Assembly technician jobs in Fort Lauderdale, FL - 238 jobs

The Senior Electro-Mechanical Assembler is required to assemble, inspect and perform acceptance testing on complex electro-mechanical and hydraulic systems. To accomplish this effectively, the Senior Electro-Mechanical Assembler must work independently from: engineering drawings, engineering changes, bills of material, work instructions, test procedures and production schedules. The Senior Electro-Mechanical Assembler is also required to fault isolate manufacturing or workmanship defects and initiate corrective action. Responsibilities and Tasks: Perform all required electro-mechanical or hydraulic assembly, alignment or calibration of subassembly or system level hardware. This activity will be accomplished in accordance with engineering drawings, schematics, work instructions and quality standards May work directly with test engineering, fault isolate and repair warranty or customer-owned product in a repair depot environment using customer supplied failure reports, engineering drawings or repair manuals as a general guide Set up test equipment to perform acceptance inspection to assure compliance with drawing and contractual requirements Perform required acceptance testing in accordance with approved Acceptance Test Procedures or other engineering documents with Engineering assistance, if necessary. Perform basic diagnostics and fault isolation, as necessary Implement corrective action to improve product reliability May be required to use and operate test equipment and complex tools and fixtures Using a computer, assist in preparing assembly, alignment or repair work instructions Identify and participate in the development of special tooling and subsequent production proof Must be able to perform all subordinate tasks required to accomplish the above duties and perform other related duties as required Maintain accurate logs and records Responsible for the safe handling and disposal of hazardous materials and waste Assist other employees in learning new duties as assigned Education, Experience & License or Certification: High school diploma or equivalent and 3-5 years' experience in manufacturing complex electro-mechanical subassemblies, major assemblies and systems Must be capable of working independently from engineering drawings, schematics, performance specifications, quality standards and customer repair orders Intermediate-level computer operations skills required for access to technical data or other required documents Experience assembling and testing hydraulic systems is highly preferred #LI-HA1

Gaumard is looking for talented individuals like you! Assemblers perform tasks that are necessary to the production process. They aid in the fabrication, maintenance, and repair of component parts and products. This role carefully follows assembly instructions and correctly places and attaches parts to create sub-assemblies or finished products. The person filling this position will have familiarity with working in a production environment and will be required to follow detailed instructions. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. SUPERVISION RECEIVED AND EXERCISED: Receives direct supervision from the Team Lead, and indirect supervision from the Department Manager. Does not exercise supervision over any other position. This position is located in Building 2 - Lo Fi Production Department. DUTIES AND RESPONSIBILITIES: Follow detailed instructions to prepare parts for assembly according to procedures and guidelines. Operate equipment necessary to produce materials and products. Perform quality checks on products and parts. Count finished products to determine if product orders are complete. Effectively communicate manufacturing, material, or equipment issues to supervising personnel. Work cooperatively with the assembly team to meet quotas and goals. Assist other technical department personnel as required. Make every effort to increase productivity and efficiency without compromising quality. Perform routine area and equipment cleaning. Perform related duties as assigned Other duties as necessary QUALIFICATIONS/REQUIREMENTS: Education: high school diploma or its equivalent. An individual with an assembly background is preferred. Experience in a production and manufacturing environment preferred. Excellent manual dexterity and fine motor skills. Able to follow detailed written and oral instructions. Must be efficient and careful not to damage items. Good organizational skills with strong attention to detail and the ability to organize items. PHYSICAL/MENTAL REQUIREMENTS: Excellent manual dexterity and fine motor skills. Frequent use of the arms, hands, and fingers is required to perform functions such as reaching, grabbing, pinching, picking, holding, and turning. Frequent use of hand and power tools weighing up to 15lbs. The employee is interchangeably required to sit, stand, and walk during their shift. Employees may be required to bend, stoop or kneel to grab supplies and or materials The employee must be able to lift, carry, push, or pull or move objects across the production floor, weighing up to 40 pounds with or without reasonable accommodation. The employee may be required to reach at or below shoulder level and reach overhead for short to moderate periods. Must be able to hear, understand, and distinguish sounds and speak clearly. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WHAT YOU'LL GET WHEN YOU JOIN THE GAUMARD FAMILY: Competitive Pay Full health benefits (medical, vision, dental) Paid Time Off (PTO) 11 Paid Holidays Retirement plan with 100% employer match up to 5% of employee's contribution Satisfaction knowing that you have joined a long-standing company Hours: Monday to Friday 8:00 AM to 4:30 PM must be willing and able to work some Saturdays or stay beyond scheduled shift if needed to meet business demands. The above supersedes all previous descriptions. This job description is intended to be a tool to describe the primary purpose of the job and the KEY duties and responsibilities. This description does not state or imply that the functions listed above are the only tasks to be performed by the employee occupying this position. Management has the right to add to or change the job responsibilities at any time . Equal Employment Opportunity Statement: Gaumard Scientific is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: Gaumard Scientific is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Gaumard Scientific are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Gaumard Scientific will not tolerate discrimination or harassment based on any of these characteristics. Gaumard Scientific encourages applicants of all ages. Gaumard Scientific will provide reasonable accommodation to employees who have protected disabilities consistent with local law.

FHP Manufacturing, located in Fort Lauderdale, Florida, is a joint venture between Robert Bosch (BOSCH Group) and Carrier Corporation. FHP Manufacturing is a leader in the production of geothermal and water source heat pumps, providing some of the most efficient heating and cooling comfort solutions in the industry. Job Description We are seeking a skilled and detail-oriented Assembly Line/Test Associate. This position plays a key role in assembling and troubleshooting failures of heat pumps & test equipment. The ideal candidate will have strong technical ability and a commitment to precision, safety, and quality in a fast-paced production environment. For Associates working on the assembly line, tasks include but are not limited to: Safety & Compliance: Adhere to all company safety absolute and PPE requirements. Maintain a clean and organized work area. Train or assist in training operators of run off stations to ensure tests are being properly performed, help to identify and resolve improvement opportunities and gaps with training First escalation point of contact for testing and programming operations: Leak Test, Final Run Test, Motor Programming, and Controller Programming Teamwork: Assist with training new Qualifications Ability to read and apply work instructions, follow directions, understand and execute safety and quality procedures. Must be flexible to work in other departments when requested. Must be able to work overtime when requested. Must be able to speak, read and write English. Manufacturing experience in assembly and/or troubleshooting skills Required: High School Diploma or equivalent. Additional Information All your information will be kept confidential according to EEO guidelines. Equal Opportunity Employer, including disability / veterans.

Landing Gear Technologies (LGT) is an FAA-Certified Repair Station specializing in the repair and overhaul of aircraft landing gears and components. We believe our organization can only be as good as the employees that stand behind it. In this constantly growing industry, we are always seeking talented and dedicated individuals to join our team. We are looking for a Landing Gear Assembly Technician to support the final assembly and build-up of aircraft landing gear components and assemblies. This position focuses on the precise reassembly and testing of overhauled or repaired parts, ensuring they meet OEM and FAA standards for quality and airworthiness. Duties and Responsibilities: · Perform final assembly and build-up of landing gear components, subassemblies, and full assemblies per OEM Component Maintenance Manuals (CMMs) and work instructions. · Install seals, O-rings, hardware, bushings, bearings, and fittings using appropriate tools and calibrated equipment. · Torque hardware to specified values and record all critical measurements and readings. · Ensure proper alignment, fitment, and functionality of all parts during assembly. · Perform hydraulic shock strut test, gap checks, and other test as required. · Collaborate with Quality teams to complete in-process and final inspections. · Tag and prepare completed assemblies for shipment or return to customer. · Maintain accurate records of work performed, including parts used, serial numbers, and inspection results. · Follow all safety guidelines and ensure a clean and organized work area. · Support continuous improvement initiatives and process consistency within the assembly area. Qualifications: · High school diploma or equivalent required; technical school or A&P license a plus. · 2+ years of experience in mechanical assembly, preferably in aerospace or MRO. · Proficient with hand tools, torque wrenches, hydraulic presses, and alignment tools. · Ability to interpret and follow CMMs, blueprints, and detailed work instructions. · Strong mechanical aptitude and high attention to detail. · Familiarity with FAA Part 145 repair station procedures is preferred. · Team player with strong communication and time management skills. Requirements Physical Requirements: · Ability to lift up to 50 lbs and stand for prolonged periods. · Good manual dexterity and hand-eye coordination. · Must be able to wear appropriate PPE and work in a shop environment. · Stand for long periods of time. · Must be able to hear, understand, and distinguish sounds and speak clearly. · Job Type: Full-time.

THIS POSITION REQUIRES TRAVEL IN AND AROUND THE SURROUNDING STATES. Must be willing and able to travel to various customer sites. Paid lodging along with per diem/daily stipend. Once fully trained (approx 1-2 weeks - paid) you'll be out on the road, traveling to and working at our customer sites. Travel time and scheduling needs may vary. Who We Are National Assemblers, Inc is family-owned and the largest retail assembly company in the world, with over 10 Million products assembled for our customers last year. We are the trusted provider to the world's largest brands like Amazon, Walmart, Lowes, Wayfair, Bass Pro Shop, and most importantly, to individual customers who trust us in their homes. We were awarded “Assembly Company of the Year” for 2022 all due to our hardworking technicians who have pride in all they do! We are also the fastest growing, with over 100 new management roles created and filled last year! If you have the will and the skill, we have the opportunities for you! Who You Are You love working with your hands to build products. You're the one all of your family and friends call to assemble their new bike or grill. You have an entrepreneurial spirit and like the benefits and backing of a W-2 organization. You enjoy independence and are self-motivated. Customer satisfaction and high quality is your top goal when working. You are reliable and have a proven attendance record with reliable transportation. You're not afraid of hard work and enjoy a good challenge. If this sounds like you, we would love you to join our NAI family! What You'll Do You'll build bikes, grills, furniture & anything our customer's request. You'll be working independently and will need your own reliable transportation to get to the store. You'll assemble the product to National Assembler's specifications You'll build a strong rapport with customers and ensure 100% satisfaction by delivering good customer service and quality product What's In it For You Piece-rate earnings (hard work results in high pay = unlimited earning potential) Top-notch training certification program with a guaranteed minimum (get paid to learn a trade!) Mileage Reimbursement Overtime Pay Weekly Pay Medical/Dental/Vision Insurance (Benefits begin after 60 days of employment) 401K W-2 Employee Travel opportunities A nationwide support staff who is focused on your personal development and success You'll Meet These Basic Job Requirements You must be able to lift 40 pounds You must have your own RELIABLE transportation This job requires regular driving to retail customers (most stores are within 15 to 75 miles of your home) You must have basic hand tools APPLY NOW to start building your future with us! National Assemblers, Inc is an equal opportunity employer and does not discriminate against otherwise qualified applicants on the basis of race, color, creed, religion, ancestry, age, sex, marital status, national origin, sexual orientation, disability or handicap, veteran status and any state and local protected status.

Immediately Hiring: Mechanical Assembler Company: Dayton-Granger, Inc. Industry: Aviation and Aerospace Component Manufacturing Shift: 1st Shift, Monday-Friday Full-Time , Direct Hire, Competitive Pay, Great Benefits, Work-Life Balance Position Overview: Dayton-Granger, Inc. is immediately hiring a reliable and hands-on Mechanical Assembler to join our 1st Shift team in Fort Lauderdale, FL. This is a full-time, direct-hire opportunity with a stable company that's been manufacturing quality parts for over 81 years. In this role, you'll use tools like drills, rivet guns, and calipers to assemble parts with precision and care. You'll follow detailed work instructions, ensure parts are secure and properly sealed, and take pride in building products that meet high quality standards. If you have mechanical aptitude, experience in an assembly setting, and enjoy working with your hands in a clean, team-oriented environment-this could be a great fit for you. Key Responsibilities: Perform various assembly tasks such as drilling, riveting, and bonding structural components. Use pneumatic and handheld tools (e.g., riveting guns) to secure composite parts and structural assemblies. Apply sealants, such as epoxy, to joints and seams; ensure proper curing and surface prep. Read and interpret work orders and blueprints to determine assembly steps and correct specifications. Trim, sand, deflash, and fill fiberglass components to meet quality and finish standards. Using calipers, gauges, etc to maintain and ensure accuracy and precision Load and unload molds into ovens, presses, or autoclaves. Prepare and label materials according to production log ticket requirements. Maintain tools, molds, fixtures, and equipment in the Composite Assembly area. Follow company workmanship and quality standards throughout all tasks. Support other assigned duties as directed by management. Comply with all company safety policies and guidelines provided by the Facility Engineer and Safety Director. Requirements: High school diploma or equivalent required. Minimum 2 years of mechanical or structural assembly experience in a manufacturing environment Experience with various rivets, riveting tools, and assembly processes. Skilled in the safe use of hand tools, power tools, and precision measuring instruments (e.g., calipers, gauges, micrometers). Proficient in reading and interpreting blueprints, work instructions, and technical drawings. Physically capable of lifting and pushing up to 25 lbs. Strong attention to detail and commitment to quality standards. Effective communication and teamwork skills in a production environment. Strong written and verbal communication skills in English Preferred: Composite assembly experience Experience working in the aerospace industry Why You'll Love Working Here: We are a multi-generational team with members representing a diversity of cultures, educational backgrounds, experience levels and ideas all 'making it happen' from one location in beautiful, coastal South Florida. We are a long-standing supplier providing cutting edge products in support of long term aerospace programs, while at the same time developing new products to meet the needs of new customers, programs and up and coming markets. Additionally, DG loves its employees! The average employee tenure is around 10 years. Length of service milestones are celebrated company-wide and employees may make selections of anniversary gifts. Benefits Affordable comprehensive insurance coverage (Medical, Dental, Vision). 401(k) match. Paid Time Off (PTO) and paid holidays. Mental health benefits. Complimentary life insurance with the option for supplemental coverage. Paid parental leave Short-term and long-term disability coverage. Excellent work-life balance. Tuition reimbursement. Dynamic and collaborative work environment. On-site gym. Access to advanced technology and resources. Length of service/milestone anniversary gifts. Team-building activities. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This position requires use of or access to information subject to the Export Administration Regulations (“EAR') or the International Traffic in Arms Regulations (“ITAR'). Accordingly, all applicants must be U.S. persons within the meaning of these regulations. Under ITAR, a U.S. person is defined as a U.S. Citizen, U.S. Permanent Resident, or a person who is a protected individual under the Immigration and Naturalization Act (8 U.S.C. 1324b(a)(3)).

Job Description Assembles mechanical units, fabricated parts/components and/or electrical/electronic systems to make subassemblies, assemblies or complete units using hand tools, power tools, jigs, fixtures and miscellaneous equipment. Fits, aligns, calibrates and adjusts parts and mechanisms to meet tolerances and product operating requirements; repairing units or products that have failed to meet requirements. This position requires knowledge that is acquired through experience, specialized education or training. The role has clearly defined procedures and tasks as well as defined guidelines to aid in decision making. Technical knowledge required is limited to the tasks performed in own discipline area and is considered basic. The tasks are generally routine and manual. The job is expected to follow detailed and defined rules / instructions and to make simple judgement in straightforward situations. Typically requires selecting between solutions already established. This job typically requires no experience. Hours:8:00am to 5:00pm Additional Job Details: The worker must be open to work first or second shift (2PM-11PM) Note Shift preference on the top of the resume. Electromechanical background required.

Job Description About the Role: The Assembly Technician plays a critical role in the manufacturing process by accurately assembling components and products according to detailed specifications and quality standards. This position ensures that all assembled products meet safety and performance requirements before moving to the next stage of production or shipment. The technician will work closely with engineering and quality assurance teams to identify and resolve assembly issues, contributing to continuous improvement initiatives. Attention to detail and adherence to safety protocols are paramount to maintain a safe and efficient work environment. Ultimately, the Assembly Technician helps deliver high-quality products that meet customer expectations and support the company's reputation for excellence. Minimum Qualifications: High school diploma or equivalent. Basic understanding of mechanical and electronic assembly processes. Ability to read and interpret technical drawings and assembly instructions. Proficiency in using hand and power tools safely and effectively. Strong attention to detail and manual dexterity. Preferred Qualifications: Previous experience in an assembly or manufacturing environment. Familiarity with quality control standards such as ISO or Six Sigma. Ability to use measurement tools such as calipers and micrometers. Responsibilities: Assemble mechanical and electronic components using hand tools, power tools, and assembly fixtures according to work instructions and blueprints. Inspect parts and assemblies for defects or deviations from specifications and report any quality issues to supervisors. Maintain a clean and organized work area to ensure safety and efficiency. Collaborate with team members and supervisors to troubleshoot assembly problems and implement corrective actions. Document assembly processes and complete production reports accurately and timely. Skills: The required skills enable the Assembly Technician to accurately interpret technical documents and perform precise assembly tasks, ensuring product quality and consistency. Manual dexterity and tool proficiency are essential for efficient and safe handling of components and equipment. Attention to detail helps in identifying defects early and maintaining high standards throughout the assembly process. Preferred skills such as knowledge of quality control and measurement tools enhance the technician's ability to contribute to process improvements and maintain compliance with industry standards. Effective communication and teamwork skills support collaboration with colleagues and supervisors to resolve issues and optimize production workflows.

The Assembly Technician is responsible for the assembly of valves. The Technician must be able to read and understand Engineering blueprints, follow work instructions precisely, and utilize any other approved and relevant documents for assembling valves. Exact demands will vary depending on the assigned job and station. The Technician may be required to be knowledgeable and competent in multiple stations within the Assembly department. The Technician exercises care and due diligence ensuring work instructions and procedures are followed and quality requirements are upheld (proper handling, visual appearance, and any other assembly specific quality elements). Responsibilities Be able to work well under pressure and in a high-volume manufacturing environment. Exercise required care when assembling and handling parts. Able to use and learn/interpret various gauges, meters, and other instrumentation. Attentive to their work and workspace to see, notify, and/or prevent UVC. Requirements Have a basic level of computer literacy. Is manually dexterous and works well with small hand-held parts. Be able to view parts through a microscope Be detail-oriented Able to work individually and in team settings as required. Can read Engineering blueprints, work instructions, and other relevant documents that are written in English. A background check and drug screen are contingent upon hiring The responsibilities and requirements listed above are representative of the knowledge, skill, and/or ability required. Business Overview: Valve Research & Manufacturing Co. is an industry leader in high-precision valve manufacturing for military and commercial aerospace and oceanographic applications. EEO Statement: Valve Research & Manufacturing Company believes that all persons are entitled to equal employment opportunities and does not discriminate against its employees or applicants because of such individua's race, color, religion, sex (including gender), sexual orientation, national origin, ancestry, age, martial status, disability, veteran status, genetic information, or any other basis prohibited by federal, state, or local law. Equal employment opportunity will be extended to all persons in all aspects of Valve Research & Manufacturing company-employee relationship, including recruitment, employment, training, promotion, transfer, corrective action, working condition, compensation, employee benefits, layoff, and termination. You should be proficient in: GD&T Electrical Schematics Soldering Mechanical Assembly Skills Engineering Degree High School / GED Experience in a Manufacturing Environment Blueprint Reading Basic Computer Skills Machines & technologies you'll use: Industrial/Parts Washing Systems Heat Gun 2D Drawings Multimeter (Fluke, Klein Tools) Power Tools (Makita, Black+Decker) Measurement Gauges Industrial Robot

Job DescriptionDescription: We are seeking a hands-on and detail-oriented Production Technician to join our team. This role is responsible for assembling, testing, and troubleshooting Watermaker systems and components in a production environment. The ideal candidate has mechanical aptitude, follows precise instructions, and thrives in a fast-paced, quality-driven setting. You will collaborate with internal teams to ensure timely and accurate builds that meet our company's high standards. Production Responsibilities: Assemble complete Watermaker systems and sub-assemblies in accordance with engineering drawings, wiring diagrams, and schematics. Conduct in-process and final quality control inspections, including full system testing prior to shipment. Ensure the production area remains clean, organized, and compliant with safety protocols Accurately package and label systems for domestic and international shipment. Support inventory control by tracking components, reporting shortages, and assisting with material handling. Collaborate with the engineering and service teams to identify and resolve assembly issues Requirements: Qualifications: Technical degree or vocational training preferred; High school diploma or equivalent 1-3 years' experience in mechanical, electrical, or marine systems. Strong mechanical aptitude with basic plumbing and electrical knowledge. Ability to read technical diagrams, schematics, and wiring diagrams. Comfortable using hand tools, power tools, and testing instruments. Valid driver's license and ability to travel locally or occasionally overnight Excellent communication and problem-solving skills. Able to lift up to 50 lbs. and work in tight or elevated spaces.

Full-time Description We are seeking a hands-on and detail-oriented Production Technician to join our team. This role is responsible for assembling, testing, and troubleshooting Watermaker systems and components in a production environment. The ideal candidate has mechanical aptitude, follows precise instructions, and thrives in a fast-paced, quality-driven setting. You will collaborate with internal teams to ensure timely and accurate builds that meet our company's high standards. Production Responsibilities: Assemble complete Watermaker systems and sub-assemblies in accordance with engineering drawings, wiring diagrams, and schematics. Conduct in-process and final quality control inspections, including full system testing prior to shipment. Ensure the production area remains clean, organized, and compliant with safety protocols Accurately package and label systems for domestic and international shipment. Support inventory control by tracking components, reporting shortages, and assisting with material handling. Collaborate with the engineering and service teams to identify and resolve assembly issues Requirements Qualifications: Technical degree or vocational training preferred; High school diploma or equivalent 1-3 years' experience in mechanical, electrical, or marine systems. Strong mechanical aptitude with basic plumbing and electrical knowledge. Ability to read technical diagrams, schematics, and wiring diagrams. Comfortable using hand tools, power tools, and testing instruments. Valid driver's license and ability to travel locally or occasionally overnight Excellent communication and problem-solving skills. Able to lift up to 50 lbs. and work in tight or elevated spaces.

Job description We are a gaming company that operates through out the Miami/ FLL area in various locations (gas stations and convenience stores). We are looking for a technician who will be responsible for the repair and maintenance of our games. Technician duties are, installing, servicing and repairing game machines. Some electric knowledge is required to test, repair and maintain the game machines and related gaming equipment. We are willing to train the right candidate. Duties: Builds, rebuilds, converts, adjusts, calibrates, and modifies any game machine and related gaming equipment. Diagnose causes of malfunctions and failures and take immediate appropriate action. Maintains a clean, safe, hazard-free work environment within area of responsibility. Performs all service requirements for gaming machines included in the installation and relocation. Checks for restocking of necessary supplies. Brings all areas up to standard. Discusses problem areas with Manager. Technical and/or electrical skills preferred Must Speak Both English/Spanish

Job Description Engine & Accessory, Inc., a leading manufacturer in the automotive industry, is currently seeking skilled mechanical assemblers to join our dynamic team in the tank and dump truck division. As a mechanical assembler, you will play a pivotal role in the assembly and production of our diverse product line. From vacuum and refined fuel trucks to waste oil collection, water spray vehicles, and our newest addition-dump trucks-your expertise will contribute to delivering high-quality, reliable vehicles to our customers. Essential Job Duties and Responsibilities: Utilize hand and pneumatic tools proficiently to assemble, wire, and install components in accordance with assembly books and engineered drawings. Install a variety of components, including PTO's, pumps, hydraulics, valves, toolboxes, wire harnesses, fuses, and switches, ensuring precision and adherence to specifications. Follow written directions, schematics, and verbal instructions meticulously to execute assembly tasks accurately. Gather and position materials and parts according to assembly documentation, maintaining an organized and efficient work environment. Safely operate a range of equipment, including hand and pneumatic tools, material handling equipment, and overhead cranes. Conduct thorough inspections of completed work to identify and rectify any defects, ensuring that all equipment meets stringent quality standards. Adhere to safety regulations at all times, including the proper use of protective gear such as gloves, eyewear, and safety shoes. Perform any additional duties assigned by supervisors to support team objectives and meet production goals. Position Requirements: Strong mechanical aptitude and proficiency in 12V electrical systems. Ownership of a basic set of hand tools for use in assembly tasks. Previous experience in manufacturing environments is advantageous. Exceptional attention to detail and commitment to producing high-quality work. Effective verbal and written communication skills, with the ability to convey information clearly and accurately. Company DescriptionFor over 75 years, Engine & Accessory, Inc. has produced innovative products and solutions to meet the demands of our customers and their industries. From off-highway to over-the-road, our comprehensive line of equipment provides unsurpassed performance and dependability, offering solutions for a wide range of liquid transport and delivery needs. Through an extensive distribution network, our products are shipped throughout North America and around the world. Focused on the power to achieve exceptional results through exceptional equipment, our proven performance carries on to superior service and support for our customers. Today, Engine & Accessory manufactures a wide variety of off-highway, custom-built specialty chassis for aviation refueling and ground support equipment as well as other vocational markets. We also manufacture a full line of tank truck applications that include fuel delivery, vacuum, waste oil, water, fire, and just about any liquid transport or delivery need. Moving forward on the leading edge of technology and experience, Engine & Accessory will continue to enhance our product lines and design new equipment to meet our customers' demands in an ever-changing market worldwide.Company DescriptionFor over 75 years, Engine & Accessory, Inc. has produced innovative products and solutions to meet the demands of our customers and their industries. From off-highway to over-the-road, our comprehensive line of equipment provides unsurpassed performance and dependability, offering solutions for a wide range of liquid transport and delivery needs. Through an extensive distribution network, our products are shipped throughout North America and around the world. Focused on the power to achieve exceptional results through exceptional equipment, our proven performance carries on to superior service and support for our customers.\r Today, Engine & Accessory manufactures a wide variety of off-highway, custom-built specialty chassis for aviation refueling and ground support equipment as well as other vocational markets.\r We also manufacture a full line of tank truck applications that include fuel delivery, vacuum, waste oil, water, fire, and just about any liquid transport or delivery need.\r Moving forward on the leading edge of technology and experience, Engine & Accessory will continue to enhance our product lines and design new equipment to meet our customers' demands in an ever-changing market worldwide.

Job DescriptionBenefits: Employee discounts Free food & snacks Opportunity for advancement Eat Clean delivers healthy and delicious food to clients nationally. We are a rapidly growing, privately held company focused on delicious food, healthy living and longevity. We are a growing healthy meal prep company dedicated to providing fresh, nutritious meals to our customers. We focus on quality ingredients, food safety, and efficient delivery to help people eat well with ease. Responsibilities Plate and assemble meals according to recipes and portion guidelines Ensure meals are visually appealing and consistent Follow food safety and sanitation standards Label, package, and prepare meals for delivery or pickup Maintain a clean and organized workspace Work efficiently in a fast-paced kitchen environment Qualifications Strong attention to detail and presentation Ability to follow instructions and portion standards Comfortable standing for extended periods Reliable, punctual, and team-oriented Food handling or kitchen experience is a plus (but not required) Passion for healthy food is a bonus Physical Demands and Other Requirements: Regularly required to work more than 8 hour at times Regularly required to use hands Regularly required to bend down to floor level or reach above eye level Must have reliable transportation Must have reliable means of communication Must wear slip-resistant, oil-resistant shoes while working at all time (provided by employee)

GotWorX, Inc. Is currently seeking a Assembly Associate for our client based in the Fort Lauderdale area. Temp-Hire job opportunity for the right candidate. Client is currently offering a salary of $13.50, plus a benefits package one perm employee! Responsibilities: Prepares work to be accomplished by studying assembly instructions, blueprint specifications, and parts lists; gathering parts, subassemblies, tools, and materials. Positions parts and subassemblies by using templates or reading measurements. Assembles components by examining connections for correct fit; fastening parts and subassemblies. Verifies specifications by measuring completed component.

Pay Range: $15-17 Assemble manufactured materials and components. Ensure quality in assembled products including accuracy of BOM for assembly and that the assembly itself meets all design specifications. * Looking for entry level someone who can read and understand English. Basic computer skills Performs a variety of duties necessary to construct electrical and/or mechanical assemblies, modules, and circuit boards within a team environment. Persons in this position promote a climate of cooperation; leading by example; mentoring others in quality, safety, environmental, Lean and HPWS philosophies. Demonstrate flexibility to perform other duties as requested. Duties are performed under limited supervision. Various computer/SAP skills necessary. Required to use hand tools and operate machinery to install a variety of parts/assemblies on electrical equipment and perform required assembly/rework operations to meet quality standards. Works from computer generated pictures, wiring diagrams, simple drawings or sketches, engineering drawings, specifications and other written or verbal instructions to perform job functions. May be required to perform administrative, maintenance, stock duties and routing. May be required to perform additional duties/responsibilities. High school graduate or equivalent. Must successfully pass assembly training school. May be required to lift/move heavy parts and/or equipment weighing up to 55 pounds. Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices. Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at accommodations@butler.com.

Job Description Essential Duties and Accountabilities Ensures all components are correct in size, color and order. Enters data into the computer system. Scans ballistic panel barcode and plate. Verifies accuracy of ballistic and information. Assembles the ballistic following the process steps according to work order specifications. Prints packaging slips. Inserts carrier assembly into the plastic bag, paste label and puts carrier in box. Closes the box with tape and inserts the packaging list into the envelope. Performs a visual inspection for accuracy. Weighs the box and enter the information into the system. Prints the shipping label and tracking and pastes onto box. Confirms label matches the information in the system. Places the completed box on pallet. Diligently attends to details and pursues quality in accomplishing tasks. Responsible for working according to the company's safety and quality standards. Maintains a safe and clean work area. Performs other related duties as required and or as assigned.

Job Description Job Purpose: Assembly of parts using components · Prepares work to be accomplished by reading assembly instructions, gathering component parts, tools, and materials · Assembles parts by using templates and/or fixtures · Verifies specifications by measuring completed component · Keeps equipment operational by completing preventive maintenance requirements · Maintains a safe and clean working environment by complying with procedures, rules, and regulations. · Conserves resources by using equipment and supplies as needed to accomplish job results · Documents actions by completing a written instruction checklist Skills / Qualifications: · Must be able to stand up 90% of the time · Must be able to show good craftsmanship and attention to detail · Prior manufacturing experience is a plus · Must be able to lift up to 40 lbs This position is full-time, from 6:00 a.m. to 2:30 p.m., Monday through Thursday, and Friday 6:00 a.m. to 11:45 a.m. Immediate start. The employer is an EEOE and provides a DFW. Company DescriptionWe are a manufacturer of acrylic and polycarbonate windows, windshields, canopies, and lenses for the Department of Defense and rotary craft manufacturers such as Boeing and Bell Helicopter.Company DescriptionWe are a manufacturer of acrylic and polycarbonate windows, windshields, canopies, and lenses for the Department of Defense and rotary craft manufacturers such as Boeing and Bell Helicopter.

Job Description We are seeking a Light Assembly Worker to become an integral part of our team! You will perform assembly line tasks as well as identify areas of improvement to increase efficiency. Responsibilities: Work with a team to assemble entire products or components Rotate through tasks for specific production processes Conduct quality inspections on products and parts Prepare finished products for shipment Maintain a clean and orderly work area Familiarity with assembly tools and equipment Ability to handle physical workload Ability to work well in teams Ability to thrive in a fast-paced environment