Assembly technician jobs in Clarkstown, NY

The Role As a Production Tech, you'll be an essential part of the process of turning raw cannabis flower into our beautiful line of medicated products. Under the guidance of the management team, you will produce, package, and handle products, perform inventory duties, adhere to compliance requirements, and keep safety as your top priority while working daily in our facility. Here at GTI, we are looking for true team players who are the perfect hybrid between precision and energy. Responsibilities Deliver on production goals, while focused on safety and quality Produce product per recipes and SOP's, maintaining high quality standards Package product into proper containers with proper labeling to ensure compliance with state regulations Ensure all standards for processing procedures and laboratory protocols are followed Compliance with local and state regulations Adherence to quality control methods throughout entire process Documentation of manufacturing methods are created and maintained Electronically convert packaged products in the state traceability system Manage time efficiently to meet goals while consistently producing quality product Practice good housekeeping habits throughout the facility with focus and personal contributions towards a clean and organized assigned work area at the end of the assigned shift Exhibit competency in basic organizational skills, communication skills and Windows based operating software Use independent judgment regarding product processing, keeping quality and goals in mind Help create a positive environment by having a positive attitude and by being self-motivated Other duties as assigned Qualifications High School Education or GED graduate; some college or college graduate preferred 1-2 years' experience in manufacturing, food processing, warehousing, and/or inventory preferred Equivalent combinations of education and experience may be considered Must be able to work well in a group and independently; demonstrate self-motivation and initiative Must be able to adapt quickly to changes in policy, procedure, and technique Employee must exhibit personal hygiene and follow the health guidelines set forth by GTI Ability to listen well and communicate effectively with various audiences Ability to perform monotonous tasks with great efficiency without losing qualities Must be able to follow basic instructions and accept constructive criticism Prior cannabis experience not required Additional Requirements Must have a valid driver's license or State ID card Must be a minimum of 21 years of age Must pass all required background checks Must be and remain compliant with all legal and company regulations for working in the industry Must be approved by the Cannabis Compliance Board to receive an Agent Card Working Conditions While performing the duties of this job, the employee is regularly required to perform reaching, grasping, bending, stooping, talking, hearing, seeing and repetitive motions. Must be able to sit and/or stand for extended periods of time while maintaining focus. PHYSICAL DEMANDS: Must be able to lift, carry, and balance up to 50 pounds AND must be able to do so with extreme care and caution when working with product. Work involves daily exposure to allergens (such as cannabis, tree nuts, and coconut oil). The pay range is competitive and based on experience, qualifications, and/or location of the role. Positions may be eligible for a discretionary annual incentive program driven by organization and individual performance. Green Thumb Pay Range$19.50-$20 USD

WHAT YOU DO AT AMD CHANGES EVERYTHING At AMD, our mission is to build great products that accelerate next-generation computing experiences-from AI and data centers, to PCs, gaming and embedded systems. Grounded in a culture of innovation and collaboration, we believe real progress comes from bold ideas, human ingenuity and a shared passion to create something extraordinary. When you join AMD, you'll discover the real differentiator is our culture. We push the limits of innovation to solve the world's most important challenges-striving for execution excellence, while being direct, humble, collaborative, and inclusive of diverse perspectives. Join us as we shape the future of AI and beyond. Together, we advance your career. THE ROLE: AMD's Data Center Platform Engineering Group {DPEG} is designing, building and delivering innovative technology infrastructure enabling the digital world. We create cloud-enabling server solutions that help the world's leading companies turn their ideas into reality. Our customers are future-focused and so are we, always a step ahead of the next challenge. As experts in engineering, manufacturing, and supply chain, we're the bridge between problem and solution for the world's leading cloud and telecom providers. Our customers depend on us to solve their most complex server design needs. Come and join our Data Center Platform Engineering Group where we are building amazing, powered products with amazing people. This is an exciting role in which you will have great exposure to the latest technologies in the industry. In this role, you will be working as a member of the system development team. The position will handle multiple projects simultaneously, maintain project schedules/deadlines. Assist engineering projects by assembling, testing, refining prototypes, and evaluating new electronic components. You will be working closely with multiple engineering organizations. THE PERSON: If you are passionate about finding and resolving issues and thrive in fast-paced, technically challenging environments where you work on various problems, and exposure to the latest technology this could be the perfect opportunity. This position requires a theoretical knowledge of engineering, specifically electronic and electrical engineering, as well being heavily involved with hands-on. The position will utilize tools and technologies including electronic and computer hardware, architecture, and components; soldering tools for circuit boards and electronics; Linux and widows-based diagnostic/test programs to benchmark electronic component performance. KEY RESPONSIBILITIES: * Build, debug, test, repair, and upgrade computer prototypes (computers, servers, peripherals, programs, and software/firmware). * Proficient in hand soldering. * Assist engineers in the evaluation, design, and test of new electronic components. * Document prototype construction and maintain pertinent engineering records. * Write procedures and various technical documents. * Perform Lab Management responsibilities to maintain and organize a clean and efficient lab. * Materials management to inventory/track/ship materials. * Utilize analytical thinking and problem-solving skills to perform the above. PREFERRED QUALIFICATIONS: * Experienced in engineering test, debugging, tech support, or relevant experience. Experience within a computer hardware environment preferred. * Fundamental understanding of computer architecture and components (CPU, power supply, memory, graphics cards, flash memory, etc.) * Strong demonstrated soldering skills. Knowledge of circuit boards, soldering, and electronics * Ability to diagnose the root cause of computer system failure and isolate the components/failure nodes * Ability to use custom Linux and Windows-based diagnostic/test programs to run benchmarks/tests on electronic components' performance * Understanding of hardware and software interactions; able to apply this understanding to resolve issues * Excellent verbal and written communication skills * Strong interpersonal skills and the ability to interact with people at various levels in the organization * Analytical thinking and problem-solving ability; use rigorous logic to solve problems * Understands and uses speed as a competitive advantage; completes tasks on time * Lab Management and Organizing skill for maintaining clean and efficient labs. ACADEMIC CREDENTIALS: Associate's degree (or above) in Electronics, Certificate of Completion of Technical School, or equivalent combination of education and/or experience preferred This role is not eligible for Visa sponsorship. #LI-CB1 Benefits offered are described: AMD benefits at a glance. AMD does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services. AMD and its subsidiaries are equal opportunity, inclusive employers and will consider all applicants without regard to age, ancestry, color, marital status, medical condition, mental or physical disability, national origin, race, religion, political and/or third-party affiliation, sex, pregnancy, sexual orientation, gender identity, military or veteran status, or any other characteristic protected by law. We encourage applications from all qualified candidates and will accommodate applicants' needs under the respective laws throughout all stages of the recruitment and selection process.

Job DescriptionIs this you? Do you like transforming a drawing into a finished, tested assembly? Are Heli-Coils, torque specs, and fit checks second nature? If so, you'll thrive in our Assembly & Test Department on Daniel Road, where you'll own final assembly, finishing, and test readiness for customer products. Role overview In this position, you'll build mechanical chambers and related assemblies to exact specifications and prints, ensuring every unit meets our quality standards before release. Core responsibilities Prepare and service threaded features by installing and removing Heli-Coils per requirement. Align, fit, and assemble components to create chambers and other final assemblies for test. Troubleshoot assembly problems and implement solutions. Carry out final cleaning/finishing steps to customer procedures. Conduct in-process checks for compliance; identify and report any damage promptly. Verify completion of all assembly, finishing, and test prerequisites prior to sign-off. Partner with engineering, production, and quality to ensure customer expectations are achieved. Background and qualifications High school diploma or GED. Hands-on mechanical experience (automotive, small engines, or bodywork). 3-5 years in mechanical assembly preferred. Capability to read and interpret engineering drawings/specifications and translate them into product and quality criteria. Ability to read, write, and speak English fluently. Competencies Language: Read and interpret technical procedures, professional journals, business periodicals, and regulations; author reports, correspondence, and procedures; present information and address questions from leadership, clients, customers, and the public. Mathematics: Apply probability/statistical concepts, plane and solid geometry, and basic trigonometry; use fractions, percentages, ratios, and proportions in real tasks. Reasoning: Define problems, gather data, establish facts, and draw valid conclusions; interpret diverse instructions (written, oral, diagram, schedule) and handle abstract and concrete variables. What you must have Foundational mechanical skills. Proficiency with hand tools. Basic ability to read blueprints. Dependable, accountable, and self-driven. Legal and work conditions Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Physical demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to reach with hands and arms; and talk or hear. The employee is regularly required to stand; walk; sit; and use hands or fingers, handle or feel. The employee is frequently required to stand and work, lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception, color vision and the ability to adjust focus. Work environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate and sometimes loud.

Job Description Electro-Mechanical Assembler 1st Shift Mon-Fri 7 am-3:30 pm (OT - 6 am - 3:30 pm) Effective w/e 11/25/2023, all new starts for Boonton will have a 30% increase to their base pay to cover the client\'s compensation package. Please inform the contractor that they will lose their 30% increase at conversion but will gain their benefits, including PTO and Holiday pay. This is due to the new law passed in NJ. Position Summary: Responsible for complex and diversified assembly of a variety of products in which mechanical drawings or work instructions are provided. Intricate fitting, adjusting, and aligning of a considerable number of parts (involving close tolerances and interrelated factors) are required to complete products, units, or sub-assemblies. Hand tools and usage of machines will be required to perform the assembly. Follows schedule provided by SAP and management. Position Responsibilities: Assembles and/or wires complex equipment following blueprints, models, and model prints. Skilled adjusting, fitting, and aligning are required within close tolerances. Follows work cell procedures or mechanical drawings and product structures. Sets up, operates, and maintains basic production machines such as component engravers, presses, crimpers, riveting or encapsulation machines. Is flexible and able to perform many operations on product in and outside of home department. Uses hand and power tools as required. Builds harness assemblies. Light usage of computers to monitor and report job status and component availability. Will need to be able to open prints or work instructions from system and write to excel or SAP databases. May perform thru-hole PCB assembly. Performs related duties as assigned by Supervisor. Works overtime as required. Strives to meet prescribed quality standards in an ISO environment. Follows proper use of PPEs to promote a safe work environment and performs 5S steps to ensure clean, hazard-free, and efficient work area. Skills and Experience Required: Minimum of 1-3 years electro-mechanical assembly experience. Mechanical assembly with electronic/electrical safety knowledge is acceptable. Ability to read blueprints and schematics; read and identify proper components and color schemes. Must present excellent workmanship standards. Must have good verbal communication skills.

Job Title: Production Technician Department: Production Reports to: Production Value Stream Supervisor DreamFields is one of the top 5 cannabis companies in the industry through our leading #1 pre-roll brand, Jeeter. The company is very passionate about producing world-class marketing, high quality, innovative products, delivering unprecedented customer experiences, having cutting-edge operations, and curating an amazing company culture & thriving work environment. With over 1500+ employees we are proud to be one of the most loved employers in the industry. The company continues to experience exponential month-over-month growth as one of the fastest-growing companies in the cannabis industry and we have begun our aggressive national expansion to all the legalized cannabis states in the USA. Job Summary: Cannabis Production Technicians are directly involved in manufacturing our products from the initial stages to final sale-ready units that will be distributed to dispensaries throughout the state and ultimately into the hands of our customers who enjoy our top-of-the-line branded products. Duties/Responsibilities: Manipulating flower and oil. Weighing, stuffing, and rolling products. Labeling, stickering, and packaging finished goods. Required to hit specific cycle times in each position. Required to work in a high-volume manual production assembly line and achieve both individual and team performance goals. Required Skills/Abilities: Must be at least 21 years old, as required by state law. Ability to work well with others and independently. Ability to learn and adapt to various strains, styles, and types of cannabis. Ability to manage time in a fast-paced environment to meet goals without sacrificing quality. Ability to maintain a high standard of health and hygiene as required by OSHA. Ability to follow instructions and be receptive to feedback/coaching from the management team to maintain product quality. Education and Experience: HS Diploma or GED required. 1+ years of experience in a production or manufacturing position. 1+ years of experience in manufacturing consumable goods is preferred. Must have working knowledge of GMP (Good Manufacturing Practices). Physical Requirements: Must be physically capable of standing or sitting for long periods. Must be able to lift up to 40 lbs. Must have full use of arms and fingers for fine manipulation of cannabis. Must be capable of repetitive motions using hands and arms while working with cannabis. Must be willing and able to wear all mandatory Personal Protective Equipment provide. Work Schedule: Your regular schedule will be Monday through Friday. From time to time, you may be scheduled to work on Saturdays; some of these shifts will be mandatory while others may be voluntary. Please be aware that staffing requirements and operational demands may result in adjustments to your scheduled start and end times, workdays, and total weekly hours. Whenever possible, advance notice of schedule changes will be provided. EEOC: DreamFields is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. All candidates must be willing to submit to a background check to be considered for the position.

Manufacturing Assembly in Fairfield, NJ Pay: $17/hr. Schedule: Mon-Fri 6am-2:30pm Benefits, and Weekly Pay iBoost Talent is hiring for an Assembly / Manufacturing Associate located in Fairfield, NJ. Our positions are full-time, year-around employment with paid training. Pay $17.00 per hour Schedule 1st Shift; Mon-Fri 6am-2:30pm with occasional overtime Position Overview: This position is responsible for performing light assembly, machining, or packaging of manufactured products while maintaining the specified the quality, efficiency, and inventory control requirements. Work assignments will be scheduled based on training proficiency. depending on the tasks assigned for the day, you may have to sit or stand more or less frequently. Typical assembly work is repetitive in nature. Steel-toed shoes are required for working in this position. Regular production/warehouse environment (no air conditioning). Key responsibilities include: Understanding and executing verbal instructions related to your duties. Inspecting work to ensure quality and accuracy. Transporting completed products to designated locations using proper material handling methods. Monitoring and replenishing raw materials as needed for operations. Completing all required documentation and electronic data updates. Preparing and packaging units for shipment. Assisting with various duties across departments as necessary. Maintaining a clean workstation in accordance with 5S procedures. Achieving or exceeding pre-established performance objectives. Upholding our core values: Integrity, Customer Responsiveness, Innovation, Passionate Contribution & Empowerment, and Continuous Improvement. Identifying and reporting workplace hazards while participating in safety programs and initiatives. Job Requirements: Fluency in reading, writing, and speaking English. Basic mechanical, math, and problem-solving skills. Proficiency in operating equipment such as basic machining posts, saws, paint sprayers, and hoists. Ability to read and interpret assembly drawings, blueprints, BOMs, and associated procedures. Competence in using measurement tools like tape measures, micrometers, and calipers. Familiarity with basic hand tools (hand drills, screwdrivers, hammers, etc.). Flexibility to adapt to changing priorities and tasks. Strong teamwork skills and the ability to follow directions. Proven reliability in attendance and punctuality. Understanding of basic lean principles (5S, Kanban). Preferred Qualifications: High School diploma or GED. Previous manufacturing experience is a plus. Working Conditions/Physical Demands: This position requires standing for 8 hours a day, with coordinated hand and finger movements for grasping, manipulating, and assembling objects. You will frequently use vibrating/pneumatic tools and may need to reach overhead, bend, twist, stoop, kneel, or squat. The role involves lifting and carrying up to 40 lbs regularly. Depending on the tasks assigned for the day, you may have to sit or stand more or less frequently. Typical assembly work is repetitive in nature. Steel-toed shoes are required for working in this position. Regular production/warehouse environment (no air conditioning). Note: Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. iBoost Talent is proud to be an Equal Opportunity Employer. You will be considered for this position based upon your experience and education, without regard to race, color, religion, age, sex, national origin, sexual orientation, ancestry; marital, disabled or veteran status. We are committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment. EOE Thank you for your interest in iBoost Talent, we are proud to be an Equal Employment Opportunity Employer and participate in the E-Verify eligibility confirmation program.

COMPANY CULTURE Our focus is to deliver world-class solutions to our customers, on time and of the highest quality as the preferred supplier of highly engineered, energetic, and pyrotechnic devices while developing our associates and maximizing long-term value for our shareholders through organic growth and targeted acquisitions. GENERAL STATEMENT OF DUTIES: An individual who under moderate supervision applies standard procedures to perform a variety of component assembly tasks, ensuring products meet our high standards. ESSENTIAL DUTIES AND RESPONSIBILITIES: An Assembler is an individual who under moderate supervision applies standard procedures to perform a variety of component assembly tasks, ensuring products meet our high standards Assembles components in accordance with drawings and operation sheets. Responsible for weighing, loading and pressing operations. Handle tooling and fixtures / use various hand tools to produce or modify parts. Maintains count and order progress and logs in time / quantities. Closes and assembles units (use of crimping and closure tools and epoxy applications). Soldering tasks, i.e. small wire soldering, terminal soldering, bridge wire welding. Assists with the packaging of pyrotechnic assemblies where required. Follows required company safety practices and quality procedures. Follows procedures as defined by CAD policies, procedures and ISO9001 requirements. Maintains confidentiality of all information processed. Perform other related duties as assigned. PHYSICAL DEMANDS: While performing the duties of this job, the employee is occasionally required to stretch, bend, kneel and stoop. The employee is regularly required to walk, communicate, and reach with hands and arms. The employee is frequently required to sit, stand, and use hands to finger, handle, or feel. The employee must occasionally lift and/or move up to 50 pounds using appropriate moving devices. Specific vision abilities required by this job include close vision, color vision, depth perception and ability to adjust focus. WORK ENVIRONMENT: While performing the duties of this job, the employee is regularly exposed to solder, fluxes, cleaners, epoxies, and masking agents while using appropriate personal protective equipment. Works in a temperature controlled environment. The noise level in the environment is usually low to moderate. DISCLAIMER The above information on this description has been designed to indicate the general nature and level of work performance by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Cartridge Actuated Devices is an Equal Opportunity Employer and encourages the application of female, minority, disabled, and veteran candidates. Due to the potential for exposure to ITAR controlled data, the incumbent in this role must be a US Person (US Citizen or US Permanent Resident). Due to the nature of our products, To the extent applicable to an employee's role, each employee must be able to obtain (and maintain) the ATF Possessor License as a condition of employment. Employment with Cartridge Actuated Devices is contingent upon the successful completion of a background investigation, including any required Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) screening, and drug screening, as permitted by applicable law. The background investigation may include verification of employment history, education, criminal records, ATF-mandated checks, and other relevant information to determine suitability for employment. The drug screening will be conducted in accordance with state and federal regulations. Failure to successfully pass the background check, ATF screening, or drug screening, or the provision of false or misleading information during the application process, may result in withdrawal of a job offer or termination of employment. By proceeding with the application process, you acknowledge and consent to the background, ATF, and drug screening requirements as described above.

Pillen Family Farms is a family owned business located in Nebraska. We market approximately 2 million pigs annually. As a family-owned and family-focused farming operation, great care goes into everything we do. From family members to team members, to even our pigs we believe in treating others with respect and as part of our family. Job Description: * Position will be responsible for animal husbandry and production at their assigned genetic nucleus farm. * This position will be involved with the accurate collection of data during the different production phases. * This position is ideal for a person who enjoys science, technology, and animals. * Specific responsibilities include but are not limited to: * Assessment of pig body and health condition. * Administration of proper treatment to animals. * Maintain most optimum environment for herd. * Assessment and recording ventilation guidelines. * Timely and accurate reporting of records. Requirements: * Fine motor skills for writing data, administering treatment shots, and weighing individual piglets. * Frequent kneeling, reaching, and steady balance required for treating piglets. * Continuous walking and standing; a minimum of 8 hours per day. * Positive attitude, willingness to learn, interpersonal communication. * Comply with all bio-security, safety, and animal welfare policies.

FULL-TIME: SOLDERING Technician / Electronics Assembler- Candidate will be assembling circuit boards and utilizing SMT and thru-hole soldering techniques. Candidates MUST HAVE strong SOLDERING background and electrical assembly experience. 1. Must follow standard operating procedures and written instructions which vary by assembly. 2. Operate production equipment; utilize tools to complete assemblies in accordance with operation policies and procedures; strict attention to detail required and documentation of work flows and test results. 3. Operate within standard operating procedures (SOPs), Job Safety, FDA GMP standards. 4. Complete daily production logs. 5. Communicate with other assemblers, technicians, manager and other department members as necessary; Maintain safe and clean work environment. 6. Assist Manufacturing in repair work. Qualifications Surface mount technology operations, fine pitch soldering, rework. Must be able to work within a small range of motion as the instrument has many small components where soldering and reworking is necessary. Working under a microscope is a big plus as is prior Medical devices experience. Successful candidate must possess the ability to work in a regulated environment and work in both team, independent modes and multi-task. Ability to perform hands-on assembly tasks and also must possess proficiency with tools and related equipment in a manufacturing setting. Basic reading, writing, arithmetic skills and a familiarity with computers. Attention to detail and quality of work are required skills. Desired: 3-5 years of relevant experience in an electro-mechanical assembly production environment required (preferably in the medical device field). Ability to perform hands-on assembly tasks and also must possess proficiency with tools and related equipment in a manufacturing setting. . Education: High School Diploma / GED Technical School Electronics / Soldering / Mechanical / Circuit Board training SMT and thru-hole soldering experience needed Technical school training or Associates (AS) degree Additional Information PERMANENT-FULL TIME position - Clean work in a pleasant environment - work hours are 7:30 am to 4:00 pm Monday to Friday. Rate of Pay $15.00 to $17.00 per hour depending on experience and qualifications. Benefits package after 90 Days to include Health Benefits Sick time and Vacation Pay in accordance with company benefit policy :

About the Company: Aerolase is the fastest growing medical laser company, serving the high growth dermatology and aesthetic laser market. Nestled in the picturesque Hudson Valley in Tarrytown, NY, the location is also ideal for access to NY City and other areas of the Northeast and Mid-Atlantic U.S. We are hiring in many areas and currently seek laser optical engineering technicians with a passion for creating new things. The company offers a friendly, team-oriented work environment and competitive compensation including salary, bonus, stock options, 401k, and health/dental/life insurance plans. About the Team: • We are a diverse team of friendly, creative hard-working people with a passion for achieving our objectives • We are creative, hands-on and innovative with a strong orientation toward high customer satisfaction • We have created a very team-spirited company culture and believe it is important to have open and effective cross-functional collaboration and communications - and enjoy our work! About the role: We're looking for an enthusiastic, creative and detail-oriented problem solver to help support the production, service and repair of our unique solid-state laser devices. Must have expertise working hands-on with assembly and/or development of small, sensitive, high precision instruments, preferably solid-state laser technology, with a high caliber technology company. We prefer design and hands-on experience in multiple laser technologies including solid state lasers, semiconductor lasers, non-linear optical materials and devices, optical benches, and beam directors. Experience with the technical aspects of developing laser and laser-based products is preferred. Candidates should have proven ability to address complex challenges with ingenuity and innovation, and capability to work independently to manage multiple simultaneous tasks, and see all tasks to completion. Also should have the ability to work well in a collaborative multidisciplinary team environment, define and analyze system performance specifications, and ensure adherence to those specifications in the application environment. Responsibilities: • Test, troubleshoot repair and assemble lasers, subassemblies and various components, including high-voltage laser power supplies and other electronics. • Support the development and implementation of test fixtures, equipment, procedures and documentation for the engineering and operations functions. • Support product design and development activities related to new products and product improvements. • Support development and maintenance of quality and regulatory documents and procedures. • Maintain thorough, complete and accurate written records; comply fully with the company's quality system and any regulatory requirements. • Follow safety rules for working with high-voltages and high-power lasers. • Perform other duties as completion of responsibilities necessitates or as assigned by supervisor. Skills and Experience: 1. Minimum 1-3 years of experience in a technical role involving high power pulsed power supplies. 2. Understanding of system, board and component design, testing and troubleshooting. 3. Theoretical and practical knowledge and skills of adequate policies and procedures for the control of laser hazards and high voltage hazards, using relevant protective equipment, ensuring adequate safety education and training of other personnel. 4. Enjoy working with your hands/mechanical ability. 5. Strong analytical and problem solving skills. 6. Proven technical and project management skills. 7. Experience with manufacturing within a Quality Management System (especially medical). 8. Strong interpersonal and communication skills. 9. Self-motivated, detail oriented and well organized. Ability to make decisions and work independently Strong work ethic and desire to help the company successful by producing a reliable product. 10. Not afraid to ask questions and make suggestions for improvement. 11. Be able to work under pressure due to customer demands. 12. Strong computer skills (Windows™ software). 13. Ability to successfully manage multiple projects and daily responsibilities. Ability to discern and appropriately communicate sensitive issues. 14. Ability to walk, stand, bend, reach, stoop/squat, and crouch. Ability to carry heavy items. Educational Requirements: 15. A.S. or higher in technical discipline, optical engineering preferred

JOB TITLE: Engineering Technician TYPE: Full time, regular COMPENSATION: $29.00/hr $36.00/hr Clarapath is a medical robotics company based in Westchester County, NY. Our mission is to transform and modernize laboratory workflows with the goal of improving patient care, decreasing costs, and enhancing the quality and consistency of laboratory processes. SectionStar by Clarapath is a ground-breaking electro-mechanical system designed to elevate and automate the workflow in histology laboratories and provide pathologists with the tissue samples they need to make the most accurate diagnoses. Through the use of innovative technology, data, and precision analytics, Clarapath is paving the way for a new era of laboratory medicine. Role Summary: The Engineering Technician will be working on medical device development and integration as part of a tight knit team. This role is multi-disciplinary with responsibility for assembling mechanical, electro-mechanical, and optical subassemblies and integrating them into the final flag-ship product. In addition, the candidate should be able to assemble, install and troubleshoot wiring components, having a strong understanding of electrical systems. The ideal candidate should have experience working in a fast-paced manufacturing environment. Responsibilities : Operate manufacturing equipment and machinery according to established procedures and safety guidelines Interpret standard work instructions, technical diagrams, schematics, and blueprints to build and troubleshoot multiple assemblies Perform precision assembly tasks using a variety of methods, including hardware such as screws, bolts, and fasteners, as well as adhesives, to ensure accurate and secure assembly of components Perform the installation, routing, and termination of electrical wiring systems according to design specifications and industry standards Utilize a variety of hand and power tools to cut, strip, crimp, and connect wires and cables Conduct quality control inspections at various stages of the production process to ensure product integrity and adherence to standards Troubleshoot equipment malfunctions and electrical systems to identify and resolve issues efficiently Work with computers and software to operate, monitor, and troubleshoot automated test equipment and diagnostic systems Perform routine maintenance tasks to keep machinery in optimal condition Collaborate with engineers, other team members and supervisors to identify, troubleshoot, and resolve issues related to product assembly and wiring configurations Adhere to all company policies and procedures, including those related to safety, quality, and regulatory compliance Qualifications : High school diploma or equivalent required; associate degree, technical certification or vocational training preferred 3+ years of manufacturing experience, medical device, electro-mechanical, or optical experience Ability to read, interpret and follow industry standards and internal work instructions, specifications, and engineering drawings Experience with computer systems and software applications used to control, run, and diagnose engineering test equipment. Familiarity with operating machinery and tools used in production processes Proficiency in reading and interpreting technical diagrams, schematics, and blueprints Strong knowledge of electrical wiring principles, techniques, and safety standards Strong attention to detail and commitment to producing high-quality work Excellent problem-solving and mechanical aptitude Effective communication skills and ability to work well in a team environment Flexibility to work in fast-paced environment and adapt to changing project requirements Familiarity with ISO 13485 standards, a plus Company Offers: Competitive salary, commensurate with experience and education Comprehensive benefits package available: (healthcare, vision, dental and life insurances; 401k; PTO and holidays) A collaborative and diverse work environment where our teams thrive on solving complex challenges Ability to file IP with the company Connections with world class researchers and their laboratories Collaboration with strategic leaders in healthcare and pharmaceutical world A mission driven organization where every team member will be responsible for changing the standards of delivering healthcare Clarapath is proud to be an equal opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. In addition to federal law requirements, Clarapath complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description About Us: Safe Flight, a leader in aviation safety and flight performance systems, was founded in 1946. The company pioneered the development of Stall Warning and Angle of Attack, Automatic Throttle Systems, Wind Shear Warning, and many other innovations in aircraft instrumentation, flight performance, and control systems for fixed and rotary winged aircraft. With product installed on over two-thirds of the world's aircraft, Safe Flight counts among its customers the majority of the world's aircraft manufacturers, more than 50 airlines, hundreds of operators of corporate jet aircraft and U.S. and International Armed Services. Safe Flight's benefits include employer-funded health care, on-site lunch program, 401K contribution, Wellness and Education Reimbursement, paid-time off and sick time, and various other programs. Duties/Responsibilities: Build test sets and cable assemblies from schematics and assembly drawings utilizing hole and SMT technology. Assist engineering in construction and rework of electromechanical prototypes. Perform routine calibration of electronic instruments and coordinate outside calibration for equipment that cannot be calibrated in-house. Work with engineering to troubleshoot equipment. Perform other related duties as assigned. Required Skills/Abilities: Associate degree in electronics, avionics, or a related field with a basic understanding of electronic circuit theory. Comfortable reading and editing schematics and drawings. Proficient in using computers with a strong drive to learn new tools to work effectively with engineering. Experience as an electronics technician in an ISO or AS9100 facility is preferred. Equal Opportunity Employer/Veterans/Disabled An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. #hc132978

About Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: Thea Energy is seeking highly skilled and motivated technicians to join our rapidly growing team. The Engineering Technician will be at the forefront of bringing our innovative designs to life. You will be responsible for hands-on fabrication, assembly, and testing of critical hardware including superconducting magnets, high vacuum and cryogenic equipment, electromechanical systems, and other associated hardware. You will be expected to work with a high degree of autonomy, troubleshoot complex problems, and contribute to the continuous improvement of our processes. If you are passionate about building cutting-edge technology and thrive in a fast-paced environment, we want to hear from you. Key Responsibility Areas: Build, operate, maintain, and troubleshoot complex mechanical and electrical systems Assist in developing new equipment, tools, procedures, and inspection techniques to reduce production time while maintaining high quality Responsible for tool and workspace organization and maintenance Assemble and troubleshoot test articles and supporting test equipment Collaborate to support development of manufacturing processes and tooling Required Experience & Skillsets: High-school diploma or equivalent 5+ years of experience in shop fabrication, manufacturing, research, or high-tech industry 5+ years of technical experience with any of the following:mechanical or electrical systems, high pressure or high vacuum systems, cryogenic systems, plumbing, soldering, system testing, power or controls systems Comfortable working to aggressive deadlines and exceptional work ethic Proficiency with Microsoft Office suite tools or similar software Ideal Experience: Knowledge of quality control and inspection procedures Experience operating, maintaining, or troubleshooting or programming automation equipment, e.g. PLC, HMI, or process controllers Experience with reflow solder processes, including PCBA manufacturing Crane or lifting experience Forklift experience Experience with electrical schematic and wiring Experience using various types of hand tools and precision measuring tools Experience in documenting, improving, and implementing process instructions Experience with reading and reviewing mechanical drawings Experience with machining, operating manual milling, saws, and other tools Company Benefits: Hourly rate $30-43/hr Comprehensive health benefits (e.g. medical/dental/vision) Employee equity stock options 20 days PTO It's not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world's hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran's status, or other characteristic protected by applicable laws and regulations.

The Company: GIA is the world's foremost authority in gemology. GIA is a global organization with headquarters located in Carlsbad, CA. GIA in Carlsbad boasts a 17-acre ocean view campus that accommodates approximately 600 of its 3,000 total employees worldwide. It offers many competitive health and commuter benefits that promote the well-being of its employees as well as that of the environment. Click here to learn more about GIA! The Location: Secaucus New Jersey - a hub of gemological excellence and innovation. Located just minutes from New York City, our New Jersey campus offers a dynamic work environment where passion for gems and jewelry meets cutting-edge technology and research. The Environment: On-site cafe - affordable custom breakfast and lunch meals and Starbucks drinks! Economic friendly services - electric vehicle charging stations on-site Ergonomic assessments offered on-site and virtually The Culture: We foster an environment of autonomy, performance, and passion. Our team members collaborate extensively across various departments, providing high-quality service to internal staff, stakeholders, and the organization. We value initiative, cross-functional cooperation, and a commitment to excellence in all our endeavors. What to expect: We offer competitive medical, dental, vision and matching 401-K plans (no vesting required) Paid vacation, sick and holidays, tuition assistance, commuter benefits Job Overview: The Engineering Technician will work with the Instrument Development Team in Secaucus, NJ to assemble various functional instruments to meet the organization's daily operational needs with R&D activities. The Engineering Technician will be responsible for instrument assembly by performing the following duties. Essential Duties & Responsibilities: Assemble hardware with allen keys, wrenches and optical tools Strip, Crimp, Solder and Harness wires Understand 3d assembly prints and electrical schematics Assemble prototypes and instruments, perform validation testing Help scientists with data collection and analysis documenting testing processes Documents assemble steps and markup assembly drawings with notes and modifications for engineering review Assemble components with limited oversite Bring assembly issues and potential solutions for the attention of the Manager for review Provide updated estimates for assembly completion dates Monitor and order inventory Operate equipment including but not limited to drills, saws, cutting and other manufacturing and fabrication tools. Communicates effectively, gets along with coworkers and management, and deals with others effectively and professionally under pressure. Travels globally using commercial transportation resources for installations of future equipment. Job Competencies: Language skills: ability to read, comprehend and follow standard procedures or instruction in local language (proficiency in reading, writing and speaking in English required) Communication skills: communicate professionally (communicate respectfully, listen, articulate/explain issues, use professional tone, know when to email vs call, etc.) Interpersonal skills: create positive interactions with colleagues; actively communicates with others in a timely & professional manner; maintains good working relationships with others and peers with a team-oriented mindset. Ability to share knowledge with others to enhance collaboration Problem Solving: identifies basic problems and fixes or escalates as required; uses fact finding to determine the best approach to solve problems; applies basic analytical thinking to clarify issues and propose solutions with sound judgement and decision-making abilities Computer skills: Basic knowledge of MS Office (Excel, Word, PowerPoint) Detail-oriented/Ability to focus and complete tasks assigned in a timely manner Ability to multi-task, prioritize, and manage time effectively Ability to learn, understand and follow Standard Operating Procedures Ability to learn and use basic office equipment. Maintains & fosters sensitivity and respect for cultural diversity Comfortable with 3D software (Edrawings or Solidworks) for viewing 3D designs Skilled with MS Word and Excel Work with engineers in a fast-paced and demanding work environment Must be able to perform all tasks in a safe manner under minimal supervision Strong communication and documentation skills, self-motivated with good verbal and written communication skills in English Minimum Qualifications: High School Diploma, or equivalent, and 2+ year(s) related experience, associate's degree preferred. Robotics experience a plus Additional Requirements: 2+ years' hands-on experience assembling and testing lab grade hardware (mechanical/electrical) This role may require occasional travel globally using commercial transportation resources for installations of future equipment. Work Environment/Physical Demands: Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is occasionally exposed to outside-weather conditions. The noise level in the work environment is usually moderate. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to sit and talk or hear. The employee is occasionally required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; and climb or balance. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Pay Range: $24.50-$31.50 an hour An Equal Opportunity Employer All employment decisions are made without regard to unlawful considerations of race, sex, religion, national origin, age, disability, or any other legally protected status. Reasonable accommodations are available upon request. Disclaimer: This indicates in general terms, the type and level of work performed as well as the typical responsibilities of employees in this classification and it may be changed by management at any time. Other duties may also apply. Nothing in this job description changes the at-will employment relationship existing between the Company and its employees.

Visit PDF for full description: ************ cityofwhiteplains. com/DocumentCenter/View/11402/Engineering-Technician

Salary: $ 70,000.00 We have partnered with a manufacturing company in Mahwah, NJ to provide them with a Engineering Technician. Please review the below description and let us know if you are interested. Prioritized Must Have Skills for the Engineering Technician: #1. Technical School Degree or Associates required, Bachelors degree in Engineering a plus #2. Ability to use basic power tools #3. Ability to do basic prototyping #4. Prior experience with building and disassembling small products #5. CAD not required, but prior experience is a plus Responsibilities of the Engineering Technician: The Engineering Technician will aid the Product Development team by working with physical products in the testing lab. Daily tasks include disassembling products and running test procedures and assisting the engineering team with fabrication. The ideal candidate is organized with multiple projects, thorough in detail-oriented tasks, and possesses a friendly personality. Role & Responsibilities Work with Engineering team to help with fabrication and test setups. Disassembling competitors products for technical evaluation Work with Systems programmers to develop new product systems parameters and evaluation of system functionalities. Evaluating client products with test procedures after disassembly Requirements of the Engineering Technician: Determining and performing tests needed for the analysis and report Recording tests and analyses and then reporting the results Discussing and answering any questions regarding the results Organizing and storing samples Cleaning and maintaining lab equipment, including recalibration of equipment Staying current on technical and scientific advances in their field Technical School Degree or Associates required, Bachelors degree in Engineering a plus Ability to use basic power tools Ability to do basic prototyping Prior experience with building and disassembling small products CAD not required, but prior experience is a plus Microsoft Office proficient Other Key Requirements for the Engineering Technician: Onsite role. No sponsorships or visa holders. No Corp-to-Corp. Benefits of the Engineering Technician: Medical Insurance Dental Insurance Life Insurance Disability Insurance 401(k) plan About the Company: Cyfle is a global business dedicated to connecting talents worldwide. Our comprehensive RPO services, placement services, and training services help businesses unlock their full potential.

Job Description Job Title: Production Technician Department: Production Reports to: Production Value Stream Supervisor DreamFields is one of the top 5 cannabis companies in the industry through our leading #1 pre-roll brand, Jeeter. The company is very passionate about producing world-class marketing, high quality, innovative products, delivering unprecedented customer experiences, having cutting-edge operations, and curating an amazing company culture & thriving work environment. With over 1500+ employees we are proud to be one of the most loved employers in the industry. The company continues to experience exponential month-over-month growth as one of the fastest-growing companies in the cannabis industry and we have begun our aggressive national expansion to all the legalized cannabis states in the USA. Job Summary: Cannabis Production Technicians are directly involved in manufacturing our products from the initial stages to final sale-ready units that will be distributed to dispensaries throughout the state and ultimately into the hands of our customers who enjoy our top-of-the-line branded products. Duties/Responsibilities: Manipulating flower and oil. Weighing, stuffing, and rolling products. Labeling, stickering, and packaging finished goods. Required to hit specific cycle times in each position. Required to work in a high-volume manual production assembly line and achieve both individual and team performance goals. Required Skills/Abilities: Must be at least 21 years old, as required by state law. Ability to work well with others and independently. Ability to learn and adapt to various strains, styles, and types of cannabis. Ability to manage time in a fast-paced environment to meet goals without sacrificing quality. Ability to maintain a high standard of health and hygiene as required by OSHA. Ability to follow instructions and be receptive to feedback/coaching from the management team to maintain product quality. Education and Experience: HS Diploma or GED required. 1+ years of experience in a production or manufacturing position. 1+ years of experience in manufacturing consumable goods is preferred. Must have working knowledge of GMP (Good Manufacturing Practices). Physical Requirements: Must be physically capable of standing or sitting for long periods. Must be able to lift up to 40 lbs. Must have full use of arms and fingers for fine manipulation of cannabis. Must be capable of repetitive motions using hands and arms while working with cannabis. Must be willing and able to wear all mandatory Personal Protective Equipment provide. Work Schedule: Your regular schedule will be Monday through Friday. From time to time, you may be scheduled to work on Saturdays; some of these shifts will be mandatory while others may be voluntary. Please be aware that staffing requirements and operational demands may result in adjustments to your scheduled start and end times, workdays, and total weekly hours. Whenever possible, advance notice of schedule changes will be provided. EEOC: DreamFields is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. All candidates must be willing to submit to a background check to be considered for the position.

Job Description COMPANY CULTURE Our focus is to deliver world-class solutions to our customers, on time and of the highest quality as the preferred supplier of highly engineered, energetic, and pyrotechnic devices while developing our associates and maximizing long-term value for our shareholders through organic growth and targeted acquisitions. GENERAL STATEMENT OF DUTIES: An individual who under moderate supervision applies standard procedures to perform a variety of component assembly tasks, ensuring products meet our high standards. ESSENTIAL DUTIES AND RESPONSIBILITIES: An Assembler is an individual who under moderate supervision applies standard procedures to perform a variety of component assembly tasks, ensuring products meet our high standards Assembles components in accordance with drawings and operation sheets. Responsible for weighing, loading and pressing operations. Handle tooling and fixtures / use various hand tools to produce or modify parts. Maintains count and order progress and logs in time / quantities. Closes and assembles units (use of crimping and closure tools and epoxy applications). Soldering tasks, i.e. small wire soldering, terminal soldering, bridge wire welding. Assists with the packaging of pyrotechnic assemblies where required. Follows required company safety practices and quality procedures. Follows procedures as defined by CAD policies, procedures and ISO9001 requirements. Maintains confidentiality of all information processed. Perform other related duties as assigned. PHYSICAL DEMANDS: While performing the duties of this job, the employee is occasionally required to stretch, bend, kneel and stoop. The employee is regularly required to walk, communicate, and reach with hands and arms. The employee is frequently required to sit, stand, and use hands to finger, handle, or feel. The employee must occasionally lift and/or move up to 50 pounds using appropriate moving devices. Specific vision abilities required by this job include close vision, color vision, depth perception and ability to adjust focus. WORK ENVIRONMENT: While performing the duties of this job, the employee is regularly exposed to solder, fluxes, cleaners, epoxies, and masking agents while using appropriate personal protective equipment. Works in a temperature controlled environment. The noise level in the environment is usually low to moderate. DISCLAIMER The above information on this description has been designed to indicate the general nature and level of work performance by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Cartridge Actuated Devices is an Equal Opportunity Employer and encourages the application of female, minority, disabled, and veteran candidates. Due to the potential for exposure to ITAR controlled data, the incumbent in this role must be a US Person (US Citizen or US Permanent Resident). Due to the nature of our products, To the extent applicable to an employee's role, each employee must be able to obtain (and maintain) the ATF Possessor License as a condition of employment. Employment with Cartridge Actuated Devices is contingent upon the successful completion of a background investigation, including any required Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) screening, and drug screening, as permitted by applicable law. The background investigation may include verification of employment history, education, criminal records, ATF-mandated checks, and other relevant information to determine suitability for employment. The drug screening will be conducted in accordance with state and federal regulations. Failure to successfully pass the background check, ATF screening, or drug screening, or the provision of false or misleading information during the application process, may result in withdrawal of a job offer or termination of employment. By proceeding with the application process, you acknowledge and consent to the background, ATF, and drug screening requirements as described above.

South East Instruments, LLC is a Medical Device Manufacturer and Distributor located in Englewood, NJ with products are available across the US. Job Description FULL-TIME: SOLDERING Technician / Electronics Assembler- Candidate will be assembling circuit boards and utilizing SMT and thru-hole soldering techniques. Candidates MUST HAVE strong SOLDERING background and electrical assembly experience. 1. Must follow standard operating procedures and written instructions which vary by assembly. 2. Operate production equipment; utilize tools to complete assemblies in accordance with operation policies and procedures; strict attention to detail required and documentation of work flows and test results. 3. Operate within standard operating procedures (SOPs), Job Safety, FDA GMP standards. 4. Complete daily production logs. 5. Communicate with other assemblers, technicians, manager and other department members as necessary; Maintain safe and clean work environment. 6. Assist Manufacturing in repair work. Qualifications Surface mount technology operations, fine pitch soldering, rework. Must be able to work within a small range of motion as the instrument has many small components where soldering and reworking is necessary. Working under a microscope is a big plus as is prior Medical devices experience. Successful candidate must possess the ability to work in a regulated environment and work in both team, independent modes and multi-task. Ability to perform hands-on assembly tasks and also must possess proficiency with tools and related equipment in a manufacturing setting. Basic reading, writing, arithmetic skills and a familiarity with computers. Attention to detail and quality of work are required skills. Desired: 3-5 years of relevant experience in an electro-mechanical assembly production environment required (preferably in the medical device field). Ability to perform hands-on assembly tasks and also must possess proficiency with tools and related equipment in a manufacturing setting. . Education: High School Diploma / GED Technical School Electronics / Soldering / Mechanical / Circuit Board training SMT and thru-hole soldering experience needed Technical school training or Associates (AS) degree Additional Information PERMANENT-FULL TIME position - Clean work in a pleasant environment - work hours are 7:30 am to 4:00 pm Monday to Friday. Rate of Pay $15.00 to $17.00 per hour depending on experience and qualifications. Benefits package after 90 Days to include Health Benefits Sick time and Vacation Pay in accordance with company benefit policy :