Assembly technician jobs in Davie, FL - 121 jobs

Gaumard is looking for talented individuals like you! Assemblers perform tasks that are necessary to the production process. They aid in the fabrication, maintenance, and repair of component parts and products. This role carefully follows assembly instructions and correctly places and attaches parts to create sub-assemblies or finished products. The person filling this position will have familiarity with working in a production environment and will be required to follow detailed instructions. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. SUPERVISION RECEIVED AND EXERCISED: Receives direct supervision from the Team Lead, and indirect supervision from the Department Manager. Does not exercise supervision over any other position. This position is located in Building 2 - Lo Fi Production Department. DUTIES AND RESPONSIBILITIES: Follow detailed instructions to prepare parts for assembly according to procedures and guidelines. Operate equipment necessary to produce materials and products. Perform quality checks on products and parts. Count finished products to determine if product orders are complete. Effectively communicate manufacturing, material, or equipment issues to supervising personnel. Work cooperatively with the assembly team to meet quotas and goals. Assist other technical department personnel as required. Make every effort to increase productivity and efficiency without compromising quality. Perform routine area and equipment cleaning. Perform related duties as assigned Other duties as necessary QUALIFICATIONS/REQUIREMENTS: Education: high school diploma or its equivalent. An individual with an assembly background is preferred. Experience in a production and manufacturing environment preferred. Excellent manual dexterity and fine motor skills. Able to follow detailed written and oral instructions. Must be efficient and careful not to damage items. Good organizational skills with strong attention to detail and the ability to organize items. PHYSICAL/MENTAL REQUIREMENTS: Excellent manual dexterity and fine motor skills. Frequent use of the arms, hands, and fingers is required to perform functions such as reaching, grabbing, pinching, picking, holding, and turning. Frequent use of hand and power tools weighing up to 15lbs. The employee is interchangeably required to sit, stand, and walk during their shift. Employees may be required to bend, stoop or kneel to grab supplies and or materials The employee must be able to lift, carry, push, or pull or move objects across the production floor, weighing up to 40 pounds with or without reasonable accommodation. The employee may be required to reach at or below shoulder level and reach overhead for short to moderate periods. Must be able to hear, understand, and distinguish sounds and speak clearly. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WHAT YOU'LL GET WHEN YOU JOIN THE GAUMARD FAMILY: Competitive Pay Full health benefits (medical, vision, dental) Paid Time Off (PTO) 11 Paid Holidays Retirement plan with 100% employer match up to 5% of employee's contribution Satisfaction knowing that you have joined a long-standing company Hours: Monday to Friday 8:00 AM to 4:30 PM must be willing and able to work some Saturdays or stay beyond scheduled shift if needed to meet business demands. The above supersedes all previous descriptions. This job description is intended to be a tool to describe the primary purpose of the job and the KEY duties and responsibilities. This description does not state or imply that the functions listed above are the only tasks to be performed by the employee occupying this position. Management has the right to add to or change the job responsibilities at any time . Equal Employment Opportunity Statement: Gaumard Scientific is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: Gaumard Scientific is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Gaumard Scientific are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Gaumard Scientific will not tolerate discrimination or harassment based on any of these characteristics. Gaumard Scientific encourages applicants of all ages. Gaumard Scientific will provide reasonable accommodation to employees who have protected disabilities consistent with local law.

Job Description About the Role: The Assembly Technician plays a critical role in the manufacturing process by accurately assembling components and products according to detailed specifications and quality standards. This position ensures that all assembled products meet safety and performance requirements before moving to the next stage of production or shipment. The technician will work closely with engineering and quality assurance teams to identify and resolve assembly issues, contributing to continuous improvement initiatives. Attention to detail and adherence to safety protocols are paramount to maintain a safe and efficient work environment. Ultimately, the Assembly Technician helps deliver high-quality products that meet customer expectations and support the company's reputation for excellence. Minimum Qualifications: High school diploma or equivalent. Basic understanding of mechanical and electronic assembly processes. Ability to read and interpret technical drawings and assembly instructions. Proficiency in using hand and power tools safely and effectively. Strong attention to detail and manual dexterity. Preferred Qualifications: Previous experience in an assembly or manufacturing environment. Familiarity with quality control standards such as ISO or Six Sigma. Ability to use measurement tools such as calipers and micrometers. Responsibilities: Assemble mechanical and electronic components using hand tools, power tools, and assembly fixtures according to work instructions and blueprints. Inspect parts and assemblies for defects or deviations from specifications and report any quality issues to supervisors. Maintain a clean and organized work area to ensure safety and efficiency. Collaborate with team members and supervisors to troubleshoot assembly problems and implement corrective actions. Document assembly processes and complete production reports accurately and timely. Skills: The required skills enable the Assembly Technician to accurately interpret technical documents and perform precise assembly tasks, ensuring product quality and consistency. Manual dexterity and tool proficiency are essential for efficient and safe handling of components and equipment. Attention to detail helps in identifying defects early and maintaining high standards throughout the assembly process. Preferred skills such as knowledge of quality control and measurement tools enhance the technician's ability to contribute to process improvements and maintain compliance with industry standards. Effective communication and teamwork skills support collaboration with colleagues and supervisors to resolve issues and optimize production workflows.

Landing Gear Technologies (LGT) is an FAA-Certified Repair Station specializing in the repair and overhaul of aircraft landing gears and components. We believe our organization can only be as good as the employees that stand behind it. In this constantly growing industry, we are always seeking talented and dedicated individuals to join our team. We are looking for a Landing Gear Assembly Technician to support the final assembly and build-up of aircraft landing gear components and assemblies. This position focuses on the precise reassembly and testing of overhauled or repaired parts, ensuring they meet OEM and FAA standards for quality and airworthiness. Duties and Responsibilities: · Perform final assembly and build-up of landing gear components, subassemblies, and full assemblies per OEM Component Maintenance Manuals (CMMs) and work instructions. · Install seals, O-rings, hardware, bushings, bearings, and fittings using appropriate tools and calibrated equipment. · Torque hardware to specified values and record all critical measurements and readings. · Ensure proper alignment, fitment, and functionality of all parts during assembly. · Perform hydraulic shock strut test, gap checks, and other test as required. · Collaborate with Quality teams to complete in-process and final inspections. · Tag and prepare completed assemblies for shipment or return to customer. · Maintain accurate records of work performed, including parts used, serial numbers, and inspection results. · Follow all safety guidelines and ensure a clean and organized work area. · Support continuous improvement initiatives and process consistency within the assembly area. Qualifications: · High school diploma or equivalent required; technical school or A&P license a plus. · 2+ years of experience in mechanical assembly, preferably in aerospace or MRO. · Proficient with hand tools, torque wrenches, hydraulic presses, and alignment tools. · Ability to interpret and follow CMMs, blueprints, and detailed work instructions. · Strong mechanical aptitude and high attention to detail. · Familiarity with FAA Part 145 repair station procedures is preferred. · Team player with strong communication and time management skills. Requirements Physical Requirements: · Ability to lift up to 50 lbs and stand for prolonged periods. · Good manual dexterity and hand-eye coordination. · Must be able to wear appropriate PPE and work in a shop environment. · Stand for long periods of time. · Must be able to hear, understand, and distinguish sounds and speak clearly. · Job Type: Full-time.

THIS POSITION REQUIRES TRAVEL IN AND AROUND THE SURROUNDING STATES. Must be willing and able to travel to various customer sites. Paid lodging along with per diem/daily stipend. Once fully trained (approx 1-2 weeks - paid) you'll be out on the road, traveling to and working at our customer sites. Travel time and scheduling needs may vary. Who We Are National Assemblers, Inc is family-owned and the largest retail assembly company in the world, with over 10 Million products assembled for our customers last year. We are the trusted provider to the world's largest brands like Amazon, Walmart, Lowes, Wayfair, Bass Pro Shop, and most importantly, to individual customers who trust us in their homes. We were awarded “Assembly Company of the Year” for 2022 all due to our hardworking technicians who have pride in all they do! We are also the fastest growing, with over 100 new management roles created and filled last year! If you have the will and the skill, we have the opportunities for you! Who You Are You love working with your hands to build products. You're the one all of your family and friends call to assemble their new bike or grill. You have an entrepreneurial spirit and like the benefits and backing of a W-2 organization. You enjoy independence and are self-motivated. Customer satisfaction and high quality is your top goal when working. You are reliable and have a proven attendance record with reliable transportation. You're not afraid of hard work and enjoy a good challenge. If this sounds like you, we would love you to join our NAI family! What You'll Do You'll build bikes, grills, furniture & anything our customer's request. You'll be working independently and will need your own reliable transportation to get to the store. You'll assemble the product to National Assembler's specifications You'll build a strong rapport with customers and ensure 100% satisfaction by delivering good customer service and quality product What's In it For You Piece-rate earnings (hard work results in high pay = unlimited earning potential) Top-notch training certification program with a guaranteed minimum (get paid to learn a trade!) Mileage Reimbursement Overtime Pay Weekly Pay Medical/Dental/Vision Insurance (Benefits begin after 60 days of employment) 401K W-2 Employee Travel opportunities A nationwide support staff who is focused on your personal development and success You'll Meet These Basic Job Requirements You must be able to lift 40 pounds You must have your own RELIABLE transportation This job requires regular driving to retail customers (most stores are within 15 to 75 miles of your home) You must have basic hand tools APPLY NOW to start building your future with us! National Assemblers, Inc is an equal opportunity employer and does not discriminate against otherwise qualified applicants on the basis of race, color, creed, religion, ancestry, age, sex, marital status, national origin, sexual orientation, disability or handicap, veteran status and any state and local protected status.

Job Description Assembles mechanical units, fabricated parts/components and/or electrical/electronic systems to make subassemblies, assemblies or complete units using hand tools, power tools, jigs, fixtures and miscellaneous equipment. Fits, aligns, calibrates and adjusts parts and mechanisms to meet tolerances and product operating requirements; repairing units or products that have failed to meet requirements. This position requires knowledge that is acquired through experience, specialized education or training. The role has clearly defined procedures and tasks as well as defined guidelines to aid in decision making. Technical knowledge required is limited to the tasks performed in own discipline area and is considered basic. The tasks are generally routine and manual. The job is expected to follow detailed and defined rules / instructions and to make simple judgement in straightforward situations. Typically requires selecting between solutions already established. This job typically requires no experience. Hours:8:00am to 5:00pm Additional Job Details: The worker must be open to work first or second shift (2PM-11PM) Note Shift preference on the top of the resume. Electromechanical background required.

The Assembly Technician is responsible for the assembly of valves. The Technician must be able to read and understand Engineering blueprints, follow work instructions precisely, and utilize any other approved and relevant documents for assembling valves. Exact demands will vary depending on the assigned job and station. The Technician may be required to be knowledgeable and competent in multiple stations within the Assembly department. The Technician exercises care and due diligence ensuring work instructions and procedures are followed and quality requirements are upheld (proper handling, visual appearance, and any other assembly specific quality elements). Responsibilities Be able to work well under pressure and in a high-volume manufacturing environment. Exercise required care when assembling and handling parts. Able to use and learn/interpret various gauges, meters, and other instrumentation. Attentive to their work and workspace to see, notify, and/or prevent UVC. Requirements Have a basic level of computer literacy. Is manually dexterous and works well with small hand-held parts. Be able to view parts through a microscope Be detail-oriented Able to work individually and in team settings as required. Can read Engineering blueprints, work instructions, and other relevant documents that are written in English. A background check and drug screen are contingent upon hiring The responsibilities and requirements listed above are representative of the knowledge, skill, and/or ability required. Business Overview: Valve Research & Manufacturing Co. is an industry leader in high-precision valve manufacturing for military and commercial aerospace and oceanographic applications. EEO Statement: Valve Research & Manufacturing Company believes that all persons are entitled to equal employment opportunities and does not discriminate against its employees or applicants because of such individua's race, color, religion, sex (including gender), sexual orientation, national origin, ancestry, age, martial status, disability, veteran status, genetic information, or any other basis prohibited by federal, state, or local law. Equal employment opportunity will be extended to all persons in all aspects of Valve Research & Manufacturing company-employee relationship, including recruitment, employment, training, promotion, transfer, corrective action, working condition, compensation, employee benefits, layoff, and termination. You should be proficient in: GD&T Electrical Schematics Soldering Mechanical Assembly Skills Engineering Degree High School / GED Experience in a Manufacturing Environment Blueprint Reading Basic Computer Skills Machines & technologies you'll use: Industrial/Parts Washing Systems Heat Gun 2D Drawings Multimeter (Fluke, Klein Tools) Power Tools (Makita, Black+Decker) Measurement Gauges Industrial Robot

Full-time Description We are seeking a hands-on and detail-oriented Production Technician to join our team. This role is responsible for assembling, testing, and troubleshooting Watermaker systems and components in a production environment. The ideal candidate has mechanical aptitude, follows precise instructions, and thrives in a fast-paced, quality-driven setting. You will collaborate with internal teams to ensure timely and accurate builds that meet our company's high standards. Production Responsibilities: Assemble complete Watermaker systems and sub-assemblies in accordance with engineering drawings, wiring diagrams, and schematics. Conduct in-process and final quality control inspections, including full system testing prior to shipment. Ensure the production area remains clean, organized, and compliant with safety protocols Accurately package and label systems for domestic and international shipment. Support inventory control by tracking components, reporting shortages, and assisting with material handling. Collaborate with the engineering and service teams to identify and resolve assembly issues Requirements Qualifications: Technical degree or vocational training preferred; High school diploma or equivalent 1-3 years' experience in mechanical, electrical, or marine systems. Strong mechanical aptitude with basic plumbing and electrical knowledge. Ability to read technical diagrams, schematics, and wiring diagrams. Comfortable using hand tools, power tools, and testing instruments. Valid driver's license and ability to travel locally or occasionally overnight Excellent communication and problem-solving skills. Able to lift up to 50 lbs. and work in tight or elevated spaces.

CDL / Box Truck Drivers wanted for a Home Delivery Independent Contractor opening! SE independent is looking for dedicated Owner-Operator/Independent Contractors to manage their own businesses within a local region/delivery market. Successful candidates will be expected to perform home deliveries and set up of new furniture and accessories for the customer base of a premier national furniture retailer. While having an opportunity to be home every evening, a successful Independent Contractor can potentially generate $100-150k+ in annual gross revenue. Home Daily, Local Routes Day shift hours Outstanding earnings potential $140,000+ annually Deliver furniture to customers and businesses 1099 position, Owner Operator Must have one FULL year of experience with your CDL Additional perks of CDL drivers with SEIDS Weekly settlements Direct deposit Work Description: Physically delivering furniture into customer's home Use a dispatch app, interact with customers, product handling & assembly, communicate as needed with dispatch/company representatives CDL Class A 1+ Years of verifiable commercial driving experience or 80 hours of training Must own Single Axle Day cab tractor Background check Driving test DOT Required drug and physical No recent DUI/DWI- 5 years No more than 6 points on MVR

Join Barfield and Become a Part of the Adventure! If you are a talented Assembler professional interested in working in the exciting field of aviation, Barfield wants you! Barfield is more than just a prestigious name in the industry : it is subsidiary of Air France Industries KLM Engineering We are looking to hire a dedicated Assembler to join our team. The Assembler will support our GSE Manufacturing job summary Assemble fabricated parts to small subassemblies and complete units. Your day to day will consist of: Assembles fabricated parts to small subassemblies and complete units. Tests and calibrates parts and mechanisms to meet tolerances and product specifications. Perform other duties as assigned. Comply with safety policies; practices; procedures. Works under general supervision; typically reports to a lead person, supervisor, or manager. Your background matches the role: Positive attitude and problem solving skills Understand, read, and write English Basic Math Dexterity Repetitive work You possess a successful track record as: HS diploma or its equivalent Work the bench Familiar with hand tools and soldering tools Communication, organization skills Participate in proactive team efforts to achieve departmental and company goals. You embody our values: CUSTOMER FOCUS We strive to provide the best services to our customers. INTEGRITY We are personally accountable for the highest standards of ethical behavior. TEAMWORK We are committed to a teamwork environment. ADAPTABILITY In an ever-changing world, we are adaptable to the required challenges. We offer a comprehensive total compensation and benefits package. For more information about us, please visit our website at ******************* Barfield is an equal opportunity employer. Equal Employment Opportunity is the Law. This law requires Barfield to post a notice describing the Federal laws prohibiting job discrimination. For information regarding your legal rights and protections, please click on the following link: Know Your Rights As a Federal Contractor, Barfield is required to participate in the E-Verify Program to confirm eligibility to work in the United States. For information please click on the following link: E-Verify. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status.

Essential Duties and Accountabilities Ensures all components are correct in size, color and order. Enters data into the computer system. Scans ballistic panel barcode and plate. Verifies accuracy of ballistic and information. Assembles the ballistic following the process steps according to work order specifications. Prints packaging slips. Inserts carrier assembly into the plastic bag, paste label and puts carrier in box. Closes the box with tape and inserts the packaging list into the envelope. Performs a visual inspection for accuracy. Weighs the box and enter the information into the system. Prints the shipping label and tracking and pastes onto box. Confirms label matches the information in the system. Places the completed box on pallet. Diligently attends to details and pursues quality in accomplishing tasks. Responsible for working according to the company's safety and quality standards. Maintains a safe and clean work area. Performs other related duties as required and or as assigned.

Requisition No: 860473 Agency: Department of Corrections Working Title: Engineering Technician IV - Statewide Pay Plan: Career Service Position Number: 70066666 Salary: $62,456.94 - $67,316.86 annually Posting Closing Date: 04/01/2026 Total Compensation Estimator Tool FLORIDA DEPARTMENT OF CORRECTIONS We Never Walk Alone Engineering Technician IV - WWTP This open competitive advertisement is for a Career Service position located at various Correctional Institutions in the Maintenance Department statewide. The mission of Facilities Management and Building Construction at the Florida Department of Corrections is to provide a safe, secure, and efficient environment for staff, inmates, and visitors. This is achieved through the effective management, maintenance, and construction of correctional facilities, ensuring they meet all regulatory standards and support the department's overall mission of public safety and rehabilitation. This position is not a telework position and is required to report to the FDC office in the area it serves. JOB DUTIES: This working position is responsible for the Waste/Wastewater Treatment Plant at a Correctional Institution both in operations and maintenance. This position also instructs inmates in the special skills necessary to operate a Water and Wastewater Treatment Plant through an apprentice on-the-job training program designed to develop experience and skills necessary to assume and fulfill the position of Operator of a water or sewer utility. * Operates and maintains Water Treatment and Wastewater Treatment Plants in compliance with DEP permits and regulations. * Conducts preventive maintenance for both plants, orders, and stocks necessary chemicals. * Repairs breakdowns at the operator level and troubleshoots specialized equipment such as compressors, pumps, air blowers, and chlorinators. * Cleans bar screens, grit chambers, settling, and sludge beds, and performs various water quality tests. * Prepares operational reports, maintains logs, and supervises inmates, preparing progress reports for their rehabilitation. BENEFITS: * Paid vacation, sick leave, and holidays. * Comprehensive health insurance and life insurance with accidental death and dismemberment benefits. * Supplemental Dental, Vision, Life, Disability and Hospitalization insurance. * Tuition-Free college courses. * Retirement Plans with the Florida Retirement System: * Pension Plan (Traditional Retirement Pension Plan) * Investment Plan (401(K)-Type Retirement Plan) * Deferred Retirement Option Program (Drop) * Deferred Compensation * Recently Retired? Beginning July 1, 2024, there is no longer a reemployment limitation; beginning with the 7th calendar month from the member's distribution date, there are no restrictions on working for an FRS employer. You will not be required to repay any prior distributions, and you may continue receiving distributions from the Investment Plan or Pension Plan without interruption. REQUIREMENTS: * A Class C Water and/ or Wastewater Treatment Plant Operator License or higher * A Valid Class E Driver's License Support of knowledge, skills, and abilities should be demonstrated on the application, in the education, in the work experience, in the work sample, in the interview and/or during reference checks. ADDITIONAL INFORMATION: BACKGROUND SCREENING REQUIREMENT The Florida Department of Corrections requires all job applicants and volunteers to pass a Level 2 background check as per Chapter 435, Florida Statutes. This check must be completed before they can start working or volunteering. EMPLOYMENT ELIGIBILITY The Florida Department of Corrections (FDC) only hires U.S. citizens and those authorized to work in the U.S. FDC uses E-Verify to confirm an employee's eligibility to work after completing the I-9 form. For online application issues, call the People First Service Center at **************. Applications will be accepted until 11:59 PM EST on the closing date. The State of Florida is an Equal Opportunity Employer/Affirmative Action Employer, and does not tolerate discrimination or violence in the workplace. Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify the agency hiring authority and/or People First Service Center (***************. Notification to the hiring authority must be made in advance to allow sufficient time to provide the accommodation. The State of Florida supports a Drug-Free workplace. All employees are subject to reasonable suspicion drug testing in accordance with Section 112.0455, F.S., Drug-Free Workplace Act. VETERANS' PREFERENCE. Pursuant to Chapter 295, Florida Statutes, candidates eligible for Veterans' Preference will receive preference in employment for Career Service vacancies and are encouraged to apply. Certain service members may be eligible to receive waivers for postsecondary educational requirements. Candidates claiming Veterans' Preference must attach supporting documentation with each submission that includes character of service (for example, DD Form 214 Member Copy #4) along with any other documentation as required by Rule 55A-7, Florida Administrative Code. Veterans' Preference documentation requirements are available by clicking here. All documentation is due by the close of the vacancy announcement. Location:

At Curaleaf, we're redefining the cannabis industry with a strong commitment to quality, expertise, and innovation. As a leading global cannabis provider, our brands-including Curaleaf, Select, and Grassroots-offer premium products and services in both medical and adult-use markets. Join us at Curaleaf to be part of a high-growth, purpose-driven company that champions corporate social responsibility through our Rooted in Good initiative, supporting community outreach and positive change. Here, you'll have the opportunity to make a meaningful impact, drive innovation, and help shape the future of cannabis. Production Technician Job Type: Full-Time; Non-Exempt Shift: Monday- Friday, 2:00 pm- 10:30 pm Hourly Rate: $15.00/hr. Location: Homestead, FL Who You Are: As a Production Technician, you will be responsible for the packaging and labeling of the finished goods at our cultivation and manufacturing centers. You will be responsible for the production of a variety of finished products including packaged, dried flower, pre-rolls, vape cartridges and vape pens, and infused products. Our production team is expected to maintain quality control measures to ensure high-quality products and will carry out day-to-day tasks including prepping, packaging, and labeling per standard operating procedures set by Curaleaf and our production management. What You Will Do: Stage product and packaging supplies across various production lines to meet daily production schedule Perform quality assurance protocols as designated by Curaleaf's procedures Increase operational efficiency and reduce waste through ownership, teamwork, communication and collaboration Perform in-process and post-process quality assurance, testing and conducting visual inspections to ensure all product meets or exceed Curaleaf's specifications and patient's expectations Ensure 100% compliance involving proper weighing, data recording, product tracking and security throughout the entire packaging process Operate in an efficient manner that also complies with all OSHA regulations, Curaleaf SOP's and all applicable required procedures Ensure each product is properly labeled in compliance with state regulations Work in a quick and efficient manner and strive to consistently increase productivity Maintain the organization and cleanliness of the extraction room while performing all duties What You Will Bring: High School Diploma or G.E.D minimum Effective communication skills working in a team-based environment Strong attention to detail skills working in a high-volume production environment Strong work ethic and the ability to be punctual, reliable, and contribute to a positive, professional work environment Ability to be trained on various production equipment, SOPs, and consistently meet performance expectations set by leadership Ability to perform repetitive tasks for long periods of time Even Better If: You have one year of manufacturing and packaging experience with a focus on ensuring product safety, consumer safety and satisfaction, and high product quality is strongly preferred Physical Requirements: Allergen warnings, potential exposure to dust, pollen, and plant pathogens. Exposure to cleaning solvents, such as high volumes of isopropyl alcohol. Daily use of provided PPE, such as masks, hair nets, beard covers, respirators, boot covers, scrubs, non-slip shoes, and Tyvek suits as necessary. Ability to work in confined spaces Exposure to loud noises, including but not limited to air compressors, packaging equipment, and alarms. Exposure to CO2 manufacturing procedures at OSHA approved CO2 levels. High-stress tolerance, adaptable, flexible ability to work in an ever-changing environment Curaleaf Pay Transparency $15 - $15 USD What We Offer: Career Growth Opportunities Competitive Pay and Benefits Generous PTO and Parental Leave 401(K) Retirement Plan Life/ Disability Insurance Community Involvement Referral Bonuses and Product Discounts Benefits vary by state, role type, and eligibility. Follow us on Social Media: Instagram: @curaleaf.usa Twitter: @Curaleaf_Inc LinkedIn: Curaleaf LinkedIn Curaleaf Holdings, Inc. (TSX: CURA) (OTCQX: CURLF) ("Curaleaf") is a leading international provider of consumer products in cannabis with a mission to enhance lives by cultivating, sharing, and celebrating the power of the plant. As a high-growth cannabis company known for quality, expertise and reliability, the Company, and its brands, including Curaleaf, Select, Grassroots, JAMS, Find and Zero Proof provide industry-leading service, product selection and accessibility across the medical and adult-use markets. Curaleaf International is the largest vertically integrated cannabis company in Europe with a unique supply and distribution network throughout the European market, bringing together pioneering science and research with cutting-edge cultivation, extraction, and production. Home | Curaleaf | Cannabis with Confidence Our Vision: To be the world's leading cannabis company by consistently delivering superior products and services and driving the global acceptance of cannabis. Our Values: Lead and Inspire. Commit to Win. ONE Curaleaf. Driven to Deliver Excellence. Curaleaf is an equal opportunity employer. Curaleaf recruits, employs, trains, compensates, and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status, and other protected status as required by applicable law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Individuals adversely impacted by the war on drugs are encouraged to apply. Current Curaleaf employees should apply for open positions through our Internal Job Board, which can be accessed via the link on The Leaf.

Assemble manufactured materials and components. Ensure quality in assembled products including accuracy of BOM for assembly and that the assembly itself meets all design specifications. * Reads, interprets and follows blueprints, diagrams, engineering drawings, specifications, bills of materials, and other written instructions. * Operates hand tools, electrical tools, hand cutters, measuring equipment and light equipment. * Maintains inventory of product in work stations. * Performs quality work checks, identifies product defects and records identified defects. * Reworks and/or repairs assembled equipment and products according to engineering specification changes. * Performs all work in accordance with quality standards and established safety procedures. Job Requirements: * Maintains a clean and safe work area. * Ability to lift up to 40 lbs. * Must be able to work in a standing position up to 8 hours per day Minimum education requirement: * HS Diploma. Years of experience: * 1 year Citizenship Requirement: * US Citizen, US Person (Green Card Holder) or Foreign National w/ Right to Work in US Benefits Provided: * 401K * Medical, dental and vision * Sick time as applicable to state law Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices. Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at accommodations@butler.com.

Job Description Braman Miami is looking for Ceramic Coating Technicians. This is your opportunity to work with a company that has been trusted in the South Florida community for over 50 years. The Ceramic Coating Technician is a hands-on role that requires attention to detail and a passion for delivering high-quality results. Responsibilities: Surface Preparation: Thoroughly clean and decontaminate vehicle surfaces to ensure optimal adhesion of ceramic coatings. Application: Apply ceramic coatings using proper techniques and equipment to achieve even coverage and a smooth finish. Quality Control: Inspect coated surfaces for imperfections, ensuring high-quality results and customer satisfaction. Customer Service: Communicate effectively with customers to understand their needs and provide recommendations for ceramic coating services. Maintenance: Educate customers on proper maintenance procedures to prolong the lifespan of ceramic coatings and preserve the vehicle's appearance. Safety: Adhere to safety protocols and regulations to maintain a safe working environment. Requirements: - Previous experience in ceramic coating is required! - Strong customer service skills with the ability to communicate effectively with customers and team. - Attention to detail and the ability to deliver high-quality results. - Valid driver's license with a clean driving record. - Ability to work in a fast-paced environment and prioritize tasks effectively. - Knowledge of custodial practices and cleaning techniques is a plus. Benefits: Medical, dental and vision plan. 401(k) savings plan. Accident & critical illness insurance. Paid vacation. Employee Lease programs and much more. Shop Type: Dealership Work Remotely No Powered by JazzHR mTutZNz3s0

Job DescriptionAbout Us At The Pharmacy Hub, we collaborate with pharmaceutical brands, manufacturers, health brands, telemedicine providers, and healthcare companies to deliver essential products directly to patients. Our expertise allows us to seamlessly distribute pharmaceuticals, medical devices, and other healthcare products to consumers, ensuring greater accessibility and convenience. Core Values The Pharmacy Hub is dedicated to breaking barriers in healthcare by championing access, intervention and affordability. Customer-first mindset - we develop strong partnerships with telehealth platforms and healthcare companies to enhance access and understand their specific needs Innovation for intervention in care - we develop advanced compounding solutions and products to better support patient health outcomes Continuous improvement - we continuously improve our processes and offerings through intelligent, honest and transparent practices to deliver cost-effective solutions that truly benefit our clients and their patients. You will play a pivotal role in maintaining these values and contributing to the company's mission of redefining healthcare delivery through superior pharmacy services. Job Summary The Mechanical Assembler within our pharmacy maintenance department specializes in assembling, installing, and maintaining the mechanical systems that are critical to our mail-order operations. This role focuses on the precise fabrication and repair of conveyor systems, automated packaging machinery, and other industrial equipment that ensures the accurate and timely processing and shipping of pharmaceutical products. Key Responsibilities Assemble, install, and maintain mechanical components of conveyor systems, packaging machines, labeling equipment, and other automation used in the pharmacy fulfillment process. Read and interpret mechanical schematics, blueprints, and layout plans to perform precise assembly and modifications to existing equipment. Use hand tools (e.g., wrenches, screwdrivers) and power tools (e.g., drills, grinders) to fit, align, and adjust parts, ensuring proper function and minimal vibration. Perform preventative maintenance tasks, including the disassembly and reassembly of machinery for cleaning, lubrication, and part replacement. Collaborate with Maintenance Technicians and Electro-Mechanical teams to troubleshoot and resolve mechanical issues that cause production stoppages. Conduct basic operational tests on assembled or repaired equipment to verify performance before returning it to the production floor. Fabricate simple replacement parts or brackets as needed using available materials and tools. Maintain accurate records of work performed, parts used, and time spent on assembly and maintenance tasks, following Good Documentation Practices (GDP). Adhere strictly to all safety protocols, Standard Operating Procedures (SOPs), and compliance regulations specific to a pharmaceutical maintenance environment. Keep the maintenance workshop and assembly areas clean, organized, and safe, properly storing all tools and components. Qualifications High school diploma or equivalent (GED). A technical certificate or apprenticeship in mechanical assembly, industrial maintenance, or a related field is preferred. 2+ years of experience in a mechanical assembly role, preferably within a manufacturing, distribution, or packaging environment. Basic English with the ability to read and write. Skills & Abilities: Strong understanding of mechanical concepts (gears, bearings, drives, pneumatics) and the ability to work with complex machinery. Proficiency in reading and interpreting mechanical drawings and schematics. Skilled and safe use of a wide array of hand tools, power tools, and precision measuring instruments (calipers, micrometers). Meticulous approach to ensure all assemblies meet exact specifications for a high-reliability operation. Ability to diagnose the root cause of mechanical failures and implement effective assembly or repair solutions. Understanding of the importance of working in a regulated (cGMP) environment and following detailed procedures. Capable of standing, bending, and lifting up to 50 pounds; comfortable working in an industrial setting. What We Offer Competitive salary. Quarterly bonus program based on productivity and efficiency. Flexible scheduling options (including evenings/weekends as needed). Opportunities for growth in a rapidly expanding telepharmacy practice. Collaborative and innovative work environment focused on patient safety and compliance. Location: Fort Lauderdale, FL Shifts: DBT This is a 100% onsite role; remote or hybrid work is not available Pay Range$17-$26 USD Benefits: 401(k) with up to 4% matching Medical, dental, vision and life insurance Paid time off Paid public holidays At The Pharmacy Hub, we don't just offer jobs-we offer opportunities for career growth and development. We take pride in our fast-paced, team-driven culture and are committed to supporting our employees in achieving success. If you're ready to join a company that values hard work, dedication, and teamwork, apply today! We look forward to welcoming you to The Pharmacy Hub and working together to deliver top-tier pharmacy fulfillment solutions.

Gaumard is looking for talented individuals like you! Assemblers perform tasks that are necessary to the production process. They aid in the fabrication, maintenance, and repair of component parts and products. This role carefully follows assembly instructions and correctly places and attaches parts to create sub-assemblies or finished products. The person filling this position will have familiarity with working in a production environment and will be required to follow detailed instructions. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. SUPERVISION RECEIVED AND EXERCISED: Receives direct supervision from the Team Lead, and indirect supervision from the Department Manager. Does not exercise supervision over any other position. This position is located in Building 2 - Lo Fi Production Department. DUTIES AND RESPONSIBILITIES: Follow detailed instructions to prepare parts for assembly according to procedures and guidelines. Operate equipment necessary to produce materials and products. Perform quality checks on products and parts. Count finished products to determine if product orders are complete. Effectively communicate manufacturing, material, or equipment issues to supervising personnel. Work cooperatively with the assembly team to meet quotas and goals. Assist other technical department personnel as required. Make every effort to increase productivity and efficiency without compromising quality. Perform routine area and equipment cleaning. Perform related duties as assigned Other duties as necessary QUALIFICATIONS/REQUIREMENTS: Education: high school diploma or its equivalent. An individual with an assembly background is preferred. Experience in a production and manufacturing environment preferred. Excellent manual dexterity and fine motor skills. Able to follow detailed written and oral instructions. Must be efficient and careful not to damage items. Good organizational skills with strong attention to detail and the ability to organize items. PHYSICAL/MENTAL REQUIREMENTS: Excellent manual dexterity and fine motor skills. Frequent use of the arms, hands, and fingers is required to perform functions such as reaching, grabbing, pinching, picking, holding, and turning. Frequent use of hand and power tools weighing up to 15lbs. The employee is interchangeably required to sit, stand, and walk during their shift. Employees may be required to bend, stoop or kneel to grab supplies and or materials The employee must be able to lift, carry, push, or pull or move objects across the production floor, weighing up to 40 pounds with or without reasonable accommodation. The employee may be required to reach at or below shoulder level and reach overhead for short to moderate periods. Must be able to hear, understand, and distinguish sounds and speak clearly. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WHAT YOU'LL GET WHEN YOU JOIN THE GAUMARD FAMILY: Competitive Pay Full health benefits (medical, vision, dental) Paid Time Off (PTO) 11 Paid Holidays Retirement plan with 100% employer match up to 5% of employee's contribution Satisfaction knowing that you have joined a long-standing company Hours: Monday to Friday 8:00 AM to 4:30 PM must be willing and able to work some Saturdays or stay beyond scheduled shift if needed to meet business demands. The above supersedes all previous descriptions. This job description is intended to be a tool to describe the primary purpose of the job and the KEY duties and responsibilities. This description does not state or imply that the functions listed above are the only tasks to be performed by the employee occupying this position. Management has the right to add to or change the job responsibilities at any time. Equal Employment Opportunity Statement: Gaumard Scientific is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: Gaumard Scientific is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Gaumard Scientific are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Gaumard Scientific will not tolerate discrimination or harassment based on any of these characteristics. Gaumard Scientific encourages applicants of all ages. Gaumard Scientific will provide reasonable accommodation to employees who have protected disabilities consistent with local law.

CDL / Box Truck Drivers wanted for a Home Delivery Independent Contractor opening! SE independent is looking for dedicated Owner-Operator/Independent Contractors to manage their own businesses within a local region/delivery market. Successful candidates will be expected to perform home deliveries and set up of new furniture and accessories for the customer base of a premier national furniture retailer. While having an opportunity to be home every evening, a successful Independent Contractor can potentially generate $100-150k+ in annual gross revenue. Home Daily, Local Routes Day shift hours Outstanding earnings potential $140,000+ annually Deliver furniture to customers and businesses 1099 position, Owner Operator Must have one FULL year of box truck driving experience - OR - CDL A or B Additional perks of Box truck / CDL drivers with SEIDS Weekly settlements Direct deposit Work Description: Physically delivering furniture into customer's home Use a dispatch app, interact with customers, product handling & assembly, communicate as needed with dispatch/company representatives CDL Class A 1+ Years of verifiable commercial driving experience or 80 hours of training Must own Single Axle Day cab tractor Background check Driving test DOT Required drug and physical No recent DUI/DWI- 5 years No more than 6 points on MVR

Job Type: Full-Time; Non-Exempt Shift: Monday- Friday, 2:00 pm- 10:30 pm Hourly Rate: $15.00/hr. Who You Are: As a Production Technician, you will be responsible for the packaging and labeling of the finished goods at our cultivation and manufacturing centers. You will be responsible for the production of a variety of finished products including packaged, dried flower, pre-rolls, vape cartridges and vape pens, and infused products. Our production team is expected to maintain quality control measures to ensure high-quality products and will carry out day-to-day tasks including prepping, packaging, and labeling per standard operating procedures set by Curaleaf and our production management. What You Will Do: * Stage product and packaging supplies across various production lines to meet daily production schedule * Perform quality assurance protocols as designated by Curaleaf's procedures * Increase operational efficiency and reduce waste through ownership, teamwork, communication and collaboration * Perform in-process and post-process quality assurance, testing and conducting visual inspections to ensure all product meets or exceed Curaleaf's specifications and patient's expectations * Ensure 100% compliance involving proper weighing, data recording, product tracking and security throughout the entire packaging process * Operate in an efficient manner that also complies with all OSHA regulations, Curaleaf SOP's and all applicable required procedures * Ensure each product is properly labeled in compliance with state regulations * Work in a quick and efficient manner and strive to consistently increase productivity * Maintain the organization and cleanliness of the extraction room while performing all duties What You Will Bring: * High School Diploma or G.E.D minimum * Effective communication skills working in a team-based environment * Strong attention to detail skills working in a high-volume production environment * Strong work ethic and the ability to be punctual, reliable, and contribute to a positive, professional work environment * Ability to be trained on various production equipment, SOPs, and consistently meet performance expectations set by leadership * Ability to perform repetitive tasks for long periods of time Even Better If: * You have one year of manufacturing and packaging experience with a focus on ensuring product safety, consumer safety and satisfaction, and high product quality is strongly preferred Physical Requirements: * Allergen warnings, potential exposure to dust, pollen, and plant pathogens. * Exposure to cleaning solvents, such as high volumes of isopropyl alcohol. * Daily use of provided PPE, such as masks, hair nets, beard covers, respirators, boot covers, scrubs, non-slip shoes, and Tyvek suits as necessary. * Ability to work in confined spaces * Exposure to loud noises, including but not limited to air compressors, packaging equipment, and alarms. * Exposure to CO2 manufacturing procedures at OSHA approved CO2 levels. * High-stress tolerance, adaptable, flexible ability to work in an ever-changing environment

Requisition No: 860473 Agency: Department of Corrections Working Title: Engineering Technician IV - Statewide Pay Plan: Career Service Position Number: 70066666 Salary: $62,456.94 - $67,316.86 annually Posting Closing Date: 04/01/2026 Total Compensation Estimator Tool FLORIDA DEPARTMENT OF CORRECTIONS We Never Walk Alone Engineering Technician IV - WWTP This open competitive advertisement is for a Career Service position located at various Correctional Institutions in the Maintenance Department statewide. The mission of Facilities Management and Building Construction at the Florida Department of Corrections is to provide a safe, secure, and efficient environment for staff, inmates, and visitors. This is achieved through the effective management, maintenance, and construction of correctional facilities, ensuring they meet all regulatory standards and support the department's overall mission of public safety and rehabilitation. This position is not a telework position and is required to report to the FDC office in the area it serves. JOB DUTIES: This working position is responsible for the Waste/Wastewater Treatment Plant at a Correctional Institution both in operations and maintenance. This position also instructs inmates in the special skills necessary to operate a Water and Wastewater Treatment Plant through an apprentice on-the-job training program designed to develop experience and skills necessary to assume and fulfill the position of Operator of a water or sewer utility. * Operates and maintains Water Treatment and Wastewater Treatment Plants in compliance with DEP permits and regulations. * Conducts preventive maintenance for both plants, orders, and stocks necessary chemicals. * Repairs breakdowns at the operator level and troubleshoots specialized equipment such as compressors, pumps, air blowers, and chlorinators. * Cleans bar screens, grit chambers, settling, and sludge beds, and performs various water quality tests. * Prepares operational reports, maintains logs, and supervises inmates, preparing progress reports for their rehabilitation. BENEFITS: * Paid vacation, sick leave, and holidays. * Comprehensive health insurance and life insurance with accidental death and dismemberment benefits. * Supplemental Dental, Vision, Life, Disability and Hospitalization insurance. * Tuition-Free college courses. * Retirement Plans with the Florida Retirement System: * Pension Plan (Traditional Retirement Pension Plan) * Investment Plan (401(K)-Type Retirement Plan) * Deferred Retirement Option Program (Drop) * Deferred Compensation * Recently Retired? Beginning July 1, 2024, there is no longer a reemployment limitation; beginning with the 7th calendar month from the member's distribution date, there are no restrictions on working for an FRS employer. You will not be required to repay any prior distributions, and you may continue receiving distributions from the Investment Plan or Pension Plan without interruption. REQUIREMENTS: * A Class C Water and/ or Wastewater Treatment Plant Operator License or higher * A Valid Class E Driver's License Support of knowledge, skills, and abilities should be demonstrated on the application, in the education, in the work experience, in the work sample, in the interview and/or during reference checks. ADDITIONAL INFORMATION: BACKGROUND SCREENING REQUIREMENT The Florida Department of Corrections requires all job applicants and volunteers to pass a Level 2 background check as per Chapter 435, Florida Statutes. This check must be completed before they can start working or volunteering. EMPLOYMENT ELIGIBILITY The Florida Department of Corrections (FDC) only hires U.S. citizens and those authorized to work in the U.S. FDC uses E-Verify to confirm an employee's eligibility to work after completing the I-9 form. For online application issues, call the People First Service Center at **************. Applications will be accepted until 11:59 PM EST on the closing date. The State of Florida is an Equal Opportunity Employer/Affirmative Action Employer, and does not tolerate discrimination or violence in the workplace. Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify the agency hiring authority and/or People First Service Center (***************. Notification to the hiring authority must be made in advance to allow sufficient time to provide the accommodation. The State of Florida supports a Drug-Free workplace. All employees are subject to reasonable suspicion drug testing in accordance with Section 112.0455, F.S., Drug-Free Workplace Act. VETERANS' PREFERENCE. Pursuant to Chapter 295, Florida Statutes, candidates eligible for Veterans' Preference will receive preference in employment for Career Service vacancies and are encouraged to apply. Certain service members may be eligible to receive waivers for postsecondary educational requirements. Candidates claiming Veterans' Preference must attach supporting documentation with each submission that includes character of service (for example, DD Form 214 Member Copy #4) along with any other documentation as required by Rule 55A-7, Florida Administrative Code. Veterans' Preference documentation requirements are available by clicking here. All documentation is due by the close of the vacancy announcement. Location: