Assembler
Assembly Line Worker Job In Hawthorne, CA
Teledyne Relays (a business unit of Teledyne Defense Electronics, LLC) is a manufacturer of Electromechanical Relays, Solid State Relays, Power Controllers, RF COAX Switches and RF Matrix switching systems. The primary manufacturing facilities are located in the United States and Mexico. We are a vertically orientated manufacturing and design company with major operations in Southern California.
Teledyne Relays' mission, vision, and value statements have never really changed in principle since 1963. Dedication to every employee and client's success; Innovation that matters - for our company and for the world; Trust and personal responsibility in all relationships - Teledyne Relays is EveryWhereYouLook!
We are hiring an Assembler for a full-time, onsite position in Hawthorne, CA.
Hours: 6 AM - 2:30 PM
Pay Rate: $22 per hour
Responsibilities
Follow procedures on SS Relays
Maintain a labor book/log, prepares reports
Works on assignments that are moderately complex in nature where judgment is required in resolving problems and making routine recommendations
Manual and Automatic Testing on Relays
Performs other duties as assigned or requested, ability to use equipment for a variety of applications
Required Qualifications
High School diploma or equivalent (GED), technical training/certification preferred
1-2 years of previous/related experience in assembly
Must have good eye-hand coordination to use small hand tools
Must have good working knowledge of computers, and good knowledge of basic math
Must be able to apply common sense understanding to carry out written/oral/diagram form instructions and be able to deal with problems with concrete variables
Must be able to read and interpret specifications and drawings
Must be a US Person- US Citizens, US Nationals, lawful permanent residents, asylees or refugees
ITAR regulations dictate that information and material pertaining to defense and military related technologies may only be shared with US Persons unless authorization from the Department of State is received or a special exemption is used.
In our efforts to maintain a safe and drug-free workplace, Teledyne Relays requires that candidates complete a satisfactory background check and pass a drug screen prior to employment.
Due to the type of work at the facility and certain access restrictions, successful applicants must be a "US Person" (US Citizens, US Nationals, lawful permanent residents, asylees or refugees).
Please note the salary range posted below is a general guideline for this job level and location. When extending an offer, a variety of factors are considered such as responsibilities of the position, relevant education and experience, certifications, knowledge and skills.
Electrodialysis Assembly and Operator Technician
Assembly Line Worker Job In Pasadena, CA
Are you excited by the potential of large-scale carbon removal?
If so, Captura Corp. is seeking an ED Assembly and Operator Technician to join us.
Captura is an early-stage technology start-up with the mission to develop globally scalable carbon removal to support a sustainable future for the world's climate. Captura's unique technology was developed and proven in Caltech's laboratories and uses established electrochemical concepts to enable gigaton-scalable solutions for removing carbon dioxide (CO2) from the atmosphere via direct ocean capture. We capture carbon dioxide using only renewable electricity and seawater, creating no byproducts. CO2-depleted seawater is returned to the ocean to absorb CO2 that comes from the atmosphere.
Key Responsibilities:
Set up, monitor, adjust, and operate lab-scale electrodialysis systems with senior electrodialysis engineers.
Assist mechanical and build engineers in system construction.
Oversee and maintain the daily operation of Captura's newly expanded workshop space.
Troubleshoot technical issues, identify root causes, and resolve them when they arise.
Adhere to all applicable regulations, policies, and procedures for health, safety, and environmental compliance.
Cooperate with the Captura's R&D team and contribute for the optimization and scale up of electrodialysis systems.
Role Requirements:
Experience with electrodialysis or electrochemistry and working in a wet lab.
Ability to work independently in small teams.
Excellent problem-solving skills and the ability to work collaboratively in a team environment.
Strong communication skills, both written and verbal.
Nice to have:
Relevant hands-on experience in the build and operation of liquid materials processing engineering systems (pool, chemical, petrochemical, water, mining, oil&gas plants, etc.)
Experience with construction and assembly of PVC-pipe based water/plumbing systems
Production Worker (Lay Up Operator) - 2nd Shift
Assembly Line Worker Job In El Monte, CA
Job Details Entry 0T534 CA - El Monte, CA N/A Full Time High School $17.46 - $23.62 Hourly None 2nd Shift Manufacturing
2nd Shift: 2:00 p.m. to 10:30 p.m.
Who We Are:
The Gill Corporation is one of the world's largest manufacturers of honeycomb, high performance floor panels, cargo compartment liners and original equipment for passenger and freighter aircraft. The company also excels in many other types of reinforced plastics including interior sandwich panels for creating structures such as aircraft galleys and bulkheads, honeycomb core and related products.
Summary:
We are looking for individuals with or without prior experience in production assembly. High attention to detail, accuracy, efficiency and a team player are key qualities to be successful in this role.
Responsibilities:
Primarily responsible for laying up panels and liners prior to the work order to load and unload into the press and assembling precut material slices (Balsa, Aluminum, Nomex) into panels or liners.
Will check core accuracy according to work order and that orders are properly signed off on.
Prepare and stage all left over materials to be returned back to warehouse.
Ensures all materials used are within shelf-life requirements.
Makes sure housekeeping is being maintained and all containers are properly labeled.
Qualifications:
Minimum 1-year Manufacturing experience (Assembly/Machine Operating/Warehouse)
Basic PC Computer Skills
Must be able to lift, push & pull a minimum of 50 lbs.
Ability to reach, grab, pull and stand for entirety of shift.
A minimum composite score of 240 on the Wonderlic Basic Math Skill Test is required.
Benefits offered:
Full range of medical benefits, dental, vision
Life Insurance
401(K) and Profit Sharing
Paid Vacation, Sick Leave and 10 Paid Holidays
Tuition Reimbursement
Employee discounts to theme parks, attractions, shows and more!
Shift differentials
ITAR Requirement:
This position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify U.S. person status under the ITAR and the EAR. A “U.S. person” according to their definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee, or asylee.
The Gill Corporation is an Equal Opportunity Employer
. Applicants for all job openings are welcome and will be considered without regard to race, religious creed, color, age, sex, gender identity, gender expression, genetic information, sexual orientation, national origin, religion, marital status, medical condition, physical or mental disability, military service, pregnancy, childbirth and related medical conditions, or any other classification protected by federal, state, and local laws and ordinances.
The Gill Corporation provides reasonable accommodations
to qualified individuals with disabilities in accordance with the Americans with Disability Act and applicable state and local law. If you require an accommodation in the application process, please notify the Human Resources Department.
Assembly Line Worker/ Packer/ Product Handler/ Loader
Assembly Line Worker Job In Anaheim, CA
Who We Are: With over 11,000 employees at over 40 facilities across US & Europe, Hearthside Food Solutions is one of the fastest growing food companies and the industry's largest contract manufacturer. Our secret to success? Our people. We know an investment in our people is an investment in our company. We strive to understand our team members and support them however we can. By empowering employees through skill development and career advancement opportunities, we emphasize a culture of continuous improvement - both for the business and our people. We want team members that will support us in owning safety together - speaking up when they see a problem. When we focus on our people and safety, it ensures we all are driving better performance as well as on time delivery to our customers!
What We Want to Give to You:
We offer a competitive wage and wide array of benefits including: • health/dental/vision insurance • flex spending accounts • short & long-term disability • paid holidays and vacation • bonuses opportunities (referral, production, etc.).
Job Summary:
We have a variety of general labor openings throughout our facilities. Previous manufacturing experience isn't needed! What is important is a strong work ethic and ability to work in a team environment! You might be mixing products, weighing/scaling material, packaging material, or supplying our lines with product. Whatever role you are assigned to, you will need to be reliable and able to work within industry standard Good Manufacturing Practices (GMP's) at all times. Some of the GMP's will vary by location (i.e., artificial nails/eyelashes, nail polish, jewelry, etc. cannot be worn while producing and/or packaging food products).
Job Duties and Responsibilities:
* Inspect product for quality and any signs of foreign material contamination.
* Supply production lines as needed.
* Responsible for correct placement of product on line or in containers, boxes, or pallets.
* Maintains works area in a clean and organized manner.
* Performs all other duties as assigned.
Knowledge, Skills, and Abilities Required:
* Must be knowledgeable in GMPs or the willingness to learn.
* Sufficient math skills.
* Must have the ability to understand and follow all safety policies and procedures
* Ability to read and write in English preferred.
Job Qualifications:
* High school diploma or equivalent is preferred.
* Must be at least 18 years of age.
Work Environment:
* This is a manufacturing environment and there will be an exposure to a variety of machines, noise levels, and varying temperatures.
* This is a team environment; all employees must be able to work together and communicate in a respectful and professional manner.
* Must be able to work necessary overtime based on staffing needs and customer demand, as well as across shifts.
Physical Requirements:
* Ability to stand and work with your hands throughout the duration of the shift.
* Ability to lift at least 25lbs.
* Depending on which location, our environments can be very cold or very warm.
Equal Opportunity Employer.
If you need assistance applying, please contact Human Resources.
Line Worker
Assembly Line Worker Job In Torrance, CA
Job Title: Line Worker Union: CWA 9003 - VZ3 CBA 004 Hiring Manager: Robert Johns # of Openings: 1 Internal Posting Dates: 12/3/24 - 12/16/24 Wage Range: $19.99 - $44.34 per hour will be filled using 1st considerations.
Summary
Place, move, rearrange, replace, connect, disconnect, transfer, maintain, reroute, and remove aerial and underground plants, including service drops, house cables, and building terminals. Operate company vehicle as required. Perform such work under minimum supervision.
General Duties
Duties include, but are not limited to, the following:
* Work with heavy-duty power equipment, i.e., power dolly, power saws, power winch, and hand tools in the installation and maintenance of outside plant facilities. The nature of this work is a variety of tasks with only general guidelines as to instructions, practices and/or procedures in doing the work. There exists in this work considerable opportunity and possibility of making errors, and the consequences of making errors would be of importance in terms of time, material wastage and/or delay before the error is discovered and corrected.
* Handle and climb ladders and poles, work at heights in boom trucks, enter tunnels, building, trenches, crawl spaces, or manholes to place materials.
* Attach or detach various kinds of hardware to wires, cables, buildings or poles.
* Use test equipment to check for gas in manholes and may have to empty water and other debris from manholes.
* Dismantle, move or remove aerial, underground or building wire, cable, associated equipment and hardware.
* Load required tools and materials on boom trucks, center mounts, companion trucks, and pick-ups and drive to work location.
* Read and interpret cut sheets and work order prints in order to complete work assignments
* Keep detailed written record of work activity.
* This work requires frequent pushing, pulling, and lifting of moderate to heavy weight objects throughout the workday.
* May be required to perform additional duties and tasks as required by the Company.
Basic Qualifications
* Tests - Results obtained in standard tests for this position must meet minimum requirements established by the Company, in accordance with Company policy.
* Experience - Management will designate the experience level required for each vacancy.
* First consideration will be given to an individual who in the last ten years has successfully held the position of Line Worker, OSP Construction Installer/Splicer or Plant Construction Installer, or who possesses the equivalent experience (i.e., other telecommunications company experience).
* Second consideration will be given to an individual who in the last ten years has successfully held the position of Cable Splicer, Communications Specialist, Customer Service Technician I, Customer Service Technician II, Customer Service Technician III, Fiber Network Field Technician, Internal Communications Technician, Public Access Sales Technician, Collector/Maintainer, Public Communications Field Technician, Senior Communications Specialist or Special Equipment Installer, or who possesses the equivalent experience (i.e., other telecommunications company experience).
* If there are no individuals who meet the criteria outlined above, consideration will be given to all other individuals.
* Must possess, at time of appointment, a valid California class "C" driver's license, and if required at the assigned job site, must demonstrate proficiency in the operation of a vehicle equipped with standard (manual shift) transmission. Individuals will be required to obtain a valid California Class "A" driver's license, after appointment, to meet vehicle or equipment operation requirements. (Class "A" drivers will be subject to random drug tests in accordance with the Department of Transportation (DOT) regulations).
* Legally required Criminal Records Check - Employee will be required to be fingerprinted and pass the Department of Justice criminal records screening process in order to ensure that the employee has never been convicted of, and is not the defendant in a pending criminal proceeding with respect to an arrest for, any "serious" or "violent" felony (as defined in the California Education and Penal Codes). The Department of Justice will continuously monitor the employee's criminal record while the employee is employed in this position, and the employee shall be required to pass such continuous screening in order to retain this position.
* Must possess the ability to perceive difference in colors.
* Must possess the ability to distinguish audible tones/levels.
We are deeply committed to attracting talented team members in the US from all backgrounds regardless of race, age, gender, ethnicity, religion, sexual orientation, disability status, or nationality. However, at this time, we are not sponsoring any Visas.
Frontier Communications is an Affirmative Action and Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability.
Assembly Line Worker (Part-Time)
Assembly Line Worker Job In Los Angeles, CA
Second Spectrum is a Sports Emmy-winning data & tech company that is building the next way of seeing sports - by capturing and producing the highest quality data and innovative content for many of the world's largest leagues and media partners, such as the NFL, NBA, English Premier League, ESPN, Amazon, and CBS Sports.
We are pushing the boundaries of deep tech -- machine learning, computer vision, big data, augmented and virtual reality. We deliver unique and innovative products with a magic formula of cutting-edge technology, creative design, and hands-on experience playing and analyzing college and professional sports. These products have helped Second Spectrum partners to multiple NBA championships, to win matches on football pitches around the world, and to entertain and educate millions of fans on TV and digital. In 2021, Second Spectrum was acquired by Genius Sports, bringing together a unique combination of technological, operational and commercial capabilities.
We believe that technology will revolutionize the way that sports are played, coached, and experienced. We're just getting started turning our joint vision of transformative sports technologies into reality.
Second Spectrum is the place to work on cutting edge technology in sports, alongside incredibly driven and ambitious teammates. Our innovative and dynamic environment emphasizes opportunities for motivated individuals to maximize their growth and impact.
The Role - Assembly Line Worker (Part-Time)
For our next generation tracking system, Dragon, the edge units will be housed in custom enclosures to be produced and assembled by an internal group. This group is also responsible for scheduling and managing the people that do assembly work and ensuring the proper supply of components is available to meet the assembly line production schedule.
The Assembly Line Worker will be responsible for assembling enclosures and parts on the production line and verifying that all parts and components are assembled correctly and in a timely manner under direction of a supervisor. Assembly will be done using your hands and tools requiring adequate precision and dexterity.
This role is a part-time position based in our L.A office. The hourly pay for this role is $18/hour and you can expect approximately 30 hours per week. A number of factors influence the specific offer, including seniority, and relevant educational and working experience.
Specifically, you can expect to:
* Follow verbal and written instructions in order to assemble components and products
* Ensure the quality of parts and components used in the assembly process
* Report any problems during assembly to supervisors
* Test finished products for defects
* Inventory parts and tools used in the assembly process
* Maintain a clean and safe work area
Minimum Qualifications
* Good mechanical acumen, be familiar with common hand tools and best practices for using them
* Comfortable with programming and testing PCBAs (printed circuit board assemblies)
* Able to read and interpret instructional documents
* Can handle repetitive tasks
* Good communication and interpersonal skills
* Attention to detail and accuracy
* Ability to solder is a plus
Preferred Qualifications
* 1+ years of experience as a member of an assembly line or similar process
Second Spectrum, part of Genius Sports Group, is proud to be an equal opportunity employer. We recognize and celebrate the benefits that a diverse and inclusive workforce bring to our business, our customers, and our staff. We welcome and will consider all applications regardless of age, different abilities or disability, gender identity or re-assignment, marriage, pregnancy, maternity, race or nationality, religion or belief, sex and sexual orientation (and any other applicable status). Please let us know when you apply if you need any assistance during the recruiting process due to a disability.
Assembly Line Worker (Part-Time)
Assembly Line Worker Job In Los Angeles, CA
Second Spectrum is a Sports Emmy-winning data & tech company that is building the next way of seeing sports - by capturing and producing the highest quality data and innovative content for many of the world's largest leagues and media partners, such as the NFL, NBA, English Premier League, ESPN, Amazon, and CBS Sports.
We are pushing the boundaries of deep tech -- machine learning, computer vision, big data, augmented and virtual reality. We deliver unique and innovative products with a magic formula of cutting-edge technology, creative design, and hands-on experience playing and analyzing college and professional sports. These products have helped Second Spectrum partners to multiple NBA championships, to win matches on football pitches around the world, and to entertain and educate millions of fans on TV and digital. In 2021, Second Spectrum was acquired by Genius Sports, bringing together a unique combination of technological, operational and commercial capabilities.
We believe that technology will revolutionize the way that sports are played, coached, and experienced. We're just getting started turning our joint vision of transformative sports technologies into reality.
Second Spectrum is the place to work on cutting edge technology in sports, alongside incredibly driven and ambitious teammates. Our innovative and dynamic environment emphasizes opportunities for motivated individuals to maximize their growth and impact.
The Role - Assembly Line Worker (Part-Time)
For our next generation tracking system, Dragon, the edge units will be housed in custom enclosures to be produced and assembled by an internal group. This group is also responsible for scheduling and managing the people that do assembly work and ensuring the proper supply of components is available to meet the assembly line production schedule.
The Assembly Line Worker will be responsible for assembling enclosures and parts on the production line and verifying that all parts and components are assembled correctly and in a timely manner under direction of a supervisor. Assembly will be done using your hands and tools requiring adequate precision and dexterity.
This role is a part-time position based in our L.A office. The hourly pay for this role is $18/hour and you can expect approximately 30 hours per week. A number of factors influence the specific offer, including seniority, and relevant educational and working experience.
Specifically, you can expect to:
Follow verbal and written instructions in order to assemble components and products
Ensure the quality of parts and components used in the assembly process
Report any problems during assembly to supervisors
Test finished products for defects
Inventory parts and tools used in the assembly process
Maintain a clean and safe work area
Minimum Qualifications
Good mechanical acumen, be familiar with common hand tools and best practices for using them
Comfortable with programming and testing PCBAs (printed circuit board assemblies)
Able to read and interpret instructional documents
Can handle repetitive tasks
Good communication and interpersonal skills
Attention to detail and accuracy
Ability to solder is a plus
Preferred Qualifications
1+ years of experience as a member of an assembly line or similar process
Second Spectrum, part of Genius Sports Group, is proud to be an equal opportunity employer. We recognize and celebrate the benefits that a diverse and inclusive workforce bring to our business, our customers, and our staff. We welcome and will consider all applications regardless of age, different abilities or disability, gender identity or re-assignment, marriage, pregnancy, maternity, race or nationality, religion or belief, sex and sexual orientation (and any other applicable status). Please let us know when you apply if you need any assistance during the recruiting process due to a disability.
Wire Harness Assembly Operator
Assembly Line Worker Job In Los Angeles, CA
The Cable Assembly Operator fabricates cables and harness assemblies. Capable of reading and interpreting manufacturing and production work instructions. Maintains up to date information on production specifications in determining type, size of cables, quantity, and finished dimensions with sequence of building operations.
Responsible for:
Builds cable/wire harness based on simple Work Instructions (WI), drawings and other written instructions.
Completes all tasks in accordance with current Celltron Process Procedures (CPP)
Strip and Crimp Wires according to IPC Standard 620B.
Capable of utilizing basic hand tools, able to read 6” scale and measure accurately.
Executes proper pin insertion and retention.
Competent in the use of tension puller and other basic test tools.
Complete correct jacket prepping per instructions.
Understands the basic procedures in Tinning, Lap, Lug, and Tack soldering.
Presents legible, accurate records using the Daily Production Output (Form-934A) to the Supervisor.
Provides legible, accurate records of production material accountability (scrap) to the Supervisor.
Report any deficiencies of equipment or materials to the Lead or Supervisor.
Know what to do when responding to emergency alarms and situations following established safety procedures.
Maintain a clean, safe and cohesive working environment, clean work area daily.
Work in cooperation with other Celltron employees promoting teamwork concept.
Perform other duties and assignments as required.
Qualifications:
Basic knowledge of cable fabrication (Military cable fabrication a plus)
Understanding of wire descriptions, codes and designations
Capable of basic math functions to determine wire length and equipment setup to minimize scrap
Understanding basic hand tool use, specifically reading tape measures and scales
7am-3:30 pm Monday-Friday
Full time 40 hours
ACE Production Worker
Assembly Line Worker Job In Gardena, CA
When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation's premiere propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States.
Assembly Line Worker
Assembly Line Worker Job In Compton, CA
Shift Time:
We have several shifts, send me your resume to get the shift timings.
We are seeking a dedicated Assembler I to join our team in assembling fiber, filtration, and medical device components. Responsibilities include manual and automated assembly, device testing, packaging, and maintaining quality standards. This role follows detailed work instructions and operates under the guidance of senior assemblers and supervisors.
Requirements:
High School Diploma or equivalent.
0-1 year of manufacturing/assembly experience (medical device experience preferred).
Ability to lift up to 10- 50 lbs and work in a cleanroom environment.
Assembler/Inspector
Assembly Line Worker Job In East Rancho Dominguez, CA
Packages bearings for shipment, upon completion of cleaning and lubrication, following customer or military specifications and/ or in-house requirements, , including, the use of preservatives and the proper making of bearings and containers specified.
Incumbent is responsible for cleaning the area s/he is working in before completing the shift and/or prior to moving to another area for proper housekeeping.
Knowledge/Skills/Abilities:
Competency in reading and comprehending simple instructions and in reading short memos. Ability to write simple correspondence. Capability to effectively present information in a one-on-one or small group situation to customers, clients, and other employee's of the organization.
Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Capable of computing rate, ratio, and percent and to draw and interpret bar graphs.
Ability to apply a common sense understanding to carry out simple one or two step
instructions. Ability to deal with standardized situations with only occasional or
no variables.
Special Requirements:
Overtime may be required, including weekends.
MIN: $17.00 to $19.00
**Please note that the salary range information is only applicable to California. This range is the company's good faith and reasonable estimate of the compensation for this role based on the position's responsibilities, qualifications, experience, and other relevant factors. Actual compensation may vary depending on the selected candidate's specific experience, education, skills, and other relevant factors.
Equal Opportunity Employer
RBC Bearings, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, disability, or veteran status.
This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a US citizen, lawful permanent resident [“green card” holders] or have refugee or asylee status.
Assembler II
Assembly Line Worker Job In Irvine, CA
Filled Inari Medical is an Equal Opportunity/Affirmative Action employer including protected Veterans and individuals with disabilities. Know your Rights: Workplace Discrimination is Illegal Poster Disability accommodation for employment applicants Family and Medical Leave Act (FMLA)
Pay Transparency Notice
E/M Assembler
Assembly Line Worker Job In Irvine, CA
We're looking for candidates with 5+ years of experience.
Assembling a variety of testers, rack assemblies, cables and harnesses along with various other mechanical assemblies
Candidates must know how to do splicing with solder sleeves.
Constructing cables/harnesses from schematic
25 - 100 cables in a bundle
Wiring diagrams, including pulling cables through braiding and tubing; crimp contacts to connectors; splice wires.
Constructing Interface Test Adapters (ITAs) including all internal wiring and PCBs using schematics diagrams
Wiring prototype PCBs from schematics
Installing and soldering components onto PCBs
Reworking CCAs
Constructing rack systems and portable testers including mechanical assembly and wiring
Constructing mechanical assemblies from Manufacturer Assembly Instructions (MAI).
Additional tasks assigned by Area Manager and/or Program/Project Manager
Qualifications:
AS or equivalent experience preferred
5+ years of experience working in electro-mechanical Environment including:
building prototypes
constructing military cables/harnesses for ATE
reading schematics, wire lists, blueprints, mechanical assembly, fabrication drawings
following verbal assembly instructions
assembly and wiring of test systems
Utilizing tools such as torque wrenches, solder irons, continuity testers, calipers, pin extraction tools, Wire crimpers, riveting tools
Soldering skills with thru-hole and SMT components
IPC-A610, IPC/WHMA-A-620 a MUST
Assembler IV
Assembly Line Worker Job In Burbank, CA
Assembler IV BH Job ID: 2080 SF Job Req ID: 12726 Assembler IV - 1st Shift Monday - Friday 6:00am - 2:30pm Pay Starts at $24/hr. based on experience! About Us: Haskel is a High-Pressure Technology Solutions. We specialize in Air-Driven Liquid Pumps, Air-Driven Refrigerant Pumps, Hydraulic Drive Compressors, Gas Booster Compressor System, BuTech High-Pressure Valves and Hydrogen Valves Fitting and Tubing.
Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to Making Life Better for our employees, customers, shareholders, and planet. Customers lean on us for exceptional performance and durability in mission-critical flow creation and life science and industrial solutions. Supported by over 80+ respected brands, our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity, and efficiency. For more information, visit *************
Job Overview:
Assemble, fabricate, and test mechanical parts, pieces or products using a variety of tools and equipment according to required specifications in a specific area of a production line in a manufacturing organization. Has knowledge of commonly used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job.
Responsibilities:
* Read, interpret and follow blueprints, diagrams, engineering drawings, specifications, bills of materials, and other written instructions or procedures to accurately assemble equipment(s) and products.
* Utilize manual tools and pneumatic tools.
* Maintain inventory of product in work stations.
* Perform quality work checks to insure the product meets quality standards.
* Identify product defects and complete appropriate documentation when defects are identified.
* Rework and/or repair assembled equipment and products according to engineering specification changes.
* Perform all work in accordance with quality standards and established safety procedures.
* Maintain cleanliness (5S) of work area daily
* Participate in continuous improvement goals of the work site
Requirements:
* 3+ years' experience in assembly
* Meeting Production quotas
* History of quality of assembly
* Ability to use various power (Pneumatic) hand tools (i.e.; power screwdriver, socket etc.)
* Ability to understand blueprints.
Core Competencies:
* Ability to read and comprehend simple instructions.
* Capable of working in a fast-paced environment
* Good Attendance
* Computer literate
* Professional Attitude and Teamwork
Preferences:
* High School Diploma or equivalent preferred
Travel & Work Arrangements/Requirements:
* This position will be fully based on site based
* Must be Willing to work Overtime
The starting pay is $24. This position is eligible for the LIP (Local Incentive Plan) of up to 4%.?The pay range takes into account a wide range of factors that are considered in making compensation decisions including, but not limited to, skills; experience and training; licensure and certifications; and other business and organizational needs. The disclosed pay range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At Ingersoll Rand, it is not typical for an individual to be hired at or near the top of the pay range for their role and compensation, decisions are dependent on the facts and circumstances of each case.
At Ingersoll Rand, we think and act like owners - of our business, our communities, our planet, and our health too. The Ingersoll Rand benefits program provides you with the tools and resources to take accountability for your health so that we can continue to help make life better.
What we Offer:
At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond.
Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations, and ordinances.
Assembler I
Assembly Line Worker Job In Orange, CA
Boldly innovating to create trusted solutions that detect, predict, and prevent disease.
Discover your power to innovate while making a difference in patients' lives.
iRhythm is advancing cardiac care…Join Us Now!
At iRhythm, we are dedicated, self-motivated, and driven to do the right thing for our patients, clinicians, and coworkers. Our leadership is focused and committed to iRhythm's employees and the mission of the company. We are better together, embrace change and help one another. We are Thinking Bigger and Moving Faster.
About This Role
iRhythm is currently seeking an experienced Assembler n our Cypress CA location.
Our production environment is fast paced, with a collaborative atmosphere. Most of all, we are passionate about delivering innovations that improve the quality of health care and the patient experience. We are looking for like-minded individuals to join our team today!
Specific job responsibilities include:
Follow HIPAA, ISO 13485, Joint Commission, and OSHA standards
Follow all Work Instructions, SOP's and safety requirements
Comply with IRhythm's policy, procedures, and quality standards, and safety and environmental regulations
Ability to work in a fast paced environment
Ability to read, write and communicate in English
High attention to detail
Look for continuous improvements opportunities
Ability to work towards a high-quality standard
Communicates any stoppages on the line to the lead
Perform routine minor maintenance
Familiar with or ability to learn proper Electrostatic Discharge Sensitive (ESD) handling processes & procedures
Keep a clean and well-maintained workspace
0%-25% completed of level 1 of production training Matrix
Ability to sit and stand for long periods of time during a full shift
Soft Skills:
Teamwork
Dependability and reliability
Accountability
Experience:
Minimum 0 -2 years related experience - in a medical device, manufacturing or ISO registered
High School Diploma/ GED preferred but not required
What's in it for you:
This is a full-time position with competitive compensation package, excellent benefits including medical, dental, and vision insurance (all of which start on your first day), paid holidays, and PTO!
iRhythm also provides additional benefits including 401K (with company match), an Employee Stock Purchase Plan, paid parental leave, pet insurance discount, Cultural Committee/Charity events, and so much more!
FLSA Status: Non-exempt
#LI-JR1
As a part of our core values, we ensure a diverse and inclusive workforce. We welcome and celebrate people of all backgrounds, experiences, skills, and perspectives. iRhythm Technologies, Inc. is an Equal Opportunity Employer (M/F/V/D). Pursuant to San Francisco Fair Chance Ordinance, we will consider for employment all qualified applicants with arrest and conviction records.
Make iRhythm your path forward.
Actual compensation may vary depending on job-related factors including knowledge, skills, experience, and work location.
Estimated Pay Range$18-$18 USD
As a part of our core values, we ensure a diverse and inclusive workforce. We welcome and celebrate people of all backgrounds, experiences, skills, and perspectives. iRhythm Technologies, Inc. is an Equal Opportunity Employer. We will consider for employment all qualified applicants with arrest and conviction records in accordance with all applicable laws.
iRhythm provides reasonable accommodations for qualified individuals with disabilities in job application procedures, including those who may have any difficulty using our online system. If you need such an accommodation, you may contact us at *********************
About iRhythm Technologies
iRhythm is a leading digital healthcare company that creates trusted solutions that detect, predict, and prevent disease. Combining wearable biosensors and cloud-based data analytics with powerful proprietary algorithms, iRhythm distills data from millions of heartbeats into clinically actionable information. Through a relentless focus on patient care, iRhythm's vision is to deliver better data, better insights, and better health for all.
Make iRhythm your path forward. Zio, the heart monitor that changed the game.
Communications Tower and Line Worker
Assembly Line Worker Job In Downey, CA
The Communications Tower and Line Worker (CTLW) works under the direction of a Communications Tower and Line Supervisor or user agency personnel and are characterized by their work at heights on steel communications towers. This classification installs, alters, maintains, and repairs communication antennas. They will regularly lift tools, supplies, and equipment exceeding 50 pounds, climb steel towers up to 200 feet tall, use lineman gaffs to climb utility poles, and perform tasks that require lifting, reaching, pulling, and bending. The CTLW will install, alter, maintain, and repair communications antennas, including microwave dish antennas with radomes and associated antenna feeds; fabricate and assemble cable raceway and antenna mounting hardware; perform structural maintenance of tall steel towers and occasionally erect monopoles; install, maintain and repair telephone poles, crossarms, pole fixtures, and guy wires; and trim trees around the communication sites, equipment and communication lines. The CTLW will perform rigging and lifting using utility line trucks and equipment; operate a forklift and other material-handling equipment; operate utility line truck booms, attachments and winches for aerial access, auguring, lifting, and pole setting; drive automotive equipment, including vehicles exceeding 26,000 pounds GVWR, to and from work sites; and tow trailers and pole dollies as required. The CTLW will possess knowledge of the protocols, procedures, techniques and equipment used to install, alter, maintain and repair communications antennas, and copper and fiber-optic lines, cables and related accessories. They will have the knowledge to exercise safe work practices in rigging, working at heights on microwave communications towers and utility poles, and in manholes and other below-grade confined spaces. They will possess a high degree of attention to detail and safety procedures to prevent injury to themselves and others. They will possess knowledge and experience in customer services; interpersonal skills; decision making; organization awareness; problem solving; oral communication; and ability to troubleshoot issues.
Experience Required:
Three (3) years of experience in the installation, alteration, maintenance and repair of outside overhead communications or power lines and equipment, with one (1) year at the journey-level.
Education Required: Completion of at least three (3) years in a recognized telephone or power line worker apprentice training program
a current and valid OSHA approved Competent Climber / Rescuer Certification, and a valid class B driver's license.
Physical dexterity, color perception, and visual acuity are required to perform essential job-related functions effectively and safely. Additional qualifying experience may be substituted for the required education on a year-for-year basis.
The Competent Climber / Rescuer Certification and class B driver's license are required and may not be substituted with additional experience.
Additional Information May be assigned a company vehicle or be partnered in a pool vehicle. Ride-a-longs for the first couple of months regarding training. 100% onsite, in the field. Will be in their seat, in the "yard" by 6:30am every morning, working on a 4-10 system, with Fridays off. The reporting location is: Pacoima, CA 91331 Tools will be assigned and released from the county. At the conclusion of the project, they will need to return to the County. Consultant/Qualified Vendors will be responsible to replenish any missing tools. Will be assigned a company laptop/device(s) Must have California, Commercial Driver's License
Line Worker
Assembly Line Worker Job In Chino, CA
Essential Functions
Ziegenfelder Production Staff are responsible for: Placing sealed individual units in packaging and ensuring proper package sealing. Repackaging improperly sealed, or coded, product. Disposing of scrap product and raw materials.
Keeping work area clean.
Ensuring compliance with all federal, state, local, and Ziegenfelder environmental, health, and safety
directives, policies, and procedures.
Qualifications and Education Requirements
Food service and/or production experience preferred.
High school diploma/GED or equivalent experience.
Physical Abilities
Standing up to 8 hours per day.
Moving and lifting objects weighing up to 50 lbs. regularly.
Bending, twisting, reaching, and grasping actions.
Good spatial awareness working around manufacturing equipment.
Working Conditions
May be subject to noise above 85 decibels with proper protection equipment.
Who We Are
The Armstrong Group is a family owned and operated collection of diverse companies. What began in 1946 as Armstrong County Line Construction, founded by Jud L. Sedwick in Kittanning, PA, has now grown into an organization that encompasses multiple industries and employs over 2,400 individuals nationwide. Our brands include Armstrong Utilities, Guardian Protection, Armstrong Development, 4Front Solutions, Twin Pops, and Armstrong Comfort Solutions.
Armstrong is an Equal Opportunity Employer.
Production Worker - Assembler
Assembly Line Worker Job In Rancho Cucamonga, CA
Are you a hands-on problem solver with an eye for detail and a passion for quality craftsmanship? Do you want to be part of a team that manufactures high-quality products for a trusted name in the industry? If so, we'd love for you to join the RiteScreen team as an Assembler! This role is located in Rancho Cucamonga, CA.
About the Role
As an Assembler at RiteScreen, you'll be a vital part of our production process, using hand tools and pneumatic equipment to construct metal screen frames based on customer specifications. Your contributions will help ensure our products meet the high standards that make RiteScreen a leader in the industry while fostering an efficient, safe, and collaborative work environment.
What You'll Do
Assembly & Tool Operation
Use hand tools and pneumatic equipment, such as staking machines, to construct screen frames to specifications and customer requirements.
Periodically inspect completed products to ensure they meet quality and consistency standards.
Maintain a steady flow of materials and products between production stages.
Quality Assurance
Monitor the production process for inconsistencies and report concerns to your supervisor promptly.
Identify and resolve minor production issues and escalate more significant problems as needed.
Maintenance
Keep tools, equipment, and workstations in good working order to support smooth operations.
Alert materials handlers when supplies or replacements are required to minimize downtime.
Safety and Collaboration
Adhere to all RiteScreen safety protocols, including PPE guidelines, and participate in ongoing safety training.
Follow 5S principles daily to maintain a clean, organized, and efficient workspace.
Collaborate with your teammates, cross-train in other areas, and communicate effectively to enhance productivity and versatility.
What We're Looking For
Required Skills and Qualifications
High School diploma or equivalent.
2+ years of related experience, or an equivalent combination of education and experience.
Strong problem-solving abilities and attention to detail.
Ability to follow instructions and respond to management direction.
Effective verbal communication skills and the ability to work collaboratively as part of a team.
Physical Demands
Stand frequently and perform repetitive tasks in a steady-paced environment.
Move about the facility to access products and machinery.
Lift and move up to 25 pounds frequently and occasionally up to 50 pounds with assistance.
Utilize manual dexterity and excellent hand-eye coordination to assemble products and operate machinery.
Why Join RiteScreen?
At RiteScreen, we are proud to be the nation's largest supplier of screen solutions for windows and doors. As part of our team, you'll enjoy:
Comprehensive Benefits Package: Including medical, dental, and vision insurance and more!
Retirement Savings Plan: With company contributions to help secure your future.
Paid Time Off: Generous PTO policy to help you maintain a healthy work-life balance.
Professional Development Opportunities: Training and cross-training to enhance your skills and career growth.
Collaborative Work Environment: Work alongside a team committed to innovation, efficiency, and excellence.
Apply Today!
If you're ready to take the next step in your career and contribute to RiteScreen's success, we encourage you to apply! Join us in building high-quality products and supporting a strong workplace culture.
RiteScreen is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive workplace for all employees.
Assembly Line Operator
Assembly Line Worker Job In Huntington Beach, CA
Our client, a leader in the light industrial sector, is seeking an Assembly Line Operator to join their team. As an Assembly Line Operator, you will be part of the manufacturing department supporting the production of high-quality autoglass. The ideal candidate will have strong attention to detail, excellent teamwork skills, and a commitment to safety, which will align successfully in the organization.
**Job Title:** Assembly Line Operator
**Location:** Huntington Beach, CA
**Pay Range:** $16.50 per hour
**What's the Job?**
+ Operate and maintain various types of manufacturing equipment and hand tools efficiently.
+ Ensure compliance with all safety, quality, and housekeeping standards.
+ Participate in the assembly process of autoglass products.
+ Work collaboratively with team members to meet production goals.
+ Maintain a clean and organized workspace following 5S principles.
**What's Needed?**
+ Ability to lift up to 50 lbs.
+ 1 year of experience in manufacturing preferred.
+ Strong commitment to safety and quality standards.
+ Willingness to work in a fast-paced environment.
+ Ability to pass all required screenings prior to starting.
**What's in it for me?**
+ Opportunity to work in a dynamic and supportive environment.
+ Gain valuable experience in the manufacturing industry.
+ Be part of a team dedicated to producing high-quality products.
+ Engage in a role with clear responsibilities and expectations.
+ Contribute to a company that values safety and quality in its operations.
If this is a role that interests you and you'd like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you!
**About ManpowerGroup, Parent Company of: Manpower, Experis, Talent Solutions, and Jefferson Wells**
_ManpowerGroup (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands -_ **_Manpower, Experis, Talent Solutions, and Jefferson Wells_** _-_ creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2023 ManpowerGroup was named one of the World's Most Ethical Companies for the 14th year - all confirming our position as the brand of choice for in-demand talent.
Nuestro cliente, un líder en el sector industrial ligero, está buscando un Operador de Línea de Ensamblaje para unirse a su equipo. Como Operador de Línea de Ensamblaje, serás parte del departamento de manufactura apoyando la producción de autoglass de alta calidad. El candidato ideal tendrá una gran atención al detalle, excelentes habilidades de trabajo en equipo y un compromiso con la seguridad, lo que se alineará exitosamente con la organización.
**Título del Trabajo:** Operador de Línea de Ensamblaje
**Ubicación:** Huntington Beach, CA
**Rango Salarial:** $16.50 por hora
** Cuál es el Trabajo?**
+ Operar y mantener varios tipos de equipos de manufactura y herramientas manuales de manera eficiente.
+ Asegurar el cumplimiento de todas las normas de seguridad, calidad y limpieza.
+ Participar en el proceso de ensamblaje de productos de autoglass.
+ Trabajar de manera colaborativa con los miembros del equipo para cumplir con los objetivos de producción.
+ Mantener un espacio de trabajo limpio y organizado siguiendo los principios de 5S.
** Qué se Necesita?**
+ Capacidad para levantar hasta 50 lbs.
+ 1 año de experiencia en manufactura preferido.
+ Fuerte compromiso con las normas de seguridad y calidad.
+ Disposición para trabajar en un entorno de ritmo rápido.
+ Capacidad para pasar todas las pruebas requeridas antes de comenzar.
** Qué hay para mí?**
+ Oportunidad de trabajar en un entorno dinámico y de apoyo.
+ Obtener experiencia valiosa en la industria de manufactura.
+ Ser parte de un equipo dedicado a producir productos de alta calidad.
+ Participar en un rol con responsabilidades y expectativas claras.
+ Contribuir a una empresa que valora la seguridad y la calidad en sus operaciones.
Si este es un rol que te interesa y te gustaría saber más, haz clic en aplicar ahora y un reclutador se pondrá en contacto contigo para discutir esta gran oportunidad. ¡Esperamos hablar contigo!
**Acerca de ManpowerGroup, Empresa Matriz de: Manpower, Experis, Talent Solutions, y Jefferson Wells**
_ManpowerGroup (NYSE: MAN), la principal compañía global de soluciones de fuerza laboral, ayuda a las organizaciones a transformarse en un mundo del trabajo que cambia rápidamente al buscar, evaluar, desarrollar y gestionar el talento que les permite ganar. Desarrollamos soluciones innovadoras para cientos de miles de organizaciones cada año, proporcionándoles talento calificado mientras encontramos empleos significativos y sostenibles para millones de personas en una amplia gama de industrias y habilidades. Nuestra familia de marcas expertas -_ **_Manpower, Experis, Talent Solutions, y Jefferson Wells_** _-_ crea un valor sustancial para candidatos y clientes en más de 75 países y territorios, y lo ha hecho durante más de 70 años. Somos reconocidos consistentemente por nuestra diversidad - como uno de los mejores lugares para trabajar para Mujeres, Inclusión, Igualdad y Discapacidad, y en 2023 ManpowerGroup fue nombrada una de las Compañías Más Éticas del Mundo por el 14º año - lo que confirma nuestra posición como la marca de preferencia para el talento más demandado.
ManpowerGroup is committed to providing equal employment opportunities in a professional, high quality work environment. It is the policy of ManpowerGroup and all of its subsidiaries to recruit, train, promote, transfer, pay and take all employment actions without regard to an employee's race, color, national origin, ancestry, sex, sexual orientation, gender identity, genetic information, religion, age, disability, protected veteran status, or any other basis protected by applicable law.
THRIFT STORE FLOOR PRODUCTION WORKER
Assembly Line Worker Job In Torrance, CA
Requirements
THRIFT STORE FLOOR PRODUCTION WORKER EXPERIENCE/ EDUCATION/LICENSURES/CERTIFICATIONS:
High school diploma or equivalent, required.
Thrift store, retail store, warehouse, assembly line or restaurant experience, a plus.
THRIFT STORE FLOOR PRODUCTION WORKER KNOWLEDGE/ SKILLS/ ABILITIES:
Fluency in Spanish, both verbal and written, a plus.
Ability to demonstrate a strong work ethic.
Perform in a fast-paced environment and possess strong organizational skills.
Ability to determine the value of donations.
Must exhibit strong customer service skills.
Clear communication skills, both written and oral.
Excellent time management skills and detail oriented.
Ability to multi-task in a high-volume environment.
Must be an effective team member.
Must be able to work a flexible schedule, including weekends.
#ZR
Salary Description $17.28 - $19.40 (depending on experience)