Assembly line worker jobs in Wichita, KS

Job Description Shop Assembly Assemble finished product using sub-assemblies, parts, and fasteners. Loads outbound shipments and unloads incoming deliveries. Shop Assembly Essential Duties and Responsibilities: Check specifications to determine required assembly, exterior finish on product, and any special directions Checks stock for adequate supplies of sub-assemblies, parts, and fasteners for the particular run Assembles components by examining connections for correct fit, fastening parts, and sub-assemblies, per customer order. Preps fully assembled equipment accurately in preparation for prompt shipment Loads outgoing shipments and unloads incoming deliveries. Maintains clean and safe working environment Help set up and tear down trade shows Makes short deliveries Performs other duties as requested, directed or assigned. Shop Assembly Experience and Education: High School Diploma (or GED or High School Equivalence Certificate) Experience using small hand and power tools 1+ year in shop or manufacturing environment Shop Assembly Essential Skills: Dependability Mechanical aptitude Experience operating a forklift

Job Summary: Perform assembly functions of assigned station for assigned line of production in a safe, effective and efficient manner in order to deliver a quality product to our customer. Job Details: Assemble assigned product as instructed by Assembly Trainer. Insure a quality product by using tools in proper manner. Work as team member for the assigned product line by effectively communicating production needs and helping teammates to reach daily production goals. Keep work area clean and comply with 6S process for assigned line. Be flexible in job assignments and learn new skills so each employee can move to areas as assigned to complete assigned tasks. Participate in Lean manufacturing training and Kaizen events with a focus on eliminating waste in all production activities. Assemble product that meets the quality standards each and every time. This Job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities of the employee. The employee may be assigned other responsibilities as required of the position. Job Qualifications: Preferred 3+ years' experience in a similar production environment. Technical training at an accredited school. Job Requirements: Physical: Ability to lift 50lbs minimum for all production lines which increases to 75lbs for Vane Pump. Standing on concrete factory floor for 10+ hours per day. Must be able to wear steel toe safety shoes, safety glasses and other PPE equipment as required for work function. Ability to safely reach, stretch, bend and lift parts and product from a standing position. Overhead lifting of various parts. Ability to work with various hand tools that require hand strength (10lbs) and flexibility including but not limited to hammers, screw drivers, crimping and torque wrenches. Tools / Equipment: Powered and hand tools to perform the function of product assembly. Some hand tools may have vibration. Working Conditions: Temperature-controlled factory environment. Hours: Mon-Thur 6:00am-4:30pm OT as required

Job Details Wichita, KS Full Time $20.00 - $30.00 Hourly Day ManufacturingDescription Summary: Assembles structural sections of aircraft using parts, subassemblies, and components and/or installs functional units, parts or equipment. Essential Duties and Responsibilities: Assembles structural sections of aircraft using fabricated parts, subassemblies, and components by safely using hand tools and power tools in accordance with blueprints and specifications. Drill holes into structure and subassemblies and attaches brackets, hinges, or clips. Cuts, trims, and files parts to the proper fit. Locates and identifies reference points and holes for installation of parts using jigs, templates, and measuring instruments. Ensures parts are aligned to acceptable tolerances. Inspects and tests installed units, parts, and equipment for fit, form, and function in compliance with standards using appropriate measuring instruments and test equipment. Tends machines, such as arbor presses or riveting machine, to perform force fitting or fastening operations on assembly line. Nonessential Duties and Responsibilities: Provides guidance to bench assemblers when needed. Provides assistance to other production areas as needed. Maintains clean work area, tools, and equipment. Performs other duties as assigned. Qualifications Requirements: To perform this job successfully, an individual must be able to perform each essential function and assigned task satisfactorily. The requirements listed below are representative of the knowledge, skills, competencies, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High school diploma or general education degree (GED) required. Ability to read blueprints required. Minimum 1 year previous related experience required. Ability to apply basic math, including adding, subtracting, multiplying, and dividing in all units of measure, using whole numbers, common fractions, and decimals. Ability to communicate verbally in one-on-one situations with management and co-workers; listen to others without interrupting and get clarification when needed. Ability to safely and properly use gauges, calipers, and other tools and equipment. Ability to identify proper materials and supplies according to specifications. Strong attention to detail and focus on quality and accuracy. Exhibits dependability, including following instructions; responding to supervisor's direction; and taking responsibility for own actions. Ability to take initiative, including asking for and offering help when needed; performs work independently without being prompted Ability to prioritize and plan work activities; use time efficiently; and work within deadlines.

The compensation range provided for this role is an estimate based on available market data. The actual amount may vary considering the candidate's knowledge, skills, abilities, and geographic location. If you have questions, please discuss the flexibility and details of our compensation philosophy with your recruiter. Benefits Paid Time Off (PTO) Paid Holidays + 1 Floating Holiday of YOUR Choice Medical, Dental, and Vision Insurance Options 401(k) Retirement Plans + Employer Match 100% Company-paid Basic Life Insurance, Short and Long-Term Disability Insurance, Teladoc Services, and Employee Assistance Program (EAP) HSA, FSA and Pet Insurance Options Safety Boot and Prescription Safety Glasses Reimbursement Program Gym Membership Reimbursement And more! What You Can Expect Working in the Shop Technician I Position The Shop Tech I works under the direction of the Production Supervisor and is responsible for the interior build-out of the construction of storm shelters and other industrial buildings. As a Shop Tech I, you will be responsible for reading a tape measure, running a hand sander, a scraper, and inspecting your work to make sure the metal has been deburred correctly. You will also be responsible for pressure washing and or sand blasting units. Our team of plant employees ensures that safety and quality are top of mind in the production of our products. As a Shop Tech I, you are integral in supporting RedGuard Diversified Structure's goal of delivering customers a quality product on time. Responsibilities Reads a tape measure, runs a hand sander, uses a scraper, and inspects work to make sure the metal has been deburred correctly. Produces work in accordance with industry standards. Cross-trains in various construction skill sets and uses skills in multiple stages of the manufacturing process. Examines products or work to verify conformance to specifications and ensures the quality of products or work. Inspects machines and equipment to ensure specific operational performance and optimum utilization. Operates a forklift safely and efficiently to move materials, parts, and equipment within the shop or warehouse. Follows established safety and security rules and regulations and maintains a safe and clean work area and environment. Minimum Qualifications Prior job experience preferred. No prior forklift experience required. Will receive on-the-job training and may be eligible for forklift certification as part of development into higher-level technician roles. Ability to read a tape measure and practice basic arithmetic. Ability to use hand tools and power tools. Excellent organizational skills and attention to detail. Ability to follow instructions and provide consistent work. Works well as part of a team. Basic computer skills. WORK ENVIRONMENT The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Heavy work. Exerting up to 100 pounds of force occasionally, and/or up to 50 pounds of force frequently, and/or up to 20 pounds of force constantly to move objects. • Prolonged periods standing, climbing, bending, and kneeling. • Must have manual dexterity, a good sense of balance, and excellent hand-eye coordination. • The worker is frequently required to operate machinery and/or power tools. Must be able to safely work with sharp tools or power equipment. • The worker is subject to environmental conditions. Protection from weather conditions but not necessarily from temperature changes. • The worker is subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. • Must have full use of both hands and arms to perform tasks requiring coordination, strength, and fine motor skills. This includes handling tools or equipment, lifting or carrying materials, operating machinery, and performing repetitive or precise movements with both hands simultaneously. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Except where prohibited by state law, all offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify. This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR). Non-U.S. persons selected must meet eligibility requirements for access to export-restricted information. The ITAR/EAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please provide a brief description of your reasonable accommodation to accommodations@lange.us.com Department/Division: Plant Reports to: Fabrication and Production Manager Location: Wichita, KS Shift: 1st Overtime: As Required Position Type/Hours: Full-time | M-T | 7:00a - 5:45p Travel Requirement: Less than 5% FLSA Status: Non-Exempt About The Company Purchased by RedGuard in 2021, RedGuard Diversified Structures is a trusted provider of structures for severe weather and asset protection. Our two brands, Survive-A-Storm Shelters and Matador Steel Buildings, offer comprehensive safety solutions for families and businesses. Our tornado shelters are debris and impact-tested through the Texas Tech Wind Institute to ensure safety, and they bear the seal of the National Storm Shelter Association. Matador Steel Buildings offer rugged steel pole barn structures to protect your assets. We prioritize safety and quality by using high-quality steel manufactured in the USA. With a focus on quality and attention to detail, RedGuard Diversified Structures is the trusted choice for protective structures. For more information, visit ******************************************

When you join the Verus Aerospace team, you are more than a number - you are a valued part of our company family. Superior craftsmanship, employee pride and a shared commitment to continuous improvement are the foundation of our success. We have a strong reputation for professionalism and quality in the aerospace industry. Our company is committed to excellence and we recognize that the right people, offering their ideas and expertise, will enable us to continue our success. We seek team members who are passionate, adaptable, driven to achieve quality results, focused on continuous improvement, self-motivated and problem solvers. Position Summary: On a production basis, performs precision mechanical assembly work, which is typically of high complexity and/or requires fitting, alignment, and the adjustment of components, units, and assemblies to very close tolerances. Assemblers integrated next-level assembly work on machined/fabricated aerospace parts at a floor station. Assembles fabricated parts at a floor station using and or performing: Riveting, Cold Working, Nut Plates, Bearings, Bushings, Cold Bonding, Fabricating, and installing Shims, Sealing, Bucking/Squeezing Rivets and Grounding Blocks for integrated next-level assemblies. Assemblers tests and calibrates parts and mechanisms to meet tolerances and product specifications. Assemblers also ensures conformance to established procedures and quality level of Cadence site location Engineering and Quality Policy and conformance to Customer Engineering and Specifications and safe work habits. Essential Duties and Responsibilities: Accomplishes various production assembly functions that are somewhat complicated in nature. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Set up and operate a variety of assembly tools. Use precision measuring tools or equipment. Uses hand tools and power tools to assemble units according to product specifications using jigs and templates when required. Positions parts in specified relationship to each other under extremely close tolerance conditions. Fastens parts together using an Orbital Riveting machine. Loads and unloads previously setup machines such as arbor presses, drill presses and milling machines. Identifies units that fail tests or tolerance levels and repairs as necessary. Trouble-shoots and reworks production items that do not meet specifications. Relies on instructions and pre-established guidelines to perform the functions of the job. Familiar with a variety of the field's concepts, practices, and procedures. Relies on extensive experience and judgment to plan and accomplish goals. Performs a variety of complicated tasks. Some degree of creativity and latitude is expected. Works under immediate supervision. Position Requirements: May be required to meet certain certifications in field. Requires at least 7 years of experience in the field or in a related area of precision mechanical assembly experience. Working knowledge of shop math and geometry. The ability to read and interpret complex drawings and documents for machined parts and assemblies highly desired. Preferred experience in Riveting, Nut Plates, Bearings, Bushings, Cold Bonding, Fabricating and installing Shims, Sealing, Bucking/Squeezing Rivets and including but not limited to Grounding Blocks for integrated next-level assemblies. Preferred knowledgeable in the use of various power-hand tools, drills, jigs, templates, boring and bucking equipment. Good communication skills with the ability to work with others with a positive attitude. Provide training to less experienced assemblers or as directed by management. Complies with safety training and policies. Provide accurate information to supervisors, and co-workers. Owner of safety for the area. All operators/visitors to area are following safety policy, wearing proper PPE, etc. General Physical Requirements: Standard physical requirements to include the ability to sit and stand for multiple hours at a time; Able to sit and stand for multiple hours at a time; Reaching walking; Pulling, pushing, lifting 50 lbs. or less; Atmospheric conditions, oils/coolants. Other assignments as requested by management. Physical and Environmental Demands: Manufacturing environment may be exposed to noise levels, dust, grime and heat. Must wear appropriate personal protective equipment. Equal Employment Opportunity Verus Aerospace is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, gender, religion, disability, sexual orientation, marital status, veteran status, gender identity or expression, or any other basis protected by local, state or federal law. This policy applies with regard to all aspects of one's employment, including hiring, transfer, promotion, compensation, eligibility for benefits and termination. A notice describing Federal equal employment law is available here. Reasonable Accommodations Verus Aerospace is committed to offering reasonable accommodations to qualified job applicants with disabilities. If you need assistance or an accommodation due to a disability, please click here to contact us and let us know the nature of your request and contact information. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this e-mail address. Transparency In Coverage (TIC) information This is a link that will take you to Anthem's website for access to Verus' Machine-Readable Files per the Consolidated Appropriations Act, 2021 Transparency in Coverage requirement to provide Machine-Readable Files on the health plan (effective July 1, 2022). ****************************************************** ITAR Requirements To conform to U.S. Government export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by ITAR (22 CFR §120.15). E-Verify This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment. Employers can only use E-Verify once you have accepted a job offer and completed the Form I-9. E-Verify Works for Everyone For more information on E-Verify, or if you believe that your employer has violated its E-Verify responsibilities, please contact DHS. ************ dhs.gov/e-verify I certify that I have made true, correct, and complete answers and statements on my employment application, any supplements to it and in any interview in the knowledge that they will be relied upon in considering my application for employment. I understand that any false or misleading information or omission may disqualify me from further consideration for employment and may lead to my dismissal from employment or revocation of an offer of employment, if discovered at a later date. I also understand that if I am hired, I will be required to provide proof of identity and legal authorization to work in the United States and that federal immigration laws require the completion of an I-9 Form in this regard. This Company does not tolerate unlawful discrimination in its employment practices. No question on this application is used for the purpose of limiting or excluding an applicant from consideration for employment on the basis of his or her race, color, religion, national origin, genetic information, gender, gender identification, gender expression, marital status or civil partnership/union status, sexual orientation, cancer related condition, medical condition, citizenship, age, physical or mental disability (actual or perceived), pregnancy disability, or family leave status, pregnancy, breastfeeding needs, reproductive health decision-making, organ or bone marrow donor status, or military or veteran's status, or any other protected status under applicable federal, state, or local law. This company likewise does not tolerate harassment based on sex, race, color, religion, national origin, genetic information, citizenship, age, disability, or any other protected status. Harassment of our employees is strictly prohibited, whether it is committed by a manager, coworker, subordinate, or non-employee (such as a vendor or customer). The Company takes all complaints of harassment seriously and all complaints will be investigated promptly and thoroughly. I hereby understand and acknowledge that any employment relationship with this Company is of an “at will” nature, which means that my employment may be terminated by me or the company at any time for any reason or no reason, and with or without notice. It is further understood that this “at will” employment relationship cannot be changed except in writing by an authorized executive of this Company. If hired, I agree to abide by all of the Company's rules, policies, and procedures. I understand that the Company and all plan administrators shall have the maximum discretion permitted by law to administer, interpret, modify, discontinue, enhance, or otherwise change all policies, procedures, rules, benefits, or other terms or conditions of employment. I understand that in addition to this application, the employment process may, for certain positions, include any or all of the following procedures: testing - aptitude, personality and/or skill, multiple interviews, post-offer thorough background checks and drug screening test. Immigration Compliance Plan The Company policies include a commitment to non-discrimination based on race, national origin and immigration status. Pursuant to the Immigration and Nationality Act (INA), which protects work authorized individuals from employment discrimination on the basis of citizenship status or national origin, employment decisions will not be made on the basis of a person's national origin, race or immigration status except to the extent necessary to comply with the International Traffic in Arms Regulations (ITAR). In those situations, the Company will need to obtain information necessary to comply with the requirements of the International Traffic in Arms Regulations (ITAR). This will include collection of documentation to establish one of three categories of citizenship/ immigration status: (1) U.S. Citizenship; (2) Permanent Residency (Green Card) and (3) Asylum or Refugee Status (formally recognized or assigned such status by the U.S. Immigration and Customs Enforcement). If an applicant or employee does not meet the category applicable to their anticipated work for the Company, the Company cannot hire such applicant. In order to ensure ITAR compliance, all applicants and employees of the Company will have their immigration status checked through a system called “E-Verify.” If the findings on the E-Verify search are not accurate, please contact Human Resources and obtain copies of all documents related to your work status. Employees who are not authorized to work in the United States cannot be employed at the Company.

WHO WE ARE… Founded in 1964, Mid-Continent Instruments and Avionics provides superior instruments, avionics and power solutions to the global aerospace community. We operate one of the largest maintenance, overhaul and exchange programs in the world, and deliver safe and certified products, using innovative technologies and sophisticated clean sheet designs. THE POSITION… As an Assembler , you will provide assembly from the individual component level to a high-quality finished product. You'll conduct final testing on a variety of aircraft instruments and avionics for the best customers from all over the world - from general, business, and commercial aviation. We have high manufacturing standards to achieve perfect function, providing the customer with innovative, reliable, quality products. To be successful in this role, you'll need great aptitude for fine, detailed mechanical work and to really understand the value of accuracy. You'll be an important part of the process that keeps our customers flying! THIS POSITION MAY BE FOR YOU IF… You have a high school diploma or GED. You have a minimum two-year electronics degree or equivalent education, training, and work experience. You have a minimum one year of experience in assembly with several types of avionic equipment such as pressure gauges, batteries, and inverters. You are adept at utilizing hand tools and electronic testing equipment. You have a demonstrated understanding of advanced analog and digital electronics. You have strong attention to detail. You are organized, focused and results oriented. You are a problem-solver with critical thinking and prioritizing skills. You have good verbal, written and interpersonal communication skills. WE WOULD REALLY LIKE IT IF… (but it's not a deal breaker) You are proficient with PCB soldering, but if not, we'll provide training! THE PHYSICAL AND WORKING ENVIRONMENT REQUIRES… Performing repetitive tasks. Good eye-hand coordination. Occasional lift and carry independently up to 50 lbs. Constant handle, feel and manipulation of small objects. Use of small tools such as screwdrivers, tweezers, and wire cutters. WHAT YOU CAN EXPECT FROM ONE DAY TO THE NEXT… Perform assembly of highly technical electronic components, parts, equipment, and systems to include de-soldering, troubleshooting, and component replacement Conduct final testing on a variety of electronic instruments Complete documentation such as shop, and manufacturing order records and submit required reports Read and interpret assembly drawings and schematics, procedures, and technical manuals WE ARE ONE OF THE BEST PLACES TO WORK… We provide competitive pay and a comprehensive benefits package. We promote an environment where you can excel in your career while maintaining a healthy work-life balance. Our facility is climate controlled, clean, organized, and safe. We operate in a professional, light manufacturing environment. We foster a friendly and inclusive workplace in which all employees feel valued, respected, and accepted. We are all on the same team. We communicate well with one another. We believe anything worth doing is worth doing right - every time. We have a fairly flat organizational structure which allows for improved collaboration, easier decision-making, and effective communication between leadership and employees. We have frequent events to keep work interesting. Our food drive is super impressive, we enjoy an annual food truck fest appreciation day, monthly fruit/donut day, employee luncheons throughout the year, wellness challenges with incentives and frequent ticket raffles for local sporting and cultural events. We have a small company feel - even though we're doing big things! This job description is intended to describe the general nature and level of work performed and is not intended to be an exhaustive list of all responsibilities, duties and skills required.

Benefits: Bonus based on performance Health insurance Opportunity for advancement PC Assembly Technician - Build High-Performance Gaming Rigs with CLX! Are you a tech-savvy gamer who loves building and customizing PCs? Do you get excited about high-performance hardware, cable management, and overclocking? If so, CLX wants you on our team! At CLX, we create top-tier, custom-built gaming PCs that push performance to the next level. As an industry leader in high-end system integration, we specialize in cutting-edge hardware, custom open-loop cooling, and bold, one-of-a-kind designs. Our mission is to deliver the ultimate gaming experience-and we need passionate builders like you to make it happen! What You'll Do: Assemble and configure high-performance gaming PCs using the latest components. Master cable management and airflow optimization for top-tier performance. Install and test custom open-loop cooling systems. Apply custom paintwork and prints for a truly unique aesthetic. Follow assembly guidelines to ensure quality and performance standards are met. Work efficiently to meet production goals without compromising attention to detail. Maintain a clean, organized, and safe workspace. What We're Looking For: Passion for gaming PCs and hardware-if you love building, tweaking, and optimizing, this is the job for you! Attention to detail-cable management and precision matter. Ability to stand, walk, push, pull, squat, bend, and reach during shifts. Comfortable using carts, dollies, and hand trucks to move items as needed. Reliable and dependable-we need team players who show up and get the job done. Strong teamwork skills-we build together. Ability to follow basic directions accurately. Reliable transportation to and from work. Time management skills-meeting targets is key! Able to work a full-time schedule and maintain focus in a fast-paced setting. Why Join CLX? Competitive Pay - Earn based on experience and performance. Uncapped Performance Bonuses - The better you perform, the more you earn! Flexible Shifts - Work when it fits your schedule. Full Benefits Package - Health, dental, 401(k), PTO, and more! Paid Training & Career Growth - We promote from within. Fun & Fast-Paced Work Environment - Be part of a team that loves gaming as much as you do! If you're ready to turn your passion for building gaming PCs into a rewarding career, apply today and help us craft the most epic gaming computers in the Cybertron! Compensation: $12.00 - $14.00 per hour CLX is a custom PC integrator catering to gamers and content creators. CLX is a division of Cybertron International, one of the largest system integrators in the US since 1997. CLX believes in quality, attention to detail, and giving gamers the ability to choose exactly what they desire. Recognized for its award-winning custom designs and paint work, CLX offers a range of carefully curated systems or a completely customized experience by allowing gamers the ability to configure their own. CLX systems can be found on Amazon, Best Buy, Walmart, Newegg and other retail partners. Fast paced and exciting environment, we work with the latest and greatest tech on the market! If you are motivated to learn new skills and increase your knowledge and experience we have a spot for you in our growing company!

Job Description All applicants must be US Citizens due to ITAR regulations. Job Title: Assembly Technician Department: Production (all lines) Reports to: Assembly Lead FLSA (Exempt / Non Exempt): Non Exempt Job Summary: As an Assembly Technician, you will be trained to build valves for numerous aerospace applications. The training will include the usage of many tools, gauges, and various pneumatic and electronic equipment used in the process of building and testing valves. Additionally, you will learn electrical soldering, how to read blue prints, common terminology, and standard practices in aerospace manufacturing. Job Responsibilities: • Assemble and test products as directed by work instructions. • Work as an individual and as a team member. • Keep work area clean and orderly. • Maintain a work environment that is professional, inclusive, efficient, and enjoyable. Supervisory Responsibilities: None Job Qualifications: Required • A strong ability to understand mechanical assemblies and comfortable learning and using various equipment. • An acute attention to detail is extremely important given the complexity of the product. • Good communication skills. • A positive attitude and ability to work cohesively with subordinates, peers, and superiors. Preferred • 2+ years of experience in a similar production environment. • Prior exposure to aerospace requirements and practices. • Background in testing with electronics. Physical Demands: • The tasks require the employee to stand; walk; use hands and fingers; and reach with hands and arms. • The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Tools / Equipment: • Assembly Technicians will use a variety of hand tools and power tools, along with electronic and pneumatic equipment and gauges. Working Conditions: • Temperature controlled factory environment.

Responsible for the assemblies of sheet metal and machined aluminum parts per Customers engineering drawings and specifications. RESPONSIBILITIES: Perform visual inspection of manufactured parts and traveler Verify parts, rivets and assembly procedures to traveler Confirm material specifications as given on traveler Assemble to IAW Engineering Drawings and special notes Able to use equipment designed to perform assemblies Verify accuracy of job and workmanship when performing jobs Adhering to quality assurance procedures and processes Accomplish organization goals by accepting ownership for all new and different requests Explore opportunities to add value to job accomplishments Meet production goals in terms of cycle time, quantity, and quality Miscellaneous tasks as assigned Qualifications EXPERIENCE: Minimum two years experience in an aerospace setting Ability to read blueprints and decipher drawings REQUIREMENTS: Familiar with safety standards and PPE utilized in a manufacturing setting Must have reliable transportation and be able to work overtime when needed Ability to read, write and understand English Proficient in blue print reading Knowledge of hand tools and precision measuring tools, such as calipers, with the ability to calibrate new tools Ability to stay on task with minimal supervision Strong communication and problem solving skills Detail oriented Capable of mixing sealers and weigh sealers on scales

Job Description Fabrication Production worker will work directly on a production line to ensure a product is de-boned, trimmed or cut to customer specifications. They will be responsible for being an example to other team members using a continuous improvement mentality and will work to perpetuate a “Creekstone Proud” culture through attitude and actions. ESSENTIAL FUNCTIONS: • Position requires individual to cut, trim, fabricate and package beef products in a production line setting. • Processing will involve use of a knife and hook to bone out or trim large pieces of product or may involve the use of powered equipment such as saws or wizard knives. • Work environment is cold and damp with temperatures of less than 45 degrees. • It is a fast paced and physically demanding position • All other duties as assigned KNOWLEDGE, SKILLS, AND ABILITIES: • Stand entire shift on concrete and/or elevated platform • Lifting, pulling, pushing, or carry up to 60 lbs. for knife positions and 100 lbs. for non-knife positions on occasion • Tolerate repetitive motion using your hands/wrist/arm/torso and legs • Will be required to use the proper equipment to trim, debone, skin meat product. • Willing to wear necessary personal protective equipment such has hardhat, steel-toed-boots, gloves, etc. • Must be willing to work with sharp knives, some power equipment and / or saws • Ability to work in cold/damp indoor working conditions • Must be able to work at a steady pace PHYSICAL REQUIREMENTS: • Climbing occasionally • Stooping occasionally • Crouching occasionally • Standing for 8 or more hours per day • Walking frequently • Pushing frequently • Pulling frequently • Gasping frequently • Repetitive motions frequently • Lifting: 0 - 100# Creekstone Farms Premium Beef LLC is an Equal Opportunity Employer

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers . If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Unless specifically stated otherwise, this role is "On-Site" at the location detailed in the job post. Job Description Summary Our facility in Maize, KS is growing and we are looking for talented individuals to join our NIGHT SHIFT team! At our facility, we manufacture Coleman Propane Camping cylinders. The assembler position performs assembly operations to produce LPG cylinders and monitors cylinders to required specifications. Responsibilities Gets job instructions Handles materials to and from workstation Gets work station and equipment ready for production Makes minor changes and adjustments to machinery and equipment such as changing tools and, notifies leads and supervision when process out of standard operating procedure Loads and unloads conveyor Maintains records such as oven temperature, cooling temperature and other records as required Verifies tools and machinery are appropriate for operation Counts, packages and/or crates and identifies parts and products on assembly lines May work in groups or individually as assigned Maintains quality standards Reports all material shortages Maintain work area using 6S Principles Other duties as assigned Additional Qualifications/Responsibilities Desired Experience To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High school diploma or general education degree (GED); or a minimum of two months related experience and/or training; or equivalent combination of education and experience. Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Ability to add, subtract, multiply and divide using whole numbers, common fractions and decimals. Ability to apply common sense understanding to carry out detailed written or oral instructions. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands and fingers to handle or feel; reach with hands and arms and talk or hear. The employee is frequently required to walk. The employee must regularly lift and /or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Schedule: Day Night 6a - 6p - Night shift 6p-6a. 2 days on, 2 days off, 3 days on, 2 days off, 2 days on, 3 days off. Starts on a Monday, getting a 3 days weekend off every other week. (one week is 40 hours plus 8 hours of OT, the next week is 36 hours. Paid biweekly which averages 42 hours a week) - basically the days you work one week, you are off the following week and they rotate.

Job Details Mill Creek Truss LLC - HALSTEAD, KS $16.00 - $20.00 Hourly 1st Shift Skilled Labor - TradesDescription Start a life-long career with a fast-paced, family oriented company! Mill Creek Truss, a division of Mill Creek Lumber & Supply Company is looking for Truss Assemblers. Help us build America! Mill Creek Lumber & Supply Company has been in business since 1934 and is a strong, growing regional industry leader. We offer: A great place to work with a friendly team of employees Competitive pay with the opportunity to work overtime A benefits package that includes company medical contribution towards the Health Savings Account Dental & Vision insurance Life insurance as well as short- & long-term disability All full-time employees are eligible the first of month following 30 days of employment A 401(k) Retirement Savings Plan with match Job Location: 3363 S Halstead Rd, Halstead, KS 67056 A Truss Assembler is a critical component of the process of manufacturing our truss products. Place connector plate at each truss joint by hammering in place Fit parts together in accordance with the prescribed manner and in accordance with quality standards Use a mechanical roller to embed the connector plate to the truss Send the truss through the finished press Move each assembled truss to the yard for delivery preparation Stack completed products in accordance with established procedures, and if required, may cover label and band components to finish the product Operate hand tools, saws, presses, and pneumatic staple and nail guns as required to complete the assembly process Inspect materials and finished products to ensure compliance with standards Work with various building materials, including wood and metal Assist in work area setup and cleanup Other duties as assigned Qualifications Qualifications: Understands proper saw standards Self-directed, requiring little supervision Reliable adherence to attendance with set schedule Communicate both written and verbally Basic Math Able to accurately read a tape measure Able to follow directions Must be 18 years of age or older Must be able to successfully pass pre-employment screens to company satisfaction Physical Demands: The physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to type, handle or feel objects, tools or controls; reach with hands and arms; balance, stoop, kneel, crouch or crawl; talk, hear, taste and/or smell; the employee must occasionally lift products weighing up to approximately 50-100 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Indoor environment with varying degrees of noise levels and seasonal temperature extremes Employee could occasionally be exposed to weather conditions prevalent at the time. The noise level in the work environment is usually moderate. Could occasionally visit job sites; walking on uneven and rugged terrain on multi-phase construction sites

**A Snapshot of Your Day** Join Siemens Energy's manufacturing team and play a pivotal role in shaping the future of energy. As a Floor Assembly Technician and Crane Operator, you will be responsible for the safe and efficient assembly of critical energy components, utilizing overhead cranes to move large, heavy equipment and materials throughout the production floor. Your day will involve a dynamic mix of hands-on mechanical assembly and skilled crane operation, ensuring quality and safety are maintained to the highest standards. Relocation will not be offered for this role. **How You'll Make an Impact** + Performs a sequence of predefined, specializedand different mechanic assembly operations, which includes specializedtesting and problem analysis, in cooperation with a team of differentlyqualified assembly technicians. + Contributes to planning and effective resourceallocation in the production group (mechanic assembly). + Plans own work steps in cooperation with otherteam members. + Performs a set of qualified assemblyoperations, which may include all electronic, electro-mechanic andmechanic assemblies or sub-assemblies. + Constantly monitors availability of parts,tools and machines needed to complete product in the relevant subsequentsteps of the overall assembly process. + Uses specific equipment and/or a range ofspecialized tools and machines and maintains functionality. + Contributes to plan, execute and analyze theresults of test routines and procedures, often in a complex testenvironment + Assists in resolving routine manufacturingrelated problems affecting daily operations. + Follow establishedsafety procedures. + Able to achieve the crane operator and riggercertification and complete complex lifts safely. **WhatYou Bring** + High school diploma or equivalent. + Minimum 1 year of experience as mechanicalassembler preferred. + Ability to use handtools, power tools and lifting equipment. + Ability to meetproduction standards. + Stoop, kneel, crouch,twist. + Will need to pass basicmath skills test to demonstrate ability to obtain certification. Qualified applicants must be legally authorized for employment in the United States. Qualified applicants will not require employer sponsored work authorization now or in the future for employment in the United States. **Who is Siemens Gamesa?** Siemens Gamesa is part of Siemens Energy, a global leader in energy technology with a rich legacy of innovation spanning over 150 years. Together, we are committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. As a leading player in the wind industry and manufacturer of wind turbines, we are passionate about driving the energy transition and providing innovative solutions that meet the growing energy demand of the global community. At Siemens Gamesa, we are constantly seeking individuals to join our team and support our focus on energy transformation. **Rewards/Benefits** + Career growthand development opportunities + Supportive workculture + Company paid Health and wellness benefits + Paid Time Offand paid holidays + 401K savingsplan with company match + Family buildingbenefits Equal Employment Opportunity Statement Siemens Energy is an Equal Opportunity and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law.

Installs electrical wiring and assembles components in control cabinets and panel boards according to blueprints and wiring diagrams on Class 1 and 11 burner panels. Locates, drills and taps holes for mounting control units using hand tools and small power tools. Lifts and positions breakers, relays, contactors, bus bars, transformers, insulators, regulator cabinets, condenser units, motor and generator set, meters, plugging devices and fuse blocks to mounting holes and mounts them to cabinets. Cuts, strips, bend and forms wire cable, conduit and tubing used to connect control instruments. Responsibilities Mounts components and wires various panels working from blueprints and wiring diagrams. Work is generally of a somewhat repetitive nature and involves the less complex panels and limited to Class I and 11 burner panels. Uses various power and hand tools to accomplish the job. Complies with all safety rules and standards and reports to their supervisor any condition out of his/her control. Maintains a neat, clean, orderly, and functional work area at all times. Assists other department employees. Performs user maintenance on all machines and equipment. Work must conform to Webster Engineering quality standards. Performs other related duties as required. Will normally work under the supervision of Assembly Support Lead, but will, to some degree, be required to work with minimum supervision and assistance in most phases of the job performance Requirements High School Diploma Follow technical instructions, interpret engineering blueprints and technical terms. Discern quality of parts and materials used in production. Inventory parts and tools used in the assembling process. Follow company procedures and directives. Test finished products for defects. Maintain the tools used to create products. Keep a clean and well-maintained workspace. Physical Demands The employee is regularly required to stand; walk; use hands/fingers to handle or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move upwards of 50 pounds. The employee is occasionally exposed to outside weather conditions and a plant which is not temperature controlled. Inside Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. Any offer is contingent based upon the successful completion of a background investigation, a mandatory pre-employment drug test (we will arrange for you), and your ability to comply with federal law requiring you to show proof of your ability to work in the United States on your first day of employment.

Job Description The compensation range provided for this role is an estimate based on available market data. The actual amount may vary considering the candidate's knowledge, skills, abilities, and geographic location. If you have questions, please discuss the flexibility and details of our compensation philosophy with your recruiter. Benefits Paid Time Off (PTO) Paid Holidays + 1 Floating Holiday of YOUR Choice Medical, Dental, and Vision Insurance Options 401(k) Retirement Plans + Employer Match 100% Company-paid Basic Life Insurance, Short and Long-Term Disability Insurance, Teladoc Services, and Employee Assistance Program (EAP) HSA, FSA and Pet Insurance Options Safety Boot and Prescription Safety Glasses Reimbursement Program Gym Membership Reimbursement And more! What You Can Expect Working in the Shop Technician I Position The Shop Tech I works under the direction of the Production Supervisor and is responsible for the interior build-out of the construction of storm shelters and other industrial buildings. As a Shop Tech I, you will be responsible for reading a tape measure, running a hand sander, a scraper, and inspecting your work to make sure the metal has been deburred correctly. You will also be responsible for pressure washing and or sand blasting units. Our team of plant employees ensures that safety and quality are top of mind in the production of our products. As a Shop Tech I, you are integral in supporting RedGuard Diversified Structure's goal of delivering customers a quality product on time. Responsibilities Reads a tape measure, runs a hand sander, uses a scraper, and inspects work to make sure the metal has been deburred correctly. Produces work in accordance with industry standards. Cross-trains in various construction skill sets and uses skills in multiple stages of the manufacturing process. Examines products or work to verify conformance to specifications and ensures the quality of products or work. Inspects machines and equipment to ensure specific operational performance and optimum utilization. Operates a forklift safely and efficiently to move materials, parts, and equipment within the shop or warehouse. Follows established safety and security rules and regulations and maintains a safe and clean work area and environment. Minimum Qualifications Prior job experience preferred. No prior forklift experience required. Will receive on-the-job training and may be eligible for forklift certification as part of development into higher-level technician roles. Ability to read a tape measure and practice basic arithmetic. Ability to use hand tools and power tools. Excellent organizational skills and attention to detail. Ability to follow instructions and provide consistent work. Works well as part of a team. Basic computer skills. WORK ENVIRONMENT The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Heavy work. Exerting up to 100 pounds of force occasionally, and/or up to 50 pounds of force frequently, and/or up to 20 pounds of force constantly to move objects. • Prolonged periods standing, climbing, bending, and kneeling. • Must have manual dexterity, a good sense of balance, and excellent hand-eye coordination. • The worker is frequently required to operate machinery and/or power tools. Must be able to safely work with sharp tools or power equipment. • The worker is subject to environmental conditions. Protection from weather conditions but not necessarily from temperature changes. • The worker is subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. • Must have full use of both hands and arms to perform tasks requiring coordination, strength, and fine motor skills. This includes handling tools or equipment, lifting or carrying materials, operating machinery, and performing repetitive or precise movements with both hands simultaneously. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Except where prohibited by state law, all offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify. This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR). Non-U.S. persons selected must meet eligibility requirements for access to export-restricted information. The ITAR/EAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please provide a brief description of your reasonable accommodation to accommodations@lange.us.com Department/Division: Plant Reports to: Fabrication and Production Manager Location: Wichita, KS Shift: 1st Overtime: As Required Position Type/Hours: Full-time | M-T | 7:00a - 5:45p Travel Requirement: Less than 5% FLSA Status: Non-Exempt About The Company Purchased by RedGuard in 2021, RedGuard Diversified Structures is a trusted provider of structures for severe weather and asset protection. Our two brands, Survive-A-Storm Shelters and Matador Steel Buildings, offer comprehensive safety solutions for families and businesses. Our tornado shelters are debris and impact-tested through the Texas Tech Wind Institute to ensure safety, and they bear the seal of the National Storm Shelter Association. Matador Steel Buildings offer rugged steel pole barn structures to protect your assets. We prioritize safety and quality by using high-quality steel manufactured in the USA. With a focus on quality and attention to detail, RedGuard Diversified Structures is the trusted choice for protective structures. For more information, visit ******************************************

Job Description Harvest production worker is responsible for beef carcass preparation while working safely. They will be responsible for being an example to other team members using a continuous improvement mentality and will work to perpetuate a “Creekstone Proud” culture through attitude and actions. ESSENTIAL FUNCTIONS: • Trimming of the carcass to remove contamination • Removal of hide using knives, handsaws, or other powered equipment • Harvest all offal products and prepare to customer specifications • Adhere to all humane handling procedures, sanitary dressing, safety practices and all aspects of regulatory compliance • Work environment is hot and damp with temperatures up to 90 degrees KNOWLEDGE, SKILLS, AND ABILITIES: • Stand entire shift on concrete and/or elevated platform • Lifting, pulling, pushing, or carry up to 60 lbs. for knife positions and 100 lbs. for non-knife positions on occasion • Tolerate repetitive motion using your hands/wrist/arm/torso and legs • Will be required to use the proper equipment to trim, debone, skin meat product. • Willing to wear necessary personal protective equipment such has hardhat, steel-toed-boots, gloves, etc. • Must be willing to work with sharp knives, some power equipment and / or saws • Ability to work in hot/damp indoor working conditions • Must be able to work at a steady pace PHYSICAL REQUIREMENTS: • Climbing occasionally • Stooping occasionally • Crouching occasionally • Standing for 8 or more hours per day • Walking frequently • Pushing frequently • Pulling frequently • Gasping frequently • Repetitive motions frequently • Lifting: 0 - 100# Creekstone Farms Premium Beef LLC is an Equal Opportunity Employer

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers . If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Unless specifically stated otherwise, this role is "On-Site" at the location detailed in the job post. Job Description Summary Our facility in Maize, KS is growing and we are looking for talented individuals to join our NIGHT SHIFT team! At our facility, we manufacture Coleman Propane Camping cylinders. The assembler position performs assembly operations to produce LPG cylinders and monitors cylinders to required specifications. Responsibilities Gets job instructions Handles materials to and from workstation Gets work station and equipment ready for production Makes minor changes and adjustments to machinery and equipment such as changing tools and, notifies leads and supervision when process out of standard operating procedure Loads and unloads conveyor Maintains records such as oven temperature, cooling temperature and other records as required Verifies tools and machinery are appropriate for operation Counts, packages and/or crates and identifies parts and products on assembly lines May work in groups or individually as assigned Maintains quality standards Reports all material shortages Maintain work area using 6S Principles Other duties as assigned Additional Qualifications/Responsibilities Desired Experience To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High school diploma or general education degree (GED); or a minimum of two months related experience and/or training; or equivalent combination of education and experience. Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Ability to add, subtract, multiply and divide using whole numbers, common fractions and decimals. Ability to apply common sense understanding to carry out detailed written or oral instructions. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands and fingers to handle or feel; reach with hands and arms and talk or hear. The employee is frequently required to walk. The employee must regularly lift and /or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Schedule: Day Night 6a - 6p - Night shift 6p-6a. 2 days on, 2 days off, 3 days on, 2 days off, 2 days on, 3 days off. Starts on a Monday, getting a 3 days weekend off every other week. (one week is 40 hours plus 8 hours of OT, the next week is 36 hours. Paid biweekly which averages 42 hours a week) - basically the days you work one week, you are off the following week and they rotate.

**A Snapshot of Your Day** Join Siemens Energy's manufacturing team and play a pivotal role in shaping the future of energy. As a Floor Assembly Technician and Crane Operator, you will be responsible for the safe and efficient assembly of critical energy components, utilizing overhead cranes to move large, heavy equipment and materials throughout the production floor. Your day will involve a dynamic mix of hands-on mechanical assembly and skilled crane operation, ensuring quality and safety are maintained to the highest standards. Relocation will not be offered for this role. **How You'll Make an Impact** + Performs a sequence of predefined, specialized and different mechanic assembly operations, which includes specialized testing and problem analysis, in cooperation with a team of differently qualified assembly technicians. + Contributes to planning and effective resource allocation in the production group (mechanic assembly). + Plans own work steps in cooperation with other team members. + Performs a set of qualified assembly operations, which may include all electronic, electro-mechanic and mechanic assemblies or sub-assemblies. + Constantly monitors availability of parts, tools and machines needed to complete product in the relevant subsequent steps of the overall assembly process. + Uses specific equipment and/or a range of specialized tools and machines and maintains functionality. + Contributes to plan, execute and analyze the results of test routines and procedures, often in a complex test environment + Assists in resolving routine manufacturing related problems affecting daily operations. + Follow established safety procedures. + Able to achieve the crane operator and rigger certification and complete complex lifts safely. **What You Bring** + High school diploma or equivalent. + Minimum 1 year of experience as mechanical assembler preferred. + Ability to use hand tools, power tools and lifting equipment. + Ability to meet production standards. + Stoop, kneel, crouch, twist. + Will need to pass basic math skills test to demonstrate ability to obtain certification. Qualified applicants must be legally authorized for employment in the United States. Qualified applicants will not require employer sponsored work authorization now or in the future for employment in the United States. **Who is Siemens Gamesa?** Siemens Gamesa is part of Siemens Energy, a global leader in energy technology with a rich legacy of innovation spanning over 150 years. Together, we are committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. As a leading player in the wind industry and manufacturer of wind turbines, we are passionate about driving the energy transition and providing innovative solutions that meet the growing energy demand of the global community. At Siemens Gamesa, we are constantly seeking individuals to join our team and support our focus on energy transformation. **Rewards/Benefits** + Career growth and development opportunities + Supportive work culture + Company paid Health and wellness benefits + Paid Time Off and paid holidays + 401K savings plan with company match + Family building benefits Equal Employment Opportunity Statement Siemens Energy is an Equal Opportunity and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law.

Start a life-long career with a fast-paced, family oriented company! Mill Creek Truss, a division of Mill Creek Lumber & Supply Company is looking for Truss Assemblers. Help us build America! Mill Creek Lumber & Supply Company has been in business since 1934 and is a strong, growing regional industry leader. We offer: * A great place to work with a friendly team of employees * Competitive pay with the opportunity to work overtime * A benefits package that includes company medical contribution towards the Health Savings Account * Dental & Vision insurance * Life insurance as well as short- & long-term disability * All full-time employees are eligible the first of month following 30 days of employment * A 401(k) Retirement Savings Plan with match Job Location: 3363 S Halstead Rd, Halstead, KS 67056 A Truss Assembler is a critical component of the process of manufacturing our truss products. * Place connector plate at each truss joint by hammering in place * Fit parts together in accordance with the prescribed manner and in accordance with quality standards * Use a mechanical roller to embed the connector plate to the truss * Send the truss through the finished press * Move each assembled truss to the yard for delivery preparation * Stack completed products in accordance with established procedures, and if required, may cover label and band components to finish the product * Operate hand tools, saws, presses, and pneumatic staple and nail guns as required to complete the assembly process * Inspect materials and finished products to ensure compliance with standards * Work with various building materials, including wood and metal * Assist in work area setup and cleanup * Other duties as assigned