Assembly line worker jobs in Montgomery, AL

TSC's is seeking a Temporary Assembler, I at our Huntsville, AL Discovery location to support our production division. Responsibilities: Performs basic and intricate electronic/electro-mechanical assembly functions on prototype and production type hardware according to company workmanship standards and military or client specifications. Assists in the development and wiring of engineering models and in the development of assembly methods and wire lists. Uses hand or power tools to trim, shim, cut, and make other adjustments to fit components together and align them properly. May assist in instructing and training lower level assemblers. Reads and interprets wiring lists and assembly drawings and Works to work orders using visual aids, ECN's, and schematics. May perform any rework from test failures in accordance with standard repair procedures and may set up and operate automatic prepping, loading, and insertion equipment. The employee may frequently be required to stand; walk; and use hands to finger, handle, or feel objects, tools, or controls. The employee is required to reach with hands and arms. Requirements: High school diploma and 0-1 years of production and/or assembly experience Ability to lift and/or move up to 50 pounds. TSC Benefits: TSC offers a stable work environment, a competitive salary, and a comprehensive benefit package; including ESOP participation, 401k Plan, Flexible Work Schedules, Tuition Reimbursement, Co-Sponsored Health Plan, Paid Leave and much more. Applying to TSC: Only those candidates invited for an interview will be contacted. Employment at TSC is contingent upon the successful completion of a comprehensive background check, security investigation, and a drug screening. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

At STERIS, we help our Customers create a healthier and safer world by providing innovative healthcare and life science product and service solutions around the globe. What you will do as an Assembler As an Assembler you will be responsible for performing assembly work utilizing lean principles (one-piece flow) to produce FDA regulated devices in a controlled collaborative work environment. Shift:7:00-4:30 Monday-Thursday and 7:00am-11:00 on Friday The Experience, Skills and Abilities Required: * High school graduate/GED * Aptitude and ability to read and interpret basic Engineer blueprints and utilize Assembly Instructions ("Standard Work") to assembly medical device products. Typically joining mechanical and hydraulic components to include some basic electrical wiring. * Ability to manage, evaluate, and assemble components or sub-assemblies accurately and efficiently using small hand tools (tape measure, wrenches, screwdrivers, drills, level, torque wrenches, etc.) to align or position components. * Ability to work safely in a demanding environment performing task while standing and/or walking for extended periods (70%-100% of the day) * Ability to safety lift and carry up to forty (40) pounds. * Ability to periodically bend, stoop, and squat to perform tasks. Other: * Previous assembly experience with small or complex assemblies preferred; 1 - 2 years. * Ability to perform in-process inspections and testing preferred; 1 - 2 years. * Inspects and performs finished product testing to ensure product meets establish Engineering and Quality requirements. * Expected to accurately and legibly record in-process and finished product test results on Device History Record (DHR). * Identify and report any defects or problems encountered during the assembly process. * Ability to troubleshoot simple equipment malfunctions. * Demonstrates the ability to clearly communicate, collaborate, and work effectively with others in a team environment. * Ability and willingness to cross-train throughout home department. * Supports and promotes a Safe working environment/habit through adherence to STERIS established Safety procedures and guidelines. * Basic knowledge, understanding, and application of basic LEAN manufacturing tools such as 5S, Kanban, Visual Management, and Problem Solving are preferred. * Expected to maintain and sustain a clean and organized work environment. * Ability to sustain minimum productivity standards once trained. * Demonstrates basic arithmetic and counting skills. * Ability to adapt to conditions as dictated by business requirements Conforms to policies, procedures, and Code of Conduct as provided in Employee Handbook. * The above statements reflect the general details of the position and shall not be considered as a detailed description of all duties inherent in the position. Performs other duties as needed. What STERIS Offers We Value our employees and are committed to providing a comprehensive benefits package that supports your heath, well-being, and financial future. Here is just a brief overview of what we offer: * Market Competitive Pay * Extensive Paid Time Off and (9) added holidays * Long/short Term disability coverage * 401(k) with company match * Maternity & Paternal Leave * Additional add-ons benefits/discounts for programs such as Pet Insurance * Tuition Reimbursement and continues educations programs * Excellent opportunities for advancement and stable long-term career Preferred Experience Required: High school graduate/GED * Aptitude and ability to read and interpret basic Engineer blueprints and utilize Assembly Instructions ("Standard Work") to assembly medical device products. Typically joining mechanical and hydraulic components to include some basic electrical wiring. * Ability to manage, evaluate, and assemble components or sub-assemblies accurately and efficiently using small hand tools (tape measure, wrenches, screwdrivers, drills, level, torque wrenches, etc.) to align or position components. * Ability to work safely in a demanding environment performing task while standing and/or walking for extended periods (70%-100% of the day) * Ability to safety lift and carry up to forty (40) pounds. * Ability to periodically bend, stoop, and squat to perform tasks. Other: * Previous assembly experience with small or complex assemblies preferred; 1 - 2 years. * Ability to perform in-process inspections and testing preferred; 1 - 2 years. * Inspects and performs finished product testing to ensure product meets establish Engineering and Quality requirements. * Expected to accurately and legibly record in-process and finished product test results on Device History Record (DHR). * Identify and report any defects or problems encountered during the assembly process. * Ability to troubleshoot simple equipment malfunctions. * Demonstrates the ability to clearly communicate, collaborate, and work effectively with others in a team environment. * Ability and willingness to cross-train throughout home department. * Supports and promotes a Safe working environment/habit through adherence to STERIS established Safety procedures and guidelines. * Basic knowledge, understanding, and application of basic LEAN manufacturing tools such as 5S, Kanban, Visual Management, and Problem Solving are preferred. * Expected to maintain and sustain a clean and organized work environment. * Ability to sustain minimum productivity standards once trained. * Demonstrates basic arithmetic and counting skills. * Ability to adapt to conditions as dictated by business requirements Conforms to policies, procedures, and Code of Conduct as provided in Employee Handbook. * The above statements reflect the general details of the position and shall not be considered as a detailed description of all duties inherent in the position. Performs other duties as needed. Pay range for this opportunity is $17.47 - $22.61. This position is eligible for bonus participation. Minimum pay rates offered will comply with county/city minimums, if higher than range listed. Pay rates are based on a number of factors, including but not limited to local labor market costs, years of relevant experience, education, professional certifications, foreign language fluency, etc. STERIS offers a comprehensive and competitive benefits portfolio. Click here for a complete list of benefits: STERIS Benefits Open until position is filled. STERIS is a leading global provider of products and services that support patient care with an emphasis on infection prevention. WE HELP OUR CUSTOMERS CREATE A HEALTHIER AND SAFER WORLD by providing innovative healthcare and life sciences products and services around the globe. For more information, visit *************** If you need assistance completing the application process, please call ****************. This contact information is for accommodation inquiries only and cannot be used to check application status. STERIS is an Equal Opportunity Employer. We are committed to equal employment opportunity to ensure that persons are recruited, hired, trained, transferred and promoted in all job groups regardless of race, color, religion, age, disability, national origin, citizenship status, military or veteran status, sex (including pregnancy, childbirth and related medical conditions), sexual orientation, gender identity, genetic information, and any other category protected by federal, state or local law. We are not only committed to this policy by our status as a federal government contractor, but also we are strongly bound by the principle of equal employment opportunity. The full affirmative action program, absent the data metrics required by § 60-741.44(k), shall be available to all employees and applicants for employment for inspection upon request. The program may be obtained at your location's HR Office during normal business hours.

Job DescriptionSalary: The Rough Fab Assembler (RFA) is responsible for assembling equipment in preparation for wiring, testing, and final assembly. The RFA will fulfill many roles within the process of assembling electronics equipment. The RFA will assemble off-the-shelf OEM equipment and will integrate custom panels and custom brackets to create unique assemblies per project needs. The RFA will receive shipments, distribute parts, organize parts by project, ship assemblies, maintain warehouse, maintain tools and equipment used in the process, and fulfill any other tasks as required by supervisors and management. Rough Fab Job Duties & Responsibilities Read and understand assembly drawings Ensure that all required parts for assembly are available Mark cutting lines and drilling holes on materials Confirm proper fitting and alignment of materials to be assembled Maintain production schedule Maintain clean and organized work area Clean and maintain tools Assemble parts in equipment racks Prepare packaged assemblies for shipment Receive packages Load and ship packages and assemblies Obey safety requirements Requirements Proven work experience as a Fabricator Good dexterity Attention to detail Good organizational skills Ability to lift 50 lbs. Clean work area and warehouse Drivers license with clean driving record Physical stamina Ability to read and comprehend assembly drawings Proficiency with operating the following hand tools: Drill Screw Gun Circular Saw Jigsaw Ability to operate a Fork Lift Good interpersonal skills EOE/M/F/Veteran/Disabled

The Production Assembler plays a crucial role in the manufacturing process, contributing to the manufacture of high-quality products. Responsible for executing assembly tasks according to the work instructions, this role requires precision, attention to detail, and adherence to quality standards. The Production Assembler must achieve set production goals, maintain a safe and clean work environment, and leverage Lean manufacturing tools to enhance efficiency. Monday-Thursday: 6:30am-5:15pm CORE FUNCTIONS Follow established work instructions to properly assemble products and/or different parts of products. Achieve established goals or deadlines set for specific work areas. Operate required equipment per safety guidelines, which may include wearing safety shoes, gloves, hearing protection, and eye protection. Complete all required paperwork and/or data entry. May work at different workstations as production needs require. Attendance and dependability are essential job functions. Required to report to work on time and follow attendance guidelines. Perform other duties as assigned. QUALIFICATIONS & REQUIREMENTS Education and Experience High school diploma or general education degree (GED) preferred. 1-3 months of related experience and/or training preferred. Required Licenses None Skills, Abilities, and Knowledge Ability to read and interpret documents such as safety rules, work instructions, operating and maintenance instructions, and procedure manuals. Ability to perform basic math. Ability to read and interpret measurements accurately. Travel None COMPETENCIES Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events. Responds promptly to customer needs; Responds to requests for service and assistance; Meets commitments. Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; commits to long hours of work when necessary to reach goals. Completes tasks on time or notifies appropriate person with an alternate plan. Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. Observes safety and security procedures; Reports potentially unsafe conditions; Uses equipment and materials properly. Balances team and individual responsibilities; Exhibits objectivity and openness to other views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Supports everyone's efforts to succeed. Speaks clearly and persuasively in positive or negative situations; listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings. SUPERVISOR RESPONSIBILITIES Individual Contributor: working team member with no oversight of others and no management responsibilities. PHYSICAL REQUIREMENTS This position is subject to Medium Work: Exerting up to 50 pounds of force occasionally and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Physical Activities This position is subject to the following physical activities: reaching, standing, walking, pushing, pulling, lifting, grasping, feeling, talking, hearing, and repetitive motions. Visual Acuity The worker is required to have visual acuity to perform an activity such as operating machines such as drill presses, press brake, power saws and mills where the seeing job is at or within arm's reach, performing mechanical or skilled trades' tasks of a non-repetitive nature. Working Conditions The worker is subject to an inside environment with conditions, including heat, noise, vibration, and hazards from a production-based environment.

Job Description The Production Assembler plays a crucial role in the manufacturing process, contributing to the manufacture of high-quality products. Responsible for executing assembly tasks according to the work instructions, this role requires precision, attention to detail, and adherence to quality standards. The Production Assembler must achieve set production goals, maintain a safe and clean work environment, and leverage Lean manufacturing tools to enhance efficiency. Monday-Thursday: 6:30am-5:15pm CORE FUNCTIONS Follow established work instructions to properly assemble products and/or different parts of products. Achieve established goals or deadlines set for specific work areas. Operate required equipment per safety guidelines, which may include wearing safety shoes, gloves, hearing protection, and eye protection. Complete all required paperwork and/or data entry. May work at different workstations as production needs require. Attendance and dependability are essential job functions. Required to report to work on time and follow attendance guidelines. Perform other duties as assigned. QUALIFICATIONS & REQUIREMENTS Education and Experience High school diploma or general education degree (GED) preferred. 1-3 months of related experience and/or training preferred. Required Licenses None Skills, Abilities, and Knowledge Ability to read and interpret documents such as safety rules, work instructions, operating and maintenance instructions, and procedure manuals. Ability to perform basic math. Ability to read and interpret measurements accurately. Travel None COMPETENCIES Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events. Responds promptly to customer needs; Responds to requests for service and assistance; Meets commitments. Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; commits to long hours of work when necessary to reach goals. Completes tasks on time or notifies appropriate person with an alternate plan. Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. Observes safety and security procedures; Reports potentially unsafe conditions; Uses equipment and materials properly. Balances team and individual responsibilities; Exhibits objectivity and openness to other views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Supports everyone's efforts to succeed. Speaks clearly and persuasively in positive or negative situations; listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings. SUPERVISOR RESPONSIBILITIES Individual Contributor: working team member with no oversight of others and no management responsibilities. PHYSICAL REQUIREMENTS This position is subject to Medium Work: Exerting up to 50 pounds of force occasionally and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Physical Activities This position is subject to the following physical activities: reaching, standing, walking, pushing, pulling, lifting, grasping, feeling, talking, hearing, and repetitive motions. Visual Acuity The worker is required to have visual acuity to perform an activity such as operating machines such as drill presses, press brake, power saws and mills where the seeing job is at or within arm's reach, performing mechanical or skilled trades' tasks of a non-repetitive nature. Working Conditions The worker is subject to an inside environment with conditions, including heat, noise, vibration, and hazards from a production-based environment.

Who We Are Lennox (NYSE: LII) Driven by 130 years of legacy, HVAC and refrigeration success, Lennox provides our residential and commercial customers with industry-leading climate-control solutions. At Lennox, we win as a team, aiming for excellence and delivering innovative, sustainable products and services. Our culture guides us and creates a workplace where all employees feel heard and welcomed. Lennox is a global community that values each team member's contributions and offers a supportive environment for career development. Come, stay, and grow with us. AES a division of Lennox, was established in 1988 and is one of the largest manufacturers of roof curbs and drop box diffuser systems in the nation. We have recently expanded our capabilities as a single source supplier by adding a Mechanical Services Division as well as becoming a Misc. Steel manufacturer. These new services will reduce construction costs and eliminate coordination with multiple suppliers and subcontractors. Our focus will be to enhance the services provided to our General Contractor network nationwide. AES has 4 different fabrication facility locations nationwide to assist our customers and reduce their freight cost and shipment lead times. What Drives Success An Assembler for Lennox AES at our Tallassee, AL location plays a crucial role in our production process by preparing components and assembling parts to create our finished products. They follow detailed instructions, blueprints, or diagrams to ensure the accurate and efficient creation of products. They will be responsible for painting, finishing, and/or insulating products. This will be a 3rd shift position with the following hours: Sunday-Thursday 10pm-6:30am Duties include, but are not limited to: Follow detailed instructions, blueprints, or diagrams to assemble components or products. Use hand tools, power tools, and other equipment to perform assembly tasks. Inspect and verify the quality of assembled products to ensure they meet specified standards. Identify and report any defects or issues with components or finished products. Adhere to safety guidelines and protocols to ensure a safe working environment. Communicate effectively with supervisors and team members regarding any issues or concerns. Collaborate with other departments to coordinate workflow and resolve issues. May perform other limited assembly, fabrication, production, or operator tasks of a standard nature. What We Are Looking For Ability to stand for extended periods. Manual dexterity and hand-eye coordination. Ability to lift and move moderate to heavy objects up to 50 pounds. Able to learn how to operate basic machinery (ex. Waterjet). Able to paint and work with insulation. Education/Experience: Requires a high school diploma or an equivalent combination of education and experience. Basic knowledge of hand and power tools. Ability to read and interpret blueprints, tape measures, diagrams, or assembly instructions. Attention to detail and commitment to producing high-quality work. Basic understanding of safety protocols in a manufacturing environment. What We Offer Compensation: This is an hourly non-exempt role. The starting pay for this role is $18.00/hour with a shift differential of $1.50. Factors that may affect the full pay range for employees in this role and market include geography/market and the individual's tenure, performance, skills, education, experience, and other qualifications of the successful candidate. Employees in this role are not eligible for a bonus but do earn overtime when they work more than 40 hours in a week (or as otherwise required by state law) Benefits: Subject to applicable eligibility requirements, the following benefits are offered for this role: Tuition reimbursement Medical, dental, and vision insurance; prescription drug coverage; 401(k) retirement plan Short-term disability insurance 8 weeks paid birthing leave; 2 weeks paid bonding leave Life and long-term disability insurance. Depending on date of hire, and subject to applicable eligibility requirements, new employees in this role also receive up to: 10 days paid time off and 10 paid holidays. Our Culture: At Lennox, our Core Values of Integrity, Respect & Excellence are ingrained in the fabric of the organization. They define our culture - which is about how we do business and how we treat others. Lennox is not just a workplace; we are a global community that values each team member's contributions. As an equal opportunity employer, we are committed to recruit, develop, and retain talented individuals from a wide range of backgrounds, ensuring that everyone has the opportunity to succeed and contribute to our continued growth and success. At Lennox, you'll take pride in our brands, knowing you are part of something special. Come, stay, and grow with us! Disclaimers: The compensation and benefits information is accurate as of the date of this posting. Lennox reserves the right to modify this information at any time, with or without notice, subject to applicable law. We can recommend jobs specifically for you! Click here to get started.

Oldcastle APG, a CRH Company, is North America's leading provider of innovative outdoor living solutions that enable customers to Live Well Outside. The manufacturer's portfolio of premier building products inspires endless possibilities while providing enduring outdoor spaces where people can connect, reflect and recharge. Award-winning brands include Belgard hardscape, Echelon Masonry, MoistureShield composite decking, RDI railing, Catalyst Fence Solutions, Sakrete packaged concrete, Amerimix mortar, Pebble Technology International pool finishes, Lawn & Garden mulches and landscape features, and Techniseal sands and sealant technologies. Job Summary Responsible for assisting designated machine operator or production team in a variety of functions including, but not limited to, maintenance, clean-up, yard work, warehouse, production, utilities, material handling and other. Job Responsibilities * Handle assignments in a repetitive and/or sequential order for completing tasks assigned * Keep work area clean * Use security gear at all times and follow all safety regulations * Report any unsafe conditions or defective equipment to the supervisor immediately * Clean-up machinery and conveyors, maintain the surrounding area, and keep equipment free from debris during down time * Clean floors and pick up reusable scrap for salvage * Transport trash and debris away from production areas * Responsible for keeping pallets neat and orderly * Operate machinery or equipment as trained and instructed following safety guidelines at all times * Assist lead operator in preparing for shift production * Work closely with the lead operator and become knowledgeable of the mechanics and operation of the machines in which you assist * May be required to work with conveyors, ramps, elevators, etc. as assigned * May be required to operate equipment such as hoppers, bagging and sealer machines, forklift, palletizers, hydraulic equipment, powered tractors or vehicles, among others * Internal certification/training is required for these tasks * Operate a variety of hand tool * Assist in the loading/unloading of trucks * Assist in completing shipping/receiving documents * Package and label products properly * Handle stockpiles * Verify loads leaving the premises * Maintain, verify, and count product inventory * Other duties and responsibilities related to the nature of the job may be assigned on a temporary or permanent basis as needed Job Requirements * High school diploma or equivalent or a comparable combination of education, training and experience * Ability to read and comprehend simple instructions * Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions * Ability to follow company production and safety procedures * Ability to read a limited number of two and three syllable words and recognize similarities and differences between words and between series of numbers * Able to pass internal certification training * Ability to print and speak simple sentences * Ability to add and subtract two-digit numbers and to multiply and divide 10's and 100's * Must be able to demonstrate lock out tag out procedures * Must keep key lock with self at all times * Must attend weekly safety meeting * While performing the duties of this job the employee will be required to frequently stand on their feet for extended periods of time * Must have the ability to lift and/or move up to 50 lbs. from ground level What CRH Offers You * Highly competitive base pay * Comprehensive medical, dental and disability benefits programs * Group retirement savings program * Health and wellness programs * An inclusive culture that values opportunity for growth, development, and internal promotion About CRH CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization. If you're up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest! Oldcastle APG, a CRH Company, is an Affirmative Action and Equal Opportunity Employer. EOE/Vet/Disability CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law. Date: Nov 6, 2025

Job DescriptionDescription: Merl, Inc seeks a skilled, self-motivated individual to join our team as an Assembly Technician at our Montgomery, Alabama location. This is an entry-level position with preference given to applicants who have experience working with sheet metal. The ideal candidate will be mechanically inclined and able to excell in a fast-paced environment with opportunity for advancement. There will be an evaluation and possibility for a merit increase upon successful completion of the training period. Requirements: · Fabricating Sheet metal to include precision bending and riveting · Soldering/brazing of sheet metal · Assembly involving reading and understanding instructions and blueprints using hand tools and measuring devices · Wiring, cutting and stripping in application of fasteners

The Assembler I will assemble and inspect product to ensure the highest quality product is provided to our customer. This role requires a person that is self-motivated, has a strong attention to detail and a continuous improvement mindset. BENEFITS & PAY Pay based on skill and experience Health Insurance plus Dental & Vision coverage 401K Responsibilities • Complete basic product assembly according to engineering standards, diagrams and drawings. • Perform a variety of tasks ranging from repetitive to non-repetitive product assembly operations. • Complete shop floor traveler documents. • Conduct quality inspections on processing line in accordance with quality specifications. • May disassemble, modify, rework, reassemble and test experimental assemblies. • Keep working area safe, clean and organized. • May work in other areas of the facility, as needed. • Ability to lift and move up to 50 pounds of materials and requires standing and moving. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee frequently is required to reach with hands and arms and talk or hear. The employee is occasionally required to walk. PREFERRED QUALIFICATIONS High school diploma or general equivalency diploma (GED). Prior related work experience (1+ years) Ability to read and interpret blueprints Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals REQUIRED QUALIFICATIONS Must be able to read, write, and communicate in English Ability to define problems, collect data, establish facts, and draw and apply valid conclusions Regularly use hands to finger, handle, or feel objects, tools, or controls and reach with hands and arms Regularly lift and/or move up to 15 pounds, frequently lift and/or move up to 30 pounds, and occasionally lift and/or move up to 50 pounds. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. COMPANY OVERVIEW Boyd is the world's leading innovator in sustainable engineered material and thermal solutions that make our customers' products better, safer, faster, and more reliable. We develop and combine technologies to solve ambitious performance targets in our customers' most critical applications. By implementing technologies and material science in novel ways to seal, protect, cool, and interface, Boyd has continually redefined the possible and championed customer success for over 90 years. As a unique provider of innovative solutions, Boyd is in a multitude of industries such as aerospace, medical, consumer electronics and recreational vehicles to name only a few. We partner and serve some of the top organizations around the world. Our diversification and our global reach in the US, Asia and Europe, mean we offer many ways for you to grow and develop your career. We push the limits of your potential and provide you with the tools you need for a successful career. All Job Posting Locations (Location) All Job Posting Locations (Location) Wetumpka Remote Type On-Site EEO Statement Boyd Corp is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at ******************** Notice: Know Your Rights: Workplace Discrimination is Illegal Notice: Pay Transparency Nondiscrimination (English) Aviso: Transparencia en el Pago No Discriminación (Spanish) Job Description: Airbus Mobile Manufacturing Site (MMS) is looking for an Aircraft Structures Assembler to join our production team in Mobile, AL. Meet the Team: The team at the Airbus U.S. Manufacturing facilities help assemble the finest aircraft in the world, along two (soon to be three) production lines for the A220 and A320 Family aircraft. On the shop floor you'll be surrounded by individuals who are passionate about aviation and skilled in areas like electrical, structure and quality. Join our team and help build the next generation of aircraft. Your Working Environment: Nearby on ‘Airbus Way' you will find the Airbus U.S. Manufacturing Facility for commercial aircraft. Opened at the Mobile Aeroplex at Brookley in 2015, the facility produces A320 Family aircraft and added a second product line for the A220 in 2019. The facility, which strengthens the U.S. aerospace industry, is part of Airbus' strategy to enhance its global competitiveness by meeting the growing needs of its customers in the United States and beyond. How We Care for You: Financial Rewards: Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan (“ESOP”) Work/Life Balance: Paid time off including personal time, holidays and a generous paid parental leave program. Health & Welfare: Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan (“EAP”) and other supplemental benefit coverages. Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility. Your Challenges: Position Summary: Responsible for the structural installation of parts and major components in the manufacturing of the aircraft within the assigned station area. Primary Responsibilities: ● Perform repair work (concessions/discrepancies). ● Positioning and assembly of components. ● Rework of external skin damage of the aircraft. ● Work in compliance with production orders, design documents, concessions and inspection procedures. ● Prepare and solve queries, ensure follow-up and give feedback. ● Examine and sort work orders and drawings. ● Prepare job station for daily activity. ● Perform other duties as assigned. Qualified Experience / Skills / Training: Education: Required: High school diploma or GED. The ability to successfully complete the following trainings provided by Airbus after recruitment: ■ Health & Safety ■ General aircraft familiarization ■ Quality trainings Preferred: Training from a vocational school or previous employer in the use of application tools and in application techniques. Experience: Required: 2 years minimum experience in Aviation Production or equivalent Previous hands-on experience with drilling tools, templates, drilling machines, fasteners, and torqueing tools Preferred: 5+ years minimum experience in Aviation Production Knowledge, Skills, Demonstrated Capabilities: ● Knowledge of station safety, quality (clean as you go/FOD) and OSHA regulations. Communication Skills: ● Effective verbal and written communication skills. Technical Systems Proficiency: ● Able to enter, generate and retrieve information using a computer (SAP and Excel knowledge required) Physical Requirements: Vision: adequate to enter and read material on computer screens. Able to identify individuals to initiate greetings, the giving of directions and other business interactions Hearing: able to hear sufficiently to engage in conversation in office settings. Able to hear safety alerts and warning signals. Speaking: able to engage in conversations in person and via electronic means and deliver information to groups of varying size with or without amplification. Equipment Operation: Able to operate a wide range of tools and equipment including hydraulic lifts and arms. Carrying: able to occasionally carry up to 20lbs/9kg while engaging in training, addressing production issues or as part of continuous improvement projects. Lifting: able to occasionally lift up to 30lbs/14kg. Pushing/Pulling: able to push/pull items in office areas. Sitting: able to sit for extended periods of time at the computer and in meetings. ∙ Squatting/Kneeling: Able to occasionally squat or kneel to retrieve or replace items shelved on bottom shelves. Confined Space: able to enter and exit a 12" x 22" passage and work through a 9.7" x 17.7" opening while using a respirator within a confined space for various lengths of time. Heights: able to work at heights of approximately 40 feet on various types of platforms and lifts for various lengths of time Standing: able to stand for extended periods of time delivering information. Travel: able to travel overseas and domestically sometimes for extended periods of time. Walking: able to walk through office and production areas, around flightline and airstrips and sometimes on uneven indoor and/or outdoor surfaces. Take your career to a new level and apply online now! This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Americas, Inc. Employment Type: US - Direct Hire Experience Level: Professional Remote Type: Job Family: Assembly & Integration ------ Job Posting End Date: 12.27.2025 ------ Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to ****************.

will serve our Water Heating Division, located in Montgomery, Alabama. High School Diploma or Equivalent (GED, Secondary School Diploma, etc.). 1+ years experience in manufacturing environment. The ability to work from written or verbal orders. The ability to read and write in English. Attention to Detail. Basic Math. Reading/Writing Comprehension. Work Environment: May be exposed to high noise levels. Physical Demands: Continuous lifting of 5-25 lbs; Frequent lifting of 25-60 lbs; Occasional lifting of 60+ lbs. Must be able to walk, stand, and/or lift repetitively during shift. Will be required to assemble metal units or parts contributing to the forming of a complete water heater or sub-assembly using hand tools, air powered tools and/or jigs. Will be required to use repetitive motions assembling parts, nuts, bolts, and screws. Must be able to use common sense in determining whether simple adjustments are to be made to ensure proper/correct positioning of parts or tools. Make common sense decisions to reject faulty parts if necessary. May be utilized in various positions as deemed necessary to supervisor. Must be able to do job properly and keep up with production. Must be able to sit, stand, stoop, and kneel for long periods of time. Assembler must regularly lift and move in repetitive motions to carry out job duties. Assembler will occasionally be exposed to fumes or airborne particles. Assembler will occasionally work near moving mechanical parts and is occasionally exposed to wet and/or humid conditions. Maintain good housekeeping in work area. Work from written or verbal orders. Report any tool/machine malfunctions to Leadman or Supervisor. Observe all departmental safety requirements. Inspect units or parts for defects and workmanship. Perform other related duties as required by supervisor.

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at ******************** Notice: Know Your Rights: Workplace Discrimination is Illegal Notice: Pay Transparency Nondiscrimination (English) Aviso: Transparencia en el Pago No Discriminación (Spanish) Job Description: Airbus US Manufacturing Facility is looking for at Aircraft Structures Assembler to join our Team based in Mobile, AL Meet the team: The team at the Airbus U.S. Manufacturing facilities assemble the finest aircraft in the world, along two (soon to be three) production lines for the A220 and A320 Family aircraft. On the shop floor you'll be surrounded by individuals who are passionate about aviation and skilled in areas like electrical, structure and quality. Join our team and help build the next generation of aircraft. Your working environment: Nearby on ‘Airbus Way' you will find the Airbus U.S. Manufacturing Facility for commercial aircraft. Opened at the Mobile Aeroplex at Brookley in 2015, the facility produces A320 Family aircraft and added a second product line for the A220 in 2019. The facility, which strengthens the U.S. aerospace industry, is part of Airbus' strategy to enhance its global competitiveness by meeting the growing needs of its customers in the United States and beyond. How we care for you: Financial Rewards: Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan (“ESOP”) Work/Life Balance: Paid time off including personal time, holidays and a generous paid parental leave program. Health & Welfare: Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan (“EAP”) and other supplemental benefit coverages. Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility. At Airbus, we support you to work, connect and collaborate more easily and accessibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking. Your challenges: Primary Responsibilities Perform repair work (concessions/discrepancies).• Positioning and assembly of components. Rework of external skin damage of the aircraft. Work in compliance with production orders, design documents, concessions and inspection procedures. Prepare and solve queries, ensure follow-up and give feedback. Examine and sort work orders and drawings. Prepare a job station for daily activity. Perform other duties as assigned. Your boarding pass: Required: 2 years minimum experience in Aviation Production or equivalent Previous hands-on experience with drilling tools, templates, drilling machines, fasteners, and torquing tools. Preferred: 5+ years minimum experience in Aviation Production. Physical Requirements: Vision: adequate to enter and read material on computer screens. Able to identify individuals to initiate greetings, the giving of directions and other business interactions Hearing: able to hear sufficiently to engage in conversation in office settings; Able to hear safety alerts and warning signals. Speaking: able to engage in conversations in person and via electronic means and deliver information to groups of varying size with or without amplification. Carrying: able to occasionally carry up to 20lbs/9kg while engaging in training, addressing production issues or as part of continuous improvement projects. Lifting: able to occasionally lift up to 30lbs/14kg. Pushing/Pulling: able to push/pull items in office areas and on the shop floor. Sitting: able to sit for extended periods of time at the computer and in meetings. Squatting/Kneeling: able to occasionally squat or kneel to retrieve or replace items shelved on bottom shelves. Standing: able to stand for extended periods of time delivering information. Travel/Mobility: able to travel overseas and domestically sometimes for extended periods of time and on short notice. Walking: able to walk through office and production areas, around flight line and airstrips and sometimes on uneven indoor or outdoor surfaces other business interactions Space Limitations: Working on jigs at the fuselage at a height of 15 feet. Take your career to a new level and apply online now! This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Americas, Inc. Employment Type: US - Direct Hire Experience Level: Entry Level Remote Type: On-site Job Family: Assembly & Integration ------ Job Posting End Date: 10.31.2025 ------ Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to ****************.

The production line worker is responsible for participating in the manufacturing process of the production line. Each production worker will be trained in different positions for flexing the workforce. We are looking for high energy dependable individuals that are motivated and willing to learn. ESSENTIAL DUTIES AND RESPONSIBILITIES Treat all coworkers with dignity and respect regardless of gender, race, national origin, age, religions, sexual orientation, or disability. Maintain a safe and clean department. Follow all established safety practices. Maintain high productivity numbers. Act professionally and remain focused while working Follow direction of leadership Perform cleaning activities as required Maintain a positive attitude Additional responsibilities as assigned by management Follow production instructions in accordance with Standard Operating Procedures to meet manufacturing standards. Operate machinery and monitor items on a high-speed continuous production line including sewing and quality assurance by visually inspecting product for deviations. Ensure high quality products are produced Overtime hours may be required based on work demand. Employees must be flexible with the work hours needed. QUALIFICATIONS & SKILLS Previous production line and/or sewing experienced desired. If there is no previous experience in sewing operations, training is available for those with a high motivation to learn. Must be able to work in a team setting. Ability to follow detailed instructions/detailed oriented Ability to follow and understand schedules and process Ability to multi-task Ability to stand for 8-10 hours a day Ability to work independently without close supervision Ability to work flexible hours and overtime when required Must have strong work ethic Must be okay with repetitive movement. The ability for bending, lifting, and twisting Ability for working in a fast-paced environment PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently is required to stoop, kneel, crouch, bend, twist or crawl. The employee must repetitively lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. OTHER DUTIES AS ASSIGNED This job description is an overview of the scope of responsibilities for this job and is not intended to be an inclusive list of job tasks and expectations. With the evolution of Exxel Outdoors, LLC, the responsibilities of this position may change. The job must be prepared to accept new responsibilities and transfer others. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

No Phone Calls Please! If you are selected for an interview we will contact you. . Please upload your resume'. The Bakery Production Worker rotates throughout several tasks in a production environment including filling, wrapping, and packaging product while adhering to food safety and quality procedures. **Job Responsibilities** + Operates and supervises continuous production line + Rotates among duties including the filler machine, wrapper machine, packing boxes, stacking boxes, etc. + Visually inspects product for quality and quantity + Reports all equipment issues to the supervisor or manager in a timely manner + Understands and follows all safety procedures that apply to daily operations + Maintains a safe and clean environment by following all safety policies and procedures + Maintains excellent customer service and positive demeanor towards guests, customers, clients, co-workers, etc. + Adheres to Aramark and OSHA safety policies and procedures including proper food safety and sanitation + Ensures security of company and client assets At Aramark, developing new skills and doing what it takes to get the job done make a positive impact for our employees and for our customers. In order to meet our commitments, job duties may change or new ones may be assigned without formal notice. **Qualifications** - Previous experience in a bakery production or related role preferred - Validated knowledge of bakery production methods and standards - Validated Knowledge of food safety regulations such as proper food handling, sanitation, and storage - Must be able to obtain a food safety certification - Demonstrates basic math and counting skills - Requires repetitive motion with hands and arms - Requires ability to stand and walk for the duration of shift. This role may have physical demands including, but not limited to, lifting, bending, pushing, pulling and/or extended walking and standing. This role may also require uniforms and/or usage of Personal Protective Equipment (PPE). **Education** **About Aramark** **Our Mission** Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law. **About Aramark** The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at ***************************** or connect with us on Facebook , Instagram and Twitter . **Nearest Major Market:** Montgomery

Our company, Closet Factory, is the custom storage solution authority serving the worldwide need for custom space organization throughout the home. We design, sell and install custom closets, home offices, garages, home theaters, pantries, bookshelves and more. Our products are of the highest quality. We have been in business for over 40 years and have locations across the country. We have experienced substantial, long-term growth and as a result are searching for another member to add to our close-knit team of people to manufacture our products. Our factory produces all of the wood parts to our complete product line using the 32-millimeter system. Members of our factory prepare each job and check it for accuracy and quality before it is sent to the client's home. Job Benefits: * Full-time, permanent positions * Year round work * Best Training in the Industry * Continual Support * We have never had a lay-off in our entire history! * Climate Controlled Factory Specific requirements: * Experience with basic hand tools * Some woodworking experience a plus We recognize people as our most valuable asset and will train you to excel in your position. A future with Closet Factory has never been brighter. If you are thinking about taking the next big step in your career, this may be the opportunity you have been waiting for.

GRIFFIN has a NEW CLIENT in HUNTSVILLE! COME WORK for US! Our client is seeking an experienced SI Assembler!! Minimum of 6 months experience in assembling military cable and wire harness assemblies is highly preferred. IPC/WHMA-A-620 Certification a plus. 1ST SHIFT Essential Functions and Competencies Demonstrate good component recognition skills Understanding of basic computer skills Effective interpersonal skills Demonstrate high attention to detail Demonstrate discretion, confidentiality and professionalism when representing our client. Ability to work overtime as needed Ability to work with diverse groups Participate in a continuous improvement activity Ability to read, write and perform basic math Qualifications / Education / Experience Reading drawing, using tools, commutation with co-workers and supervisor, dealing with multiple jobs at any given time. Ability to follow a process. Review Drawings, Bills of Material, Part Description of Mechanical Parts, Fasteners, Wires, Connectors, Washers, Spacers, and similar types of parts Assemble kits using kitting instructions with accurately reading parts, quantities, revisions Assemble Wire Harness, Cable Assemblies using shop tools such was wrenches, torque drivers, hand tools, thread gages, Go - No-Go Gages Accurately assemble Electrical and or Mechanical Parts using either an example or from Assembly drawings or Instructions Fill forms, record data, verify count accuracy, check assembly description, dimensions, size, color Accesses the appropriate paperwork and necessary drawings for each job assignment Verifies kits, enters Batch lot information, package and label accessory items according to documented instructions Uses appropriate mats and all required tooling Checks equipment (torque wrenches, screwdrivers, etc.) to ensure proper performance Uses manufacturing routings and process instructions under close supervision May assemble a variety of systems integration subassemblies Notifies leadership of any shut down situations Enters data into Process Feedback System (PFS) and link subassemblies to final unit Enters quantities into Operations Complete (Baan) when required All employees are responsible for the Quality of their work to ensure BEI meets, or exceeds Customer Satisfaction. A background and previous work experience in Aerospace, Aviation, Defense, Military, Army with a similar experience is considered a plus Minimum of 6 months experience in assembling military cable and wire harness assemblies is highly preferred.h a similar experience is considered a plus • High School Diploma or equivalent • Ability to perform unpacking and teardown activities (systems integration • Minimum of 6 months experience in assembling military cable and wire harness assemblies is highly preferred. • IPC/WHMA-A-620 Certification a plus. SEND YOUR RESUME TODAY!

This person will be responsible for electrical assembly in a production environment. We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: **************************************************** Skills and Requirements High school diploma 3+ years as an Electrical assembler - IPC/WHMA-A-620 - ISO 9001 - NASA-STD-8739.4 (good, though not essential)

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at ******************** * Notice: Know Your Rights: Workplace Discrimination is Illegal * Notice: Pay Transparency Nondiscrimination (English) * Aviso: Transparencia en el Pago No Discriminación (Spanish) Job Description: Airbus Mobile Manufacturing Site (MMS) is looking for an Aircraft Structures Assembler to join our production team in Mobile, AL. Meet the Team: The team at the Airbus U.S. Manufacturing facilities help assemble the finest aircraft in the world, along two (soon to be three) production lines for the A220 and A320 Family aircraft. On the shop floor you'll be surrounded by individuals who are passionate about aviation and skilled in areas like electrical, structure and quality. Join our team and help build the next generation of aircraft. Your Working Environment: Nearby on 'Airbus Way' you will find the Airbus U.S. Manufacturing Facility for commercial aircraft. Opened at the Mobile Aeroplex at Brookley in 2015, the facility produces A320 Family aircraft and added a second product line for the A220 in 2019. The facility, which strengthens the U.S. aerospace industry, is part of Airbus' strategy to enhance its global competitiveness by meeting the growing needs of its customers in the United States and beyond. How We Care for You: * Financial Rewards: Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan ("ESOP") * Work/Life Balance: Paid time off including personal time, holidays and a generous paid parental leave program. * Health & Welfare: Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages. * Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility. Your Challenges: Position Summary: Responsible for the structural installation of parts and major components in the manufacturing of the aircraft within the assigned station area. Primary Responsibilities: ● Perform repair work (concessions/discrepancies). ● Positioning and assembly of components. ● Rework of external skin damage of the aircraft. ● Work in compliance with production orders, design documents, concessions and inspection procedures. ● Prepare and solve queries, ensure follow-up and give feedback. ● Examine and sort work orders and drawings. ● Prepare job station for daily activity. ● Perform other duties as assigned. Qualified Experience / Skills / Training: Education: Required: High school diploma or GED. The ability to successfully complete the following trainings provided by Airbus after recruitment: ■ Health & Safety ■ General aircraft familiarization ■ Quality trainings Preferred: Training from a vocational school or previous employer in the use of application tools and in application techniques. Experience: Required: 2 years minimum experience in Aviation Production or equivalent Previous hands-on experience with drilling tools, templates, drilling machines, fasteners, and torqueing tools Preferred: 5+ years minimum experience in Aviation Production Knowledge, Skills, Demonstrated Capabilities: ● Knowledge of station safety, quality (clean as you go/FOD) and OSHA regulations. Communication Skills: ● Effective verbal and written communication skills. Technical Systems Proficiency: ● Able to enter, generate and retrieve information using a computer (SAP and Excel knowledge required) Physical Requirements: * Vision: adequate to enter and read material on computer screens. Able to identify individuals to initiate greetings, the giving of directions and other business interactions * Hearing: able to hear sufficiently to engage in conversation in office settings. Able to hear safety alerts and warning signals. * Speaking: able to engage in conversations in person and via electronic means and deliver information to groups of varying size with or without amplification. * Equipment Operation: Able to operate a wide range of tools and equipment including hydraulic lifts and arms. * Carrying: able to occasionally carry up to 20lbs/9kg while engaging in training, addressing production issues or as part of continuous improvement projects. * Lifting: able to occasionally lift up to 30lbs/14kg. * Pushing/Pulling: able to push/pull items in office areas. * Sitting: able to sit for extended periods of time at the computer and in meetings. ∙ * Squatting/Kneeling: Able to occasionally squat or kneel to retrieve or replace items shelved on bottom shelves. * Confined Space: able to enter and exit a 12" x 22" passage and work through a 9.7" x 17.7" opening while using a respirator within a confined space for various lengths of time. * Heights: able to work at heights of approximately 40 feet on various types of platforms and lifts for various lengths of time * Standing: able to stand for extended periods of time delivering information. * Travel: able to travel overseas and domestically sometimes for extended periods of time. * Walking: able to walk through office and production areas, around flightline and airstrips and sometimes on uneven indoor and/or outdoor surfaces. Take your career to a new level and apply online now! This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Americas, Inc. Employment Type: US - Direct Hire Experience Level: Professional Remote Type: Job Family: Assembly & Integration * ----- Job Posting End Date: 12.27.2025 * ----- Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to ****************.

START First DAY with PAID HOLIDAYS AND PAID Monthly PTOs (NO waiting) Has HVAC Building LIGHT Assembly JOBS **WILL TRAIN CALL M-F ********** 8am to 4pm for MORE Details SHIFTS: 2nd OR 3rd *Will TRAIN *NO Steel Toes = Full Shoe like Tennis Shoe/Sneaker, T-Shirt, Jeans Read and Write Skills Good Quality Work Background Check Paid Weekly *$14.25 = $570 Weekly*NO Rotating *VERY LITTLE OT Benefits: Holiday Pay, Vacation Pay, Medical, Dental, Retirement and more **Send Resume to Apply, THEN Call M-F 8AM to 4PM ************