Explore jobs
Find specific jobs
Explore careers
Explore professions
Best companies
Explore companies
Assembly line worker jobs in Erie, PA - 1,640 jobs
All
Assembly Line Worker
Assembler
Production Worker
Computer Assembler
Assembly Worker
Assembly Technician
Production Line
Wire Harness Assembler
Production Assembler
Assembly Operator
Assembler
Ametek, Inc.
Assembly line worker job in Woodstock, NY
The Assembler - Fan, Blower and Modules will enable company success by performing duties to assemble, inspect, and solder variety of designs and sizes of fractional horsepower fans, blowers, and modules, including assembly of electrical & mechanical subcomponents. The assembler will also read and interpret blueprints, position parts, and connections for the correct fit. 1st Shift - 7:00 AM to 3:30 PM What You Will Do In The Role: Read and interpret, routings, assembly drawings, workstation instructions, part lists and all applicable documentation. Validate all parts are present prior to beginning job and before moving job to the next step. Assemble final fan, blower & module products from electrical and mechanical subcomponents. Perform a wide range of tasks to assemble a fan, blower & module. Tasks include but not limited to: operation of equipment to assemble mechanical subcomponents (i.e. balancing operation) and magnetizing. Verify specifications and measurements per drawing. Measure parts using basic measuring tools (i.e. ruler, calipers). Basic math, algebra a plus for test (equipment set-up and comprehension). Inform team lead or supervisor of any assembly or production issues. Ensure workstation is clean and safe. Inform team lead of supplies and tooling needs as they arise. Maintain high quality. Meet company output expectations. Complete all in process inspection requirements. Read and interpret wiring diagrams and hook-up assemblies per drawing. Obtain and hold a solder certificate and complete yearly ESD training. Install stator lead wires, into PC board and housing, use tweezers, cutters, screw drivers. Follows all safety policies and procedures, including required PPE for the respective job being performed. Perform other related tasks as required by team lead, cell lead, or supervisor. Effectively manage your time What You Will Bring To The Role: A High School Diploma or GED. Good attention to detail. Excellent hand-eye coordination. Driven and self-motivated Empathetic and cares about team members Effective verbal and written communicator Flexible/adaptable in a changing environment Ability to take constructive feedback on opportunities / gaps in knowledge / skill set. Displays good judgement - quality & safety. Manufacturing experience a plus Soldering experience a plus Ability to learn and apply new skills. Must be able to read wiring diagrams and hook-up assemblies per drawing Must hold or obtain solder certificate and yearly ESD training Physical Requirements: Good eye/hand coordination Able to see close-up, detailed work Able to sit or stand for long periods of time Able to lift 50 lbs. Able to tolerate fumes Compensation Employee Type: Hourly Salary Minimum: $30,000 Salary Maximum: $40,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&P 500. Visit ************** for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call ****************. Nearest Major Market: Kingston$30k-40k yearly 3d agoAssembler
Belcan
Assembly line worker job in Olde West Chester, OH
Job Title: Assembler Zip Code: 45069 Pay Rate: $18.00-$22.00/hr DoE Keywords: #AssemblerJobs #ProductionSupportJobs JOB RESPONSIBILITIES: Solder various electronic components, wires and other electronic parts to designated locations on printed circuit boards to IPC regulations Assemble microcircuits requiring fine hand assembly with the use of microscopes Incorporation of engineering change to new and existing products at board level Record activity into a database Review ERP for proper configuration control specifications REQUIRED QUALIFICATIONS: Must be a US person (US Citizen or Permanent Resident (Green Card Holder) High school diploma or GED required 2+ years soldering experience preferred 2+ years related defense manufacturing experience preferred IPC-610 certification preferred Ability to pass and obtain an IPC-610 certification Basic mechanical skills Basic computer skills High level of attention to detail Ability to read blueprints Ability to interface effectively with internal customers and work closely with all levels of the organization. If you are interested in this role, please apply via the apply now link provided. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract, temporary, temp-to-hire, and direct assignments. We are the employer of choice for thousands worldwide. For more information, please visit our website at Belcan.com Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.$18-22 hourly 5d agoAssembler / Operator (SDKY) - 3rd Shift
U.S. Tsubaki Power Transmission, LLC
Assembly line worker job in Sandusky, OH
The TSUBAKI name is synonymous with excellence in quality, dependability and customer service. U.S. Tsubaki is a leading manufacturer and supplier of power transmission and motion control products. As a part of a vast, international network of corporate and industrial resources, Tsubaki offers its customers the finest state-of-the-art products available in the world and we strive to be the "Best Value" supplier in the industry. Essential Duties and Responsibilities: The essential duties and responsibilities of this job are included but not limited to this job description - other tasks may be assigned and expected to be performed. Performs setups and adjustments of machinery for assembling metal chain parts Interprets job specifications and reads blueprints. Inspects products to verify conformance utilizing various measuring devices. Assembles parts to product specifications per print. Maintains record keeping for jobs and inventory. Coordinates with others to achieve maximum throughput and meet department and company goals. Ensures compliance with OSHA regulations and workplace safety regulations. Operates material handling equipment including but not limited to forklifts, cranes and hoists. Uses good judgment and works in a safe responsible manner. Other tasks/functions as assigned. General knowledge and ability to safely use hand tools. Other tasks, functions and projects as assigned. Requirements: High school diploma or equivalent preferred; equivalent relevant experience may be considered 1 - 2 years manufacturing related experience. Ability to input to and retrieve from computer based software programs. Able to perform moderately active work typical of a manufacturing plant environment. Examples include pushing, pulling, lifting, standing, bending, twisting. Safety Sensitive position Exhibits required in-depth job knowledge and skills Able to solve problems and determine a course of action Troubleshoots and anticipates problems Has the ability to influence others in the work group in a positive manner Can prioritize the work and coordinate with others Fosters a team environment Supports complex customer's needs/requests Exhibits a sense of urgency to get the job done Understands, responds and supports fostering good employee relations Exhibits punctuality and dependability U.S. Tsubaki offers: A competitive compensation package, including health benefits effective on date of hire, generous 401(k) match and profit sharing, education reimbursement, and annual bonus potential Paid Time Off ("PTO") 90-day and 180-day performance reviews Shift differential pay for 2nd and 3rd shift Weekly bonus potential Paid training Shift: 4 days a week, 10 hours per day. Days: Monday - Thursday (standard schedule). Overtime may be required on Fridays/Saturdays according to business needs. Learn more about U.S. Tsubaki at: ************************* The estimated salary range is meant to reflect an anticipated salary range for the position. We may pay more or less than of the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on location, skills and expertise, experience, and other relevant factors. Tsubaki is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability PM21 PI8945f93b3bdf-37***********6$25k-32k yearly est. 5d agoFood Line Production
We Staff Better, LLC
Assembly line worker job in Newcomerstown, OH
Food Production Associates Schedule: Full-Time Monday Friday 6:45 AM 3:30 PM or 8:45 AM 5:30 PM Pay: Steady hourly rate with raises after hire Overtime Available Responsibilities Package and sort food products on the production line Clean equipment between production runs to maintain efficiency Monitor for safety and quality throughout the process Assist with general production tasks as needed Requirements Ability to lift, bend, and stand for the duration of the shift Reliable and punctual attendance Positive attitude and strong teamwork skills Work Environment Indoor, refrigerated setting (38 42 F) Monday through Friday schedule, 40 hours per week Two shift options: 6:45 AM 3:30 PM or 8:45 AM 5:30 PM Benefits Pay raises after hire Steady hours with overtime opportunities Supportive, team-oriented workplace$30k-36k yearly est. 8d agoASSEMBLER
Advantech Industries, Inc.
Assembly line worker job in Rochester, NY
Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are currently seeking an individual to collaborate with us as an Assembler. The Assembler is responsible for the assembly of product according to the project specifications, assisting with the final product preparation for delivery while visually inspecting parts and assembled pieces for defects. Successful candidates will possess: A HS Diploma or GED; 1-2 years of previous manufacturing experience; Ability to use an air gun, air drivers, other hand and power tools and a pallet truck; Alignment with the requirements and principles of the Advantech Quality Management System and ISO 9001:2015; Skills to operate assigned equipment safely and efficiently; Capacity to handle changes in business operations and adjust to new situations; Preparedness to sit for extended periods and manipulate items with dexterity; Ability to work with limited supervision. What we offer: Monday through Friday 7:30 am to 4:00 pm; Full time employment (39.75 hours per week); Medical (3 HDHP offered), Dental and Vision Plans Vacation, Paid Sick Leave and Company Paid Holidays Company Paid Life Insurance Optional Short-Term and Long-Term Disability Available 401k with Company Match According to the New York Pay Transparency law, pay range for this job is $18.00 - $27.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources. Monday through Friday 7:30 am to 4:00 pm Full time employment (39.75 hours per week)$18-27 hourly 7d agoAssembler
Ambrell
Assembly line worker job in Rochester, NY
Responsible for assembly of small or medium sized parts. Fitting and/or adjustment of interrelated parts and/or assembly. Adjustment and repair of subassemblies and major assemblies May involve mechanical, optical, and electrical/electronic operations. Responsible for inspection of own work and work of others. Utilize process detail, prints, bills of material, and cut lists to produce quality product. Maintain a safe and clean work environment. Requirements HS Diploma Requires use of wide range of hand and power tools, electrical or mechanical fixtures, standard measuring devices such as rulers and tape measures, drills, jigs, fixtures, and light materials. Ability to correct documentation when needed. Coordinate with engineering and purchasing when necessary. Incoming and Outgoing Inspections Salary Description $18.50 - $20 / hr$18.5-20 hourly 7d agoAssembler
Ambrell Corporation
Assembly line worker job in Rochester, NY
Responsible for assembly of small or medium sized parts. Fitting and/or adjustment of interrelated parts and/or assembly. Adjustment and repair of subassemblies and major assemblies. May involve mechanical, optical, and electrical/electronic operatio Assembler, Mechanical, Manufacturing$27k-34k yearly est. 7d agoAssembly Technician
Career Conceptions, Inc.
Assembly line worker job in Gibsonia, PA
If you are looking to grow or launch your career as an Assembly Technician, this opportunity is for you! Our client, a growing provider of industrial manufacturing equipment located in the Gibsonia, PA area is seeking an Assembly Technician. Job Responsibilities mainly consist of, but not limited to: Assemble company's products following work orders and BOMs Document serial numbers, cameras, and/or lights for APG Vision's products Work closely with computers while performing assembly tasks Load and unload laser machines Prepare products for packaging and shipment Communicates project status updates to management Documents red lines for the production manager/engineers Operate a forklift Completes projects and tasks assigned by management in a timely manner Performs all other duties as directed by the production manager and/or management Follow OSHA and UL requirements withing industry and APG Vision business standards during the development of new products Maintain a safe, clean, and organized working environment Other Requirements: Education: High school graduate/GED or equivalent work experience. Experience: Intermediate understanding and able to operate hand and power tools. Communication: Ability to read/write at a high school level. Ability to communicate with supervisors, co-workers, etc. Hourly compensation, full benefits and vacation will be offered. Apply today for immediate consideration for this exciting opportunity with a growing organization!$33k-41k yearly est. 2d agoAssembler Level 1P
Dexian
Assembly line worker job in Twinsburg, OH
Job Title: Assembler Duration: 01/26/2026 to 07/26/2026 Pay Rate: $17.00 - $19.00 Shift timing : 2nd Shift 3:30 pm- 1:30 am M_TH Monday-Thursday 5:30AM-3:30PM 2:30PM to 10:30PM Monday-Friday 3rd shift hours 10:30P-6:30A JOB SUMMARY Performs a wide variety of electronic or electro-mechanical assembly operations on assemblies or sub-assemblies. Determines and/or follows methods and sequence of operations in performing wiring, component installation, hand soldering and cable harnessing on assembly units. Makes setups and adjustments holding tolerances to blueprint specifications. Interacts daily with peers and customers (typically internal) to exchange or present factual information. Works on assignments that are routine in nature, requiring limited judgment. Has little or no role in decision-making. Receives predetermined assignments subject to moderate level of control and review. Normally receives detailed instructions on all work. Works under close supervision. Legal authorization to work in the US is required. Will not sponsor individuals for employment visas, now or in the future, for this job opening. Dexian stands at the forefront of Talent + Technology solutions with a presence spanning more than 70 locations worldwide and a team exceeding 10,000 professionals. As one of the largest technology and professional staffing companies and one of the largest minority-owned staffing companies in the United States, Dexian combines over 30 years of industry expertise with cutting-edge technologies to deliver comprehensive global services and support. Dexian connects the right talent and the right technology with the right organizations to deliver trajectory-changing results that help everyone achieve their ambitions and goals. To learn more, please visit ******************** Dexian is an Equal Opportunity Employer that recruits and hires qualified candidates without regard to race, religion, sex, sexual orientation, gender identity, age, national origin, ancestry, citizenship, disability, or veteran status.$17-19 hourly 2d agoAssembler A Shift
Adecco
Assembly line worker job in Rochester, NY
Adecco is currently seeking Mechanical Assemblers to support a leading manufacturer of monitoring and protection devices for high-value electrical assets. This position is located in Fairport, NY. Candidates should have prior experience in a manufacturing or mechanical assembly environment and be comfortable working in a quality-driven, detail-oriented setting. The Mechanical Assembler will be responsible for assembling, inspecting, and testing mechanical components and subassemblies used in monitoring and protection equipment. This role requires strong attention to detail, the ability to follow technical documentation, and a commitment to quality and safety standards. Responsibilities of the Mechanical Assembler: Assemble mechanical components and subassemblies using hand and power tools. Follow detailed work instructions, blueprints, schematics, and assembly drawings. Perform fastening, fitting, alignment, and adjustment of mechanical parts. Inspect finished assemblies to ensure conformance to quality and performance standards. Identify, troubleshoot, and correct minor mechanical assembly issues. Maintain a clean, organized, and safe work environment. Accurately record production and quality data. Adhere to all safety, quality, and manufacturing procedures. Requirements for the Mechanical Assembler: High school diploma or equivalent; technical or mechanical training preferred. Prior experience in mechanical assembly or manufacturing preferred. Ability to read and interpret blueprints, schematics, and technical documents. Proficiency with hand tools, power tools, and basic measuring instruments. Strong attention to detail and quality focus. Good manual dexterity and hand-eye coordination. Ability to work independently and collaboratively in a team environment. Strong communication and problem-solving skills. Click apply to be considered for this Mechanical Assembler opportunity in Fairport, NY! Pay Details: $18.50 to $21.50 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.$18.5-21.5 hourly 7d agoProduction Worker I
Bearon Manufacturing LLC
Assembly line worker job in Landisville, PA
Job Description Production Technician - 1st Shift Work Hours: 6:00 AM to 3:00 PM, Monday through Friday Competitive Compensation Make the Right Connection-Build Your Career with Dixon! Join the team at Bearon Manufacturing LLC, an affiliate of The Dixon Group, as a First Shift Production Technician! In this role, you'll play a key part in ensuring our high-quality metal components meet customer expectations across a variety of industries. You'll also have the opportunity to cross-train in other production positions, expanding your skills and versatility. We're looking for someone who is detail-oriented, takes pride in their work, and enjoys being part of a collaborative team. If that sounds like you, this is a great chance to grow your career in a supportive and dynamic manufacturing environment. About Us: The Dixon Group is a global, family-owned manufacturing company with a history of over 100 years of operation in the U.S.A. Based in Chestertown, Maryland, with distribution centers located worldwide. The company has a diverse workforce and a strong values-based culture. As an innovator in the hose coupling industry, our mission is to provide real solutions for our customers while fostering a supportive and collaborative work environment. At Bearon Manufacturing LLC, we value the contributions of our Military Veterans and proudly employ our nation's heroes. Veterans are strongly encouraged to apply. What You'll Do: Inspect precision metal parts to ensure they meet our high-quality standards Follow written instructions, procedures, and engineering prints Operate basic shop equipment and tools Maintain a clean and safe work environment Accurately complete required paperwork Support other roles within the production area as needed (cross-training provided) What We're Looking For: High school diploma or equivalent required 1-2 years of experience in a manufacturing setting Strong attention to detail and commitment to quality Mechanical aptitude and ability to work with tools and machines Ability to lift up to 50 lbs and stay physically active throughout your shift A self-starter who can follow instructions and stay on task with minimal supervision Strong team communication and willingness to support others Experience with part inspection, material handling, or machine operation What We Offer: Medical, dental, and vision insurance for you and your family Competitive salary Bonus programs 401K retirement plan Training opportunities Tuition reimbursement Paid vacation, PTO, and holidays Gym reimbursements, and more! Join us and be a part of a team that values your contributions and supports your goals! The Dixon Group is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices and laws. Accordingly, to the fullest extent required by applicable law, The Dixon Group strictly prohibits and does not tolerate discrimination against employees, applicants, or any other covered persons. The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law. To that end, personal information will be collected solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements. The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.g., in response to a lawful subpoena; mandatory tax reporting; etc.) Please contact us at ************** or ***************** if you need help to participate fully in the application process.$26k-33k yearly est. Easy Apply 5d agoProduction Worker
Jennmar
Assembly line worker job in South Point, OH
This is an hourly, entry-level production position where the employee is responsible for performing general production labor activities under the direction of a mentor employee that include various machine operation actions that may progress to a machine operator position. EDUCATIONAL/EXPERIENCE REQUIREMENTS: * HS/GED Preferred JOB REQUIREMENTS: * Dependability to be consistently at work and on time with the ability to work a flexible schedule that may include all shifts. * Basic reading and math skills including knowledge of fractions and decimals. * Basic measuring skills like using a tape measure. * Fundamental listening, verbal, and written communication skills. * Ability to follow safety procedures and guidelines throughout production processes. * A "team member" mentality with quality assurance mindset. * Repetitive standing, bending capability; near/far vision, manual dexterity, multiple limb coordination with moderate lifting capability (up to 65 lbs). RESPONSIBILITIES: * Perform daily inspection of work area to check for safety hazards. * Perform operator actions at a training-level capacity under the direction of a mentor employee as assigned by supervisory personnel following standard operating procedures and safety protocols. * Perform various general labor duties as assigned daily by supervisory personnel per standard operating procedures and safety protocols. * Perform work station and surrounding area housekeeping duties as required. Excellent benefits include medical with a standard PPO plan with deductibles as low as $1,500 and wellness credit up to $750; voluntary 401k plan with company match up to 12%; voluntary dental and vision plans; free telemedicine services; basic life and short term disability coverage.$29k-36k yearly est. 20d agoAssembly Worker - 1st shift
Sew-Eurodrive-USA
Assembly line worker job in Troy, OH
About the Role Position involves all aspects of the assembly processes including putting up inventory stock, parts pulling, assembling, repair/restock/warranty evaluations, testing and service, wash/prep/paint, packing, shipping /receiving and general clean up. The main focus of the position at this time is assembly of reducers and motors. Excellent mechanical aptitude and experience is required, including a background in hand assembly. Shift: 1st shift Pay Range: $17.00 - $19.00/hour Top 5 Skills we are seeking in an applicant: • Ability to perform all tasks listed above to the Company's expectations. • Must be currently eligible and authorized to work in the United States on an ongoing indefinite basis. • Ability to organize workload for timely accomplishment of work. • Must be able to occasionally sit, stand, walk, reach with hands and arms, push and pull, bend, twist, stoop, and kneel. • Must be able to continuously meet the Company's production requirements. Top 5 Tasks for this position: • Hand assembly of gear motors, reducers, and adjustable drives, maintain parts stock between assembly lines, putting up inventory stock, parts pulling, repair/restock/warranty evaluations, testing and service, wash/prep/paint, packing, shipping/receiving and general clean up. • Use calipers, depth and paint millage gauges. • Must visually inspect all work and rework as necessary. • Must comply with all current ISO Quality and Work Instructions for job, all Company Safety rules, and all other Company rules, policies and procedures. • Assess each situation and do not perform any tasks which s/he feels is unsafe, on which s/he has not received training, or engage in any unsafe work practices. Report any unsafe condition to his/her manager. Although we have described above what we are generally looking for, we are very likely missing other attributes and skills that may make you a great fit! Please tell us about your other skills and abilities by applying and listing your additional attributes. A 10% shift premium is paid for 2nd and 3rd shift positions. SEW-EURODRIVE provides a generous benefits package to all full time employee. These benefits start on DAY ONE! There is no monthly premium required for Employee's coverage: • Medical Insurance - Includes Medical, Dental, Vision, Audio, and Prescription Drug coverage + $125 annual reimbursement for purchase of eligible vitamins & minerals • Life Insurance worth 2.5 times annual base pay. Includes Accidental Death & Dismemberment • Disability - Includes both Short Term Disability and Long Term Disability • Flexible Spending Account (FSA) for Medical and/or Dependent Care Made available annually during open enrollment • Timely Evaluations with potential for a pay increase - New Employees are evaluated every six months for the first two years then annually thereafter • Paid Vacation - 2-weeks of vacation accrual per year to start, which increases after five years and ten years of service • Holiday Pay - Twelve (12) paid holidays per year • Retirement Benefits - Includes 401(k) with Profit Sharing Contribution and 200% Company Match on the first 3% that you defer to your 401K account • Additional Paid Time Off (PTO) for hourly positions - Unused time is paid out annually • Paid Parental Leave - To assist and support new parents with balancing work and family matters • Onsite Clinic Services - On location medical services by licensed providers at no cost to employees • Education Assistance Programs - Student Loan Repayment / Tuition Assistance options • Counseling Resources - Easy and convenient access to professional counseling services online • Wellness Resources - Utilizing a comprehensive, interactive, and personalized wellness program with potential to earn points for awards / gift cards • Uniforms and Subsidies - Uniforms (for shop employees) are provided and a subsidy for the annual purchase of safety shoes is included • Employee Assistance Programs - Five programs to help employees navigate challenging life circumstances • Insure Choice Plan Group Discounts - Auto, Home, Pet coverage, Legal insurance, and more at a group discount rate Additional job requirements and responsibilities would be discussed during the interview process.$17-19 hourly Auto-Apply 14d ago1st Assemblers Needed! 4 Day Work week! Hiring ASAP!! 833462
Alliance Industrial Solutions
Assembly line worker job in Orrville, OH
Join Our Team: Assembler in Orrville, OH - Urgently Hiring! Job Title: Assembler Pay: $20 - $22 per hour Hours: Monday - Thursday, 5:30 AM - 3:00 PM (Overtime available every other Friday) As an Assembler, you'll play a key role in the production of ventilation system products, ensuring quality and efficiency in your work. You'll collaborate closely with the assembly team to produce high-quality products that meet the company's standards. What You'll Do: As an Assembler, you will be responsible for: Assembling ventilation system products using various hand tools. Managing the complete assembly process, from initial build to testing and palletizing. Performing general cleaning of the production area to maintain a safe and organized work environment. Completing other duties as assigned to support team operations. What You'll Bring: The ideal candidate for this role will have: A high school diploma or equivalent. A minimum of 6 months of experience in a manufacturing environment, particularly in assembly. Physical capability to perform consistent lifting, bending, and standing in one area for 8-12 hours. The ability to regularly lift at least 50 pounds. Familiarity with power tools and hand tools. Why Join Us in Orrville? Enjoy flexible hours with opportunities for overtime. Benefit from competitive pay and a comprehensive benefits package. Experience a supportive team culture where your contributions are valued. Receive a $200 referral bonus for anyone you refer who works with us for 30 days (unlimited bonus opportunities). Location & Schedule: This position is on-site in Orrville, OH during 1st shift hours: Monday - Thursday from 5:30 AM - 3:00 PM, with overtime every other Friday. Ready to Take the Next Step? If you're ready to start a rewarding career as an Assembler in Orrville, apply today or contact our recruiting team to learn more. Don't wait, we're hiring now!$20-22 hourly 5d agoTRC - Production Worker
The Resource Center
Assembly line worker job in Jamestown, NY
FUNCTION: Sewing a variety of straps and pouches in different colors and lengths. SPECIFIC DUTIES: Level 1 Use a Commercial sewing machine to perform the following: Basic bench assembly, bar-tacking, stud/post machine, snap-cap machine, hot knife, trimming, material handling, simple machine operation MINIMUM QUALIFICATIONS: High school diploma or equivalent preferred. Basic working knowledge of sewing or production machinery desired, but not required. Factory production work experience desired. Must be able to follow instructions and shop rules.$26k-33k yearly est. 5d agoAssembler
Vertiv Holdings, LLC
Assembly line worker job in Corry, PA
Assemblers perform tasks that are necessary to the production process. They aid in the fabrication, maintenance, and repair of component parts and products. They must also maintain tidy work areas and follow detailed instructions in order to meet safety and quality requirements. As an assembler, you must have an aptitude for mechanics and an eye for detail. A top-notch assembler should have the ability to comprehend and follow detailed verbal and written instructions, as well as diagrams, blueprints, and other technical documents, and be a team player. Assembler Responsibilities: * Using tools to make or repair parts and products. * Interpreting technical documents, such as diagrams, schematics, blueprints, or other verbal or written instructions. * Working with other members of the line or group in order to assemble products. * Keeping a clean and tidy workspace. * Meeting all safety requirements of the company and industry. * Identifying any defective items and handling them according to established procedures. * Using reason to solve problems as they arise. Assembler Requirements: * A High school diploma or GED. * Attention to detail. * Excellent hand-eye coordination. * Skilled in mechanics. * Ability to lift at least 50 lbs. * Willing to perform repetitive tasks while sitting or standing for extended periods of time. The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES * Customer Focus * Operational Excellence * High-Performance Culture * Innovation * Financial Strength OUR BEHAVIORS * Own It * Act With Urgency * Foster a Customer-First Mindset * Think Big and Execute * Lead by Example * Drive Continuous Improvement * Learn and Seek Out Development * Promote Transparent & Open Communication At Vertiv, we're on a mission to empower the people that will power the future. From a simple swipe to life-changing medicines, from push notifications to generative AI. We design, manufacture, and service the products and solutions that keep the world connected. With $6.9 billion in revenue, a strong customer base and global reach spanning nearly 70 countries, we are uniquely positioned to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to **********************. If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire.$30k-38k yearly est. Auto-Apply 8d agoWiring Assembler - Systems
Aerotech, Inc.
Assembly line worker job in Pittsburgh, PA
Job Description Wiring Assembler - Systems - Up to a $3,000 Sign-On Bonus! Looking for meaningful work where you can make a difference in global innovation? Engineer a better future with Aerotech, a global leader in precision motion and automation. Our customers create some of the most innovative products on the planet, from life-saving medical devices to tools for deep space exploration. Our precision motion and automation systems make it all possible. Build a lasting, satisfying career at Aerotech, where we foster growth, empower employees and promote from within. You'll find unparalleled opportunities and a company that values your voice. We also provide an extensive total rewards compensation system, including: Bonus payments every 6 months Rich health plans Retirement planning with our 100% company-paid Employee Stock Ownership Trust If you're mechanically inclined or technically savvy with a passion for cutting-edge technology, we want to hear from you. What will your day look like? At Aerotech, you will: Assembles cables and cable harnesses using hand tools, power tools, and soldering Reads wiring and assembly drawings Routes and attaches wires and connectors to electronic circuitry and/or subassemblies Utilizes test equipment to test for conformance Wires system level motors and stages Wire multi-axis assemblies What will separate you from the rest? Experience with: Excellent soldering skills, preference to have familiarity with IPC-620 soldering standards Ability to read and interpret wiring assembly drawings Experience with hand tools and crimpers Effective computer literacy, including experience with ERP Software Problem solving skills Minimum Qualifications: High school diploma or GED One to five years of related experience Vocational or technical school training is preferred, but not required Equivalent combination of education and experience may be considered Benefits: Aerotech has been advancing industries with our precision motion technology for more than 50 years. Our employees are our future, and we continue to grow by investing in our employees through continuous paid on-the-job training in a clean and climate-controlled environment, while providing the following exceptional benefits and more! Competitive compensation Bi-annual bonus Annual raise eligibility UPMC Health Insurance Dental insurance Vision insurance Life insurance Retirement Plan Employee Stock Ownership Trust 401k Paid time off Parental leave Referral program Professional development assistance Tuition reimbursement Must be authorized to work in the US currently and in the future without employer sponsorship. Aerotech is committed to the concept and practice of equal employment opportunity and affirmative action. The Company's policy is to provide equal employment opportunity to all qualified applicants and employees regardless of their race, color, religion, age (40 or over), sex, national origin, disability, or veteran status. This policy applies to recruiting and hiring, training, promotion, compensation, benefits, transfer, layoff, and termination. The Company makes and will continue to make all employment decisions in a non-discriminatory manner. The Company is collecting the information requested in this employment application for purposes of evaluating your suitability for hire by the Company. The Company will share the information that you provide in this employment application only with Company management officials who are involved in the hiring process or who are otherwise involved in making employment-related decisions on behalf of the Company. Powered by JazzHR zJ39yskqvY$28k-36k yearly est. 14d agoAssembler - Computing 2nd Shift (3:00pm-11:00pm M-F)
Havis Inc.
Assembly line worker job in Warminster, PA
Job Title: Assembler - Computing Department: Assembly reports to the Supervisor of the Assembly department Responsibilities: Read work orders, follow drawings/work instructions, sample assemblies, or verbal orders to assemble products Assemble manufactured products according to blueprints, work orders, verbal instructions, or work instructions Execute assembly builds in a timely manner as defined by the production schedule Work at bench or on the shop floor to assemble vehicle accessories Collect parts from inventory, as needed Receive verbal instruction on priority of orders Set-up daily work according to production schedule or verbal instructions Use hand tools including torque controlled electric drills, wrenches, torque wrenches, and auto screw feeder Work at different workstations & cross-train to support other assembly departments, as required Group and package finished products with packing list for processing by shipping department Package parts together according to production schedule or verbal instructions Operate various packaging equipment including paper machine, hand sealer, bubble machine, tape machine and tape gun Label finished products and complete paperwork Maintain a clean work area and participate in the maintenance of the facility Adhere to all safety and ESD protection standards as dictated by company Preform testing on a variety of custom electronic products Participate in product assembly training sessions, team activities and our continuous improvement process Utilize quality assurance tools such as the Vision System, Inspection Tracker, and Quality Tracker to ensure product standards are met and maintained Support the vision, mission, strategy and values of the company Requirements: Must have High School Diploma or equivalent, technical certification a plus Mechanically inclined with experience using basic hand tools Ability to understand written and verbal instructions in English Ability to work in a team environment and communicate effectively Ability to read and interpret work instructions, and engineering drawings Ability to perform basic mathematical computations & computer applications Must possess a strong attention to detail Must be able to tolerate long periods of standing Must be able to perform activities that include bending, stretching and climbing Ability to regularly lift and move up to 25 lbs. and occasionally up to 50 lbs. Visual requirements include close vision, color vision, depth perception, and ability to focus General knowledge of workplace safety & ESD controls, a plus General knowledge of Quality Management Systems such as ISO9001 Work Environment - Manufacturing: Machinery Chemicals, (See SDS) Dust Noise Protective clothing and equipment may be required Use of a computer or electronic equipment may be required Prepared by: Human Resources Approved by: VP Operations 2nd Shift (3:00-11:00pm M-F)$31k-38k yearly est. Auto-Apply 60d+ agoProduction Worker
Parallel Employment Group
Assembly line worker job in Brocton, NY
Parallel Employment is looking for motivated individuals to join our team as Production Workers! If you are seeking a hands-on job in a fast-paced environment, this opportunity is for you. As a Production Worker, you will be responsible for a variety of tasks related to the production process, including operating machinery, assembling products, and conducting quality inspections to ensure that all products meet company standards. Key Responsibilities: Operate and monitor production machinery to ensure efficient operations. Must be able to handle small parts with a high level of care, ensuring minimal breakage Assemble products according to specifications and maintain accurate records. Conduct regular quality checks on finished products to ensure compliance with safety and quality standards. Maintain a clean and organized work area in accordance with safety and cleanliness protocols. Collaborate with team members to achieve production goals and efficiency targets. Report any equipment malfunctions or safety concerns to a supervisor immediately. Wage: $16 per hour Shifts Available: 1st Shift: 5:00 AM - 3:30 PM 2nd Shift: 1:30 PM - 12:00 AM Requirements High school diploma or equivalent preferred. Ability to read and write in English Prior experience in a manufacturing or production environment is a plus. Ability to operate machinery effectively and adhere to safety protocols. Strong attention to detail and a commitment to maintaining quality standards. Must be able to lift up to 50 lbs and perform repetitive tasks. Good communication skills and ability to work as part of a team. Willingness to work flexible hours, including overtime and weekends if needed. We are an Equal Opportunity Employer #ind456$16 hourly 23d agoWiring Assembly
Champion Personnel System
Assembly line worker job in Aurora, OH
Now Hiring: Wiring Assemblers - 1st & 2nd Shift | Aurora, OHHours & Location: 1st Shift: Monday-Friday, 6:00 AM to 2:30 PM 2nd Shift: Monday-Thursday, 2:00 PM to 12:30 AM Pay & Benefits: $20 to $22/hour, depending on experience Contract-to-hire with long-term opportunity and strong advancement potential Full benefits starting the first of the month after hire, including: 100% employer-paid medical, dental, and life insurance (employee only) 401(k) with employer match: 100% match on the first 3%, 50% match on the next 2% Clean, safe, and climate-controlled environment Modern tools, equipment, and high-tech facility Company experiencing 50% growth with a 10-month backlog of orders Job Responsibilities: Join a fast-growing electrical systems manufacturer as a Wiring Assembler. You will play a key role in building high-quality control panels and electronic harnesses. Daily tasks include: Final assembly of wire harnesses from machine-made subassemblies Assembling small parts into complete electronic systems using instructions and hand tools Sorting, labeling, and packaging assemblies and components Reading and following wiring diagrams and assembly schematics Using sleeves, cable lacing, ties, and conduits to bind wires accurately Performing visual and electronic testing using basic diagnostic tools (e.g., continuity tester) Inspecting work for accuracy and compliance with specifications Maintaining a clean work area and caring for tools Required Qualifications: Prior experience in wiring or electronic assembly Ability to follow wiring diagrams and printed assembly procedures Familiarity with electronic test tools (e.g., continuity or cable testers) Experience using calipers, micrometers, or similar precision measuring tools Strong attention to detail and steady hand coordination Visual acuity and manual dexterity to work with small components Basic understanding of electricity is a plus Physical Requirements: Ability to use fingers for small parts assembly Able to sit or stand for extended periods Visual ability to read diagrams and inspect fine details Work Environment: This is a fast-paced but highly organized manufacturing setting. You'll work in a well-lit, modern facility with specialized departments for wiring, assembly, testing, staging, and shipping. The company operates cutting-edge machinery including water jets, lasers, and robotics. The team is collaborative, production-focused, and quality-driven.Dress Code & Safety: Steel-toe boots, jeans, t-shirt, and safety glasses required Safety glasses provided Clean, organized, and safety-oriented facility Pre-Employment Requirements: 5-panel drug screen Background check$20-22 hourly 60d+ ago
Looking for a job?
Let Zippia find it for you.
Learn more about assembly line worker jobs
How much does an assembly line worker earn in Erie, PA?
The average assembly line worker in Erie, PA earns between $23,000 and $36,000 annually. This compares to the national average assembly line worker range of $22,000 to $35,000.
Average assembly line worker salary in Erie, PA
$29,000
Job type you want
Full Time
Part Time
Internship
Temporary