Assembler jobs in North Carolina

Job Title: Machine Builder - Enclosure (Not licensed) Client: AVL Manufacturing Schedule: 7AM TO 3:30PM Pay Rate: $58,000/yr We are seeking a skilled and experienced Machine Builder - Enclosure (Mechanical Assembler) to join our manufacturing team. This role is responsible for the mechanical assembly of generator enclosures, piping, and heavy industrial components. The ideal candidate will have hands-on experience working in a heavy industrial environment, operating material handling equipment, and interpreting technical drawings. Key Responsibilities: • Assemble and fit mechanical parts, enclosures, piping, and structural components • Read and interpret blueprints, diagrams, and specifications to guide assembly operations • Use forklifts, overhead cranes, and hoists to safely move heavy parts and materials • Install major components such as tanks, louvers, frames, generators, and panels • Use hand and power tools to complete complex assemblies and mechanical fits • Conduct inspections and testing to ensure parts and finished assemblies meet quality standards • Assist with on-site installation, service, and warranty work when required • Provide feedback to engineering and supervisors for continuous improvement • Follow all safety procedures and perform equipment inspections (cranes, lifts, etc.) • Maintain a clean and organized work area • Train and mentor junior team members Qualifications: Required: • Minimum 2 - 4 years of experience in heavy industrial mechanical assembly • Proficient in reading mechanical blueprints and interpreting technical documentation • Certified in forklift and overhead crane operation • Physically able to lift 50-75 lbs regularly and work in a high-traffic shop environment • Knowledge of material handling protocols and equipment • Strong mechanical aptitude and familiarity with industrial components and tools • Clear understanding of the Occupational Health and Safety Act and safe work practices Preferred: • Experience in an ISO 9001-certified manufacturing environment • Background in genset assembly or large-scale industrial equipment • Service technician experience is a plus

Production Assembler - Charlotte, NC Type of Assignment: Regular Position Type: Full Time Shift: 1 st Payment: $17-18/hr DUTIES & RESPONSIBILITIES: Perform mechanical/electronic assembly by following all assembly procedures, specifications, drawings, and packaging requirements in compliance to company standards. Under direct supervision, performs a variety of assembly tasks that require the ability to follow written and/or verbal instructions and a thorough knowledge of techniques, materials, tools, and equipment. Refers to process documentation (drawings, travelers, BOM's, and specifications) to perform assembly tasks Must become knowledgeable in the use of all basic assembly equipment in the dept. Learns and uses basic tools and fine hand tools. Must inspect all workmanship and special processes following the process documentation. Performs all necessary tasks efficiently and accurately by following established written procedures. Maintains an organized work environment necessary for efficient operation. Keeps equipment and department neat and clean at all times. Teamwork in a high paced environment to achieve excellence and continuous improvement. Detail oriented to achieve zero defects MINIMUM QUALIFICATIONS: Experience: Mid-level with experience Reliable transportation to be at work on a daily basis and ready to perform duties as necessary Physical Requirements: Must be able to perform the essential functions as required. Need to have good eye and hand coordination. Under direct supervision, performs a variety of tasks that require the ability to follow written and/or verbal instructions and a thorough knowledge of inspection techniques, solder quality, tools, and equipment. PREFERENCES: Preferred experience with IPC-A-610, IPC-A-620, J-STD-001 standards Printed Circuit Board Assembly processes Electrostatic Discharge (ESD) handling controls. Working Hours: Normal work schedule is Monday through Thursday from 7am until 5:30pm with lunch and breaks. Some overtime may be required as needed.

A Snapshot of Your Day As a Transformer Mechanical Assembler, you will be responsible for performing the final assembly of the transformer to prepare it for testing and the disassembly of the tested transformer and preparation for dispatch. This position is designed for someone with a growth mindset and a commitment to safety and quality compliance. You will receive specialized training in Large Power Transformer Manufacturing as well as cross-train in new processes as you progress in your job role. You will gain unique and valuable skills that will set you apart in the world of Large Power Transformers. This position is based at our upcoming Siemens Energy Transformers Manufacturing Center in Charlotte, North Carolina. The facility is scheduled to be operational in 2026. Initially, your journey will involve supporting the factory's construction, helping implement new processes, building a high-performance team, and coordinating all aspects of the setup to ensure a smooth transition into full-scale production How You'll Make an Impact Prepares and assembles transformer components (tanks, covers, radiators, etc.) for final assembly and prepares the unit for testing Supports the testing process and disassembles accessories post-testing to prepare the transformer for shipping and dispatch Operating overhead cranes, forklifts for transport of accessories and components Performs quality inspections, documents processes, and assists in developing and maintaining technical instructions for assembly and disassembly procedures Planning and reviewing the tasks to be carried out according to pre-established production plan and manufacturing standards. Responsible to fulfill and/or to support to fulfill all protocols, policies, guidelines, and competences coming from all current system [EHS, QA, CyberSec, etc.]. What You Bring An associate degree in a related field is preferred or equivalent experience in a manufacturing environment will also be considered Experience operating cranes and the ability to obtain a Crane operation certification. Ability to use math, read and interpret complex drawings, and perform complex measurements. Applicant must be able to obtain Keys certification test on reading and writing and Blueprint reading test offered by local community colleges. Applicant must be able to obtain and maintain Fork Truck License and certification for working in heights. Ability to thrive in a fast-paced, time-sensitive setting. Other Key Requirements: Successful applicants must be able to pass standard hearing, vision, and pulmonary function tests, read, write, understand, and follow verbal and/or written instructions in English. Must be willing to relocate temporarily to Mexico, Brazil or Germany for on-the-job training for a period of 3 months based on the proficiency in the area of training. Appropriate relocation support and compensation will be provided. Applicants must be legally authorized for employment in the United States without need for current or future employer-sponsored work authorization. About the Team Grid Technologies Our Grid Technology division enables a reliable, sustainable, and digital grid. The power grid is the backbone of the energy transition. Siemens Energy offers a leading portfolio and solutions in HVDC transmission, grid stabilization and storage, high voltage switchgears and transformers, and digital grid technology. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards Career growth and development opportunities Supportive work culture Company paid Health and wellness benefits Paid Time Off and paid holidays 401K savings plan with company match Family building benefits Parental leave #barcode Equal Employment Opportunity Statement Siemens Energy and Siemens Gamesa Renewable Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. California Privacy Notice California residents have the right to receive additional notices about their personal information. Click here to read more .

Adecco is now hiring for a Warehouse position with our client in Durham, NC. Weekly pay starts at $15.00-$16.15 per hour, with multiple shifts available. Apply today and join a dynamic team! Responsibilities: Assist the machine operator in arranging and maintaining an efficient and organized work area Remove trays of cards from boxes and place them behind the appropriate feeders Inspect trays of cards for defects, cutting, or printing errors, and ensure they meet established quality standards Load verified cards into the correct feeders to maintain continuous production Follow quality control procedures, safety rules, and emergency protocols Participate in the company recycling program and maintain a clean, orderly work environment Perform additional duties as assigned by the machine operator or supervisor Requirements: This position is entry-level, no experience needed Ability to safely and successfully perform all essential job functions Ability to meet quality and productivity standards Ability to lift and carry up to 30 lbs. Ability to stand for the entire shift and walk around the warehouse Ability to maintain regular and punctual attendance Mandatory overtime may be required Schedule: 2-2-3 Rotation (2 days on, 2 days off, 3 days on, etc.) Every Other Weekend Pay Details: $15.00 to $16.15 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Assembles materials and products manually, operates auxiliary equipment and performs quality functions to ensure product meets quality criteria. Follow all work processes implemented in the department, all safety and company guidelines as outlined in Cambro employee handbook. ESSENTIAL JOB FUNCTIONS Ensures quality standards are maintained in handling, packaging and finishing of all products assembled/packaged. Comply with safety, operating policies, procedures regarding equipment, materials, and finished goods. Performs sanding, polishing, cleaning, assembly and packing job tasks as assigned. Ensures correct quantity of product per carton and proper assembly/packaging requirements are followed. Read and follow assembly schedule, write tickets and make labels, W.I.P., or products accurately. Verifies box and UPC label accuracy with packaged product. Fills out and maintains required data on production-related forms. Inspects the product at each step of the secondary and/or packaging process for quality defects. Performs necessary post-molding operations and rework as required to adhere to quality standards. Flexible to work on all packing/assembly operations Maintains a clean and organized workstation. Maintains strict housekeeping guidelines and safety practices at all times. Recognize and report any problems, issues, discrepancies, or questions to Process Technician and/or Supervisor in a timely fashion. Must be able to read and understand instructions for assembly, packaging and operating secondary machinery. Maintain reliable and consistent attendance, including being punctual, and dependable in order to meet the needs of the department and the organization. Execute each essential duty satisfactorily in order to perform job successfully. Follows all safety procedures required in work area, wears PPE as needed, attends all safety meetings, and reports safety issues regarding equipment or unsafe/hazardous conditions. Performs effectively as a team member, able to work well with others, open to receive and give feedback, and treats everyone with respect. Takes ownership of own work and behavior, accepts accountability for own actions, encourages solutions, and communicates status of work/projects. Follow all department quality standards/criteria. Raise concerns and issues to immediate manager. Able to understand and demonstrate Cambro company culture, display company core values (Safety, Quality, Respect, and Service). Understands department's key performance indicators and contributes to achieve these goals both individually and as a team. Other duties as needed or required. ADDITIONAL RESPONSIBILITIES Must be able to work overtime as needed, remain flexible and open to possible schedule changes in order to meet business needs. REQUIRED QUALIFICATIONS The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High school diploma or general education degree (GED); or up to six months related experience; or equivalent combination of education and experience. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to speak effectively with employees of organization. Must be a good team player, self-motivated and open-minded. Must be able to work with minimal supervision, meet and maintain high quality work standards, and adapt quickly to new projects/assignments. Must be able to work any shift as needed. PREFERRED QUALIFICATIONS English preferred PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sitting, walking, standing, bending at the neck, bending at the waist, squatting, climbing, kneeling, crawling, twisting at the neck and waist, repetitive use of hands, simple grasping, power grasping, fine manipulation, pushing and pulling, reaching above and below the shoulder, carrying/lifting up to 50 lbs. Driving cars, trucks, forklifts and other equipment Working around equipment and machinery Exposure to excessive noise Exposure to dust, gas, fumes or chemicals Working at heights Use of special visual or auditory protective equipment Walking on uneven ground Operation of foot controls or repetitive foot movement Risk of exposure to bio-hazard while working such as: bloodborne pathogens, sewage, hospital waste, etc. PPE REQUIREMENTS Safety glasses Utility gloves Steel-toe slip-resistant shoes Hardhat Hearing protection (e.g. ear plugs, ear muffs) Face shields Face covering (mask) in accordance with company policy. Mfg Assembler CAMBRO is proud to be an equal-opportunity workplace. All qualified applicants will receive consideration for employment without regard to and will not be discriminated against based upon race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic information, military or veteran status, or other characteristics protected by law.

**Your Work Shapes the World at Caterpillar Inc.** When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. **Are you ready to build what matters? Build More Than Machines.** **Build a Career.** **Caterpillar is looking for candidates that want to build a career.** You have a lot to offer, so we offer a commitment in return to you as a professional - and as a person. We offer competitive wages, quarterly bonus, comprehensive benefits that begin on Day **ONE** and paid training. We don't lead our industry - our people do. Watch our Video (******************************************** **to see our team build top-of-the-line Small Wheel Loaders.** **As an Assembler at Caterpillar you will:** + Follow documented procedures to perform safe and defect free assembly and adjustment of parts and components. + Leverage lean manufacturing concepts to support continuous improvement and waste elimination. + Use industrial power tools for assembly and lifting devices to move heavy components. **Physical Requirements (with or without reasonable accommodation):** + Willing and able to sit or stand for prolonged periods + Willing and able to perform repetitive operations + Willing and able to lift up to 35 lbs **Basic Requirements:** + At least 9 months of previous work or volunteer experience **Resumes are highly encouraged** . **Please do not submit a blank application (no work history or resume attached) as this may lead to disqualification.** **Top Candidates will also have:** + Manufacturing experience + Heavy equipment machine assembly experience + Experience reading blueprints **Additional Information:** **Shift Schedule:** 1st Shift: Monday-Thursday, 6:00 am - 4:30 pm, occasional MANDATORY overtime shifts scheduled on Fridays as business needs require - currently scheduling 2 overtime shifts a month. **Employee benefit details** Our goal at Caterpillar is for you to have a rewarding career. Here you earn more than just an hourly wage. We offer a total rewards package that provides **Day ONE** benefits (medical, dental, vision, RX, and 401K) along with the potential of a quarterly bonus. Additional benefits include paid holidays and paid time off. **Final details** Please frequently check the email associated with your application, including the junk/spam folder, as this is the primary correspondence method. If you wish to know the status of your application - please use the candidate log-in on our career website as it will reflect any updates to your status. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as H, L, TN, F, J, E, O. **Summary Pay Range:** $18.00 - $22.40 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job-related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. **Benefits:** Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. + Medical, dental, and vision benefits* + Paid time off plan (Vacation, Holidays, Volunteer, etc.)* + 401(k) savings plans* + Health Savings Account (HSA)* + Flexible Spending Accounts (FSAs)* + Health Lifestyle Programs* + Employee Assistance Program* + Voluntary Benefits and Employee Discounts* + Career Development* + Incentive bonus* + Disability benefits + Life Insurance + Parental leave + Adoption benefits + Tuition Reimbursement * These benefits also apply to part-time employees **Posting Dates:** September 29, 2025 - December 22, 2025 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community (*********************************************** .

Basic Function: Responsible for assembly of mechanical and electrical parts. Operate solder pot, handle cable assembly, and test parts. Significant Responsibilities: Performs specific job responsibilities : • Assemble mechanical and electronic parts according to work instructions and assembly drawings. • Recognize cosmetic and functional discrepancies in parts and assemblies. • Operate solder pot according to work instructions. • Read Bills of Materials and Shop Packs to include the router and pick list. • Clean the solder pot according to safety and operating procedures. • Perform final assembly and tests on cables. • Conduct rowing inspection of work in process. • Inspect assemblies for conformance to standards. • Operate Signature PCB test equipment. • Ensure each product passes testing requirements to standards. • Load and operate the IDC Insertion Machine. Promotes OCC's service excellence and quality. Provides excellent service to customers; builds strong relationships and team cohesiveness; focuses on quality and positive solutions; communicates respectfully; demonstrates compassion and understanding in response to customer requests/needs. Champions OCC's mission, vision, and values (as detailed in our 15 Essential Points of Success); complies with policies and procedures, ethical standards, and Code of Conduct. Minimum Qualifications Required: Education & Experience: High school diploma or general education degree (GED) is required. Must have 12 months of experience in assembly. Must be able to pass Solder Pot Certification. Essential Skills, Abilities & Knowledge: Ability to use small hand tools such as screwdrivers, nut drivers, Allen/Star/Crescent wrenches, microscope, hand crimpers, and height gauge. Ability to use soldering iron and de-soldering tools. Ability to read and follow basic instructions. Good communication skills, both written and oral. Ability to read and understand assembly drawings and work instructions. Ability to work in a team environment with minimal supervision. Pays close attention to detail with the ability to complete assignments accurately and recognize and assist in resolving problems. Computer knowledge of Microsoft Word and Excel is preferred. Working Conditions: While performing this job, the employee is regularly required to stand and walk. The employee must regularly lift and/or move up to 35 lbs. and occasionally lift up to 50 lbs. The employee must have full range of motion ability, including stretching, bending, and stooping. This job requires sight sufficient for significant reading. Specific vision abilities required by this job include color vision. This work also requires an individual with hearing sufficient for extensive, direct contact with employees. The noise level in the work environment is usually moderate. The employee is regularly exposed to moving mechanical parts, fumes or airborne particles, and toxic or caustic chemicals. Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. Note: This job description is only meant to be a representative summary of the major responsibilities and accountabilities performed by incumbents of this job. The incumbents may be requested to perform job-related tasks other than those stated in this description

Ability to lift up to 50 pounds repetitively · Ability to physically move material from prime location to point of use · Pack out procedures · Read BOM and Job travelers · Identify parts and their location · Perform final build of products > 6 months · Perform a variety of mechanical assembly of component parts as assigned following standard procedures, work instructions and/or drawings · Ensure proper assembly of component parts into assemblies from procedures, work instructions and/or drawings · Assure quality of all work produced and assure quality of work received from previous operations. · Operate equipment in a safe and efficient manner as directed ADDITIONAL RESPONSIBILITIES: · Performs other duties as assigned by supervisor · Participate in monthly quality feedback meetings · Willing and able to work in accordance with Lean methods and practices · Willing to participate in continual training and willing to assist in the training of other employees · Comply with company rules and regulations · Promote a safe work environment

📍 🕒 Shift Hours: 6:30 AM - 3:00 PM, Monday through Friday 💲 Competitive compensation Make the Right Connection-Build Your Career with Dixon! At Dixon Quick Coupling, a trusted division of Dixon Valve & Coupling Company, we take pride in manufacturing high-performance quick connect couplings for industries that power the world. We're built on a legacy of innovation, integrity, and teamwork-and we're looking for motivated individuals to help us continue that tradition. We are currently hiring a 1st Shift Assembler to join our team in Dallas, NC. In this hands-on role, you'll assemble mechanical components with precision and care, playing a critical part in ensuring the durability and reliability of every product that leaves our facility. Walk-in applications are welcome! Stop by 2925 Chief Court, Dallas, NC to fill out an application in person. 🔧What You'll Do: Assemble mechanical components and quick couplings using a variety of hand and power tools. Interpret blueprints, work instructions, and technical drawings accurately. Perform quality inspections to ensure all parts meet specifications. Maintain a clean, organized, and safe work environment. Record production data and follow standard operating procedures. Work collaboratively with team members to meet daily production goals. Engage in training, development, and continuous improvement efforts. 🎯What We're Looking For: High school diploma or equivalent. Prior manufacturing or mechanical assembly experience is a plus. Ability to read and understand technical drawings and measurements. Strong attention to detail, manual dexterity, and problem-solving skills. Basic computer and math skills. Comfortable working in a fast-paced environment. Ability to stand for long periods and lift up to 50 pounds. 🌟 What We Offer: At Dixon, we care about our people. That's why we offer a comprehensive benefits package that supports your health, growth, and work-life balance: Competitive compensation Bonus and incentive programs Medical, dental, and vision insurance (for you and your family) 401(k) retirement plan Paid vacation, holidays, and PTO Tuition reimbursement and training opportunities Gym membership reimbursement A positive, team-focused environment where your contributions matter Start your journey with Dixon-where your work connects the world. Apply today and be part of something that lasts. The Dixon Group is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices and laws. Accordingly, to the fullest extent required by applicable law, The Dixon Group strictly prohibits and does not tolerate discrimination against employees, applicants, or any other covered persons. The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law. To that end, personal information will be collected solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements. The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.g., in response to a lawful subpoena; mandatory tax reporting; etc.)

Job Details Charlotte, NCDescription Responsibilities Produces components by assembling parts and subassemblies. Reads and deciphers schematics, blueprints, and assembly instructions. Positions or aligns components and parts, either manually or with specific equipment. Uses hand tools or machines to assemble parts. Conducts quality control checks. Cleans and maintains work area and equipment, including tools. Prepares work to be accomplished by studying parts lists and gathering parts, subassemblies, tools, and materials. Positions parts and subassemblies by using templates or reading measurements. Assembles components by examining connections for correct fit, fastening parts and subassemblies. Verifies specifications by measuring completed component. Resolves assembly problems by altering dimensions to meet specifications; notifying supervisor to obtain additional resources. Maintains a safe and clean working environment by complying with procedures, rules, and regulations. Maintains inventory by checking stock to determine supply levels, placing and tracking orders, and verifying receipt of supplies. Conserves resources by using equipment and supplies as needed to accomplish job results. Documents actions by completing production and quality forms. Qualifications Requirements and Skills Physical stamina and strength Safety management mindset Focus on quality control Dexterity and hand-eye coordination, including the ability to grasp, manipulate, and assemble parts and components that are often very small Supervisory Responsibilities None Qualifications Requirements Education and / or experience High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Language skills_________________________________________________________________________ Ability to speak / understand the English language Mathematical skills Demonstrated ability to add and subtract two-digit numbers and to multiply and divide Ability to perform these operations using US dollar and weight measurements, volume and distance. Certificates, licenses, registrations None Other skills and abilities Employees will use common hand-tools. Please note: This job description is not designed to cover, or contain, a comprehensive listing of activities, duties or responsibilities that are required of the employee for the job. Duties, responsibilities, and activities may change at any time with or without notice. Physical demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, climb, stoop, kneel, crouch, reach with hands and arms, and use hands to finger, handle or free objects. The use of common hand tools and occasionally sharp tools are involved. The employee frequently is required to talk, hear, and communicate with other employees. The employee must be able to move and/or lift objects up to 10 pounds often. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral, and depth perception vision Work environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to work near moving mechanical parts and equipment. The noise level in the work environment is usually loud. Gas - Fired Products provides equal employment opportunities to all employees, and applicants for employment, and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, ender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job.

Job Description We are looking for a Wiring Assembler to join our team at IFAB. This role will support the wiring and assembly of electrical cabinets, contributing to the accurate and efficient assembly of electrical components. The ideal candidate has 6 months to 1 year of experience in wiring or electrical assembly, with basic knowledge of reading wiring diagrams and following work instructions. Key Responsibilities: Perform wiring and assembly tasks to produce semi-finished or final electrical cabinets, systems, and panels. Complete work manually or with light hand tools. Read and follow wiring diagrams, schematics, and work instructions. Carry out basic quality checks to ensure accuracy and compliance with standards. Operate within standard procedures and maintain a clean, safe, and organized work area. Collaborate with team members to meet production goals. Qualifications: 6 months to 1 year of experience in wiring or electrical assembly within a manufacturing environment. Basic ability to read and interpret wiring diagrams and follow work instructions. Strong attention to detail and commitment to quality. Reliable, punctual, and willing to learn. Team-oriented mindset with good communication skills. Preferred Qualifications (Nice to Have): Familiarity with electrical safety practices. Experience in a production or assembly line setting. Flexibility to work additional hours or shifts when required. Powered by JazzHR MARb3EjWdy

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: This job requires a U.S. Person. A U.S. Person is a lawful permanent resident as defined in 8 U.S.C. 1101(a)(20) or who is a protected individual as defined by 8 U.S.C. 1324b(a)(3). U.S. citizens, U.S. nationals, U.S. permanent residents, or individuals granted refugee or asylee status in the U.S. are considered U.S. persons. For a complete definition of "U.S. Person" go here. Security Clearance: None/Not Required Under direct supervision, performs routine and repetitive assembly operations and processes. Requires use of a few simple hand tools and semi-automatic manufacturing equipment including welding, cutting, and measurement operations. Ensure work is accomplished with high quality workmanship standards and safety in a timely fashion and is compliant with all company, city, state and federal regulations. What You Will Do: Learn to set up, assemble parts, and loading of parts. Demonstrate proper use of simple hand and machine tools with basic troubleshooting around machine set up and function. Learn to accurately read and follow procedures, routing, and other work instructions. Responsible for quality product standards with no defects. Able to identify part defects and escalate as needed. Responsible for building parts that meet customer deadlines and expectations while maintaining established safety and quality standards. Responsible to comply with applicable elements of quality systems and have working knowledge of how they apply to the product being produced. Participate in cost reduction plans and continuous improvement plans/events, as required. Participate in audits with positive communication practices. Acquire applicable skill/knowledge/certifications as required. Responsible for tracking and staying compliant with site training and recertification requirements. Maintain materials, equipment, and work area in a clean and orderly condition. Responsible for participating in Daily, Weekly, and Monthly cleaning activities. Rotate to different workstations throughout shift as business needs change. Complete assigned tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individual skills. Check work methods and results for conformance to standards and re-instruct as required. Report to lead or supervisor on work progress and updates including conditions surrounding failures to meet quality standards. Other duties as assigned. Qualifications You Must Have: A high school diploma or GED. In the absence of a HS diploma or GED, 2 years of relevant experience are required. U.S. Person (U.S. citizen, permanent resident, refugee or asylee) or eligible to obtain necessary export authorizations required. Qualifications We Prefer: Must be able to stand for 8+ hours. Must be available for overtime, including extended workdays and weekends. Ability to comply with EH&S policies and procedures at all times, including wearing appropriate PPE. Attend EH&S trainings as required. Ability to report unsafe practices and/or conditions to the appropriate individuals to ensure prompt resolution of potential hazards. Ability to recommend improvements to EH&S practices to create a safer workplace. Manufacturing experience is strongly preferred Career Readiness Certification (CRC) strongly preferred. The ability to interpret schematics and/or technical drawings. The ability to successfully complete training modules associated with job grade. The ability to follow assembly instruction. The ability to effectively work in an environment requiring repetitive job responsibilities. The ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. The ability to understand end uses of products being built. Strong written and verbal communication skills. Attention to detail in order to ensure safety and quality. Strong organizational skills and ability to multi-task. The ability to work in a team to support work capacity in a fast-paced environment. Intermediate computer skills in terms of typing, navigating screens and learning new software programs. Demonstrated analytical skills and problem-solving abilities. The ability to take direction from more experienced coworkers, leads and supervisors. What We Offer: Some of our competitive benefits package includes: Medical, dental, and vision insurance Three weeks of vacation for newly hired employees Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option Tuition reimbursement program Student Loan Repayment Program Life insurance and disability coverage Optional coverages you can buy: pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection Birth, adoption, parental leave benefits Ovia Health, fertility, and family planning Adoption Assistance Autism Benefit Employee Assistance Plan, including up to 10 free counseling sessions Healthy You Incentives, wellness rewards program Doctor on Demand, virtual doctor visits Bright Horizons, child and elder care services Teladoc Medical Experts, second opinion program And more! Learn More & Apply Now: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Hours: Monday-Friday; 3:00PM-11:00PM (Weekend Overtime Required) Avionics delivers advanced cockpit displays, vision systems, and comprehensive digital solutions for global government, commercial and business aviation customers. We provide connectivity and managed data services to ensure safety and seamless communication for passengers, crews, and militaries, from aircraft and airports to air traffic management. Join us in creating solutions that connect the world, one flight at a time. Start your application today. At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again. Apply now and be part of the team that's redefining aerospace, every day. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Adecco is now hiring for a Warehouse position with our client in Durham, NC. Weekly pay starts at $15.00-$16.15 per hour, with multiple shifts available. Apply today and join a dynamic team! Responsibilities: Assist the machine operator in arranging and maintaining an efficient and organized work area Remove trays of cards from boxes and place them behind the appropriate feeders Inspect trays of cards for defects, cutting, or printing errors, and ensure they meet established quality standards Load verified cards into the correct feeders to maintain continuous production Follow quality control procedures, safety rules, and emergency protocols Participate in the company recycling program and maintain a clean, orderly work environment Perform additional duties as assigned by the machine operator or supervisor Requirements: This position is entry-level, no experience needed Ability to safely and successfully perform all essential job functions Ability to meet quality and productivity standards Ability to lift and carry up to 30 lbs. Ability to stand for the entire shift and walk around the warehouse Ability to maintain regular and punctual attendance Mandatory overtime may be required Schedule: 2-2-3 Rotation (2 days on, 2 days off, 3 days on, etc.) Every Other Weekend Pay Details: $15.00 to $16.15 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Title - Sr. Electrical Assembler (Non-Licensed) Tenure: Full-Time Pay: $28 - $35 per hour We are seeking skilled Electrical personnel to assist licensed electricians in assembling and installing industrial electrical equipment and control systems in a manufacturing environment. The successful candidate will work from technical drawings, blueprints, and schematics to support installations in compliance with safety standards and client specifications. Key Responsibilities: Under the direction of a licensed electrician, the non-licensed Sr. Electrical Assembler will: Follow electrical drawings, blueprints, and schematics to support the installation of industrial electrical systems. Install, replace, or repair electrical wiring, switch boxes, receptacles, conduits, feeders, lighting fixtures, and other electrical components. Assemble and connect electrical control panels, switchgear, transformers, batteries, and power distribution equipment. Use appropriate tools and equipment, including hand tools (wrenches, cable strippers, handsaws) and power tools. Ensure compliance with all relevant safety regulations and quality standards. Qualifications: Minimum 3+ years of relevant experience in an industrial or manufacturing setting. Solid knowledge of electrical power circuits and industrial wiring systems. Proficient in reading and interpreting electrical schematics and technical documentation. Familiarity with standard hand and power tools used in electrical assembly. Must possess a valid driver's license Must have experience running/installing EMT (Electrical Metallic Tubing) Demonstrated understanding of the Occupational Health and Safety Act and workplace safety practices.

A Snapshot of Your Day At Siemens Energy, we are on a mission to make energy greener, more reliable, and more affordable. With over 170 years of pioneering spirit and innovation, we design and manufacture cutting-edge technology that sets the standard in the energy sector. Our commitment to excellence, sustainability, and innovation drives us to improve the energy landscape worldwide. As we continue to grow and push the boundaries of what's possible, we are seeking a Transformer Mechanical Assembler with a passion for excellence and innovation in medium to large power transformer manufacturing. Join us in shaping the future of energy, making it smarter, faster, and more efficient than ever before. As a Transformer Mechanical Assembler, you will be responsible for performing the final assembly of the transformer to prepare it for testing and the disassembly of the tested transformer and preparation for dispatch. This position is designed for someone who brings a blend of technical expertise, and a commitment to safety and quality compliance. As you progress in your job role, you would be able to support us in growing the department by assisting in the training and development of new hires in the organization. How You'll Make an Impact • Prepares and assembles transformer components (tanks, covers, radiators, etc.) for final assembly, operates overhead cranes and forklifts, and prepares the unit for testing • Supports the testing process and disassembles accessories post-testing to prepare the transformer for shipping and dispatch • Performs quality inspections, documents processes, and assists in developing and maintaining technical instructions for assembly and disassembly procedures • Training and mentoring of new hires into department. • Planning and reviewing the tasks to be carried out according to pre-established production plan and manufacturing standards. • Responsible to fulfill and/or to support to fulfill all protocols, policies, guidelines, and competences coming from all current system [EHS, QA, CyberSec, etc.]. What You Bring • High school degree or equivalent with relevant technical training/experience. • At least 1 years of experience in the assembly or disassembly process for large equipment. • Experience operating cranes and the ability to obtain a Crane operation certification. • Ability to use math, read and interpret complex drawings, and perform complex measurements. • Applicant must be able to obtain Keys certification test on reading and writing and Blueprint reading test offered by local community colleges. • Applicant must be able to obtain and maintain Fork Truck License and certification for working in heights. Other Key Requirements: • Successful applicants must be able to pass standard hearing, vision, and pulmonary function tests. • Must also be able to read, write, understand, and follow verbal and/or written instructions in English. • Applicants must be legally authorized for employment in the United States without need for current or future employer-sponsored work authorization. Siemens Energy employees with current visa sponsorship may be eligible for internal transfers. • Must be willing to relocate temporarily to Mexico, Brazil or Germany for on-the-job training for a period of 3 months based on the proficiency in the area of training. Appropriate relocation support and compensation will be provided. About the Team At Charlotte Power Transformers, you'll be part of a team that is passionate about making a difference in the energy sector. We offer a competitive salary, comprehensive benefits, and opportunities for professional growth and development. Be a part of our mission to deliver superior transformer solutions to the world. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. We meet the growing energy demand across 90+ countries while ensuring our climate is protected. With more than 100,000 dedicated employees, we not only generate electricity for over 16% of the global community, but we're also using our technology to help protect people and the environment. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards • Career growth and development opportunities • Supportive work culture • Company paid Health and wellness benefits • Paid Time Off and paid holidays • 401K savings plan with company match • Family building benefits • Parental leave Jobs & Careers: Equal Employment Opportunity Statement Siemens Energy and Siemens Gamesa Renewable Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. California Privacy Notice California residents have the right to receive additional notices about their personal information. Click here to read more .

Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Are you ready to build what matters? Build More Than Machines. Build a Career. Caterpillar is looking for candidates that want to build a career. You have a lot to offer, so we offer a commitment in return to you as a professional - and as a person. We offer competitive wages, quarterly bonus, paid time off, comprehensive benefits that begin on Day ONE and paid training. We don't lead our industry - our people do. Watch our video to see our team build top-of-the-line compact track loaders. 1st Shift: Monday-Thursday 6:00 am - 3:00 PM, Friday 6:00 am - 10:00 am / Monday-Friday 6:00 am - 2:00 pm 1st Shift Starting Pay: $20.20/hour * Overtime as business requires As a Product Assembler 2 at Caterpillar, you will: * Assemble/test parts, components, or systems for BCP machines according to the specified work orders and other duties as assigned. * Keep the work area clean and orderly condition. * Rotate to various positions within the Job Function area to perform related activities. * Use various tools provided in the work area to perform assembly duties and may include the use of lifting devices to move heavy components of weights of more than 35 lbs. * Follow documented procedures standard work, routings, and blueprints to perform safe and defect-free assembly and/or adjustment of components and prime product. * Follow and utilizes CPS principles of 5S, Continuous Improvement Idea reporting, Waste Elimination, and Standard Work Physical Requirements (with or without reasonable accommodation): * Ability to sit or stand for prolonged periods. * Ability to perform repetitive operations. * Ability to lift up to 35 lbs. * Ability to work in confined spaces. Basic Qualifications: * Must have 6 months of heavy equipment machine assembly experience. Top Candidates will also have or be able to: * Ability to Follow Standard Work. * Rely on independent decision-making and problem-solving to complete job tasks. * Ability to multitask and prioritize work. * Effective communication skills. * Excellent Attendance Record. Additional Information: * This is a 1st shift position. * Resumes are highly encouraged. Please do not submit a blank application (no work history or resume attached) as this may lead to disqualification. Employee Benefit Details: Our goal at Caterpillar is for you to have a rewarding career. Here you earn more than just an hourly wage. We offer a total rewards package that provides Day ONE benefits (medical, dental, vision, RX, and 401K) along with the potential of a quarterly bonus. Additional benefits include paid holidays and paid time off. Final Details: Please frequently check the email associated with your application, including the junk/spam folder, as this is the primary correspondence method. If you wish to know the status of your application - please use the candidate log-in on our career website as it will reflect any updates to your status. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as H, L, TN, F, J, E, O. As a global company, Caterpillar offers many job opportunities outside of the U.S. which can be found through our employment website at *************************** * YouTube Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube. Summary Pay Range: $20.20 - $25.25 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job-related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. Benefits: Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. * Medical, dental, and vision benefits* * Paid time off plan (Vacation, Holidays, Volunteer, etc.)* * 401(k) savings plans* * Health Savings Account (HSA)* * Flexible Spending Accounts (FSAs)* * Health Lifestyle Programs* * Employee Assistance Program* * Voluntary Benefits and Employee Discounts* * Career Development* * Incentive bonus* * Disability benefits * Life Insurance * Parental leave * Adoption benefits * Tuition Reimbursement * These benefits also apply to part-time employees Posting Dates: November 13, 2025 - November 26, 2025 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

Job DescriptionBasic Function: Responsible for assembly of mechanical and electrical parts. Operate solder pot, handle cable assembly, and test parts. Significant Responsibilities: Performs specific job responsibilities: • Assemble mechanical and electronic parts according to work instructions and assembly drawings. • Recognize cosmetic and functional discrepancies on parts and assemblies. • Operate solder pot according to work instructions. • Read Bills of Materials and Shop Packs to include the router and pick list. • Clean solder pot according to safety and operating procedures. • Perform final assembly and tests on cables. • Conduct rowing inspection of work in process. • Inspect assemblies for conformance to standards. • Operate Signature PCB test equipment. • Ensure each product passes testing requirements to standards. • Load and operate the IDC Insertion Machine. Promotes OCC's service excellence and quality. Provides excellent service to customers; builds strong relationships and team cohesiveness; focuses on quality and positive solutions; communicates respectfully; demonstrates compassion and understanding in response to customer requests/needs. Champions OCC's mission, vision, and values (as detailed in our 15 Essential Points of Success); complies with policies and procedures, ethical standards, and Code of Conduct. Minimum Qualifications Required: Education & Experience: High school diploma or general education degree (GED) is required. Must have 12 months of experience in assembly. Must be able to pass Solder Pot Certification. Essential Skills, Abilities & Knowledge: Ability to use small hand tools such as screwdrivers, nut drivers, Allen/Star/Crescent wrenches, microscope, hand crimpers, and height gauge. Ability to use soldering iron and de-soldering tools. Ability to read and follow basic instructions. Good communication skills, both written and oral. Ability to read and understand assembly drawings and work instructions. Ability to work in a team environment with minimal supervision. Pays close attention to detail with the ability to complete assignments accurately and recognize and assist in resolving problems. Computer knowledge of Microsoft Word and Excel is preferred. Working Conditions: While performing this job, the employee is regularly required to stand and walk. The employee must regularly lift and/or move up to 35 lbs and occasional lifting up to 50 lbs. The employee must have full range of motion ability, including stretching, bending, and stooping. This job requires sight sufficient for significant reading. Specific vision abilities required by this job include color vision. This work also requires an individual with hearing sufficient for extensive, direct contact with employees. The noise level in the work environment is usually moderate. The employee is regularly exposed to moving mechanical parts, fumes or airborne particles, and toxic or caustic chemicals. Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. Hours - Monday - Thursday 6:30 AM - 5:00 PM 40 hours/week

We are looking for a Wiring Assembler to join our team at IFAB. This role will support the wiring and assembly of electrical cabinets, contributing to the accurate and efficient assembly of electrical components. The ideal candidate has 6 months to 1 year of experience in wiring or electrical assembly, with basic knowledge of reading wiring diagrams and following work instructions. Key Responsibilities: Perform wiring and assembly tasks to produce semi-finished or final electrical cabinets, systems, and panels. Complete work manually or with light hand tools. Read and follow wiring diagrams, schematics, and work instructions. Carry out basic quality checks to ensure accuracy and compliance with standards. Operate within standard procedures and maintain a clean, safe, and organized work area. Collaborate with team members to meet production goals. Qualifications: 6 months to 1 year of experience in wiring or electrical assembly within a manufacturing environment. Basic ability to read and interpret wiring diagrams and follow work instructions. Strong attention to detail and commitment to quality. Reliable, punctual, and willing to learn. Team-oriented mindset with good communication skills. Preferred Qualifications (Nice to Have): Familiarity with electrical safety practices. Experience in a production or assembly line setting. Flexibility to work additional hours or shifts when required.

Adecco is now hiring for a Warehouse position with our client in Durham, NC. Weekly pay starts at $15.00-$16.15 per hour, with multiple shifts available. Apply today and join a dynamic team! Responsibilities: Assist the machine operator in arranging and maintaining an efficient and organized work area Remove trays of cards from boxes and place them behind the appropriate feeders Inspect trays of cards for defects, cutting, or printing errors, and ensure they meet established quality standards Load verified cards into the correct feeders to maintain continuous production Follow quality control procedures, safety rules, and emergency protocols Participate in the company recycling program and maintain a clean, orderly work environment Perform additional duties as assigned by the machine operator or supervisor Requirements: This position is entry-level, no experience needed Ability to safely and successfully perform all essential job functions Ability to meet quality and productivity standards Ability to lift and carry up to 30 lbs. Ability to stand for the entire shift and walk around the warehouse Ability to maintain regular and punctual attendance Mandatory overtime may be required Schedule: 2-2-3 Rotation (2 days on, 2 days off, 3 days on, etc.) Every Other Weekend Pay Details: $15.00 to $16.15 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.