Assembler jobs in Oregon - 105 jobs

Primary Job Function This bonus eligible position is responsible for assembling and attaching components and hardware in a prescribed manner using power or hand tools, and other equipment to complete units or sub-assemblies at a bench, conveyor line, or on the floor, check for proper fit or adjustment and make necessary adjustments. Essential Duties and Responsibilities Reads travelers, prints and assembly documentation Assembles parts or sub-parts using power or hand tools; checks for proper fit, makes adjustments. Performs visual inspection of completed assembly May assist with packaging and shipping or other production areas as needed May instruct and direct less experienced operators Cleans and organizes workstation Maintains tools Follows established safety protocols including required usage of PPE; helps to maintain a safe working environment . Keeps work area clean and organized Performs other duties as assigned Qualifications Minimum Qualifications and Experience Minimum skills, knowledge, education, certifications and related job experience that employee typically must have to perform essential functions of the job acceptably. Ability to use tools including (but not limited to): Rivet gun Wrenches, screw drivers Impact wrenches Torque drive tooling Various power/hand tools Accurate usage of tape measure Fixture and Testing equipment Basic math and measurement skills Strong attention to detail Dependability; honesty & integrity; a positive, proactive attitude; ability to use time productively, working with minimal supervision both individually and as part of a team. Ability to read, write, and communicate effectively in English. Ability to work overtime as required Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to: (a) stand (up to 8 hours per shift), (b) walk, (c) use hands to touch, (d) reach with hands and arms, (e) climb or balance, (f) stoop, (g) kneel, crouch, or crawl, and (h) and talk or hear. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. May be exposed to noise, dust, fumes, airborne particles, smoke and temperature extremes within OSHA Permissible Exposure Levels. Pay and Benefits Our pay ranges are guided by the discipline, level, and experience required. Within the range, individual pay may vary based on various factors, including desired skills/ technical competency, relevant experience, transferrable skills, and advanced education/ training. Benefits include Medical, Dental, Vision, Life, AD&D, LTD, EAP, Paid Time Off, 401(k) with Employer Contribution, Paid Holidays, as well as a Quarterly + Annual Bonus program. Signing Bonus To welcome you to our team and show our commitment to your success, we are offering a signing bonus of $500.00! This bonus will be awarded in two installments, 50% upon successful completion of probationary period and the balance paid upon completion of one year of service with IMC. About IMC Integrated Metal Components, Inc. (IMC) was founded in 1995 with the mission to deliver high-quality, on-time products while building lasting partnerships with our customers. We combine cutting-edge precision equipment with a team of highly trained employees to ensure our customers receive the best possible products. Through collaboration, innovation, and an unwavering commitment to excellence, IMC aims to be a trusted, single-source solution for all sheet metal manufacturing needs. At IMC, our business is built on eight key principles: Quality On-Time Delivery Exceptional Customer Service Integrity Developing Partnerships Competitive Pricing Consistent Performance Ongoing Improvement Additional Information Integrated Metal Components, Inc. (IMC) is an equal opportunity employer. We are committed to creating a diverse and inclusive workplace and do not discriminate against any employee or applicant based on race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, genetic information, veteran status, or any other characteristic protected by applicable law. IMC complies with all federal, state, and local laws regarding nondiscrimination in employment. We encourage candidates of all backgrounds to apply. Integrated Metal Components, Inc. (IMC) participates in E-Verify to confirm the employment eligibility of all newly hired employees. For more information about E-Verify, please visit *****************

Our Culture DZYNE Technologies is leading the future of autonomous defense. Based in Irvine, California, we develop and manufacture advanced airborne and ground-based defense solutions deployed in over 50 countries. Backed by U.S. Government Programs of Record, our technologies are field-proven, scalable, and production-ready. We're growing fast and looking for innovators ready to make an impact. At DZYNE, you'll join a culture built on collaboration, integrity, and purpose. We celebrate wins, value diverse perspectives, and support every team member's success. Ready to do work that matters? Join us. Position: Production Assembler/Technician Location: Portland, OR Position Description: The person in this role will support the manufacturing, production, and service of products. This includes the on-time assembly, testing, quality, packaging, and shipping of US and international sales orders. This position also has duties associated with the receiving of both inventory and non-inventory materials and supply items, inventory management and accuracy, processing WO's, and conducting transactions in our ERP system. You will produce new units as well as conduct repairs. Repair activities include: evaluating, estimating, and performing repairs, modification or overhaul of customer returned units to manufacturing specifications. Required Skills: * Experience with shipping and receiving, and inventory management * Understanding of manufacturing processes * Ability to navigate ERP systems Preferred Skills/Qualifications: * 5+ years' experience working in an electro-mechanical manufacturing environment * Previous experience working in an ITAR/Export Controlled environment. Education: Associate's degree, or equivalent combination of education and experience. Travel: Limited Working Conditions: The diversity of work conditions may range from an environment where there is little or no physical discomfort, such as a general office environment, to warehouse and other facilities. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. * Must have the ability to stoop, stand, climb, occasionally lift a minimum of 40 lbs. * Involves movement between departments, floors, and worksites to facilitate work * May be performing physical activities including but not limited to climbing in and out of equipment, crawling, and working outdoors Other Requirements: (if a clearance level is not required) It is an essential requirement for the person in this role to have a legal right to work in the United States. Salary: $25.50 - $40.00 per hour Salary depends on relevant work experience, education, training, essential skills, and/or other factors such as specialized or high-demand professions. In addition to the annual salary, the position will be eligible for an annual bonus. The pay range for this job level is a general guideline only and not a guarantee of salary or annual bonus. Benefits: Our benefits are DZYNE'ed for your overall health and financial wellness. DZYNE provides comprehensive medical, dental, and vision plans, employee life and accidental death, and disability. DZYNE Technologies is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, national origin, disability, or protected veteran status. In addition to federal law requirements, DZYNE Technologies complies with applicable state and local laws governing nondiscrimination in employment in every location in which our company has facilities. This policy applies to all terms and conditions of employment. #LI-ONSITE Pay Range: $25.52 - $40.00 per hour

Assembly Team Member 🛠️ Pay: $18.50-$23.44/hour Schedule: Monday-Friday, 5:00 AM-3:30 PM | OT available Saturdays About the Role: Join our team and help bring products to life! As an Assembly Team Member, you'll assemble parts and sub-assemblies using standard tools and procedures, all while working in a supportive team environment. If you enjoy hands-on work and teamwork, this role is for you. 🤝 Why You'll Love Working Here: Competitive pay + overtime opportunities Medical, dental & vision insurance 401(k) with company match Paid time off & holidays Employee referral program Career growth & development opportunities What You'll Do: Assemble components and sub-assemblies with precision Use tools and equipment safely Follow quality standards and company procedures Perform routine, repetitive tasks efficiently Support teammates and assist with other duties as needed Qualifications Qualifications: Basic knowledge of assembly techniques, materials, and blueprint reading preferred Comfortable using precision measuring tools Ability to lift 55 lbs frequently (up to 80 lbs occasionally) 💪 Positive attitude and willingness to learn Apply today and become part of a team that values safety, quality, and collaboration! ✨ Etnyre International is an affirmative action employer and provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Immediate Opportunity: Manufacturing Assembler in Eugene, OR - Urgently Hiring! Job Title: Manufacturing Assembler Pay: $17.50/hr Hours: Monday-Thursday 6:00 AM - 4:30 PM As a Mobility Assembler, you'll play a vital role in supporting daily operations through mechanical, hydraulic, pneumatic, and plumbing assembly work. You'll work closely with your team to ensure projects meet production goals and uphold the highest standards of quality. What You'll Do: As a Mobility Assembler, you will be responsible for: Performing mechanical, hydraulic, pneumatic, and plumbing assembly work. Cutting, shaping, and installing sheet metal panels. Installing mechanical assemblies and plumbing components. Executing carpentry and construction duties associated with mobility projects, such as building walls, floors, cabinets, and partitions. Maintaining a clean, tidy, and safe workspace. Meeting daily production goals as set by the Production Manager. Completing other duties as assigned. What You'll Bring: The ideal candidate for this role will have: Ability to lift/move up to 50 pounds of material without assistance and over 50 pounds with help. Physical fitness to sit, bend, or stand for extended periods. Visual acuity for reading instructions, operating machines, and inspecting produced parts. Experience operating a variety of hand tools and machinery. A high school diploma or GED equivalent. Proficiency in reading a tape measure. One year of work experience, preferably in manufacturing. Carpentry and mechanical experience are preferred. Knowledge of trailers and container-based systems is a strong plus. Why Join Us in Eugene? Flexible hours that promote work-life balance. Competitive pay and great benefits to support your financial well-being. Supportive team culture where your contributions truly matter. Enjoy affordable health and prescription coverage with no waiting period. Retirement plan options available once hired permanently. Location & Schedule: This position is on-site in Springfield, OR, offering a consistent Monday-Thursday schedule. Ready to Take the Next Step? If you're ready to start a rewarding career as a Mobility Assembler in Eugene, apply today or contact our recruiting team to learn more. Don't wait, we're hiring now! #STEUG

Work Schedule Second Shift (Afternoons) Environmental Conditions Adherence to all Good Manufacturing Practices (GMP) Safety Standards, Cleanroom: no hair products, jewelry, makeup, nail polish, perfume, exposed piercings, facial hair etc... allowed Job Description As part of the Thermo Fisher Scientific team, you'll discover meaningful work that makes a positive impact on a global scale. Join our colleagues in bringing our Mission to life every single day to enable our customers to make the world healthier, cleaner and safer. We provide our global teams with the resources needed to achieve individual career goals while helping to take science a step beyond by developing solutions for some of the world's toughest challenges, like protecting the environment, making sure our food is safe or helping find cures for cancer. Location/Division Specific Information: Our Hillsboro site produces world-class electron microscopes used by scientists and engineers to drive innovation around the globe. This role works to produce-high quality components used in the world's finest tools used by researchers like Nobel prize winners and the teams who imaged the COVID-19 virus! How Will You Make an Impact?: Thermo Fisher Scientific Hillsboro campus is on the cutting edge of global technology in pursuit of enabling our customers to make the world a Healthier, Cleaner and Safer place. A Day in the Life: Conduct assembly, alignments, and final configurations of components. Conduct assembly work applying prescribed methods using a variety of hand tools, fixtures, and test equipment. Collect test data, use databases and other office programs to document the manufacturing process. Participate in resolving production challenges and making process decisions. Assist in the selection and/or set-up of specialized equipment. Perform a wide variety of troubleshooting to identify and resolve issues. Perform equipment set-up, calibration, and preventative maintenance. Follow audit and safety guidelines. Participate in continuous process improvement. Education: High school diploma or equivalent required. Experience: 1 year of manufacturing or mechanical assembly experience required. Experience in lean manufacturing, 6S and continuous improvement a plus. Previous assembly experience in a Clean Room environment is a plus. Experience with Windows-based and MS Office programs (Word, Excel, Division-Specific Outlook and Access). Knowledge, Skills, Abilities: Demonstrated ability in efficiently working in a Team of 8-10 colleagues. Ability to analyze and address problems independently as well as collaboratively. Ability to support projects, perform training and work efficiently as part of cohesive teams. Self-motivated, self-starter with strong organizational skills. Physical Requirements / Work Environment Ability to lift-up to 35lbs. Strong verbal and written communication skills, successful in partnering with colleagues of differing cultural, language, and educational backgrounds. Ability to work in appropriate PPE. What We Offer: Compensation Competitive Hourly Pay Rate Additional shift differential for 2nd shift and 3rd shift positions Annual performance-based bonus Annual merit performance-based increase Excellent Benefits Benefits & Total Rewards | Thermo Fisher Scientific Medical, Dental, & Vision benefits-effective Day 1 Paid Time Off & Designated Paid Holidays Retirement Savings Plan Tuition Reimbursement Employee Referral Bonus Career Advancement Opportunities

The Production Home Assembler follows work orders and instructions in order to accurately and efficiently prepare and assemble building components and homes in a factory assembly line environment. Essential Duties and responsibilities: Operate various hand tools, power tools and equipment used to complete carpentry duties including: Circular Saw Table Saw Router Pneumatic Nail Gun (roofing, framing and finish work) Drills And other tools needed for measuring, cutting, fastening, and drilling Frame, layout and build floors Prepare, layout and build walls Layout, run and install electrical lines, switches, receptacles and panels/breaker boxes Install and prepare dry for finish tape, mud and texture Complete roof construction, decking, flashing and shingling Cabinet and or finish carpentry and trim, build and installation Installation of siding, windows and doors Painting of interior and exterior of homes Cooperate and promote a team concept with all other company employees Adhere to all rules and regulations, at all times Meet or exceed company safety standards Perform other tasks as assigned by management Minimum Qualifications: Must be at least 18 years of age Must be legally authorized to work in the United States Be able to read, write, and speak English High School diploma, preferred Knowledge, Skills and Abilities: Ability to read a tape measure Possess basic construction knowledge and comfortable using basic tools Excellent attention to detail Ability to read blueprints, a plus Ability to work in a fast-paced environment and multi-task Ability to trouble shoot and problem solve in a high-volume Versatility and willingness to transfer into various departments when necessary You must be able to communicate efficiently and clearly with other Team Members Working conditions: Continuous exposure to heat, cold, noise, and working outdoors. Must wear protective equipment while at the location Physical requirements: Requires walking, sitting, lifting, pushing, pulling and climbing to a significant degree Heavy Work-Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds or force frequently, and/or up to 10 pounds of force constantly to move objects While performing the duties of this job, the employee is regularly required to talk and hear, in order to communicate to employees as well as function safely around construction equipment Disclaimer: “This is intended to provide general information about the position. It is not an employment contract. As with all positions, the responsibilities and duties of this position may change. The company, in its discretion, may alter this job description at any time with or without notice.” EEO/AA Statement: Cavco Industries Inc., and all of its Subsidiaries are an EEO/AA (equal opportunity/affirmative action) institution and does not discriminate on the basis of sex, age, race, color, religion, physical or mental disability, creed, national origin, veteran status, sexual orientation, genetic information, gender identity, or gender expression in the programs or activities which it operates.

TempToFT Structural Assembler (1710423) $18-$23 per hour DOE Grants Pass, OR Full Time; Temp-To-Hire Culture: » Enjoy a 3-day weekend each week! Monday-Thursday work week » Medical benefits, life & short-term disability insurance and paid time off » Join a stable, successful organization in business for 20+ years » Work with a skilled team of professionals Daily Workflow: » Under direct supervision, assist in the assembly of large shelters and enclosures » Perform all assembly duties in a safe & efficient manner. » Extensive use of tape measure and hand tools » Assist with framework & insulation » Apply adhesives to surfaces and laminate materials » Screw or rivet steel exterior panels to framework » Assist in other operations as required. » Utilize power drivers, hand held shears, pneumatic drills & riveters » Operate mechanical shears and press brakes We are Seeking: » Physically demanding: extensive lifting, bending and other motions » Ability to read blueprints of simple structural drawings » Previous construction, door hanging, or welding experience required » Must have experience using power tools, hand tools, and other fabrication equipment » Able to pass a drug test (THC OK) Schedule: » Monday-Thursday; 6am to 4:30pm (Fridays optional for 6 hours overtime) Equal Opportunity Employer: Employees and applicants are provided a full and fair opportunity for employment, career advancement, and access to programs without regard to race, color, religion, national origin, disability (physical or mental), sex, age, sexual orientation, genetic information, or parental status, and will not be discriminated against for any other legally protected group or status

Job Description BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION Under the direction of the Department Production Supervisor and in cooperation with the Team Leader, safely perform a variety of tasks to correctly assemble, fit, and join components in the production process of heavy and large mechanical products, per specifications and in accordance with the production schedule, making independent decisions with minimal direct supervision given appropriate instructions. Key Deliverables · Use tools properly to make or repair parts and products. · Collaborate with other line workers in order to assemble products. · Comply with all company and industry safety requirements. · Accurately documents, such as diagrams, schematics, blueprints, or other verbal or written instructions. · Identify any defective items and handle them according to establish procedures. Key Activities & Responsibilities · Cleans and assembles component parts, machined parts, and subassemblies · Uses various hand tools, pneumatic tools, hydraulic tools, and precision measuring instruments to complete tasks · Removes burrs and rough spots from parts with hand file, hone stone, or portable pneumatic grinder · Operates overhead cranes and forklifts to move parts and materials in and out of work area and to assemble large components · Performs minor adjustments, repairs, or setups to equipment or machines under supervision · Perform all required job functions in a safe manner consistent with plant safety standards and report any problems immediately to the team leader or Department Supervisor. · Other duties as assigned: may include basic welding, washing, primer and painting of components or assemblies · Other duties as assigned: may include basic welding, washing, primer and painting of components or assemblies To be successful in this role, your experience and competencies are: · High School Diploma or General Education Degree (GED) preferred. · 0-2 Years Heavy equipment manufacturing experience desired. · Knowledge of commonly used mechanical concepts, practices, and procedures required. · Relevant trade school or college course work desired. · Ability to correctly use and read a tape measure, and read/understand job-related blueprints, required. · Ability to read drawings and blueprints accurately. · Able to operate overhead cranes and forklifts. · Computer experience desired, particularly the ability to use a mouse, and locate and open/close files. · Must be dependable, dedicated to completing work assignments correctly, and use time wisely. · Adept at problem-solving. Adaptable to new situations and challenges. Open to changes and new ideas. · Ability to satisfactorily work alone with reasonable and appropriate instructions, training, and supervision, and ability to work with others respectfully and professionally in a team environment. · Ability to communicate clearly and completely, expressing needs, and asking questions. · Ability to sufficiently carry out detailed and written and/or oral instructions. · Ability to handle the demand that accompanies production standards and deadlines. · Ability to accept constructive criticism and make subsequent adjustments, and willingness to rework incorrect tasks completed by oneself or others. Supervisor and Leadership Expectations None Our Culture and Values Employees that become part of Astec embody the values below throughout their work. · Continuous devotion to meeting the needs of our customers · Honesty and integrity in all aspects of business · Respect for all individuals · Preserving entrepreneurial spirit and innovation · Safety, quality and productivity as means to ensure success WORK ENVIRONMENT Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person's veteran status or any other characteristic protected by law or executive order.

North America's leading manufacturer of custom heating, ventilation, and air conditioning (HVAC) equipment in needs Assemblers to join their team! Assembler will prepares air handler units for assembly in working shop floor. Candidates will be assisting and being trained from advanced assemblers. Job Description Details: •Cleaning Air Handling Units •Installing filters •Basic assembly duties •May operate a screw gun •Installs wall panels, doors and internal parts •Finish caulking work •Helps install fans and filter racks Qualifications: •Able to work independently and with others •Able to stand for long periods on a concrete floor •Able to lift up to 40lbs •Must have average manual dexterity •Able to climb ladders •Able to read a tape measure •Must speak, read, write English Additional Information ASSIGNMENT LENGTH: 12+month contract with possibility of permanent placement

Leader in security and fire safety is searching for a qualified and OHIO CERTIFIED fire alarm inspector to perform all job responsibilities effectively. North America's leading manufacturer of custom heating, ventilation, and air conditioning (HVAC) equipment in needs Assemblers to join their team! Position Overview: Assembler will prepares air handler units for assembly in working shop floor. Candidates will be assisting and being trained from advanced assemblers. Job Description Details: •Cleaning Air Handling Units •Installing filters •Basic assembly duties •May operate a screw gun •Installs wall panels, doors and internal parts •Finish caulking work •Helps install fans and filter racks Qualifications: •Able to work independently and with others •Able to stand for long periods on a concrete floor •Able to lift up to 40lbs •Must have average manual dexterity •Able to climb ladders •Able to read a tape measure •Must speak, read, write English Additional Information ASSIGNMENT LENGTH: 12+month contract with possibility of permanent placement

Assembler Interested candidates should send an updated resume to [email protected] is onsite Duration: anticipated yearlong contract Navigate computer-based work instructions to install parts and hardware using hand tools and fixtures as needed on wafer fabrication equipment (WFE) in a Lean manufacturing clean-room environment. Responsibilities * Use hand tools, torque wrenches, equipment, and fixtures to assemble WFE. * Read and navigate work instructions and schematics. * Work collaboratively in teams to maintain workflow and production schedules. * Provide flexibility for changing priorities, including rework and pilot build projects. * Verify correct parts delivery and perform visual inspection of components prior to installation. * Assist with audits through visual inspection and checklist verification. * Close assigned tasks by: * Verifying work completion. * Confirming Cell Fusion was completed. * Signing off and providing a description of work performed. * Install parts and hardware correctly by following Cell Fusion instructions and using tools/fixtures as needed. * Consistently exhibit behaviors aligned with Lam's core values. Safety Protocol * Complete all required safety training. * Follow safe work practices: * Lift no more than 35 pounds. * Use ergonomic pads and stretch as needed. * Adhere to personal and product safety guidelines: * Utilize appropriate PPE. * Follow clean-room procedures. * Comply with Lockout Tagout (LOTO & ZEST) policies. * Use fixtures (hoists, cranes, lifting tools) for assembly. * Perform Risk Management By Walking Around (RMBWA): * Document, correct, and/or escalate safety hazards. * Support a safe work environment by: * Responding quickly to unsafe practices. * Escalating unresolved issues (e.g., incorrect hoist use, poor tool placement, PPE misuse). Communication * Demonstrate effective written and verbal communication skills in English. * Respond promptly to supervisors and co-workers via phone, email, or in person. * Actively participate in meetings and training. * Identify and communicate production issues clearly. * Suggest continuous improvements verbally or in writing. * Communicate system status during shift pass-down. Physical Requirements * Work 12+ hour shifts in a fast-paced, time-sensitive environment. * Lift and install parts up to 35 pounds manually. * Perform tasks at a working height of 22" from the ground. * Frequently kneel, crouch, and squat. * Use manual tools (e.g., box wrench, cable tie cutters). * Reach into machines constantly. Apex Systems is a world-class IT services company that serves thousands of clients across the globe. When you join Apex, you become part of a team that values innovation, collaboration, and continuous learning. We offer quality career resources, training, certifications, development opportunities, and a comprehensive benefits package. Our commitment to excellence is reflected in many awards, including ClearlyRated's Best of Staffing in Talent Satisfaction in the United States and Great Place to Work in the United Kingdom and Mexico. Apex uses a virtual recruiter as part of the application process. Click here for more details. Apex Benefits Overview: Apex offers a range of supplemental benefits, including medical, dental, vision, life, disability, and other insurance plans that offer an optional layer of financial protection. We offer an ESPP (employee stock purchase program) and a 401K program which allows you to contribute typically within 30 days of starting, with a company match after 12 months of tenure. Apex also offers a HSA (Health Savings Account on the HDHP plan), a SupportLinc Employee Assistance Program (EAP) with up to 8 free counseling sessions, a corporate discount savings program and other discounts. In terms of professional development, Apex hosts an on-demand training program, provides access to certification prep and a library of technical and leadership courses/books/seminars once you have 6+ months of tenure, and certification discounts and other perks to associations that include CompTIA and IIBA. Apex has a dedicated customer service team for our Consultants that can address questions around benefits and other resources, as well as a certified Career Coach. You can access a full list of our benefits, programs, support teams and resources within our 'Welcome Packet' as well, which an Apex team member can provide. Employee Type: Contract Location: Tualatin, OR, US Job Type: Engineering and Technicians Date Posted: December 8, 2025 Similar Jobs * Controls Engineer 3 * Process Technician 3 * Product Designer 3 * Developer Middleware Integration 3 * HR Support Representative 3

Job DescriptionDescription: An Assembler is responsible for putting together component parts or pieces adhering to a specified set of blueprints or schematics. They verify the correct quantities of components parts and quality checking completed items, manage parts inventory, and use hand tools and mechanical equipment to produce structurally sound products and structures. DUTIES AND RESPONSIBILITIES: Though the day-to-day duties and responsibilities of an Assembler are dependent on the field of manufacturing, it involves interpreting product blueprints and handling various tools. An Assembler should be a people person who can work well with a team and collaborate with people from other departments. Common responsibilities for an Assembler are: • Follow technical instructions, interpret engineering blueprints and technical terms. • Discern quality of parts and materials used in production. • Inventory parts and tools used in the assembling process. • Follow company procedures and directives. • Test finished products for defects. • Maintain the tools used to create products. • Keep a clean and well-maintained workspace. Requirements: • High school diploma or equivalent • Good communication skills • Physical fitness and strength to lift and operate electrical and pneumatic machinery • Excellent hand-eye coordination • Good communication skills • Ability to operate Handheld tools • Ability to Interpret technical documentation • Good communication skills

MISSION: To assemble complex segmented patterns in a dimensionally controlled fixture in preparation for the gating process. PRINCIPAL ACCOUNTABILITY: General To inspect pattern components and dimensional fixture prior to loading. Pre-inspects pattern and dimensional fixture prior to start of assembly. Reads and follows technique card assembly instructions, which describe numerous unique assembly steps of a complex nature; plans the methods for completing a given assignment and selects among alternative assembly methods. Assembly To accurately assemble complex multi-component patterns to maintain dimensional integrity. Assembles complex multi-component patterns by means of torch, hot pencils, and a variety of hand tools. Assembles complex patterns using full-time dimensional fixturing to maintain dimensional control and stability. Manipulates fixture/pattern components to remove configuration discrepancies and verify dimensional integrity Possibly develops code sheets for engineering-requested modifications or deviations to standard assemblies. Inspects assemblies during and after the assembly process to detect defects and ensure quality. ENTRY QUALIFICATIONS: Ability to apply pattern assembly techniques, methods, materials, fixturing and construction. Experience assembling wax patterns and/or pattern finishing is preferred or the equivalent experience Ability to communicate and work effectively with others. Ability to work in a team environment and promote team development. Ability to read and follow complex written instructions. Ability to lift and/or maneuver objects weighing thirty to fifty pounds and occasionally up to one hundred twenty-five pounds with assistance. Ability to work in conditions which may include exposure to noise, fumes, crowding, awkward physical positions, abrasions, cuts, and chemicals. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, color vision, depth perception and ability to adjust focus. While performing the duties of this job, the employee is regularly required to stand; sit and use hands to finger, handle, or feel. The employee is frequently required to reach with hands and arms; talk or hear and taste or smell. The employee is occasionally required to walk and stoop, kneel, crouch, or crawl. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to work near moving mechanical parts, fumes or airborne particles and toxic or caustic chemicals. The noise level in the work environment is usually moderate.

The Production Home Assembler follows work orders and instructions in order to accurately and efficiently prepare and assemble building components and homes in a factory assembly line environment. Essential Duties and responsibilities: Operate various hand tools, power tools and equipment used to complete carpentry duties including: Circular Saw Table Saw Router Pneumatic Nail Gun (roofing, framing and finish work) Drills And other tools needed for measuring, cutting, fastening, and drilling Frame, layout and build floors Prepare, layout and build walls Layout, run and install electrical lines, switches, receptacles and panels/breaker boxes Install and prepare dry for finish tape, mud and texture Complete roof construction, decking, flashing and shingling Cabinet and or finish carpentry and trim, build and installation Installation of siding, windows and doors Painting of interior and exterior of homes Cooperate and promote a team concept with all other company employees Adhere to all rules and regulations, at all times Meet or exceed company safety standards Perform other tasks as assigned by management Minimum Qualifications: Must be at least 18 years of age Must be legally authorized to work in the United States Be able to read, write, and speak English High School diploma, preferred Knowledge, Skills and Abilities: Ability to read a tape measure Possess basic construction knowledge and comfortable using basic tools Excellent attention to detail Ability to read blueprints, a plus Ability to work in a fast-paced environment and multi-task Ability to trouble shoot and problem solve in a high-volume Versatility and willingness to transfer into various departments when necessary You must be able to communicate efficiently and clearly with other Team Members Working conditions: Continuous exposure to heat, cold, noise, and working outdoors. Must wear protective equipment while at the location Physical requirements: Requires walking, sitting, lifting, pushing, pulling and climbing to a significant degree Heavy Work-Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds or force frequently, and/or up to 10 pounds of force constantly to move objects While performing the duties of this job, the employee is regularly required to talk and hear, in order to communicate to employees as well as function safely around construction equipment Disclaimer: “This is intended to provide general information about the position. It is not an employment contract. As with all positions, the responsibilities and duties of this position may change. The company, in its discretion, may alter this job description at any time with or without notice.” EEO/AA Statement: Cavco Industries Inc., and all of its Subsidiaries are an EEO/AA (equal opportunity/affirmative action) institution and does not discriminate on the basis of sex, age, race, color, religion, physical or mental disability, creed, national origin, veteran status, sexual orientation, genetic information, gender identity, or gender expression in the programs or activities which it operates.

Who We Are National Assemblers, Inc is family-owned and the largest retail assembly company in the world, with over 10 Million products assembled for our customers last year. We are the trusted provider to the world's largest brands like Walmart, Amazon, Wayfair, Bass Pro Shop, and most importantly, to individual customers who trust us in their homes. We were awarded “Assembly Company of the Year” for 2022 all due to our hardworking technicians who have pride in all they do! We are also the fastest growing, with over 100 new management roles created and filled last year! If you have the will and the skill, we have the opportunities for you! Who You Are You love working with your hands to build products. You're the one all of your family and friends call to assemble their new treadmill or desk or mount their new TV. You have an entrepreneurial spirit and like the benefits and backing of a W2 organization. You enjoy independence and are self-motivated. You are a great communicator and enjoy interacting with customers. Customer satisfaction and high quality is your top goal when working. You're a problem-solver and proactively seek solutions. You are reliable and have a proven attendance record. You're not afraid of hard work and enjoy a good challenge. If this sounds like you, we would love you to join our NAI team! Key Responsibilities Bed Warranty Repairs - Troubleshoot and fix mechanical or structural issues on various bed types Furniture Assembly - Assemble bed frames, desks, chairs, shelving units, and more Fixture Mounting & Installation - Install wall fixtures such as painting, mirrors, and other home fixtures securely TV Mounting & Installation - Mount, install, and setup TVs, ensuring secure placement and optimal viewing angles Entertainment System Installation & Setup - Install and configure home theater systems, soundbars, and streaming devices Provide top-tier customer service, educating customers on product use and maintenance Maintain accurate records of installations and repairs using company software Follow all safety and quality control procedures to ensure professional results What We're Looking For Experience in installation, assembly, or repair work (preferred but not required) Familiarity with entertainment and security system setup is a plus Mechanical aptitude and ability to use hand/power tools Strong attention to detail and problem-solving skills Excellent customer service and communication abilities Ability to lift and move heavy equipment (50+ lbs) Valid driver's license and clean driving record Benefits: Weekly Pay Medical/Dental/Vision Insurance 401K Paid Certification Program W-2 Employee The Fine Print NAI pays our “in-home” techs competitive earnings per piece being paid for every completed project. Our focus is on efficiency, quality, and safety above all else! Your will and your skill will enable you to determine the pay you desire for yourself. Our dedicated team will give you all the tools and training necessary to unlock your maximum potential. Full and part-time work is available, and jobs and schedules will vary depending on location. You will be a W2 employee (not a subcontractor!), meaning you will be trained, insured, paid appropriately for all hours, including overtime, and eligible for benefits. Start a Career that you Love with National Assemblers, Inc. APPLY NOW to start building your future with us! National Assemblers, Inc is an equal opportunity employer and does not discriminate against otherwise qualified applicants on the basis of race, color, creed, religion, ancestry, age, sex, marital status, national origin, sexual orientation, disability or handicap, veteran status and any state and local protected status.

The Portland factory team at Rejuvenation is responsible for the highest quality craftsmanship in custom lighting and house parts. Overview of the role: Performs a variety of tasks to support the production of Rejuvenation lighting and hardware products. As an Electrical Assembler Technician, you will be assigned to the Assembly area, and work in other functions as needed. Responsibilities Assembles and installs electrical wiring of all lighting fixtures. Safely perform repetitive small assembly operations according to quality specifications to produce a completed light fixture. Perform repetitive hand and bench assembly of varying small sizes using hands, adhesives, fasteners, hand tools, fixtures, and other small machine assists. Tests, calibrates, and fits parts and mechanisms to meet tolerances and product specifications. Duties will include but are not limited to tasks designated as level 1 tasks in the above departments such as: assembling basic light fixtures, sandblasting, hand finishing and other finishing activities required for basic fixtures and finishes, etc. Performs in line quality checks to ensure that established quality standards are being maintained. Collaborates with associates/teams to contribute to the continuous improvement of operational processes, efficient and accurate order completion, and problem resolution. May be assigned to other functional areas based on business need and demand levels. Complies with all safety rules, processes, and standards. Perform other duties as assigned by management. While performing the duties of this job, you will be required to constantly stand, walk, talk and hear. You must be able to occasionally move, push, pull, lift, or carry heavy objects or materials up to 50 pounds. Criteria Prior experience in manufacturing or above functional skills (including lighting assembly and finishing techniques) a plus. Ability to operate hand tools. High school education or equivalent preferred. Ability to read, comprehend, and speak English at a level to effectively utilize and interpret work and safety instructions. Adequate hand dexterity to work with required hand tools - frequent grasping and fine manipulation required. Demonstrates strong listening skills and ability to follow direction. Work Environment Work is performed in a distribution/manufacturing setting. There may be exposure to airborne particles, chemicals, fumes, flammable materials, dirt, grease, and electrical equipment (Personal Protective Equipment provided where required). May work near moving mechanical parts and may be exposed to humid, hot, or cold conditions as well as exposure to moderate noise levels. We believe in People First We firmly believe that working in a culture focused on diversity, equity, and inclusion spurs innovation, creates healthy and high-performing teams, and delivers superior customer experiences. Our DEI initiatives prompt associate participation and engagement, aligning with our core vision to reflect the communities where we do business and put people first. Benefits Just for You Depending on your position and your location, here are a few highlights of what you might be eligible for: A generous discount on all Williams-Sonoma, Inc. brands A 401(k) plan and other investment opportunities Paid vacations and Personal time off Health benefits, dental and vision insurance, including same-sex domestic partner benefits Tax-free commuter benefits A wellness program that supports your physical, financial and emotional health

Purpose of Position: This position is responsible for assembling, wiring, and testing systems and sub-assemblies used in imaging, sensing, and stabilization products. This role works with schematics, work instructions, and engineering drawings to ensure high-quality builds in a high-precision environment. Summary of Essential Job Functions: Assemble electro-mechanical components and sub-assemblies, including motors, sensors, harnesses, and printed circuit boards, for stabilized gimbal systems. Route and secure cabling, harnesses, and connectors per wiring diagrams and standard work procedures. Use precision tools such as torque drivers, calipers, micrometers, and crimpers to meet mechanical tolerances and electrical connection standards. Conduct in-process quality checks and final assembly verification to ensure functionality and alignment. Follow all ESD, FOD, and cleanroom procedures to maintain high-quality standards. Accurately document build steps, deviations, and completed work in ERP or traveler systems (e.g., NetSuite, paper traveler). Collaborate with technicians, engineers, and quality assurance to resolve build issues or process improvements. Other duties as assigned. Education and Experience Qualifications: Experience with documenting and detailing work. Ability to work under magnification and maintain fine motor control. Basic understanding of ESD control and clean manufacturing practices. Physical Demands of Position: Physically able to lift up to 20 pounds (materials/equipment) Effective use of computer, laptop, cell phone and other mobile device to exchange information. Competencies and Skills Requirements: Excellent communication skills, both verbal and written. Excellent team skills and team-oriented. Excellent time management skills and meets deadlines. Flexible; able to multi-task in response to time-sensitive and changing situations. Effective listening skills. Objective, solution-oriented problem-solving skills. Handles highly sensitive and confidential information. Resourceful, able to network and connect people to appropriate resources. Technology savvy, comfortable using MS software products. Strong planning and organizational skills and follow through. Resilient, stays positive and solution-oriented. Perceptive, discovers underlying issues in situations and re-states them in a helpful way. Self-starter with a strong work ethic, able to work without direct supervision. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their typical responsibilities from time to time, as needed.

Russell Tobin's client, an American manufacturing company, is hiring an Assembler in Tualatin, OR Apply Now! Employment Type: Contract Duration: 24+ months with possible extension or conversion Pay range: $22/hr - $25.50/hr Schedules: Front End Days (Sunday- Wednesday 5am-3:30 pm) Back End Days (Wednesday - Saturday 5am-3:30pm) Front End Nights (Sunday - Wednesday 5pm-3:30am) Back End Nights (Wednesday - Saturday 5pm-3:30am) Job Overview: General Position Summary: Navigate computer-based work instructions to install parts and hardware using hand tools and fixtures as required, working on wafer fabrication equipment within a Lean manufacturing clean-room environment. Responsibilities: Use hand tools, torque wrenches, equipment, and fixtures to assemble wafer fabrication equipment. Read and follow detailed work instructions and schematics. Collaborate within teams to maintain workflow and meet production schedules. Adapt to changing priorities, including rework requirements and pilot build projects. Verify correct parts delivery and visually inspect components before installation. Support audits through visual inspection and checklist verification. Close assigned tasks by confirming completion, verifying system steps, and providing a description of work performed. Install parts and hardware per digital instructions, using appropriate tools and fixtures, and confirm system completion. Consistently demonstrate core values aligned with the company culture. Safety Protocol: Complete all required safety training. Follow safe work practices, including proper lifting techniques (up to 35 lbs.), ergonomic use, and stretching. Adhere to personal and product safety guidelines: wear appropriate PPE, follow clean-room procedures, comply with Lockout Tagout policies, and use lifting aids (hoists, cranes, lifting tools). Perform routine safety inspections and document, correct, or escalate hazards. Promote a safe work environment by addressing unsafe practices and escalating unresolved issues. Communication: Demonstrate effective written and verbal communication skills in English. Provide timely information to supervisors and co-workers via phone, email, or in person. Actively engage in meetings and training. Identify and communicate production issues verbally and in writing. Suggest continuous improvements to appropriate teams. Share system status updates during shift transitions. Physical Requirements Note: Physical requirements may vary by site and product line. Ability to work 12-plus hour shifts in a fast-paced setting, including: Lift and install parts up to 35 pounds manually. Perform tasks at a working height of 22” from the ground. Frequently kneel, crouch, and squat. Operate manual tools (wrenches, cutters, etc.). Constantly reach into machinery. Comfortably climb a 10-step ladder. Push/pull assembly dollies with ~40 lbs. of force. Navigate diagnostic software on a computer. Distinguish colors for wire identification. Maintain a clean and organized workspace. Adapt to changing priorities, including overtime and rework. Management may assign or reassign duties as needed. Required Skills and Abilities: Operate hand tools: calipers, circuit testers, wrenches, hoists, ohm meters, screwdrivers, torque wrenches, ladders/platforms, and snipping tools/cutters. Understanding of continuous improvement principles. Strong attention to detail. Flexible and adaptable to change. Proactive and takes initiative. Proficient with computer-based data systems and applications. Able to navigate Microsoft Office software (Excel, Word, Outlook, Teams). Benefits that Russell Tobin offers: Russell Tobin offers eligible employee's comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), a 401(k)-retirement savings, life & disability insurance, an employee assistance program, identity theft protection, legal support, auto and home insurance, pet insurance, and employee discounts with some preferred vendors.

Join Our Team: Food Production Assembler - Urgently Hiring in Silverton! Job Title: Food Production Assembler Pay: $16.25 per hour Hours: Swing Shift: Monday - Friday (with potential weekends during busy seasons for great overtime opportunities!) What You'll Do: As a Food Production Assembler, you will be responsible for: Preparing and pressing dough into pie tins or shells. Filling pies and cobblers with high-quality ingredients. Assisting with mixing, stocking, dumping, and packaging tasks. Scooping flour, sugar, and other powdered ingredients into containers ranging from 1 quart to 50 gallons. Placing dessert products into retail packaging containers and applying labels. Stacking trays to ensure smooth production flow. Maintaining cleanliness and organization in the warehouse at all times. What You'll Bring: The ideal candidate for this role will have: The ability to read, write, and speak in English or Spanish. Strong attention to detail to ensure quality in every product. Previous experience working in a food production or similar environment is preferred. Why Join Us in Silverton? Enjoy flexible hours with potential for overtime during peak seasons. Benefit from a supportive team culture that values your contributions. Take advantage of competitive pay and great benefits once hired permanently, including affordable health and prescription coverage with no waiting period. Contribute to a meaningful cause in the wholesome food industry. Location & Schedule: This position is on-site in Silverton, OR, with shift details from 4:00 PM to 2:00 AM or 5:00 PM to 3:00 AM. Ready to Take the Next Step? If you're ready to start a rewarding career as a Food Production Assembler in Silverton, apply today or contact our recruiting team to learn more. Don't wait, we're hiring now!