Assembly line worker jobs in Hacienda Heights, CA

W2 Contract (ongoing) Long Beach, CA Monday-Friday 6am-2:30pm $20/hr + Benefits. Weekly Pay! We're looking for a dedicated, detail-oriented, and dependable professional to help build high-quality products that make a difference. In this hands-on role, you'll be part of a collaborative production team focused on precision, efficiency, and excellence. This is a full-time, on-site position requiring your presence five days per week. What You'll Do Assemble and build products using various hand and power tools, including wire strippers, crimpers, drills, and soldering equipment. Inspect components for quality and report any defects or issues to production leads. Stay up to date with certifications and training across all assigned production lines. Record production details accurately and communicate any issues promptly. Follow all safety procedures and wear appropriate personal protective equipment (PPE). Take part in team training, continuous improvement efforts, and process optimization. Collaborate with teammates and assist in cross-functional production tasks. Maintain a clean, safe, and well-organized workspace. Support production goals by working additional shifts or overtime when needed. Perform other related duties as assigned. Required: High school diploma or equivalent. Previous experience in assembly or kitting/packaging. Ability to read and understand written and verbal instructions in English. Strong attention to detail and a proactive attitude. Excellent manual dexterity and hand-eye coordination. Comfortable standing, walking, and performing repetitive tasks for long periods. Ability to lift up to 50 lbs (with assistance as needed). Dependability, time management, and a commitment to quality work. Preferred: 1+ year of experience in a manufacturing or assembly environment. Familiarity with ISO 13485 or similar quality management systems. Knowledge of lean manufacturing or continuous improvement principles. Work Environment Fast-paced manufacturing setting with exposure to machinery, tools, and varying temperatures. Requires frequent bending, twisting, lifting, pulling, and standing throughout the shift. Regular use of inspection tools and materials handling equipment. Compliance with all safety standards and use of required PPE at all times.

Job Posting Start Date 12-04-2025 Job Posting End Date Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a/an Low Voltage Switchgear Assembler in USA, Fontana Ca. Reporting to the Production Manager, Low Voltage Switchgear Assembler is responsible for assembling fabricated metal parts for switchgear cabinets according to specifications. What a typical day looks like: Review, analyze, and follow various blueprints, diagrams, drawing, procedures, and work instructions to complete assemblies for enclosure buildings Mechanical assembly of components for switchgear cabinets Uses various power tools and hand tools (ex. Drills, impacts, screwdrivers, grinders, etc.) to accomplish assigned tasks Conduct quality assurance checks to confirm that assembled products meet specifications and quality standards Identify any product defects; record and report them accordingly Monitor and maintain inventory of necessary supplies, tools, and parts in workstation Maintain a clean and safe work area Perform all other duties as assigned The experience we're looking to add to our team: High School Diploma or equivalent 0-2 years of related experience in assembly or manufacturing setting Prior experience operating powered equipment (forklift, reach truck, scissors lift, overhead crane, etc.) Strong attention to detail and ability to perform work accurately Knowledge of manufacturing, equipment maintenance, and safety management Reading comprehension skills with the ability to interpret and follow written directions, blueprints, wiring drawings, schematics, and engineering diagrams Basic math skills to meet technical specifications and measurements Basic understanding of tools (ex. Tape measure, impact drill, etc.) Demonstrated proficiency with the ability to safely operate powered equipment (forklift, reach truck, scissors lift, overhead crane, etc.) What the physical requirements are: Prolonged periods of standing, bending, kneeling, and performing repetitive tasks. Must be able to lift, push, pull up to 35 pounds at a time. Must have manual dexterity in order to assemble products or machines as directed. Must have excellent hand-eye coordination. Ability to differentiate between colored wires, tabs, and electronic components. Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to California)$17.98 USD - $24.27 USD HourlyJob CategoryOperations Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).

The Optical Assembly Technician is responsible for the precise assembly, alignment, and testing of optical components and systems. This position requires a strong attention to detail, excellent manual dexterity, and the ability to work with microscopes and fine tools in a lab environment. The technician will follow technical drawings, and work instructions to ensure product quality and performance standards are met. Primary Duties & Responsibilities Assemble optical components (lenses, mirrors, prisms, filters) into mechanical housings using specialized tools and adhesives. Perform precision alignment of optical assemblies using alignment fixtures and laser alignment systems. Inspect optical components for defects such as scratches, chips, and coating flaws using microscopes and interferometers. Handle and clean optics using industry-standard procedures (e.g., use of IPA, lint-free wipes, static control tools). Read and interpret engineering drawings, work orders, and process instructions. Conduct performance tests on finished assemblies using optical testing equipment. Record test results and maintain accurate production and quality documentation. Collaborate with engineering and quality assurance teams to resolve issues and improve processes. Maintain a clean and organized work area, following all contamination control protocols. Follow safety and ESD (electrostatic discharge) guidelines at all times. Education & Experience High school diploma or equivalent; technical certificate or associate degree in optics, electronics, or related field preferred Minimum of 2 years of experience in optical or precision assembly, or relevant hands-on technical experience Skills Proficiency using microscopes, tweezers, torque drivers, and other fine assembly tools Strong hand-eye coordination and manual dexterity Ability to follow detailed work instructions and technical drawings Basic computer skills for data entry and documentation Preferred Skills Experience working in a cleanroom or controlled environment Familiarity with ISO standards and quality systems Knowledge of laser safety and optical coatings Working Conditions Work is performed in a lab environment with strict contamination controls May require use of PPE such as gloves, cleanroom attire, and safety glasses Physical Requirements Requires sitting or standing for extended periods and working with small parts. Safety Requirements All employees are required to follow the site EHS procedures and Coherent A&D EHS standards. Quality and Environmental Responsibilities Depending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System. Culture Commitment Ensure adherence to company's values (ICARE) in all aspects of your position at Coherent A&D: Integrity - Create an Environment of Trust Collaboration - Innovate Through the Sharing of Ideas Accountability - Own the Process and the Outcome Respect - Recognize the Value in Everyone Enthusiasm - Find a Sense of Purpose in Work Coherent A&D is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. This role involves access to technology, materials, software, or hardware subject to U.S. export control laws. Therefore, to be considered, candidates must be classified as a “U.S. Person” under applicable regulations or be eligible for authorization under a U.S. government export license. If you need assistance or an accommodation due to a disability, you may contact us at ****************************** .

This position requires the assembling of parts according to instructions and within a specific time frame, while using the appropriate tools and/or equipment according to safety and quality standards, as well as carrying out any other duties as directed by the Leadman or Supervisor. ESSENTIAL FUNCTIONS Read, interpret and follow basic blueprints, diagrams, engineering drawings, specifications, bills of materials, and other written instructions or procedures to accurately assemble equipment and products Perform quality work checks to insure the product meets quality standards Identify product defects and complete appropriate documentation when defects are identified Perform all work in accordance with quality standards and established safety procedures Maintain a clean and safe work area Assembling units as directed by the trainer, Lead or Supervisor with quality in mind in a specified time frame. Performed adjustments needed to ensure factory settings and specifications using schematics and/or engineering documentation. Must be able to lift up to 25 pounds. Must be able to climb up ladders. May be required to work beyond normal business hours when necessary. Supporting company policies and procedures, goals and objectives, ISO policies, and good manufacturing practices. NON-ESSENTIAL FUNCTIONS Regularly perform repetitive tasks Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus Ability to perform work accurately and thoroughly Ability to use thinking and reasoning to solve a problem and to think in such a way as to produce a new concept or idea Demonstrate commitment to an Injury-Free Environment through own actions and mentoring others. Communicate and enforce corporate environmental, health, and safety program. Fill out forms, as need. REPORTING RELATIONSHIP Laser Supervisor Laser Lead SUBORDINATE STAFF None KNOWLEDGE Forklift and Overhead Crane Preferred. Be able to use the metric system. Must be a good communicator. Must be able to use Hand Tools and Power Tools. Must have assembly experience. Enthusiastic, cooperative, and positive behavior. ISO experience a plus. SKILLS High attention to detail and self-motivation skills Basic reading skills. Must be able to follow directions Basic computer navigation and utilization skills Must be able to use addition, subtraction, multiplication and division. Must be able to work in a team and follow deadlines. Must have good leadership and communication skills. WORK SCHEDULE 10/4 Schedule Monday - Thursday 6:00am - 5:00pm PAY RANGE $24.00-$26.00/HR EDUCATION and QUALIFICATION High School education preferred. MENTAL Ability to accept and follow instructions. Being open to feedback from peers, Leadman and Supervisor. Realize one's own limitations and seek assistance when needed.

This position is responsible for the assembly and leak testing of UHP equipment, which includes but is not limited to: working in clean room, glove box operation, assembly, testing, inventory control, and data entry. Must be able to read blueprints and follow work instructions. * Performs other duties as assigned * Complies with all policies and standards QUALIFICATIONS Work Experience Experience Experience Details Required/ Preferred 1-3years 4-6years 7-9 years Knowledge, Skills and Abilities * PHYSICAL DEMANDS/WORKING CONDITIONS Physical Demands Category: Physical Demands A thorough completion of this section is needed for compliance with legal standards such as the Americans with Disabilities Act. The physical requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Physical Demand N/A Rarely Occasionally Frequently Constantly Weight Stationary Position Move/Traverse Stationary Position/Seated Transport/Lifting Transport/Carrying Exerting Force/Pushing Exerting Force/Pulling Ascend/Descend Balancing Position Self/Stooping Position Self/Kneeling Position Self/Crouching Position Self/Crawling Reaching Handling Grasping Feeling Communicate/Talking Communicate/Hearing Repetitive Motions Coordination Compensation: $23 per hour The Company is an Equal Opportunity Employer that complies with the laws and regulations set forth under EEOC.. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. EOE AA M/F/VET/Disability

About the Company: DwyerOmega is a globally trusted leader in manufacturing innovative instrumentation solutions for the Process Measurement, Automation, Control and HVAC markets. With very strong brand recognition and high levels of customer loyalty, DwyerOmega has an unmatched reputation for providing customized solutions that meet and exceed customer needs. Our team of engineering experts help our customers select technical, and often configured, product solutions for their unique applications. The company offers over 300,000 state-of-the-art products for process measurement and control of temperature, humidity, pressure, strain, force, flow, level, pH, conductivity, and indoor air quality, and is a recognized global leader in the digital marketing of technical products. The products that we manufacture are used to control and drive process efficiency, creating safe and sustainable environments. At DwyerOmega, we enable our customers to improve the world - one measurement at a time. We achieve this through our unwavering commitment to technology, customer service, and overall continuous improvement. Every day, we strive to cultivate a culture of ingenuity, empowerment, accountability, adaptability, and speed. The company's corporate headquarters are based in Michigan City, Indiana, and Norwalk, CT with manufacturing locations and sales offices located throughout the world. Analytical Industries: Analytical Industries is a leading provider of advanced gas analysis and measurement solutions for industrial, medical, and environmental applications. We take pride in our engineering excellence, precision manufacturing, and commitment to helping customers achieve accurate, reliable process control. As part of the DwyerOmega family, we bring together decades of instrumentation expertise and customer-focused innovation. Position Summary: The Assembler is responsible for assembling, wiring, soldering, testing, and inspecting small electro-mechanical components used in sensor and analyzer products. This position requires close attention to detail, steady hands, and adherence to established quality and safety standards. Working under the direction of the Lead or Production Manager, the assembler follows detailed assembly instructions, performs accurate and repetitive work, and supports overall production efficiency. The role also includes maintaining a clean and organized work area and performing all other duties as assigned. Responsibilities include the following. Other duties may be assigned. * Assemble electrochemical sensors and electromechanical analyzers, and related subcomponents according to engineering drawings, schematics, and work instructions. * Perform wiring, soldering, and mechanical assembly using hand tools and electronic testing equipment. * Log production results, nonconformities and test outcomes accurately in manufacturing documents such as the DHR. * Inspect components before assembly for defects or non-conformance. * Maintain a clean and organized work area in accordance with safety and 5S practices. * Collaborate with engineering and quality teams to identify assembly issues and propose process improvements. * Follow all company policies related to safety, quality assurance, and environmental compliance. Requirements Essential/Preferred Skills: * 1-2 years of work experience in electro-mechanical assembly, preferably in sensor instrument manufacturing. * High school diploma or GED equivalent. * Ability to read and interpret drawings, schematics, and work instructions. * Prior experience with hand tools. * Strong attention to detail and commitment to product quality. Work Conditions and Physical Requirements: * Work performed primarily in an office/manufacturing space. * Frequent sitting, standing, bending, and using small tools. * May involve handling chemicals used in assembly rooms. * Use of PPE (gloves, safety glasses) as required. * May require repetitive motions to maintain quality of sensor/analyzer products.

The Assembler I has ownership of the assembly stations assigned. They are responsible for safety, efficiency, quality, and overall productivity. The Assembler I will be expected to perform basic and intermediate assembly processes at within the department. ESSENTIAL JOB FUNCTIONS Follow a prism-based schedule. Ability to properly assemble basic and intermediate components within the Roto department which includes but is not limited to cleaning parts, tapping inserts, bolting and/or using self-tapping screws to secure components to main body part. Order and control hardware and ensure all is inventory is accounted for. Ability to recognize and follow departmental quality guidelines. Perform all aspects of product packaging including boxing, labeling, taping, stapling and stacking cartons using established pallet patterns. Knowledge of using basic hand and power tools. Maintains a personal efficiency rating in accordance with Key Performance Targets not to fall below 100%. Willing to cross train as needed in all the assembly cells which include non-Foam line, Ingredient Bin line, LCD line, Ferry 11-line, Bus Cart line, Kits, Packs, Food Bar & FSG line, Routing, Re-box area. Print labels using computers and proper application methods. Perform FG (finished goods) transactions with all associated labeling requirements. Follow all established assembly procedures and work instructions. Access the ESP program via computer. Ability to follow verbal assembly instructions and repeat processes. Adjusting to different work assignments throughout the workday. Maintain reliable and consistent attendance, including being punctual, and dependable in order to meet the needs of the department and the organization. Execute each essential duty satisfactorily in order to perform job successfully. Follows all safety procedures required in work area, wears PPE as needed, attends all safety meetings, and reports safety issues regarding equipment or unsafe/hazardous conditions. Performs effectively as a team member, able to work well with others, open to receive and give feedback, and treats everyone with respect. Takes ownership of own work and behavior, accepts accountability for own actions, encourages solutions, and communicates status of work/projects. Follow all department quality standards/criteria. Raise concerns and issues to immediate manager. Able to understand and demonstrate Cambro company culture, display company core values (Safety, Quality, Respect, and Service). Understands department's key performance indicators and contributes to achieve these goals both individually and as a team. Other duties as needed or required. ADDITIONAL RESPONSIBILITIES Must be able to work overtime as needed, remain flexible and open to possible schedule changes in order to meet business needs. REQUIRED QUALIFICATIONS The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High school diploma or general education degree (GED); and one-year related experience and/or training; or equivalent combination of education and experience. Ability to communicate in English, both verbally and in writing. Comprehend instructions and communicate effectively. Ability to read and interpret documents such as safety rules and procedure manuals. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. PREFERRED QUALIFICATIONS ERP system experience with Prism, Intermec, and/or AS400 system Bilingual in Spanish. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sitting, walking, standing, bending at the neck, bending at the waist, squatting, climbing, kneeling, crawling, twisting at the neck and waist, repetitive use of hands, simple grasping, power grasping, fine manipulation, pushing and pulling, reaching above and below the shoulder, carrying/lifting up to 50 lbs. Driving cars, trucks, forklifts and other equipment Working around equipment and machinery Exposure to excessive noise Exposure to dust, gas, fumes or chemicals Working at heights Use of special visual or auditory protective equipment Walking on uneven ground Operation of foot controls or repetitive foot movement Risk of exposure to bio-hazard while working such as: bloodborne pathogens, sewage, hospital waste, etc. PPE REQUIREMENTS Safety glasses Utility gloves Steel-toe slip-resistant shoes Hardhat Hearing protection (e.g. ear plugs, ear muffs) Face shields Face covering (mask) in accordance with company policy. Mfg Assembler- ROTO COMPENSATION RANGE: $17.40 - $17.50 Salary may vary based on experience. CAMBRO is proud to be an equal-opportunity workplace. All qualified applicants will receive consideration for employment without regard to and will not be discriminated against based upon race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic information, military or veteran status, or other characteristics protected by law.

When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation's premier propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States. Applications for this position will be accepted until 11/24/2025. Posting Job Summary (Purpose): The Utility Worker primarily works in the outside production area of the AmeriGas Cylinder Exchange facility. The employee is responsible for the processing of cylinders (20 lb. barbeque grill cylinders). Key Characteristics: Models a commitment to safety through his/her own day-to-day behavior; follows company safety procedures and policies Demonstrates high professional and personal standards; has a commitment to quality, timeliness, and continuous improvement Ability to function effectively as a member of a production team Duties and Responsibilities: Sort, inspect, clean, paint, label, and refill empty cylinders. Maintain a safety focus at all times and wear the proper PPE Ensure the consistent quality of cylinders are being processed Load filled cylinders onto the truck(s) for the next day's shipments. Ability to stand and walk 8 - 12 hours per day. Ability to lift 50 pounds repeatedly throughout the day. Perform general housekeeping duties. Knowledge, Skills and Abilities: Ability to follow processes, procedures, and instructions Ability to function effectively as a member of a production team Willingness to grow and learn Basic mechanical aptitude Basic computer knowledge Work in a fast-paced environment Be able to stand 8-10 hours per day Ability to obtain required state licensing Ability to be forklift certified Education and Experience Required: 1 - 2 years work experience in manufacturing is preferred High School Diploma or GED Working conditions: Environmental conditions such as wind, rain, ice, and snow may affect this job, as the production area where the employee spends most of the workday is not enclosed. AmeriGas Propane, Inc. is an Equal Opportunity Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices. AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis. The pay for this position ranges from $18.00 to $19.00 , depending on circumstances including an applicant's skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Additional compensation may include eligibility to earn a performance-based bonus or commissions on completed sales depending on position. This is the Company's good faith and reasonable estimate of the range of compensation for this position as of the time of posting. The Company offers a wide array of comprehensive benefit programs and services including medical, dental, vision, flexible spending and health savings accounts to our benefits-eligible employees. Additional benefits include retirement savings plans like 401(k) and paid days off such as parental leave, military leave, vacation/paid time off, sick leave in compliance with state law, as applicable, paid holidays, and disability coverage. Some benefits offerings are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works.

Essential Function Examples: Identifies and assembles bearings completely after method of assembly has been established and after inspection of parts has been completed. On non-complex bearings, interprets blueprints and specification sheets to determine requirements for the bearing or component part. Sets up standard mechanical and air gages to check bearing components, and partially and/or completely assembled bearings for conformance to standards. Receives instructions from supervisor or designated individual on how to maintain complex inspection equipment. Secures first article inspection to verify set-up and continues to check the parts for conformance to standard throughout the course of the run. At the completion of the run, the incumbent obtains inspection buyoff before going to the next job. Uses mathematics involving decimals and fractions to operate inspection equipment, check tolerances and fit up of bearings. Must be able to use tables and charts to assist in the use of mathematics. Follows assembled bearings to assure they are packed according to specifications and are physically shipped when requested to do so by the supervisor. Identifies and assembles bearings completely after method of assembly has been established and after inspection of parts has been completed. On non-complex bearings, interprets blueprints and specification sheets to determine requirements for the bearing or component part. Sets up standard mechanical and air gages to check bearing components, and partially and/or completely assembled bearings for conformance to standards. Receives instructions from supervisor or designated individual on how to maintain complex inspection equipment. Secures first article inspection to verify set-up and continues to check the parts for conformance to standard throughout the course of the run. At the completion of the run, the incumbent obtains inspection buyoff before going to the next job. Uses mathematics involving decimals and fractions to operate inspection equipment, check tolerances and fit up of bearings. Must be able to use tables and charts to assist in the use of mathematics. Follows assembled bearings to assure they are packed according to specifications and are physically shipped when requested to do so by the supervisor. Experience: High school diploma or general education degree (GED), and a minimum of one year of experience in precision bearing assembly using a variety of precision checking techniques. Knowledge/Skills/Abilities: Competence to interpret blueprints and decipher documents such as safety rules, operating and/or procedure manuals. Competence to use standard measuring equipment. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graph. Special Requirements: Some overtime may required, including weekends. How to Apply: To apply, please submit your resume highlighting your relevant experience and interest in the role, you may also email your resume to ************************** or call our front office at **************. We look forward to hearing from you! Pay Range: $17 to $23 per hour **Please note that the salary range information is only applicable to California. This range is the company's good faith and reasonable estimate of the compensation for this role based on the position's responsibilities, qualifications, experience, and other relevant factors. Actual compensation may vary depending on the selected candidate's specific experience, education, skills, and other relevant factors. Equal Opportunity Employer Industrial Tectonics Bearings is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, disability, or veteran status. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a US citizen, lawful permanent resident [“green card” holders] or have refugee or asylee status.

Immediate Opportunity: Assembly Worker- Wheelchair Manufacturing in Torrance, CA, Must have manufacturing background. Assembly - Chair Dresser Pay Rate: $17.87 per hour Hours: 6:00 AM to 2:30 PM Key Requirements: Must have at least 1 year assembly experience Must have experience working in a production environment Must be able to lift up to 50lbs Must be computer literate Must have experience using power tools Must be able to read blueprints & read assembly instructions Must e responsibe, reliable, dependable and trainable Must have a sense of urgency Qualifications: 1+ years experience in medical device or similar regulated industry (electronics, aerospace, pharma) Dependable and eager to learn Strong work ethic and reliability Bilingual preferred but not required/ Must understand English #HSSB

Temp To Full-Time Skillset Group is seeking a Wire Harness Assembler to work in the Irvine, CA area. This position will under shop supervision the Inspect and perform work in accordance with IPC-A610 and other quality standards as needed. This will be a 1st shift position and will be contract to hire. To apply email: ************************* Pay: $30-$33/hr,

Job DescriptionDescription: : Union Rescue Mission (URM) is a 501(c)(3) nonprofit organization located in the Los Angeles Metropolitan Area. We are dedicated to serving men, women, and children experiencing homelessness and providing comprehensive emergency and long-term services to help them escape the dangerous streets of Skid Row. Established in 1891, URM is now one of the largest rescue missions of its kind in the United States and the oldest in Los Angeles. Join us at Union Rescue Mission as we bring hope and share the compassion of Christ to those devastated by homelessness. POSITION SUMMARY: Under the supervision of the Thrift Store Manager, the Thrift Store Production Worker is responsible for assisting the production crew in cleaning, prep, and tagging merchandise such as bric-a-brac, books, electronics, shoes, accessories, household items, etc. WORK PRINCIPLE: Colossians 3:23 is the foundation of URM's standard for employment, “Whatever you do, work at it with all your heart, as though you were working for the Lord and not for people.” The goal for each employee is to enrich and sustain a humble heart attitude; to enrich and sustain a mindset of serving others, treating them with kindness and truth; and to enrich and sustain a zealous desire for achieving work objectives without any ulterior motives or agendas. THRIFT STORE FLOOR PRODUCTION WORKER ESSENTIAL FUNCTIONS: Cleans, tags, and packs merchandise for pricing. Determines which items are perishable and which are recyclable and discards unsellable items. Assists other departments/positions, as needed. Sets the pace for sorting. Records production numbers daily. (i.e., carts, units, etc.) Communicates regularly with management about store issues. Actively engages customers on floor sales to increase donations and merchandise sales. Ensures monthly revenue goals are met. Provides excellent customer service by greeting and assisting customers and donors; and responds to customer inquiries/complaints in a timely manner. Ensures store and displays are maintained, clean, and attractive. Maintains safety including all Health and Security policies and procedures. Conducts tasks and other projects as assigned by the Store Manager. Commitment to URM mission, vision, and core values. Encourages guests in their faith and growth in Jesus Christ. PHYSICAL DEMANDS: In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to allow differently able individuals to perform the essential functions of the job. Must be able to lift 50 lbs. Requires manual dexterity for regular repetitive finger motion such as frequent reaching, pulling, pushing, and lifting objects and operating equipment. Requires manual ability to operate a pallet jack. May be exposed to handling hazardous materials such as broken glass. WORK ENVIRONMENT: In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to allow differently able individuals to perform the essential functions of the job within the environment. The office is clean, orderly, properly lighted, and ventilated. This position works predominantly indoors in a store, warehouse, or dock environment all of which are high traffic settings involving people, equipment and/or machinery. May be exposed to dust in the performance of certain duties. Noise levels are considered moderate to high. Requires regular standing, walking, sitting, crouching, stooping, speaking, hearing, and seeing. May be exposed to extreme temperatures both hot and cold (variable weather). Requirements: EXPERIENCE/ EDUCATION/LICENSURES/CERTIFICATIONS: High school diploma or equivalent, required. Thrift store, warehouse, assembly line or restaurant experience, a plus. WORKER KNOWLEDGE/ SKILLS/ ABILITIES: Fluency in Spanish, both verbal and written, a plus. Ability to demonstrate a strong work ethic. Perform in a fast-paced environment and possess strong organizational skills. Ability to determine the value of donations. Must exhibit strong customer service skills. Clear communication skills, both written and oral. Excellent time management skills and detail oriented. Ability to multi-task in a high-volume environment. Must be an effective team member. Must be able to work a flexible schedule, including weekends.

Individual Contributor in charge of performing, within his / her area of technological specification, tasks in the manufacturing process in accordance with the manufacturing documentation and the time allocated, using the resources available (including conventional and/or digital machine tools) and inspects his / her own work: Performs Manufacturing operations in accordance with the associated documentation and the time allocated, using the resources available Is responsible for complex work and rework at unit and component level Chooses and implements suitable methods, resources and procedures; Brings support to the operators; Initializes and manages continuous improvement actions in and around his/her area; Performs final inspection duties when requested in accordance with drawings, EOs and any other regulatory requirement pertaining to the product.

Benefits: * Medical / Health Benefits with multiple plan options, Flexible Spending Accounts, Dental and Vision * 401k * On the job training / cross-training * Life Insurance, disability insurance * Voluntary life insurance for family members available. * Accident and critical illness insurance optional. * Scheduled performance reviews * Referral program Job Description: Job Core Responsibilities: * Performs a range of routine mechanical and/or electromechanical assembly of small parts or components in accordance with company instructions and procedures * Reviews shop traveler route card, or uncomplicated schematic drawings to confirm correct sequence of operation * Position very small parts such as ceramic board, crystals, gages, fine pins, fire wire, solder particles and epoxy under binocular microscope using tweezers or positioning fixtures * Adjusts, bends, aligns and solders fine wires to resistors and base parts * Bonds or seals parts or assemblies with epoxies using direct heating elements or ovens and performs a variety of in-process testing * Demonstrates all safety policies and procedures * Other responsibilities as assigned * Regular, consistent and punctual attendance is required. May need to work nights and weekends, variable schedule(s) and additional hours as necessary Job Specifications: Education: A Secondary Certificate/High School Diploma or equivalent combination of relevant education and work experience that will allow successful performance of job expectations is preferred. Certifications: Vocational training, apprenticeships or the equivalent experience in related field Years Experience: 0-2 years of relevant experience Skills: * Good mechanical aptitude * Able to operate a variety of hand tools and light machinery * Capable of performing basic mathematics * Ability to read and interpret company documents, such as safety rules, operating/manufacturing instructions, policies and procedure * Good manual dexterity required to work with small parts * Able to problem-solve using existing procedures to perform straightforward tasks * Effective oral, written and interpersonal skills Must Haves (Required): Cable or electronic background Nice to Haves: RF testing on network analyzers, soldering

The Optical Assembly Technician is responsible for the precise assembly, alignment, and testing of optical components and systems. This position requires a strong attention to detail, excellent manual dexterity, and the ability to work with microscopes and fine tools in a lab environment. The technician will follow technical drawings, and work instructions to ensure product quality and performance standards are met. Primary Duties & Responsibilities * Assemble optical components (lenses, mirrors, prisms, filters) into mechanical housings using specialized tools and adhesives. * Perform precision alignment of optical assemblies using alignment fixtures and laser alignment systems. * Inspect optical components for defects such as scratches, chips, and coating flaws using microscopes and interferometers. * Handle and clean optics using industry-standard procedures (e.g., use of IPA, lint-free wipes, static control tools). * Read and interpret engineering drawings, work orders, and process instructions. * Conduct performance tests on finished assemblies using optical testing equipment. * Record test results and maintain accurate production and quality documentation. * Collaborate with engineering and quality assurance teams to resolve issues and improve processes. * Maintain a clean and organized work area, following all contamination control protocols. * Follow safety and ESD (electrostatic discharge) guidelines at all times. Education & Experience * High school diploma or equivalent; technical certificate or associate degree in optics, electronics, or related field preferred * Minimum of 2 years of experience in optical or precision assembly, or relevant hands-on technical experience Skills * Proficiency using microscopes, tweezers, torque drivers, and other fine assembly tools * Strong hand-eye coordination and manual dexterity * Ability to follow detailed work instructions and technical drawings * Basic computer skills for data entry and documentation * Preferred Skills * Experience working in a cleanroom or controlled environment * Familiarity with ISO standards and quality systems * Knowledge of laser safety and optical coatings Working Conditions * Work is performed in a lab environment with strict contamination controls * * May require use of PPE such as gloves, cleanroom attire, and safety glasses Physical Requirements * Requires sitting or standing for extended periods and working with small parts. Safety Requirements All employees are required to follow the site EHS procedures and Coherent A&D EHS standards. Quality and Environmental Responsibilities Depending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System. Culture Commitment Ensure adherence to company's values (ICARE) in all aspects of your position at Coherent A&D: Integrity - Create an Environment of Trust Collaboration - Innovate Through the Sharing of Ideas Accountability - Own the Process and the Outcome Respect - Recognize the Value in Everyone Enthusiasm - Find a Sense of Purpose in Work Coherent A&D is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. This role involves access to technology, materials, software, or hardware subject to U.S. export control laws. Therefore, to be considered, candidates must be classified as a "U.S. Person" under applicable regulations or be eligible for authorization under a U.S. government export license. If you need assistance or an accommodation due to a disability, you may contact us at ******************************.

About the Company: DwyerOmega is a globally trusted leader in manufacturing innovative instrumentation solutions for the Process Measurement, Automation, Control and HVAC markets. With very strong brand recognition and high levels of customer loyalty, DwyerOmega has an unmatched reputation for providing customized solutions that meet and exceed customer needs. Our team of engineering experts help our customers select technical, and often configured, product solutions for their unique applications. The company offers over 300,000 state-of-the-art products for process measurement and control of temperature, humidity, pressure, strain, force, flow, level, pH, conductivity, and indoor air quality, and is a recognized global leader in the digital marketing of technical products. The products that we manufacture are used to control and drive process efficiency, creating safe and sustainable environments. At DwyerOmega, we enable our customers to improve the world - one measurement at a time. We achieve this through our unwavering commitment to technology, customer service, and overall continuous improvement. Every day, we strive to cultivate a culture of ingenuity, empowerment, accountability, adaptability, and speed. The company's corporate headquarters are based in Michigan City, Indiana, and Norwalk, CT with manufacturing locations and sales offices located throughout the world. Analytical Industries: Analytical Industries is a leading provider of advanced gas analysis and measurement solutions for industrial, medical, and environmental applications. We take pride in our engineering excellence, precision manufacturing, and commitment to helping customers achieve accurate, reliable process control. As part of the DwyerOmega family, we bring together decades of instrumentation expertise and customer-focused innovation. Position Summary: The Assembler is responsible for assembling, wiring, soldering, testing, and inspecting small electro-mechanical components used in sensor and analyzer products. This position requires close attention to detail, steady hands, and adherence to established quality and safety standards. Working under the direction of the Lead or Production Manager, the assembler follows detailed assembly instructions, performs accurate and repetitive work, and supports overall production efficiency. The role also includes maintaining a clean and organized work area and performing all other duties as assigned. Responsibilities include the following. Other duties may be assigned. Assemble electrochemical sensors and electromechanical analyzers, and related subcomponents according to engineering drawings, schematics, and work instructions. Perform wiring, soldering, and mechanical assembly using hand tools and electronic testing equipment. Log production results, nonconformities and test outcomes accurately in manufacturing documents such as the DHR. Inspect components before assembly for defects or non-conformance. Maintain a clean and organized work area in accordance with safety and 5S practices. Collaborate with engineering and quality teams to identify assembly issues and propose process improvements. Follow all company policies related to safety, quality assurance, and environmental compliance. Requirements Essential/Preferred Skills: 1-2 years of work experience in electro-mechanical assembly, preferably in sensor instrument manufacturing. High school diploma or GED equivalent. Ability to read and interpret drawings, schematics, and work instructions. Prior experience with hand tools. Strong attention to detail and commitment to product quality. Work Conditions and Physical Requirements: Work performed primarily in an office/manufacturing space. Frequent sitting, standing, bending, and using small tools. May involve handling chemicals used in assembly rooms. Use of PPE (gloves, safety glasses) as required. May require repetitive motions to maintain quality of sensor/analyzer products. Salary Description $18-$20

Preferred Job Qualifications: Previous experience in aerospace manufacturing or related industries familiarity with inspection processes and basic quality standards Ability to perform polishing and cleaning and packaging with attention to detail. Forklift certification or proven forklift operating experience. Ability to safely lift and move materials as required. Strong organizational and time management skills valid driver's license with a clean driving record Ability to follow written and verbal instructions accurately. Commitment to safety protocols and workplace cleanliness Strong teammate skills with the ability to work independently when needed. Physical and Mental Requirements: Able to lift 25 pounds regularly. Ability to sit or stand for extended periods. Must be adaptable to a constantly changing environment and perform well under deadlines. Experience and Education: Previous experience in a similar role is preferred but not required. Must demonstrate the ability to learn and apply new skills effectively. We are looking for motivated individuals who can contribute to our team-oriented environment and handle the demands of a high-paced production setting. Please note that this job description is not exhaustive. Management reserves the right to add, modify, change, or rescind work assignments or different positions and to make reasonable adjustments to ensure qualified employees can perform the essential functions of the job. Hourly Rate of Pay: $18.00/ hour to $20.00/ hour **Please note that the salary range information is only applicable to California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee's pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Equal Opportunity Employer: Western Precision Aero is an Equal Opportunity Employer and all employees of RBC are subject to E-Verity. Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident) or a Foreign Person for whom a license is obtained.

Job DescriptionDescription: : Union Rescue Mission (URM) is a 501(c)(3) nonprofit organization located in the Los Angeles Metropolitan Area. We are dedicated to serving men, women, and children experiencing homelessness and providing comprehensive emergency and long-term services to help them escape the dangerous streets of Skid Row. Established in 1891, URM is now one of the largest rescue missions of its kind in the United States and the oldest in Los Angeles. Join us at Union Rescue Mission as we bring hope and share the compassion of Christ to those devastated by homelessness. POSITION SUMMARY: Under the supervision of the Thrift Store Manager, the Thrift Store Production Worker is responsible for assisting the production crew in cleaning, prep, and tagging merchandise such as clothing, books, electronics, shoes, accessories, household items, etc. CORE WORK PRINCIPLE: Colossians 3:23 is the foundation of URM's standard for employment, “Whatever you do, work at it with all your heart, as though you were working for the Lord and not for people.” The goal for each employee is to enrich and sustain a humble heart attitude; to enrich and sustain a mindset of serving others, treating them with kindness and truth; and to enrich and sustain a zealous desire for achieving work objectives without any ulterior motives or agendas. THRIFT STORE FLOOR PRODUCTION WORKER ESSENTIAL FUNCTIONS: Cleans, tags, and packs merchandise for pricing. Determines which items are perishable and which are recyclable and discards unsellable items. Assists other departments/positions, as needed. Sets the pace for sorting. Records production numbers daily. (i.e., carts, units, etc.) Communicates regularly with management about store issues. Actively engages customers on floor sales to increase donations and merchandise sales. Ensures monthly revenue goals are met. Provides excellent customer service by greeting and assisting customers and donors; and responds to customer inquiries/complaints in a timely manner. Ensures store and displays are maintained, clean, and attractive. Maintains safety including all Health and Security policies and procedures. Conducts tasks and other projects as assigned by the Thrift Store Manager/Supervisor. Commitment to URM mission, vision, and core values. Encourages guests in their faith and growth in Jesus Christ. THRIFT STORE FLOOR PRODUCTION WORKER PHYSICAL DEMANDS: In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation(s) may be made to allow differently able individuals to perform the essential functions of the job. Must be able to lift 50 lbs. Requires regular standing, walking, sitting, crouching, stooping, speaking, hearing and seeing. Requires manual dexterity for regular repetitive finger motion such as frequent reaching, pulling, pushing, and lifting objects and operating equipment. Requires manual ability to operate a pallet jack. May be exposed to handling hazardous materials such as broken glass. THRIFT STORE FLOOR PRODUCTION WORKER WORK ENVIRONMENT: In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. Reasonable accommodation(s) may be made to allow differently abled individuals to perform the essential functions of the job within the environment. The office is clean, orderly, properly lighted, and ventilated. This position works predominantly indoors in a store, warehouse, or dock environment all of which are high traffic settings involving people, equipment and/or machinery. May be exposed to dust in the performance of certain duties. Noise levels are considered moderate to high. May be exposed to extreme temperatures both hot and cold (variable weather). Requirements: THRIFT STORE FLOOR PRODUCTION WORKER EXPERIENCE/ EDUCATION/LICENSURES/CERTIFICATIONS: High school diploma or equivalent, required. Thrift store, retail store, warehouse, assembly line or restaurant experience, a plus. THRIFT STORE FLOOR PRODUCTION WORKER KNOWLEDGE/ SKILLS/ ABILITIES: Fluency in Spanish, both verbal and written, a plus. Ability to demonstrate a strong work ethic. Perform in a fast-paced environment and possess strong organizational skills. Ability to determine the value of donations. Must exhibit strong customer service skills. Clear communication skills, both written and oral. Excellent time management skills and detail oriented. Ability to multi-task in a high-volume environment. Must be an effective team member. Must be able to work a flexible schedule, including weekends.

Temp To Full-Time Skillset Group is seeking a Wire Harness Assembler to work in the Irvine, CA area. This position will under shop supervision the Inspect and perform work in accordance with IPC-A610 and other quality standards as needed. This will be a 1st shift position and will be contract to hire. To apply email: *************************