Assembly line worker jobs in Norwalk, CT

Mini-Circuits designs, manufactures and distributes integrated circuits, modules, and sub-systems for high-performance radio frequency (RF) and microwave applications. With design, sales and manufacturing locations in over 30 countries, Mini-Circuits' products are used in a range of wired and wireless communications applications. Our products are also used in detection, measurement and imaging applications, including military communication, guidance and electronic countermeasure systems, commercial, scientific, military land, sea and aircraft, automotive systems, medical systems, and industrial test equipment. Mini-Circuits' sells its products to over 20,000 customers globally through our direct sales force, applications engineering staff, sales representatives, as well as through our extensive website. Position Summary: The Solder-Assembler is responsible for building PCB Test Boards and SMT based hardware. Salary Range: $27.50 - $35.00 per hour Job Function: Performs soldering tasks with small components and micro soldering tips down to 1005 component size (5x10mil) Performs mechanical assembly tasks with small metalwork. Performs delicate rework tasks while minimizing collateral damage. Self-inspects his/her own work. Assists with troubleshooting units by inspection. Reads and works from assembly drawings and provide markups with improvements/design changes when necessary. May contribute to chip and wire assembly Keeps work area neat and clean and assists other staff with keeping lab clean. The duties, responsibilities and expectations described above are not a comprehensive list and additional tasks may be assigned to the member, within the scope of the position. Qualifications: High school diploma, GED, or international equivalent required. Minimum 10 years of assembly experience in SMT, small mechanical assembly. Ability to utilize electronic work instructions and assembly drawings. Ability to sit at a bench for an extended period of time. Ability to work under a microscope. Must be able to read, write and orally communicate in English. Proficient in computers, must be able to use MS Office (Word, Excel, PowerPoint) and ERP interface. Ability to perform die attach using electrically conductive epoxies; dispenses epoxy using both manual techniques and a dispensing machine. Ability to perform wire bonding tasks using a variety of wire and ribbon sizes, and both ball and wedge. Must be willing to work in a multi-disciplined team (Engineer, Technician, Assembler, Designer, MPE). Must be comfortable working in a hybrid development and production environment where priorities may change rapidly. Must be willing to continuously try and improve assembly skills and work closely with another assembler. Must be comfortable working in a Class 100,000 clean room. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, sit and use hands to operate a computer keyboard. The employee is occasionally required to reach with hands and arms. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Cultural Focus: Displays enthusiasm and Passion for their work. Works to the standard of Uncompromising Quality by meeting or exceeding stated objectives and embracing continuous improvement. Exercises sound Business Judgement, ensuring that efforts are on track with the Company's goals. Operates with the mindset of Customer Obsession - by meeting or exceeding expectations to both internal and external customers. Takes Accountability by taking ownership and accepting responsibility for their conduct and contributions. Demonstrates a strong sense of urgency and accomplishes tasks with Speed and attention to detail. Cooperates, collaborates and contributes to shared goals with a strong sense of Teamwork. Conducts themselves with Honesty & Integrity and treats all members with Trust & Respect. Additional Requirements/Skills: Comply, understand, and support corporate safety initiatives to ensure a safe work environment. Ability and willingness to abide by Company's Code of Conduct. Benefits: We offer a comprehensive package of benefits including paid time off, medical/dental/vision insurance, and 401(K) to eligible employees. Comprehensive Medical, Dental, and Vision plans 401(K) and Profit-Sharing Programs Disability Insurance Life Insurance Employer-Sponsored Wellness Plans Commuter Benefits Hospital & Accident Indemnity Insurance Employee Benefit Advocate & Employee Assistance Program Disclaimer: The listed qualifications and requirements for each position are intended as guidelines. Mini-Circuits reserves the right to hire outside of these guidelines at Management's discretion. Mini-Circuits is an Equal Opportunity Employer and does not discriminate on the basis of actual or perceived age, race, creed, color, national origin, sexual orientation, military status, sex, disability, predisposing genetic characteristics, marital status, familial status, gender identity, gender dysphoria, pregnancy-related condition, and domestic violence victim status or protected class characteristic, or any other protected characteristic as established by federal or state law.

Hi- Rel Solder Hi-Rel Solder Assembler to join our manufacturing team. The successful candidate must have 2-3 year's experience. Perform precision hand soldering of surface-mount and through-hole components to IPC Class 3 standards. Responsible for assembling and soldering high-reliability printed circuit boards (PCBs) and sub assemblies in accordance with industry standards such as IPC J-STD-001, IPC-A-610. The candidate should have working knowledge of Operating soldering equipment, microscopes, and other assembly tools. Must be able to read and interpret assembly documents and engineering drawings. Education and Required Skills - High School diploma or equivalent and 2+ years in PCB or electronics assembly, preferably in a Hi-Rel or relative environment. - Proficiency in soldering to IPC J-STD- A-610 Class 3 standards. - Certification in IPC J-ATD-001 and/or IPC-A-610. - Experience in working under a microscope and magnification and with fine-pitch components. - Familiarity with ESD protection procedures. - Ability to read and understand technical documents and drawings. - Excellent attention to detail and manual dexterity. Strong computer and written skills is a PLUS, willing to train an enthusiastic applicant willing to learn a new skill. We offer a comprehensive benefit package including: Health Insurance, Dental Insurance, Vision, Life Insurance, Short Term Disability, Long Term Disability, Flexible Spending Option and 401K. We also offer Paid Time Off including: Vacation, Sick and Paid Holidays.

VJ X-Ray LLC is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. This key position is responsible for assembling electronic components to specifications while meeting production schedules, performance and quality standards. This position requires reliability, task flexibility and the ability to follow instructions. : Utilize bill of material, written or verbal instructions to assemble or re-work x-ray source components and high voltage generators Work from schematics or assembly drawings to modify subassemblies, as required Performs miscellaneous duties that include assisting other areas of production and quality assurance Prepare completed products for shipment Safety Sensitive Position Essential Skills: High School Diploma General understanding of electronic assembly procedures Understanding of ESD practices Ability to read and work from electrical prints Proficiency in circuit boards and soldering Familiarity with assembly tools and equipment Minimum two (2) years manufacturing or assembly experience Ability to work as part of a team Must be authorized to work in the U.S. Will need to successfully pass a personal background check and drug screenings Non-Essential Skills: Minimum two (2) years of full-time experience with proven reliability, preferably in a technical, manufacturing or research and development environment Experience in safe work environments and maintaining compliance with state and federal regulations Prior experience soldering through-hole and SMT components Ability to use a multi-meter to test and troubleshoot AC/DC circuits Physical & Mental Demands: Regularly required to sit, walk, bend, stoop and stand within an industrial environment Will need to repeatedly use hands & fingers to operate basic office equipment and operate hand and power tools standard to a production environment Responsibilities could require lifting, moving, staging, and placing of materials up to 50 pounds alone and heavier with assistance Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus Must be able to fulfill essential job functions in a consistent state of alertness and safe manner. On a regular basis, will be required to: use written and oral communication skills read and interpret data, information and documents be creative, make judgements, use reasoning and make decisions observe and interpret situations learn and apply new information or skills perform detailed work on multiple, concurrent tasks work under intensive deadlines with frequent interruptions interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels May need to communicate and effectively manage dissatisfied or frustrated customers and/or interface with difficult/demanding individuals This job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. The company takes affirmative action to ensure that applicants and employees are treated during the application process and post hiring employment without regard to any of these characteristics. Discrimination of any type is not tolerated.

Hamilton Connections is seeking candidates for an assembler position on the third shift at a manufacturing company in Danbury, CT. This is a temp-to-hire position. The hours are 10:30 p.m.-7 a.m., Sunday-Thursday. Training may be required on the first or second shift. The salary is $22.66 an hour. Job Responsibilities: Accurately picking necessary parts for production orders Assemble, check and package sub-components and finished products according to instruction, production order, work and inspection instructions as well as drawings in a quality and schedule-minded fashion Perform computer and administrative work such as order printing and label creation Coordinate transport arrangements with shipping Mount items necessary for fulfilling assembly orders of sub-components and finished products Maintain order at the workplace, in the storage locations, and in rooms of general use Temporary assignments as floater in different assembly teams Cooperation within assembly team Coordinate work assignments Handle the more complex assemblies Backup line leader when needed Provide training for other assemblers Other duties as assigned Job Requirements: High school diploma or GED 2 or more years of assembly experience Experience working overnight shift Mechanical ability necessary Able to work well in small team Able to handle physical aspects of the job, including heavy lifting Able to operate computers and electronic test equipment Able to handle time constraints and deadlines, and prioritize work Able to read and write English Able to pass pre-employment screenings

Sustainability, plastic pollution, and climate change have never been more at the forefront of our world as they are today. At Ranpak, sustainability has been in our DNA since our founding in 1972. Ranpak's goal then was to create the first environmentally responsible system to protect products during shipment and today, our mission remains the same: To deliver sustainable packaging solutions that help improve supply chain performance and costs, reduce environmental impact, and support a variety of growing business needs globally. The development and improvement of materials, technologies (such as automation) and total solution systems have earned Ranpak a reputation as an innovative leader in eCommerce and industrial supply chain solutions. Ranpak's customers span across a variety of industries including automotive parts, electronics, eCommerce, machinery and home goods. Our customers include Amazon, IKEA, Sephora, Misfit Market and BMW. Ranpak's corporate headquarters are in Concord Township, Ohio with European headquarters in Eygelshoven, the Netherlands and Asia Pacific headquarters in Singapore City, Singapore, respectively. Additionally, a new state-of-the-art building opened in Shelton, CT. Ranpak Holdings Corp. is a New York Stock Exchange listed company (NYSE: PACK). Summary Assembling and testing automated packaging solutions. Assembling mechanical, electrical and pneumatic component according to drawing, electrical schematics and instructions. Following and keeping track of project schedules. Collaboration with engineering, inventory, service and shipping departments. This job description is intended to convey information essential to understanding the scope of the Assembler position and it is not intended to be an exhaustive list of skills, efforts, duties, responsibilities or working conditions associated with the position. Essential Duties & Responsibilities * Reading and following assembly drawing and assembly instructions. Assemble, squares and aligns sub-assembly and structural components, on floor or floor plate. Installing the sub-assembly components on main frame according to drawing and instruction manuals. Mount, connect and adjust pneumatic component. Install and align conveyance systems. * Reading and wiring according to the electrical schematics. Lays our diagram for electrical installations according to wiring specifications. Mount and wire electrical components including motors, sensors, actuators, robotic arms, etc. * Follow and install all the safety requirements of the system. * Modifying component according to engineering request. Drill and tap holes, cutting slots, cutting parts, opening holes, grinding surfaces, rewire and change electrical components. * Report issues to the supervisor, engineering and quality team. * Test and adjusts mechanical and electrical assemblies following the assembly instructions and check lists. * Run the equipment and help with the FAT (Final Acceptance Test). * Collaborate with the service department. Help install the equipment on the customer site. * Following the project schedule and keeping truck of the production order schedule. Reporting the issues to the schedule to the supervisor. * Accurate control of inventory using production orders. Collaborate with inventory for maintaining all needed parts for the project. * Navigate to our Inventory, Project and File Management systems. * Forklift Operation trained or willing to have Forklift Operation Training. Other Duties As assigned by your manager Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and /or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Supervisory Responsibilities None Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform he essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to lift 50 - 80 pounds. Training High School of GED. Any technical school training in Industrial Electronics, Schematics or Blueprints helpful but not required. Decision Making Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Work Environment The work environment characteristics described here are representative of those an employee encounters while preforming the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EOE STATEMENT We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

Job DescriptionPosition Description: Help the manufacturing team assemble Genadyne UNO pumps as per customer orders Primary Objective: To assemble pumps and provide cross-functional support to warehouse, CSR and quality department to fulfill orders. Major Areas of Responsibility: Assemble pumps Conduct quality inspection on assembled pumps Verify receiving items for pump assemblies Create records of pumps that are built Maintain appropriate pump parts and accessory storage and handling activities Coordinate with NPWT manager on incoming orders Rework, Repair/Service pumps as required Specific responsibilities (tasks): 1) create and manage pumps, PCBs, part numbers 2) Perform quality test on pumps 3) create and manage documentation of pumps assembled, reworked, repaired and serviced 4) Able to provide technical support to the customers/manager or R&D team as required Requirements Education: High School Graduate Abilities: Ability to work independently, exhibit strong initiative Quick Learner Able to read and write in English Strong interpersonal skills - able to interact with all levels of management as well as customers if required Team player, assembly experience preferred Rate: $18.00/hr. Powered by JazzHR NqTEIZH512

Job DescriptionPower-Flo Technologies is seeking an assembler to join our New Hyde Park shop. We design and build custom switchboards and panelboards for a variety of customers. Full Time, Monday - Friday, 7 AM - 3:30 PM. Pay Range: $18 - $22/hour Competitive Benefits Package Health coverage (medical, dental, vision) PTO and Paid Holidays 401K EAP Assembler Required Skills Previous experience or training in a shop/industrial setting Mechanically inclined Familiar with taking measurements and working with a ruler Familiar with assembling components Able to follow instructions in a proper manner Familiar with shop tools (hand tools, power tools, etc) Valid and clean driver's license to operate company vehicles as needed Assembler Daily Tasks Reading and understanding blueprints prior to starting a project Sourcing the materials to be used in the project Measuring and cutting materials to specifications Assembly of switchboard enclosures and interior electrical components Preparing metal surfaces for finishing Working with design team to complete switchgear packages Checking finished work to make sure that it falls within the tolerances marked on the blueprints Preparing completed packages for shipment Assembler Physical Requirements Ability to safely use and lift equipment weighing 50 lbs. Ability to work standing up to 8 hours per day. This position occasionally requires sitting, climbing, balancing, stooping, kneeling, crouching, and crawling. Exposure to dust, loud noise, and temperature changes. Candidates must have a valid and clean NY State driver's license to operate company vehicles as needed. About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Mission Critical … Join PDC and make a Difference For more than 50 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. To continue to meet our customer's mission critical needs, PDC is seeking Micro Assemblers to join our respected and valued team. This position requires a U.S Person or a person who can qualify for a department of state of commercial license. This position is 100% onsite in our Bohemia, NY corporate headquarters. Day shift: 7am - 3pm; 7:30am - 3:30pm or 8am - 4pm (45 minute flexible schedule) This position requires a U.S Person or a person who can qualify for a department of state or commercial license. The compensation for this role is $20/hr to $26.50/hr. * We are not accepting applications from independent recruiters or agencies at this time for this role; should this change the posting will be updated to reflect submission information. Responsibilities: Perform a variety of complex assembly operations under a microscope, with little or no supervision. Perform die bonding, wire bonding, header assembly or other operations of comparable difficulty. Use small hand tools and microscope. Read and interpret complex assembly drawings and other documents to determine sequence of operation and proper assembly procedures. Assist in meeting department production goals. Detailed knowledge of automatic or manual wire bonding and die bonding machines if applicable. Read and follow operational sheets. Secondary Duties: Work in a team environment Cross train Determine priorities with given resources Job Qualifications - Education/Experience: Approximately 3 years micro assembly or related experience. Good eyesight and manual dexterity. Ability to read and interpret complex assembly drawings. Power Device Corporation provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description Schivo Medical manufactures a diverse range of essential medical technology solutions. Working with us, you will be manufacturing or supporting the manufacture of a vast array of different products including robotic surgery instruments, neurosurgical tools, and cardiovascular closure devices that treat chronic disease in new ways so people can live better and longer. As an employee of Schivo Medical, you will tackle a wide array of problems, including some of the world's greatest medical challenges. You will be part of a company committed to helping you build a fulfilling and rewarding career. Deburring-finishing Operator Position Overview: Work in a team of 5-8 members, primarily responsible for deburring, buffing, and polishing of medical device instruments. Essential Duties and Responsibilities: Follow work instructions. Use a microscope to inspect your work. Use buffing motors to smooth, polish and deburr. Use Ultrasonic cleaning machine medical device components. Maintain necessary logs. Provide necessary information to other team members and departments. Trouble shoot minor errors. Report on job status/progress to members of management team. Maintain quality, safety control standards. Necessary Education, Skills, and Competencies (including licensing and certifications): Good eye coordination Ability to speak, read (English) Excellent communications skills Good vision Ability to handle delicate parts Flexible schedule, dependable and possessing willingness to learn new techniques Ability to sit or stand for prolonged periods of time Ability to concentrate on a single task for prolonged periods of time Benefits: 401(k) 401(k)match Dental insurance Health insurance Vision Insurance Generous Paid time off Employee referral program Free coffee and tea daily Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

An ever growing medical company is looking for Production Workers . This is a great opportunity to for consistent and long term work. The ideal person must have previous experience working in a production environment. Must be comfortable standing for long periods of time Attention to detail Quality Inspection experience is a huge plus Documenting all aspects of the process Remove defective product and report it to the supervisor 1st shift, Pay: $13 per hour Submit your resume for consideration. Additional Information All your information will be kept confidential according to EEO guidelines.

Assembler VJ X-Ray LLC is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. This key position is responsible for assembling electronic components to specifications while meeting production schedules, performance and quality standards. This position requires reliability, task flexibility and the ability to follow instructions. : Utilize bill of material, written or verbal instructions to assemble or re-work x-ray source components and high voltage generators Work from schematics or assembly drawings to modify subassemblies, as required Performs miscellaneous duties that include assisting other areas of production and quality assurance Prepare completed products for shipment Safety Sensitive Position Essential Skills: High School Diploma General understanding of electronic assembly procedures Understanding of ESD practices Ability to read and work from electrical prints Proficiency in circuit boards and soldering Familiarity with assembly tools and equipment Minimum two (2) years manufacturing or assembly experience Ability to work as part of a team Must be authorized to work in the U.S. Will need to successfully pass a personal background check and drug screenings Non-Essential Skills: Minimum two (2) years of full-time experience with proven reliability, preferably in a technical, manufacturing or research and development environment Experience in safe work environments and maintaining compliance with state and federal regulations Prior experience soldering through-hole and SMT components Ability to use a multi-meter to test and troubleshoot AC/DC circuits Physical & Mental Demands: Regularly required to sit, walk, bend, stoop and stand within an industrial environment Will need to repeatedly use hands & fingers to operate basic office equipment and operate hand and power tools standard to a production environment Responsibilities could require lifting, moving, staging, and placing of materials up to 50 pounds alone and heavier with assistance Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus Must be able to fulfill essential job functions in a consistent state of alertness and safe manner. On a regular basis, will be required to: use written and oral communication skills read and interpret data, information and documents be creative, make judgements, use reasoning and make decisions observe and interpret situations learn and apply new information or skills perform detailed work on multiple, concurrent tasks work under intensive deadlines with frequent interruptions interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels May need to communicate and effectively manage dissatisfied or frustrated customers and/or interface with difficult/demanding individuals This job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. The company takes affirmative action to ensure that applicants and employees are treated during the application process and post hiring employment without regard to any of these characteristics. Discrimination of any type is not tolerated.

Job DescriptionBenefits/Perks Competitive Compensation Great Work Environment Career Advancement Opportunities We are seeking an Automotive Body Combo / Assembler / Disassembler to join our team! As an Automotive Body Repairer, you will work closely with clients to build strong relationships, thoroughly inspect and evaluate vehicles, and provide accurate, honest estimates for repair. You will also assist with repairing vehicles, managing multiple repair projects at once, and working closely with coworkers to ensure work is completed properly and on time. The ideal candidate has previous autobody experience, excellent customer service and communication skills, and strong attention to detail. Responsibilities Inspect and provide accurate estimates for autobody repair Maintain strong lines of communication between yourself and the client throughout the whole process to build relationships and provide excellent customer service Repair vehicles to the best of your ability, maintaining our high standards Work within the guidelines of various insurance guidelines Qualifications Previous autobody experience desired Own tools Attention to details Must work on the books Reliable

Cox & Company solves the aerospace industry's most challenging ice protection and temperature control problems. For over 80 years Cox has worked with OEMs, Tier 1 and Tier 2 Suppliers, as well as all major modification and finishing centers throughout the world. From initial design concepts through aircraft integration and operation, our company provides the highest quality full-lifecycle support to our customers. Cox & Company, Inc. is looking for an outgoing individual who will specialize in the manufacturing precision of using composite material in the Autoclave Area. Requirements * Perform vacuum bagging and related processes for fabrication and curing composite parts. * Clean and smooth molds, cores, and core boxes, and repair surface imperfections. * Assemble cores into lower sections of molds, to create mold assembly per work instructions. * Clean and maintain work area to ensure safe and efficient work environment. * De-molding cured parts * Ensure compliance with company policies and safety regulations * Document materials utilized in creating parts for traceability purposes. * Work to meet production goals and deadlines * Using scanner for time/attendance/work traveler. Qualification and Education Requirements: * General knowledge of practices and procedures used to fabricate composite parts or similar is preferred. * Ability to read and correctly interpret instructions in English is a must. * Ability to use measuring instruments. * Ability to lift rolls of material. * Ability to use a computer * High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Benefits & Wages: * 401K * Flex Scheduling * Health, Dental and Vision * Health Saving Account * Life Insurance * Disability Benefits * Paid Vacation & Holidays Physical Requirements: * The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * While performing the duties of this Job, the employee is regularly required to stand; use hands to finger, handle, or feel and reach with hands and arms. The employee must frequently lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. This position involves exposure to projects and contracts subject to the International Traffic in Arms Regulations (ITAR). As a result, only U.S. Citizens or Permanent Residents (Green Card holders) are eligible for employment in this role. Applicants must meet these requirements to be considered. Salary Description $19-$21 Hourly

• Handling and processing of quartz crystal resonators through various production sequences in a cleanroom environment. • Use tweezers to carefully handle and assembly small parts under a microscope. • Load completed parts onto trays with precision, ensuring no parts are dropped or damaged. • Follow standard operating procedure (SOP) documents to maintain consistently and quality in all tasks. • Collaborate effectively with team members to meet production goals. Education and Required Skills: • High School Diploma • Technical School graduate a plus. • Possess basic reading, writing and math skills (addition and subtraction). • Have strong verbal communication skills to interact with team members and supervisors. • Demonstrate a steady hand and excellent hand-eye coordination for working with small components. • Maintain a high level of attention to detail to ensure accuracy and quality. • Show a willingness to learn and adapt in a team environment. *This is a fully on-site role

Sustainability, plastic pollution, and climate change have never been more at the forefront of our world as they are today. At Ranpak, sustainability has been in our DNA since our founding in 1972. Ranpak's goal then was to create the first environmentally responsible system to protect products during shipment and today, our mission remains the same: To deliver sustainable packaging solutions that help improve supply chain performance and costs, reduce environmental impact, and support a variety of growing business needs globally. The development and improvement of materials, technologies (such as automation) and total solution systems have earned Ranpak a reputation as an innovative leader in eCommerce and industrial supply chain solutions. Ranpak's customers span across a variety of industries including automotive parts, electronics, eCommerce, machinery and home goods. Our customers include Amazon, IKEA, Sephora, Misfit Market and BMW. Ranpak's corporate headquarters are in Concord Township, Ohio with European headquarters in Eygelshoven, the Netherlands and Asia Pacific headquarters in Singapore City, Singapore, respectively. Additionally, a new state-of-the-art building opened in Shelton, CT. Ranpak Holdings Corp. is a New York Stock Exchange listed company (NYSE: PACK). Summary Assembling and testing automated packaging solutions. Assembling mechanical, electrical and pneumatic component according to drawing, electrical schematics and instructions. Following and keeping track of project schedules. Collaboration with engineering, inventory, service and shipping departments. This job description is intended to convey information essential to understanding the scope of the Assembler position and it is not intended to be an exhaustive list of skills, efforts, duties, responsibilities or working conditions associated with the position. Essential Duties & Responsibilities Reading and following assembly drawing and assembly instructions. Assemble, squares and aligns sub-assembly and structural components, on floor or floor plate. Installing the sub-assembly components on main frame according to drawing and instruction manuals. Mount, connect and adjust pneumatic component. Install and align conveyance systems. Reading and wiring according to the electrical schematics. Lays our diagram for electrical installations according to wiring specifications. Mount and wire electrical components including motors, sensors, actuators, robotic arms, etc. Follow and install all the safety requirements of the system. Modifying component according to engineering request. Drill and tap holes, cutting slots, cutting parts, opening holes, grinding surfaces, rewire and change electrical components. Report issues to the supervisor, engineering and quality team. Test and adjusts mechanical and electrical assemblies following the assembly instructions and check lists. Run the equipment and help with the FAT (Final Acceptance Test). Collaborate with the service department. Help install the equipment on the customer site. Following the project schedule and keeping truck of the production order schedule. Reporting the issues to the schedule to the supervisor. Accurate control of inventory using production orders. Collaborate with inventory for maintaining all needed parts for the project. Navigate to our Inventory, Project and File Management systems. Forklift Operation trained or willing to have Forklift Operation Training. Other Duties As assigned by your manager Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and /or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Supervisory Responsibilities None Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform he essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to lift 50 - 80 pounds. Training High School of GED. Any technical school training in Industrial Electronics, Schematics or Blueprints helpful but not required. Decision Making Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Work Environment The work environment characteristics described here are representative of those an employee encounters while preforming the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EOE STATEMENT We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

Power-Flo Technologies is seeking an assembler to join our New Hyde Park shop. We design and build custom switchboards and panelboards for a variety of customers. Full Time, Monday - Friday, 7 AM - 3:30 PM. Pay Range: $18 - $22/hour Competitive Benefits Package * Health coverage (medical, dental, vision) * PTO and Paid Holidays * 401K * EAP Assembler Required Skills * Previous experience or training in a shop/industrial setting * Mechanically inclined * Familiar with taking measurements and working with a ruler * Familiar with assembling components * Able to follow instructions in a proper manner * Familiar with shop tools (hand tools, power tools, etc) * Valid and clean driver's license to operate company vehicles as needed Assembler Daily Tasks * Reading and understanding blueprints prior to starting a project * Sourcing the materials to be used in the project * Measuring and cutting materials to specifications * Assembly of switchboard enclosures and interior electrical components * Preparing metal surfaces for finishing * Working with design team to complete switchgear packages * Checking finished work to make sure that it falls within the tolerances marked on the blueprints * Preparing completed packages for shipment Assembler Physical Requirements * Ability to safely use and lift equipment weighing 50 lbs. * Ability to work standing up to 8 hours per day. * This position occasionally requires sitting, climbing, balancing, stooping, kneeling, crouching, and crawling. * Exposure to dust, loud noise, and temperature changes. Candidates must have a valid and clean NY State driver's license to operate company vehicles as needed. About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Hamilton Connection of Milford Is currently looking to fill an opening for a first shift production - assembler, with a growing local area company. Prior manufacturing, assembly, and/or inspection experience is required. This position are full-time and offer the chance to get hired on permanently with a great company. These positions are on the 1st shift: 7:00am until 3:30pm, but overtime may be required at times. Pay Rate: $17.00 per hour to start - with an increase after training is completed. For more information please respond to this posting or you may also call our office at ************. You can also apply in person to our Milford Office - 14 Broad Street (located in downtown), Milford, CT 06460. Our office hours are Monday through Friday 8am-5pm.

Schivo Medical manufactures a diverse range of essential medical technology solutions. Working with us, you will be manufacturing or supporting the manufacture of a vast array of different products including robotic surgery instruments, neurosurgical tools, and cardiovascular closure devices that treat chronic disease in new ways so people can live better and longer. As an employee of Schivo Medical, you will tackle a wide array of problems, including some of the world's greatest medical challenges. We are seeking to hire a part time worker.. ***Must work Saturday and Sunday and one day during the week**** Assembly/Product sorter Job Description: Assembler/Visual Sorter sort parts, organizes, and completes visual checks on parts using a microscope. Essential Duties and Responsibilities: Daily secondary processing of components including but not limited to assembly, visual inspections, gauge inspections. Understand various documentations, Follow Travelers, work instructions, secondary operation report, and blueprints. Assemble components to meet the final desired standard. Visual inspection in accordance with acceptance criteria Use various measuring instruments for dimensional inspections. Inform supervisor of any major defects/issues with components Skills: Great hand and eye coordination Ability to multi-task in a fast-paced environment Attention to detail and organized in general. Education: High school diploma or a GED Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

Open Scientific provides contract staffing and direct hire recruitment services for the scientific, engineering, laboratory and manufacturing sectors. Job Description An ever growing medical company is looking for Production Workers . This is a great opportunity to for consistent and long term work. The ideal person must have previous experience working in a production environment. Must be comfortable standing for long periods of time Attention to detail Quality Inspection experience is a huge plus Documenting all aspects of the process Remove defective product and report it to the supervisor 1st shift, Pay: $13 per hour Submit your resume for consideration. Additional Information All your information will be kept confidential according to EEO guidelines.