Assembler jobs in Waukesha, WI

Do you want a job in which you can grow your skills? Don't miss out on our weekend shift power products assembly position! Join our EK family today for new opportunities. SUMMARY Assembles generator enclosures, tanks and their subassemblies following blueprints and other written and verbal specifications by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned: Reads and understands blueprints and bill of material. Assembles functional parts of enclosures and tanks using hand tools, power tools (cordless drills, impact gun, etc.) levels, plumb bobs, and straight edges. Uses forklifts, aerial lifts, cranes, ladders and other lifting apparatus to aide in the assembly process. Assists in the assembly and installation of electrical and electronic components (electrical enclosures, transformers, etc. all electrical connections are done by qualified personnel), pipe systems and plumbing, machinery and equipment. Assembles both small and large sub-assemblies according to prints or drawings. Reads bill of material to package parts/kits to customer requirements. Studies blueprints, sketches, drawings, manuals, specifications, or sample parts to determine assembly sequence, and setup requirements Follows work instructions from general description. Works with other team members to troubleshoot mechanical/fit issues in a satisfactory manner. Keeps work area clean and organized. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to handle or feel; and reach with hands and arms. The employee frequently is required to stoop, kneel, crouch, or crawl. The employee is occasionally required to climb or balance and talk or hear. The employee must frequently lift and/or move up to 25 pounds and may occasionally lift and/or move up to 80 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and fumes or airborne particles.

Assembler Shift: 2nd, (2:30pm-11pm) Pay: $16-$18/hr (Based on experience) We are seeking a detail-oriented Assembler to join our 2nd-shift production team. Under the direction of the Production Supervisor and Line Leads, the Assembler is responsible for building, assembling, and testing products according to all specifications, instructions, and quality standards. Job Description: Read and follow blueprints, travelers, work instructions, and specifications. Accurately assemble, build, and test components and finished parts. Examine parts and assemblies for proper fit and quality. Interpret measurements and verify accuracy throughout the assembly process. Complete production and quality documentation, including electronic forms. Maintain a clean, organized, and safe work environment. Perform basic preventative maintenance on equipment as directed. Report errors or issues within the production line. Follow all safety rules, procedures, and regulatory/quality requirements.

Job Description About the Company Maysteel designs, engineers, and manufactures custom sheet metal enclosures, cabinets, kiosks, and racks for mission-critical industries. The company is a major supplier to data centers with custom server racks, aisle containment systems, and related structures that support AI and high-density computing. With six North American facilities and decades of fabrication expertise, Maysteel partners with customers across data center, critical power, utilities, telecom, and other sectors to deliver scalable, compliant solutions. Role Summary Assemblers build and finish components that become custom server racks, poly panels, and related data center products. You will read job instructions and visual aids, assemble parts to spec, and use basic hand and power tools to support high-mix, high-quality production. This is an on-floor role on first or second shift in a union environment. Standard hours 1st shift: 7:00 a.m. - 3:30 p.m. 2nd shift: 3:30 p.m. - 12:00 a.m. for second shift. Current overtime patterns can include 10-hour days starting at 5:00 a.m. and A/B Saturdays every other week from 5:00 a.m. - 11:00 a.m. per staffing needs. Key Performance Objectives First 30 Days Learn safety practices, PPE, and workstation housekeeping standards. Demonstrate reliable attendance and on-time starts aligned to shift requirements. Complete onboarding for Epicor job clocking and basic data recording. Assemble parts on one station to takt and quality targets using visual aids. First 60 Days Rotate through a second station in Assembly SL Paint and meet daily output and first-pass yield goals. Show proficiency with gauges and basic inspection steps to ensure conformance to specifications. Maintain clean, organized work areas while minimizing material waste. First 90 Days Cross-train on a third operation or offline assembly process and sustain rate and quality without close supervision. Accurately mark, package, and move completed assemblies per routing and identification standards. Meet or exceed daily attendance and schedule commitments, including overtime or AB Saturdays when required. First 12 Months (365 Days) Be a go-to assembler across multiple stations with consistent quality, safety, and throughput. Support training of new hires on one operation and share best practices that reduce rework and scrap. Contribute to on-time delivery for data center racks and containment builds that power AI and high-density computing. Key Responsibilities Safety and Workplace Readiness Follow PPE and safe lifting practices and maintain a clean, hazard-free area. Start up and shut down basic equipment properly and report defects immediately. Assemble components using manual and pneumatic tools to approved specifications and visual aids. Use gauges, visual checks, and basic inspection to ensure conformance and mark parts for identification. Load, unload, and move parts via carts, dollies, and conveyors; package finished goods. Log in and out of jobs in Epicor and record simple production data accurately. Cross-train on additional stations within Assembly SL Paint; assist peers and new hires as requested. Recommend simple tooling or process improvements to reduce waste. Must-Have Qualifications High school diploma or GED. Willingness to learn and follow manufacturing instructions, blueprints, and visual aids. Basic math, communication skills, and reliable attendance. Comfort using hand and power tools and working on your feet through a full shift. Ability to lift, carry, push, pull, and grasp up to 35 lbs. and perform frequent bending, twisting, and reaching. Nice-to-Haves Experience in metal fabrication or assembly environments. Familiarity with Epicor or similar manufacturing systems. Spot weld exposure or interest in cross-training. Cultural Non-Negotiables Shows up on time, communicates early about issues, and follows through on commitments. Raises quality or equipment concerns quickly with solutions in mind to protect throughput and team safety. Protects relationships on the floor while driving personal accountability and helping teammates. Why Maysteel Mission-critical work that powers modern data centers, including AI-driven infrastructure, with products you can see at scale. Stable platform with diverse industries and an in-house engineering and fabrication footprint. Opportunities for development and advancement.

We are Generac, a leading energy technology company committed to powering a smarter world. Over the 60 plus years of Generac's history, we've been dedicated to energy innovation. From creating the home standby generator market category, to our current evolution into an energy technology solutions company, we continue to push new boundaries. Hours: 3:30pm-12:00am Monday-Friday Pay Rate: $22.04-$22.32 per hour Assembler I/II/III is responsible for performing assembly work to manufacture products in a cost effective and timely manner while fulfilling quality standards. The Assembler I/II/III will validate material prior to beginning assembly, review work instructions, build product per specifications and within tolerances, complete all clean-up and housekeeping procedures, comply with all quality, safety and work rules and regulations including wearing all appropriate PPE. Responsibilities: Uses work instructions drawings, schematics, electronic assembly equipment to perform assembly while complying with safe and effective operation standards of all equipment and tools. Cross trains in multiple assembly areas and flex to other similar departments based on business needs. Develop and maintain an understanding of the products they assemble and how they impact the business. Continuous learning of the principles, practices, and processes of their job as changes require and similar jobs. Participate in team meetings to exchange job related information. Resolve problems with assistance from peers or supervisors depending on the level and complexity. Provide basic training to employees on work instructions/standard work as needed. Requirements: High school Diploma or equivalent (GED). Physical Demands: While performing the duties of this job, the employee is regularly required to talk and hear; and use hands to manipulate objects or controls. The employee is regularly required to stand and walk. On occasion the incumbent may be required to stoop, bend or reach above the shoulders. The employee must occasionally lift up to 25 - 50 pounds. Specific conditions of this job are typical of frequent and continuous computer-based work requiring periods of sitting, close vision and ability to adjust focus. Occasional travel. “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability status, protected veteran status, or any other characteristic protected by law.”

Job Description BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION Under the direction of the Department Production Supervisor and in cooperation with the Team Leader, safely perform a variety of tasks to correctly assemble, fit, and join components in the production process of heavy and large mechanical products, per specifications and in accordance with the production schedule, making independent decisions with minimal direct supervision given appropriate instructions. Key Deliverables · Perform accurate material transactions for the production line. · Support the production process by performing essential checks and taking corrective actions if needed. · Use tools properly to make or repair parts and products. · Collaborate with other line workers in order to assemble products. · Comply with all company and industry safety requirements. · Accurately documents, such as diagrams, schematics, blueprints, or other verbal or written instructions. Key Activities & Responsibilities · Cleans and assembles component parts, machined parts, and subassemblies · Uses various hand tools, pneumatic tools, hydraulic tools, and precision measuring instruments to complete tasks · Removes burrs and rough spots from parts with hand file, hone stone, or portable pneumatic grinder · Operates overhead cranes and forklifts to move parts and materials in and out of work area and to assemble large components · Performs minor adjustments, repairs, or setups to equipment or machines under supervision · Perform all required job functions in a safe manner consistent with plant safety standards and report any problems immediately to the team leader or Department Supervisor. · Other duties as assigned: may include basic welding, washing, primer and painting of components or assemblies. · Performs correct material transactions on shop routings. · Performs the essential checks and adjustments using appropriate processes, uses gauges or other measuring instruments when needed for proper assembly To be successful in this role, your experience and competencies are: · High School Diploma or General Education Degree (GED) preferred. · Knowledge of commonly used mechanical concepts, practices, and procedures required. · Relevant trade school or college course work desired. · Ability to correctly use and read a tape measure, and read/understand job-related blueprints, required. · 2-4 years of Heavy equipment manufacturing experience desired. · Ability to read drawings and blueprints accurately. · Able to operate overhead cranes and forklifts. · Computer experience desired, particularly the ability to use a mouse, and locate and open/close files. · Must be dependable, dedicated to completing work assignments correctly, and use time wisely. · Adept at problem-solving. Adaptable to new situations and challenges. Open to changes and new ideas. · Ability to satisfactorily work alone with reasonable and appropriate instructions, training, and supervision, and ability to work with others respectfully and professionally in a team environment. · Ability to communicate clearly and completely, expressing needs, and asking questions. · Ability to sufficiently carry out detailed and written and/or oral instructions. · Ability to handle the demand that accompanies production standards and deadlines. · Ability to accept constructive criticism and make subsequent adjustments, and willingness to rework incorrect tasks completed by oneself or others. Supervisor and Leadership Expectations None Our Culture and Values Employees that become part of Astec embody the values below throughout their work. · Continuous devotion to meeting the needs of our customers · Honesty and integrity in all aspects of business · Respect for all individuals · Preserving entrepreneurial spirit and innovation · Safety, quality and productivity as means to ensure success WORK ENVIRONMENT Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person's veteran status or any other characteristic protected by law or executive order.

Job DescriptionDescription: For over a century, American Packaging Corporation (APC) has been a leading flexible packaging converter for customers throughout North America. We nurture our employees by providing competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs. These are just a few reasons why we were named a “Best of the Best” in the Best Workplaces in the Americas awards for 12 years in a row. APC's longstanding success is fueled from the inside out, and we consistently seek to improve our internal operations to propel that success into the future. Prepress Washroom/Assembler LOCATION: Columbus, WI SHIFT: 3rd (11pm-7am) SUMMARY: To prepare and stage press or laminator jobs. Prepress personnel are used in any capacity needed to stage items at any machine. They may retrieve and prepare cylinders for press run and after the press run, clean the cylinders and store them. All these functions must be performed in the safest, most effective and efficient manner while adhering to established SOP's and quality standards. . ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Actively participate and embrace in the SPOT Safety Program fundamentals and adhere to all safety guidelines and rules to aid APC's efforts to achieve a zero-accident rate. Participate as a Subject Matter Expert in developing, understanding, and following Standard Operating Procedures and or training documentation. Print and understand each job's Job Jacket, Print Specification, and Manufacturing Specification and take to the press. Retrieve daily production schedule that identifies which job will run, quantities, priorities, etc. Interpret and act upon information. Detect, report, and resolve all missing or substandard machine parts. Use an automated storage system terminal to retrieve and return cylinders and anilox to storage. Assemble and transport print cylinders and aniloxes between printing press and prepress departments. Place cylinders on assembly table and install the gears and journals. Install the pans, applicator pipes, end shields, splash guards and cylinders into the carriage units. Return the units to prepress, remove the parts, clean up the cylinders, and store them back into the storage system after a job has run. Aid on press set-ups as needed. Assist miscellaneous housekeeping and cleaning responsibilities. Complete required reports and paperwork. Use a computer terminal. Perform required cleaning tasks - some daily, weekly or monthly requirements. Obtain Power Industrial Truck license(s). Complete PSM training and be able to perform all work in the washroom. Effectively communicate with coworkers throughout all shifts. Attend and participate in all company mandated meetings. Business travel may be required. Any other duties as assigned. Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE : High school diploma or general education degree (GED); and one to three months related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear. The employee frequently is required to reach with hands and arm. The employee is occasionally required to walk. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, fumes or airborne particles, and toxic or caustic chemicals. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position please contact our Human Resources department at ********************.

Job Description Assembly SEEK is recruiting for dedicated and skilled Assembly Workers for our client in Beaver Dam! In this role, you'll be responsible for the precise and efficient assembly of parts and subassemblies for our Original Equipment Manufacturer (OEM) and SCAG products, contributing directly to the production of high-quality equipment. Position -Assembly Job Location - Beaver Dam, WI. Starting Date -ASAP Employment Term -Temp to hire Employment Type -Full time Work Hours (Shift) -1st shift with OT on Saturday Starting Pay -$17 to $20 BOE Benefits -Medical, vision, dental Required Education -High School Diploma/GED Required Experience -Prior manufacturing experience helpful Responsibilities Prepares work to be accomplished by studying assembly instructions, blueprint specifications, and parts lists; gathering parts, subassemblies, tools, and materials. Positions parts and subassemblies by using templates or reading measurements. Assembles components by examining connections for correct fit; fastening parts and subassemblies. Verifies specifications by measuring completed component. Resolves assembly problems by altering dimensions to meet specifications; notifying supervisor to obtain additional resources. Keeps equipment operational by completing preventive maintenance requirements; following Qualifications Previous experience working within a highly technical environment. Strong basic math skills. Previous experience with light electrical assembly and/or heavy equipment assembly. Previous forklift experience. Exposure to a Lean manufacturing environment. Basic knowledge in blue prints reading and torque values. Must have excellent written and verbal communication skills. Ability to efficiently work in a team and coordinate work with other departments. Aptitude to take orders and execute the same efficiently. High school degree, diploma or a GED equivalent qualification from is accredited institution. Please send your resume to Fonddulac@SEEKcareers.com Call or Text at 920.924.7886 or APPLY ONLINE at SEEKCAREERS.COM Keywords: assembly, metal fabrication, production About SEEK Careers/Staffing You are a person with unique skills, experience and education. When you want to be heard and when you want to be matched with great career opportunities that are right for you, you can count on SEEK Careers/Staffing, Inc. Since 1971, our professional staffing consultants have been Servicing Your Success . You'll find that the process is thorough and that your experience is personalized. SEEK Careers/Staffing is an equal opportunity employer and does not discriminate against otherwise qualified applicants on the basis of race, color, creed, religion, ancestry, age, sex, marital status, national origin, disability or handicap, genetic, military status or any other basis prohibited by federal, state, or local law.

Job Description Kelco Industries is a market leader in cost-effective, high performance, custom engineered components for a wide variety of industries. We invest in the latest technologies and top talent, and because we are privately held, we answer only to our customers - so we can make fast decisions that move our business and our customers forward. Kelco is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We further are committed to considering all qualified individuals with disabilities and will provide reasonable accommodation as needed throughout the hiring process. Kelco offers a competitive benefits package, including Health, Dental, Vision, Disability, and Life insurance. Job Summary Assembles protection, communication, and control devices, such as switches, relays, solenoids, and control systems, as laid out in drawings and wiring diagrams by performing the following duties. Essential Functions Uses fixtures, machines, presses, and tools to assemble parts according to prints and router including, electronic components, gears, wound coils, terminals, and switches. Routing wires, cutting, and soldering wires to connect electrical units using hand tools and various soldering techniques. Inspect and test wire assemblies using, ohmmeter, or resistance tester to test connections for resistance, shorts, and grounds. Adjusts contacts, stakes units, adjusts springs, and shafts to meet specifications. Maintain production report, while tracking and identifying component status. Detail painting and/or engraving of parts as needed. Performs other related duties and special projects as required and assigned by the Department Manager. Qualifications To perform this job successfully, an individual must be able to perform each essential duty at a high level of proficiency and within our core value system. Assertiveness - Ability to act in a self-confident manner to facilitate completion of a work assignment or to defend a position or idea. Motivation - Ability to inspire oneself and others to reach a goal and/or perform to the best of their ability. Safety Awareness - Ability to identify and correct conditions that affect employee's safety. Accountability - Ability to accept responsibility and account for his/her actions. Communication/Oral - Ability to communicate effectively with others using the spoken word. Analytical Skills - Ability to use thinking and reasoning to solve problems. Problem Solving - Ability to find a solution for or to deal proactively with work-related problems. Technical Aptitude - Ability to comprehend complex technical topics and specialized information. Dependable - Must consistently demonstrate dependability, a great work ethic, initiative, ownership of issues, problem-solving abilities, and an exceptional attitude. Flexibility - Demonstrate the ability to be flexible, accept new ideas and input positively, and be open to new work approaches and processes. This position requires a person who is highly attentive to detail and has good hand-eye coordination. A High School Diploma or equivalent. 1-2 years of work experience within a manufacturing. Powered by JazzHR pjs Mhit6MI

Are you ready to join our dynamic manufacturing team? We're on the lookout for a talented Assembler who's not afraid to get hands-on. Your mission: to assemble products with finesse, using your strength and nimble fingers for precision work. Attention to detail is your superpower as you ensure every component fits snugly and securely. This full-time, non-exempt role isn't just a job-it's a pathway to leadership for those who excel. If this sounds like the job for you, please review the full job description below and apply! Step up and build your future with us! Responsibilities: Perform intricate assembly of products by following detailed instructions, interpret engineering blueprints and technical terms. Use significant hand strength and fine motor skills to manipulate, fit and secure components during the assembly process Discern quality of parts and materials used in production. Inventory parts and tools used in the assembling process. Follow company procedures and directives. Maintain accurate records of work performed, including assembly logs and quality checks. Test finished products for defects. Operate hand tools, power tools, and machinery safely and effectively during the assembly process. Keep a clean and well-maintained workspace. Adhere to all safety guidelines and protocols to ensure a safe working environment. Handle/lift heavy cords (up to 50lbs) Other duties as assigned Skills and Experience Required Previous experience in assembly, manufacturing, or related field. Strong hand strength and dexterity are essential. Ability to identify depth, dimension and color by sight. Ability to lift/carry/manipulate up to 50lbs. Attention to detail and ability to follow precise instructions for intricate assembly tasks. Accepting this position requires candidates to complete and pass a background check.

As a leading aerial equipment manufacturer, we're constantly striving to better our products, services, and customer satisfaction. We understand this starts with us and that's why we're dedicated to our employees' success. If you're an energetic and motivated individual, we want to talk with you! Start the conversation and learn more about our rapidly growing team when you apply today. Job Description Primary Purpose Assembler II position performs manual labor along all stations on the production line, meets labor rates and quality control with minimal supervision. Essential Function and Responsibilities Produces components by assembling parts and subassemblies Operate production line equipment and hand/power tools efficiently at all workstations to assemble components. Meets standard labor rates while maintaining quality standards. Completes tasks directed by Supervisor with minimal supervision. Communicate & flex with co-workers to meet production goals. Complete daily labor sheets and required production documentation. Maintains work area and equipment in a clean and orderly condition and follows safety regulations daily. Follows technical and verbal assembly instructions. May perform other duties as required and/or assigned. Qualifications The requirements listed below are representative of the knowledge, skills, physical demands and/or ability required for this position to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: High School Diploma or equivalent Basic reading, writing, and arithmetic skills Able to build to print at quality level Manual dexterity required for using various tools and operating machinery Mechanical and electrical skills (2-3 years) Ability to read bill of materials and product work instructions Physical Demands and Working Environment: Ability to lift up to 50 pounds Exposure to moving mechanical parts Additional Information All your information will be kept confidential according to EEO guidelines.

Assemble electronic or mechanical products from blueprints using assembly fixtures and power bench tools. Cut & crimp wires, form, connect and perform simple soldering in accordance with instructions. Fit and align fine electronic assemblies, recognize defective parts, inspect and test final assemblies on a variety of assembly operations Responsibilities Experience with Kanban Inventory process Count and record parts from inventory with accuracy using basic math skills Communicate shortages, scrap and delays when applicable Read caliper, tape measure and interpret work instructions Identify the correct colored wire(s) per work instructions Operate small hand and power tools Perform cuts, crimps, connections and soldering Use computer software to locate and print assembly drawings Identify and obtain accurate assembly fixtures as called by Work Order Assemble products to Work Order specifications Perform assembly tasks to meet daily production standards of quality and quantity Package product for shipment Qualifications Education and Experience: High school or general education (GED) preferred Computer experience with Microsoft Office (Excel and Word) required 2 years mechanical or electrical assembly preferred Skills and Abilities: Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Complete standardized written documentation and correspondence. Professionally communicate in one-on-one and small group situations. Ability to perform basic electronic tasks using computer software and Microsoft Office. Working Conditions/Physical Demands: Environment is a modern production facility with heat and air conditioning Ability to use fine motor skills (hand and fingers) to routinely manipulate assemblies, hand and power tools, wires, fixtures, and parts The job requires the operation of material handling equipment While performing the duties of this job, the employee is generally required to stand; bend, kneel, twist, reach overhead routinely to retrieve inventory or pack shipments Required to maneuver routinely Ability to lift up to 30 pounds routinely Ability to lift 31 pounds to 50 pounds occasionally Ability to lift over 50 pounds with assistance occasionally Ability to lift up to 25 pounds over shoulders occasionally Ability to lift over 25 pounds over shoulders rarely Ability to push/pull up to 25 pounds regularly Ability to push/pull up to 50 pounds occasionally Required to climb a ladder regularly Required to safely ride product up to 14 feet in the air while performing product testing

Who We Are National Assemblers, Inc is family-owned and the largest retail assembly company in the world, with over 10 Million products assembled for our customers in 2023. We are the trusted provider to the world's largest brands like Walmart, Wayfair, Bass Pro Shop, and most importantly, to individual customers who trust us in their homes. We were awarded “Assembly Company of the Year” for 2022 all due to our hardworking technicians who have pride in all they do! We are also the fastest growing, with over 100 new management roles created and filled last year! If you have the will and the skill, we have the opportunities for you! Who You Are You love working with your hands to build products. You're the one all of your family and friends call to assemble their new treadmill or desk or mount their new TV. You have an entrepreneurial spirit and like the benefits and backing of a W2 organization. You enjoy independence and are self-motivated. You are a great communicator and enjoy interacting with customers. Customer satisfaction and high quality is your top goal when working. You're a problem-solver and proactively seek solutions. You are reliable and have a proven attendance record. You're not afraid of hard work and enjoy a good challenge. If this sounds like you, we would love you to join our NAI team! What You'll Do You'll receive customer orders to complete installation or assembly jobs in customer's homes You'll communicate with the customer to confirm all appointments You'll assemble the product to National Assembler's specifications You'll build a strong rapport with customers and ensure 100% satisfaction by delivering good customer service and quality product What's In it For You Piece Rate Complesation: $20/hr - $30/hr pay with the opportunity to earn more! (Full time/Part time available, hours will vary by location) Overtime Pay Mileage Reimbursement Weekly Pay Medical/Dental/Vision Insurance (Benefits begin after 60 days of employment) 401K W2 Employee Paid Certification Program (Get paid to learn a trade!) Travel opportunities A nationwide support staff who is focused on your personal development and success Rapid opportunities for advancement and career growth You'll Meet These Basic Job Requirements You must be able to lift 40 pounds You must have your own RELIABLE transportation You must have a valid Driver's License and auto insurance This job requires regular driving to customers' homes and businesses. (most jobs are within 15 to 75 miles of your home) The Fine PrintNAI pays our “in-home” techs a competitive base compensation, with additional earnings being paid for every completed project. Our focus is on efficiency, quality, and safety above all else! Your will and your skill will enable you to determine the pay you desire for yourself. Our dedicated team will give you all the tools and training necessary to unlock your maximum potential. Full and part-time work is available, and jobs and schedules will vary depending on location. You will be a W2 employee (not a subcontractor!), meaning you will be trained, insured, paid appropriately for all hours, including overtime, and eligible for benefits. Start a Career that you Love with National Assemblers, Inc. APPLY NOW to start building your future with us! National Assemblers, Inc is an equal opportunity employer and does not discriminate against otherwise qualified applicants on the basis of race, color, creed, religion, ancestry, age, sex, marital status, national origin, sexual orientation, disability or handicap, veteran status and any state and local protected status.

PIVOT POINT INC. a manufacturer of non-threaded fasteners located in Hustisford, WI is seeking qualified candidates to fill a few Light Assembly position(s). Full time--Weekend Shift 1st Shift Weekend shift is Fri-Sun, 4am-4pm (work 36, get paid for 40!), plus overtime as needed. Training would be Monday--Thurs on 1st shift for several weeks. Qualified individual must be able to assemble lanyards and fastener parts according to blue print and shop order for dimensions and tolerances. Requires strong hand-eye coordination and hand dexterity with small parts. Manually and mechanically assemble lanyards, rings, or other metal parts. Operates machines and performs duties in a safe manner. Maintains expected rates for production. Read simple blue prints and QC sheets for product specifications such as dimensions and tolerances. Participates and works well as a team member and able to work independently and make knowledgeable decisions. Engages in excellent housekeeping and safety practices. Ability to sit for long periods of time. Ability to frequently lift/move 10 pounds, occasionally lift/move up to 50 pounds. Must be 18 years of age or older. Must be able to pass pre-hire and random drug screens. Ideal candidates will have solid, long-term, consistent work history. Benefits package includes health, dental, life, tuition reimbursement, and 401K. Pay starting at $18-19 per hour. * Must be able to pass pre-employment and random drug testing.*

Assembles generator enclosures, tanks and their subassemblies following blueprints and other written and verbal specifications by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned: * Reads and understands blueprints and bill of material. * Assembles functional parts of enclosures and tanks using hand tools, power tools (cordless drills, impact gun, etc.) levels, plumb bobs, and straight edges. * Uses forklifts, aerial lifts, cranes, ladders and other lifting apparatus to aide in the assembly process. * Assists in the assembly and installation of electrical and electronic components (electrical enclosures, transformers, etc. all electrical connections are done by qualified personnel), pipe systems and plumbing, machinery and equipment. * Assembles both small and large sub-assemblies according to prints or drawings. * Reads bill of material to package parts/kits to customer requirements. * Studies blueprints, sketches, drawings, manuals, specifications, or sample parts to determine assembly sequence, and setup requirements * Follows work instructions from general description. Works with other team members to troubleshoot mechanical/fit issues in a satisfactory manner. * Keeps work area clean and organized. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to handle or feel; and reach with hands and arms. The employee frequently is required to stoop, kneel, crouch, or crawl. The employee is occasionally required to climb or balance and talk or hear. The employee must frequently lift and/or move up to 25 pounds and may occasionally lift and/or move up to 80 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and fumes or airborne particles.

We are Generac, a leading energy technology company committed to powering a smarter world. Over the 60 plus years of Generac's history, we've been dedicated to energy innovation. From creating the home standby generator market category, to our current evolution into an energy technology solutions company, we continue to push new boundaries. 2nd shift: Monday - Friday 3:00 PM - 11:30 PM Pay Rate: $22.00 per hour (Assembler I) Pay Rate: $23.00 per hour (Assembler II) JOB SUMMARY: ASSEMBLER I: The Assembler I is responsible for performing basic assembly work to manufacture products in a cost effective and timely manner while fulfilling quality standards. The Assembler I will validate material prior to beginning assembly, review work instructions, build product per specifications and within tolerances, complete all clean-up and housekeeping procedures, comply with all quality, safety and work rules and regulations including wearing all appropriate PPE. ASSEMBLER II The Assembler II is responsible for performing complex assembly work to manufacture products in a cost effective and timely manner while fulfilling quality standards. The Assembler II will validate material prior to beginning assembly, review work instructions, build product per specifications and within tolerances, complete all clean-up and housekeeping procedures, comply with all quality, safety and work rules and regulations including wearing all appropriate PPE. The Assembler II will also train other employees. ASSEMBLER III: The Assembler III is responsible for performing complex assembly work to manufacture products in a cost effective and timely manner while fulfilling quality standards. The Assembler III will validate material prior to beginning assembly, review work instructions, build product per specifications and within tolerances, complete all clean-up and housekeeping procedures, comply with all quality, safety and work rules and regulations including wearing all appropriate PPE. Additionally, the Assembler III will frequently train other employees and participate in continuous improvement programs along with problem solving production related concerns. MINIMUM QUALIFICATIONS: ASSEMBLY I: • Ability to perform highly repetitive assembly tasks in a manufacturing environment. ASSEMBLY II: • High school diploma or equivalent and/or 1 year of complex assembly or related experience • Internal: Demonstrated Assembler II competency ASSEMBLY III: • High school diploma or equivalent • 2 years of complex assembly or related experience • Internal: Demonstrated Assembler III competency & High school diploma or equivalent PREFERRED QUALIFICATIONS: ASSEMBLY I: • High school diploma or equivalent • Manufacturing experience, including knowledge of manufacturing processes or related experience ASSEMBLY II: • Experience using SAP or equivalent ERP system ASSEMBLY III • Experience in root cause problem solving (5 Why, 8D, PDCA, etc.) • Experience effectively training other employees to work instructions/standard work. • Previous experience using SAP or equivalent ERP system (Oracle, JD Edwards, Microsoft Dynamics) ESSENTIAL DUTIES 70% Uses work instructions drawings, schematics, electronic assembly equipment to perform assembly while complying with safe and effective operation standards of all equipment and tools. ASSEMBLY II Resolves problems with assistance from peers or supervisor depending on the level and complexity. ASSEMBLY III Uses initiative and judgment to lead problem solving and implementing appropriate countermeasures. 20% Cross trains in multiple assembly areas and flex to other similar departments based on business necessity. Provide training frequently to new employees and current employees learning new work areas on work instructions/standard work. 10% Develop and maintain an understanding of the products they assemble and how it impacts the business. Continuous learning of the principles, practices, and processes of their job as changes require and similar jobs. ASSSEMBLY II/III Suggest and implement improvements of existing equipment, designs, and/or processes to improve safety, quality, delivery and productivity. OTHER DUTIES AS ASSIGNED, INCLUDING: • Follow established procedures, processes, or policies. • Demonstrates good attendance, quality, attention to detail and all safety policies. • Participate in team meetings to exchange job related information. ASSEMBLY I: • Resolve problems with assistance from peers or supervisors depending on the level and complexity. ASSEMBLY II: • Ability to access information needed within ERP system. • Contributes to improving processes, lead times, through-put and cost. ASSEMBLY III: • Proficiently access information and perform transactions as needed within ERP system. • Leading in team meets and exchange job related information • Solve problems independently within designated authority level KNOWLEDGE, SKILLS AND ABILITIES: ASSEMBLY I • Detail oriented and organized. • Ability to effectively communicate in a team environment. • Accepts responsibility for own actions, follows through on commitments. • Ability to understand and execute basic standard assembly procedures, interpret basic visual diagrams, and use basic hand tools. • Ability to perform basic reading, writing, and math functions. ASSEMBLY II • Contributes to identifying problems and implementing appropriate countermeasures. • Ability to understand and execute basic standard procedures, interpret basic visual diagrams, and use advanced tooling. • Ability to perform more complex assembly skills. • Intermediate computer knowledge (such as using electronic work instructions) • Understands principles of basic machine operations. ASSEMBLY III • Consistently follows through on team commitments, communicates, and demonstrates accountability. • Ability to understand and execute advanced standard procedures, interpret basic visual diagrams, and use advanced tooling. • Ability to problem solve with minimal guidance. LEVEL OF INDEPENDENCE: ASSEMBLY I/II/III Reports to Production Supervisor Physical Demands: While performing the duties of this job, the employee is regularly required to talk and hear; and use hands to manipulate objects or controls. The employee is regularly required to stand and walk. On occasion the incumbent may be required to stoop, bend or reach above the shoulders. The employee must occasionally lift up to 25 - 50 pounds. Specific conditions of this job are typical of frequent and continuous computer-based work requiring periods of sitting, close vision and ability to adjust focus. Occasional travel. “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability status, protected veteran status, or any other characteristic protected by law.”

Job Description BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION Under the direction of the Department Production Supervisor and in cooperation with the Team Leader, safely perform a variety of tasks to correctly assemble, fit, and join components in the production process of heavy and large mechanical products, per specifications and in accordance with the production schedule, making independent decisions with minimal direct supervision given appropriate instructions. Key Deliverables · Perform accurate material transactions for the production line. · Support the production process by performing essential checks and taking corrective actions if needed. · Use tools properly to make or repair parts and products. · Collaborate with other line workers in order to assemble products. · Comply with all company and industry safety requirements. · Accurately documents, such as diagrams, schematics, blueprints, or other verbal or written instructions. Key Activities & Responsibilities · Cleans and assembles component parts, machined parts, and subassemblies · Uses various hand tools, pneumatic tools, hydraulic tools, and precision measuring instruments to complete tasks · Removes burrs and rough spots from parts with hand file, hone stone, or portable pneumatic grinder · Operates overhead cranes and forklifts to move parts and materials in and out of work area and to assemble large components · Performs minor adjustments, repairs, or setups to equipment or machines under supervision · Perform all required job functions in a safe manner consistent with plant safety standards and report any problems immediately to the team leader or Department Supervisor. · Other duties as assigned: may include basic welding, washing, primer and painting of components or assemblies. · Performs correct material transactions on shop routings. · Performs the essential checks and adjustments using appropriate processes, uses gauges or other measuring instruments when needed for proper assembly To be successful in this role, your experience and competencies are: · High School Diploma or General Education Degree (GED) preferred. · Knowledge of commonly used mechanical concepts, practices, and procedures required. · Relevant trade school or college course work desired. · Ability to correctly use and read a tape measure, and read/understand job-related blueprints, required. · 2-4 years of Heavy equipment manufacturing experience desired. · Ability to read drawings and blueprints accurately. · Able to operate overhead cranes and forklifts. · Computer experience desired, particularly the ability to use a mouse, and locate and open/close files. · Must be dependable, dedicated to completing work assignments correctly, and use time wisely. · Adept at problem-solving. Adaptable to new situations and challenges. Open to changes and new ideas. · Ability to satisfactorily work alone with reasonable and appropriate instructions, training, and supervision, and ability to work with others respectfully and professionally in a team environment. · Ability to communicate clearly and completely, expressing needs, and asking questions. · Ability to sufficiently carry out detailed and written and/or oral instructions. · Ability to handle the demand that accompanies production standards and deadlines. · Ability to accept constructive criticism and make subsequent adjustments, and willingness to rework incorrect tasks completed by oneself or others. Supervisor and Leadership Expectations None Our Culture and Values Employees that become part of Astec embody the values below throughout their work. · Continuous devotion to meeting the needs of our customers · Honesty and integrity in all aspects of business · Respect for all individuals · Preserving entrepreneurial spirit and innovation · Safety, quality and productivity as means to ensure success WORK ENVIRONMENT Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person's veteran status or any other characteristic protected by law or executive order.

Job DescriptionDescription: For over a century, American Packaging Corporation (APC) has been a leading flexible packaging converter for customers throughout North America. We nurture our employees by providing competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs. These are just a few reasons why we were named a “Best of the Best” in the Best Workplaces in the Americas awards for 12 years in a row. APC's longstanding success is fueled from the inside out, and we consistently seek to improve our internal operations to propel that success into the future. Prepress Washroom/Assembler SHIFT: 2nd (3pm-11pm) LOCATION: Columbus, WI SUMMARY: To prepare and stage press or laminator jobs. Prepress personnel are used in any capacity needed to stage items at any machine. They may retrieve and prepare cylinders for press run and after the press run, clean the cylinders and store them. All these functions must be performed in the safest, most effective and efficient manner while adhering to established SOP's and quality standards. . ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Actively participate and embrace in the SPOT Safety Program fundamentals and adhere to all safety guidelines and rules to aid APC's efforts to achieve a zero-accident rate. Participate as a Subject Matter Expert in developing, understanding, and following Standard Operating Procedures and or training documentation. Print and understand each job's Job Jacket, Print Specification, and Manufacturing Specification and take to the press. Retrieve daily production schedule that identifies which job will run, quantities, priorities, etc. Interpret and act upon information. Detect, report, and resolve all missing or substandard machine parts. Use an automated storage system terminal to retrieve and return cylinders and anilox to storage. Assemble and transport print cylinders and aniloxes between printing press and prepress departments. Place cylinders on assembly table and install the gears and journals. Install the pans, applicator pipes, end shields, splash guards and cylinders into the carriage units. Return the units to prepress, remove the parts, clean up the cylinders, and store them back into the storage system after a job has run. Aid on press set-ups as needed. Assist miscellaneous housekeeping and cleaning responsibilities. Complete required reports and paperwork. Use a computer terminal. Perform required cleaning tasks - some daily, weekly or monthly requirements. Obtain Power Industrial Truck license(s). Complete PSM training and be able to perform all work in the washroom. Effectively communicate with coworkers throughout all shifts. Attend and participate in all company mandated meetings. Business travel may be required. Any other duties as assigned. Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE : High school diploma or general education degree (GED); and one to three months related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear. The employee frequently is required to reach with hands and arm. The employee is occasionally required to walk. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, fumes or airborne particles, and toxic or caustic chemicals. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position please contact our Human Resources department at ********************.

As a leading aerial equipment manufacturer, we're constantly striving to better our products, services, and customer satisfaction. We understand this starts with us and that's why we're dedicated to our employees' success. If you're an energetic and motivated individual, we want to talk with you! Start the conversation and learn more about our rapidly growing team when you apply today. Job Description Primary Purpose Assembler II position performs manual labor along all stations on the production line, meets labor rates and quality control with minimal supervision. Essential Function and Responsibilities Produces components by assembling parts and subassemblies Operate production line equipment and hand/power tools efficiently at all workstations to assemble components. Meets standard labor rates while maintaining quality standards. Completes tasks directed by Supervisor with minimal supervision. Communicate & flex with co-workers to meet production goals. Complete daily labor sheets and required production documentation. Maintains work area and equipment in a clean and orderly condition and follows safety regulations daily. Follows technical and verbal assembly instructions. May perform other duties as required and/or assigned. Qualifications The requirements listed below are representative of the knowledge, skills, physical demands and/or ability required for this position to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: High School Diploma or equivalent Basic reading, writing, and arithmetic skills Able to build to print at quality level Manual dexterity required for using various tools and operating machinery Mechanical and electrical skills (2-3 years) Ability to read bill of materials and product work instructions Physical Demands and Working Environment: Ability to lift up to 50 pounds Exposure to moving mechanical parts Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description Mechanical and Electrical Assembler