Assembly line worker jobs in Fresno, CA

This position requires the assembling of parts according to instructions and within a specific time frame, while using the appropriate tools and/or equipment according to safety and quality standards, as well as carrying out any other duties as directed by the Leadman or Supervisor. ESSENTIAL FUNCTIONS Read, interpret and follow basic blueprints, diagrams, engineering drawings, specifications, bills of materials, and other written instructions or procedures to accurately assemble equipment and products Perform quality work checks to insure the product meets quality standards Identify product defects and complete appropriate documentation when defects are identified Perform all work in accordance with quality standards and established safety procedures Maintain a clean and safe work area Assembling units as directed by the trainer, Lead or Supervisor with quality in mind in a specified time frame. Performed adjustments needed to ensure factory settings and specifications using schematics and/or engineering documentation. Must be able to lift up to 25 pounds. Must be able to climb up ladders. May be required to work beyond normal business hours when necessary. Supporting company policies and procedures, goals and objectives, ISO policies, and good manufacturing practices. NON-ESSENTIAL FUNCTIONS Regularly perform repetitive tasks Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus Ability to perform work accurately and thoroughly Ability to use thinking and reasoning to solve a problem and to think in such a way as to produce a new concept or idea Demonstrate commitment to an Injury-Free Environment through own actions and mentoring others. Communicate and enforce corporate environmental, health, and safety program. Fill out forms, as need. REPORTING RELATIONSHIP Laser Supervisor Laser Lead SUBORDINATE STAFF None KNOWLEDGE Forklift and Overhead Crane Preferred. Be able to use the metric system. Must be a good communicator. Must be able to use Hand Tools and Power Tools. Must have assembly experience. Enthusiastic, cooperative, and positive behavior. ISO experience a plus. SKILLS High attention to detail and self-motivation skills Basic reading skills. Must be able to follow directions Basic computer navigation and utilization skills Must be able to use addition, subtraction, multiplication and division. Must be able to work in a team and follow deadlines. Must have good leadership and communication skills. PAY RANGE $25-26/HR SCHEDULE Monday - Thursday 6:00AM - 5:00PM 4/10 Schedule EDUCATION and QUALIFICATION High School education preferred. MENTAL Ability to accept and follow instructions. Being open to feedback from peers, Leadman and Supervisor. Realize one's own limitations and seek assistance when needed.

About the Company: DwyerOmega is a globally trusted leader in manufacturing innovative instrumentation solutions for the Process Measurement, Automation, Control and HVAC markets. With very strong brand recognition and high levels of customer loyalty, DwyerOmega has an unmatched reputation for providing customized solutions that meet and exceed customer needs. Our team of engineering experts help our customers select technical, and often configured, product solutions for their unique applications. The company offers over 300,000 state-of-the-art products for process measurement and control of temperature, humidity, pressure, strain, force, flow, level, pH, conductivity, and indoor air quality, and is a recognized global leader in the digital marketing of technical products. The products that we manufacture are used to control and drive process efficiency, creating safe and sustainable environments. At DwyerOmega, we enable our customers to improve the world - one measurement at a time. We achieve this through our unwavering commitment to technology, customer service, and overall continuous improvement. Every day, we strive to cultivate a culture of ingenuity, empowerment, accountability, adaptability, and speed. The company's corporate headquarters are based in Michigan City, Indiana, and Norwalk, CT with manufacturing locations and sales offices located throughout the world. Analytical Industries: Analytical Industries is a leading provider of advanced gas analysis and measurement solutions for industrial, medical, and environmental applications. We take pride in our engineering excellence, precision manufacturing, and commitment to helping customers achieve accurate, reliable process control. As part of the DwyerOmega family, we bring together decades of instrumentation expertise and customer-focused innovation. Position Summary: The Assembler is responsible for assembling, wiring, soldering, testing, and inspecting small electro-mechanical components used in sensor and analyzer products. This position requires close attention to detail, steady hands, and adherence to established quality and safety standards. Working under the direction of the Lead or Production Manager, the assembler follows detailed assembly instructions, performs accurate and repetitive work, and supports overall production efficiency. The role also includes maintaining a clean and organized work area and performing all other duties as assigned. Responsibilities include the following. Other duties may be assigned. * Assemble electrochemical sensors and electromechanical analyzers, and related subcomponents according to engineering drawings, schematics, and work instructions. * Perform wiring, soldering, and mechanical assembly using hand tools and electronic testing equipment. * Log production results, nonconformities and test outcomes accurately in manufacturing documents such as the DHR. * Inspect components before assembly for defects or non-conformance. * Maintain a clean and organized work area in accordance with safety and 5S practices. * Collaborate with engineering and quality teams to identify assembly issues and propose process improvements. * Follow all company policies related to safety, quality assurance, and environmental compliance. Requirements Essential/Preferred Skills: * 1-2 years of work experience in electro-mechanical assembly, preferably in sensor instrument manufacturing. * High school diploma or GED equivalent. * Ability to read and interpret drawings, schematics, and work instructions. * Prior experience with hand tools. * Strong attention to detail and commitment to product quality. Work Conditions and Physical Requirements: * Work performed primarily in an office/manufacturing space. * Frequent sitting, standing, bending, and using small tools. * May involve handling chemicals used in assembly rooms. * Use of PPE (gloves, safety glasses) as required. * May require repetitive motions to maintain quality of sensor/analyzer products.

When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation's premier propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States. Applications for this position will be accepted until 11/24/2025. Posting Job Summary (Purpose): The Utility Worker primarily works in the outside production area of the AmeriGas Cylinder Exchange facility. The employee is responsible for the processing of cylinders (20 lb. barbeque grill cylinders). Key Characteristics: Models a commitment to safety through his/her own day-to-day behavior; follows company safety procedures and policies Demonstrates high professional and personal standards; has a commitment to quality, timeliness, and continuous improvement Ability to function effectively as a member of a production team Duties and Responsibilities: Sort, inspect, clean, paint, label, and refill empty cylinders. Maintain a safety focus at all times and wear the proper PPE Ensure the consistent quality of cylinders are being processed Load filled cylinders onto the truck(s) for the next day's shipments. Ability to stand and walk 8 - 12 hours per day. Ability to lift 50 pounds repeatedly throughout the day. Perform general housekeeping duties. Knowledge, Skills and Abilities: Ability to follow processes, procedures, and instructions Ability to function effectively as a member of a production team Willingness to grow and learn Basic mechanical aptitude Basic computer knowledge Work in a fast-paced environment Be able to stand 8-10 hours per day Ability to obtain required state licensing Ability to be forklift certified Education and Experience Required: 1 - 2 years work experience in manufacturing is preferred High School Diploma or GED Working conditions: Environmental conditions such as wind, rain, ice, and snow may affect this job, as the production area where the employee spends most of the workday is not enclosed. AmeriGas Propane, Inc. is an Equal Opportunity Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices. AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis. The pay for this position ranges from $18.00 to $19.00 , depending on circumstances including an applicant's skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Additional compensation may include eligibility to earn a performance-based bonus or commissions on completed sales depending on position. This is the Company's good faith and reasonable estimate of the range of compensation for this position as of the time of posting. The Company offers a wide array of comprehensive benefit programs and services including medical, dental, vision, flexible spending and health savings accounts to our benefits-eligible employees. Additional benefits include retirement savings plans like 401(k) and paid days off such as parental leave, military leave, vacation/paid time off, sick leave in compliance with state law, as applicable, paid holidays, and disability coverage. Some benefits offerings are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works.

Assembly Operators are responsible for the assembly of medical components, subassemblies, products, or systems. Every team member is responsible for maintaining housekeeping and organization of the work area as well as following CathX Medical policies and procedures. This role complies to FDA QSR (21CFR 820), ISO 13485 requirements and adheres to the Quality Management System (QMS).

At Beyond Financial Solutions, Inc., we focus on sourcing best-in-class candidates for rewarding positions in the state of California, and we specialize in the world of Human Resources. Start your career with us now and let us know what you're interested in so that we may help you find the right position best suited for your qualifications and skills. Job Description As an Assembler - Warehouse Worker, you will assemble food kits in a conveyor belt environment within the time scheduled and the output parameters required. This is an active role that requires you work on multiple projects at once. Our success depends on your ability to deliver in a safe, accurate and timely manner! Duties and Responsibilities: Reads production schedule, customer order, work order, shipping order, or requisition to determine items to be moved, gathered, or distributed. Conveys materials and items from receiving areas to designated areas for shipment. Sorts and places materials or items on racks, shelves, or in bins according to predetermined sequence such as size, type, style, color, or product code. Sorts and stores perishable goods in refrigerated rooms. Fills requisitions, work orders, or requests for materials, tools, or other stock items and distributes items. Assembles customer orders from stock and places orders on pallets or shelves, or conveys orders to shipping department. Assist in recording amounts of materials or items received or distributed. Compiles worksheets or tickets from customer orders. Maintain clean work environment. Follow up on orders assigned by superintendents. Operation of all equipment to assist in operations when needed. Perform other duties as assigned. Work Environment: Fast paced work environment with, in and around industrial machinery. Cold storage environment. Warehouse bays are kept at a constant 32 degrees (and below zero in certain areas). Ability to withstand cold storage temps for extended periods of time (warm gear provided by company). Noise level varies and at times and can be loud. Qualifications Basic Qualifications High school diploma or GED preferred. Strong communication skills. Ability to effectively present information in one-on-one and small group situations to team members. Proven ability to use basic mathematical skills. Strong problem solving abilities. Additional Information All your information will be kept confidential according to EEO guidelines.

PeopleReady is looking for Manufacturing And Production Workers to join our dynamic team. Available jobs can include Production Worker, Assembly Worker, Machine Operator, Material Handler and Quality Assurance Inspector. Apply today to find out what roles we have available and find the perfect fit for you! **As a PeopleReady Associate, You'll Benefit From:** + Next day pay for many of our open positions + The choice of long-term positions for steady work or short-term positions for extra cash + The convenience of applying for and accepting jobs right from our mobile app, JobStack! Text "READY" to 81555 to download JobStack and get started today **Pay Rate** _The pay rate for this job is $16.90 - $18.50 / hour ._ _This range is a goodfaith estimate based on factors such as relevant skills, experience, education, training, geographic location and other considerations permitted by law. An employee's pay history will not be a contributing factor where prohibited by local law. Applications are accepted on an ongoing basis unless a deadline is otherwise stated._ **What You May do in Manufacturing And Production** **Worker** **:** + **Production Worker:** Support manufacturing processes by producing products, operating machinery, and performing quality checks + **Assembly Worker:** Assemble components on an assembly line and inspect product to ensure high quality + **Quality Assurance (QA) Inspector:** Inspect materials to ensure consistency and integrity, and maintain, test and troubleshoot all QA devices + **Machine Operator:** Operate machines needed based on work orders and inspect products for defects and machines for malfunction + **Material Handler:** Identify, pull, pack, crate and load products **Available Shifts** Shift timings: All Available **Job requirements** + Experience in manufacturing and production, preferably in one or more of the mentioned sectors + Ability to perform physical tasks, including lifting and moving heavy objects + Ability to work in various environment and climate if needed + Strong work ethic, teamwork and communication skills **Ready to take control of the way you work?** Complete our application to join the PeopleReady team today. Employees and their eligible dependents are offered Medical/Dental/Vision insurance and short term disability, in addition to other programs ,as well as number of paid days off and/or more generous paid sick leave days]. More details about our benefits can be found by copying and pasting this URL into your browser: ************************************* PeopleReady considers all applicants for employment regardless of background, in compliance with applicable laws regarding fair hiring practices. PeopleReady is an equal opportunity employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristics protected by law. We consider qualified applicants with arrest and conviction records in accordance with applicable law. TrueBlue, Inc. and its brands welcome and encourage applications from candidates with disabilities. Accommodations are available on request for candidates taking part in the selection process. If you require disability-related accommodation during the recruitment process, please contact your Recruiter or Employee Relations at HR-Advice@trueblue.com or **************. TrueBlue, Inc. and its brands will consult with all applicants who request disability-related accommodation during the recruitment process to ensure that the accommodation provided takes into account the applicant's individual accessibility needs. \#EVER650D PeopleReady is an equal opportunity employer, and we value diversity. We do not discriminate based on race, religious affiliation, color, national origin, gender, age, marital status, sexual orientation, gender identity, veteran status, disability, or any other basis protected by law. We will get to know you and connect you with jobs that match your skills, experience and preferences. We work hard every single day to find jobs so each employee has opportunity and variety in their work.

Immediate Opportunity: Assembly Worker- Wheelchair Manufacturing in Torrance, CA, Must have manufacturing background. Assembly - Chair Dresser Pay Rate: $17.87 per hour Hours: 6:00 AM to 2:30 PM Key Requirements: Must have at least 1 year assembly experience Must have experience working in a production environment Must be able to lift up to 50lbs Must be computer literate Must have experience using power tools Must be able to read blueprints & read assembly instructions Must e responsibe, reliable, dependable and trainable Must have a sense of urgency Qualifications: 1+ years experience in medical device or similar regulated industry (electronics, aerospace, pharma) Dependable and eager to learn Strong work ethic and reliability Bilingual preferred but not required/ Must understand English #HSSB

Preferred Job Qualifications: Previous experience in aerospace manufacturing or related industries familiarity with inspection processes and basic quality standards Ability to perform polishing and cleaning and packaging with attention to detail. Forklift certification or proven forklift operating experience. Ability to safely lift and move materials as required. Strong organizational and time management skills valid driver's license with a clean driving record Ability to follow written and verbal instructions accurately. Commitment to safety protocols and workplace cleanliness Strong teammate skills with the ability to work independently when needed. Physical and Mental Requirements: Able to lift 25 pounds regularly. Ability to sit or stand for extended periods. Must be adaptable to a constantly changing environment and perform well under deadlines. Experience and Education: Previous experience in a similar role is preferred but not required. Must demonstrate the ability to learn and apply new skills effectively. We are looking for motivated individuals who can contribute to our team-oriented environment and handle the demands of a high-paced production setting. Please note that this job description is not exhaustive. Management reserves the right to add, modify, change, or rescind work assignments or different positions and to make reasonable adjustments to ensure qualified employees can perform the essential functions of the job. Hourly Rate of Pay: $18.00/ hour to $20.00/ hour **Please note that the salary range information is only applicable to California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee's pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Equal Opportunity Employer: Western Precision Aero is an Equal Opportunity Employer and all employees of RBC are subject to E-Verity. Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident) or a Foreign Person for whom a license is obtained.

Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. We are currently seeking Assembly Workers to join our team in San Diego, CA! Pay Rate- $18/hour Job Description: Assemble components and parts according to production specifications and blueprints. Conduct inspections of assembled products to ensure quality and compliance with standards. Use hand tools, power tools, and machinery to complete assembly tasks. Maintain a clean and organized work area to ensure safety and efficiency. Collaborate with team members to meet production goals and deadlines. Report any issues or discrepancies in assembly to supervisors. Follow all safety procedures and regulations in the workplace. Requirements Job Requirements: Previous experience in assembly work preferred but not required. Ability to read and understand technical specifications and blueprints. Strong attention to detail and quality control. Basic math skills for measurements and calculations. Ability to lift up to 50lbs and perform physical tasks as required. Must be able to work in a fast-paced environment. Reliable transportation is required. Must pass a drug test and background check. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Temporary- Assembly Operator IIl Mason welcomes people who share our determination and high standards to join us in doing work that moves the world forward. We design, manufacture, and market highly engineered products and systems principally for the aerospace and defense markets. Mason, a wholly-owned subsidiary of Transdigm, offers world-class control devices and subsystems - such as control grips, throttles, HaWC controllers, and communications interfaces - for today's advanced cockpits, military vehicles, and other specialized applications. Our solutions fall into two broad categories: control products and components. Title: Assembly Operator Job Family: Controls Reports to: Production Manager FLSA Status Non exempt EEOC Class: Operative Summary Works within the Controls area to assemble products per specs, drawings and work instructions. Position Duties Essential functions of the position include, but are not limited to: * Works assembling connectors per Blue prints and verifying process. * Setup and run wire marking machines per blue prints and verify quality * Positions parts to be assembled by following blue prints and Standard Work Instructions. * Works at station as member of assembly group assembling one or more specific parts to meet production requirements. * Positions parts in specific opening and screws or bolts them in place. * Solders/Welds parts by following schematic, blueprint, and Standard Work Instructions to assemble final unit. * Verifies correct assembly of final unit. * Ability to test unit with related test fixture. * Other duties as assigned. * Supports any other areas as/if required. Qualifications/Experience * Previous experience in a manufacturing / Assembly role. * Soldering/Welding. * High School diploma or GED. * Must be able to read blue prints and/or schematic reading. * Finger dexterity. * Hand-eye coordination. * Ability to verify function of unit per final blueprint * Effective communication skills in English with the ability to read, speak, and understand English. Physical Demands Physical Requirements Rarely (0% - 12%) Occasionally (12% - 33%) Frequently (34% - 66%) Regularly (67% - 100%) Seeing: Must be able to… x Hearing: Must be able to hear well enough to communicate with co-workers x Standing/Walking: X Sitting: X x Climbing: Stooping/Kneeling: X Lifting: X Pulling/Pushing: X Grasping/Feeling: x Reaching: x Working Conditions: Work is conducted in a well-lighted, temperature-controlled environment. Work area may have several other workstations with other assemblers assembling products. Compensation Pay Range $20.00- $27.00 Per hour Must be authorized to work in the U.S. International Trade Compliance Requirements: This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). This position requires either U.S persons (as defined in applicable export regulations) or a non [1] U.S person who is eligible to obtain required export authorization(s). Equal Opportunity Employer Mason is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center as a result of your disability. Mason prohibits discrimination or harassment based on the following categories: race, color, religion, religious creed (including religious dress and grooming practices), national origin, ancestry, citizenship, physical or mental disability, medical condition (including cancer and genetic characteristics), genetic information, marital status, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender, gender identity, gender expression, age (40 years and over), sexual orientation, veteran and/or military status, protected medical leaves (requesting or approved for leave under the Family and Medical Leave Act or the California Family Rights Act), domestic violence victim status, political affiliation, and any other status protected by state or federal law.

Duration: 6 months (possibly longer) Pay Rate: $20-27/hr W2 Works within the Controls area to assemble products per specs, drawings and work instructions. include, but are not limited to: * Works assembling connectors per Blue prints and verifying process. * Setup and run wire marking machines per blue prints and verify quality * Positions parts to be assembled by following blue prints and Standard Work Instructions. * Works at station as member of assembly group assembling one or more specific parts to meet production requirements. * Positions parts in specific opening and screws or bolts them in place. * Solders/Welds parts by following schematic, blueprint, and Standard Work Instructions to assemble final unit. * Verifies correct assembly of final unit. * Ability to test unit with related test fixture. * Other duties as assigned. * Supports any other areas as/if required. Qualifications/Experience * Previous experience in a manufacturing / Assembly role. * Soldering/Welding. * High School diploma or GED. * Must be able to read blue prints and/or schematic reading. * Finger dexterity. * Hand-eye coordination. * Ability to verify function of unit per final blueprint * Effective communication skills in English with the ability to read, speak, and understand English. Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices. Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at accommodations@butler.com.

for each production line. In general, the position is responsible for following work instructions to modify and/or package equipment per customer requirements and quality guidelines. Essential Duties and Responsibilities: Follow work instructions in: Loading the production line, Unpacking product, Repackage, Label, Testing as required Soldering Crimping - Hand and Machine Use hand tools in modifying equipment to meet quality requirements of customers. Work effectively in a team environment in order to produce the highest quality products according to standards established by customer requirements and quality policies. Assist in the achievement of departmental and company goals. Conduct product testing according to testing requirements and guidelines. Follow all safety requirements per Company policy and CAL-OSHA regulations. Maintain work station in a clean and safe manner. Follow company rules and regulations. Treat co-workers with respect. Process ownership First article involvement Follow work instructions Clean and maintain work area. Follows ISO, IATF and all other applicable procedures and company rules and policies. Follows all safety requirements per company policy and Cal-OSHA regulations. Follow the Punctuality and Attendance Policy by being regular and prompt. Maintains compliance with federal and state regulations concerning safety and employment. Perform other duties as required and assigned. Qualifications / Requirements: Minimum of 6 months experience in a production/assembly environment, preferred. Minimum of 6 months experience of soldering and crimping - hand and machine, preferred. Ability to read and comprehend work instructions and engineering drawings. Manual Dexterity. Able to distinguish colors. The ability to have regular and prompt attendance. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. This position requires standing for 8 plus hours a day on a cement floor unless performing certain functions such as soldering and testing product. Employees must be able to move up and down the production line rotating between work stations, lift product from ground floor level and place on conveyor approximately 32” high, and stretch about 2' across the conveyor while performing the functions of the job. Lift up to 50 pounds. Must be able to read and follow instructions; distinguish colors of wiring, and able to hear sound while testing or reading the meters. Reasonable accommodations may be made to enable individuals to perform the essential functions.

Machine Operators run high speed automated equipment for the boxing line and manage all aspects of the boxing line. They verify usage of correct materials, commodities & date codes and are responsible for ensuring that our products are produced in accordance with quality and safety standards. The machine operator will need to maintain a good attendance record and meet production standards while working on manufacturing equipment within a Food Manufacturing facility. Pay: $18.00 - $21.00 per year DUTIES AND RESPONSIBILITIES/ESSENTIAL FUNCTIONS * Before startup - checks equipment and work area to ensure safety and sanitation conditions are ready for use. * Assembles and disassembles equipment for sanitation purposes. * Set up and adjust equipment for production runs. * Based on line speed, adjusts equipment to meet specifications, and periodically checks product to ensure specifications are met. * Perform all quality checks assigned to each position on the production line. * Coordinates with other departments when needed to ensure the flow of the packaging materials and raw materials meet line needs. * Maintains records and compiles reports as required for production and quality. * Assists with and performs changeovers and /or adjustments on machines within area of responsibility. * Read and interpret packaging specifications, schedules, pallet configurations, code date formats, and all customer specifications. * Daily attendance to avoid interruption of production. * Review and enforce the Company's Food Safety, Quality -GMP's and Regulatory Standards. * Follow approved clean up procedures and shutdown. * Performs other duties as assigned * Works evenings and weekends as required. QUALIFICATIONS To execute this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Education: HS Diploma or GED * Ability to follow simple instructions written and/or oral. * Use calculator to perform general mathematical functions * Work with others and coordinate production with co-workers * Two years of proven experience as a machine operator * Working knowledge of diverse high-speed machinery * Understanding of production procedures PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel; and talk or hear. The employee frequently is required to stand for long hours, walk, and reach with hands and arms. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. All employees must wear ear protection at all times while in the plant. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to outside weather conditions. The noise level in the work environment is high. Note: The statements herein are intended to describe the general nature and level of work being performed, but are not to be seen as a complete list of responsibilities, duties, and skills required. RRNC is an At-Will Employer.

THE ROLE: Supervisor * Travel Requirement: None * FLSA Status: Hourly - Non-Exempt. * Shift: 1st Shift * Employment Category: Full-Time Regular * Pay Range: $17.00 to $19.00/hr. Generous Brands is dedicated to inspiring people to thrive through the power of vibrant nutrition through its leading brands, Bolthouse Farms, Evolution Fresh and our joint venture with Sambazon. Bolthouse Farms is the preeminent provider of chilled juice, smoothies, and protein drinks. Evolution Fresh - is the premier, cold-pressed juice brand and maker of the new Real Fruit Soda. Through our integrated partnership with Sambazon we produce and sell their high-quality Acaí beverages. Formerly known as Bolthouse Farms - Generous Brands was born out of the independence from its carrot operations and is poised to be the "World's Largest Beverage Start-Up." Currently we have 1000 employees located across the country at our hubs/facilities in Bakersfield, CA, Rancho Cucamonga, CA & Chicago, IL. You can connect with our brands on their socials - Bolthouse Farms (LinkedIn, Instagram and TikTok ) and Evolution Fresh (LinkedIn, Instagram and TikTok). WHAT YOU'LL BE RESPONSIBLE FOR IN THIS ROLE: The Production Worker will be responsible for packaging and stocking boxes onto a pallet while maintaining a clean work area. The ideal candidate will be positive, willing to work hard and react quickly under pressure. * Packaging and stocking salad boxes onto a pallet in an organized manner * Perform quality checks on product to ensure proper and accurate labeling * Replace the rejection bin as necessary * Maintain the work area clean and free of debris to ensure a safe working environment * Responsible for maintaining open communication with coworkers to inform them of any unusual or potentially dangerous findings within or around the department * Assist in other areas of the facility as business needs require * Responsible for assisting the equipment operators as needs arise * Perform other duties as assigned MINIMUM QUALIFICATIONS: * Must have High School/GED or one to two years' experience in related field or combination of both education and experience ADDITIONAL REQUIRED QUALIFICATIONS: * Must be able to handle multiple tasks * Ability to work in a fast paced, high pressure environment * Ability to work as a team and follow instructions * Must be able to use or learn to use the equipment and tools used to perform the job * Participate in company orientation and training * Must be able to work the scheduled/assigned times, weekends and required overtime when needed PREFERRED QUALIFICATIONS: * Experience working on a production line in a food/beverage company * 1 year of experience in a production environment PHYSICAL DEMANDS: * Environmental exposure to wet and humid conditions * Material exposure- moving mechanical parts * Occasional exposure to fumes, airborne particles, toxic or caustic chemicals * Must be able to lift/push-pull/carry up to 50 lbs * Must be able to stand and walk for an extended period of time * Exposure to extreme cold temperatures (34 degrees or below) HOURS & WORKDAYS: * 1st Shift 6:00am-2:30pm, Monday through Sunday with rotating days off, when business requires overtime and weekends will be mandatory WHAT WE OFFER: Our rich benefits packages are designed to support the health and well-being of both our eligible co-workers and their families. * Medical * Dental * Vision * Group Life and AD&D * Voluntary Life and AD&D * Group Short-Term Disability * Group Long-Term Disability * Flexible Spending Accounts * Employee Assistance Program * 401(k) * Paid Time Off EQUAL EMPLOYMENT OPPORTUNITY We are an equal opportunity employer committed to fostering a culturally diverse organization. We strive for inclusiveness and a workplace where mutual respect is paramount. We encourage applications from a diverse pool of candidates, and all qualified applicants will receive consideration for employment without regard to race, color, ethnicity, religion, sex, age, national origin, disability, sexual orientation, gender identity and expression, or veteran status. We will provide reasonable accommodations to qualified individuals with disabilities, as need, to assist them in performing essential job functions. REASONABLE ACCOMMODATIONS Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. If you are interested in applying for employment with Generous Brands and need special assistance to apply for a posted position, or if you believe you do not meet any of the required qualifications of a posted position due to a protected disability and would like to explore the possibility of an accommodation, please contact our Talent Acquisition team at: ******************************* for additional support and guidance. RECRUITMENT AGENCIES: Generous Brands does not accept unsolicited agency resumes. Generous Brands is not responsible for any fees related to unsolicited resumes. #LI-JH1 #BolthouseFarms

Company: Spectrolab, Inc. Job ID: 00000267573 Job Description Qualifications: The Boeing Company has an exciting opportunity available on the Spectrolab Team for a Semiconductor Assembler in our Sylmar, CA facility. Position Responsibilities include, but are not limited to: Performs the processes necessary for the fabrication and production of Solar Cells, including Photolithography, Cap Etch/Window Clean, Thinning, Lift-Off, Evaporation, Sinter, Saw-Dice, Lot Code, electrical testing, microscope inspection and Silicon Diodes. Performs the processes necessary for growth of semiconductors, including operation of MOCVD vacuum system, Metal Organic material handling and X-Ray Diffraction. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee. Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Basic Qualifications (Required Skills/Experience): Proficiency in Microsoft Suite (i.e. Word, Excel, PowerPoint, Access) Preferred Qualifications (Desired Skills/Experience): Proficient in the use of Excel Experience using SAP Typical Education/Experience: High School Diploma/GED and typically 1 or more years' related work experience or an equivalent combination of education and experience. Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Boeing is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world. Relocation: No relocation available Export Control Requirement: Not an export control position Safety Sensitive: This is not a safety sensitive position Contingent Upon Award Program This position is not contingent upon program award Experience Level: Individual Contributor - A Job Type: Regular Job Code: DAJXIA (DB0) Equal Employment Opportunity: Stay safe from recruitment fraud! The only way to apply for a position at Boeing is via our Careers website. Learn how to protect yourself from recruitment fraud - Recruitment Fraud Warning Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. Request an Accommodation - Requesting Interview Accommodations Applicant Privacy - Applicant Privacy EEO is the law Poster - EEO is the law Boeing Policy on EEO - Boeing EEO Policy Affirmative Action and Harassment - Boeing Affirmative Action and Harassment Boeing Participates in E - Verify English - E-Verify (English) Spanish - E-Verify (Spanish) Right to Work Statement English - Right to Work (English) Spanish - Right to Work (Spanish)

Furniture Assembly Tech CA Flexible, Part-Time Opportunity to service Your Local Office Supply Store Do you have experience assembling furniture at Office Supply Stores or similar organizations doing handy work? We want you on our team! SPAR is seeking skilled assemblers to perform on-site service and furniture assembly in Office Supply Stores, as well as in-home assembly projects. Are you great with your hands? Do you enjoy assembling furniture and seeing the finished product of your work? If you have experience as an assembler, especially at Office Supply Stores, we want YOU on our team! Why You'll Love This Job: Great Pay: $16.75 - $18/hour for showroom service work Get Paid Fast: With DailyPay, you can work today and get paid tomorrow! Free enrollment required Consistent Work: Part-time, on-going projects servicing Office Supply Stores & customers in-home furniture assembly purchases Work Independently: Enjoy the flexibility of working on your own while still being part of a great team What You'll Be Doing: Assembling Ready-to-Assemble (RTA) Furniture in retail showrooms and customer homes Ensuring displays are set up properly and well-maintained Following plan-o-grams and completing customized category resets Reporting your completed work on the same day via our easy online system What You Bring to the Team: Previous merchandising or commercial furniture assembly experience (Office Supply Stores experience is a plus!) Ability to read instructions and assemble furniture efficiently Can lift up to 50 lbs. and stand for extended periods Reliable transportation (some travel may be required) Your own basic tools (drills, screwdrivers, etc.) Internet access and active email for reporting Be Part of Something Bigger! At SM&A, we provide essential services to top retailers and manufacturers across the U.S. Our work keeps retail moving forward, and we need talented individuals like YOU to help make it happen. Ready to build a career? Apply today! We Are an Equal Opportunity Employer SPAR provides Equal Employment Opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, SPAR complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. SPAR expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of SPAR's employees to perform their job duties may result in discipline up to and including discharge. We can recommend jobs specifically for you! Click here to get started.

Temp Requirements: 1+ years' work experience related to soldering and crimping in the electronics industry. Ability to communicate with manager and follow written and verbal instructions. Ability to interpret all documentation, including SOPs, work instructions, customer supplied drawings and IPC- 620 workmanship standards. Motivated and detail-oriented, attention to detail, excellent hand dexterity Proficient in basic math skills Possesses good communication skills and a great attitude Basic computer skills (database management, word processing and spreadsheet) Must be able to lift up to 30 pounds. Responsibilities: 1+ years: Wire harness assembly experience (highly preferred.) Ability to read and follow wire harness assembly instructions. Cuts, strips, crimps, or otherwise assembles the materials used to produce cable assemblies. Able to work with epoxies and adhesives. Routes, wires, and assembles electronic components using wire layout boards Operate semi-automatic equipment such as crimp presses, wire twisters and wire strippers Conducts functional and continuity tests of wire harnesses and cable assemblies using friendly test fixtures Use of a solder RoHS / Non-RoHS/ Leaded and lead-free solder connections. Ability to evaluate any mechanical or material issues Maintains a clean and safe work area Performs other related duties and assignments as required. All Production workers are expected to be available to work in all areas of production Job Type: Full-time Pay: $18.00 - $26.00 per hour Benefits: 401(k) Dental insurance Health insurance Vision insurance Schedule: 8-hour shift Ability to Commute: Fremont, CA 94539 (Preferred) Ability to Relocate: Fremont, CA 94539: Relocate before starting work (Preferred) 0.00

Job DescriptionDescription: : Union Rescue Mission (URM) is a 501(c)(3) nonprofit organization located in the Los Angeles Metropolitan Area. We are dedicated to serving men, women, and children experiencing homelessness and providing comprehensive emergency and long-term services to help them escape the dangerous streets of Skid Row. Established in 1891, URM is now one of the largest rescue missions of its kind in the United States and the oldest in Los Angeles. Join us at Union Rescue Mission as we bring hope and share the compassion of Christ to those devastated by homelessness. POSITION SUMMARY: Under the supervision of the Thrift Store Manager, the Thrift Store Production Worker is responsible for assisting the production crew in cleaning, prep, and tagging merchandise such as clothing, books, electronics, shoes, accessories, household items, etc. CORE WORK PRINCIPLE: Colossians 3:23 is the foundation of URM's standard for employment, “Whatever you do, work at it with all your heart, as though you were working for the Lord and not for people.” The goal for each employee is to enrich and sustain a humble heart attitude; to enrich and sustain a mindset of serving others, treating them with kindness and truth; and to enrich and sustain a zealous desire for achieving work objectives without any ulterior motives or agendas. THRIFT STORE FLOOR PRODUCTION WORKER ESSENTIAL FUNCTIONS: Cleans, tags, and packs merchandise for pricing. Determines which items are perishable and which are recyclable and discards unsellable items. Assists other departments/positions, as needed. Sets the pace for sorting. Records production numbers daily. (i.e., carts, units, etc.) Communicates regularly with management about store issues. Actively engages customers on floor sales to increase donations and merchandise sales. Ensures monthly revenue goals are met. Provides excellent customer service by greeting and assisting customers and donors; and responds to customer inquiries/complaints in a timely manner. Ensures store and displays are maintained, clean, and attractive. Maintains safety including all Health and Security policies and procedures. Conducts tasks and other projects as assigned by the Thrift Store Manager/Supervisor. Commitment to URM mission, vision, and core values. Encourages guests in their faith and growth in Jesus Christ. THRIFT STORE FLOOR PRODUCTION WORKER PHYSICAL DEMANDS: In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation(s) may be made to allow differently able individuals to perform the essential functions of the job. Must be able to lift 50 lbs. Requires regular standing, walking, sitting, crouching, stooping, speaking, hearing and seeing. Requires manual dexterity for regular repetitive finger motion such as frequent reaching, pulling, pushing, and lifting objects and operating equipment. Requires manual ability to operate a pallet jack. May be exposed to handling hazardous materials such as broken glass. THRIFT STORE FLOOR PRODUCTION WORKER WORK ENVIRONMENT: In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. Reasonable accommodation(s) may be made to allow differently abled individuals to perform the essential functions of the job within the environment. The office is clean, orderly, properly lighted, and ventilated. This position works predominantly indoors in a store, warehouse, or dock environment all of which are high traffic settings involving people, equipment and/or machinery. May be exposed to dust in the performance of certain duties. Noise levels are considered moderate to high. May be exposed to extreme temperatures both hot and cold (variable weather). Requirements: THRIFT STORE FLOOR PRODUCTION WORKER EXPERIENCE/ EDUCATION/LICENSURES/CERTIFICATIONS: High school diploma or equivalent, required. Thrift store, retail store, warehouse, assembly line or restaurant experience, a plus. THRIFT STORE FLOOR PRODUCTION WORKER KNOWLEDGE/ SKILLS/ ABILITIES: Fluency in Spanish, both verbal and written, a plus. Ability to demonstrate a strong work ethic. Perform in a fast-paced environment and possess strong organizational skills. Ability to determine the value of donations. Must exhibit strong customer service skills. Clear communication skills, both written and oral. Excellent time management skills and detail oriented. Ability to multi-task in a high-volume environment. Must be an effective team member. Must be able to work a flexible schedule, including weekends.

Temp To Full-Time Skillset Group is seeking a Wire Harness Assembler to work in the Irvine, CA area. This position will under shop supervision the Inspect and perform work in accordance with IPC-A610 and other quality standards as needed. This will be a 1st shift position and will be contract to hire. To apply email: *************************