Assembly line worker jobs in South Dakota

Job Description Shift: 7:00AM- 3:30PM Mon- Fri The Assembler is responsible for assembling fabricated parts and other components into small or light sub-assemblies and complete units. Assembler Essential Duties and/or Responsibilities: Assembles components of or final production using sub-assemblies, parts, and fasteners. Tests and calibrates parts and mechanisms to meet tolerances and product specifications. Hand tools and small power tools are used to assemble units. Relies on instructions and pre-established guidelines to perform the functions of the job. Maintains a clean and safe working environment Performs other duties as requested, directed, or assigned. Assembler Experience and/or Education: High School Diploma (or GED or High School Equivalence Certificate); Require 1+ year of related experience in a manufacturing environment Experience using hand tools and small power tools Assembler Essential Skills and/or Abilities: Knowledge of commonly used concepts, practices, and procedures within an assembly role. Ability to lift up to 50 lbs consistently Dependability is a must; must adhere to company attendance policy Strong attention to detail Strong quality and efficiency standards Ability to work both as a team or individually

KEY RESPONSIBILITIES: May be responsible for the kitting process. May maintain inventory counts of nuts, bolts, screws, metal, lumber, etc. Transport product, parts, and materials by using, forklift, pallet jack, or crane Understand and execute work orders provided by VSA's, VSL's or VSM's Work supportively with the appropriate departments to meet quotas and goals Observe all safety guidelines and report safety concerns to management Follow all shop orders and blueprints Able to use basic hand tools and read tape measure Maintains good housekeeping and clean work areas in assigned space Act, Live, and Behave by TCF Core Values. Additional duties may be assigned, dependent upon location and product line. QUALIFICATIONS: High school diploma or GED preferred. Experience working in a Manufacturing Environment preferred Ability to work in a fast-paced environment Must be able to understand verbal and written instructions Troubleshoot problems and report issues Must work well in team environment Based on department, may be required to operate a forklift, overhead crane, and electric pallet jack. CERTIFICATIONS, LICENSES, REGISTRATIONS AND REQUIRED TRAINING The following certifications and training, if required, will be provided by the company: JSA completion, Forklift Operations, PPE identification and usage, Crane Training, hazard awareness/identification, Lift table operations, Rigging safety Understands SQDE Metrics, LDMS, Issue boards, 5S PHYSICAL DEMANDS/WORKING CONDITIONS: To successfully perform the essential function of this position, employees must have the ability to: Continuously lift/move 10 pounds; frequently lift/move up to 25 pounds and occasionally lift/move up to 50 pounds. Continuously stand; walk; bend/stoop, use hands to finger, handle or feel; reach with hands and arms above shoulder height; stoop, kneel, crouch or crawl; talk; and hear. Occasionally climb, balance, kneel, reach with hands and arms at waist level and below the waist, and work in limited space. Specific vision abilities required include close vision, color vision, distance vision, peripheral vision, and depth perception. WORK ENVIRONMENT: While performing the duties of this position, the employee is continuously exposed to moving mechanical parts and extreme heat. The employee is occasionally exposed to high places, fumes, or airborne particles and/or caustic chemicals. The noise level in the work environment is usually loud. SAFETY Twin City Fan is dedicated to providing a safe and healthy work environment. Every employee must understand and continually work within the safety and health rules and policies. The use of good judgment and common sense is critical to workplace safety and Twin City Fan expects every employee to work in a safe and conscientious manner. This job description does not constitute a written or implied contract of employment, nor is it an all-inclusive list of responsibilities. Twin City Fan Companies, Ltd. reserves the right to revise or change job duties and responsibilities as business needs arise. Qualifications are representative of minimum levels of knowledge, skills, and experience required.

Job Description Here at Alcom we believe in our mission, vision, and values. Mission: To be the most influential partner in the trailer industry. Vision: To become the market leader in innovative, quality transportation solutions through an unmatched commitment to our employees and customers. Values: Customer Focus, Integrity, Problem Solving, Teamwork The Production Worker is responsible for performing all tasks involved in the production of aluminum trailers. This includes measuring, cutting, and drilling of aluminum and plywood. Apply in person - 501 E 52nd St N, Sioux Falls, SD 57104 M-Th 6:00a - 4:30p | Friday Overtime Potential Heath Insurance Dental & Vision Insurance Short-Term & Long-Term Disability Paid Holidays and Paid Vacation Paid Life Insurance 401(K) plan with 4% match FUNCTIONS AND RESPONSIBILITIES: Assembles different facets of a trailer, including but not limited to: inside trim, fenders, rough or finish wiring, and framing in accordance with the work Balances productivity with quality and safety. Reads and follows blueprints and work orders ensuring a quality product that meets customer demands; performs work as assigned by line. Obtains raw materials from Material Handlers. Cuts material in accordance with specifications on the cut. Notifies supervisor of any mechanical or material issues including but not limited to, defects in material, damage to the trailer, and deviations from work. Ensures that finished product meets quality expectations. Strives for the highest level of quality and understands the need for continuous improvement; supports the concept of “good enough is never good enough.” Maintains a clean and safe work area; works to minimize scrap, places unused material back in appropriate area, and disposes of waste. Follows all safety procedures, wears appropriate personal protective equipment (PPE), and reports any accidents or near misses to supervisor. Performs other related duties and assignments as required. Alcom USA is proud of its diverse workforce and welcomes employees who speak one or more languages. As a necessity to safely and efficiently perform business operations, employees must be proficient in speaking and understanding English. Alcom will assess the level of fluency required on a job by job basis. Employees must be able to speak and understand English for job related communications and are otherwise welcome to speak their native or other language in the workplace. EOE

Production Workers Needed! All Shifts available! GREAT COMPANY THAT TREATS YOU LIKE FAMILY! We have an excellent career opportunity to work in Production, performing manufacturing tasks with great hours and overtime possibilities in Yankton, SD! This is an excellent position for a highly motivated individual who has the ability to multitask while staying on task. Job Duties: Perform all tasks involved in manufacturing production processes. Follow standard work methods and practice safe work habits. Complete paperwork as needed. Report any issues or concerns to the supervisor. Operate equipment as trained and maintain a steady pace of line production. Organize materials and items on racks, shelves, or bins. Record time, quantity, and quality of work orders. The supervisor assigns all other duties. Apply Today! Pay: $21.00/HR DOE plus shift differential for 2nd and 3rd shifts. Shift: All shifts available. 1st, 2nd and 3rd. Why work for Advance Services, Inc. Advance Services is for and about people; we are your employment specialists. Enjoy our easy application process. You NEVER pay a fee! Weekly pay. Fun Safety and attendance incentives. Health Benefits to keep you and your family healthy. Great Referral Incentives. Advance Services partners with the top companies in the area! Apply for this job by clicking the apply button. You will be directed to our website, *********************** Please select a branch near you or call our office at ************. Stop in and see our experienced, bilingual, and friendly staff today at 1800 Broadway, Suite 2, Yankton, SD 57078. Advance Services is an equal opportunity employer.

Join our Team: Assembler Watertown, SD $1,000 Sign on Bonus $500 paid at 6 months of employment, $500 paid at 1 year of employment. Must be an active employee at time of payout to collect the bonus. Join our team at Terex Utilities and embark on an exciting opportunity as we seek a skilled and dedicated Assembler to contribute to the Terex team in Watertown, SD. At Terex we believe in fostering a vibrant and inclusive work culture where every person is empowered to thrive. We're dedicated to driving quality, innovation, embracing diversity, and creating an environment where everyone feels valued and respected. We're committed to excellence in everything we do, and we're seeking talented individuals who share our passion and values to join our team. What you'll do * Adhere to Terex safety policies and procedures * Perform repetitive assembly and adjustments of electrical, mechanical, and/or hydraulic equipment according to instructions * Manufacture fiberglass components to specifications * Maintain clean work area and participate in 5s standards * Troubleshoot basic issues and problems * Follow and promote The Terex Way Values What you'll bring * High school diploma and/or equivalent experience * 0-2 years of manufacturing experience * Able to lift up to 40 lbs and 40-100 lbs with assistance of others or lifting equipment provided * Possess good mechanical aptitude * Capable of using most hand tools * Understand and follow verbal and written instructions * Recognize potential safety hazards and take appropriate actions to minimize risks * Ability to read and understand blueprints, order acknowledgement, engineering drawings and written instruction * Function as a team member and contribute to group goals while maintaining a positive attitude Why Join Us * We are a global company, and our culture is defined by our Values - Integrity, Respect, Improvement, Servant Leadership, Courage, and Citizenship. Check out this video! The Terex purpose. * Safety is an absolute way of life. We expect all team members to prioritize safety and commit to Zero Harm. * Our top priority is creating an inclusive environment where every team member feels safe, supported, and valued. * We make a positive impact by providing innovative solutions, engaging our people, and operating in a sustainable way. * We are committed to helping team members reach their full potential. * Through innovation and collaboration, our vision remains forward-looking, and we aim to be a catalyst for change, inspiring others to build a better world for generations. * We offer competitive salaries, health insurance (medical, dental, vision, Rx), life insurance, accidental death & dismemberment (AD&D), short-term and long-term disability, extended leave options, paid time off, company holidays, 401k matching, employee stock purchase plan, legal assistance, wellness programs, tuition reimbursement and discount programs. * For more information on why Terex is a great place to work click on the link - Careers | Terex Corporate The compensation range for this position is $21.00-$22.50 per hour. Pay is based on several factors including but not limited to education, work experience, certifications, etc. This above description is non-exhaustive and there may be additional duties in accordance with the role. If you are interested in an open position but feel you may not meet all the listed qualifications, we still encourage you to apply. About Terex: Terex Corporation is a global industrial equipment manufacturer of materials processing machinery, waste and recycling solutions, mobile elevating work platforms (MEWPs), and equipment for the electric utility industry. We design, build, and support products used in maintenance, manufacturing, energy, minerals and materials management, construction, waste and recycling, and the entertainment industry. We provide best-in-class lifecycle support to our customers through our global parts and services organization, and offer complementary digital solutions, designed to help our customers maximize their return on their investment. Certain Terex products and solutions enable customers to reduce their impact on the environment including electric and hybrid offerings that deliver quiet and emission-free performance, products that support renewable energy, and products that aid in the recovery of useful materials from various types of waste. Our products are manufactured in North America, Europe, and Asia Pacific and sold worldwide. Additional Information: We are passionate about producing equipment that helps improve the lives of people around the world and providing our team members with a rewarding career and the opportunity to make an impact. We are committed to recruiting, engaging, developing, and retaining team members at all levels of our global workforce. Our culture is defined by our Terex Way Values - Integrity, Respect, Improvement, Servant Leadership, Courage, and Citizenship. Our values are the driving force behind our commitment to maintain an inclusive, supportive, non-discriminatory, and safe workplace for all team members. To that end, we are committed to actively foster a culture where every team member feels valued, listened to, and appreciated. We are committed to being fair and impartial in our decisions. As an Equal Opportunity Employer, employment decisions are made without regard to race, color, religion, national origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. If you are a qualified individual with a disability, including disabled veterans, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site as a result of your disability. You can request reasonable accommodations by contacting the recruiting department (person or department) at **********************************. The Company offers competitive salaries, advancement opportunities, and a full range of benefits, including paid vacation, 401(k), medical, dental, and vision.

Hurco Technologies, located in the Harrisburg industrial park, manufactures a diverse line of equipment that is used in the municipal market. We have an exciting opportunity for right person! For more information on our product line and about our company visit HurcoTech.com Assembly positions will primarily involve assembling hydro excavation systems (mounting components, wiring and routing hoses) and boom mounted hydraulic systems. Benefits include - Paid holidays, Vacation, Health insurance, 401K, and Great pay! REQUIREMENTS: Minimum Experience and Qualifications: Work in a fabrication setting Strong communication skills Must be able to lift 40lbs Critical thinking skills

Description & Requirements Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. Join the Smurfit WestRock team in Sioux Falls, SD as a Production Worker! Available Shift(s): Must be able to work any shift in a three-shift operation. * 1st Shift: 6 AM - 2 PM * 2nd Shift: 2 PM - 10 PM * 3rd Shift: 10 PM - 6 AM * New employees typically train on days for the first three weeks of work, then transfer to an off shift. Starting Wage Range: $20.18/hr, with increases ranging from $20.50 - $23.92 after 60 days Additional Incentives * Shift Differentials ($0.55/hr for 2nd Shift, $1.00/hr for 3rd Shift) * Health Insurance (Medical, Dental, Vision) available after 60 days * Life Insurance and Short-Term Disability * Paid Lunches and Breaks * 401(k) with Company Contributions * Paid Holidays and PTO Within the First Year * Reimbursements for Boots & RX Safety Glasses * Employee Referral Program * Tuition Reimbursement Primary Duties Include Safely performing a wide range of tasks supporting the manufacturing of corrugated boxes, conducting quality checks, material set-up, machine set-up and maintaining a clean and organized workspace. The ideal candidate will have a strong commitment to working safely, a demonstrated ability to work in a fast-paced environment, and a strong desire to learn manufacturing processes and operate complex machinery. Responsibilities include, but are not limited to: * Operating manufacturing equipment/powered equipment safely and follow specific directions * Maintaining a clean work environment * Ability to read a tape measure and have basic math and computer skills. * Ability to work safely and comply with all safety regulations. * Ability to push, pull, bend, squat, life, reach, kneel, and stand for up to 12 hrs a day. * Must be able to push, pull or lift up to 50 lbs on a frequent basis. * Required to work daily overtime, weekend work and various shifts depending on workload. * Must be willing to work any available shift. * Manufacturing experience preferred but not required. * Other duties as assigned Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by state or federal law.

Job Description At Astec-Yankton, formerly known as Kolberg-Pioneer, our mission is to design, build, and capitalize on the most innovative solutions and products for the industries and customers we serve globally. Our employees thrive in a safe and team-oriented work environment where they are empowered to make suggestions for operational and sustainability enhancements. With safety as our first core value, we take pride in developing talent and invest in training, protective equipment, and technology for continuous improvement. If you share our dedication to advancement and quality services, we'd love to have you join us! The Assembly Mechanic safely performs a variety of tasks to correctly assemble, fit, and join components in the production process of heavy and large mechanical products, per specifications and in accordance with the production schedule. You'll use various hand tools, pneumatic tools, hydraulic tools, and precision measuring instruments to complete work tasks. Our Evening Shift hours are Week 1: Monday-Thursday 2:55 pm - Between 1:30 am & 3:00 am depends on overtime needs. This position is Sign-On Bonus eligible! What You'll Do: • Use tools properly to make or repair parts and products. • Comply with all company and industry safety requirements. • Accurately follows documents, such as diagrams, schematics, blueprints, or other verbal or written instructions. • Identify any defective items and handle them according to established procedures. • Assembles component parts, machined parts, and subassemblies • Use and understand assembly instructions, blueprint specifications, and part lists • Uses various hand tools, pneumatic tools, hydraulic tools, and precision measuring instruments to complete tasks • Operates overhead cranes and forklifts to move parts and materials in and out of work area and to assemble large components • Performs minor adjustments, repairs, or setups to equipment or machines under supervision • Perform all required job functions in a safe manner consistent with plant safety standards and report any problems immediately to the team leader or Department Supervisor. Why You'll Love Working for Us: • Health, Dental, Vision- Day 1 Eligibility • Life, and Spousal Insurance • Health Savings and Flexible Spending Accounts • Short-Term and Long-Term Disability • 401(k) with Company Match • PTO • Employee Wellness Programs, Tuition Aid, and Employee Assistance What We Need from You: • High School diploma or GED preferred • Read/understand job-related blueprints • Ability to read tape measure; candidate will complete a tape measure assessment • Willingness to train/work during hours outside of regularly-scheduled core shift. • Heavy equipment manufacturing experience desired. • Knowledge of commonly used mechanical concepts, practices, and procedures required. • Ability to correctly use and read a tape measure • Ability to correctly read/understand job-related blueprints and drawings, required. • Able to operate overhead cranes and forklifts preferred. • Adept at problem-solving. • Ability to satisfactorily work alone with reasonable and appropriate instructions, training, and supervision, and ability to work with others respectfully and professionally in a team environment. • Ability to communicate clearly and completely, expressing needs, and asking questions. • Ability to sufficiently carry out detailed and written and/or oral instructions. • Ability to handle the demand that accompanies production standards and deadlines. • Ability to accept constructive criticism and make subsequent adjustments, and willingness to rework incorrect tasks completed by oneself or others. • Computer experience desired, particularly the ability to use a mouse, and locate and open/close files. • Must be dependable, dedicated to completing work assignments correctly, and use time wisely. ASTEC is a Drug Free Workplace, Affirmative Action, and Equal Opportunity Employer. We do not discriminate based on race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. At ASTEC, we value diversity and strive to create a welcoming and inclusive workplace. We recognize that some highly qualified women may not apply for roles due to systemic barriers. We encourage all qualified applicants to apply, and are committed to providing a fair and equitable hiring process for all candidates.

At Astec-Yankton, formerly known as Kolberg-Pioneer, our mission is to design, build, and capitalize on the most innovative solutions and products for the industries and customers we serve globally. Our employees thrive in a safe and team-oriented work environment where they are empowered to make suggestions for operational and sustainability enhancements. With safety as our first core value, we take pride in developing talent and invest in training, protective equipment, and technology for continuous improvement. If you share our dedication to advancement and quality services, we'd love to have you join us! The Assembler safely performs a variety of tasks to correctly assemble, fit, and join components in the production process of heavy and large mechanical products, per specifications and in accordance with the production schedule. You'll use various hand tools, pneumatic tools, hydraulic tools, and precision measuring instruments to complete work tasks. What You'll Do: • Use tools properly to make or repair parts and products. • Comply with all company and industry safety requirements. • Accurately follows documents, such as diagrams, schematics, blueprints, or other verbal or written instructions. • Identify any defective items and handle them according to established procedures. • Assembles component parts, machined parts, and subassemblies • Use and understand assembly instructions, blueprint specifications, and part lists • Uses various hand tools, pneumatic tools, hydraulic tools, and precision measuring instruments to complete tasks • Operates overhead cranes and forklifts to move parts and materials in and out of work area and to assemble large components • Performs minor adjustments, repairs, or setups to equipment or machines under supervision • Perform all required job functions in a safe manner consistent with plant safety standards and report any problems immediately to the team leader or Department Supervisor. Why You'll Love Working for Us: • Health, Dental, Vision- Day 1 Eligibility • Life, and Spousal Insurance • Health Savings and Flexible Spending Accounts • Short-Term and Long-Term Disability • 401(k) with Company Match • PTO • Employee Wellness Programs, Tuition Aid, and Employee Assistance What We Need from You: • High School diploma or GED preferred • Read/understand job-related blueprints • Ability to read tape measure; candidate will complete a tape measure assessment • Willingness to train/work during hours outside of regularly-scheduled core shift. • Heavy equipment manufacturing experience desired. • Knowledge of commonly used mechanical concepts, practices, and procedures required. • Ability to correctly use and read a tape measure • Ability to correctly read/understand job-related blueprints and drawings, required. • Able to operate overhead cranes and forklifts preferred. • Adept at problem-solving. • Ability to satisfactorily work alone with reasonable and appropriate instructions, training, and supervision, and ability to work with others respectfully and professionally in a team environment. • Ability to communicate clearly and completely, expressing needs, and asking questions. • Ability to sufficiently carry out detailed and written and/or oral instructions. • Ability to handle the demand that accompanies production standards and deadlines. • Ability to accept constructive criticism and make subsequent adjustments, and willingness to rework incorrect tasks completed by oneself or others. • Computer experience desired, particularly the ability to use a mouse, and locate and open/close files. • Must be dependable, dedicated to completing work assignments correctly, and use time wisely. ASTEC is a Drug Free Workplace, Affirmative Action, and Equal Opportunity Employer. We do not discriminate based on race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

Prepares building for shipping which may include shrink wrapping buildings, removing fixtures, and cleaning dust and dirt off building panels and components. Duties include: of unit component parts. Remove fixtures to help prepare building to be shipped. Clean dust and dirt off building panels and various components in building. Gather supplies and tools needed to complete jobs. Shrink wrap buildings to prepare for shipment. Complete work according to specified schedule and complete traveler documents in detail. Clean up work area and return tools and supplies to appropriate places each day. Work safely without presenting a direct threat to self or others. Perform additional duties as requested. Requirements Ability to follow verbal and written instructions Flexibility and ability to work under production pressure. Ability to work in cooperation with other team members. Experience working with basic hand tools and power tools. Must be able to stand on feet for long periods of time, work on knees for extended periods of time, work on ladders at heights and lift up to 50 lbs. Must be able to work in enclosed spaces for extended periods of time. Ability to perform basic math calculations and measurements. Forklift certification or ability to obtain certification. This position is located in Tea, SD. Salary Description $18-$21/hour

Job Family for Posting: Manufacturing Job Type for Job Posting: Full Time Apply now * Apply Now * Start applying with LinkedIn Start Please wait... About Us Innovation. Sustainability. Productivity. This is how we are Breaking New Ground in our mission to sustainably advance the noble work of farmers and builders everywhere. With a growing global population and increased demands on resources, our products are instrumental to feeding and sheltering the world. From developing products that run on alternative power to productivity-enhancing precision tech, we are delivering solutions that benefit people - and they are possible thanks to people like you. If the opportunity to build your skills as part of a collaborative, global team excites you, you're in the right place. Grow a Career. Build a Future! Be part of this company at the forefront of agriculture and construction, that passionately innovates to drive customer efficiency and success. And we know innovation can't happen without collaboration. So, everything we do at CNH Industrial is about reaching new heights as one team, always delivering for the good of our customers. Job Purpose Performs various aspects of assembly, test, and calibration of assemblies according to specifications. Key Responsibilities * Build assemblies using various tools and fixtures. * Verify standards are correct and product meets required specifications according to blueprints or process instructions. * May package products or assemblies, as needed. * Inspect assemblies for defects during various stages of production. * Perform tests on products as needed. * Maintain applicable records. * Perform high quality work. * Identify production related issues. * Demonstrates support for company culture in their daily actions. * May be called upon to perform comparable duties of a similar or related nature and/or assist in other areas as needed. * Learning, understanding, continuously improving, and promoting the quality management system in accordance with ISO standards. Experience Required * Minimum High School Diploma or equivalent. Preferred Qualifications * Team player who is self-motivated and has ability to work with minimal supervision. * Ability to work at a fast pace efficiently. * Ability to use hand tools, soldering irons, and press equipment. * Ability to read blueprints and work instructions and maintain accurate records, * Basic computer skills necessary. * Ability to communicate effectively with team members and leadership staff. Pay Transparency The annual salary for this role is USD $18.00 - plus any applicable bonus (Actual salaries will vary and will be based on various factors, such as skill, experience and qualification for the role.) What We Offer We offer dynamic career opportunities across an international landscape. As an equal opportunity employer, we are committed to delivering value for all our employees and fostering a culture of respect. At CNH, we understand that the best solutions come from the diverse experiences and skills of our people. Here, you will be empowered to grow your career, to follow your passion, and help build a better future. To support our employees, we offer regional comprehensive benefits, including: * Flexible work arrangements * Savings & Retirement benefits * Tuition reimbursement * Parental leave * Adoption assistance * Fertility & Family building support * Employee Assistance Programs * Charitable contribution matching and Volunteer Time Off Click here to learn more about our benefits offerings! (US only) US applicants: CNH Industrial is an equal opportunity employer. This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Applicants can learn more about their rights by viewing the federal "Know Your Rights" poster here. CNH Industrial participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. You can view additional information here. Canada applicants: CNH Industrial is an equal opportunity employer. This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, nationality, place of origin, disability, marital status, family status, age, or any other ground prohibited by applicable provincial human rights legislation. If you need reasonable accommodation with the application process, please contact us at ******************************. Apply now * Apply Now * Start applying with LinkedIn Start Please wait... {{video.content.cta}} {{video.content.title}} {{video.content.description}} × {{explore.title}} {{explore.description}} {{feed.title["#text"]}} {{feed.city["#text"]}}, {{feed.country["#text"]}} {{explore.cta}}

Objective of Position: Accessorizes trailers in final stages per customer specifications and Trail King standards. Principal Responsibilities: Installs all parts on all trailers and assemblies not installed prior to painting. Installs tires on trailers per order and torques down all wheels with a nut runner as per specifications. Installs stripes, company decals, informational and safety decals as specified. Verifies each order for each customer specification on equipment required. Touches up paint with aerosol spray cans and quart cup guns as needed. Adjusts brakes as directed. Handles, stores and disposes of all hazardous materials properly. Successfully completes annual training. Follow standard work and procedures. Position requires the operation of various equipment and tools required to perform job duties, examples include: overhead crane, forklift, all air tools, quart cup paint gun, aerosol paint cans, torque wrench, decking saws, etc. Position requires the use of a respirator when performing paint touch up. Position requires a pre-employment and an annual pulmonary function test (PFT) with acceptable results. Position requires the ability to move around, on and underneath (using a creeper) the trailers. Position requires handling of tires and torque wrench. Accurately cuts and install decking material on trailers Perform other duties as assigned. Position Qualifications: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position. Ability to use measuring tools and devices accurately. Ability to apply basic math skills with addition, subtraction, multiplication and division. Possess basic computer skills. Possess the ability to read and follow instructions Physical Demands & Work Environment: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position. Ability to work up to a 12 hour shift. Willing to fluctuate hours to accommodate needs While performing duties of job, employee is required to: stand, kneel, walk, sit, climb, bend, and twist; use hands to finger, handle and feel objects, tools or controls; reach with hands and arms; talk and hear. Employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. While performing the duties of this job, the employee is exposed to changes in temperature and humidity, exposure to dust, fumes and is near moving machinery. Upon initial assignment to an area where hazardous waste will be handled, training of management of hazardous waste must be conducted within six months of start date Annual training is required for management of hazardous waste including a review of the company contingency plan This position profile describes the general nature and level of work being performed by the employee and is not to be construed as an exhaustive list of responsibilities, duties, and skills required for this position. Furthermore, this position profile does not establish a contract for employment and is subject to change at the discretion of the employer.

The Assembler installs parts on and in cabs properly, timely, safely, and efficiently using summarized bills of material. Also responsible for setting up the area with all needed parts based on knowledge of the unit. This role inspects the material for any deficiencies and makes sure that all are corrected before moving the cab to the end of the assembly line. A successful candidate is a detail oriented, multi-tasker with the ability to handle assignments efficiently and accurately. KEY RESPONSIBILITIES: Sets up area by stocking parts bins and parts shelves with parts according to knowledge of unit being assembled using summarized bills of material. Fastens parts together with bolts, screws, rivets, or other fasteners as required. Installs windows, mirrors, wire harness, wipers, inside panels, lights, and other necessary components per assembly drawing using pneumatic as well as hand tools. Performs inspection to assure paint and cab meets quality standards, electrical systems work correctly, the cab does not leak, and to assure all parts are installed and installed correctly. Assures deficiencies are corrected as needed. Completes and forwards required paperwork. Moves completed cab to the end of the assembly line. Other duties as assigned. KEY SKILLS AND COMPETENCIES: Able to follow verbal and written instructions Basic math skills Ability to deal with standardized situations with as few variables as possible Ability to read assembly drawings Ability to frequently bend and stoop Must be able to stand for extended period of time and exert moderate to heavy physical effort with a minimum lifting requirement of up to 50 pounds Must be willing to travel as needed via most efficient means Must be physically able to access all areas of the plant and grounds Manufacturing experience a plus This position description is not intended to be an exhaustive list of all duties, responsibilities and competencies required of this position. Employees are held accountable for all aspects for the job, which are subject to change at any time. An individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Company Information We are dedicated to the belief that people are our most important asset. In filling job openings every effort is expended to find candidates within Crenlo, its divisions or subsidiaries. Employee development, opportunity to grow and continuing to evolve both as an employee and as a company are instrumental to our success. We encourage employees to inquire about open positions and apply to those that help further their career goals. Crenlo Engineered Cabs is an equal employment opportunity employer. Qualified applicants are considered regardless of race, color, religion, age, national origin, sex, disability, or veteran's status.

Driven by Possibility Gates Corporation is a leading manufacturer of application-specific fluid power and power transmission solutions. At Gates, we are driven to push the boundaries of materials science to engineer products that continually exceed expectations. We don't rest on our rich heritage of innovation. We leverage it to inspire solutions that will power the next hundred years. We invest continually in R&D and technology, so our products not only outperform industry standards; they exceed our customers' demanding expectations. We invest in our people, bringing real-world experience that enables us to solve our customers' diverse challenges of today and anticipate those of tomorrow. And we are constantly expanding our product catalog and value-added service offerings to support every facet of our customers' operations. In the most extreme environments and those more familiar, Gates is there with the right product, in the right place at the right time. Whether building original equipment or maintaining products in the aftermarket, we enable companies in every industry to be more efficient, productive, and profitable. We are Gates. Overview: Gates Corporation, formerly Atlas Hydraulics/Pace Manufacturing, is growing in Brandon, SD and we are hiring for Assemblers in our Hose and Tube Shop for our 1st shift (6am - 2pm). This position is part of the production team, reporting directly to the shift supervisor and/or team leader. Assemblers operate equipment to couple and form various sizes and product lines of hydraulic hose & tube assemblies. Job duties include performing assembly tasks utilizing a variety tools and machines working in a team supporting the safety, productivity, and delivery of high quality products. WORK REQUIREMENTS: • Attendance is an essential function of this position. The employee must have regular, reliable, punctual and consistent attendance. • Must be able to work 40 hours per week plus overtime. • Ability to read, understand and perform printed and verbal work instructions throughout all processes. • Constantly demonstrate safe working habits and follows all safety requirements. • Plans, evaluates, sets up and runs needed equipment - saws, crimpers, pushers, flushers, etc. and verifies compliance. • Operate machine controls including recognizing warning devices on machines throughout the process. • Examines materials visually or physically to ensure conformance with established standards. • Good communication skills. • Ability to thrive in a fast paced, high volume production environment. • Must be team-oriented individual who understands and supports the team approach to manufacturing. • Use of scanners & internal production systems • Proactively able to step in to support other team members as needed and share knowledge to allow cross training of all functions. • Other tasks or duties as assigned by supervision. PHYSICAL DEMANDS: Physical requirements require regular lifting, pushing, standing and pulling of product. Basic skill training for this position will be provided and measured. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. Most areas do not require hearing protection. All areas require steel toed shoes/boots and approved safety glasses. Brandon has a hearing conservation program in operations. This program is managed in compliance with OSHA guidelines and requires all employees to wear hearing protection while on the operations floor. Note: As part of the hiring process, all candidates who are qualified for employment with Gates Corporation must pass pre-employment drug screen, physical, employment verification and background screenings. The work environment described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Gates Corporation is an Equal Opportunity and Affirmative Action Employer and is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of race, sex, color, religion, age, disability, pregnancy, citizenship, sexual orientation, gender identity, national origin, protected veteran status, genetic information, marital status, or any other consideration defined by law.

Company Overview: Black Hills Truss, a Mead Lumber Company, is a leading provider of products for professional contractors, builders, and remodelers. With 50+ operating locations across nine Midwestern states, we are proud to be 100% employee-owned and ranked as the 12th largest building material supplier to professional builders in the U.S. At Mead Lumber, we strive to create a team that works and succeeds together every day in an authentic, team-oriented setting. Why Join Us? Employee Ownership: As a 100% employee-owned company, you will have a stake in our shared success. Work-Life Balance: Enjoy flexible scheduling options that support your lifestyle. Career Growth: We are committed to your professional development, providing ongoing learning and advancement opportunities. Job Summary: The Assembler is primarily responsible for safely, accurately, and efficiently assemble wood and metal components into a roof truss, floor truss, and/or wall panel finished products in accordance with design measurements and specifications. Key Responsibilities: Ensure that proper safety and incident reporting procedures are followed. Review engineering layout and cut sheets to verify the correct wood materials, lengths, grade, and size. Correctly set up the jig with team members for each specific truss in pre-production. Apply the correct plate sizes during assembly per computer aided design (CAD) software. Check quality of product and verify critical specifications such as heel height, seat cuts, depths, spans, and squareness of the truss. Assemble the truss with the assigned team. Plan and pace work to equal the lead assembler. Achieve daily, weekly, project and team related productivity goals as determined by Production Management. Ensure all components comply with required standards from the Truss Plate Institute (TPI) and other relevant regulatory agencies. Stack and bundle all trusses: Verify all orders are correctly marked. Move finished products to the yard and assemble bundling blocks. Maintain a clean job site: Collect all tools and equipment. Secure job site to eliminate potential hazards. Restock connector plates as needed. Other duties as assigned. Desired Skills, Knowledge, and Qualifications: Lift heavy objects up to 75lbs or more, walk and stand for long periods of time and perform strenuous physical labor under adverse field conditions. Bend, push, pull, twist, and squat frequently, Use hammer and nail guns frequently during the shift, climb and descend from elevated tables frequently. Correctly read a tape measure to the sixteenth of an inch quickly and with no errors. Knowledge of proper use of equipment, materials and supplies used in construction work including; nail gun, hammer, forklift, press machine, tape measure and saws. High School diploma or any combination of education or experience that demonstrates the knowledge and ability to perform the work. Previous experience working in a truss or panel plant is preferred. Ability to effectively operate in a team environment. Solid work history with a proven track record of successes in carpentry or manufacturing. Ability to effectively follow verbal and written instructions. Be coachable by team members and leadership. Supply basic hand tools: measuring tape (25 ft. or more) and a framing hammer (20 oz. or larger). Operate with a team in a fast-paced and loud environment. Once eligible, you will participate in our ESOP (Employee Stock Ownership Plan), a unique benefit that can provide a financial source for your future/retirement that very few companies offer. We also offer our employees competitive pay as well as the benefits listed below: Additional Benefits Include: Medical, Dental, and Vision Plans 100% Employer Paid Group Term Life, AD&D, and STD Additional Voluntary Life, AD&D, and LTD Paid Time Off & Holiday Pay Flexible Spending Accounts 401(k) Plan Scholarship & Tuition Assistance Programs Employee Assistance Program Equal Employment Opportunity: Mead Lumber Company is an Equal Employment Opportunity Employer. We consider applicants for all positions without regard to race, color, sex, ethnicity, national origin, religion, gender, age, pregnancy, marital status, veteran's status, sexual orientation, genetic information, disability, or any other protected basis prohibited by law.

TempToFT Assembler REPORTS TO: Assembly Supervisor / Team Lead WAGE: $16/hr 1st shift (6:00am-4:30pm) PRIMARY PURPOSE: Assembles industrial fans and confirms that all parts and accessories are properly fitted and attached per Client engineering and quality standards. KEY RESPONSIBILITIES Operates bridge crane/fork lift/pallet jack to bring fans to work station and/or testing area; safely operates lift table to bring work up to a comfortable working height (if applicable). Reads and interprets blueprints; checks shop orders to ensure that all necessary parts and accessories are readily available; and finds all necessary parts and accessories that are not with the current parts. Positions parts and examines connections for correct fit; resolves assembly and production issues; reports quality issues and errors in production line; and informs supervisor of any shortages in parts or hardware Arranges shaft and bearings and ensures that the center of the shaft is in the center of the housing and has an equal distance in radius in all directions. Connects the prop and ensures that it is the correct size (if possible). Connects lube lines (copper, plastic, stainless steel). Connects the motor and belt alignment. Uses appropriate tools to assemble and fasten all parts on the fan assembly per Client engineering and quality standards. Wires all necessary wires correctly and safely. Removes small quantities of metal with hand files, scrapers, and die grinders to ensure proper fit between parts. Verifies that everything from the shop order is completed prior to signing off on each unit. Act, live, and behave by Client Core Values Additional duties may be assigned, dependent upon location and product line QUALIFICATIONS High school diploma or GED. 6+ months' experience and/or training (technical school) or equivalent combination of education and experience. Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals written in English. Basic math skills to include addition, subtraction, multiplication and division in all units of measure including whole numbers, fractions and decimals. Ability to read a tape measure. Ability to use tools in a safe and proper manner. CERTIFICATIONS, LICENSES, REGISTRATIONS AND REQUIRED TRAINING The following certifications and training, if required, will be provided by the company: Forklift Certificate Bridge Crane Training Fall Protection Training PHYSICAL DEMANDS/WORKING CONDITIONS To successfully perform the essential function of this position, employees must have the ability to: Continuously lift/move 10 pounds; frequently lift/move up to 25 pounds; and occasionally lift/move up to 50 pounds. Continuously stand; walk; use hands to finger, handle or feel; reach with hands and arms above shoulder height; stoop, kneel, crouch or crawl; talk; and hear. Occasionally climb, balance, stoop, kneel, reach with hands and arms at waist level and below the waist, and work in limited space. Specific vision abilities required include close vision, color vision, distance vision, peripheral vision and depth perception.

Full-time Description Personality Profile Persona is searching for a Final Assembler. This hard worker needs to be accurate, patient, analytical and precise with a drive to do things right the first time. You will be valued for your accuracy and loyalty. Job Summary Wiring signs for ballasts, sockets, and other lighting applications as well as cutting, installing trim and service doors into sign frames. Job Responsibilities · Operate and maintain power shears, grinders, sanders, router, hipot tester, screw gun, drill, air riveter, and other tools. · Use overhead crane to move large frames and use cutting torch and/or plasma cutter for cutting and installing service doors. · Read and understand job packet to include reading diagrams for wiring. · Record necessary data ie: materials used, time cards, etc. · Observe company safety rules and practices. · Maintain assigned equipment. · Operate 12' and 4' shears. Requirements Education and Experience · High School diploma or GED required · Manufacturing experience preferred Knowledge, Skills, and Abilities · Electrical experience preferred · Cognitive thinking skills · Ability to read tape measures and follow measurements · Read tape measures and performing simple math ie: %, angles, radius, sq.ft., etc. Salary Description $18 and up DOE

Job Description The Lawn and Garden Sub Assembler is responsible for assembling fabricated parts and other components to relatively small or light sub-assemblies and complete units. Assembler Essential Duties and Responsibilities: Assembles components of or final production using sub-assemblies, parts, and fasteners. Tests and calibrates parts and mechanisms to meet tolerances and product specifications. Uses hand tools and small power tools to assemble units. Relies on instructions and pre-established guidelines to perform the functions of the job. Maintain clean and safe working environment Performs other duties as requested, directed or assigned. Assembler Experience and Education: High School Diploma (or GED or High School Equivalence Certificate) Require 0-2 years of experience in manufacturing or in a related area Works under immediate supervision We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law

KEY RESPONSIBILITIES: May be responsible for the kitting process. May maintain inventory counts of nuts, bolts, screws, metal, lumber, etc. Transport product, parts, and materials by using, forklift, pallet jack, or crane Understand and execute work orders provided by VSA's, VSL's or VSM's Work supportively with the appropriate departments to meet quotas and goals Observe all safety guidelines and report safety concerns to management Follow all shop orders and blueprints Able to use basic hand tools and read tape measure Maintains good housekeeping and clean work areas in assigned space Act, Live, and Behave by TCF Core Values. Additional duties may be assigned, dependent upon location and product line. QUALIFICATIONS: High school diploma or GED preferred. Experience working in a Manufacturing Environment preferred Ability to work in a fast-paced environment Must be able to understand verbal and written instructions Troubleshoot problems and report issues Must work well in team environment Based on department, may be required to operate a forklift, overhead crane, and electric pallet jack. CERTIFICATIONS, LICENSES, REGISTRATIONS AND REQUIRED TRAINING The following certifications and training, if required, will be provided by the company: JSA completion, Forklift Operations, PPE identification and usage, Crane Training, hazard awareness/identification, Lift table operations, Rigging safety Understands SQDE Metrics, LDMS, Issue boards, 5S PHYSICAL DEMANDS/WORKING CONDITIONS: To successfully perform the essential function of this position, employees must have the ability to: Continuously lift/move 10 pounds; frequently lift/move up to 25 pounds and occasionally lift/move up to 50 pounds. Continuously stand; walk; bend/stoop, use hands to finger, handle or feel; reach with hands and arms above shoulder height; stoop, kneel, crouch or crawl; talk; and hear. Occasionally climb, balance, kneel, reach with hands and arms at waist level and below the waist, and work in limited space. Specific vision abilities required include close vision, color vision, distance vision, peripheral vision, and depth perception. WORK ENVIRONMENT: While performing the duties of this position, the employee is continuously exposed to moving mechanical parts and extreme heat. The employee is occasionally exposed to high places, fumes, or airborne particles and/or caustic chemicals. The noise level in the work environment is usually loud. SAFETY Twin City Fan is dedicated to providing a safe and healthy work environment. Every employee must understand and continually work within the safety and health rules and policies. The use of good judgment and common sense is critical to workplace safety and Twin City Fan expects every employee to work in a safe and conscientious manner. This job description does not constitute a written or implied contract of employment, nor is it an all-inclusive list of responsibilities. Twin City Fan Companies, Ltd. reserves the right to revise or change job duties and responsibilities as business needs arise. Qualifications are representative of minimum levels of knowledge, skills, and experience required.