Assembly line worker entry level jobs - 33 jobs

**Job ID:** 113185 DRS RADA Technologies, a subsidiary of Leonardo DRS, is focused on proprietary radar solutions and legacy avionics systems supporting the defense industry globally. The company is a global pioneer of AESA tactical radars for active military protection, counter-drone applications, critical infrastructure protection, and border surveillance. **Job Responsibilities** + Perform entry-level assembly functions, which may include: prep, mechanical , harness, cable, printed circuit board sub-assemblies, spray application, and inspection, typically working from models and/or drawings, within Production + Perform simple assemblies and hardware installation screws, washers, nuts and have basic understanding of build documentation + Perform pull-test and verify tooling, use torque tools and have the ability to interpret & assemble multiple units in dept Basic troubleshooting + Responsible and accountable for producing quality work to prescribed standards, with a focus on continuous improvement to meet customer commitments on schedule and within budget + Follow written work instructions must maintain a safe work environment by adhering to all safety procedures including those which govern the handling of materials, chemicals, tools, and equipment (WHMIS) + Properly use required PPE + May participate in LEAN Events, "Six S" activities, action teams etc + Support, communicate, reinforce and defend the mission, values and culture of the organization + Maintain a safe work environment by adhering to all safety procedures including those which govern the handling of materials, chemicals, tools, and equipment (WHMIS) + Must be able to access production tools (routers, parts list, work instructions, etc) and be able to wire prep, auto bond, sleeving **Qualifications** + High school diploma or GED **Preferred Qualifications** + Experience in System Integration or Fabrication U.S. Citizenship required. _The salary range for this position is $17.65/hour - $21.56/hour. This range reflects the good faith estimate of pay the employer is willing to offer at the time of posting. Several factors can influence the pay scale, including but not limited to: Federal contract labor categories and contract wage rates, collective bargaining agreements, geographic location, business considerations, scope, and responsibilities of the position, local or other applicable market conditions, and internal equity. Other factors include the candidate's qualifications such as prior work experience, specific skills and competencies, education/training, and certifications. In addition to base pay, employees may be eligible for: annual performance-based bonuses, equity awards, and overtime pay (for non-exempt employees as applicable. Our benefits package includes comprehensive health insurance (medical, dental, vision), employer matching 401(k) retirement plan, paid time off including vacation, holidays, and sick leave (including ant state-mandated paid sick leave), parental leave benefits, tuition reimbursement, professional development support, and life and disability insurance coverage._ _Taking care of our people is a top priority at Leonardo DRS. We are proud to offer competitive salaries and comprehensive benefits, including medical, dental, and vision coverage, a company contribution to a health savings account, telemedicine, life and disability insurance, legal insurance, and a 401(k) savings plan. We champion wellness programs that focus on physical, emotional, and financial well-being. We develop our talent by offering programs and activities to support career-growth, professional development, and skill enhancement. And we understand there is more to life than work, and the importance of offering flexible work schedules with our 9/80 program, competitive vacation, health/emergency leave, paid parental leave, and community service hours._ _*Some employees are eligible for limited benefits only_ _Leonardo DRS, Inc. and its subsidiaries provide equal opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, protected veteran status, or any other characteristic protected by federal, state, or local laws._

Job DescriptionProduction Worker | Entry Level 2nd Shift Production Worker - $14.50/hr - Sterling (near Dulles). Must have a reliable car; Metro stops before shift end. 3:30 pm-12:00 am, immediate start. 2nd Shift - $14.50 - 3:30PM-12:00AMIdeal for candidates commuting from Herndon / Manassas, free parking; no Metro access Must have:• Reliable personal transportation • Ability to commute to Sterling • Availability 3:30 pm-12:00 am Mon-Fri Looking to start or grow your career in food manufacturing? Join a global leader in high-quality prepared meals. We're hiring dedicated Food Prep Operators to support our 2nd shift production operations in Sterling, VA. If you're a reliable team player with a strong work ethic and attention to detail, we want to hear from you! Key Responsibilities: Assist in preparing high-quality meals using the sous vide cooking method Perform light assembly, packaging, and labeling of food items Operate manual and electric pallet jacks to move materials Follow all recipes, safety, and sanitation protocols Support inventory and materials handling tasks Clean and sanitize equipment and maintain a safe work area What We're Looking For: No experience required - training provided! Experience in warehouse, food production, or manufacturing is a plus Ability to lift up to 50 lbs and stand for extended periods Must be reliable, punctual, and willing to work overtime and weekends if needed Ability to follow written instructions and safety protocols Strong team spirit and positive attitude Perks & Benefits: Weekly pay Full-time, consistent schedule Health, dental, and vision insurance Opportunity for overtime pay Long-term job potential with room to grow Apply now and start working with a team that feeds the world with quality and care! Urgently Hiring Sterling VA jobs Jobs near Dulles Airport Northern Virginia warehouse jobs Loudoun County manufacturing jobs Entry-level jobs Sterling VA Jobs near 20166 Ashburn VA jobs Reston VA Jobs Leesburg VA production jobs Herndon warehouse jobs Manassas factory jobs food production jobs food manufacturing jobs factory worker jobs production operator jobs warehouse associate entry-level production light industrial jobs assembly line worker general labor jobs food prep operator manufacturing jobs no experience

Around the Clock Services is hiring Retail Assembly Technicians immediately for new merchandise displays in Sterling, Virginia. Benefits/Perks Day Shift Competitive Pay Career Advancement Minimal Supervision Employee Referral Program Job Summary Around the Clock Services is hiring Assembly Technicians for new products for display. You will be servicing our many retail chains, building bikes, grills, furniture & anything else they might request. Work independently as an In-Store Product Assembler with some of our biggest customers, like ACE Hardware, Cabela's, Lowe's, or Home Depot. Our technicians work diligently to keep the display area "showroom ready." This is an independent contractor position. Compensation is paid by the finished piece - therefore high energy, fast-paced individuals or teams are most successful. The faster and more accurately you work, the more money you'll make. Responsibilities will include: Provide quality assembly and repair of products and merchandise, using manufacturer instructions while adhering to retailer rules and guidelines. Check-in with Retailer management to confirm build list and inventory. Generate and complete invoices daily. Reports and communicates effectively to the Area Manager. Maintains a safe and clean workspace, leaving clients with a clean build area. Job Qualifications Must be at least 18 years old to apply. Basic hand tools, impact drill and Mechanical aptitude. Internet access via a smart phone or mobile device. Reliable transportation Willingness to travel within 25 miles of your location Capable of working on your feet for extended periods of time. Kneel, bend, twist and lift 50+ pounds repeatedly.

Assembler I is responsible for fabricating component parts or assembling the finished product according to the customer's specifications. Secures and maintains correct component parts and supplies required for the operation. Principle Duties and Responsibilities * Completes work area setup * Fits parts together in accordance with prescribed instructions and in accordance with quality standards * Operates hand tools as required to complete the assembly process * Stacks completed products in accordance with established procedures, and if required, may cover, label, and band components finished product * Ensures work area is safe, clean and organized, and that equipment is safe to operate * Completes pre-shift startup equipment inspection checklist and reports any problems or concerns * Maintains a clean and orderly work environment * Maintains production records as required * Checks materials and finished products to ensure they are compliant with standards * Performs duties consistent with established safety and quality procedures, rules, and standards * Participates in safety, CI, and other programs and meetings * Performs other duties as assigned Qualifications * High school diploma/GED preferred but not required * No minimum experience is required however, 6 months of manufacturing and assembling experience is preferred * Working knowledge of basic math preferred * Must be at least 18 years of age Click here to watch what a day in the life of an Assembler looks like. The Company is an Equal Opportunity Employer.

DRS RADA Technologies, a subsidiary of Leonardo DRS, is focused on proprietary radar solutions and legacy avionics systems supporting the defense industry globally. The company is a global pioneer of AESA tactical radars for active military protection, counter-drone applications, critical infrastructure protection, and border surveillance. Job Responsibilities * Perform entry-level assembly functions, which may include: prep, mechanical , harness, cable, printed circuit board sub-assemblies, spray application, and inspection, typically working from models and/or drawings, within Production * Perform simple assemblies and hardware installation screws, washers, nuts and have basic understanding of build documentation * Perform pull-test and verify tooling, use torque tools and have the ability to interpret & assemble multiple units in dept Basic troubleshooting * Responsible and accountable for producing quality work to prescribed standards, with a focus on continuous improvement to meet customer commitments on schedule and within budget * Follow written work instructions must maintain a safe work environment by adhering to all safety procedures including those which govern the handling of materials, chemicals, tools, and equipment (WHMIS) * Properly use required PPE * May participate in LEAN Events, "Six S" activities, action teams etc * Support, communicate, reinforce and defend the mission, values and culture of the organization * Maintain a safe work environment by adhering to all safety procedures including those which govern the handling of materials, chemicals, tools, and equipment (WHMIS) * Must be able to access production tools (routers, parts list, work instructions, etc) and be able to wire prep, auto bond, sleeving Qualifications * High school diploma or GED Preferred Qualifications * Experience in System Integration or Fabrication U.S. Citizenship required. The salary range for this position is $17.65/hour - $21.56/hour. This range reflects the good faith estimate of pay the employer is willing to offer at the time of posting. Several factors can influence the pay scale, including but not limited to: Federal contract labor categories and contract wage rates, collective bargaining agreements, geographic location, business considerations, scope, and responsibilities of the position, local or other applicable market conditions, and internal equity. Other factors include the candidate's qualifications such as prior work experience, specific skills and competencies, education/training, and certifications. In addition to base pay, employees may be eligible for: annual performance-based bonuses, equity awards, and overtime pay (for non-exempt employees as applicable. Our benefits package includes comprehensive health insurance (medical, dental, vision), employer matching 401(k) retirement plan, paid time off including vacation, holidays, and sick leave (including ant state-mandated paid sick leave), parental leave benefits, tuition reimbursement, professional development support, and life and disability insurance coverage. Taking care of our people is a top priority at Leonardo DRS. We are proud to offer competitive salaries and comprehensive benefits, including medical, dental, and vision coverage, a company contribution to a health savings account, telemedicine, life and disability insurance, legal insurance, and a 401(k) savings plan. We champion wellness programs that focus on physical, emotional, and financial well-being. We develop our talent by offering programs and activities to support career-growth, professional development, and skill enhancement. And we understand there is more to life than work, and the importance of offering flexible work schedules with our 9/80 program, competitive vacation, health/emergency leave, paid parental leave, and community service hours. * Some employees are eligible for limited benefits only Leonardo DRS, Inc. and its subsidiaries provide equal opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, protected veteran status, or any other characteristic protected by federal, state, or local laws. Our Vision. To be the leading mid-tier defense technology company in the U.S. Our Values. The Leonardo DRS culture is defined by our Core Values and Principles: * Integrity * Agility * Excellence * Customer Focus * Community & Respect * Innovation We strive to uphold them in all aspects of our business practices to inspire our employees and provide outstanding support for our customers. Nearest Major Market: Washington DC

PURPOSE The Assembler I is an entry-level position that performs repetitive assembly operations to mass-produce products such as windows, doors, trusses, panels, or stairs by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES Places parts in specified relationship to each other. Bolts, clips, screws, cements, or otherwise fastens parts together. Cut products to specific measurements as needed. Removes defective products as needed. Tends machines to perform force fitting or fastening operations on assembly line. Works at different workstations as production needs require. Works in environment where tasks change as varying models of product are produced. Other duties may be assigned. SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. MINIMUM REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. There are no requirements in terms of education or experience. Prior carpentry experience helpful. COMPETENCIES Ability to read and comprehend simple instructions. Ability to write simple correspondence. Verbal expression ability to effectively present information, in both individual and small group situations. Ability to add, subtract, multiply, and divide. Ability to read tape measure. Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. WORK ENVIRONMENT / PHYSICAL ACTIVITY The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is continuously required to stand; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is continuously required to walk. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must continuously lift and /or move up to 25 pounds, frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this job, the employee is continuously exposed to moving mechanical parts and may be exposed to airborne particles. The employee is frequently exposed to outside weather conditions; extreme cold; extreme heat; risk of electrical shock and vibration. The noise level in the work environment is usually loud. Will be required to wear ear plugs for noise protection as well as eye protection and other personal protective equipment required by the location.

Candidates must be local to the Manassas, VA area. Contract with "opportunity" to convert to perm. Responsibilities Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables. Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions. Requirements Candidates must have some mechanical aptitude and mechanical assembly experience. Hand tool is experience is desired. Manual electronics solder experience desired. Must have HS diploma Internal use only: 13521-1

**Starting Pay:** $17-$18 We are seeking a detail-oriented and reliable Assembler I to work for a local client in Inwood, WV. In this role, you will be responsible for fabricating component parts or assembling finished products to meet our customers' specifications. The ideal candidate will have a strong attention to detail, a safety-conscious mindset, and the ability to work effectively in a team environment. You'll ensure all components are correctly assembled, while maintaining a clean and organized workspace. **Key Responsibilities:** + Set up your work area and prepare tools and materials for efficient assembly. + Assemble parts and components according to prescribed instructions and quality standards. + Use hand tools and other equipment as necessary to complete the assembly process. + Safely stack completed products and follow procedures for labeling, covering, and banding as required. + Ensure a clean and safe work environment by adhering to safety and cleanliness standards. + Perform a pre-shift equipment inspection and report any issues or concerns. + Maintain accurate production records and document any necessary information. + Inspect materials and finished products to ensure compliance with quality standards. + Follow established safety, quality, and procedural guidelines at all times. + Participate in safety, continuous improvement, and other company programs and meetings. + Perform additional duties as assigned by the supervisor. **Qualifications:** + High school diploma or GED is preferred but not required. + Previous experience in manufacturing or assembly is a plus (6 months preferred but not mandatory). + Basic math skills are preferred for measurements and assembly tasks. + Strong attention to detail and commitment to safety. + Ability to work effectively in a fast-paced, team-oriented environment. **Why Join Us?** + Opportunities for growth and development within the company. + A collaborative and supportive work environment. + Commitment to safety, quality, and employee well-being. If you're ready to take the next step in your career and make a meaningful impact, apply today! ManpowerGroup is committed to providing equal employment opportunities in a professional, high quality work environment. It is the policy of ManpowerGroup and all of its subsidiaries to recruit, train, promote, transfer, pay and take all employment actions without regard to an employee's race, color, national origin, ancestry, sex, sexual orientation, gender identity, genetic information, religion, age, disability, protected veteran status, or any other basis protected by applicable law.

PURPOSE This is an entry-level position that performs repetitive assembly operations to mass-produce products such as windows, doors, trusses, panels, or stairs by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES Places parts in specified relationship to each other. Bolts, clips, screws, cements, or otherwise fastens parts together. Cut products to specific measurements as needed. Removes defective products as needed. Tends machines to perform force fitting or fastening operations on assembly line. Works at different workstations as production needs require. Works in environment where tasks change as varying models of product are produced. Cleans equipment, floors, and work areas according to safety procedures. Other duties may be assigned. SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. MINIMUM REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. There are no requirements in terms of education or experience. Prior carpentry experience helpful. COMPETENCIES Ability to read and comprehend simple instructions. Ability to write simple correspondence. Verbal expression ability to effectively present information, in both individual and small group situations. Ability to add, subtract, multiply, and divide. Ability to read tape measure. Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Overtime work could be involved. WORK ENVIRONMENT / PHYSICAL ACTIVITY The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is continuously required to stand; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is continuously required to walk. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must continuously lift and /or move up to 25 pounds, frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this job, the employee is continuously exposed to moving mechanical parts and may be exposed to airborne particles. The employee is frequently exposed to outside weather conditions; extreme cold; extreme heat; risk of electrical shock and vibration. The noise level in the work environment is usually loud. Will be required to wear ear plugs for noise protection as well as eye protection and other personal protective equipment required by the location.

We are looking for self-motivated and safety-conscious candidates who would like to join our production team. New employees can earn 82k in total compensation when working at Canam Steel Corp for a 50-hour work week. This includes the base rate, shift differential, overtime, retention and production bonuses. There are additional ways to earn including referral bonuses and mentoring incentives. Position is full-time with benefits! 1st Shift Schedule Monday - Thursday 6:00AM-3:30PM / Friday 6:00AM-2:30PM / Saturday 6:00AM-12PM Plus occasional weekend availability needed Must be able to work all schedules Performs welding operations and related tasks such as gathering required parts, setting up materials for welding and welding joist products. Duties and Responsibilities: Performs production welding in a fast paced environment. Read and interpret weld symbols on shop drawings and blueprints. Ensures that all welds are complete and of good quality; repair bad welds as necessary. Maintains a positive, clean and orderly work environment. Performs daily cleaning and maintenance of area. Works in a safe and productive manner. Performs other job-related duties as assigned by supervisor including but not limited to; cleaning, steel scrap removal, and other production related jobs.

Seeking a highly skilled and motivated Workers Compensation Production Underwriter to join a team. This is an exciting opportunity to contribute to the growth and success of an organization by underwriting and pricing new and renewal Workers' Compensation accounts. The role involves building strong relationships with independent agencies, analyzing risk characteristics, and collaborating with internal teams to ensure account profitability. Compensation Package Salary: $110,000 - $155,000 per year (depending on experience) + bonus opportunities Competitive benefits package, 401(k), paid time off, professional development opportunities, etc. Responsibilities Underwrite and price new and renewal Workers' Compensation accounts within assigned authority levels. Build and maintain productive relationships with independent agencies across Maryland and Virginia. Analyze risk characteristics, loss experience, and coverage needs to determine appropriate terms and conditions. Collaborate closely with loss control and claims teams to ensure account profitability. Contribute to regional marketing and business development efforts. Mentor junior underwriters and share market expertise within the team. Travel within the assigned territory (Maryland/Virginia). Manage a book of business with a $3M - $4M annual new business goal. Qualifications/Requirements A minimum of 5 years of experience underwriting Workers' Compensation for an insurance carrier. Proven experience in production underwriting with a focus on acquiring new business. Familiarity with companies such as Accident Fund, The Hartford, CNA, Chesapeake, ICW, AmTrust, Travelers, and Liberty. Progression toward professional certifications such as AU, CPCU, CIC, INS, or ARM is preferred. Disclaimer: Please note that this job description may not cover all duties, responsibilities, or aspects of the role, and it is subject to modification at the employer's discretion. #LI-MW1

A bit about us Trek is an awesome place to work, with amazing benefits for all employees. We build only products we love, provide incredible hospitality to our customers, and change the world by getting more people on bikes. When you're on our team, you're taken care of, encouraged to learn and grow, and given lots of opportunities to do so. Give us your best, and we'll give it right back. Sound pretty sweet? Then come join us! Job Description The Bicycle Building position will assemble all bicycle sold at our retail locations. As new bicycles arrive at the store, the builder would be responsible for maintaining assembly schedules and quality inspections. A fast learning and excited individual would aid in proper inventory management to ensure that the sales staff was supplied accurate information regarding currently built product. Position Responsibilities Learn the proper Point of Sale practices that relate to bicycle building. Work directly with Service Managers to develop quality bicycle builds and expectations. Efficiently complete daily work schedules and tasks. Trek Benefits: • Flexible and fun company culture • 401(k) with match and Employee Stock Ownership Plans (ESOP) • Employee discounts on all product • Deep partner retail discounts We are an Equal Employment Opportunity (“EEO”) Employer. Trek strictly prohibits discrimination on the basis of race, color, creed, religion, gender, gender identity, pregnancy, marital status, partnership status, sexual orientation, age, national origin, veteran or military status, disability, medical condition, genetic information, or any other characteristic prohibited by federal, state and/or local laws. This policy applies to all aspects of employment, including hiring, promotion, demotion, compensation, training, working conditions, transfer, job assignments, benefits, layoff, and termination. We are an E-Verify employer. For more information, please click on the following links: E-Verify Participation Poster: English / Spanish E-Verify Right to Work Poster: English | Spanish

Job Description Furniture Assembly Technician Opportunity is part-time, on-going Assembly work for both in-store (Nationwide Office supply chain) and in-home furniture assembly. As an Independent Contractor with SFS, Inc. you will be assembling RTA Furniture but we also have great opportunities for those who possess experience with TV Wall Mounts, and assembling Gas Grills, Sporting Goods, Bicycles, and Display Racks. Let's get started as an independent contractor, it's quick & easy; CLICK APPLY Things to Consider: You control when and how much you work Create your work schedule Be your own BOSS What we Offer: Competitive pay DailyPay - work today, get paid tomorrow Things you should know: Must possess merchandising and/or commercial furniture assembly experience Ability to assemble products according to client's written instructions Able to understand plan-o-grams and perform customized category resets independently Able to carry and lift up to 50 lbs. Able to bend and stand for extended periods Internet access & active email address Report client work completions on the same day as service Reliable transportation, some travel involved Have own tools SFS, Inc. is a leading supplier of field services to Fortune 1000 manufacturers and retailers in the U.S. We contract retail merchandising, auditing, installation and assembly projects in almost every zip code in the country, including Puerto Rico and the Virgin Islands. Our services are critical to sustaining the retail industry and our team of professionals are responsible for advancing it. Follow us on Social Media! Instagram: SFS Instagram Facebook: SFS Facebook Linkedin: SFS Linkedin

Furniture Assembly Technician Opportunity is part-time, on-going Assembly work for both in-store (Nationwide Office supply chain) and in-home furniture assembly. As an Independent Contractor with SFS, Inc. you will be assembling RTA Furniture but we also have great opportunities for those who possess experience with TV Wall Mounts, and assembling Gas Grills, Sporting Goods, Bicycles, and Display Racks. Let's get started as an independent contractor, it's quick & easy; CLICK APPLY Things to Consider: You control when and how much you work Create your work schedule Be your own BOSS What we Offer: Competitive pay DailyPay - work today, get paid tomorrow Things you should know: Must possess merchandising and/or commercial furniture assembly experience Ability to assemble products according to client's written instructions Able to understand plan-o-grams and perform customized category resets independently Able to carry and lift up to 50 lbs. Able to bend and stand for extended periods Internet access & active email address Report client work completions on the same day as service Reliable transportation, some travel involved Have own tools SFS, Inc. is a leading supplier of field services to Fortune 1000 manufacturers and retailers in the U.S. We contract retail merchandising, auditing, installation and assembly projects in almost every zip code in the country, including Puerto Rico and the Virgin Islands. Our services are critical to sustaining the retail industry and our team of professionals are responsible for advancing it. Follow us on Social Media! Instagram: SFS Instagram Facebook: SFS Facebook Linkedin: SFS Linkedin

New Openings for Display Assembly Technician in Sterling, Virginia Do you feel like your last year has been wasted at a dead-end job? Their schedule takes up the best hours of your day - the long shifts accompanied by traffic are taking all the time away from your kids. It doesn't have to be this way, you know… Do you prefer working alone? Do you hate sitting still all day? Are you looking for a fast-paced, hands-on job? If you are, joining our team as a retail merchandise assembler may be a good fit for you. We have several positions in NoVa open, including Sterling, VA. Get hired fast! We have immediate openings available for in-store merchandise assembly technicians in Sterling, Virginia. We are currently looking for candidates that can start within the next week. Assemblers wanted in NoVA, Sterling, VA. Responsibilities Read and comprehend instructions and follow established procedures Collect all material and equipment needed to begin the process Take precision measurements to ensure perfect fit of components Select or modify components according to measurements and specifications Align material and put together parts to build more complex units Check output to ensure highest quality Maintain merchandise in good condition Keep records of production quantities and time Report on issues, malfunction, or defective parts Check company toolbox application for assembly quantities and timeframes Maximize customer interest and sales levels by displaying products appropriately Around the Clock Services is hiring Retail Assembly Associates immediately in Alexandria and the entire NoVa area. You will be servicing our many retail chains, building wheelbarrows, outdoor gas grills, patio furniture & much more. After training there is an opportunity to work as an In-Store Merchandise Assembler with some of our biggest customers, like Lowe's, Home Depot, ACE Hardware, Wal-Mart and more. Skills Proven experience as assembler Technical knowledge and ability to read blueprints, drawings etc. Good understanding of quality control principles Good communication skills (verbal and written) Excellent hand-eye coordination and physical condition Advanced knowledge of hand and power tools. Heavy lifting is required (up to 80lbs repeatedly and daily). Can work steadily, with accuracy, precision, and speed Must be able to stand, squat, and bend over for long periods of time. Can follow directions in the assembly of required products Must be mechanically inclined and meet productivity standards Able to solve unforeseen challenges while assembling various consumer products Must be self-motivated, energetic, and work well alone. You must have good technical knowledge and possess great manual dexterity. Ability to read instructions represented in manuals, drawings, schematics etc. and follow them with precision is extremely important. Work Requirements Must be 18 years of age or older. Must have reliable transportation. Must have a working mobile phone. Must have access to the internet. Must be available to be in the store at 9a, M-F Must have valid identification Flexible availability (weekends as needed) Tool Requirements Impact drill (at least 2 batteries) Assorted bits and adapters for drill Basic hand tools - screwdriver, wrench, sockets, box cutter Smartphone or Smart Device with WIFI or Mobile internet This is an independent contractor position. This job is based completely on piecework. Compensation is paid by the finished piece - in which each assembler gets paid for each item they build. The pay rate for each finished item varies on the level of difficulty. The faster and more accurately you work, the more money you make. NOTE: Upon hire you will be a W-4/I-9, 1099 independent contractor. We will have our local regional manager discuss the process of the piece rate pay and answer any questions you may have. The Company will consider qualified applicants with arrest and conviction records. This position requires you to be able to drive between store locations. You must be willing and able to travel to various customer sites. Once fully trained (approx. 1-2 weeks, paid training), you will be out on the road, traveling to and working at our customer sites. Travel time and scheduling needs may vary. FLEXIBLE SCHEDULES - WEEKLY PAY - IMMEDIATE OPENINGS - UNLIMITED EARNING POTENTIAL

PURPOSE This is an entry-level position that performs repetitive assembly operations to mass-produce products such as windows, doors, trusses, panels, or stairs by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES Places parts in specified relationship to each other. Bolts, clips, screws, cements, or otherwise fastens parts together. Cut products to specific measurements as needed. Removes defective products as needed. Tends machines to perform force fitting or fastening operations on assembly line. Works at different workstations as production needs require. Works in environment where tasks change as varying models of product are produced. Cleans equipment, floors, and work areas according to safety procedures. Other duties may be assigned. SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. MINIMUM REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. There are no requirements in terms of education or experience. Prior carpentry experience helpful. COMPETENCIES Ability to read and comprehend simple instructions. Ability to write simple correspondence. Verbal expression ability to effectively present information, in both individual and small group situations. Ability to add, subtract, multiply, and divide. Ability to read tape measure. Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Overtime work could be involved. WORK ENVIRONMENT / PHYSICAL ACTIVITY The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is continuously required to stand; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is continuously required to walk. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must continuously lift and /or move up to 25 pounds, frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this job, the employee is continuously exposed to moving mechanical parts and may be exposed to airborne particles. The employee is frequently exposed to outside weather conditions; extreme cold; extreme heat; risk of electrical shock and vibration. The noise level in the work environment is usually loud. Will be required to wear ear plugs for noise protection as well as eye protection and other personal protective equipment required by the location.

Furniture Assembly Technician Opportunity is part-time, on-going Assembly work for both in-store (Nationwide Office supply chain) and in-home furniture assembly. As an Independent Contractor with SFS, Inc. you will be assembling RTA Furniture but we also have great opportunities for those who possess experience with TV Wall Mounts, and assembling Gas Grills, Sporting Goods, Bicycles, and Display Racks. Let's get started as an independent contractor, it's quick & easy; CLICK APPLY Things to Consider: You control when and how much you work Create your work schedule Be your own BOSS What we Offer: Competitive pay DailyPay - work today, get paid tomorrow Things you should know: Must possess merchandising and/or commercial furniture assembly experience Ability to assemble products according to client's written instructions Able to understand plan-o-grams and perform customized category resets independently Able to carry and lift up to 50 lbs. Able to bend and stand for extended periods Internet access & active email address Report client work completions on the same day as service Reliable transportation, some travel involved Have own tools SFS, Inc. is a leading supplier of field services to Fortune 1000 manufacturers and retailers in the U.S. We contract retail merchandising, auditing, installation and assembly projects in almost every zip code in the country, including Puerto Rico and the Virgin Islands. Our services are critical to sustaining the retail industry and our team of professionals are responsible for advancing it. Follow us on Social Media! Instagram: SFS Instagram Facebook: SFS Facebook Linkedin: SFS Linkedin We can recommend jobs specifically for you! Click here to get started.

Around the Clock Services is hiring Retail Assembly Technicians immediately for new merchandise displays in Chantilly, Virginia. Benefits/Perks Day Shift Competitive Pay Career Advancement Minimal Supervision Employee Referral Program Job Summary Around the Clock Services is hiring Assembly Technicians for new products for display. You will be servicing our many retail chains, building bikes, grills, furniture & anything else they might request. Work independently as an In-Store Product Assembler with some of our biggest customers, like ACE Hardware, Cabela's, Lowe's, or Home Depot. Our technicians work diligently to keep the display area "showroom ready." This is an independent contractor position. Compensation is paid by the finished piece - therefore high energy, fast-paced individuals or teams are most successful. The faster and more accurately you work, the more money you'll make. Responsibilities will include: Provide quality assembly and repair of products and merchandise, using manufacturer instructions while adhering to retailer rules and guidelines. Check-in with Retailer management to confirm build list and inventory. Generate and complete invoices daily. Reports and communicates effectively to the Area Manager. Maintains a safe and clean workspace, leaving clients with a clean build area. Job Qualifications Must be at least 18 years old to apply. Basic hand tools, impact drill and Mechanical aptitude. Internet access via a smart phone or mobile device. Reliable transportation Willingness to travel within 25 miles of your location Capable of working on your feet for extended periods of time. Kneel, bend, twist and lift 50+ pounds repeatedly.

Now Hiring Merchandise Display Assembly Technician in Reston, Virginia Have you ever wondered about the products on display at your favorite store? Do they come already put together? How do they get those big patio sets and play yards inside the store? The answer is simple: we do. We assemble them, disassemble them, build them, place them on display - all on-site right there in the store in Reston, VA! Now you're wondering if this could be the right job choice for you? Do you prefer working alone? Do you hate sitting still all day? Are you looking for a fast-paced, hands-on job? If you answered “ yes ”, joining our team as a retail merchandise display assembler may be a good fit for you. We have several positions in North Virginia open, including Reston VA. Responsibilities Read and comprehend instructions and follow established procedures Collect all material and equipment needed to begin the process Take precision measurements to ensure perfect fit of components Select or modify components according to measurements and specifications Align material and put together parts to build more complex units Check output to ensure highest quality Maintain merchandise in good condition Keep records of production quantities and time Report on issues, malfunction, or defective parts Check company toolbox application for assembly quantities and timeframes Maximize customer interest and sales levels by displaying products appropriately Around the Clock Services is hiring Retail Merchandise Assembly Technicians immediately in Reston, VA, NOVA and the entire Virginia area. You will be servicing our many retail chains, building wheelbarrows, outdoor gas grills, patio furniture & much more. After training there is an opportunity to work as an In-Store Merchandise Assembler with some of our biggest customers like Lowe's, Home Depot, ACE Hardware, Cabela's and more. Skills Proven experience as assembler Technical knowledge and ability to read blueprints, drawings etc. Good understanding of quality control principles Good communication skills (verbal and written) Excellent hand-eye coordination and physical condition Advanced knowledge of hand and power tools. Heavy lifting is required (up to 80lbs repeatedly and daily). Can work steadily, with accuracy, precision, and speed Must be able to stand, squat, and bend over for long periods of time. Can follow directions in the assembly of required products Must be mechanically inclined and meet productivity standards Able to solve unforeseen challenges while assembling various consumer products Must be self-motivated, energetic, and work well alone. You must have good technical knowledge and possess great manual dexterity. Ability to read instructions represented in manuals, drawings, schematics etc. and follow them with precision is extremely important. FLEXIBLE SCHEDULES - WEEKLY PAY IMMEDIATE OPENINGS - UNLIMITED EARNING POTENTIAL Work Requirements Must be 18 years of age or older. Must have reliable transportation. Must have a working mobile phone. Must have access to the internet. Must be available to be in the store at 9a, M-F Must have valid identification Flexible availability (weekends as needed) This position requires you to be able to drive between store locations. You must be willing and able to travel to various customer sites. Once fully trained (approx. 1-2 weeks, paid training), you will be out on the road, traveling to and working at our customer sites. Travel time and scheduling needs may vary. Tool Requirements Impact drill (at least 2 batteries) Assorted bits and adapters for drill Basic hand tools - screwdriver, wrench, sockets, box cutter Smartphone or Smart Device with WIFI or Mobile internet This is an independent contractor position. This job is based completely on piecework. Compensation is paid by the finished piece - in which each assembler gets paid for each item they build. The pay rate for each finished item varies on the level of difficulty. The faster and more accurately you work, the more money you make. Get hired fast! We have immediate openings available for in-store merchandise assembly technicians in Reston, VA. We are currently looking for candidates that can start within the next week. Assemblers wanted in Reston, Virginia & surrounding. NOTE: Upon hire you will be a W-4/I-9, 1099 independent contractor. We will have our local regional manager discuss the process of the piece rate pay and answer any questions you may have. The Company will consider qualified applicants with arrest and conviction records.