Assembler jobs in North Las Vegas, NV - 21 jobs

PURPOSE This is an entry-level position that performs repetitive assembly operations to mass-produce products such as windows, doors, trusses, panels, or stairs by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES Places parts in specified relationship to each other. Bolts, clips, screws, cements, or otherwise fastens parts together. Cut products to specific measurements as needed. Removes defective products as needed. Tends machines to perform force fitting or fastening operations on assembly line. Works at different workstations as production needs require. Works in environment where tasks change as varying models of product are produced. Cleans equipment, floors, and work areas according to safety procedures. Other duties may be assigned. SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. MINIMUM REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. There are no requirements in terms of education or experience. Prior carpentry experience helpful. COMPETENCIES Ability to read and comprehend simple instructions. Ability to write simple correspondence. Verbal expression ability to effectively present information, in both individual and small group situations. Ability to add, subtract, multiply, and divide. Ability to read tape measure. Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Overtime work could be involved. WORK ENVIRONMENT / PHYSICAL ACTIVITY The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is continuously required to stand; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is continuously required to walk. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must continuously lift and /or move up to 25 pounds, frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this job, the employee is continuously exposed to moving mechanical parts and may be exposed to airborne particles. The employee is frequently exposed to outside weather conditions; extreme cold; extreme heat; risk of electrical shock and vibration. The noise level in the work environment is usually loud. Will be required to wear ear plugs for noise protection as well as eye protection and other personal protective equipment required by the location.

Nikkiso Clean Energy & Industrial Gases is a leading provider of cryogenic pumps, heat exchangers, process systems, services, and solutions for the LNG and industrial gases industry. We are a subsidiary of Nikkiso Company Ltd, a leading industrial manufacturer headquartered in Tokyo, Japan, with over $1.5 B in annual revenue, 8000 + employees worldwide, and publicly traded on the Tokyo Stock Exchange Job Overview We are currently seeking an Assembler to join our production team. This position is located at our facility in North Las Vegas, NV. Responsibilities Performs assembly of Cryogenic Pump Components and skidding as well as other tasks as assigned: Fit, align, and adjust all components, including bearings and seals and units to close tolerances and document all clearances on assembly clearance data sheet for review and approval of engineering. Check work to ensure conformance to specifications, instructions customer requirements on all drawings/blueprints and work instructions per SOP procedures. May require troubleshooting and rework parts as necessary, contribute to failure analysis when requested. Maintain tools, equipment, and work area in accordance with 5S principles. Follow all Quality, Engineering, Sales and Safety Procedures. Maintain consistent and regular attendance to meet production schedules. Ability to carefully disassemble used pumps and equipment and analyze condition of parts for possible causes of damage by operation in the field and improve reliability and customer service Keeps equipment operational by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs. Meet Customer schedules and company production schedules at better than 80% on time Qualifications Preferred experience in reading blueprint, torque vales and inspection tools. Preferred general welding experience (Tig and Mig) Preferred experience in tube bending/flaring/threading Physical Demands In order to perform the duties of this job, the employee may be required to stand, walk, sit, reach with hands and arms, climb or balance, stoop or kneel, talk and hear, and use fingers and hands to feel objects, tools or controls. Ability to lift up to 25 lbs. may be necessary. Overtime may be necessary as the workload dictates. This may include week days, weekends, nights and/or holidays. Work Environment This job operates in a warehouse environment. This role routinely utilizes the operation of material handling equipment and various tools and machinery. Environmental Safety Requirements New Employee Safety Training is required by all newly hired employees, including Safety Awareness All safety related training is provided and tracked by the EHS Manager Job specific training modules deemed necessary by employee's Manager or Director will be required of all employees on an ongoing basis Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Employees are required to wear Nikkiso provided PPE as/when needed. PPE's include, safety shoes, safety glasses, face shields, FR clothing, cryogenic gloves, cryogenic apron, cut resistant gloves, safety gloves, hearing protection, hard hats & dust masks. Failure to comply with safety requirements will result in disciplinary actions, up to and including termination. The knowledge, skills and abilities listed above are typically acquired through the levels of education and experience listed. An equivalent combination of education and/or experience that provides an applicant with the listed knowledge, skills and abilities required to perform the essential duties and responsibilities of the job, may be accepted. EEOC Statement Nikkiso CE&IG is proud to be an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Established North Las Vegas Manufacturer is looking for an entry Assembly. This person will be responsible to molded parts and verify quantity of parts made. Candidate must demonstrate a desire to learn and have a positive can-do attitude Must have the ability to stand, walk, kneel, push, pull and lift up to 50 lbs Must be able to work safely on a machine that operates at high temperatures Must be able to accurately and timely count parts in many shapes and sizes Must be computer literate and have the ability to learn and accurately perform data entry in a windows-based software Must be punctual and maintain regular attendance Ability to perform duties inside a warehouse environment Follow safety guidelines and demonstrate good work ethic Education/Training High School Diploma or equivalent Salary $12 DOE Work Environment The work environment is in a non-airconditioned and non-heated warehouse. Full or Part-Time Assembler of Electrical Connectors. Entry level or experienced, will train. Monday through Friday, weekends off. Benefits after 60 days, PTO after 90 and 401K after 1 year. We offer a great working environment, We are a family owned company and have been in business for over 59 years. Full-Time/Part-Time Full-Time and/or Part-Time About the Organization Spacecraft Components Corp. engineers, distributes, and manufactures circular harsh environment connectors primarily focused in railways/transit, military, aerospace, industrial and various harsh environment markets. We pride ourselves in the excellence of service by providing reactive and consultative circular connector solutions by utilizing our talented engineering and technical sales resources. Our AS9100 qualification ensures that our overall processes provide our customers the highest obtainable of quality standards. EOE Statement The Company is an Equal Employment Opportunity employer and makes employment decisions on the basis of merit. In accordance with applicable law, the Company prohibits discrimination based on race, color, religion, gender, sexual orientation, national origin, age, disability, veteran status or any other characteristic protected by applicable law. All such discrimination is prohibited. The Company's commitment to equal opportunity applies to all persons involved in the operations of the Company and prohibits discrimination by any employee or agent of the Company, including supervisors and coworkers. Position Requirements Good hand dexterity, able to work alone as well as with a team, able to follow instructions and attention to detail. Position Assembly Open Date 1/5/2026 <

As an assembler, you are always responsible for process safety, reporting product quality, recording production weights, proper packaging, and storing finished goods in assigned location. An Assembler is also a team player. Always maintain a safe working atmosphere. Monitoring all work processes for safe working conditions. Practice proper working procedures. Report all violations in safety policies to the Production Supervisor. Maintain a clean working area. Complete all quality checks. Inform supervisor of any safety or quality issues. Complies with all company policies and procedures. Other tasks and duties as assigned. SKILLS & QUALIFICATIONS Able to read and understand work instructions. Able to work scheduled work hours along with occasional required overtime. Able to communicate effectively. Ability to read a tape measure will be very helpful. PHYSICAL REQUIREMENTS Bending, reaching, stretching, kneeling, and stooping. Standing for up to 8 hours at a time. REPORTING This position reports to the Production Supervisor. EOE, including disability/vets

Assemblers - Urgently Hiring!! Immediate openings for experienced assemblers ideally with gaming industry experience to run production for high-volume manufacturing operations in Las Vegas, NV. In this role, the assemblers will be responsible for assembling slot machines. Assembler Responsibilities Assembling slot machines on the production floor. Reading blueprints and schematics. Ideal Candidate will have... Minimum 1 year experience in electronic assembly Ability to work overtime and weekends Recent/current experience working in a manufacturing environment. MUST BE ABLE TO PASS A YEAR BACKGROUND CHECK AND A 4 PANEL URINE DRUG TEST

Nikkiso Clean Energy & Industrial Gases is a leading provider of cryogenic pumps, heat exchangers, process systems, services, and solutions for the LNG and industrial gases industry. We are a subsidiary of Nikkiso Company Ltd, a leading industrial manufacturer headquartered in Tokyo, Japan, with over $1.5 B in annual revenue, 8000 + employees worldwide, and publicly traded on the Tokyo Stock Exchange Job Overview We are currently seeking an Assembler to join our production team. This position is located at our facility in North Las Vegas, NV. Responsibilities * Performs assembly of Cryogenic Pump Components and skidding as well as other tasks as assigned: * Fit, align, and adjust all components, including bearings and seals and units to close tolerances and document all clearances on assembly clearance data sheet for review and approval of engineering. * Check work to ensure conformance to specifications, instructions customer requirements on all drawings/blueprints and work instructions per SOP procedures. * May require troubleshooting and rework parts as necessary, contribute to failure analysis when requested. * Maintain tools, equipment, and work area in accordance with 5S principles. * Follow all Quality, Engineering, Sales and Safety Procedures. * Maintain consistent and regular attendance to meet production schedules. * Ability to carefully disassemble used pumps and equipment and analyze condition of parts for possible causes of damage by operation in the field and improve reliability and customer service * Keeps equipment operational by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs. * Meet Customer schedules and company production schedules at better than 80% on time Qualifications * Preferred experience in reading blueprint, torque vales and inspection tools. * Preferred general welding experience (Tig and Mig) * Preferred experience in tube bending/flaring/threading Physical Demands * In order to perform the duties of this job, the employee may be required to stand, walk, sit, reach with hands and arms, climb or balance, stoop or kneel, talk and hear, and use fingers and hands to feel objects, tools or controls. * Ability to lift up to 25 lbs. may be necessary. * Overtime may be necessary as the workload dictates. This may include week days, weekends, nights and/or holidays. Work Environment This job operates in a warehouse environment. This role routinely utilizes the operation of material handling equipment and various tools and machinery. Environmental Safety Requirements * New Employee Safety Training is required by all newly hired employees, including Safety Awareness * All safety related training is provided and tracked by the EHS Manager * Job specific training modules deemed necessary by employee's Manager or Director will be required of all employees on an ongoing basis Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Employees are required to wear Nikkiso provided PPE as/when needed. PPE's include, safety shoes, safety glasses, face shields, FR clothing, cryogenic gloves, cryogenic apron, cut resistant gloves, safety gloves, hearing protection, hard hats & dust masks. Failure to comply with safety requirements will result in disciplinary actions, up to and including termination. The knowledge, skills and abilities listed above are typically acquired through the levels of education and experience listed. An equivalent combination of education and/or experience that provides an applicant with the listed knowledge, skills and abilities required to perform the essential duties and responsibilities of the job, may be accepted. EEOC Statement Nikkiso CE&IG is proud to be an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Read, interpret, and follow technical documentation such as build guides, blueprints, diagrams, engineering drawings, specifications, and other written instructions or procedures to accurately assemble mechanical components and fabricated products. Perform assembly tasks with experience and proficiency at most of the mechanical assembly and sub-assembly stations. Performs calibration tests on parts and mechanisms for tolerance levels and quality; identifies failed quality and out of tolerance units, and repairs as necessary. Maintain a clean and safe work area. Assisting in other areas on the production floor as needed. Performs other duties as assigned. PREFERRED QUALIFICATIONS High school diploma or GED No experience needed, will train. Ability in using tools (e.g. drills, wrenches, screwdrivers, etc.) Willing to perform repetitive tasks while standing for extended periods of time. Maintains excellent attendance. Pre-employment drug screen and background check are required BENEFITS Health Insurance Dental Insurance Vision Insurance Supplemental Insurance Paid Time Off (PTO) Paid Holidays On job training Cross-training Opportunities for advancement PHYSICAL DEMANDS Must be able to stand, walk and lift for up to 8 hours daily. Vision abilities requires close, distance, color, peripheral, and depth Required to lift, push, pull, and/or carry up to 50 lbs. continually. May be required to stoop, bend, kneel, or crouch. Moderately loud noise levels in plant environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. JOB TYPE Full-time Hourly SCHEDULE 8-hour shift Day shift Monday to Friday ABOUT VSR INDUSTRIES VSR Industries has been a world leader for over 50 years in the casino gaming industries, manufacturing high security locks, custom fabricated sheet metal, and wood products. Corporate headquarters and manufacturing plants are located in Henderson, NV. VSR Industries is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex. Sexual orientation, gender identity, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by applicable federal, state or local law.

Job Title: Assembly Technician (Full-Time) Schedule: Day Shift, Monday-Friday Type: Full-Time, Hourly We are seeking a reliable and detail-oriented Assembly Technician to join our growing manufacturing team. This role is ideal for someone who is hands-on, mechanically inclined, and able to thrive in a fast-paced production environment. You will be responsible for assembling high-quality products by following detailed instructions, using a variety of tools, and working closely with your team to meet daily goals. No prior industry experience is required--just a strong work ethic, willingness to learn, and commitment to producing excellent results. General Duties & Responsibilities Accurately read, interpret, and follow blueprints, diagrams, engineering drawings, specifications, bills of materials, and written instructions to assemble products to exact standards. Perform mechanical and manual assembly of components, ensuring proper fit, alignment, and secure fastening of parts and subassemblies. Safely operate and maintain handheld and power tools used in the assembly process (wrenches, drills, torque tools, etc.). Inspect components and completed assemblies to identify defects, inconsistencies, or quality concerns; report issues following established procedures. Collaborate with production team members to meet or exceed daily assembly targets and maintain efficient workflow. Maintain a clean, organized, and safe workstation, adhering to all company safety guidelines and manufacturing best practices. Follow basic English-language instructions relating to safety, work orders, and assembly steps (required). Support cross-functional needs on the production floor, including packaging, materials handling, and general labor tasks when needed. Demonstrate reliable and consistent attendance, punctuality, and readiness to work. Preferred Qualifications High school diploma or GED. Ability to perform repetitive motion tasks and stand for extended periods. Strong visual acuity, including depth perception, peripheral vision, and the ability to differentiate colors. Basic mechanical aptitude or previous experience in assembly, manufacturing, or warehouse environments (preferred but not required). Benefits Health, dental, and vision insurance. Supplemental insurance options available. Paid time off (PTO) and paid holidays. 401(k) retirement plan with company participation. On-the-job and cross-training opportunities to help expand skillsets. Clear career growth and advancement potential within the production department. Physical Demands Ability to stand, walk, and perform physical tasks for up to 8 hours per day. Visual requirements include close, distance, color, peripheral, and depth perception. Ability to lift, push, pull, and carry up to 50 lbs. regularly throughout the shift. Occasional need to stoop, bend, kneel, crouch, or crawl based on assembly requirements. Comfortable working in a moderately loud manufacturing environment. Reasonable accommodations are available for individuals with disabilities.

Full-time Description ENTEK is seeking applications for multiple Assembly Technicians to join us on-site at our Henderson, Nevada, location (relocation within 40 miles of Henderson is required). As an Assembly Technician at ENTEK, you will assemble products, following blueprints, schematic drawings, and specifications, using bolts or other fastening devices to attach them to foundations or other structures. In your daily work as an ENTEK Assembly Technician, you will have the opportunity to utilize your experience to install moving parts, such as shafts, levers, or bearings, and work them to test proper movement and assemble gear systems using alignment & measurement tools while ensuring proper assembly tolerances. You will also bend and install pipe for hydraulic systems and perform layout, prep, assembly, and installation of threaded and grooved pipe. To ensure the quality and integrity of final products, you will test (or assist with testing), analyze, troubleshoot, and correct machine issues. You will participate in equipment maintenance on a daily and monthly basis. As needed and/or assigned, you will train other employees on department procedures to support the department's success and enhance quality and output. Requirements Minimum Qualifications High school diploma or GED. Four (4) years of applicable experience and/or training OR an equivalent combination of education and experience. Basic math skills Strong time-management skills. Ability to self-manage behavior. Ability to communicate effectively in written and spoken English. Ability to read, analyze, and interpret supplied documentation and instructions. Ability to define problems, establish facts, and draw valid conclusions. Satisfactory results from a pre-employment fit-for-duty screen and a drug screen. Preferred Qualifications Trade school program certificate. Two to four years related experience and/or training. Working Environment The hours for this role are Monday-Friday, 7:00 a.m. - 4:00 p.m. This role is based in a manufacturing shop environment, which may require the employee to work with or near equipment that uses water / high heat / mechanical means to create metal-based products. The incumbent will spend most of their 8-hour shifts on their feet. This role requires the incumbent to regularly lift and/or move up to 30 pounds, frequently lift and/or move up to 40 pounds, and occasionally lift and/or move up to 50 pounds. Incumbents will complete tasks that require finger dexterity, reaching, handling of materials and tools/and equipment, talking, and hearing, as well as near and far sight, peripheral vision, and depth perception. The individual in this role may be required to kneel, stoop, crouch, climb, and/or balance. The role may occasionally expose the employee to fumes and airborne particles, as well as temporarily high temperatures and temporarily bright light. This role requires wearing eye and hearing protection while working. About ENTEK ENTEK's DNA is based on a set of core values, which drive everything we do: Respect, Integrity, Innovation, and Commitment. Stop by our website at ************* to learn more about our company and the opportunities that await you. ENTEK is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. ENTEK's locations are non-smoking. Please inquire if you have questions.

Assembly Earn extra income on your terms! Join Airtasker, the community platform connecting people ready to work with those who need jobs done. With Airtasker, you decide when and where you work-choose tasks that match your skills, set your own rates, and work as much or as little as you want. No startup fees, no monthly costs-just a straightforward way to turn any skill into extra income or build a career at your own pace. Complete tasks like regular furniture assembly, trampoline assembly, excercise equipment assembly and more! Get started today! Why Join Airtasker? Flexible income: Be your own boss, set your own hours, and choose tasks that fit your schedule. Easy start: Most tasks require no special licensing or vetting, so you can start right away. Wide variety of tasks: Find everything from handyman work and pet care to skilled trades and creative gigs. Build your reputation: Stand out with reviews, earn badges, and increase your visibility to customers. Lower fees for loyal Taskers: Complete more tasks to enjoy lower service fees over time. Requirements: Age 18 or older Own an iPhone or Android smartphone Have the tools and skills for accepted jobs Commit to excellent customer service Keep work on the platform so we both earn! No need to apply-simply sign up on Airtasker.com, browse available tasks, and start making offers today! Start earning now!

Every day, ANDRITZ continues to deliver successful innovative solutions to our customers globally. Why are we so successful? Because we are passionate and love what we do! We are at the forefront of future engineering technologies, with solutions that ensure the success of our clients in key industries that are shaping the future of the world we live in. Summary Provides hands-on daily work of machine assembly operations. Will work under limited supervision from the Repair Center Supervisor. Reads and interprets blueprints and engineering instructions. Uses hand tools, power tools, measuring devices and electromechanical equipment. Education and Experience High school graduate or GED preferred plus trade knowledge equivalent to completion of an apprenticeship program. Typically has 5+ years of machine assembly experience. Some experience as a working supervisor preferred. Principal Duties * Day to day responsibility for disassembly Inspection, documentation, balancing, assembly and testing of all machines processed through the repair department. * Read and follow proper shop procedures. Must ensure all drawings, Engineering bulletins and any other type documentation is available and followed while executing basic assembly, test setups and fixtures * Works from engineering drawings, specifications and verbal instructions. * Interface with customer's on occasional review of repairs while protecting Andritz confidential information. * Well organized, able to read O.D./I.D Micrometer and other measuring tools to insure dimensions are accurate. Organize disassembly and reassembly pictures. Good writing skills when describing root cause or reporting information to assist in quote preparation. * Following the Quality Plan and assuring that Andritz Separation proper procedure and sign off duties are followed before any product shipment. * Performs skilled fitting where prescribed tolerances are exacting and difficult to attain and meets all established quality standards. * Interprets Production Order instructions. * Plans assembly methods and procedures to assure efficient and timely progress. Ensure accurate time is charged to each production order and each operation is completed in SAP and forwarded to the next work center. * Troubleshooting of machines. It will be common to have a machine on the test stand and have to troubleshoot high vibration, temperature, noise, etc. * Plans assembly methods and procedures to assure efficient and timely progress. * Will understand delivery commitments and will plan accordingly to meet these scheduled commitments while understanding the company objective to meet a 90%+ annual on-time delivery criteria. * Follows all safety rules and regulations. Keeps work area clean and organized. * Maintains hand tools and plant equipment in good condition and reports all broken tools. * Ensure 5s procedures are implemented; maintained and scheduling goals are met. * Provides feedback to Production Manager regarding performance issues. Suggests improvements to work process. Communicates with Production Manager and Department Lead Men to resolve production issues. * Maintain organization of department and will perform regular preventive maintenance schedules on equipment. * This position description is not intended to be all inclusive, and employee will also perform other reasonably related business duties as assigned by immediate supervisor and other management as required. * This organization reserves the right to revise or change job duties as the need arises. This position description does not constitute a written or implied contract of employment. Specialized Job Skills Must be able to use most hand tools and have well developed mechanical aptitude. Must have ability to use precision measuring instruments and the ability to read and interpret engineering drawings and blueprints. Machinist skills. Experience in maintenance of rotating equipment and gear box repair a plus. Physical Demands The physical demands of this position require the ability to walk, sit or stand for long periods of time. Must be physically able to lift a minimum of 75 pounds and have the dexterity to bend and stoop for long periods of time. Make visual inspections with precise hand and finger movements, with reasoning and problem solving ability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or disability. Requisition ID: 19638 Nearest Major Market: Las Vegas

Founded in 1989, Desert Lumber and Building Materials supplies customers with specialty building materials from multiple locations across Las Vegas, NV. Operations that include 2 Lumber Yards, Floor and Roof Truss Manufacturing, Desert Fasteners, and Desert Window Systems. . The Seasonal Truss Assembler I is responsible for assembling truss components. This position will stock lumber, plates and other work-related materials and supplies. Will also band/stack finished products. What you will do • Lay out truss supplies and materials on carts or floor and stock plates for component set-up. • Assemble components under the direction of the line leaders. • Load and band finished materials on carts/pallets inside and/or outside. • Receive incoming products, commodities, and materials. • Read shop drawings to identify plate sizes, plate gauges, girder truss nailing and bolt patterns. • Read shop drawings to understand stacking order when required. • Monitor production workflow process assisting other areas as needed. • Operate all equipment necessary to the assembly process. • Adhere to established safety rules and regulations and follows all safety procedures; maintain a safe environment. • Comply with Company's attendance policy by maintaining regular and predictable attendance. • Assist in maintaining an organized work environment which may include emptying trash receptacles and keeping all bays/staging areas clean and organized. • Provide excellent customer service and participate in a positive work environment. • Monitor inventory as required by location management. • Retain an awareness of the work environment critical to the task at hand to produce error free and damage free results. • Participate in and complete assigned trainings. Required For All Jobs • Perform other duties as assigned. • Comply with all policies and standards. • Adheres to Company's commitment to workplace safety. Education Qualifications • High School Diploma or equivalent work experience required. Experience Qualifications • Prior carpentry experience preferred. Skills and Abilities • Must be able to read a tape measure and use a hammer. • Ability to learn to operate equipment such as routers, saws, presses, and staple guns. Additional Potential Opportunities based on experience: • Truss Assembler II • Truss Assembler III • Truss Assembly Lead . Desert Companies , a Division of US LBM Holdings, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.

PURPOSE This is an entry-level position that performs repetitive assembly operations to mass-produce products such as windows, doors, trusses, panels, or stairs by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES Places parts in specified relationship to each other. Bolts, clips, screws, cements, or otherwise fastens parts together. Cut products to specific measurements as needed. Removes defective products as needed. Tends machines to perform force fitting or fastening operations on assembly line. Works at different workstations as production needs require. Works in environment where tasks change as varying models of product are produced. Cleans equipment, floors, and work areas according to safety procedures. Other duties may be assigned. SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. MINIMUM REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. There are no requirements in terms of education or experience. Prior carpentry experience helpful. COMPETENCIES Ability to read and comprehend simple instructions. Ability to write simple correspondence. Verbal expression ability to effectively present information, in both individual and small group situations. Ability to add, subtract, multiply, and divide. Ability to read tape measure. Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Overtime work could be involved. WORK ENVIRONMENT / PHYSICAL ACTIVITY The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is continuously required to stand; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is continuously required to walk. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must continuously lift and /or move up to 25 pounds, frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this job, the employee is continuously exposed to moving mechanical parts and may be exposed to airborne particles. The employee is frequently exposed to outside weather conditions; extreme cold; extreme heat; risk of electrical shock and vibration. The noise level in the work environment is usually loud. Will be required to wear ear plugs for noise protection as well as eye protection and other personal protective equipment required by the location.

Established North Las Vegas Manufacturer is looking for an entry Assembly. This person will be responsible to molded parts and verify quantity of parts made. Candidate must demonstrate a desire to learn and have a positive can-do attitude Must have the ability to stand, walk, kneel, push, pull and lift up to 50 lbs Must be able to work safely on a machine that operates at high temperatures Must be able to accurately and timely count parts in many shapes and sizes Must be computer literate and have the ability to learn and accurately perform data entry in a windows-based software Must be punctual and maintain regular attendance Ability to perform duties inside a warehouse environment Follow safety guidelines and demonstrate good work ethic Education/Training High School Diploma or equivalent Salary $12 DOE Work Environment The work environment is in a non-airconditioned and non-heated warehouse. Full or Part-Time Assembler of Electrical Connectors. Entry level or experienced, will train. Monday through Friday, weekends off. Benefits after 60 days, PTO after 90 and 401K after 1 year. We offer a great working environment, We are a family owned company and have been in business for over 59 years.

Job Description Read, interpret, and follow technical documentation such as build guides, blueprints, diagrams, engineering drawings, specifications, and other written instructions or procedures to accurately assemble mechanical components and fabricated products. Perform assembly tasks with experience and proficiency at most of the mechanical assembly and sub-assembly stations. Performs calibration tests on parts and mechanisms for tolerance levels and quality; identifies failed quality and out of tolerance units, and repairs as necessary. Maintain a clean and safe work area. Assisting in other areas on the production floor as needed. Performs other duties as assigned. PREFERRED QUALIFICATIONS High school diploma or GED No experience needed, will train. Ability in using tools (e.g. drills, wrenches, screwdrivers, etc.) Willing to perform repetitive tasks while standing for extended periods of time. Maintains excellent attendance. Pre-employment drug screen and background check are required BENEFITS Health Insurance Dental Insurance Vision Insurance Supplemental Insurance Paid Time Off (PTO) Paid Holidays On job training Cross-training Opportunities for advancement PHYSICAL DEMANDS Must be able to stand, walk and lift for up to 8 hours daily. Vision abilities requires close, distance, color, peripheral, and depth Required to lift, push, pull, and/or carry up to 50 lbs. continually. May be required to stoop, bend, kneel, or crouch. Moderately loud noise levels in plant environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. JOB TYPE Full-time Hourly SCHEDULE 8-hour shift Day shift Monday to Friday ABOUT VSR INDUSTRIES VSR Industries has been a world leader for over 50 years in the casino gaming industries, manufacturing high security locks, custom fabricated sheet metal, and wood products. Corporate headquarters and manufacturing plants are located in Henderson, NV. VSR Industries is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex. Sexual orientation, gender identity, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by applicable federal, state or local law. Job Posted by ApplicantPro

Assembly Earn extra income on your terms! Join Airtasker, the community platform connecting people ready to work with those who need jobs done. With Airtasker, you decide when and where you work-choose tasks that match your skills, set your own rates, and work as much or as little as you want. No startup fees, no monthly costs-just a straightforward way to turn any skill into extra income or build a career at your own pace. Complete tasks like regular furniture assembly, trampoline assembly, excercise equipment assembly and more! Get started today! Why Join Airtasker? Flexible income: Be your own boss, set your own hours, and choose tasks that fit your schedule. Easy start: Most tasks require no special licensing or vetting, so you can start right away. Wide variety of tasks: Find everything from handyman work and pet care to skilled trades and creative gigs. Build your reputation: Stand out with reviews, earn badges, and increase your visibility to customers. Lower fees for loyal Taskers: Complete more tasks to enjoy lower service fees over time. Requirements: Age 18 or older Own an iPhone or Android smartphone Have the tools and skills for accepted jobs Commit to excellent customer service Keep work on the platform so we both earn! No need to apply-simply sign up on Airtasker.com, browse available tasks, and start making offers today! Start earning now!

Under direct supervision, performs one or more repetitive jobs on an assembly or sub-assembly line to produce building material components or millwork products. * Assembles building material components such as wall panels, roof and floor trusses and/or millwork products such as doors, windows, cabinets, counters, vanities or closets. Processes include insertion or positioning of materials, clamping, splicing, fitting parts and use of both hand and power tools. Requirements: High school diploma or General Education Degree (GED) or related work experience. This is an entry level position where the incumbent will receive on-the-job training. Knowledge of and ability to use a variety of hand and power tools to assemble either building materials components or millwork products.

Under direct supervision, performs one or more repetitive jobs on an assembly or sub-assembly line to produce building material components or millwork products. * Assembles building material components such as wall panels, roof and floor trusses and/or millwork products such as doors, windows, cabinets, counters, vanities or closets. Processes include insertion or positioning of materials, clamping, splicing, fitting parts and use of both hand and power tools. Requirements: High school diploma or General Education Degree (GED) or related work experience. This is an entry level position where the incumbent will receive on-the-job training. Knowledge of and ability to use a variety of hand and power tools to assemble either building materials components or millwork products.

Under direct supervision, performs one or more repetitive jobs on an assembly or sub-assembly line to produce building material components or millwork products. * Assembles building material components such as wall panels, roof and floor trusses and/or millwork products such as doors, windows, cabinets, counters, vanities or closets. Processes include insertion or positioning of materials, clamping, splicing, fitting parts and use of both hand and power tools. Requirements: High school diploma or General Education Degree (GED) or related work experience. This is an entry level position where the incumbent will receive on-the-job training. Knowledge of and ability to use a variety of hand and power tools to assemble either building materials components or millwork products.