Assembly line worker jobs in Gulfport, MS

TSC's is seeking a Temporary Assembler at our Huntsville, AL Discovery location to support our production division. Responsibilities: Performs basic and intricate electronic/electro-mechanical assembly functions on prototype and production type hardware according to company workmanship standards and military or client specifications. Assists in the development and wiring of engineering models and in the development of assembly methods and wire lists. Uses hand or power tools to trim, shim, cut, and make other adjustments to fit components together and align them properly. May assist in instructing and training lower-level assemblers. Reads and interprets wiring lists and assembly drawings and works to work orders using visual aids, ECNs, and schematics. May perform any rework from test failures in accordance with standard repair procedures and may set up and operate automatic prepping, loading, and insertion equipment. The employee may frequently be required to stand; walk; and use hands to finger, handle, or feel objects, tools, or controls. The employee is required to reach with hands and arms. Requirements: High school diploma and 0+ years of production and/or assembly experience Ability to lift and/or move up to 50 pounds. US Citizen and the ability to obtain and maintain a security clearance Ability to read and interpret work instructions, assembly drawings, and procedures to ensure components are assembled per specifications Preferred: Experience assembling sub-assemblies using hand tools and basic power tools with attention to accuracy and quality Experience inspecting work during assembly to identify and correct defects in real time Knowledge of IPC Standards/Practices i.e. IPC-610, IPC-J-STD, IPC-620 Ability to test printed wiring boards (PWBs) in accordance with defined test procedures Work Schedule: 7am-3:30pm TSC Benefits: TSC offers a stable work environment, a competitive salary, and a comprehensive benefit package; including ESOP participation, 401k Plan, Flexible Work Schedules, Tuition Reimbursement, Co-Sponsored Health Plan, Paid Leave and much more. Applying to TSC: Only those candidates invited for an interview will be contacted. Employment at TSC is contingent upon the successful completion of a comprehensive background check, security investigation, and a drug screening. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Title: Assembler 1 Job Code: Department: GWD Plant The Assembler will work on production equipment not automated such as RF Sealer and will assist the production areas in various tasks including sorting, counting, 5S activities, replenishing supplies, organizing stock, hanging blades, and assignments. May serve as a backup to other positions at the direction of management; other duties as assigned. Duties and Responsibilities * Work on non-automated equipment such as RF Sealer and other kitting functions * Perform work per work instructions and area metrics * Keep work area clean by disposing empty boxes and cardboard, as well as keeping material * Inform proper personnel of material shortage * Train others in all areas * Adhere to all safety requirements in the work area * Practice 5Ss Knowledge, Skills and Abilities * Understand and follow verbal and written instructions * Basic math skills * Work well with others Education and Experience Requirements * High school diploma or equivalent Milwaukee Tool is an equal opportunity employer.

At Electrolux Professional Group we hire to meet needs beyond tomorrow UNLOCK YOUR POTENTIAL At Electrolux Professional Group, we believe potential powers progress. We're not searching for perfection-we're looking for people with the right mindset. If you're curious, resilient, and ready to grow, you'll find the space to lead, innovate, and together with us Meet the needs beyond tomorrow. ******************************************************* Electro-Mechanical Assembler REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES: Must be able to read basic blueprints and/or electrical schematics and follow basic written work instructions. Able to operate various pieces of equipment such as, but not limited to banding tool, small hand tools, minor machines, etc. WE THINK YOU'LL THRIVE IF YOU: A high school diploma or GED is required. PHYSICAL REQUIREMENTS: Rarely (0-12%): Occasionally (12-33%): Frequently (34-66%): Regularly (67-100%): Seeing/Hearing/Standing/Walking/Stooping/Kneeling/Lifting/Pulling/Pushing/Fingering/Grasping/Feeling WORKING CONDITION: General plant environment. OUR CULTURE IN 4 WORDS Be Customer Obsessed. Build Trust. Be Bold. Act Sustainably. (We're building it every day - and we'd love your help.) WHAT'S IN IT FOR YOU: Trust, ownership, and the opportunity to grow Be part of a company grounded in customer focus, sustainability leadership, innovation, and social impact. We aim to Meet Needs Beyond Tomorrow Be part of an industry shift that makes a difference - in how people live, cook, clean, care, and serve Plus: country-specific perks and benefits designed to support your well-being. WHAT YOU'LL BE DOING: Must be able to perform all functions of the basic assembler classification. Assemble parts into mechanical and/or electrical sub-assemblies, and/or assembles components and subassemblies into a final product. Prepare units for shipments by cleaning, performing final touch up operations, minor rework, adding accessories, and packing. Responsible for monitoring levels of component parts needed at their workstation to maintain production and report as needed. May need to operate small hand tools and use fixtures to accomplish tasks. Responsible for producing a quality product. Ability to assemble parts consistently with assigned time allowances Assist Line Lead to ensure line is flowing with no bottlenecks or stoppages Must be able to teach basic assembly to new hires Must be able to proficiently assemble multiple product lines which may include refrigeration assembly. Must report all accidents/injuries to department supervisor immediately. Prompt and regular attendance. ADDITIONAL RESPONSIBILITIES: Additional duties as assigned by your supervisor. Follow all safety rules, policies and procedures. Keep work area clean, neat and orderly

At International, we don't just build trucks-we build careers. As a leader in sustainable transportation, we offer a dynamic environment where innovation, inclusion, and personal growth are at the forefront. Our team members are empowered through comprehensive benefits, including competitive compensation, comprehensive health coverage, work-life balance programs, financial benefits, and company-paid beneficiary plans. We foster a culture that celebrates diversity and inclusion, with employee resource groups supporting various communities. Whether you're just starting out or looking to advance your career, International provides the resources and opportunities to help you succeed. Join us and be part of a team that's driving the future of transportation. We're looking for dedicated team members who share our core values-Customer First, Team Spirit, Respect, Responsibility, and Eliminating Waste. Our frontline team members are the heart of our business: they're the first to represent our brand, the driving force behind our daily operations, and the key to delivering quality and value to our customers. When you join the front lines at International, you're not just taking a job-you're stepping into a vital role that powers everything we do. Role Description: Fabricate and assemble parts, pieces, and products using various tools and equipment. Emphasis on quality, accuracy, and attention to detail. Facility: Cutting-edge automated facility with climate control. Schedule: Monday - Thursday 1st Shift: 6:30 AM - 5:00 PM 2nd Shift: 7:30 PM - 6:00 AM Benefits: Start on Day One! Includes a generous PTO plan that includes Paid Personal Days and Vacation and 12 Paid Holidays. Medical, Dental, Vision, Short Term Disability, Long Term Disability, 401(K) Plan, Up to 16 weeks of Paid Parental Leave, Tuition Reimbursement, Company Discounts and much more. Starting Pay: $21.26 to $28.88 per hour in a two year grow in 6% Shift Differential for 2nd Shift Team Members Quarterly Incentive Program Opportunities for Advancement: Opportunities for career advancement into leadership, administrative roles, quality assurance, and skilled trades. Responsibilities Responsibilities include but are not limited to: * Assemble Engine and Powertrain Components: Obtain incoming components and assemble products according to process instructions, performing all necessary gauge verifications. * Quality and Productivity: Perform duties to maintain quality and productivity standards. * Support Team Objectives: Replace or assist others as needed to meet uptime objectives. * Team Participation: Actively participate in the work group and business team. * Continuous Improvement: Strive for continual improvement and focus on process optimization. * Guidance and Training: Instruct, assist, and direct others as required. * Compliance: Ensure compliance with process instructions, PFMEA, and Control Plans; notify group leader of any deviations. * Accountability: Accept accountability for achieving goals and planning strategies. Minimum Requirements * High School Diploma or GED equivalent Additional Requirements * Qualified candidates, excluding current employees, must be legally authorized on an unrestricted basis (US Citizen, Legal Permanent Resident, Refugee or Asylee) to be employed in the United States. We do not anticipate providing employment related work sponsorship for this position (e.g., H-1B status) * Physical Requirements (Ability to do the following up to 10 hours per shift): * Walk, stand, sit, bend, twist/turn, kneel, squat, crawl * Climb using both legs and arms * Head/neck movement * Reach outward or above the shoulder * Lift, carry, push, or pull 15-45 pounds * Repetitive use of hands and fingers * Use of vibrating tools * Exposure to constant and intermittent noise, fumes, smoke and gases, solvents, paint, grease and oils, radiant energy, and slippery surfaces * Must be willing to work any shift Desired Skills * Positive attitude, ethics and International values which support our company's values, and a healthy, high performance culture * At least two years of prior manufacturing experience * At least six months' experience interpreting assembly build instructions * Customer focus and drive for results Benefits and Compensation We provide a competitive total rewards package which ensures job satisfaction both on and off the job. We offer market-based compensation, health benefits, 401(k) match, tuition assistance, EAP, legal insurance, an employee discount program, and more. You can learn more about our comprehensive benefits package at ******************************************** Company Overview ABOUT TRATON With its brands Scania, MAN, International, and Volkswagen Truck & Bus, TRATON SE is the parent and holding company of the TRATON GROUP and one of the world's leading commercial vehicle manufacturers. The Group's product portfolio comprises trucks, buses, and light-duty commercial vehicles. "Transforming Transportation Together. For a sustainable world.": this intention underlines the Company's ambition to have a lasting and sustainable impact on the commercial vehicle business and on the Group's commercial growth. ABOUT INTERNATIONAL From a one-man company built on the world-changing invention of the McCormick reaper in 1831, to the 15,000-person-strong company we are today, few companies can lay claim to a history like International. Based in Lisle, Illinois, International Motors, LLC* creates solutions that deliver greater uptime and productivity to our customers throughout the full operation of our commercial vehicles. We build International trucks and engines and IC Bus school and commercial buses that are as tough and as smart as the people who drive them. We also develop Fleetrite aftermarket parts. In everything we do, our vision is to accelerate the impact of sustainable mobility to create the cleaner, safer world we all deserve. As of 2021, we joined Scania, MAN and Volkswagen Truck & Bus in TRATON GROUP, a global champion of the truck and transport services industry. To learn more, visit ********************** * International Motors, LLC is d/b/a International Motors USA in Illinois, Missouri, New Jersey, Ohio, Texas, and Utah. EEO Statement We are an Equal Opportunity Employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics. If you are a qualified individual with a disability and require a reasonable accommodation to access the online application system or participate in the interview process due to your disability, please email ********************* to request assistance. Kindly specify Job Requisition Number / Job Title and Location in response. Otherwise, your request may not be considered.

Job Description Furniture Assembly Tech Flexible, Part-Time Opportunity to service Your Local Office Supply Store Do you have experience assembling furniture at Office Supply Stores or similar organizations doing handy work? We want you on our team! SFS, Inc. is seeking skilled Independent Contractors to service Office Supply Stores on-site furniture showrooms, ensuring displays are set up properly and well-maintained. In-house customer assembly projects are also available. Why Join Us? Set Your Own Schedule - Work when and how often you want Be Your Own Boss - Enjoy the freedom of independent contracting Competitive Pay $16.75-$18 per hour for in-store showroom service Piece-rate pay for assembly jobs (earn more based on efficiency) DailyPay Option - Get paid the next day (free registration required) What You'll Need: Prior experience in merchandising and/or commercial furniture assembly Ability to follow client instructions and assemble products (RTA) correctly Understanding of plan-o-grams and ability to complete category resets Physical capability to lift up to 50 lbs., bend, and stand for extended periods Reliable transportation (some travel required) Personal tools for assembly work Internet access and an active email address Same-day reporting of completed work Ready to Get Started? Applying is quick and easy-Click Apply Now! SFS, Inc. is a leading supplier of field services to Fortune 1000 manufacturers and retailers in the U.S. We contract retail merchandising, auditing, installation and assembly projects in almost every zip code in the country, including Puerto Rico and the Virgin Islands. Our services are critical to sustaining the retail industry and our team of professionals are responsible for advancing it. Follow us on Social Media! Instagram: SFS Instagram Facebook: SFS Facebook Linkedin: SFS Linkedin

Furniture Assembly Tech Flexible, Part-Time Opportunity to service Your Local Office Supply Store Do you have experience assembling furniture at Office Supply Stores or similar organizations doing handy work? We want you on our team! SFS, Inc. is seeking skilled Independent Contractors to service Office Supply Stores on-site furniture showrooms, ensuring displays are set up properly and well-maintained. In-house customer assembly projects are also available. Why Join Us? Set Your Own Schedule - Work when and how often you want Be Your Own Boss - Enjoy the freedom of independent contracting Competitive Pay $16.75-$18 per hour for in-store showroom service Piece-rate pay for assembly jobs (earn more based on efficiency) DailyPay Option - Get paid the next day (free registration required) What You'll Need: Prior experience in merchandising and/or commercial furniture assembly Ability to follow client instructions and assemble products (RTA) correctly Understanding of plan-o-grams and ability to complete category resets Physical capability to lift up to 50 lbs., bend, and stand for extended periods Reliable transportation (some travel required) Personal tools for assembly work Internet access and an active email address Same-day reporting of completed work Ready to Get Started? Applying is quick and easy-Click Apply Now! SFS, Inc. is a leading supplier of field services to Fortune 1000 manufacturers and retailers in the U.S. We contract retail merchandising, auditing, installation and assembly projects in almost every zip code in the country, including Puerto Rico and the Virgin Islands. Our services are critical to sustaining the retail industry and our team of professionals are responsible for advancing it. Follow us on Social Media! Instagram: SFS Instagram Facebook: SFS Facebook Linkedin: SFS Linkedin We can recommend jobs specifically for you! Click here to get started.

Job DescriptionWorkers will be putting parts together such as agricultural machinery, following specific instructions and procedures. They use a variety of tools, including hand tools, power tools, and torque wrenches, to fasten components. Assemblers must be able to interpret technical blueprints and schematics to understand the correct assembly process. A strong understanding of mechanical principles is often required. The job involves physically demanding tasks and requires standing for long periods.

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at ******************** Notice: Know Your Rights: Workplace Discrimination is Illegal Notice: Pay Transparency Nondiscrimination (English) Aviso: Transparencia en el Pago No Discriminación (Spanish) Job Description: Airbus Mobile Manufacturing Site (MMS) is looking for an Aircraft Structures Assembler to join our production team in Mobile, AL. Meet the Team: The team at the Airbus U.S. Manufacturing facilities help assemble the finest aircraft in the world, along two (soon to be three) production lines for the A220 and A320 Family aircraft. On the shop floor you'll be surrounded by individuals who are passionate about aviation and skilled in areas like electrical, structure and quality. Join our team and help build the next generation of aircraft. Your Working Environment: Nearby on ‘Airbus Way' you will find the Airbus U.S. Manufacturing Facility for commercial aircraft. Opened at the Mobile Aeroplex at Brookley in 2015, the facility produces A320 Family aircraft and added a second product line for the A220 in 2019. The facility, which strengthens the U.S. aerospace industry, is part of Airbus' strategy to enhance its global competitiveness by meeting the growing needs of its customers in the United States and beyond. How We Care for You: Financial Rewards: Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan (“ESOP”) Work/Life Balance: Paid time off including personal time, holidays and a generous paid parental leave program. Health & Welfare: Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan (“EAP”) and other supplemental benefit coverages. Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility. Your Challenges: Position Summary: Responsible for the structural installation of parts and major components in the manufacturing of the aircraft within the assigned station area. Primary Responsibilities: ● Perform repair work (concessions/discrepancies). ● Positioning and assembly of components. ● Rework of external skin damage of the aircraft. ● Work in compliance with production orders, design documents, concessions and inspection procedures. ● Prepare and solve queries, ensure follow-up and give feedback. ● Examine and sort work orders and drawings. ● Prepare job station for daily activity. ● Perform other duties as assigned. Qualified Experience / Skills / Training: Education: Required: High school diploma or GED. The ability to successfully complete the following trainings provided by Airbus after recruitment: ■ Health & Safety ■ General aircraft familiarization ■ Quality trainings Preferred: Training from a vocational school or previous employer in the use of application tools and in application techniques. Experience: Required: 2 years minimum experience in Aviation Production or equivalent Previous hands-on experience with drilling tools, templates, drilling machines, fasteners, and torqueing tools Preferred: 5+ years minimum experience in Aviation Production Knowledge, Skills, Demonstrated Capabilities: ● Knowledge of station safety, quality (clean as you go/FOD) and OSHA regulations. Communication Skills: ● Effective verbal and written communication skills. Technical Systems Proficiency: ● Able to enter, generate and retrieve information using a computer (SAP and Excel knowledge required) Physical Requirements: Vision: adequate to enter and read material on computer screens. Able to identify individuals to initiate greetings, the giving of directions and other business interactions Hearing: able to hear sufficiently to engage in conversation in office settings. Able to hear safety alerts and warning signals. Speaking: able to engage in conversations in person and via electronic means and deliver information to groups of varying size with or without amplification. Equipment Operation: Able to operate a wide range of tools and equipment including hydraulic lifts and arms. Carrying: able to occasionally carry up to 20lbs/9kg while engaging in training, addressing production issues or as part of continuous improvement projects. Lifting: able to occasionally lift up to 30lbs/14kg. Pushing/Pulling: able to push/pull items in office areas. Sitting: able to sit for extended periods of time at the computer and in meetings. ∙ Squatting/Kneeling: Able to occasionally squat or kneel to retrieve or replace items shelved on bottom shelves. Confined Space: able to enter and exit a 12" x 22" passage and work through a 9.7" x 17.7" opening while using a respirator within a confined space for various lengths of time. Heights: able to work at heights of approximately 40 feet on various types of platforms and lifts for various lengths of time Standing: able to stand for extended periods of time delivering information. Travel: able to travel overseas and domestically sometimes for extended periods of time. Walking: able to walk through office and production areas, around flightline and airstrips and sometimes on uneven indoor and/or outdoor surfaces. Take your career to a new level and apply online now! This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Americas, Inc. Employment Type: US - Direct Hire Experience Level: Professional Remote Type: Job Family: Assembly & Integration ------ Job Posting End Date: 12.27.2025 ------ Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to ****************.

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at ******************** * Notice: Know Your Rights: Workplace Discrimination is Illegal * Notice: Pay Transparency Nondiscrimination (English) * Aviso: Transparencia en el Pago No Discriminación (Spanish) Job Description: Airbus Mobile Manufacturing Site (MMS) is looking for an Aircraft Structures Assembler to join our production team in Mobile, AL. Meet the Team: The team at the Airbus U.S. Manufacturing facilities help assemble the finest aircraft in the world, along two (soon to be three) production lines for the A220 and A320 Family aircraft. On the shop floor you'll be surrounded by individuals who are passionate about aviation and skilled in areas like electrical, structure and quality. Join our team and help build the next generation of aircraft. Your Working Environment: Nearby on 'Airbus Way' you will find the Airbus U.S. Manufacturing Facility for commercial aircraft. Opened at the Mobile Aeroplex at Brookley in 2015, the facility produces A320 Family aircraft and added a second product line for the A220 in 2019. The facility, which strengthens the U.S. aerospace industry, is part of Airbus' strategy to enhance its global competitiveness by meeting the growing needs of its customers in the United States and beyond. How We Care for You: * Financial Rewards: Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan ("ESOP") * Work/Life Balance: Paid time off including personal time, holidays and a generous paid parental leave program. * Health & Welfare: Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages. * Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility. Your Challenges: Position Summary: Responsible for the structural installation of parts and major components in the manufacturing of the aircraft within the assigned station area. Primary Responsibilities: ● Perform repair work (concessions/discrepancies). ● Positioning and assembly of components. ● Rework of external skin damage of the aircraft. ● Work in compliance with production orders, design documents, concessions and inspection procedures. ● Prepare and solve queries, ensure follow-up and give feedback. ● Examine and sort work orders and drawings. ● Prepare job station for daily activity. ● Perform other duties as assigned. Qualified Experience / Skills / Training: Education: Required: High school diploma or GED. The ability to successfully complete the following trainings provided by Airbus after recruitment: ■ Health & Safety ■ General aircraft familiarization ■ Quality trainings Preferred: Training from a vocational school or previous employer in the use of application tools and in application techniques. Experience: Required: 2 years minimum experience in Aviation Production or equivalent Previous hands-on experience with drilling tools, templates, drilling machines, fasteners, and torqueing tools Preferred: 5+ years minimum experience in Aviation Production Knowledge, Skills, Demonstrated Capabilities: ● Knowledge of station safety, quality (clean as you go/FOD) and OSHA regulations. Communication Skills: ● Effective verbal and written communication skills. Technical Systems Proficiency: ● Able to enter, generate and retrieve information using a computer (SAP and Excel knowledge required) Physical Requirements: * Vision: adequate to enter and read material on computer screens. Able to identify individuals to initiate greetings, the giving of directions and other business interactions * Hearing: able to hear sufficiently to engage in conversation in office settings. Able to hear safety alerts and warning signals. * Speaking: able to engage in conversations in person and via electronic means and deliver information to groups of varying size with or without amplification. * Equipment Operation: Able to operate a wide range of tools and equipment including hydraulic lifts and arms. * Carrying: able to occasionally carry up to 20lbs/9kg while engaging in training, addressing production issues or as part of continuous improvement projects. * Lifting: able to occasionally lift up to 30lbs/14kg. * Pushing/Pulling: able to push/pull items in office areas. * Sitting: able to sit for extended periods of time at the computer and in meetings. ∙ * Squatting/Kneeling: Able to occasionally squat or kneel to retrieve or replace items shelved on bottom shelves. * Confined Space: able to enter and exit a 12" x 22" passage and work through a 9.7" x 17.7" opening while using a respirator within a confined space for various lengths of time. * Heights: able to work at heights of approximately 40 feet on various types of platforms and lifts for various lengths of time * Standing: able to stand for extended periods of time delivering information. * Travel: able to travel overseas and domestically sometimes for extended periods of time. * Walking: able to walk through office and production areas, around flightline and airstrips and sometimes on uneven indoor and/or outdoor surfaces. Take your career to a new level and apply online now! This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Americas, Inc. Employment Type: US - Direct Hire Experience Level: Professional Remote Type: Job Family: Assembly & Integration * ----- Job Posting End Date: 12.27.2025 * ----- Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to ****************.

The Assembler I will assemble and inspect product to ensure the highest quality product is provided to our customer. This role requires a person that is self-motivated, has a strong attention to detail and a continuous improvement mindset. BENEFITS & PAY Pay based on skill and experience Health Insurance plus Dental & Vision coverage 401K Responsibilities • Complete basic product assembly according to engineering standards, diagrams and drawings. • Perform a variety of tasks ranging from repetitive to non-repetitive product assembly operations. • Complete shop floor traveler documents. • Conduct quality inspections on processing line in accordance with quality specifications. • May disassemble, modify, rework, reassemble and test experimental assemblies. • Keep working area safe, clean and organized. • May work in other areas of the facility, as needed. • Ability to lift and move up to 50 pounds of materials and requires standing and moving. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee frequently is required to reach with hands and arms and talk or hear. The employee is occasionally required to walk. PREFERRED QUALIFICATIONS High school diploma or general equivalency diploma (GED). Prior related work experience (1+ years) Ability to read and interpret blueprints Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals REQUIRED QUALIFICATIONS Must be able to read, write, and communicate in English Ability to define problems, collect data, establish facts, and draw and apply valid conclusions Regularly use hands to finger, handle, or feel objects, tools, or controls and reach with hands and arms Regularly lift and/or move up to 15 pounds, frequently lift and/or move up to 30 pounds, and occasionally lift and/or move up to 50 pounds. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. COMPANY OVERVIEW Boyd is the world's leading innovator in sustainable engineered material and thermal solutions that make our customers' products better, safer, faster, and more reliable. We develop and combine technologies to solve ambitious performance targets in our customers' most critical applications. By implementing technologies and material science in novel ways to seal, protect, cool, and interface, Boyd has continually redefined the possible and championed customer success for over 90 years. As a unique provider of innovative solutions, Boyd is in a multitude of industries such as aerospace, medical, consumer electronics and recreational vehicles to name only a few. We partner and serve some of the top organizations around the world. Our diversification and our global reach in the US, Asia and Europe, mean we offer many ways for you to grow and develop your career. We push the limits of your potential and provide you with the tools you need for a successful career. All Job Posting Locations (Location) Wetumpka Remote Type On-Site EEO Statement Boyd Corp is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All Job Posting Locations (Location) Wetumpka Remote Type On-Site EEO Statement Boyd Corp is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

CDL / Box Truck Drivers wanted for a Home Delivery Independent Contractor opening! SE independent is looking for dedicated Owner-Operator/Independent Contractors to manage their own businesses within a local region/delivery market. Successful candidates will be expected to perform home deliveries and set up of new furniture and accessories for the customer base of a premier national furniture retailer. While having an opportunity to be home every evening, a successful Independent Contractor can potentially generate $100-150k+ in annual gross revenue. Home Daily, Local Routes Day shift hours Outstanding earnings potential $140,000+ annually Deliver furniture to customers and businesses 1099 position, Owner Operator Must have one FULL year of box truck driving experience - OR - CDL A or B Additional perks of Box truck / CDL drivers with SEIDS Weekly settlements Direct deposit Work Description: Physically delivering furniture into customer's home Use a dispatch app, interact with customers, product handling & assembly, communicate as needed with dispatch/company representatives Verifiable CDL A, Driving Experience Owner Operator Background check Driving test Complete DOT Required drug and physical No recent DUI/DWI- 5 years 2 qualified helpers

Job DescriptionSalary: The Rough Fab Assembler (RFA) is responsible for assembling equipment in preparation for wiring, testing, and final assembly. The RFA will fulfill many roles within the process of assembling electronics equipment. The RFA will assemble off-the-shelf OEM equipment and will integrate custom panels and custom brackets to create unique assemblies per project needs. The RFA will receive shipments, distribute parts, organize parts by project, ship assemblies, maintain warehouse, maintain tools and equipment used in the process, and fulfill any other tasks as required by supervisors and management. Rough Fab Job Duties & Responsibilities Read and understand assembly drawings Ensure that all required parts for assembly are available Mark cutting lines and drilling holes on materials Confirm proper fitting and alignment of materials to be assembled Maintain production schedule Maintain clean and organized work area Clean and maintain tools Assemble parts in equipment racks Prepare packaged assemblies for shipment Receive packages Load and ship packages and assemblies Obey safety requirements Requirements Proven work experience as a Fabricator Good dexterity Attention to detail Good organizational skills Ability to lift 50 lbs. Clean work area and warehouse Drivers license with clean driving record Physical stamina Ability to read and comprehend assembly drawings Proficiency with operating the following hand tools: Drill Screw Gun Circular Saw Jigsaw Ability to operate a Fork Lift Good interpersonal skills EOE/M/F/Veteran/Disabled

Our company, Closet Factory, is the custom storage solution authority serving the worldwide need for custom space organization throughout the home. We design, sell and install custom closets, home offices, garages, home theaters, pantries, bookshelves and more. Our products are of the highest quality. We have been in business for over 40 years and have locations across the country. We have experienced substantial, long-term growth and as a result are searching for another member to add to our close-knit team of people to manufacture our products. Our factory produces all of the wood parts to our complete product line using the 32-millimeter system. Members of our factory prepare each job and check it for accuracy and quality before it is sent to the client's home. Job Benefits: * Full-time, permanent positions * Year round work * Best Training in the Industry * Continual Support * We have never had a lay-off in our entire history! * Climate Controlled Factory Specific requirements: * Experience with basic hand tools * Some woodworking experience a plus We recognize people as our most valuable asset and will train you to excel in your position. A future with Closet Factory has never been brighter. If you are thinking about taking the next big step in your career, this may be the opportunity you have been waiting for.

Job DescriptionDescription: SKILLS: Follow oral and written instructions Ability to multi-task Read cutting bills (blueprints) Read a tape measure Use of power tools such as nail gun and glue gun Basic math skills Carpentry is a plus PHYSICAL DEMANDS: Stand and walk for long periods of time Push, pull, and lift panels, doors, carts Some positions will require heavy lifting EQUIPMENT AND TOOLS USED: Basic hand tools Nail gun Glue gun PERSONAL PROTECTIVE EQUIPMENT USED: OSHA required and approved safety glasses, ear plugs, and safety glasses. Job Type: Full-time Pay: $16.21/hr Benefits: Medical, Dental, Vision Insurance Life insurance Paid time off Referral program Retirement plan Schedule: 10 hour shift 8 hour shift Monday to Friday Overtime Weekends as needed Ability to commute/relocate: Laurel, MS 39440: Reliably commute or planning to relocate before starting work (Required) Experience: Manufacturing: 1 year (Preferred) Mechanical knowledge: 1 year (Preferred) Shift availability: Day Shift (Required) Work Location: In person Requirements:

This role focuses on delivering exceptional craftsmanship in assembling copper bus and similar conductive materials using advanced installation techniques. Your work will directly contribute to superior quality, industry-leading cycle times, and cost efficiency. You will consistently represent the Point Eight Power brand, mission, and values in everything you do. Ready to take your career to the next level? Apply today and help us build the future of power solutions. Schedule: Monday to Friday 6AM to 2:30PM, must be available to work some Saturdays What You'll Do Assemble and install copper bus and conductive materials into electrical enclosures according to engineering drawings and schematics. Execute complex assemblies with precision, ensuring projects meet or exceed deadlines. Act as a subject matter expert, offering guidance, mentorship, and training to junior team members. Apply manufacturing expertise to interpret specifications, identify errors, and improve processes. Maintain a clean, safe, and organized work environment in compliance with safety and quality standards. Complete all necessary documentation, including Engineering Corrective Reports, Non-Conformance Reports, and Material Transfer Requests. Qualifications Education: High School Diploma or GED, Required. Experience: 1+ year assembling copper bus or similar conductive materials in a manufacturing environment, preferred. Skills & Abilities: Expertise in production processes, quality control, and mechanical assembly. Ability to read and interpret technical drawings and schematics. Strong problem-solving skills and attention to detail. Proficiency with hand tools, power tools, and specialized equipment. Excellent communication and teamwork skills. Ability to manage time effectively and work independently. Physical ability to lift up to 50 lbs and work in diverse manufacturing conditions. Physical Requirements Ability to sit, stand, climb, balance, stoop, kneel, crouch, and reach. Exposure to varying temperatures, electrical components, chemicals, and mechanical parts. Why Join Us? At Point Eight Power, you'll be part of a dynamic, high-performing team where your expertise directly impacts innovation, efficiency, and product excellence. We value craftsmanship, continuous improvement, and teamwork.

This person will be responsible for electrical assembly in a production environment. We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: **************************************************** Skills and Requirements High school diploma 3+ years as an Electrical assembler - IPC/WHMA-A-620 - ISO 9001 - NASA-STD-8739.4 (good, though not essential)

At Numotion, we're on a mission to improve the lives of people with disabilities. As North America's largest provider of mobility products and services, we deliver personalized solutions from manual and power wheelchairs to medical supplies and other assistive technologies that support health, independence, and everyday participation. We're committed to a workforce of diverse backgrounds and experiences and to an inclusive environment shaped by open dialogue, attentive listening, and tangible, ongoing action. JOB PURPOSE: The Production Technician is responsible for building complex rehab equipment based on the order specifications received from ATPs and assisting with other warehouse duties as needed. KEY RESPONSIBILITIES: Prepares equipment for delivery according to the order specifications. Assures the assembled equipment matches the order specifications. Assists with receiving as needed. Assists with maintaining an organized warehouse. Sustains a clean, organized and safe work environment in the shop/warehouse. Participates in physical inventory counts and reconciliation. Utilizes Numotion Leadership Principles to perform job with integrity, compliance, and values consistent with Numotion's mission. Adheres to employee and customer confidentiality and complies with Numotion's policies and federal regulations. Provides excellent customer service for all internal and external customers of the operations at all times. Provides solutions for customer concerns and continually focuses on customer service as our top priority. The above duties and responsibilities are not an all-inclusive list but rather a general representation of the duties and responsibilities associated with this position. The duties and responsibilities will be subject to change based on organizational needs and/or as deemed necessary by management. REQUIRED QUALIFICATIONS, SKILLS, AND EXPERIENCE: High School Diploma/GED in related field or an equivalent combination of education and directly relevant experience may be considered. One year experience in relevant mechanical experience. Basic computer skills (Word Processing, Email, Excel, and Internet). PREFERRED COMPETENCIES AND QUALIFICATIONS: Ability to work in a fast-paced environment and multitask. Proficient in using hand and power tools. Experience with assembly of medical equipment is a plus. Warehouse inventory is a plus. PHYSICAL WORK REQUIREMENTS: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Frequent use of hands, wrists, fingers associate with computer equipment. Prolonged periods of time working at a desk and/or on a computer. Occasionally move and reach with arms and hands. Ability to lift/move up to 50 pounds. Ability to communicate effectively. Ability to work overtime as needed. At Numotion, we offer competitive compensation packages, including medical, dental and vision insurance, short and long term disability, a 401k and life insurance. Numotion is an equal opportunity employer. We strive for a workplace that reflects the communities we serve and do not tolerate discrimination against our employees, customers and partners regardless of ethnicity, disability, gender identity, sexual orientation, religion, age, citizenship, marital or veteran status. Numotion is a drug-free workplace. Candidates are required to pass a drug test before beginning employment. Required Skills

START First DAY with PAID HOLIDAYS AND PAID Monthly PTOs (NO waiting) Has HVAC Building LIGHT Assembly JOBS **WILL TRAIN CALL M-F ********** 8am to 4pm for MORE Details SHIFTS: 2nd OR 3rd *Will TRAIN *NO Steel Toes = Full Shoe like Tennis Shoe/Sneaker, T-Shirt, Jeans Read and Write Skills Good Quality Work Background Check Paid Weekly *$14.25 = $570 Weekly*NO Rotating *VERY LITTLE OT Benefits: Holiday Pay, Vacation Pay, Medical, Dental, Retirement and more **Send Resume to Apply, THEN Call M-F 8AM to 4PM ************

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at ******************** Notice: Know Your Rights: Workplace Discrimination is Illegal Notice: Pay Transparency Nondiscrimination (English) Aviso: Transparencia en el Pago No Discriminación (Spanish) Job Description: Airbus US Manufacturing Facility is looking for at Aircraft Structures Assembler to join our Team based in Mobile, AL Meet the team: The team at the Airbus U.S. Manufacturing facilities assemble the finest aircraft in the world, along two (soon to be three) production lines for the A220 and A320 Family aircraft. On the shop floor you'll be surrounded by individuals who are passionate about aviation and skilled in areas like electrical, structure and quality. Join our team and help build the next generation of aircraft. Your working environment: Nearby on ‘Airbus Way' you will find the Airbus U.S. Manufacturing Facility for commercial aircraft. Opened at the Mobile Aeroplex at Brookley in 2015, the facility produces A320 Family aircraft and added a second product line for the A220 in 2019. The facility, which strengthens the U.S. aerospace industry, is part of Airbus' strategy to enhance its global competitiveness by meeting the growing needs of its customers in the United States and beyond. How we care for you: Financial Rewards: Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan (“ESOP”) Work/Life Balance: Paid time off including personal time, holidays and a generous paid parental leave program. Health & Welfare: Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan (“EAP”) and other supplemental benefit coverages. Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility. At Airbus, we support you to work, connect and collaborate more easily and accessibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking. Your challenges: Primary Responsibilities Perform repair work (concessions/discrepancies).• Positioning and assembly of components. Rework of external skin damage of the aircraft. Work in compliance with production orders, design documents, concessions and inspection procedures. Prepare and solve queries, ensure follow-up and give feedback. Examine and sort work orders and drawings. Prepare a job station for daily activity. Perform other duties as assigned. Your boarding pass: Required: 2 years minimum experience in Aviation Production or equivalent Previous hands-on experience with drilling tools, templates, drilling machines, fasteners, and torquing tools. Preferred: 5+ years minimum experience in Aviation Production. Physical Requirements: Vision: adequate to enter and read material on computer screens. Able to identify individuals to initiate greetings, the giving of directions and other business interactions Hearing: able to hear sufficiently to engage in conversation in office settings; Able to hear safety alerts and warning signals. Speaking: able to engage in conversations in person and via electronic means and deliver information to groups of varying size with or without amplification. Carrying: able to occasionally carry up to 20lbs/9kg while engaging in training, addressing production issues or as part of continuous improvement projects. Lifting: able to occasionally lift up to 30lbs/14kg. Pushing/Pulling: able to push/pull items in office areas and on the shop floor. Sitting: able to sit for extended periods of time at the computer and in meetings. Squatting/Kneeling: able to occasionally squat or kneel to retrieve or replace items shelved on bottom shelves. Standing: able to stand for extended periods of time delivering information. Travel/Mobility: able to travel overseas and domestically sometimes for extended periods of time and on short notice. Walking: able to walk through office and production areas, around flight line and airstrips and sometimes on uneven indoor or outdoor surfaces other business interactions Space Limitations: Working on jigs at the fuselage at a height of 15 feet. Take your career to a new level and apply online now! This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Americas, Inc. Employment Type: US - Direct Hire Experience Level: Entry Level Remote Type: On-site Job Family: Assembly & Integration ------ Job Posting End Date: 10.31.2025 ------ Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to ****************.