Assembler
Assembly Line Worker Job 31 miles from Diamond Bar
Teledyne Relays (a business unit of Teledyne Defense Electronics, LLC) is a manufacturer of Electromechanical Relays, Solid State Relays, Power Controllers, RF COAX Switches and RF Matrix switching systems. The primary manufacturing facilities are located in the United States and Mexico. We are a vertically orientated manufacturing and design company with major operations in Southern California.
Teledyne Relays' mission, vision, and value statements have never really changed in principle since 1963. Dedication to every employee and client's success; Innovation that matters - for our company and for the world; Trust and personal responsibility in all relationships - Teledyne Relays is EveryWhereYouLook!
We are hiring an Assembler for a full-time, onsite position in Hawthorne, CA.
Hours: 6 AM - 2:30 PM
Pay Rate: $22 per hour
Responsibilities
Follow procedures on SS Relays
Maintain a labor book/log, prepares reports
Works on assignments that are moderately complex in nature where judgment is required in resolving problems and making routine recommendations
Manual and Automatic Testing on Relays
Performs other duties as assigned or requested, ability to use equipment for a variety of applications
Required Qualifications
High School diploma or equivalent (GED), technical training/certification preferred
1-2 years of previous/related experience in assembly
Must have good eye-hand coordination to use small hand tools
Must have good working knowledge of computers, and good knowledge of basic math
Must be able to apply common sense understanding to carry out written/oral/diagram form instructions and be able to deal with problems with concrete variables
Must be able to read and interpret specifications and drawings
Must be a US Person- US Citizens, US Nationals, lawful permanent residents, asylees or refugees
ITAR regulations dictate that information and material pertaining to defense and military related technologies may only be shared with US Persons unless authorization from the Department of State is received or a special exemption is used.
In our efforts to maintain a safe and drug-free workplace, Teledyne Relays requires that candidates complete a satisfactory background check and pass a drug screen prior to employment.
Due to the type of work at the facility and certain access restrictions, successful applicants must be a "US Person" (US Citizens, US Nationals, lawful permanent residents, asylees or refugees).
Please note the salary range posted below is a general guideline for this job level and location. When extending an offer, a variety of factors are considered such as responsibilities of the position, relevant education and experience, certifications, knowledge and skills.
Electrodialysis Assembly and Operator Technician
Assembly Line Worker Job 21 miles from Diamond Bar
Are you excited by the potential of large-scale carbon removal?
If so, Captura Corp. is seeking an ED Assembly and Operator Technician to join us.
Captura is an early-stage technology start-up with the mission to develop globally scalable carbon removal to support a sustainable future for the world's climate. Captura's unique technology was developed and proven in Caltech's laboratories and uses established electrochemical concepts to enable gigaton-scalable solutions for removing carbon dioxide (CO2) from the atmosphere via direct ocean capture. We capture carbon dioxide using only renewable electricity and seawater, creating no byproducts. CO2-depleted seawater is returned to the ocean to absorb CO2 that comes from the atmosphere.
Key Responsibilities:
Set up, monitor, adjust, and operate lab-scale electrodialysis systems with senior electrodialysis engineers.
Assist mechanical and build engineers in system construction.
Oversee and maintain the daily operation of Captura's newly expanded workshop space.
Troubleshoot technical issues, identify root causes, and resolve them when they arise.
Adhere to all applicable regulations, policies, and procedures for health, safety, and environmental compliance.
Cooperate with the Captura's R&D team and contribute for the optimization and scale up of electrodialysis systems.
Role Requirements:
Experience with electrodialysis or electrochemistry and working in a wet lab.
Ability to work independently in small teams.
Excellent problem-solving skills and the ability to work collaboratively in a team environment.
Strong communication skills, both written and verbal.
Nice to have:
Relevant hands-on experience in the build and operation of liquid materials processing engineering systems (pool, chemical, petrochemical, water, mining, oil&gas plants, etc.)
Experience with construction and assembly of PVC-pipe based water/plumbing systems
Electro-Assembler Wanted
Assembly Line Worker Job 23 miles from Diamond Bar
Company is looking for an Electro-Mechanical Assembler Overview of your day-to-day • Assembling a variety of testers, rack assemblies, cables and harnesses along with various other mechanical assemblies • Constructing cables/harnesses from schematic • Wiring diagrams, including pulling cables through braiding and tubing
• Constructing Interface Test Adapters (ITAs) including all internal wiring and
PCBs using schematics diagrams
• Wiring prototype PCBs from schematics
• Installing and soldering components onto PCBs
• Reworking CCAs
• Constructing rack systems and portable testers including mechanical assembly
and wiring
• Constructing mechanical assemblies from Manufacturer Assembly
Instructions (MAI).
• Additional tasks assigned by Area Manager and/or Program/Project Manager
What qualifies you?
• AS or equivalent experience preferred
• 5+ years of experience working in electro-mechanical Environment including:
building prototypes
constructing military cables/harnesses for ATE
reading schematics, wire lists, blueprints, mechanical assembly,
fabrication drawings
following verbal assembly instructions
assembly and wiring of test systems
Utilizing tools such as torque wrenches, solder irons, continuity testers,
calipers, pin extraction tools, Wire crimpers, riveting tools…
Soldering skills with thru-hole and SMT components
IPC-A610, IPC/WHMA-A-620
Lifting heavy equipment
Irvine, CA.
$25 - $31 an hour DOE
For more information please call me, Adriana, at (562) ###-#### or email me at ...@kellyservices.com
As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community.
Get a complete career fit with Kelly .
You're looking to keep your career moving onward and upward, and we're here to help you do just that. Our staffing experts connect you with top companies for opportunities where you can learn, grow, and thrive. Jobs that fit your skills and experience, and most importantly, fit right on your path of where you want to go in your career.
About Kelly
Work changes everything. And at Kelly, we're obsessed with where it can take you. To us, it's about more than simply accepting your next job opportunity. It's the fuel that powers every next step of your life. It's the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year.
Kelly Services is proud to be an Equal Employment Opportunity and Affirmative Action employer. We welcome, value, and embrace diversity at all levels and are committed to building a team that is inclusive of a variety of backgrounds, communities, perspectives, and abilities. At Kelly, we believe that the more inclusive we are, the better services we can provide. Requests for accommodation related to our application process can be directed to Kelly's Human Resource Knowledge Center.Kelly complies with the requirements of California's state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.
Production Worker (Lay Up Operator) - 2nd Shift
Assembly Line Worker Job 13 miles from Diamond Bar
Job Details Entry 0T534 CA - El Monte, CA N/A Full Time High School $17.46 - $23.62 Hourly None 2nd Shift Manufacturing
2nd Shift: 2:00 p.m. to 10:30 p.m.
Who We Are:
The Gill Corporation is one of the world's largest manufacturers of honeycomb, high performance floor panels, cargo compartment liners and original equipment for passenger and freighter aircraft. The company also excels in many other types of reinforced plastics including interior sandwich panels for creating structures such as aircraft galleys and bulkheads, honeycomb core and related products.
Summary:
We are looking for individuals with or without prior experience in production assembly. High attention to detail, accuracy, efficiency and a team player are key qualities to be successful in this role.
Responsibilities:
Primarily responsible for laying up panels and liners prior to the work order to load and unload into the press and assembling precut material slices (Balsa, Aluminum, Nomex) into panels or liners.
Will check core accuracy according to work order and that orders are properly signed off on.
Prepare and stage all left over materials to be returned back to warehouse.
Ensures all materials used are within shelf-life requirements.
Makes sure housekeeping is being maintained and all containers are properly labeled.
Qualifications:
Minimum 1-year Manufacturing experience (Assembly/Machine Operating/Warehouse)
Basic PC Computer Skills
Must be able to lift, push & pull a minimum of 50 lbs.
Ability to reach, grab, pull and stand for entirety of shift.
A minimum composite score of 240 on the Wonderlic Basic Math Skill Test is required.
Benefits offered:
Full range of medical benefits, dental, vision
Life Insurance
401(K) and Profit Sharing
Paid Vacation, Sick Leave and 10 Paid Holidays
Tuition Reimbursement
Employee discounts to theme parks, attractions, shows and more!
Shift differentials
ITAR Requirement:
This position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify U.S. person status under the ITAR and the EAR. A “U.S. person” according to their definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee, or asylee.
The Gill Corporation is an Equal Opportunity Employer
. Applicants for all job openings are welcome and will be considered without regard to race, religious creed, color, age, sex, gender identity, gender expression, genetic information, sexual orientation, national origin, religion, marital status, medical condition, physical or mental disability, military service, pregnancy, childbirth and related medical conditions, or any other classification protected by federal, state, and local laws and ordinances.
The Gill Corporation provides reasonable accommodations
to qualified individuals with disabilities in accordance with the Americans with Disability Act and applicable state and local law. If you require an accommodation in the application process, please notify the Human Resources Department.
Assembly Line Worker/ Packer/ Product Handler/ Loader
Assembly Line Worker Job 14 miles from Diamond Bar
Who We Are: With over 11,000 employees at over 40 facilities across US & Europe, Hearthside Food Solutions is one of the fastest growing food companies and the industry's largest contract manufacturer. Our secret to success? Our people. We know an investment in our people is an investment in our company. We strive to understand our team members and support them however we can. By empowering employees through skill development and career advancement opportunities, we emphasize a culture of continuous improvement - both for the business and our people. We want team members that will support us in owning safety together - speaking up when they see a problem. When we focus on our people and safety, it ensures we all are driving better performance as well as on time delivery to our customers!
What We Want to Give to You:
We offer a competitive wage and wide array of benefits including: • health/dental/vision insurance • flex spending accounts • short & long-term disability • paid holidays and vacation • bonuses opportunities (referral, production, etc.).
Job Summary:
We have a variety of general labor openings throughout our facilities. Previous manufacturing experience isn't needed! What is important is a strong work ethic and ability to work in a team environment! You might be mixing products, weighing/scaling material, packaging material, or supplying our lines with product. Whatever role you are assigned to, you will need to be reliable and able to work within industry standard Good Manufacturing Practices (GMP's) at all times. Some of the GMP's will vary by location (i.e., artificial nails/eyelashes, nail polish, jewelry, etc. cannot be worn while producing and/or packaging food products).
Job Duties and Responsibilities:
* Inspect product for quality and any signs of foreign material contamination.
* Supply production lines as needed.
* Responsible for correct placement of product on line or in containers, boxes, or pallets.
* Maintains works area in a clean and organized manner.
* Performs all other duties as assigned.
Knowledge, Skills, and Abilities Required:
* Must be knowledgeable in GMPs or the willingness to learn.
* Sufficient math skills.
* Must have the ability to understand and follow all safety policies and procedures
* Ability to read and write in English preferred.
Job Qualifications:
* High school diploma or equivalent is preferred.
* Must be at least 18 years of age.
Work Environment:
* This is a manufacturing environment and there will be an exposure to a variety of machines, noise levels, and varying temperatures.
* This is a team environment; all employees must be able to work together and communicate in a respectful and professional manner.
* Must be able to work necessary overtime based on staffing needs and customer demand, as well as across shifts.
Physical Requirements:
* Ability to stand and work with your hands throughout the duration of the shift.
* Ability to lift at least 25lbs.
* Depending on which location, our environments can be very cold or very warm.
Equal Opportunity Employer.
If you need assistance applying, please contact Human Resources.
Assembler II (Second Shift)
Assembly Line Worker Job 23 miles from Diamond Bar
The Assembler II uses a variety of tools, fixtures, work instructions and test equipment perform a series of operations to correctly assemble and test medical devices. Responsibilities: * Understand and follow detailed assembly instructions, processes, and procedures.
* Comply with policies, guidelines, and regulatory requirements per the Quality System.
* Report problems with quality, processes, equipment, and materials to Project Engineer/ Supervisor.
* Provide hands on job function training to coworkers as needed.
* Maintain a clean and organized work area to facilitate manufacturing functions.
* Perform other duties as assigned.
Qualifications:
* High school diploma or equivalent.
* 5 or more years of related medical device experience preferred.
* Extended use of microscope
* Extended periods of sitting or standing Moderate lifting
* Primary tasks take place in a cleanroom environment. Cleanrooms are controlled environments with low levels of pollutants such as dust, airborne microbes, aerosol particles, and vapors.
* Medical device manufacturing experience.
* Ability to work in a cleanroom environment.
* Ability to follow written company procedures.
* Ability to do small assembly work using a microscope.
* Knowledge of basic measuring techniques including scales, rulers, US and metric measurement.
* Good communication skills.
Inari Medical offers competitive health and wealth benefits for our employees. The base pay for this position is $21.00/hour. Actual total compensation may vary.
Inari Medical is an Equal Opportunity/Affirmative Action employer including protected Veterans and individuals with disabilities.
Know your Rights: Workplace Discrimination is Illegal Poster
Disability accommodation for employment applicants
Family and Medical Leave Act (FMLA)
Pay Transparency Notice
Assembly Line Worker (Part-Time)
Assembly Line Worker Job 34 miles from Diamond Bar
Second Spectrum is a Sports Emmy-winning data & tech company that is building the next way of seeing sports - by capturing and producing the highest quality data and innovative content for many of the world's largest leagues and media partners, such as the NFL, NBA, English Premier League, ESPN, Amazon, and CBS Sports.
We are pushing the boundaries of deep tech -- machine learning, computer vision, big data, augmented and virtual reality. We deliver unique and innovative products with a magic formula of cutting-edge technology, creative design, and hands-on experience playing and analyzing college and professional sports. These products have helped Second Spectrum partners to multiple NBA championships, to win matches on football pitches around the world, and to entertain and educate millions of fans on TV and digital. In 2021, Second Spectrum was acquired by Genius Sports, bringing together a unique combination of technological, operational and commercial capabilities.
We believe that technology will revolutionize the way that sports are played, coached, and experienced. We're just getting started turning our joint vision of transformative sports technologies into reality.
Second Spectrum is the place to work on cutting edge technology in sports, alongside incredibly driven and ambitious teammates. Our innovative and dynamic environment emphasizes opportunities for motivated individuals to maximize their growth and impact.
The Role - Assembly Line Worker (Part-Time)
For our next generation tracking system, Dragon, the edge units will be housed in custom enclosures to be produced and assembled by an internal group. This group is also responsible for scheduling and managing the people that do assembly work and ensuring the proper supply of components is available to meet the assembly line production schedule.
The Assembly Line Worker will be responsible for assembling enclosures and parts on the production line and verifying that all parts and components are assembled correctly and in a timely manner under direction of a supervisor. Assembly will be done using your hands and tools requiring adequate precision and dexterity.
This role is a part-time position based in our L.A office. The hourly pay for this role is $18/hour and you can expect approximately 30 hours per week. A number of factors influence the specific offer, including seniority, and relevant educational and working experience.
Specifically, you can expect to:
Follow verbal and written instructions in order to assemble components and products
Ensure the quality of parts and components used in the assembly process
Report any problems during assembly to supervisors
Test finished products for defects
Inventory parts and tools used in the assembly process
Maintain a clean and safe work area
Minimum Qualifications
Good mechanical acumen, be familiar with common hand tools and best practices for using them
Comfortable with programming and testing PCBAs (printed circuit board assemblies)
Able to read and interpret instructional documents
Can handle repetitive tasks
Good communication and interpersonal skills
Attention to detail and accuracy
Ability to solder is a plus
Preferred Qualifications
1+ years of experience as a member of an assembly line or similar process
Second Spectrum, part of Genius Sports Group, is proud to be an equal opportunity employer. We recognize and celebrate the benefits that a diverse and inclusive workforce bring to our business, our customers, and our staff. We welcome and will consider all applications regardless of age, different abilities or disability, gender identity or re-assignment, marriage, pregnancy, maternity, race or nationality, religion or belief, sex and sexual orientation (and any other applicable status). Please let us know when you apply if you need any assistance during the recruiting process due to a disability.
Assembler I
Assembly Line Worker Job 26 miles from Diamond Bar
Assembles materials and products manually, operates auxiliary equipment and performs quality functions to ensure product meets quality criteria. Follow all work processes implemented in the department, all safety and company guidelines as outlined in Cambro employee handbook.
ESSENTIAL JOB FUNCTIONS
Ensures quality standards are maintained in handling, packaging and finishing of all products assembled/packaged.
Comply with safety, operating policies, procedures regarding equipment, materials, and finished goods.
Performs sanding, polishing, cleaning, assembly and packing job tasks as assigned.
Ensures correct quantity of product per carton and proper assembly/packaging requirements are followed.
Read and follow assembly schedule, write tickets and make labels, W.I.P., or products accurately. Verifies box and UPC label accuracy with packaged product. Fills out and maintains required data on production-related forms.
Inspects the product at each step of the secondary and/or packaging process for quality defects. Performs necessary post-molding operations and rework as required to adhere to quality standards.
Flexible to work on all packing/assembly operations
Maintains a clean and organized workstation. Maintains strict housekeeping guidelines and safety practices at all times.
Recognize and report any problems, issues, discrepancies, or questions to Process Technician and/or Supervisor in a timely fashion.
Must be able to read and understand instructions for assembly, packaging and operating secondary machinery.
Maintain reliable and consistent attendance, including being punctual, and dependable in order to meet the needs of the department and the organization.
Execute each essential duty satisfactorily in order to perform job successfully.
Follows all safety procedures required in work area, wears PPE as needed, attends all safety meetings, and reports safety issues regarding equipment or unsafe/hazardous conditions.
Performs effectively as a team member, able to work well with others, open to receive and give feedback, and treats everyone with respect.
Takes ownership of own work and behavior, accepts accountability for own actions, encourages solutions, and communicates status of work/projects.
Follow all department quality standards/criteria. Raise concerns and issues to immediate manager.
Able to understand and demonstrate Cambro company culture, display company core values (Safety, Quality, Respect, and Service).
Understands department's key performance indicators and contributes to achieve these goals both individually and as a team.
Other duties as needed or required.
ADDITIONAL RESPONSIBILITIES
Must be able to work overtime as needed, remain flexible and open to possible schedule changes in order to meet business needs.
REQUIRED QUALIFICATIONS
The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
High school diploma or general education degree (GED); or up to six months related experience; or equivalent combination of education and experience.
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to speak effectively with employees of organization.
Must be a good team player, self-motivated and open-minded. Must be able to work with minimal supervision, meet and maintain high quality work standards, and adapt quickly to new projects/assignments. Must be able to work any shift as needed.
PREFERRED QUALIFICATIONS
English preferred
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Sitting, walking, standing, bending at the neck, bending at the waist, squatting, climbing, kneeling, crawling, twisting at the neck and waist, repetitive use of hands, simple grasping, power grasping, fine manipulation, pushing and pulling, reaching above and below the shoulder, carrying/lifting up to 50 lbs.
Driving cars, trucks, forklifts and other equipment
Working around equipment and machinery
Exposure to excessive noise
Exposure to dust, gas, fumes or chemicals
Working at heights
Use of special visual or auditory protective equipment
Walking on uneven ground
Operation of foot controls or repetitive foot movement
Risk of exposure to bio-hazard while working such as: bloodborne pathogens, sewage, hospital waste, etc.
PPE REQUIREMENTS
Safety glasses
Utility gloves
Steel-toe slip-resistant shoes
Hardhat
Hearing protection (e.g. ear plugs, ear muffs)
Face shields
Face covering (mask) in accordance with company policy.
COMPENSATION RANGE:
$16.63 - $16.63
Salary may vary based on experience.
CAMBRO is proud to be an equal-opportunity workplace. All qualified applicants will receive consideration for employment without regard to and will not be discriminated against based upon race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic information, military or veteran status, or other characteristics protected by law.
Assembler II/ Inspector (Experienced)
Assembly Line Worker Job 23 miles from Diamond Bar
Essential Function Examples:
Identifies and assembles bearings completely after method of assembly has been established and after inspection of parts has been completed. On non-complex bearings, interprets blueprints and specification sheets to determine requirements for the bearing or component part.
Sets up standard mechanical and air gages to check bearing components, and partially and/or completely assembled bearings for conformance to standards. Receives instructions from supervisor or designated individual on how to maintain complex inspection equipment.
Secures first article inspection to verify set-up and continues to check the parts for conformance to standard throughout the course of the run. At the completion of the run, the incumbent obtains inspection buyoff before going to the next job.
Uses mathematics involving decimals and fractions to operate inspection equipment, check tolerances and fit up of bearings. Must be able to use tables and charts to assist in the use of mathematics.
Follows assembled bearings to assure they are packed according to specifications and are physically shipped when requested to do so by the supervisor.
Identifies and assembles bearings completely after method of assembly has been established and after inspection of parts has been completed. On non-complex bearings, interprets blueprints and specification sheets to determine requirements for the bearing or component part.
Sets up standard mechanical and air gages to check bearing components, and partially and/or completely assembled bearings for conformance to standards. Receives instructions from supervisor or designated individual on how to maintain complex inspection equipment.
Secures first article inspection to verify set-up and continues to check the parts for conformance to standard throughout the course of the run. At the completion of the run, the incumbent obtains inspection buyoff before going to the next job.
Uses mathematics involving decimals and fractions to operate inspection equipment, check tolerances and fit up of bearings. Must be able to use tables and charts to assist in the use of mathematics.
Follows assembled bearings to assure they are packed according to specifications and are physically shipped when requested to do so by the supervisor.
Experience: High school diploma or general education degree (GED), and a minimum of one year of experience in precision bearing assembly using a variety of precision checking techniques.
Knowledge/Skills/Abilities:
Competence to interpret blueprints and decipher documents such as safety rules, operating and/or procedure manuals. Competence to use standard measuring equipment. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graph.
Special Requirements:
Some overtime may required, including weekends.
How to Apply:
To apply, please submit your resume highlighting your relevant experience and interest in the role, you may also email your resume to ************************** or call our front office at **************. We look forward to hearing from you!
Pay Range: $17 to $23 per hour
**Please note that the salary range information is only applicable to California. This range is the company's good faith and reasonable estimate of the compensation for this role based on the position's responsibilities, qualifications, experience, and other relevant factors. Actual compensation may vary depending on the selected candidate's specific experience, education, skills, and other relevant factors.
Equal Opportunity Employer
Industrial Tectonics Bearings is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, disability, or veteran status.
This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a US citizen, lawful permanent resident [“green card” holders] or have refugee or asylee status.
E/M Assembler
Assembly Line Worker Job 23 miles from Diamond Bar
We're looking for candidates with 5+ years of experience.
Assembling a variety of testers, rack assemblies, cables and harnesses along with various other mechanical assemblies
Candidates must know how to do splicing with solder sleeves.
Constructing cables/harnesses from schematic
25 - 100 cables in a bundle
Wiring diagrams, including pulling cables through braiding and tubing; crimp contacts to connectors; splice wires.
Constructing Interface Test Adapters (ITAs) including all internal wiring and PCBs using schematics diagrams
Wiring prototype PCBs from schematics
Installing and soldering components onto PCBs
Reworking CCAs
Constructing rack systems and portable testers including mechanical assembly and wiring
Constructing mechanical assemblies from Manufacturer Assembly Instructions (MAI).
Additional tasks assigned by Area Manager and/or Program/Project Manager
Qualifications:
AS or equivalent experience preferred
5+ years of experience working in electro-mechanical Environment including:
building prototypes
constructing military cables/harnesses for ATE
reading schematics, wire lists, blueprints, mechanical assembly, fabrication drawings
following verbal assembly instructions
assembly and wiring of test systems
Utilizing tools such as torque wrenches, solder irons, continuity testers, calipers, pin extraction tools, Wire crimpers, riveting tools
Soldering skills with thru-hole and SMT components
IPC-A610, IPC/WHMA-A-620 a MUST
Assembly Line Worker
Assembly Line Worker Job 25 miles from Diamond Bar
Shift Time:
We have several shifts, send me your resume to get the shift timings.
We are seeking a dedicated Assembler I to join our team in assembling fiber, filtration, and medical device components. Responsibilities include manual and automated assembly, device testing, packaging, and maintaining quality standards. This role follows detailed work instructions and operates under the guidance of senior assemblers and supervisors.
Requirements:
High School Diploma or equivalent.
0-1 year of manufacturing/assembly experience (medical device experience preferred).
Ability to lift up to 10- 50 lbs and work in a cleanroom environment.
Assembler
Assembly Line Worker Job 24 miles from Diamond Bar
Assembler I is responsible for fabricating component parts or assembling the finished product according to the customer's specifications. Secures and maintains correct component parts and supplies required for the operation.
Principle Duties and Responsibilities
Completes work area setup
Fits parts together in accordance with prescribed instructions and in accordance with quality standards
Operates hand tools as required to complete the assembly process
Stacks completed products in accordance with established procedures, and if required, may cover, label, and band components finished product
Ensures work area is safe, clean and organized, and that equipment is safe to operate
Completes pre-shift startup equipment inspection checklist and reports any problems or concerns
Maintains a clean and orderly work environment
Maintains production records as required
Checks materials and finished products to ensure they are compliant with standards
Performs duties consistent with established safety and quality procedures, rules, and standards
Participates in safety, CI, and other programs and meetings
Performs other duties as assigned
Qualifications
High school diploma/GED preferred but not required
No minimum experience is required however, 6 months of manufacturing and assembling experience is preferred
Working knowledge of basic math preferred
Must be at least 18 years of age
Compensation & Benefit Information:
Hourly/Salary Pay Range: $17-18 hourly dependent on experience*
*pay range may be adjusted depending on cost of living
Bonus/Incentive Pay
(appropriate item below would be inserted based on the job
):
For hourly positions with incentive pay: Incentive pay may be available for certain job roles and may include piece rate incentives, weekly production bonuses, trip rates, and employee referral bonuses. A discretionary annual bonus based on Company and business unit performance may also be provided.
Benefits currently offered to our employees:
Medical insurance
Health savings account with company contribution
Dental insurance
Vision insurance
Basic and voluntary life insurance
Disability insurance
401(k) plan with company match
Paid vacation and holidays
Stock purchase program with employee discount
Educational reimbursement
Wellness programs and challenges
Other supplemental benefits
Click here to watch what a day in the life of an Assembler looks like.
The Company is an Equal Opportunity Employer.
Warehouse Assembly Worker
Assembly Line Worker Job 35 miles from Diamond Bar
The warehouse worker will stage, load, and unload finished product and raw materials and stock and maintain warehouse inventory.
ESSENTIAL DUTIES AND RESPONSIBILITIES
The essential functions include, but are not limited to the following:
Assembling parts for finished goods packaging
Packaging finished products for inventory / shipping (shrink wrapping, boxing, labeling)
Staging finished products for loading
Loading finished products onto truck
Unloading raw materials from truck
Moving raw materials to warehouse storage
Moving waste from assembly line to dumpsters or scrap bins
Being responsible for quality control
Operating within standard operating procedures and Safety Standards
Assisting in shop however necessary
Operating forklift, hand truck, pallet jack
Completing daily logs
Communicating with operators from other departments or shifts
Cleaning and maintaining work area
Turning off and locking out equipment when not in use
Performing back-up for shipping and receiving
Maintaining material supply adhering to inventory level set forth by Operations Manager
Other duties as assigned
Requirements
MINIMUM QUALIFICATIONS (KNOWLEDGE, SKILLS, AND ABILITIES)
High School Diploma or GED preferred, or an equivalent combination of education and experience
1-2 years of related experience working in similar industry
Good oral and written communication skills
Manual dexterity required for operating machinery and hand tools
Ability to be a team player and meet deadlines
PHYSICAL DEMANDS AND WORK ENVIRONMENT
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions.
While performing the duties of this position, the employee frequently is required to use hands or finger, handle, or feel objects, tools or controls. The employee is occasionally required to stand; walk; sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this position include close vision, distance vision, peripheral vision, and the ability to adjust focus. Machinery operation requires the use of safety equipment to include but not limited to; eye safety glasses, hearing protectors, work boots, and hardhats. Loose fitting clothes and jewelry are not permitted. The noise level in the work environment is usually moderate to high.
NOTE
This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship.
Salary Description $16-20
Line worker
Assembly Line Worker Job 8 miles from Diamond Bar
Essential Functions
Ziegenfelder Production Staff are responsible for:
Placing sealed individual units in packaging and ensuring proper package sealing.
Repackaging improperly sealed, or coded, product.
Disposing of scrap product and raw materials.
Keeping work area clean.
Ensuring compliance with all federal, state, local, and Ziegenfelder environmental, health, and safety directives, policies, and procedures.
Qualifications and Education Requirements
Food service and/or production experience preferred.
High school diploma/GED or equivalent experience.
Physical Abilities
Standing up to 8 hours per day.
Moving and lifting objects weighing up to 50 lbs. regularly.
Bending, twisting, reaching, and grasping actions.
Good spatial awareness working around manufacturing equipment.
Working Conditions
May be subject to noise above 85 decibels with proper protection equipment.
Who We Are
The Armstrong Group is a family owned and operated collection of diverse companies. What began in 1946 as Armstrong County Line Construction, founded by Jud L. Sedwick in Kittanning, PA, has now grown into an organization that encompasses multiple industries and employs over 2,400 individuals nationwide. Our brands include Armstrong Utilities, Guardian Protection, Armstrong Development, 4Front Solutions, Twin Pops, and Armstrong Comfort Solutions.
Armstrong is an Equal Opportunity Employer.
Line Worker
Assembly Line Worker Job 8 miles from Diamond Bar
Essential Functions
Ziegenfelder Production Staff are responsible for: Placing sealed individual units in packaging and ensuring proper package sealing. Repackaging improperly sealed, or coded, product. Disposing of scrap product and raw materials.
Keeping work area clean.
Ensuring compliance with all federal, state, local, and Ziegenfelder environmental, health, and safety
directives, policies, and procedures.
Qualifications and Education Requirements
Food service and/or production experience preferred.
High school diploma/GED or equivalent experience.
Physical Abilities
Standing up to 8 hours per day.
Moving and lifting objects weighing up to 50 lbs. regularly.
Bending, twisting, reaching, and grasping actions.
Good spatial awareness working around manufacturing equipment.
Working Conditions
May be subject to noise above 85 decibels with proper protection equipment.
Who We Are
The Armstrong Group is a family owned and operated collection of diverse companies. What began in 1946 as Armstrong County Line Construction, founded by Jud L. Sedwick in Kittanning, PA, has now grown into an organization that encompasses multiple industries and employs over 2,400 individuals nationwide. Our brands include Armstrong Utilities, Guardian Protection, Armstrong Development, 4Front Solutions, Twin Pops, and Armstrong Comfort Solutions.
Armstrong is an Equal Opportunity Employer.
Communications Tower and Line Worker
Assembly Line Worker Job 19 miles from Diamond Bar
The Communications Tower and Line Worker (CTLW) works under the direction of a Communications Tower and Line Supervisor or user agency personnel and are characterized by their work at heights on steel communications towers. This classification installs, alters, maintains, and repairs communication antennas. They will regularly lift tools, supplies, and equipment exceeding 50 pounds, climb steel towers up to 200 feet tall, use lineman gaffs to climb utility poles, and perform tasks that require lifting, reaching, pulling, and bending. The CTLW will install, alter, maintain, and repair communications antennas, including microwave dish antennas with radomes and associated antenna feeds; fabricate and assemble cable raceway and antenna mounting hardware; perform structural maintenance of tall steel towers and occasionally erect monopoles; install, maintain and repair telephone poles, crossarms, pole fixtures, and guy wires; and trim trees around the communication sites, equipment and communication lines. The CTLW will perform rigging and lifting using utility line trucks and equipment; operate a forklift and other material-handling equipment; operate utility line truck booms, attachments and winches for aerial access, auguring, lifting, and pole setting; drive automotive equipment, including vehicles exceeding 26,000 pounds GVWR, to and from work sites; and tow trailers and pole dollies as required. The CTLW will possess knowledge of the protocols, procedures, techniques and equipment used to install, alter, maintain and repair communications antennas, and copper and fiber-optic lines, cables and related accessories. They will have the knowledge to exercise safe work practices in rigging, working at heights on microwave communications towers and utility poles, and in manholes and other below-grade confined spaces. They will possess a high degree of attention to detail and safety procedures to prevent injury to themselves and others. They will possess knowledge and experience in customer services; interpersonal skills; decision making; organization awareness; problem solving; oral communication; and ability to troubleshoot issues.
Experience Required:
Three (3) years of experience in the installation, alteration, maintenance and repair of outside overhead communications or power lines and equipment, with one (1) year at the journey-level.
Education Required: Completion of at least three (3) years in a recognized telephone or power line worker apprentice training program
a current and valid OSHA approved Competent Climber / Rescuer Certification, and a valid class B driver's license.
Physical dexterity, color perception, and visual acuity are required to perform essential job-related functions effectively and safely. Additional qualifying experience may be substituted for the required education on a year-for-year basis.
The Competent Climber / Rescuer Certification and class B driver's license are required and may not be substituted with additional experience.
Additional Information May be assigned a company vehicle or be partnered in a pool vehicle. Ride-a-longs for the first couple of months regarding training. 100% onsite, in the field. Will be in their seat, in the "yard" by 6:30am every morning, working on a 4-10 system, with Fridays off. The reporting location is: Pacoima, CA 91331 Tools will be assigned and released from the county. At the conclusion of the project, they will need to return to the County. Consultant/Qualified Vendors will be responsible to replenish any missing tools. Will be assigned a company laptop/device(s) Must have California, Commercial Driver's License
Assembler I
Assembly Line Worker Job 26 miles from Diamond Bar
Assembles materials and products manually, operates auxiliary equipment and performs quality functions to ensure product meets quality criteria. Follow all work processes implemented in the department, all safety and company guidelines as outlined in Cambro employee handbook.
ESSENTIAL JOB FUNCTIONS
Ensures quality standards are maintained in handling, packaging and finishing of all products assembled/packaged.
Comply with safety, operating policies, procedures regarding equipment, materials, and finished goods.
Performs sanding, polishing, cleaning, assembly and packing job tasks as assigned.
Ensures correct quantity of product per carton and proper assembly/packaging requirements are followed.
Read and follow assembly schedule, write tickets and make labels, W.I.P., or products accurately. Verifies box and UPC label accuracy with packaged product. Fills out and maintains required data on production-related forms.
Inspects the product at each step of the secondary and/or packaging process for quality defects. Performs necessary post-molding operations and rework as required to adhere to quality standards.
Flexible to work on all packing/assembly operations
Maintains a clean and organized workstation. Maintains strict housekeeping guidelines and safety practices at all times.
Recognize and report any problems, issues, discrepancies, or questions to Process Technician and/or Supervisor in a timely fashion.
Must be able to read and understand instructions for assembly, packaging and operating secondary machinery.
Maintain reliable and consistent attendance, including being punctual, and dependable in order to meet the needs of the department and the organization.
Execute each essential duty satisfactorily in order to perform job successfully.
Follows all safety procedures required in work area, wears PPE as needed, attends all safety meetings, and reports safety issues regarding equipment or unsafe/hazardous conditions.
Performs effectively as a team member, able to work well with others, open to receive and give feedback, and treats everyone with respect.
Takes ownership of own work and behavior, accepts accountability for own actions, encourages solutions, and communicates status of work/projects.
Follow all department quality standards/criteria. Raise concerns and issues to immediate manager.
Able to understand and demonstrate Cambro company culture, display company core values (Safety, Quality, Respect, and Service).
Understands department's key performance indicators and contributes to achieve these goals both individually and as a team.
Other duties as needed or required.
ADDITIONAL RESPONSIBILITIES
Must be able to work overtime as needed, remain flexible and open to possible schedule changes in order to meet business needs.
REQUIRED QUALIFICATIONS
The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
High school diploma or general education degree (GED); or up to six months related experience; or equivalent combination of education and experience.
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to speak effectively with employees of organization.
Must be a good team player, self-motivated and open-minded. Must be able to work with minimal supervision, meet and maintain high quality work standards, and adapt quickly to new projects/assignments. Must be able to work any shift as needed.
PREFERRED QUALIFICATIONS
English preferred
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Sitting, walking, standing, bending at the neck, bending at the waist, squatting, climbing, kneeling, crawling, twisting at the neck and waist, repetitive use of hands, simple grasping, power grasping, fine manipulation, pushing and pulling, reaching above and below the shoulder, carrying/lifting up to 50 lbs.
Driving cars, trucks, forklifts and other equipment
Working around equipment and machinery
Exposure to excessive noise
Exposure to dust, gas, fumes or chemicals
Working at heights
Use of special visual or auditory protective equipment
Walking on uneven ground
Operation of foot controls or repetitive foot movement
Risk of exposure to bio-hazard while working such as: bloodborne pathogens, sewage, hospital waste, etc.
PPE REQUIREMENTS
Safety glasses
Utility gloves
Steel-toe slip-resistant shoes
Hardhat
Hearing protection (e.g. ear plugs, ear muffs)
Face shields
Face covering (mask) in accordance with company policy.
COMPENSATION RANGE:
$16.63 - $16.63
Salary may vary based on experience.
CAMBRO is proud to be an equal-opportunity workplace. All qualified applicants will receive consideration for employment without regard to and will not be discriminated against based upon race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic information, military or veteran status, or other characteristics protected by law.
Assembler II
Assembly Line Worker Job 23 miles from Diamond Bar
Filled Inari Medical is an Equal Opportunity/Affirmative Action employer including protected Veterans and individuals with disabilities. Know your Rights: Workplace Discrimination is Illegal Poster Disability accommodation for employment applicants Family and Medical Leave Act (FMLA)
Pay Transparency Notice
Warehouse Assembly Worker
Assembly Line Worker Job 35 miles from Diamond Bar
Requirements
MINIMUM QUALIFICATIONS (KNOWLEDGE, SKILLS, AND ABILITIES)
High School Diploma or GED preferred, or an equivalent combination of education and experience
1-2 years of related experience working in similar industry
Good oral and written communication skills
Manual dexterity required for operating machinery and hand tools
Ability to be a team player and meet deadlines
PHYSICAL DEMANDS AND WORK ENVIRONMENT
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions.
While performing the duties of this position, the employee frequently is required to use hands or finger, handle, or feel objects, tools or controls. The employee is occasionally required to stand; walk; sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this position include close vision, distance vision, peripheral vision, and the ability to adjust focus. Machinery operation requires the use of safety equipment to include but not limited to; eye safety glasses, hearing protectors, work boots, and hardhats. Loose fitting clothes and jewelry are not permitted. The noise level in the work environment is usually moderate to high.
NOTE
This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship.
Salary Description 17 - 18
Assembler/Inspector
Assembly Line Worker Job 23 miles from Diamond Bar
Packages bearings for shipment, upon completion of cleaning and lubrication, following customer or military specifications and/ or in-house requirements, , including, the use of preservatives and the proper making of bearings and containers specified.
Incumbent is responsible for cleaning the area s/he is working in before completing the shift and/or prior to moving to another area for proper housekeeping.
Knowledge/Skills/Abilities:
Competency in reading and comprehending simple instructions and in reading short memos. Ability to write simple correspondence. Capability to effectively present information in a one-on-one or small group situation to customers, clients, and other employee's of the organization.
Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Capable of computing rate, ratio, and percent and to draw and interpret bar graphs.
Ability to apply a common sense understanding to carry out simple one or two step
instructions. Ability to deal with standardized situations with only occasional or
no variables.
Special Requirements:
Overtime may be required, including weekends.
MIN: $17.00 to $19.00
**Please note that the salary range information is only applicable to California. This range is the company's good faith and reasonable estimate of the compensation for this role based on the position's responsibilities, qualifications, experience, and other relevant factors. Actual compensation may vary depending on the selected candidate's specific experience, education, skills, and other relevant factors.
Equal Opportunity Employer
RBC Bearings, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, disability, or veteran status.
This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a US citizen, lawful permanent resident [“green card” holders] or have refugee or asylee status.