Assembly technician jobs in Albany, OR

The Production Home Assembler follows work orders and instructions in order to accurately and efficiently prepare and assemble building components and homes in a factory assembly line environment. Essential Duties and responsibilities: Operate various hand tools, power tools and equipment used to complete carpentry duties including: Circular Saw Table Saw Router Pneumatic Nail Gun (roofing, framing and finish work) Drills And other tools needed for measuring, cutting, fastening, and drilling Frame, layout and build floors Prepare, layout and build walls Layout, run and install electrical lines, switches, receptacles and panels/breaker boxes Install and prepare dry for finish tape, mud and texture Complete roof construction, decking, flashing and shingling Cabinet and or finish carpentry and trim, build and installation Installation of siding, windows and doors Painting of interior and exterior of homes Cooperate and promote a team concept with all other company employees Adhere to all rules and regulations, at all times Meet or exceed company safety standards Perform other tasks as assigned by management Minimum Qualifications: Must be at least 18 years of age Must be legally authorized to work in the United States Be able to read, write, and speak English High School diploma, preferred Knowledge, Skills and Abilities: Ability to read a tape measure Possess basic construction knowledge and comfortable using basic tools Excellent attention to detail Ability to read blueprints, a plus Ability to work in a fast-paced environment and multi-task Ability to trouble shoot and problem solve in a high-volume Versatility and willingness to transfer into various departments when necessary You must be able to communicate efficiently and clearly with other Team Members Working conditions: Continuous exposure to heat, cold, noise, and working outdoors. Must wear protective equipment while at the location Physical requirements: Requires walking, sitting, lifting, pushing, pulling and climbing to a significant degree Heavy Work-Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds or force frequently, and/or up to 10 pounds of force constantly to move objects While performing the duties of this job, the employee is regularly required to talk and hear, in order to communicate to employees as well as function safely around construction equipment Disclaimer: “This is intended to provide general information about the position. It is not an employment contract. As with all positions, the responsibilities and duties of this position may change. The company, in its discretion, may alter this job description at any time with or without notice.” EEO/AA Statement: Cavco Industries Inc., and all of its Subsidiaries are an EEO/AA (equal opportunity/affirmative action) institution and does not discriminate on the basis of sex, age, race, color, religion, physical or mental disability, creed, national origin, veteran status, sexual orientation, genetic information, gender identity, or gender expression in the programs or activities which it operates.

Job Description OptiTrack is seeking a detail-oriented and skilled Production Technician to join our manufacturing team. As a Production Technician, you will play a key role in ensuring the efficient and timely production of our high-quality motion capture systems. This is an exciting opportunity to join a leading technology company and contribute to the development of cutting-edge motion tracking solutions. This is an entry level position which may require applicants to work full-time through a temp agency before full-time OptiTrack employee. Responsibilities Perform assembly and testing of OptiTrack motion capture systems according to established standards and procedures. Troubleshoot and repair equipment as needed to maintain production flow. Collaborate with the production team to meet production targets and deadlines. Maintain accurate records of production activities and inventory levels. Adhere to quality control standards and participate in quality improvement initiatives. Follow safety protocols and maintain a clean and organized work area. Assist in training new production team members and provide ongoing support and guidance. Requirements High school diploma or equivalent. 2+ years of experience in a manufacturing or production environment. Strong mechanical aptitude and technical skills. Proficiency in using hand and power tools. Excellent attention to detail and ability to follow instructions and specifications. Ability to work effectively in a fast-paced, team-oriented environment. Good communication and interpersonal skills. Basic computer skills and familiarity with productivity software. Ability to lift and carry heavy equipment ( Lift 10 lbs daily and lift/move up to 50 lbs weekly). Familiarity with motion capture technology and systems (preferred). Experience with soldering and electronics assembly (preferred). Benefits EEOC Statement: OptiTrack is an equal opportunity employer, we believe in fostering a culture of equality, diversity, and inclusivity. Our commitment to this goal is clearly expressed in our zero-tolerance policy for discrimination and harassment of any kind, including on the basis of race, color, sex, age, religion, sexual orientation, national origin, disability, genetic information, pregnancy, protected veteran status or any other characteristic protected by applicable federal, state, or local laws. Our hiring practices ensure that decisions are based solely on qualifications, merit, and current business needs, while extending to all aspects of our operations - from recruitment and promotion to layoff and recall, to leave of absence, compensation, benefits, and training. We are committed to remaining a drug free workplace

Ascentec is hiring! We are looking for a full-time Assembly Technician for our Dallas, Oregon location. We are seeking someone who has a demonstrated willingness to work hard and is experienced with working with precision machined parts. This is a position that presents a great opportunity for someone with strong mechanical aptitude/skills that is looking to get their foot in the door at a company with many growth opportunities. Day Shift: Monday through Friday, 7 a.m. to 3:30 p.m. This position is on-site (not remote/not hybrid) and not eligible for Visa sponsorship or transfer of Visa sponsorship. Requirements Position Requirements: Experience working with precision machined parts, assembly, cleaning, deburr, sanding, lapping, etc. Understanding of hardware installation, a plus Automotive experience a plus Experience in electromechanical assembly Clean room assembly experience Should be proficient at using both power and hand tools: Saws, Drills, Dremel, Torque Drivers, etc. Experience installing studs, standoffs & helicoils is a plus Ability to lift objects up to 50lbs Ability to stand for an extended period of time Ability to read and understand customer specifications, blueprints & drawings Preference will be given to candidates with prior machine shop experience Basic computer experience Valid driver's license The employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodations will be made to enable employees with disabilities to perform the essential functions of the job, absent undue hardship. The employer retains the right to change or assign other duties to this position. Personal Qualifications: Honest with Stellar Integrity Self-Starter / Self-Motivated / Self-Directed - Always striving to improve Reliable and Dependable Positive Attitude Enjoys fast pace and rapidly changing environment Professional Demeanor and Respectful to people in all situations Team Player - Flexible and willing to help others as needs and tasks change often Attention to detail Willing to flex hours as needed (i.e. short notice overtime) Good personal hygiene Compensation/Benefits: $17 to $21 per hour Paid time off/Holiday pay Medical/Dental/Vision Insurance Short- and long-term disability coverage 401(k) with matching funds Profit sharing eligibility Educational aid program availability Applicant must be able to pass a drug screen and criminal background check prior to employment. ITAR REQUIREMENTS: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Ascentec Engineering is an Equal Opportunity Employer; employment with Ascentec Engineering is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Salary Description $17 to $21 per hour DOE

Job DescriptionSalary: $21-23/hr Type of Position: Full-time, non-exempt Department: Production Reports To: Production Supervisor/Manager Direct Reports: N/A Schedule/Hours: Monday-Friday, 8:00 AM - 4:30 PM with change to 10-hour shifts (dictated by supervisor/manager, occasional nights and weekends as production schedule and supervisor/manager dictates) Overview of Lazarus 3D: Surgeon skill and experience are the biggest determinants of patient outcomes. Unfortunately, surgeons learn hands-on skills by operating on patients, and sometimes they make costly mistakes. Lazarus 3Ds Pre-Sure platform allows surgeons to rehearse every surgery ahead of time on a replica of their patient, created in hyper-realistic materials. This technology has the potential to transform patient safety and outcomes. Lazarus 3Ds Skill-Sure platform delivers world-class surgical training solutions to healthcare professionals, reducing the learning curve, aiding the development of innovative solutions, and is used by medical device companies for training, demonstration, and marketing. Pre-Sure and Skill-Sure models mimic the soft, realistic textures of real organs and provide a unique hands-on operative experience. Our mission is to help doctors operate with Confidence: Lazarus 3D is driven by a singular mission: to eliminate surgical errors. Our technology helps doctors operate with Confidence. Join us at Lazarus 3D as we define a new era of surgical precision and personalized care. Your Role at Lazarus 3D: As a Production Technician, you will be responsible for the hands-on creation of customized anatomical models, including both soft and hard components, used for surgical rehearsal and medical training. You will work with specialized tools and equipment, adhere to quality protocols, and maintain a clean and organized workspace. Your role will involve assembling parts, documenting processes, and collaborating with a dynamic team in a fast-paced environment to deliver high-quality products that support the mission of improving patient surgical outcomes. Additionally, you may be tasked to create and test a variety of materials and samples according to SOPs. This may include working with biological materials. Essential Job Functions: Support our vision and mission: To improve patient surgical outcomes. Proactively promote a positive workplace culture and demonstrate commitment to customer success. Comply with Lazarus 3Ds Quality System and follow all Standard Operating Procedures (SOPs) rigorously. Perform tasks assigned by supervisor/manager with accuracy, efficiency, and attention to detail. Embrace the company's core values in all aspects of work. Communicate clearly and effectively with team members to achieve operational goals. Assist in the setup and execution of production operations, ensuring workflow efficiency and organization. Assemble and fit custom anatomical models, incorporating both soft and hard components, as well as sub-assemblies and related units with precision. Work hands-on with tools such as calipers, general lab equipment, and 3D printing systems safely and effectively. Maintain cleanliness, safety, and compliance throughout all production processes, ensuring an organized and efficient work environment. Assist in the manufacture and evaluation of test articles for materials in development under established guidelines and supervision. Accurately document processes, measurements, and observations in real-time. Adapt to shifting priorities, demonstrate initiative, and apply problem-solving and creative thinking skills. Work collaboratively in a professional, respectful, and positive team environment. Participate in continuous improvement efforts and uphold productivity standards. Commit to delivering high-quality products and ensuring customer satisfaction. Qualifications and Critical Skills/Expertise: High School diploma with 4+ years of relevant experience, OR Associate's degree with 1+ year experience, OR Bachelor's degree in a related field. Hands-on experience with tools, lab equipment, or manufacturing environments; prior production or assembly experience is a plus. Proficiency with precision measurement tools (calipers, rulers), lab equipment, and/or 3D printers. Comfortable working in a fast-paced, dynamic environment with changing priorities. Strong verbal and written communication skills for documentation, reporting, and team collaboration. Ability to take initiative, troubleshoot, and seek clarification to ensure accuracy and quality. Ability to lift up to 40 pounds, and perform tasks such as bending, stooping, and standing or sitting for extended periods. Other Knowledge and Skills: Ability to interpret CAD drawings, technical diagrams, and assembly instructions. Knowledge of human anatomy and medical procedures is a plus. Knowledge of materials chemistry or materials science is a plus. Adaptable, eager to learn new technologies, tools, and methods. Strong organizational skills and a personal commitment to maintaining rigorous quality standards. Required Familiarity with the following Equipment: General lab equipment. 3D printing equipment (preferred). Calipers (preferred). Working Environment & Physical Requirements: Approximately 95% of responsibilities are performed in the lab, 5% in an office environment. While performing the duties of this job, the employee must regularly: Experience prolonged sitting, some bending, stooping, and occasional fast walking. Use hand-eye coordination and manual dexterity sufficient to operate hand tools. Occasionally lift and/or move up to 40 pounds. May have exposure to biologics and chemicals. Requires close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Lazarus 3D is an Equal Opportunity Employer; Employment with Lazarus 3D is governed based on merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Candidates must be US citizens/Permanent residents or be eligible to work in the United States.

Wax Assembler (Any Level) Prior Experience Required Varying Shifts! If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! We have multiple facilities in Albany, OR and are a world class supplier of titanium castings and components for the aerospace industry. If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! Primary Purpose: Wax Assembly consistently and accurately cleans wax molds in preparation for assembly. This position requires prior experience as a Wax Assembler. Duties and Responsibilities: * Cleans and assembles wax patterns to specifications using various tools. * Visually inspect wax patterns for defects. * Accurately code numbers on patterns for identification. * Recognize and understand the cause of defects in wax patterns. * Meet and maintain quality requirements. * Maintain work station and equipment in a clean, safe, and orderly manner. Minimum Qualifications and Experience: * Previous experience as a Wax Assembler required * Extensive repetitive motion of the hands, wrists and arms. * Able to use small, fine tools. * Good attendance record required. * Requires continuous mental and/or visual attention to detail. * Able to understand measurements and read and use a ruler correctly. * Able to work as a team player and be self-motivated. * Able to read, understand, and follow written and verbal instructions. * Compliance with general company attendance standard is required. * HS diploma or equivalent GED required, but candidates not meeting this requirement who possesses relevant experience will be considered. * Must be at least 18 years of age. * Solid job history including more than 1 year at previous or recent employer. * Must be willing to undergo a pre-employment background check. * Must be willing to participate in pre-employment and periodic drug screening. Work Conditions: * Position requires standing for long periods of time; approximately 80% of the shift. Chairs are available and used approximately 20% of the shift or less. * Exposure to fumes from melting wax. * Duties are performed in a temperature and humidity controlled environment. * May be exposed to dust, dirt, fumes, noise and chemicals. * Required to wear safety glasses in the performance of duties. Flexible Schedule Options: * Day Shift (Monday-Thursday 4x10) * Swing Shift (Monday-Thursday 4x10) $1.00/hour Shift Differential * Weekend Day Shift (Friday/Saturday/Sunday 3x12) $1.25/hour Shift Differential * Weekend Grave Shift (Friday/Saturday/Sunday 3x12) $2.50/hour Shift Differential Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large "function critical" products. CPP provides its customers with a "total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: *********************** CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. U.S. person status is required for this position in order to comply with the Arms Export Control and Export Administration Act. U.S. persons are U.S. citizens, legal permanent residents as defined by 8 U.S.C. 1101(a)(20) or protected individuals as defined by 8 U.S.C. 1324b(a)(3). This is a non-management position This is a full time position

We are seeking a dedicated Assembler to join our team. The role involves performing mechanical assembly of dental chair bases with precision and care. This position requires a strong understanding and experience with assembly processes, power tools, and the ability to handle heavy lifting. Responsibilities + Perform mechanical assembly of dental chair bases. + Use hand and power tools to assemble units according to blueprints and diagrams. + Lift and maneuver parts and assemblies weighing up to 30 lbs. + Work extensively with other team members to ensure quality and efficiency in the assembly process. Essential Skills + Proficiency in assembly tasks and using power tools. + Experience in handling heavy lifting. + Ability to read and interpret blueprints and diagrams. Additional Skills & Qualifications + Experience in construction or using power tools in an assembly environment. + Knowledge of precision measuring devices such as calipers and pin gauges. + Comfortable with print reading and computer use. Why Work Here? This position offers a great long-term opportunity with room for growth and development. Join a supportive team and gain valuable experience in a production environment. Work Environment The work environment is a production setting, where you will collaborate with two other assemblers. The role involves working with various tools and equipment, ensuring a dynamic and engaging workday. Job Type & Location This is a Contract to Hire position based out of Newberg, Oregon. **Pay and Benefits** The pay range for this position is $17.50 - $17.50/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Newberg, OR. **Pay and Benefits** The pay range for this position is $17.50 - $17.50/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Newberg,OR. **Application Deadline** This position is anticipated to close on Sep 19, 2025. **Pay and Benefits** The pay range for this position is $17.50 - $17.50/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Newberg,OR. **Job Type & Location** This is a Contract to Hire position based out of Newberg, OR. **Pay and Benefits** The pay range for this position is $17.50 - $17.50/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Newberg,OR. **Application Deadline** This position is anticipated to close on Dec 19, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Fabric Cutter A highly reputable and long-standing, local company with a World-Wide reach , who prides themselves on supporting life in the face of adverse conditions; And who is dedicated to building the toughest shelter and field support systems on the market, in order to provide safe and comfortable working environments for their customers around the globe, is seeking a Fabric Cutter to join their growing team! Need help applying? Call us at ************! Duties and Responsibilities for Fabric Cutter: Spreading, measuring, marking, and cutting fabric materials to supply to sewing team Assure that all products are cut to the highest standard of quality as determined by process documents and product specifications Inspect for flaws all in-process materials prior to cutting Operate all equipment and tools safely Regularly inspect, clean equipment, notify supervisor and/or facilities maintenance immediately of machines or equipment needing repair or maintenance, and take any damaged or worn tools out of service Skills and Qualifications for Fabric Cutter: Ability to lift/ move up to 50 pounds of material without assistance. Ability to lift over 50 pounds with assistance from others. Ability to bend and stand for long periods of time Job Details for Fabric Cutter: Work Schedule: Monday - Thursday 6:00AM - 4:30PM Pay Rate: $17.50/hour Benefits Upon Permanent Hire: - Medical, Dental and Vision Insurance - Flexible Spending Account (FSA) - Company paid Health Reimbursement Account (HRA) - 401(k) with generous company match upon eligibility - Company paid Basic Life and AD&D - Voluntary Life and AD&D - Short-Term & Long-Term Disability (STD) & (LTD) - Company Paid Employee Assistance Program (EAP) - Pet Insurance (coming soon - in 2025) - PTO - Monthly catered luncheons - Annual picnic and holiday parties - Ample Opportunities for career advancement #STEUG

Assembly Mechanic Astec - Eugene Airport Road is where welding careers grow. If you have a knack for safety, quality and team work, Astec is where you should be! *Astec is giving a $1500 sign on bonus! Astec is dedicated to a culture of Behavior Based SAFETY and a Healthy Environment! As a Mechanical Assembler you will: The Final Assembly Mechanic will need to be able to perform heavy duty mechanical, hydraulic, or electrical work involving primarily the assembling of heavy equipment. Will work with a high attention to safety processes and procedures, read and follow all blue prints, production procedures, and work orders to meet production standards and quality expectations. May need to coordinate work tasks with other departments, such as Engineering, and/or work units to improve work standards, quality and efficiency. Successful candidates should be capable of reading blueprints and deciphering blueprint symbols, Have experience with Diesel Engines, Electrical, and Hydraulic circuits and components, have a minimum of 3-5 years heavy equipment assembly experience with similar parts, processes, and production environment. EQUAL OPPORTUNITY STATEMENT As an Equal Opportunity Employer, Peterson Pacific Corporation does not discriminate on the basis of race, religion, color, sex, marital status, disability status, national origin or ancestry, veteran status, age, prior industrial injury, sexual orientation, genetic information, or any other protected status under local, state or federal law.

ENTEK is synonymous with some of the world's best lead-acid separators, lithium-ion separators, extruders, and engineering services for the battery and extrusion markets. We operate on six continents; astronomical growth for the simple lead-acid battery separator company James Young and Pete Johnson founded in Lebanon, OR in 1984. Our intimate knowledge of both the design and manufacturing of separators spurred the introduction of our high-speed co-rotating twin-screw E-Max extruder in 1998-recognized as the fastest to install and easiest to operate extruder on the market. In 2001, our first lithium-ion battery separator line expanded our reach in Asian markets, delivering a quality product at a market-leading price. Our success here is fueled by consistently living our core values of respect, integrity, commitment, and innovation. From state-of-the-art separators and extruders, to 360° engineering and support for all of it, ENTEK's commitment to non-stop innovation and attention to customer service keeps production lines humming. We are set up to make sure that a world at work has what it needs to stay at work, 24-7. SUMMARY Assembles machines, equipment, and their subassemblies following blueprints and other written and verbal specifications by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Travel for installation and service (in the US and abroad) as required to service customers. • Service and support for local customer base, as well. • Plans assembly procedures, following blueprints and schematic drawings and specifications. • Assembles equipment with bolts, welds, or other fastening devices to foundation or other structures. • Installs moving parts, such as shafts, levers, or bearings, and works them to test proper movement. • Bends and installs pipe for hydraulic systems. • Aligns and meshes gears in gearbox to assemble system of gears using alignment & measurement tools to insure proper assembly tolerances. • Performs welding and fabrication of pipe, structural, and tube construction. • Tests or assists in testing operation of completed product. SUPERVISORY RESPONSIBILITIES This job may occasionally require supervisory responsibility of Assembly Tech I or Assembly Tech II positions if required to complete a job. Qualifications EDUCATION and/or EXPERIENCE Trade school program certificate; or two to four years related experience and/or training; or equivalent combination of education and experience. CERTIFICATES, LICENSES, REGISTRATIONS, AND OTHER QUALIFICATIONS Must be able to travel. Position requires excellent verbal communication skills. Ability to work well with customers, other employees and supervisors. Additional Information Language skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization. Mathematical Skills: Ability to comprehend and apply principles of advanced algebra, trigonometry. Ability to work with concepts such as limits, engineering equations. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee is occasionally required to talk or hear. The employee must use proper lifting technique when required to lift and/or move objects. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The Maintenance Millwright work frequently requires work to be done above ground level, using ladders, lift platforms, scaffolding, catwalks, safety belts, etc. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essentials functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts, fumes or airborne particles, extreme heat, risk of electrical shock, and vibration. The employee is occasionally exposed to high, precarious places; toxic or caustic chemicals; and outside weather conditions. The noise level in the work environment is usually loud. This job description is not intended to be all inclusive and assignments may change as operations necessitate. We are an Equal Opportunity Employer. M/F/Disabled/Veteran

The Production Home Assembler follows work orders and instructions in order to accurately and efficiently prepare and assemble building components and homes in a factory assembly line environment. Essential Duties and responsibilities: Operate various hand tools, power tools and equipment used to complete carpentry duties including: Circular Saw Table Saw Router Pneumatic Nail Gun (roofing, framing and finish work) Drills And other tools needed for measuring, cutting, fastening, and drilling Frame, layout and build floors Prepare, layout and build walls Layout, run and install electrical lines, switches, receptacles and panels/breaker boxes Install and prepare dry for finish tape, mud and texture Complete roof construction, decking, flashing and shingling Cabinet and or finish carpentry and trim, build and installation Installation of siding, windows and doors Painting of interior and exterior of homes Cooperate and promote a team concept with all other company employees Adhere to all rules and regulations, at all times Meet or exceed company safety standards Perform other tasks as assigned by management Minimum Qualifications: Must be at least 18 years of age Must be legally authorized to work in the United States Be able to read, write, and speak English High School diploma, preferred Knowledge, Skills and Abilities: Ability to read a tape measure Possess basic construction knowledge and comfortable using basic tools Excellent attention to detail Ability to read blueprints, a plus Ability to work in a fast-paced environment and multi-task Ability to trouble shoot and problem solve in a high-volume Versatility and willingness to transfer into various departments when necessary You must be able to communicate efficiently and clearly with other Team Members Working conditions: Continuous exposure to heat, cold, noise, and working outdoors. Must wear protective equipment while at the location Physical requirements: Requires walking, sitting, lifting, pushing, pulling and climbing to a significant degree Heavy Work-Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds or force frequently, and/or up to 10 pounds of force constantly to move objects While performing the duties of this job, the employee is regularly required to talk and hear, in order to communicate to employees as well as function safely around construction equipment Disclaimer: “This is intended to provide general information about the position. It is not an employment contract. As with all positions, the responsibilities and duties of this position may change. The company, in its discretion, may alter this job description at any time with or without notice.” EEO/AA Statement: Cavco Industries Inc., and all of its Subsidiaries are an EEO/AA (equal opportunity/affirmative action) institution and does not discriminate on the basis of sex, age, race, color, religion, physical or mental disability, creed, national origin, veteran status, sexual orientation, genetic information, gender identity, or gender expression in the programs or activities which it operates.

Job Title: Mechanical Installer/Assembler Job Type: Full-Time About Us At Marathon Coach, Inc., it is our people who make the difference. Our team works together to turn a Prevost bus chassis into a one-of-a-kind luxury motorcoach. As part of our team, you will work alongside experienced craftspeople, in a friendly hands-on environment. We have our Manufacturing, Service and Sales team in Coburg, Oregon, with Service and Sales locations in Florida and Texas. Marathon is a thriving manufacturing company, currently experiencing growth. As a result, we are expanding our team and looking for skilled and motivated individuals. What We Offer Health, dental, and vision insurance Short Term Disability Life Insurance 401-K with employer match Paid Vacation Paid Sick Leave 7 Paid Holiday's per year Employee Referral Bonus Program On site Human Resources support What You Will Do -Prepare chassis for production work and installation of mechanical systems -Install various mechanical systems, including: -Generators -Air Systems -Exhaust Systems -Heating Systems -Leveling Systems -A/C Components -Furniture -Seating -Follow safety protocols -All other duties as assigned What's Your Shift This opportunity is Monday - Friday and has two shifts: -7:00 a.m. - 3:45 p.m. -6:00 a.m. - 2:45 p.m. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands or fingers to touch, handle, or feel; reach with hands and arms. The employee frequently is required to stand and walk. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, occasionally lift and/or move up to 50 pounds, and occasionally lift/or move up to 80 pounds with assistance. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. Work Environment While performing the duties of this job, the employee is regularly exposed to fumes and airborne particles. Exposure to a production environment which includes noise, moving machinery, mechanical parts, and forklifts. Personal Protective Equipment is provided. Marathon Coach, Inc. is an equal opportunity employer. Wage: $17.00 - $19.00 per hour

The Mechanical Technician is responsible for diagnosing and repairing mechanical and electrical damage of vehicles while ensuring safety and quality to ensure timely delivery of repaired vehicles. Additional responsibilities include performing light-heavy maintenance and service work. DUTIES / RESPONSIBILITIES * Analyze and evaluate damaged vehicles to determine repair or service needs and replacement of parts. * Accurately estimate costs for repairs, maintenance and service required. * Perform advanced, basic and minor repairs as required - brake and hydraulic, exhaust, engine and transmission, fuel ignition, electrical, suspension and alignment, restraints and airbags, air conditioning and computer systems. * Perform service and repairs following manufacturers' manuals. * Document all repair/service information in CARSTAR's management system. * Inspects and tests all mechanical repairs to meet manufacturers' specifications. Road tests vehicles when required. * Communicate with production team to keep all vehicles on schedule for on-time delivery. * Ensure work area is kept clean, maintain all tools/equipment, follow safety/OSHA guidelines and handle and dispose of hazardous waste properly. * Continuously learn new technical information and techniques in order to stay abreast with rapidly changing automotive repair technology. * Attend daily release meetings. * Other duties as assigned. EXPERIENCE / SKILL REQUIREMENTS * 2-5 years of automobile automotive mechanical/electrical diagnosis, problem-solving and repair experience in related industry required. * High School diploma/GED required, auto mechanic tech graduate preferred. * ASE certification or equivalent required. I-CAR training preferred. * Experience diagnosing problems - mechanical, repairing, rebuilding and overhauling mechanical, electrical, electronic and/or hydraulic systems in a wide variety of automotive vehicle, including hybrid vehicles. * Knowledge using manufacturers' service and repair manuals. * Highly organized, able to prioritize multiple concurrent assignments. * Ability to receive direction and work well with others. * Valid driver's license and insurable driving record. PHYSICAL REQUIREMENTS * Essential physical requirements include: * Ability to stoop, bend and kneel, squat, kneel and pulling * Extended periods of kneeling, bending, squatting and stooping * Carry and lift heavy objects (up to 50lbs) * Standing, sitting and walking * Performing repetitive motions WORK ENVIRONMENT * Exposure to: * Paint, fumes and particles * Dirt / Dust * Chemicals / Toxins * Varying heat / cold * Intermittent noise * All duties, responsibilities and experience are subject to change by location

Job DescriptionDescription:Lexus Technician / Mechanic- Rare OpeningSome advantages of working at Kendall Lexus of Eugene are: State of the Art new facility Career development opportunities Paid training to maintain Lexus certification Relocation possible for the right candidate Competitive wages for flat rate technicians Annual technician seniority and efficiency bonus program Loyal customer base Experienced service advisors Engaged management team Clean and safe shop Employee discounts on parts, service, and vehicle purchases Medical, Dental, and Vision insurance Paid Life insurance 3 weeks of PTO granted for Master Certified Technicians Competitive Paid Time Off including Paid Sick Leave 401(k) plan with Fidelity Accident and Illness supplemental plans Participating dealer in the Lexus employee-vehicle program No evenings or weekends Elite of Lexus Dealer Lexus Main Line Technician: We are seeking an experienced Lexus/Toyota technician with current ASE certifications. Job duties will include inspecting, diagnosing, and completing needed maintenance and repairs on Lexus and non-Lexus vehicles. Candidates should be comfortable learning and using a variety of computer systems and diagnostic tools. Candidates must be able to effectively communicate with teammates, have clear documentation, and a strong commitment to meet Lexus quality standards. Must have a valid driver license and clean driving record. Work is performed indoors in a shop environment, tool usage includes mechanic's hand and power tools that produce significant vibration and force, standing and walking will be required for entire work shift to complete job duties. Pushing, pulling, crouching, squatting, reaching, and kneeling will be required frequently to access all parts of vehicles being worked on. Lifting as well as pushing and pulling weights and forces from 20 to 100 pounds occasionally required. Join Kendall Auto Group and START SOMETHING GREAT! We are a family-owned and operated company with auto dealerships in Idaho, Oregon, Montana, Washington and Alaska. Kendall has been selling and servicing vehicles since 1937. Our mission at Kendall is simple: To deliver an unrivaled customer experience. Through our highly motivated, knowledgeable and caring team of professionals, we pledge to listen to and respect your needs. Doing the right thing means more than selling and servicing vehicles. Our progressive attitude means being exceptional stewards of the communities we operate in. It means going above and beyond every day for the people who mean so much to us - our employees and customers. Our employees are members of the Kendall family, who share our same goals and passions. Ideal candidates are confident, driven people who are excited to grow and succeed with one of the most successful automotive dealerships in the Pacific Northwest. If you are looking for a rewarding career, we would like to meet you and start something great! Requirements:

Be visionary Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. Job Description About Teledyne FLIR Defense Join Teledyne FLIR Defense, where we're dedicated to safeguarding lives with cutting-edge sensing and threat detection technologies. Our arsenal includes advanced surveillance sensors, handheld devices, unmanned vehicles, lasers, and more solutions that increase operational effectiveness for warfighters, first responders, and search-and-rescue teams. We're looking for passionate innovators eager to shape the future of the Defense industry. If you're mission-driven to globally collaborate on life-saving solutions, we invite you to explore our current opportunities. #TeledyneFLIRDefenseJobs Job Summary: Under general supervision, can complete duties that may include assembly of precision components or subsystems having both opto-mechanical and electro-optical assemblies. Perform test and verification procedures for complex opto-mechanical and electro-optical components and subassemblies using defined production procedures. Primary Duties & Responsibilities: Interpreting drawings, training manuals, and instructions in order to perform duties Assembling, installing, repairing, troubleshooting, and maintaining electronic components and systems Performs complex bonding and curing procedures Operates test equipment, instruments, and automated test documentation Inspects and verifies that work is complete and correct Performs other related duties as assigned Job Qualifications: High school diploma or Equivalent A.S. preferred Ability to lift up to 50 lbs. for short durations Demonstrated ability to learn on the job 1 to 2 years' experience in related technical field Preferred Optic Assembly experience Meticulous attention to detail Applicants must be either a U.S. citizen, U.S. national, legal permanent resident, asylee, refugee or must be eligible to apply for and obtain the appropriate export control license from the U.S. Departments of State or Commerce. #FLIR Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws.

**Be visionary** Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. **Job Description** **About Teledyne FLIR Defense** Join Teledyne FLIR Defense, where we're dedicated to safeguarding lives with cutting-edge sensing and threat detection technologies. Our arsenal includes advanced surveillance sensors, handheld devices, unmanned vehicles, lasers, and more solutions that increase operational effectiveness for warfighters, first responders, and search-and-rescue teams. We're looking for passionate innovators eager to shape the future of the Defense industry. If you're mission-driven to globally collaborate on life-saving solutions, we invite you to explore our current opportunities. \#TeledyneFLIRDefenseJobs **Job Summary:** Under general supervision, can complete duties that may include assembly of precision components or subsystems having both opto-mechanical and electro-optical assemblies. Perform test and verification procedures for complex opto-mechanical and electro-optical components and subassemblies using defined production procedures. **Primary Duties & Responsibilities:** + Interpreting drawings, training manuals, and instructions in order to perform duties + Assembling, installing, repairing, troubleshooting, and maintaining electronic components and systems + Performs complex bonding and curing procedures + Operates test equipment, instruments, and automated test documentation + Inspects and verifies that work is complete and correct + Performs other related duties as assigned **Job Qualifications:** + High school diploma or Equivalent + A.S. preferred + Ability to lift up to 50 lbs. for short durations + Demonstrated ability to learn on the job + 1 to 2 years' experience in related technical field + Preferred Optic Assembly experience + Meticulous attention to detail Applicants must be either a U.S. citizen, U.S. national, legal permanent resident, asylee, refugee or must be eligible to apply for and obtain the appropriate export control license from the U.S. Departments of State or Commerce. \#FLIR Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws. You may not realize it, but Teledyne enables many of the products and services you use every day **.** Teledyne provides enabling technologies to sense, transmit and analyze information for industrial growth markets, including aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, energy, medical imaging and pharmaceutical research.

Join Reynolds Consumer Products…and Drive Your Career across a world of opportunities! We provide amazing job opportunities for growth with competitive salaries and benefits in an exciting, dynamic, fast-paced, and high-performance organization. If you are looking to build a strong career, we have an opportunity for you! We are searching for an Engineering Technician to join our team in Albany, OR. Responsibilities Your Role: The Engineering Technician will perform electrical and mechanical modifications on existing production, packaging, and material handling equipment. This role will assist with trials on new resin processes per Manufacturing Engineering department requests. You will have the opportunity to Make Great Things Happen! Supply technical assistance to the facility to maintain and improve overall operational efficiency. Responsible for complex operations and duties in production. Track equipment performance and adjust setups, calibrations, and alignments. Confer with other specialists when serious problems occur. Track data associated with production equipment. Suggest revisions for methods of operation, material handling, or equipment layout. Interpret engineering drawings, schematic diagrams, and formulas. Confer with management or engineering staff to determine quality and reliability standards. Recommend changes to production standards for achieving the best quality within the limits of equipment capacity. Report any inconsistencies and use standard repair procedures. Responsible for solving problems requiring more extensive knowledge and experience. Ultimately, you will be a vital team member and will help us ensure that we are continuously improving and innovating in a safe and efficient environment. You will love it here if… You put safety first, always. You listen, learn, and evolve. You are passionate about collaboration, teamwork, and achieving shared goals. You treat all people with respect, operating ethically, and embrace inclusivity. You are committed to improving our impact on local communities. Qualifications We need you to have: High School diploma or equivalent. 4+ years of experience in Manufacturing. Strong troubleshooting skills. Proficient in computer applications including MS Office. Possess good communication and interpersonal skills. Must be self-motivated, proactive, and able to work effectively with minimal supervision. Willingness to work flexible hours. High level of attention to detail. Critical thinking and analytical skills. Communication skills, both written and verbal. Icing on the cake: AAS or trade school diploma in mechanical or electrical Engineering. If you answer yes to the following…we want to meet you! Intellectual Curiosity: Do you have an inquisitive nature? Problem Solving: Do you have a knack for tackling issues head-on? Entrepreneurship: Do you enjoy taking ownership of your work? Customer Centricity: Do you always act in the best interests of the customer, putting their needs first? Growth Mindset: Do you focus on progress rather than perfection? Continuous Improvement: Are you never satisfied with the status quo? Want to know more? Check out our website or connect with us on LinkedIn! Apply today to join a fast-growing innovative company! Not a good fit but know someone who is? Please refer them! Local candidates only, no relocation assistance available Join Reynolds Consumer Products and Drive Your Career across a world of opportunities! For applicants or employees who are disabled or require a reasonable accommodation for any part of the application or hiring process, you may request assistance by emailing us at ******************************. No recruiter calls or emails please. RCP affords equal employment opportunities to applicants without regard to race, color, religion, age, disability status, sex, marital status, protected veteran status, pregnancy, national origin, genetics, genetic information, parental status, or any other characteristic protected by federal, state or local law. RCP conforms to the spirit as well as to the letter of all applicable laws and regulations. Posted Salary Range USD $70,000.00 - USD $75,000.00 /A

Looking for a rewarding career with a company that values people, growth, sustainability, and teamwork? Join our Duraflake team as a Production Technician! This role is on a 12-hour shift schedule, either fixed day or night shifts, with night shifts required as needed. What we are looking for: High school diploma or equivalent Must be 18 years or older Able to lift up to 50 pounds Must be willing and able to be certified to safely operate a forklift or other mobile equipment in a fast-paced environment. Must be able to work in a variety of environments including but not limited to: dusty (wood dust), hot, cold, or wet. Manufacturing experience preferred Post offer, you must be able to pass a drug screen, background check, and physical capability assessment. What we offer: The entry-level wage is $21.22 an hour, with an increase to $24.09 after completion of your 6 months probationary period and successful completion of your onboarding training plan. Plus, an additional $2.00 per hour for any employees on our night shift! Health plans with options that meet your needs, including a wellness program, gym reimbursement, and additional benefits such as pet insurance, legal insurance, employer-paid and voluntary life insurance, and more Paid maternity and paternity leave, a competitive vacation package, and company and floating holidays designed to support your work-life balance Retirement planning options, including generous employer contributions Opportunities to learn and develop, including a tuition reimbursement program In this role, you would: Respond to upset conditions and work closely with any and all team members to address problems Communicate with team members about production line activities, any upset conditions experienced, and follow up on the resolution Properly complete product changes and productively operate the equipment Create maintenance requests for equipment problems in a timely manner and follow-up as needed to ensure work is completed Actively participate in any problem-solving meetings and contribute to improving processes12- Complete paperwork and electronic entries as necessary Physical Requirements: Ability to move freely throughout the facility, including climbing stairs and ladders, and navigating around equipment and machinery. Ability to bend, stoop, and crouch as necessary to inspect and maintain equipment. Capability to lift and carry materials and equipment weighing up to 50 pounds. Ability to perform physical tasks that involve lifting, pushing, pulling, and carrying heavy objects. Endurance to stand and walk for extended periods, often in environments with dust, chemicals, high noise levels and varying temperatures About Us: At ARAUCO, we're more than a global leader in sustainable wood products-we're a team driven by innovation, environmental stewardship, and strong core values. Committed to responsible forestry and quality craftsmanship, we create products that shape industries and protect the planet. Sustainability is central to everything we do-from responsible forestry to reducing environmental impact, we are dedicated to preserving natural resources for future generations. Grow your career with purpose and help us shape a better future-one product, one idea, and one team at a time. ------ Arauco is committed to creating an inclusive culture across the organization. Arauco is an equal opportunity employer to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. Additionally, we demonstrate that commitment by preventing and removing barriers for persons with disabilities. Where it is not possible to remove barriers, Arauco will make efforts to accommodate persons with disabilities in a timely, effective and suitable manner. If you require any accommodations during the recruitment process, please let us know.

Job Title: Entry Level Wood Production Assembler - Urgently Hiring! Pay: $15.05/hour Hours: Monday - Friday, 7:00AM - 4:00PM The Entry Level Wood Production Assembler will play an essential role in the hands on processing of wood products. The ideal candidate will maintain an organized and safe environment while actively contributing to the efficient assembly of wood products. This is a great opportunity to be a part of a large and local manufacturing facility and further your career in this industry, located in Springfield, Oregon. As a Entry Level Wood Production Assembler , you will be responsible for: Use Power/Hand tools to assemble chairs, tables, and equipment Use hand sanders to finish products Packing parts into boxes Assembly of upholstery onto pre-assembled tables/chairs The ideal candidate for this role will have: Must be able to stand entire shift Must be able to bend, twist, stoop and kneel Must be able to lift 30-50 lbs. consistently Benefits: Ask us about our Referral Bonus Program to earn extra cash! Ready to take the next step? Apply now for this Entry Level Wood Production Assembler role in Springfield-or contact us to learn more! #STEUG

ENTEK is synonymous with some of the world's best lead-acid separators, lithium-ion separators, extruders, and engineering services for the battery and extrusion markets. We operate on six continents; astronomical growth for the simple lead-acid battery separator company James Young and Pete Johnson founded in Lebanon, OR in 1984.. Our intimate knowledge of both the design and manufacturing of separators spurred the introduction of our high-speed co-rotating twin-screw E-Max extruder in 1998-recognized as the fastest to install and easiest to operate extruder on the market. In 2001, our first lithium-ion battery separator line expanded our reach in Asian markets, delivering a quality product at a market-leading price. Our success here is fueled by consistently living our core values of respect, integrity, commitment, and innovation. From state-of-the-art separators and extruders, to 360° engineering and support for all of it, ENTEK's commitment to non-stop innovation and attention to customer service keeps production lines humming. We are set up to make sure that a world at work has what it needs to stay at work, 24-7. Job Description ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Travel for installation and service (in the US and abroad) as required to service customers. Service and support for local customer base, as well. Plans assembly procedures, following blueprints and schematic drawings and specifications. Assembles equipment with bolts, welds, or other fastening devices to foundation or other structures. Installs moving parts, such as shafts, levers, or bearings, and works them to test proper movement. Bends and installs pipe for hydraulic systems. Aligns and meshes gears in gearbox to assemble system of gears using alignment & measurement tools to insure proper assembly tolerances. Performs welding and fabrication of pipe, structural, and tube construction. Tests or assists in testing operation of completed product. SUPERVISORY RESPONSIBILITIES This job may occasionally require supervisory responsibility of Assembly Tech I or Assembly Tech II positions if required to complete a job. Qualifications EDUCATION and/or EXPERIENCE Trade school program certificate; or two to four years related experience and/or training; or equivalent combination of education and experience. Additional Information Language skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization. Mathematical Skills: Ability to comprehend and apply principles of advanced algebra, trigonometry. Ability to work with concepts such as limits, engineering equations. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms. The employee is occasionally required to talk or hear. We are an Equal Opportunity Employer. M/F/Disabled/Veteran