Assembly line worker jobs in Yonkers, NY

Requirements Perform vacuum bagging and related processes for fabrication and curing composite parts. Clean and smooth molds, cores, and core boxes, and repair surface imperfections. Assemble cores into lower sections of molds, to create mold assembly per work instructions. Clean and maintain work area to ensure safe and efficient work environment. De-molding cured parts Ensure compliance with company policies and safety regulations Document materials utilized in creating parts for traceability purposes. Work to meet production goals and deadlines Using scanner for time/attendance/work traveler. Qualification and Education Requirements: General knowledge of practices and procedures used to fabricate composite parts or similar is preferred. Ability to read and correctly interpret instructions in English is a must. Ability to use measuring instruments. Ability to lift rolls of material. Ability to use a computer High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Benefits & Wages: 401K Flex Scheduling Health, Dental and Vision Health Saving Account Life Insurance Disability Benefits Paid Vacation & Holidays Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand; use hands to finger, handle, or feel and reach with hands and arms. The employee must frequently lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. This position involves exposure to projects and contracts subject to the International Traffic in Arms Regulations (ITAR). As a result, only U.S. Citizens or Permanent Residents (Green Card holders) are eligible for employment in this role. Applicants must meet these requirements to be considered. Salary Description $19-$21 Hourly

• Handling and processing of quartz crystal resonators through various production sequences in a cleanroom environment. • Use tweezers to carefully handle and assembly small parts under a microscope. • Load completed parts onto trays with precision, ensuring no parts are dropped or damaged. • Follow standard operating procedure (SOP) documents to maintain consistently and quality in all tasks. • Collaborate effectively with team members to meet production goals. Education and Required Skills: • High School Diploma • Technical School graduate a plus. • Possess basic reading, writing and math skills (addition and subtraction). • Have strong verbal communication skills to interact with team members and supervisors. • Demonstrate a steady hand and excellent hand-eye coordination for working with small components. • Maintain a high level of attention to detail to ensure accuracy and quality. • Show a willingness to learn and adapt in a team environment. *This is a fully on-site role

Benefits: Health insurance Paid time off Training & development We are looking to employ an efficient and hard-working Warehouse Forklift/Production Operator to process all incoming and outgoing merchandise according to established warehouse guidelines. Responsibilities * Report any broken, damaged, or malfunctioning warehouse equipment to management, taking inventory of all warehouse merchandise, and ensuring that fragile merchandise is suitably packed to prevent damage during transit. You should also be able to perform basic cleaning duties to keep the warehouse tidy. To be successful as a warehouse operator, you should be detail-oriented, adept at operating forklifts, and able to stand for extended periods. Ultimately, an outstanding warehouse operator should adhere to all warehouse safety practices as well as demonstrate exceptional organizational, time management, and communication skills. A production worker is responsible for operating and maintaining equipment in a factory or warehouse and preparing items for distribution. The job description of a production worker involves assembling and checking product parts, ensuring that all machinery runs smoothly, and assisting in the shipment of items. This is a temp to perm position with opportunity of full-time hire. M-F from 8am to 5pm $20/hr.

Assembly Worker Duration : 4 Months Contract Start Time : 08:00 AM End Time :05:00 PM Total Hours/week : 40.00( Mon- Fri) Qualifications: 3 years' experience assembling small products consisting of precision injection molded plastic and metal parts. Experience using bench equipment such as adhesive curing equipment, ultrasonic welders, magnifying glasses and loops to inspect results. Experience using measurement devices like pin gauges, go-nogo gauges and simple tools and fixtures. Must be able to read and follow detailed written instructions. Experience working in a medical device manufacturing environment preferred. Experience reading mechanical engineering drawings and specifications a plus. Responsibilities Reporting to an Engineer and working with a dedicated cross-functional team, the candidate will assemble, inspect and test small precision medical devices. Candidate must be able to follow written mechanical assembly procedures, detailed instructions and verbal direction. The candidate must be able to recognize specific part and product defects and follow rework procedures. The candidate must be able to learn and properly use all tools and equipment required. The candidate must follow Corporate and Divisional Quality systems and comply with all regulatory and safety guidelines. Specific responsibilities may include (but are not limited to) the following: using fixtures for assembly, testing, and inspection, and work with engineers and assemblers to complete assigned tasks.

It's fun to work in a company where people truly BELIEVE in what they're doing! We're committed to bringing passion and customer focus to the business. The Cable Assembly Precision Soldering Associate is responsible for performing precision hand soldering and cable assembly by hand for complex cable and harness solutions. This position ensures all work meets the requirements of IPC-A-610, IPC-A-620, J-STD-001, and customer-specific quality standards. This position supports both prototype and production builds, contributing to the success of high-mix, low-volume wire and cable assembly organization in a highly-regulated aerospace, defense, and medical environment. Key Responsibilities * Perform precision hand soldering using various types of techniques such as solder cups, J-hooks and through-hole in order to assemble and build highly complex cables and wire harnesses. Must be able to solder without burning through the insulation or connectors. * Requires a high level of accuracy to support manual assembly and production of our cable & wire harness products. This role is required to follow IPC and engineering standards. * Inspect solder joints and assemblies for quality compliance per IPC-A-610 Class II and III criteria, IPC-A-620, and J-STD-001. * Use soldering irons, mag-lights, and ESD-safe tools safely and effectively. * Interpret engineering drawings, work instructions, and assembly documentation to ensure accuracy and following detailed instructions. * Identify and report nonconformances, process deviations, or quality issues promptly. * Maintain ESD compliance and ensure safe handling of sensitive electronic components where required. * Support process engineers and production leads in troubleshooting assembly and solder-related defects and continuous improvement activities. * Participate in 5S and Lean manufacturing initiatives to maintain an organized and efficient workspace. * Accurately complete production records, inspection logs, and traceability documentation in compliance with AS9100 and ITAR regulations. * Perform other duties as required to support a wide variety of cable and wire harness production assembly. Qualifications Education / Experience: * High school diploma or GED required; technical training or IPC certification preferred. * Minimum 1 year of precision soldering experience. * Wire, cable or harness assembly soldering in an ISO- or AS9100-certified environment preferred. * Experience in aerospace, defense, or medical device manufacturing strongly preferred. Skills / Competencies: * Proficiency in IPC-A-610, IPC-A-620, and J-STD-001 soldering standards (certification preferred) in wire harness and cable assembly. * Strong manual skills (dexterity, detail-oriented), technical understanding (reading diagrams, basic math), and attention to quality standards, focusing on precise crimping, soldering, documentation, and testing. * Excellent hand-eye coordination, color vision (for wire color coding), and ability to use small hand tools. * Ability to view color coded components as they feed into a single assembly. * Ability to hear part assembly clicking into place to ensure quality connections. * Ability to read and interpret assembly drawings, schematics, and work instructions. * Team-oriented, reliable, and quality-focused. * Must be a U.S. Person per ITAR regulations (citizen or lawful permanent resident). Physical and Work Environment Requirements * Work involves manual assembly to precision level of detail with your hands for 8-hour shifts per week. * Must be able to sit, stand, bend and work with hands for long periods. * Manual dexterity and fine motor skills required for detailed soldering work. * Capable of lifting of up to 25 pounds or heavier weight on a less frequent basis throughout the day. Benefits * Competitive hourly pay * Quarterly Manufacturing Bonuses * Medical, dental, and vision insurance * Paid time off and holidays * 401(k) retirement plan with a company matching * Training and advancement opportunities within wire harness and cable manufacturing In compliance with pay transparency requirements, the anticipated starting pay for new hires for this position is between $18-$20 per hour. Full-time employees are also eligible for performance based bonuses and benefits. This is not a guarantee of compensation or salary, as a final offer amount may vary based on factors including but not limited to experience, education, location, and shift. The specific programs and options available to an employee may vary depending on the date of hire, schedule type, and hours worked. r If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us! Creation Technologies is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you require any accommodations to complete the application process or need the job posting in an alternative format, please email Accessibility@creationtech.com. You will be connected with our Talent Acquisition team. If you are contacted regarding the position, please inform our Talent Acquisition team of any accommodations you may need during the recruiting process. All information related to accommodation requests will be handled confidentially. Canada: Title for the position will be in accordance with applicable national and local laws.

At Standard Bots, we're revolutionizing real-world automation by making robotic systems accessible to everyone. Our AI-powered platform enables robots to tackle unprecedented challenges through an intuitive instruction interface, bringing the power of software automation to physical spaces. About the Role We're seeking an Assembly Technician to build and test our revolutionary robotic systems. This is an exciting opportunity to apply hands-on manufacturing expertise to cutting-edge robotics technology. We're looking for detail-oriented technicians ready to partner closely with our production manager and the broader engineering team to assemble systems. If you're excited about assembling precision hardware and want to be part of the team bringing next-generation robots to life, we'd love to hear from you. This role is on-site at our manufacturing facility in Glen Cove, NY. This is a first shift position (Monday-Friday, daytime hours). Note: We are unable to sponsor Visas for this role. In this role, you will: Assemble production robots and components according to specifications Report quality and process issues to Production Supervisor Maintain safe working environment following company and industry standards Manage material handling and distribution to work stations Contribute to continuous improvement initiatives Required Qualifications: High School Diploma or equivalent 2+ years experience in mass production environments 1+ year experience in assembly, maintenance/repair, and/or working with hand tools, etc. Ability to lift up to 50 lbs Strong attention to detail Effective communication skills Ability to prioritize competing tasks Collaborative team player Preferred Qualifications Associate's or Bachelor's degree Experience in automotive, aerospace, industrial, or electromechanical manufacturing Machine shop equipment experience OSHA knowledge Compensation and Benefits: This is a full-time, hourly position with a pay range of $30.00 to $36.00 per hour, depending on experience. Base salary is just one part of the overall compensation at Standard Bots. All full-time employees are eligible for employee stock options. We also offer a package of benefits including paid time off, medical/dental/vision insurance, life insurance, disability insurance, and 401(k).

Production Line Worker The production line worker will be able to work on the production line with consistent speed and accuracy while maintaining production standards and work towards improving productivity without compromising quality. Supervisory Responsibilities: None Essential Duties and Responsibilities: Perform production duties such as Packing, and manual lifting. Verify the product is sealed, has correct smart date label and packaged correctly. Move product and inventory using a hand jack. Report defective materials or questionable conditions to the department supervisor Maintain the work area and equipment in a clean and orderly condition and follow prescribed safety regulations Perform related duties as required by supervision May be moved to other lines as workload requires Complies with all Company and Federal Policies, Procedures and Regulations Achieve departmental KPIs Job Description may change with or without prior notice Education and/or Work Experience Requirements: Good verbal and written communication skills, including ability to effectively communicate with Supervisor and other employees. Ability to carry out assignments to completion within parameters of instructions given, prescribed routines, and standard accepted practices. Good Work Ethic, Sense of Responsibility, Hardworking, Energetic. Physical Requirements: May be required to stand for long periods of time May involve some repetitive motions Must be able to lift up to 50 pounds May also engage in frequent bending, stooping, squatting, pushing and pulling of parts and part containers Must be able to work in a cold environment Good Work Ethic, Sense of Responsibility, Hardworking, Energetic Benefits offered to our employees: Medical, Vision, Dental, Long Term Disability and Life Insurance 401(K) after 1 month of service Vacation Days, paid Holidays and paid Sick Time Employee Referral Program Safety Training

Job DescriptionPower-Flo Technologies is seeking an assembler to join our New Hyde Park shop. We design and build custom switchboards and panelboards for a variety of customers. Full Time, Monday - Friday, 7 AM - 3:30 PM. Pay Range: $18 - $22/hour Competitive Benefits Package Health coverage (medical, dental, vision) PTO and Paid Holidays 401K EAP Assembler Required Skills Previous experience or training in a shop/industrial setting Mechanically inclined Familiar with taking measurements and working with a ruler Familiar with assembling components Able to follow instructions in a proper manner Familiar with shop tools (hand tools, power tools, etc) Valid and clean driver's license to operate company vehicles as needed Assembler Daily Tasks Reading and understanding blueprints prior to starting a project Sourcing the materials to be used in the project Measuring and cutting materials to specifications Assembly of switchboard enclosures and interior electrical components Preparing metal surfaces for finishing Working with design team to complete switchgear packages Checking finished work to make sure that it falls within the tolerances marked on the blueprints Preparing completed packages for shipment Assembler Physical Requirements Ability to safely use and lift equipment weighing 50 lbs. Ability to work standing up to 8 hours per day. This position occasionally requires sitting, climbing, balancing, stooping, kneeling, crouching, and crawling. Exposure to dust, loud noise, and temperature changes. Candidates must have a valid and clean NY State driver's license to operate company vehicles as needed. About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Manufacturing Assembly in Fairfield, NJ Pay: $17/hr. Schedule: Mon-Fri 6am-2:30pm Benefits, and Weekly Pay iBoost Talent is hiring for an Assembly / Manufacturing Associate located in Fairfield, NJ. Our positions are full-time, year-around employment with paid training. Pay $17.00 per hour Schedule 1st Shift; Mon-Fri 6am-2:30pm with occasional overtime Position Overview: This position is responsible for performing light assembly, machining, or packaging of manufactured products while maintaining the specified the quality, efficiency, and inventory control requirements. Work assignments will be scheduled based on training proficiency. depending on the tasks assigned for the day, you may have to sit or stand more or less frequently. Typical assembly work is repetitive in nature. Steel-toed shoes are required for working in this position. Regular production/warehouse environment (no air conditioning). Key responsibilities include: Understanding and executing verbal instructions related to your duties. Inspecting work to ensure quality and accuracy. Transporting completed products to designated locations using proper material handling methods. Monitoring and replenishing raw materials as needed for operations. Completing all required documentation and electronic data updates. Preparing and packaging units for shipment. Assisting with various duties across departments as necessary. Maintaining a clean workstation in accordance with 5S procedures. Achieving or exceeding pre-established performance objectives. Upholding our core values: Integrity, Customer Responsiveness, Innovation, Passionate Contribution & Empowerment, and Continuous Improvement. Identifying and reporting workplace hazards while participating in safety programs and initiatives. Job Requirements: Fluency in reading, writing, and speaking English. Basic mechanical, math, and problem-solving skills. Proficiency in operating equipment such as basic machining posts, saws, paint sprayers, and hoists. Ability to read and interpret assembly drawings, blueprints, BOMs, and associated procedures. Competence in using measurement tools like tape measures, micrometers, and calipers. Familiarity with basic hand tools (hand drills, screwdrivers, hammers, etc.). Flexibility to adapt to changing priorities and tasks. Strong teamwork skills and the ability to follow directions. Proven reliability in attendance and punctuality. Understanding of basic lean principles (5S, Kanban). Preferred Qualifications: High School diploma or GED. Previous manufacturing experience is a plus. Working Conditions/Physical Demands: This position requires standing for 8 hours a day, with coordinated hand and finger movements for grasping, manipulating, and assembling objects. You will frequently use vibrating/pneumatic tools and may need to reach overhead, bend, twist, stoop, kneel, or squat. The role involves lifting and carrying up to 40 lbs regularly. Depending on the tasks assigned for the day, you may have to sit or stand more or less frequently. Typical assembly work is repetitive in nature. Steel-toed shoes are required for working in this position. Regular production/warehouse environment (no air conditioning). Note: Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. iBoost Talent is proud to be an Equal Opportunity Employer. You will be considered for this position based upon your experience and education, without regard to race, color, religion, age, sex, national origin, sexual orientation, ancestry; marital, disabled or veteran status. We are committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment. EOE Thank you for your interest in iBoost Talent, we are proud to be an Equal Employment Opportunity Employer and participate in the E-Verify eligibility confirmation program.

COMPANY CULTURE Our focus is to deliver world-class solutions to our customers, on time and of the highest quality as the preferred supplier of highly engineered, energetic, and pyrotechnic devices while developing our associates and maximizing long-term value for our shareholders through organic growth and targeted acquisitions. GENERAL STATEMENT OF DUTIES: An individual who under moderate supervision applies standard procedures to perform a variety of component assembly tasks, ensuring products meet our high standards. ESSENTIAL DUTIES AND RESPONSIBILITIES: An Assembler is an individual who under moderate supervision applies standard procedures to perform a variety of component assembly tasks, ensuring products meet our high standards Assembles components in accordance with drawings and operation sheets. Responsible for weighing, loading and pressing operations. Handle tooling and fixtures / use various hand tools to produce or modify parts. Maintains count and order progress and logs in time / quantities. Closes and assembles units (use of crimping and closure tools and epoxy applications). Soldering tasks, i.e. small wire soldering, terminal soldering, bridge wire welding. Assists with the packaging of pyrotechnic assemblies where required. Follows required company safety practices and quality procedures. Follows procedures as defined by CAD policies, procedures and ISO9001 requirements. Maintains confidentiality of all information processed. Perform other related duties as assigned. PHYSICAL DEMANDS: While performing the duties of this job, the employee is occasionally required to stretch, bend, kneel and stoop. The employee is regularly required to walk, communicate, and reach with hands and arms. The employee is frequently required to sit, stand, and use hands to finger, handle, or feel. The employee must occasionally lift and/or move up to 50 pounds using appropriate moving devices. Specific vision abilities required by this job include close vision, color vision, depth perception and ability to adjust focus. WORK ENVIRONMENT: While performing the duties of this job, the employee is regularly exposed to solder, fluxes, cleaners, epoxies, and masking agents while using appropriate personal protective equipment. Works in a temperature controlled environment. The noise level in the environment is usually low to moderate. DISCLAIMER The above information on this description has been designed to indicate the general nature and level of work performance by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Cartridge Actuated Devices is an Equal Opportunity Employer and encourages the application of female, minority, disabled, and veteran candidates. Due to the potential for exposure to ITAR controlled data, the incumbent in this role must be a US Person (US Citizen or US Permanent Resident). Due to the nature of our products, To the extent applicable to an employee's role, each employee must be able to obtain (and maintain) the ATF Possessor License as a condition of employment. Employment with Cartridge Actuated Devices is contingent upon the successful completion of a background investigation, including any required Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) screening, and drug screening, as permitted by applicable law. The background investigation may include verification of employment history, education, criminal records, ATF-mandated checks, and other relevant information to determine suitability for employment. The drug screening will be conducted in accordance with state and federal regulations. Failure to successfully pass the background check, ATF screening, or drug screening, or the provision of false or misleading information during the application process, may result in withdrawal of a job offer or termination of employment. By proceeding with the application process, you acknowledge and consent to the background, ATF, and drug screening requirements as described above.

Job DescriptionPosition Description: Help the manufacturing team assemble Genadyne UNO pumps as per customer orders Primary Objective: To assemble pumps and provide cross-functional support to warehouse, CSR and quality department to fulfill orders. Major Areas of Responsibility: Assemble pumps Conduct quality inspection on assembled pumps Verify receiving items for pump assemblies Create records of pumps that are built Maintain appropriate pump parts and accessory storage and handling activities Coordinate with NPWT manager on incoming orders Rework, Repair/Service pumps as required Specific responsibilities (tasks): 1) create and manage pumps, PCBs, part numbers 2) Perform quality test on pumps 3) create and manage documentation of pumps assembled, reworked, repaired and serviced 4) Able to provide technical support to the customers/manager or R&D team as required Requirements Education: High School Graduate Abilities: Ability to work independently, exhibit strong initiative Quick Learner Able to read and write in English Strong interpersonal skills - able to interact with all levels of management as well as customers if required Team player, assembly experience preferred Rate: $18.00/hr. Powered by JazzHR NqTEIZH512

Schivo Medical manufactures a diverse range of essential medical technology solutions. Working with us, you will be manufacturing or supporting the manufacture of a vast array of different products including robotic surgery instruments, neurosurgical tools, and cardiovascular closure devices that treat chronic disease in new ways so people can live better and longer. As an employee of Schivo Medical, you will tackle a wide array of problems, including some of the world's greatest medical challenges. We are seeking to hire a part time worker.. ***Must work Saturday and Sunday and one day during the week**** Assembly/Product sorter Job Description: Assembler/Visual Sorter sort parts, organizes, and completes visual checks on parts using a microscope. Essential Duties and Responsibilities: Daily secondary processing of components including but not limited to assembly, visual inspections, gauge inspections. Understand various documentations, Follow Travelers, work instructions, secondary operation report, and blueprints. Assemble components to meet the final desired standard. Visual inspection in accordance with acceptance criteria Use various measuring instruments for dimensional inspections. Inform supervisor of any major defects/issues with components Skills: Great hand and eye coordination Ability to multi-task in a fast-paced environment Attention to detail and organized in general. Education: High school diploma or a GED Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

Full-time Description The assembly operator oversees and operates machines necessary to swage cable, to perform cable end treatments, to swage fittings, to cut or trim cable, to grind assemblies to length and to assemble cable components. Counts packages and labels completed cable assemblies. This position is responsible to maintain acceptable production outputs and quality of wire/cable assembly. Duties and Responsibilities: Takes and follows directions from both, operational performance and job requirements from Supervisors, Facilitators on a job by job basis. Clear area of previous job materials. Completes job cards, routers and job documentation as required. Operates lathes, welders, presses, grinders, cable cutters, swagers, packaging equipment and other equipment necessary to manufacture cable assemblies. Maintains material traceability by completing records of materials usage for each job. Monitors and performs visual and tactile inspection of assembled parts. Performs proof-loading of assembled parts. Gathers samples for start-up and in-process testing and inspection. Packages and labels processed material according to job card instructions. Reports part or process quality issues to their supervisor or any quality personnel. Any other duties as assigned by supervisor. Requirements Prior experience is preferred but not required. Demonstrates ability to self-motivate and to problem solve in a fast-paced setting. Excellent organizational skills and attention to detail. Must have good documentation practice. A proven understanding of part workmanship. Ability to analyze data and make recommendations. Ability to troubleshoot manufacturing defects. Strong interpersonal skills. Ability to seek and accept feedback from others. Ability to speak, read, and write in English preferred but not required. Education and Experience: High school diploma or equivalent. Working conditions: While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes or airborne particles. The noise level in the work environment is occasionally high requiring safety equipment to be utilized. Physical requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job; e.g. standing, sitting, walking throughout the facility and stairs. Ability to lift items weighing up to 50 lbs. Pay: $17.00-$17.00/hour Benefits: Eligible after 1st day: Paid holidays Employee Assistance Program Eligible after 90-day probation period: Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account Vacation time Sick time Eligible after 1 year of service: 401(k) with Employer Match Potential for discretionary bonus The final pay offered to a successful candidate wil l be dependent on several factors that may include but are not limited to the type and years of experience within the job, the type of years and experience within the industry, education, etc. We're proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don't discriminate based on an individual's race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), a typical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at **********************.

TE Wire & Cable LLC As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. The Cable Harness Assembler position is responsible for assembling, testing, and installing harnesses, and related components in an aerospace manufacturing environment. This role requires precision, attention to detail, adherence to engineering specifications and safety standards. Key Responsibilities: * Assemble and install electrical components, wiring, and harnesses according to engineering drawings, and specifications. * Using manual & powered tools to perform delicate tasks such as stripping, crimping, soldering, and connector assembly. * Conduct testing such as electrical continuity and HI POT testing on cable harness assemblies to ensure quality and compliance to requirements. * Read and interpret engineering documentation, including drawings, and wiring diagrams. * Inspect, verify, and document each step of the assembly process of components and finished products. To ensure quality standards are in accordance with engineering specifications. * Help improve manufacturing process by communicating problems or concerns. * Confirm all appropriate materials needed to complete a job, according to the Bill of Materials, are with the work order (i.e.: wire, hardware, and miscellaneous components) as well as printing out labels for each work order. * Utilize Lean & Continuous Improvement techniques to drive quality & productivity. * Other duties as assigned. Requirements: * Education: High school diploma or equivalent. Technical certification in electrical assembly or related field preferred. * 2 Years Experience with wire harness assembly, and able to read wire harness installation drawings/wiring diagrams/work instructions. * Experience with IPC/WHMA-A-620, IPC J-STD-001 desired. Our Competitive Benefits Include: Medical (3 Plan Options), Dental, Vision, Health Savings Account, Flexible Spending Accounts, 401K & Roth 401K (with generous Company Match), Paid Basic Life & AD&D insurance, Employee Assistance Program, Paid Parental Leave, Paid Holidays and Vacation. Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.

Full-time Description About Generant: Generant was founded in the early 1930's, is headquartered in Butler, NJ. We design and manufacture valves and pressure regulators for a wide variety of industries with a strong position in the Industrial Gases and Cryogenics, Medical Gases and Equipment, Energy, and Chemicals markets. Generant is 100% employee owned. We look for dedicated and talented people who accept the responsibilities of thinking like owners and embrace our mission as stated in our Quality Policy: Our Goal is to provide our customers, suppliers and employees true value. We believe this can only be accomplished through a strong commitment to continuous improvement in the quality of our products, services and working environment. Our ideal candidates: Are people who are personally motivated to produce high-quality work Are lifelong learners - driven to continually improve Are well organized Enjoy working in a team environment WE ARE CURRENLY LOOKING FOR 2ND SHIFT WORKERSMONDAY - FRIDAY 4PM - 12:30AM Job Summary: Assembler The primary function of the SECOND SHIFT Assembler is to assemble components into finished goods following engineering drawings and/or instruction from the Assembly Manager and Assistant Assembly Manager using various tools and fixtures. Essential Functions: Assemble parts using basic tools in a timely manner Must have excellent visual attention to detail Maintain accurate counts of items assembled Log in and out of work order control system Maintain clean working environment Perform the job with minimal supervision Due to the nature of the work, non-productive interaction with fellow employees must be kept to a minimum Perform other assignments as required by the Assembly Manager and Assistant Assembly Manager such as: Testing, Engraving, and/or Packaging Requirements Qualifications: Education/Experience/Skills: High School Diploma or equivalent Basic Math Skills (measuring, use of calculator) Ability to carry out detailed written and verbal instructions Must be comfortable using a computer tablet 2 years of Assembly work experience for a manufacturing company is a plus! Language Skills: Must be fluent in English and have very good verbal communication skills Must be able to read and comprehend written instructions Physical Demands: Must frequently lift up to 15 pounds and occasionally lift up to 25 pounds When performing the duties of this job, the employee is regularly required to sit, use hands to finger or handle or feel objects and tools or controls and talk or hear Employee is frequently required to reach with hands and arms Employee is occasionally required to stand, or walk Specific vision abilities require close vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Work Environment: Assembler may work near moving mechanical parts and is occasionally exposed to vibration Noise level is usually moderate Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Benefits: Medical, Dental, Vision, Employee Stock Ownership Plan (ESOP), 401k, Life and AD&D Insurance Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job DescriptionDescription: Cox & Company solves the aerospace industry's most challenging ice protection and temperature control problems. For over 80 years Cox has worked with OEMs, Tier 1 and Tier 2 Suppliers, as well as all major modification and finishing centers throughout the world. From initial design concepts through aircraft integration and operation, our company provides the highest quality full-lifecycle support to our customers. Cox & Company, Inc. is looking for an outgoing individual who will specialize in the manufacturing precision of using composite material in the Autoclave Area. Requirements: Perform vacuum bagging and related processes for fabrication and curing composite parts. Clean and smooth molds, cores, and core boxes, and repair surface imperfections. Assemble cores into lower sections of molds, to create mold assembly per work instructions. Clean and maintain work area to ensure safe and efficient work environment. De-molding cured parts Ensure compliance with company policies and safety regulations Document materials utilized in creating parts for traceability purposes. Work to meet production goals and deadlines Using scanner for time/attendance/work traveler. Qualification and Education Requirements: General knowledge of practices and procedures used to fabricate composite parts or similar is preferred. Ability to read and correctly interpret instructions in English is a must. Ability to use measuring instruments. Ability to lift rolls of material. Ability to use a computer High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Benefits & Wages: 401K Flex Scheduling Health, Dental and Vision Health Saving Account Life Insurance Disability Benefits Paid Vacation & Holidays Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand; use hands to finger, handle, or feel and reach with hands and arms. The employee must frequently lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. This position involves exposure to projects and contracts subject to the International Traffic in Arms Regulations (ITAR). As a result, only U.S. Citizens or Permanent Residents (Green Card holders) are eligible for employment in this role. Applicants must meet these requirements to be considered.

Hi- Rel Solder Hi-Rel Solder Assembler to join our manufacturing team. The successful candidate must have 2-3 year's experience. Perform precision hand soldering of surface-mount and through-hole components to IPC Class 3 standards. Responsible for assembling and soldering high-reliability printed circuit boards (PCBs) and sub assemblies in accordance with industry standards such as IPC J-STD-001, IPC-A-610. The candidate should have working knowledge of Operating soldering equipment, microscopes, and other assembly tools. Must be able to read and interpret assembly documents and engineering drawings. Education and Required Skills - High School diploma or equivalent and 2+ years in PCB or electronics assembly, preferably in a Hi-Rel or relative environment. - Proficiency in soldering to IPC J-STD- A-610 Class 3 standards. - Certification in IPC J-ATD-001 and/or IPC-A-610. - Experience in working under a microscope and magnification and with fine-pitch components. - Familiarity with ESD protection procedures. - Ability to read and understand technical documents and drawings. - Excellent attention to detail and manual dexterity. Strong computer and written skills is a PLUS, willing to train an enthusiastic applicant willing to learn a new skill. We offer a comprehensive benefit package including: Health Insurance, Dental Insurance, Vision, Life Insurance, Short Term Disability, Long Term Disability, Flexible Spending Option and 401K. We also offer Paid Time Off including: Vacation, Sick and Paid Holidays.

Power-Flo Technologies is seeking an assembler to join our New Hyde Park shop. We design and build custom switchboards and panelboards for a variety of customers. Full Time, Monday - Friday, 7 AM - 3:30 PM. Pay Range: $18 - $22/hour Competitive Benefits Package * Health coverage (medical, dental, vision) * PTO and Paid Holidays * 401K * EAP Assembler Required Skills * Previous experience or training in a shop/industrial setting * Mechanically inclined * Familiar with taking measurements and working with a ruler * Familiar with assembling components * Able to follow instructions in a proper manner * Familiar with shop tools (hand tools, power tools, etc) * Valid and clean driver's license to operate company vehicles as needed Assembler Daily Tasks * Reading and understanding blueprints prior to starting a project * Sourcing the materials to be used in the project * Measuring and cutting materials to specifications * Assembly of switchboard enclosures and interior electrical components * Preparing metal surfaces for finishing * Working with design team to complete switchgear packages * Checking finished work to make sure that it falls within the tolerances marked on the blueprints * Preparing completed packages for shipment Assembler Physical Requirements * Ability to safely use and lift equipment weighing 50 lbs. * Ability to work standing up to 8 hours per day. * This position occasionally requires sitting, climbing, balancing, stooping, kneeling, crouching, and crawling. * Exposure to dust, loud noise, and temperature changes. Candidates must have a valid and clean NY State driver's license to operate company vehicles as needed. About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Schivo Medical manufactures a diverse range of essential medical technology solutions. Working with us, you will be manufacturing or supporting the manufacture of a vast array of different products including robotic surgery instruments, neurosurgical tools, and cardiovascular closure devices that treat chronic disease in new ways so people can live better and longer. As an employee of Schivo Medical, you will tackle a wide array of problems, including some of the world's greatest medical challenges. You will be part of a company committed to helping you build a fulfilling and rewarding career. Deburring-finishing Operator Position Overview: Work in a team of 5-8 members, primarily responsible for deburring, buffing, and polishing of medical device instruments. Essential Duties and Responsibilities: Follow work instructions. Use a microscope to inspect your work. Use buffing motors to smooth, polish and deburr. Use Ultrasonic cleaning machine medical device components. Maintain necessary logs. Provide necessary information to other team members and departments. Trouble shoot minor errors. Report on job status/progress to members of management team. Maintain quality, safety control standards. Necessary Education, Skills, and Competencies (including licensing and certifications): Good eye coordination Ability to speak, read (English) Excellent communications skills Good vision Ability to handle delicate parts Flexible schedule, dependable and possessing willingness to learn new techniques Ability to sit or stand for prolonged periods of time Ability to concentrate on a single task for prolonged periods of time Benefits: 401(k) 401(k)match Dental insurance Health insurance Vision Insurance Generous Paid time off Employee referral program Free coffee and tea daily Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.