Assembly line worker jobs in Temecula, CA

RELOCATION ASSISTANCE: No relocation assistance available CLEARANCE TYPE: SecretTRAVEL: NoDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. At the heart of Defining Possible is our commitment to missions. In rapidly changing global security environments, Northrop Grumman brings informed insights and software-secure technology to enable strategic planning. We're looking for innovators who can help us keep building on our wide portfolio of secure, affordable, integrated, and multi-domain systems and technologies that fuel those missions. By joining in our shared mission, we'll support yours of expanding your personal network and developing skills, whether you are new to the field, or an industry thought leader. At Northrop Grumman, you'll have the resources, support, and team to do some of the best work of your career. We are looking for you to join our team as an Assembler 2 based out of San Diego, CA. What you'll Get to do: Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws Continuously checks on work in process and completed Conducts quality inspections on processing line in accordance with quality specifications Disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions. Basic Qualifications: High School diploma or GED with 2 years of experience in electronics manufacturing, Assembly, or related field J-STD-001 solder certification, or similar experience or certifications The ability to obtain and maintain a DoD Secret Security Clearance is required U.S. citizenship required Preferred Qualifications: Active DoD Secret clearance SAP clearances/experience Advanced education and/or experience assembling and troubleshooting RF and/or CNI systems IPC-A-620 Standard certification for cable and wire harness assemblies including crimped, soldered and mechanically secured connections Experience with shop floor manufacturing systems (SAP, Solumina, Tableau, etc.) Experience with ESD (electrostatic discharge) and FOD (foreign object damage) control. Experience with CUI (controlled unclassified information) and COMSEC (communications security). Experience with FAR, ITAR, AS9100, and/or ISO 90001 rules and regulations. What We Can Offer You: Northrop Grumman provides a comprehensive benefits package and a work environment which encourages your growth and supports the mutual success of our people and our company. Northrop Grumman benefits give you the flexibility and control to choose the benefits that make the most sense for you and your family. Your benefits will include the following: Health Plan, Savings Plan, Paid Time Off and Additional Benefits including Education Assistance, Training and Development, 9/80 Work Schedule (where available), and much more! Primary Level Salary Range: $42,000.00 - $70,000.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Under minimum supervision, optical and mechanical assembly performs moderate complexity, sometimes requiring fitting, alignment and adjustment of optical/mechanical components and sub-assemblies. Capable of working with very close tolerances. Primary Duties & Responsibilities Optical-Mechanical Assembly Clean and assemble various optical parts, opto-mechanical sub-assemblies, and large assemblies. Use of hand tools requiring above average level of manual dexterity and knowledge of proper procedures. Solder onto various parts as required by assembly instructions. Direct handling and cleaning of delicate optical components. Familiarity with weighing, mixing, and outgassing RTV's, epoxies, and adhesives. Understanding and usage of different chemicals and solvents. Skills & Other Requirements Mathematical Skills Ability to calculate figures and perform simple addition, subtraction, multiplication and division of whole numbers, decimals and fractions. Ability to use a scientific calculator and perform basic calculations. Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to communicate in English and speak effectively before small groups of employees in the organization. Reasoning Ability Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Ability to anticipate problems and proactively identify potential problems. Primary Duties & Responsibilities • High School Diploma or (GED) • Work Experience - Minimum of 2 years of experience in similar assembly operation. High level of manual dexterity, knowledge of a wide variety of hand tools, and knowledge of soldering. Working Conditions Regularly required to: Sit, use hands and fingers, and reach with hands and arms Demonstrate a high level of manual dexterity and care when handling delicate parts Frequently required to: Talk and hear Stand, walk, stoop, kneel, crouch, or crawl Physical Requirements Must be able to lift and/or move: Up to 10 pounds frequently Up to 50 pounds occasionally, with or without assistance Vision requirements include: Close vision, distance vision, depth perception, and ability to adjust focus Ability to inspect parts using an eye loupe and read small graduations on a micrometer and depth gauge Must be able to wear safety gear for extended periods of time Safety Requirements All employees are required to attend scheduled training, follow the site EHS procedures and Corporate EHS standards. This includes the use of proper protective equipment (PPE) as required by the job responsibilities. Managers will ensure that all safety and environmental procedures are followed consistently. They will ensure that risk assessments are performed, proper training, work instructions, required PPE is available, and will monitor compliance. Quality & Environmental Responsibilities Depending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System. Culture Commitment Ensure adherence to company's values (ICARE) in all aspects of your position at Coherent Corp.: Integrity - Create an Environment of Trust Collaboration - Innovate Through the Sharing of Ideas Accountability - Own the Process and the Outcome Respect - Recognize the Value in Everyone Enthusiasm - Find a Sense of Purpose in Work Coherent Corp. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. To conform to U.S. Government export regulations (ITAR), applicant must be a U.S. person, lawful permanent resident of the U.S., protected individual as defined by 8. U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State." If you need assistance or an accommodation due to a disability, you may contact us at ****************************** .

Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. We are currently seeking Assembly Workers to join our team in San Diego, CA! Pay Rate- $18/hour Job Description: Assemble components and parts according to production specifications and blueprints. Conduct inspections of assembled products to ensure quality and compliance with standards. Use hand tools, power tools, and machinery to complete assembly tasks. Maintain a clean and organized work area to ensure safety and efficiency. Collaborate with team members to meet production goals and deadlines. Report any issues or discrepancies in assembly to supervisors. Follow all safety procedures and regulations in the workplace. Requirements Job Requirements: Previous experience in assembly work preferred but not required. Ability to read and understand technical specifications and blueprints. Strong attention to detail and quality control. Basic math skills for measurements and calculations. Ability to lift up to 50lbs and perform physical tasks as required. Must be able to work in a fast-paced environment. Reliable transportation is required. Must pass a drug test and background check. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Temp To Full-Time Skillset Group is seeking a Wire Harness Assembler to work in the Irvine, CA area. This position will under shop supervision the Inspect and perform work in accordance with IPC-A610 and other quality standards as needed. This will be a 1st shift position and will be contract to hire. To apply email: ************************* Pay: $30-$33/hr,

Job Details Timco-Tandem - Fontana, CA Full Time $19.75 - $20.75 Hourly None Any ManufacturingDescription Assists operators, to perform duties necessary to cast aluminum billet, sheet ingot or secondary aluminum ingot production. Also performs general production duties throughout the plant as necessary. The job description of "Production Worker includes the following job classifications: furnace helper, saw helper, stacker, casting helper, strapper, and any other entry level production position that may be developed in the future, unless a specific job title is designated. ESSENTIAL DUTIES AND RESPONSIBILITIES Assists in the direct chill casting of aluminum billet and slab ingot according to instructions. Using hand held tool(s) skims impurities from molten metal molds, furnace runners and boxes. Using cranes moves material or finished goods from casting pits to designated location. Assists in maintenance/cleaning of bag house, and associated equipment as needed. Assists in preparations for casting metal by preparing tools, coating molds, and runners. Hauls materials from storage or production areas to furnace production areas as required. Assist in skimming the molten metal pump. Assist in weighing alloying elements to be added to the furnace. Move materials from one location to another including un-piling-piling, un-stacking-stacking and strapping as required. Transports materials to scales, and weighs, tags, and records transports. Prepares finished metal or other material for shipment as required or directed. Keeps area and equipment clean, and in proper working order. Performs other duties as assigned by Management. Assist the mold shop by preparing molds. Qualifications Qualifications -Forklift experience preferred SKILLS AND ABILITIES Oral Comprehension: The ability to listen to and understand information and ideas presented through spoken words and sentences. Reaction Time: The ability to quickly respond (with the hand, finger, or foot) to a signal (sound, light, picture) when it appears, and the ability to quickly respond with clarity by verbal communication to announce danger and or signal safety concern. Oral Expression: The ability to communicate information and ideas in speaking so others will understand. Speech Clarity: The ability to speak clearly so others can understand you. Speech Recognition: The ability to identify and understand the speech of another person. Written Comprehension - The ability to read and understand information and ideas presented in writing. Identifying Objects, Actions, and Events - Identifying information by categorizing, estimating, recognizing differences or similarities (accurately compare similarities and differences among sets of letters, numbers, objects, pictures, and/or patterns.), and detecting changes in circumstances or events. Processing Information - Compiling, coding, categorizing, calculating (add and/or subtract numbers and multiply/divide with 10's and 100's), perform mathematical operations using units of America money and/or weight measurements, volume, and distance, tabulating, auditing, or verifying information or data Complex Problem Solving - Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions. Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. Attention - The ability to concentrate on a routine and generally repetitive tasks over a period of time requiring little or no independent action or diversification.

Job DescriptionShift: 1ST 7:00 AM - 3:30 PM $16.50 PRODUCTION 2ND 3:00 PM - 11:30 PM $18.00 PRODUCTION 3RD 11:00 PM -7:30 AM $20.00 SANITATION Under direct supervision, the Production Associate is responsible for performing basic product handling tasks to convert raw materials into finished goods. This position involves working with raw meat products, including pork, beef, and chicken, in a cool warehouse environment where the smell of spices is common. Key Responsibilities: Handle and process raw materials through various stages of production Move, weigh, form, mix, and package products according to company standards Maintain cleanliness and organization of the work area Follow all food safety and sanitation procedures Assist in setup, operation, and cleaning of production equipment Work Environment & Requirements: Must wear required PPE including hair net, safety glasses, smock, helmet, and safety shoes Ability to work in cool or refrigerated environments Must be able to stand for long periods and perform repetitive motions Reliable attendance and teamwork are essential Job Posted by ApplicantPro

•You are responsible for production activities to transform raw materials or semi-finished goods into finished products or services. Shift: 1st Shift Work Hours :Mon - Thur 6am - 430pm This is a 100% onsite job. The job location is San Marcos, TX 78666, USA What you'll do • Position, align, fasten, wiring and electrical components to form assemblies or subassemblies • Use hand tools • Use pneumatic drivers to secure fasteners • Participate in Lean Manufacturing Activities Minimum Qualifications Your qualifications • High School Degree or GED ) Degree not required • Ideally 2-5+ years of experience in manufacturing • Familiar with hand and pneumatic tools (drivers, screwdrivers, etc.) • Capable to work as part of a team • Ability to work in a dynamic environment

Production Line Machine Operator The Production Line Machine Operator is responsible for operating the dough production line machines to manufacture food products. PRIMARY RESPONSIBILITIES Press switches and turn knobs to start machines to package products. Observe and listen to equipment to detect possible malfunctions, such as leaks or plugging, and report malfunctions or undesirable tastes to supervisors. Clean materials, supplies, or work areas, using cleaning solutions and hand tools. Transport products and ingredients to production and material handling areas. Observe machine operations to ensure quality and consistency of products to standards. Adjust machine components and machine tension and pressure according to size or processing angle of product. Tend or operate machine that process dough. Regulate machine flow, speed, or temperature. Stop or reset machines when malfunctions occur, clear machine jams, and report malfunctions to a supervisor. Lift raw materials and products manually. Stock and replenish ingredients, such as corn starch into the line dispensors. Collect and examine product samples during production to test them for quality, color, content, texture and consistency. Observe gauges, dials, and product characteristics, and adjust controls to maintain appropriate texture and temperature of the dough. Move tables of dough from processing areas to packaging areas. Examine, measure, and weigh dough or products to verify conformance to specifications, using measuring devices such as scales. Set up, operate, or tend machines that cut or slice materials. Remove defective or substandard materials from machines, and readjust machine components so that products meet standards. Press buttons or pull levers to start and operate cutting and slicing machines. Adjust machine controls to alter position, alignment, speed, or pressure. FOOD SAFETY AND QUALITY Adheres to all Food Safety/Quality SOP's Communicates any known or suspected Food Safety/ Quality issues to the Production Manager or Supervisor, Q.A. Department or Management. Attends Food Safety/Quality training sessions SKILLS AND ABILITIES REQUIRED Knowledge of raw materials, production processes, quality control, and other techniques for maximizing the effective manufacture and distribution of food products. Knowledge of arithmetic and reading and writing. Ability to monitor gauges, dials, or other indicators to make sure a machine is working properly. Ability to determine the kind of tools and equipment needed to do the job. SAFETY HAZARDS Moderate exposure to loud noises. Frequent lifting, up to 50 lbs. and occasional lifting, up to 80 pounds Job will be performed standing. PPE will be required. MISCELLANEOUS This does not list all the job duties of this position. Duties listed are subject to change based on business and/or management needs. Management reserves the right to revise this job description at any time. This is a non-exempt, full time position reporting to the Production Supervisor.

Individual Contributor in charge of performing, within his / her area of technological specification, tasks in the manufacturing process in accordance with the manufacturing documentation and the time allocated, using the resources available (including conventional and/or digital machine tools) and inspects his / her own work: Performs Manufacturing operations in accordance with the associated documentation and the time allocated, using the resources available Is responsible for complex work and rework at unit and component level Chooses and implements suitable methods, resources and procedures; Brings support to the operators; Initializes and manages continuous improvement actions in and around his/her area; Performs final inspection duties when requested in accordance with drawings, EOs and any other regulatory requirement pertaining to the product.

Job Posting Start Date 10-15-2025 Job Posting End Date Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a/an Low Voltage Switchgear Assembler in USA, Fontana Ca. Reporting to the Production Manager the Low Voltage Switchgear Assembler is responsible for assembling fabricated metal parts for switchgear cabinets according to specifications. What a typical day looks like: Review, analyze, and follow various blueprints, diagrams, drawing, procedures, and work instructions to complete assemblies for enclosure buildings Mechanical assembly of components for switchgear cabinets Uses various power tools and hand tools (ex. Drills, impacts, screwdrivers, grinders, etc.) to accomplish assigned tasks Conduct quality assurance checks to confirm that assembled products meet specifications and quality standards Identify any product defects; record and report them accordingly Monitor and maintain inventory of necessary supplies, tools, and parts in workstation Maintain a clean and safe work area Perform all other duties as assigned The experience we're looking to add to our team: High School Diploma or equivalent 0-2 years of related experience in assembly or manufacturing setting Prior experience operating powered equipment (forklift, reach truck, scissors lift, overhead crane, etc.) Strong attention to detail and ability to perform work accurately Knowledge of manufacturing, equipment maintenance, and safety management Reading comprehension skills with the ability to interpret and follow written directions, blueprints, wiring drawings, schematics, and engineering diagrams Basic math skills to meet technical specifications and measurements Basic understanding of tools (ex. Tape measure, impact drill, etc.) Demonstrated proficiency with the ability to safety operate powered equipment (forklift, reach truck, scissors lift, overhead crane, etc.) What the physical requirements are: Prolonged periods of standing, bending, kneeling, and performing repetitive tasks. Must be able to lift, push, pull up to 35 pounds at a time. Must have manual dexterity in order to assemble products or machines as directed. Must have excellent hand-eye coordination. Ability to differentiate between colored wires, tabs, and electronic components. Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor #LI-GB1 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to California)$17.98 USD - $24.27 USD HourlyJob CategoryOperations Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).

General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems. Under general supervision with detailed instruction for new work or a special assignment, this position is responsible for performing a wide variety of repetitive or standard electronic and /or mechanical assemblies and subassemblies. Determines and/or follows methods and sequence of operations in performing assembly tasks such as wiring, component installation, hand soldering and cable harnessing on assembly units. May monitor and verify quality in accordance with control procedures. This position is for the second shift. DUTIES AND RESPONSIBILITIES: Assembles components, assemblies or sub-assemblies. Makes setups and adjustments holding tolerances to specifications. May perform duties as required in assembly of electronic equipment such as cables, harnesses, chassis, and printed circuit boards, or may perform mechanical assembly of panels, LRU's, batteries, and servo motors. May disassemble, modify, rework, and reassemble assemblies or subassemblies. Responsible for observing all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company. Expected to work in a safe manner in accordance with established operating procedures and practices. Additional Functions: May assist in training lower level assemblers. Performs housekeeping and cleanup duties upon completion of assigned tasks. Other duties as assigned or required. We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply. Typical requires a high school diploma or equivalent and three or more years experience. Must be customer focused and possess: The ability to read and interpret engineering drawing and wire lists. Good understanding of the general aspects of the job with limited technical comprehension. Knowledge of computer operations and applications pertinent to the position. Familiarity with use of soldering and compression connection tools. Good visual perception and ability to distinguish between colors. The ability to work independently or in a team environment is essential as is the ability to work extended hours as required. Ability to obtain and maintain DoD Security Clearance is required.

The Optical Assembly Technician is responsible for the precise assembly, alignment, and testing of optical components and systems. This position requires a strong attention to detail, excellent manual dexterity, and the ability to work with microscopes and fine tools in a lab environment. The technician will follow technical drawings, and work instructions to ensure product quality and performance standards are met. Primary Duties & Responsibilities * Assemble optical components (lenses, mirrors, prisms, filters) into mechanical housings using specialized tools and adhesives. * Perform precision alignment of optical assemblies using alignment fixtures and laser alignment systems. * Inspect optical components for defects such as scratches, chips, and coating flaws using microscopes and interferometers. * Handle and clean optics using industry-standard procedures (e.g., use of IPA, lint-free wipes, static control tools). * Read and interpret engineering drawings, work orders, and process instructions. * Conduct performance tests on finished assemblies using optical testing equipment. * Record test results and maintain accurate production and quality documentation. * Collaborate with engineering and quality assurance teams to resolve issues and improve processes. * Maintain a clean and organized work area, following all contamination control protocols. * Follow safety and ESD (electrostatic discharge) guidelines at all times. Education & Experience * High school diploma or equivalent; technical certificate or associate degree in optics, electronics, or related field preferred * Minimum of 2 years of experience in optical or precision assembly, or relevant hands-on technical experience Skills * Proficiency using microscopes, tweezers, torque drivers, and other fine assembly tools * Strong hand-eye coordination and manual dexterity * Ability to follow detailed work instructions and technical drawings * Basic computer skills for data entry and documentation * Preferred Skills * Experience working in a cleanroom or controlled environment * Familiarity with ISO standards and quality systems * Knowledge of laser safety and optical coatings Working Conditions * Work is performed in a lab environment with strict contamination controls * * May require use of PPE such as gloves, cleanroom attire, and safety glasses Physical Requirements * Requires sitting or standing for extended periods and working with small parts. Safety Requirements All employees are required to follow the site EHS procedures and Coherent A&D EHS standards. Quality and Environmental Responsibilities Depending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System. Culture Commitment Ensure adherence to company's values (ICARE) in all aspects of your position at Coherent A&D: Integrity - Create an Environment of Trust Collaboration - Innovate Through the Sharing of Ideas Accountability - Own the Process and the Outcome Respect - Recognize the Value in Everyone Enthusiasm - Find a Sense of Purpose in Work Coherent A&D is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. This role involves access to technology, materials, software, or hardware subject to U.S. export control laws. Therefore, to be considered, candidates must be classified as a "U.S. Person" under applicable regulations or be eligible for authorization under a U.S. government export license. If you need assistance or an accommodation due to a disability, you may contact us at ******************************.

Tests and calibrates parts Uses hand tools and power tools Identifies units that do not meet product specifications Repair units that fail testing Qualifications Some experience in the field MUST have high school diploma OR equivalent (and able to provide a copy of diploma) Able to lift 10-15 pounds Able to pass background screening AND drug screening Additional Information Pay Rate: $8.00/hr Shift: Monday-Friday, 7AM-3:30PM 8+/- Month Contract

Under minimum supervision, optical and mechanical assembly performs moderate complexity, sometimes requiring fitting, alignment and adjustment of optical/mechanical components and sub-assemblies. Capable of working with very close tolerances. Primary Duties & Responsibilities * Optical-Mechanical Assembly * Clean and assemble various optical parts, opto-mechanical sub-assemblies, and large assemblies. * Use of hand tools requiring above average level of manual dexterity and knowledge of proper procedures. * Solder onto various parts as required by assembly instructions. * Direct handling and cleaning of delicate optical components. * Familiarity with weighing, mixing, and outgassing RTV's, epoxies, and adhesives. * Understanding and usage of different chemicals and solvents. Skills & Other Requirements * Mathematical Skills * Ability to calculate figures and perform simple addition, subtraction, multiplication and division of whole numbers, decimals and fractions. * Ability to use a scientific calculator and perform basic calculations. * Language Skills * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. * Ability to communicate in English and speak effectively before small groups of employees in the organization. * Reasoning Ability * Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. * Ability to deal with problems involving a few concrete variables in standardized situations. * Ability to anticipate problems and proactively identify potential problems. Primary Duties & Responsibilities * High School Diploma or (GED) * Work Experience - Minimum of 2 years of experience in similar assembly operation. High level of manual dexterity, knowledge of a wide variety of hand tools, and knowledge of soldering. Working Conditions Regularly required to: * Sit, use hands and fingers, and reach with hands and arms * Demonstrate a high level of manual dexterity and care when handling delicate parts Frequently required to: * Talk and hear * Stand, walk, stoop, kneel, crouch, or crawl Physical Requirements Must be able to lift and/or move: * Up to 10 pounds frequently * Up to 50 pounds occasionally, with or without assistance Vision requirements include: * Close vision, distance vision, depth perception, and ability to adjust focus * Ability to inspect parts using an eye loupe and read small graduations on a micrometer and depth gauge * Must be able to wear safety gear for extended periods of time Safety Requirements All employees are required to attend scheduled training, follow the site EHS procedures and Corporate EHS standards. This includes the use of proper protective equipment (PPE) as required by the job responsibilities. Managers will ensure that all safety and environmental procedures are followed consistently. They will ensure that risk assessments are performed, proper training, work instructions, required PPE is available, and will monitor compliance. Quality & Environmental Responsibilities Depending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System. Culture Commitment Ensure adherence to company's values (ICARE) in all aspects of your position at Coherent Corp.: Integrity - Create an Environment of Trust Collaboration - Innovate Through the Sharing of Ideas Accountability - Own the Process and the Outcome Respect - Recognize the Value in Everyone Enthusiasm - Find a Sense of Purpose in Work Coherent Corp. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. To conform to U.S. Government export regulations (ITAR), applicant must be a U.S. person, lawful permanent resident of the U.S., protected individual as defined by 8. U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State." If you need assistance or an accommodation due to a disability, you may contact us at ******************************.

Shift: 1ST 7:00 AM - 3:30 PM $16.50 PRODUCTION 2ND 3:00 PM - 11:30 PM $18.00 PRODUCTION 3RD 11:00 PM -7:30 AM $20.00 SANITATION Under direct supervision, the Production Associate is responsible for performing basic product handling tasks to convert raw materials into finished goods. This position involves working with raw meat products, including pork, beef, and chicken, in a cool warehouse environment where the smell of spices is common. Key Responsibilities: Handle and process raw materials through various stages of production Move, weigh, form, mix, and package products according to company standards Maintain cleanliness and organization of the work area Follow all food safety and sanitation procedures Assist in setup, operation, and cleaning of production equipment Work Environment & Requirements: Must wear required PPE including hair net, safety glasses, smock, helmet, and safety shoes Ability to work in cool or refrigerated environments Must be able to stand for long periods and perform repetitive motions Reliable attendance and teamwork are essential

Job Posting Start Date 12-04-2025 Job Posting End Date Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a/an Low Voltage Switchgear Assembler in USA, Fontana Ca. Reporting to the Production Manager, Low Voltage Switchgear Assembler is responsible for assembling fabricated metal parts for switchgear cabinets according to specifications. What a typical day looks like: Review, analyze, and follow various blueprints, diagrams, drawing, procedures, and work instructions to complete assemblies for enclosure buildings Mechanical assembly of components for switchgear cabinets Uses various power tools and hand tools (ex. Drills, impacts, screwdrivers, grinders, etc.) to accomplish assigned tasks Conduct quality assurance checks to confirm that assembled products meet specifications and quality standards Identify any product defects; record and report them accordingly Monitor and maintain inventory of necessary supplies, tools, and parts in work station Maintain a clean and safe work area Perform all other duties as assigned The experience we're looking to add to our team: High School Diploma or equivalent 0-2 years of related experience in assembly or manufacturing setting Prior experience operating powered equipment (forklift, reach truck, scissors lift, overhead crane, etc.) Strong attention to detail and ability to perform work accurately Knowledge of manufacturing, equipment maintenance, and safety management Reading comprehension skills with the ability to interpret and follow written directions, blueprints, wiring drawings, schematics, and engineering diagrams Basic math skills to meet technical specifications and measurements Basic understanding of tools (ex. Tape measure, impact drill, etc.) Demonstrated proficiency with the ability to safely operate powered equipment (forklift, reach truck, scissors lift, overhead crane, etc.) What the physical requirements are: Prolonged periods of standing, bending, kneeling, and performing repetitive tasks. Must be able to lift, push, pull up to 35 pounds at a time. Must have manual dexterity in order to assemble products or machines as directed. Must have excellent hand-eye coordination. Ability to differentiate between colored wires, tabs, and electronic components. Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to California)$17.98 USD - $24.27 USD HourlyJob CategoryOperations Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).

Temp To Full-Time Skillset Group is seeking a Wire Harness Assembler to work in the Irvine, CA area. This position will under shop supervision the Inspect and perform work in accordance with IPC-A610 and other quality standards as needed. This will be a 1st shift position and will be contract to hire. To apply email: *************************

The Optical Assembly Technician is responsible for the precise assembly, alignment, and testing of optical components and systems. This position requires a strong attention to detail, excellent manual dexterity, and the ability to work with microscopes and fine tools in a lab environment. The technician will follow technical drawings, and work instructions to ensure product quality and performance standards are met. Primary Duties & Responsibilities Assemble optical components (lenses, mirrors, prisms, filters) into mechanical housings using specialized tools and adhesives. Perform precision alignment of optical assemblies using alignment fixtures and laser alignment systems. Inspect optical components for defects such as scratches, chips, and coating flaws using microscopes and interferometers. Handle and clean optics using industry-standard procedures (e.g., use of IPA, lint-free wipes, static control tools). Read and interpret engineering drawings, work orders, and process instructions. Conduct performance tests on finished assemblies using optical testing equipment. Record test results and maintain accurate production and quality documentation. Collaborate with engineering and quality assurance teams to resolve issues and improve processes. Maintain a clean and organized work area, following all contamination control protocols. Follow safety and ESD (electrostatic discharge) guidelines at all times. Education & Experience High school diploma or equivalent; technical certificate or associate degree in optics, electronics, or related field preferred Minimum of 2 years of experience in optical or precision assembly, or relevant hands-on technical experience Skills Proficiency using microscopes, tweezers, torque drivers, and other fine assembly tools Strong hand-eye coordination and manual dexterity Ability to follow detailed work instructions and technical drawings Basic computer skills for data entry and documentation Preferred Skills Experience working in a cleanroom or controlled environment Familiarity with ISO standards and quality systems Knowledge of laser safety and optical coatings Working Conditions Work is performed in a lab environment with strict contamination controls May require use of PPE such as gloves, cleanroom attire, and safety glasses Physical Requirements Requires sitting or standing for extended periods and working with small parts. Safety Requirements All employees are required to follow the site EHS procedures and Coherent A&D EHS standards. Quality and Environmental Responsibilities Depending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System. Culture Commitment Ensure adherence to company's values (ICARE) in all aspects of your position at Coherent A&D: Integrity - Create an Environment of Trust Collaboration - Innovate Through the Sharing of Ideas Accountability - Own the Process and the Outcome Respect - Recognize the Value in Everyone Enthusiasm - Find a Sense of Purpose in Work Coherent A&D is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. This role involves access to technology, materials, software, or hardware subject to U.S. export control laws. Therefore, to be considered, candidates must be classified as a “U.S. Person” under applicable regulations or be eligible for authorization under a U.S. government export license. If you need assistance or an accommodation due to a disability, you may contact us at ****************************** .

Job Posting Start Date 12-04-2025 Job Posting End Date Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a/an Low Voltage Switchgear Assembler in USA, Fontana Ca. Reporting to the Production Manager, Low Voltage Switchgear Assembler is responsible for assembling fabricated metal parts for switchgear cabinets according to specifications. What a typical day looks like: Review, analyze, and follow various blueprints, diagrams, drawing, procedures, and work instructions to complete assemblies for enclosure buildings Mechanical assembly of components for switchgear cabinets Uses various power tools and hand tools (ex. Drills, impacts, screwdrivers, grinders, etc.) to accomplish assigned tasks Conduct quality assurance checks to confirm that assembled products meet specifications and quality standards Identify any product defects; record and report them accordingly Monitor and maintain inventory of necessary supplies, tools, and parts in workstation Maintain a clean and safe work area Perform all other duties as assigned The experience we're looking to add to our team: High School Diploma or equivalent 0-2 years of related experience in assembly or manufacturing setting Prior experience operating powered equipment (forklift, reach truck, scissors lift, overhead crane, etc.) Strong attention to detail and ability to perform work accurately Knowledge of manufacturing, equipment maintenance, and safety management Reading comprehension skills with the ability to interpret and follow written directions, blueprints, wiring drawings, schematics, and engineering diagrams Basic math skills to meet technical specifications and measurements Basic understanding of tools (ex. Tape measure, impact drill, etc.) Demonstrated proficiency with the ability to safely operate powered equipment (forklift, reach truck, scissors lift, overhead crane, etc.) What the physical requirements are: Prolonged periods of standing, bending, kneeling, and performing repetitive tasks. Must be able to lift, push, pull up to 35 pounds at a time. Must have manual dexterity in order to assemble products or machines as directed. Must have excellent hand-eye coordination. Ability to differentiate between colored wires, tabs, and electronic components. Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to California)$17.98 USD - $24.27 USD HourlyJob CategoryOperations Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).