment and Working Conditions Shop environment. Travel Requirements (percent) Up to 10% Shift: 1st Shift - 6:30 am-5:00 pm Disclaimer This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. Additional Information The benefits of joining our team Because we seek to hire the best people, we work hard to provide benefits that make their lives better, so we offer a comprehensive benefit program which features: health coverage for you and your family through medical, dental and vision plans a 401(k) plan in with a generous company match financial protection through disability, life, and accidental death & dismemberment insurance plans tax advantages through flexible spending accounts that allow you to pay for specific health-care and dependent care expenses with pre-tax dollars a generous paid time off program in which the benefits increase along with your tenure with the company When you join our team, you do more than simply switch companies to progress your career. You become part of our family, a group of talented women and men who drive business success. #INDPREM Industrious Group and its subsidiaries is an equal opportunity employer. All applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. All employment decisions are made based on qualifications, merit and business need.

Assembler - 1st Shift | North Canton, OH | Full-Time Alliance Industrial Solutions is urgently hiring Assemblers for a growing manufacturing client located near downtown Canton, Ohio. This is a full-time, 1st shift opportunity offering steady hours, weekly pay, and long-term career growth in a fast-paced production environment. Important: This location is not accessible by public transportation. Pay & Benefits Starting pay: $15.00/hour Pay increases and a comprehensive benefits package available after a probationary period Long-term, career-focused opportunity with internal promotions and cross-training Stable, full-time employment with a reputable employer Shift Schedule 1st Shift: Monday-Friday, 7:00 AM - 3:30 PM Mandatory overtime required near the end of each month (flexibility required) Assembler Responsibilities Perform hands-on assembly of components and finished products Read and use a tape measure accurately Identify components and follow assembly steps and processes Perform wiring and cabling during assembly as required Safely operate hand and power tools Conduct basic equipment and safety checks Maintain productivity while working independently or as part of a team Follow all safety, quality, and production standards Assembler Qualifications 3-6 months of manufacturing or assembly experience required Comfortable standing for long periods and performing repetitive tasks Strong attention to detail and manual dexterity Ability to work overtime as needed Good communication skills with supervisors and coworkers Dependable, punctual, and safety-focused Why Apply? Immediate openings Consistent first-shift schedule Growth-oriented company culture Opportunity to build a long-term manufacturing career If you are interested in this full time 1st shift Assembler role in North Canton, OH please apply now!

🕒 Work Hours: 7:00 AM to 3:30 PM or 8:00 AM to 4:30 PM, Monday through Friday 💲 Competitive Compensation Make the Right Connection-Build Your Career with Dixon! Dixon Bayco, a proud division of The Dixon Group is seeking a dedicated and skilled Assembler to join our team in West Chester, OH! The ideal candidate will have hands-on experience in assembling electrical components and systems. This is a great opportunity to be part of a growing company with room for career advancement! About Us: The Dixon Group is a global, family-owned manufacturing company with a history of over 100 years of operation in the U.S.A. Based in Chestertown, Maryland, with distribution centers located worldwide. The company has a diverse workforce and a strong values-based culture. As an innovator in the hose coupling industry, our mission is to provide real solutions for our customers while fostering a supportive and collaborative work environment. At The Dixon Group, we value the contributions of our Military Veterans and proudly employ our nation's heroes. Veterans are strongly encouraged to apply. 🚚 What You'll Do: Assemble electrical components, subassemblies, and finished products according to blueprints, wiring diagrams, and assembly instructions. Test electrical components for functionality and safety compliance. Solder and connect wiring in electronic devices or equipment. Maintain a clean and organized work environment. Follow safety procedures and quality standards during assembly and testing. Document and track assembly progress and report any issues to supervisors 🎯 What We're Looking For: High school diploma or equivalent required. 3-5 years of experience in electrical assembly or similar roles. Proficient with electrical hand tools and machinery (e.g., soldering irons, wire strippers, multimeters). Ability to work independently and as part of a team. Attention to detail and commitment to quality. Excellent problem-solving skills. Strong communication and time management skills. 🌟 What We Offer: Medical, dental, and vision insurance for you and your family Competitive salary Bonus programs 401K retirement plan Training opportunities Tuition reimbursement Paid vacation, PTO, and holidays Gym reimbursements, and more! Join us and be a part of a team that values your contributions and supports your goals! The Dixon Group is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices and laws. Accordingly, to the fullest extent required by applicable law, The Dixon Group strictly prohibits and does not tolerate discrimination against employees, applicants, or any other covered persons. The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law. To that end, personal information will be collected solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements. The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.g., in response to a lawful subpoena; mandatory tax reporting; etc.)

• Following general safety guide lines • Bend stoop and kneel • Keep pace of production line • Wear appropriate PPE • Assembles smaller components onto larger components. • Inspects parts for quality. • Detects and reports defective materials to supervisor. • Conducts machine operation and safety checks on prescribed intervals. • Performs general clean-up and organization of work area (SCORE- Safety, Cleanliness, Organization, Responsiveness, and Efficiency). • Other duties as assigned to maintain production. Additional Information If you are looking for a change and if you are interested in this job, you can contact me for more details. Direct Number- ************

Goodwill is a non profit organization that provides education, job training, employment services, and career development for people experiencing disabling and disadvantaging conditions to enable them to achieve their highest levels of independence. Apply at: ************************ EOE/M/F/VETS/DISABLED Job Description Goodwill Industries is seeking part-time assemblers for 5.5 hour shifts. 12:30PM - 6:00PM. Pay rate is $11.00/hour. Typically Monday-Friday with an occasional Saturday. Must have an eye for quality and be able to work in a fast-paced environment meeting hourly production goals. The Assembler is responsible for production of various components and processes related to the company's manufacturing contracts at the Sandusky Plant, Fremont Plant or Bellevue Plant. Typical tasks include assembly of parts, bagging of literature or hoses, sorting, and some tasks require operating simple machinery. The Assembler is expected to meet production goals and quality standards set by Goodwill and its customers. Essential functions: · Work with facility management in maintaining an efficient flow of product (restocking, assembly line, weighing, preparation of product for shipments, etc). · Maintain a good attendance record. · Maintain work area in a neat and orderly manner. · Work with supervisor in solving problems while remaining flexible in adjusting to changes in operation and scheduling requirements. · Communicate with supervisor about any shortage of materials or necessary services. · Prepare paperwork as required for materials shipped or delivered after establishing accurate amounts. · Perform contract work in an accurate, neat and thorough manner as described by work instructions and supervisor. · Neatly and legibly complete necessary paperwork for individual (personal) daily production totals and quality reports as necessary. · Utilize payroll software for clocking in and out. · Work with supervisor in accepting daily work assignments in order to meet production requirements. · Complete assembly as required by individual contract specifications. · Ensure that product meets both company and customer quality standards. · Attend safety trainings and follow all safety procedures and protocols to ensure a safe and supervised work environment for all employees at all times. · Promote positive teamwork among co-workers. · Perform other related duties as assigned. Qualifications and required skills: · Ability to use physical exertion such as prolonged periods of standing, walking, recurring bending, reaching and climbing; ability to lift 25 to 50 lbs. Education and experience: · High school diploma or GED preferred. · One year experience in a manufacturing environment preferred. EOE: M/F/VETS/DISABLED Job Type: Part-time Pay: $11.00 per hour Additional Information EOE/M/F/VETS/DISABLED All your information will be kept confidential according to EEO guidelines.

Gradall Industries takes great pride in being a top employer in the Tuscarawas County area for more than four generations. As a company, we are dedicated to building an outstanding team of professionals who work hard, take pride in their work, and contribute to a positive, respectful workplace culture. If you share these values and want to be part of a growing company, this could be the perfect opportunity for you. Gradall is currently hiring for Heavy Equipment Assembly positions. If you have relevant experience in Heavy Equipment Assembly and you meet the requirements listed below, please apply today for consideration. Position Summary: Under general supervision, assembles numerous product lines using accepted assembly procedures.