Assembly technician jobs in Greece, NY - 122 jobs

Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are currently seeking an individual to collaborate with us as an Assembler. The Assembler is responsible for the assembly of product according to the project specifications, assisting with the final product preparation for delivery while visually inspecting parts and assembled pieces for defects. Successful candidates will possess: A HS Diploma or GED; 1-2 years of previous manufacturing experience; Ability to use an air gun, air drivers, other hand and power tools and a pallet truck; Alignment with the requirements and principles of the Advantech Quality Management System and ISO 9001:2015; Skills to operate assigned equipment safely and efficiently; Capacity to handle changes in business operations and adjust to new situations; Preparedness to sit for extended periods and manipulate items with dexterity; Ability to work with limited supervision. What we offer: Monday through Friday 7:30 am to 4:00 pm; Full time employment (39.75 hours per week); Medical (3 HDHP offered), Dental and Vision Plans Vacation, Paid Sick Leave and Company Paid Holidays Company Paid Life Insurance Optional Short-Term and Long-Term Disability Available 401k with Company Match According to the New York Pay Transparency law, pay range for this job is $18.00 - $27.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources. Monday through Friday 7:30 am to 4:00 pm Full time employment (39.75 hours per week)

Responsible for assembly of small or medium sized parts. Fitting and/or adjustment of interrelated parts and/or assembly. Adjustment and repair of subassemblies and major assemblies May involve mechanical, optical, and electrical/electronic operations. Responsible for inspection of own work and work of others. Utilize process detail, prints, bills of material, and cut lists to produce quality product. Maintain a safe and clean work environment. Requirements HS Diploma Requires use of wide range of hand and power tools, electrical or mechanical fixtures, standard measuring devices such as rulers and tape measures, drills, jigs, fixtures, and light materials. Ability to correct documentation when needed. Coordinate with engineering and purchasing when necessary. Incoming and Outgoing Inspections Salary Description $18.50 - $20 / hr

Responsible for assembly of small or medium sized parts. Fitting and/or adjustment of interrelated parts and/or assembly. Adjustment and repair of subassemblies and major assemblies. May involve mechanical, optical, and electrical/electronic operatio Assembler, Mechanical, Manufacturing

Adecco is currently seeking Mechanical Assemblers to support a leading manufacturer of monitoring and protection devices for high-value electrical assets. This position is located in Fairport, NY. Candidates should have prior experience in a manufacturing or mechanical assembly environment and be comfortable working in a quality-driven, detail-oriented setting. The Mechanical Assembler will be responsible for assembling, inspecting, and testing mechanical components and subassemblies used in monitoring and protection equipment. This role requires strong attention to detail, the ability to follow technical documentation, and a commitment to quality and safety standards. Responsibilities of the Mechanical Assembler: Assemble mechanical components and subassemblies using hand and power tools. Follow detailed work instructions, blueprints, schematics, and assembly drawings. Perform fastening, fitting, alignment, and adjustment of mechanical parts. Inspect finished assemblies to ensure conformance to quality and performance standards. Identify, troubleshoot, and correct minor mechanical assembly issues. Maintain a clean, organized, and safe work environment. Accurately record production and quality data. Adhere to all safety, quality, and manufacturing procedures. Requirements for the Mechanical Assembler: High school diploma or equivalent; technical or mechanical training preferred. Prior experience in mechanical assembly or manufacturing preferred. Ability to read and interpret blueprints, schematics, and technical documents. Proficiency with hand tools, power tools, and basic measuring instruments. Strong attention to detail and quality focus. Good manual dexterity and hand-eye coordination. Ability to work independently and collaboratively in a team environment. Strong communication and problem-solving skills. Click apply to be considered for this Mechanical Assembler opportunity in Fairport, NY! Pay Details: $18.50 to $21.50 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Technical Assembler II Primary Function: The Technical Assembler II performs a variety of complex builds for our diverse customer base. Tasks may consist of working from production blueprints, digital work instructions, parts lists, and verbal instructions to perform various mechanical assembly functions as needed, based on customer requirements. Reports To: Production Supervisor Essential Functions: Assembles component parts by following work instructions Reads and understands basic blueprints. Knowledge of 5S principles Uses precision measuring tools, such as calipers, thread gauge, and feeler gauge Reviews completed items to quality specifications Basic Qualifications: Willing to perform repetitive tasks while sitting or standing for extended periods of time High school / equivalent, or a 2 year technical education Prior knowledge of hand or power tools Preferred Qualifications: Experience with wire boards, schematics, production blueprints are a plus Clean room experience a plus Work Authorization: US Persons PEKO Perks: Competitive Compensation Tuition Reimbursement (IRS Allowable pre-tax Max) 401K, Medical, Dental, Vision Flexible Spending & Health Savings Accounts Life, Short and Long-Term Disability Recognition Awards & Discretionary Benefits Our Core Values: Compassion: We care about our talented and loyal PEKO family. Safety: We are committed to providing a safe, clean, and positive workplace. Integrity: We believe in transparency, honesty, and respect for all stakeholders. Agility: We are dedicated to maintaining an agile and financially prudent organization. Endurance: We foster the belief that PEKO people are resilient problem-solvers impacting the future. Get a glimpse of why we are #PEKOProud: #PEKOProud - YouTube Other: This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice. For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products A reasonable estimate of the compensation range for this position is $17.00- $22.00 per hour. The wage range for this role considers a wide range of factors when making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training.

It's fun to work in a company where people truly BELIEVE in what they're doing! We're committed to bringing passion and customer focus to the business. The Cable Assembly Precision Soldering Associate is responsible for performing precision hand soldering and cable assembly by hand for complex cable and harness solutions. This position ensures all work meets the requirements of IPC-A-610, IPC-A-620, J-STD-001, and customer-specific quality standards. This position supports both prototype and production builds, contributing to the success of high-mix, low-volume wire and cable assembly organization in a highly-regulated aerospace, defense, and medical environment.Key Responsibilities Perform precision hand soldering using various types of techniques such as solder cups, J-hooks and through-hole in order to assemble and build highly complex cables and wire harnesses. Must be able to solder without burning through the insulation or connectors. Requires a high level of accuracy to support manual assembly and production of our cable & wire harness products. This role is required to follow IPC and engineering standards. Inspect solder joints and assemblies for quality compliance per IPC-A-610 Class II and III criteria, IPC-A-620, and J-STD-001. Use soldering irons, mag-lights, and ESD-safe tools safely and effectively. Interpret engineering drawings, work instructions, and assembly documentation to ensure accuracy and following detailed instructions. Identify and report nonconformances, process deviations, or quality issues promptly. Maintain ESD compliance and ensure safe handling of sensitive electronic components where required. Support process engineers and production leads in troubleshooting assembly and solder-related defects and continuous improvement activities. Participate in 5S and Lean manufacturing initiatives to maintain an organized and efficient workspace. Accurately complete production records, inspection logs, and traceability documentation in compliance with AS9100 and ITAR regulations. Perform other duties as required to support a wide variety of cable and wire harness production assembly. Qualifications Education / Experience: High school diploma or GED required; technical training or IPC certification preferred. Minimum 1 year of precision soldering experience. Wire, cable or harness assembly soldering in an ISO- or AS9100-certified environment preferred. Experience in aerospace, defense, or medical device manufacturing strongly preferred. Skills / Competencies: Proficiency in IPC-A-610, IPC-A-620, and J-STD-001 soldering standards (certification preferred) in wire harness and cable assembly. Strong manual skills (dexterity, detail-oriented), technical understanding (reading diagrams, basic math), and attention to quality standards, focusing on precise crimping, soldering, documentation, and testing. Excellent hand-eye coordination, color vision (for wire color coding), and ability to use small hand tools. Ability to view color coded components as they feed into a single assembly. Ability to hear part assembly clicking into place to ensure quality connections. Ability to read and interpret assembly drawings, schematics, and work instructions. Team-oriented, reliable, and quality-focused. Must be a U.S. Person per ITAR regulations (citizen or lawful permanent resident). Physical and Work Environment Requirements Work involves manual assembly to precision level of detail with your hands for 8-hour shifts per week. Must be able to sit, stand, bend and work with hands for long periods. Manual dexterity and fine motor skills required for detailed soldering work. Capable of lifting of up to 25 pounds or heavier weight on a less frequent basis throughout the day. Benefits Competitive hourly pay Quarterly Manufacturing Bonuses Medical, dental, and vision insurance Paid time off and holidays 401(k) retirement plan with a company matching Training and advancement opportunities within wire harness and cable manufacturing In compliance with pay transparency requirements, the anticipated starting pay for new hires for this position is between $18-$25 per hour. Full-time employees are also eligible for performance based bonuses and benefits. This is not a guarantee of compensation or salary, as a final offer amount may vary based on factors including but not limited to experience, education, location, and shift. The specific programs and options available to an employee may vary depending on the date of hire, schedule type, and hours worked. r If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us! Creation Technologies is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you require any accommodations to complete the application process or need the job posting in an alternative format, please email Accessibility@creationtech.com. You will be connected with our Talent Acquisition team. If you are contacted regarding the position, please inform our Talent Acquisition team of any accommodations you may need during the recruiting process. All information related to accommodation requests will be handled confidentially. Canada: Title for the position will be in accordance with applicable national and local laws.

Full-time Description Job Title: Electromechanical Assembly Technician Company: XLI Manufacturing, LLC Department: Assembly Reports To: Assembly Manager Job Type: Full-time We are seeking a skilled and detail-oriented Electromechanical Assembly Technician to join our manufacturing team. In this role, you will be responsible for assembling, testing, and troubleshooting mechanical and electrical components and systems according to engineering drawings, specifications, and work instructions. The ideal candidate has strong hands-on experience and a solid understanding of both mechanical systems and electrical wiring. Key Responsibilities: Assemble electromechanical products using hand tools, power tools, and specialized equipment. Read and interpret schematics, blueprints, wiring diagrams, and assembly instructions. Install and route wiring, cables, and harnesses; solder and connect electrical components as required. Conduct functional testing and troubleshooting of assemblies to ensure proper operation. Identify and resolve mechanical or electrical issues during the build process. Inspect finished assemblies for quality, accuracy, and compliance with standards. Maintain a clean and organized work area in compliance with safety standards. Collaborate with engineering and quality teams to provide feedback on design improvements. Document work performed, materials used, and issues encountered. Participate in continuous improvement and lean manufacturing initiatives. Qualifications: High school diploma or equivalent required; technical certificate or associate degree in electronics, mechanics, or a related field preferred. 2+ years of experience in electromechanical assembly or a similar manufacturing role. Proficient in reading and interpreting technical drawings and schematics. Skilled in using a variety of hand and power tools. Basic knowledge of electrical wiring, soldering, and troubleshooting techniques. Familiarity with IPC standards is a plus. Ability to work independently and as part of a team. Strong attention to detail and commitment to quality. Ability to lift up to 50 lbs and stand for extended periods. Work Environment: Manufacturing floor environment with exposure to mechanical and electrical equipment. May require the use of PPE (personal protective equipment). Regular use of tools and equipment requiring dexterity and precision. Benefits: Competitive pay based on experience Health, dental, and vision insurance 401(k) with company match Paid time off and holidays Opportunities for training and career advancement

Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are currently seeking an individual to collaborate with us as an Assembler. The Assembler is responsible for the assembly of product according to the project specifications, assisting with the final product preparation for delivery while visually inspecting parts and assembled pieces for defects. Successful candidates will possess: A HS Diploma or GED; 1-2 years of previous manufacturing experience; Ability to use an air gun, air drivers, other hand and power tools and a pallet truck; Alignment with the requirements and principles of the Advantech Quality Management System and ISO 9001:2015; Skills to operate assigned equipment safely and efficiently; Capacity to handle changes in business operations and adjust to new situations; Preparedness to sit for extended periods and manipulate items with dexterity; Ability to work with limited supervision. What we offer: Monday through Friday 7:30 am to 4:00 pm; Full time employment (39.75 hours per week); Medical (3 HDHP offered), Dental and Vision Plans Vacation, Paid Sick Leave and Company Paid Holidays Company Paid Life Insurance Optional Short-Term and Long-Term Disability Available 401k with Company Match According to the New York Pay Transparency law, pay range for this job is $18.00 - $27.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources.

Gorbel's mission is simple: We improve people's lives. That mission guides everything we do, from the products and service we provide to our outside customers to the work environment we foster for our employees. We are a manufacturer of material handling and fall protection products for the production and warehouse/distribution sectors. We're on the cutting edge of manufacturing and distribution; a thriving, growing company that is constantly seeking out new ways to innovate and elevate our products and our processes - and we're looking for people like you to join us in that mission. We're currently hiring for open positions in the US and Canada. We operate in Canada as Engineered Lifting Systems and Equipment (ELS)/DBA Gorbel Canada, and subsequent communication related to Canadian positions may show the ELS name. You may be contacted by phone by recruitment personnel based in either Canada or New York. Work Shift: First Shift (United States of America) Job Description: The Electrical Mechanical Assembler is responsible for the assembly of control panels. Assembler utilizes stock electrical and mechanical components to build custom panels per job instructions. Works with little or no supervision. Interaction with Technicians or Engineering Department may be required depending on complexity of the design. Responsibilities Build or assemble non-electrified and electrified components by following the specified directions from the job paperwork Required to test and initial electrified components for function Submit requests for replacement tooling or supplies Debug and trouble shoot electrical problems Complete inventory cycle counts as needed Ensure all documents are filled out completely All other duties as assigned by management Qualifications: High school diploma or equivalent required Must be able to pass truck and crane certification with training upon hire Computer knowledge of Microsoft Windows, Word, Excel, and other computer programs Ability to read tape measure Ability to read a blue print Ability to use hand tools requiring dexterity Must be able to communicate effectively with factory supervision Work Environment:ADA Physical/Mental/Workplace Requirements Able to lift and/or move up to 50 pounds. Able to stand (75%); walk (20%); stoop, kneel or crouch (5%), as required. Able to climb portable ladders Able to wear safety glasses and foot protection throughout shift. Able to wear hearing protectors (ear plugs) throughout the shift while working in an environment with moderate noise levels. Gorbel is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, disability or handicap, gender, marital status, veteran status, sexual orientation, genetic information, arrest record, or any other characteristic protected by applicable federal, state or local laws. Gorbel is also committed to providing reasonable accommodations to qualified individuals so that an individual can perform their job-related duties. If you are interested in applying for an employment opportunity and require special assistance or an accommodation to apply due to a disability, please contact us at ************. The wage range for this role takes into account the wide range of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational needs. At Gorbel, it is not typical for an individual to be hired at or near the top of the range for their role, and compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current range is: Electrical/Mechanical Assembler I: Min $17.59 - Max $26.39 Electrical/Mechanical Assembler II: Min $19.74 - Max $29.62 Electrical/Mechanical Assembler III: Min $21.42- Max $32.14 #ZR

It's fun to work in a company where people truly BELIEVE in what they're doing! We're committed to bringing passion and customer focus to the business. The Cable Assembly Precision Soldering Associate is responsible for performing precision hand soldering and cable assembly by hand for complex cable and harness solutions. This position ensures all work meets the requirements of IPC-A-610, IPC-A-620, J-STD-001, and customer-specific quality standards. This position supports both prototype and production builds, contributing to the success of high-mix, low-volume wire and cable assembly organization in a highly-regulated aerospace, defense, and medical environment.Key Responsibilities Perform precision hand soldering using various types of techniques such as solder cups, J-hooks and through-hole in order to assemble and build highly complex cables and wire harnesses. Must be able to solder without burning through the insulation or connectors. Requires a high level of accuracy to support manual assembly and production of our cable & wire harness products. This role is required to follow IPC and engineering standards. Inspect solder joints and assemblies for quality compliance per IPC-A-610 Class II and III criteria, IPC-A-620, and J-STD-001. Use soldering irons, mag-lights, and ESD-safe tools safely and effectively. Interpret engineering drawings, work instructions, and assembly documentation to ensure accuracy and following detailed instructions. Identify and report nonconformances, process deviations, or quality issues promptly. Maintain ESD compliance and ensure safe handling of sensitive electronic components where required. Support process engineers and production leads in troubleshooting assembly and solder-related defects and continuous improvement activities. Participate in 5S and Lean manufacturing initiatives to maintain an organized and efficient workspace. Accurately complete production records, inspection logs, and traceability documentation in compliance with AS9100 and ITAR regulations. Perform other duties as required to support a wide variety of cable and wire harness production assembly. Qualifications Education / Experience: High school diploma or GED required; technical training or IPC certification preferred. Minimum 1 year of precision soldering experience. Wire, cable or harness assembly soldering in an ISO- or AS9100-certified environment preferred. Experience in aerospace, defense, or medical device manufacturing strongly preferred. Skills / Competencies: Proficiency in IPC-A-610, IPC-A-620, and J-STD-001 soldering standards (certification preferred) in wire harness and cable assembly. Strong manual skills (dexterity, detail-oriented), technical understanding (reading diagrams, basic math), and attention to quality standards, focusing on precise crimping, soldering, documentation, and testing. Excellent hand-eye coordination, color vision (for wire color coding), and ability to use small hand tools. Ability to view color coded components as they feed into a single assembly. Ability to hear part assembly clicking into place to ensure quality connections. Ability to read and interpret assembly drawings, schematics, and work instructions. Team-oriented, reliable, and quality-focused. Must be a U.S. Person per ITAR regulations (citizen or lawful permanent resident). Physical and Work Environment Requirements Work involves manual assembly to precision level of detail with your hands for 8-hour shifts per week. Must be able to sit, stand, bend and work with hands for long periods. Manual dexterity and fine motor skills required for detailed soldering work. Capable of lifting of up to 25 pounds or heavier weight on a less frequent basis throughout the day. Benefits Competitive hourly pay Quarterly Manufacturing Bonuses Medical, dental, and vision insurance Paid time off and holidays 401(k) retirement plan with a company matching Training and advancement opportunities within wire harness and cable manufacturing In compliance with pay transparency requirements, the anticipated starting pay for new hires for this position is between $18-$25 per hour. Full-time employees are also eligible for performance based bonuses and benefits. This is not a guarantee of compensation or salary, as a final offer amount may vary based on factors including but not limited to experience, education, location, and shift. The specific programs and options available to an employee may vary depending on the date of hire, schedule type, and hours worked. r If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us! Creation Technologies is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you require any accommodations to complete the application process or need the job posting in an alternative format, please email Accessibility@creationtech.com. You will be connected with our Talent Acquisition team. If you are contacted regarding the position, please inform our Talent Acquisition team of any accommodations you may need during the recruiting process. All information related to accommodation requests will be handled confidentially. Canada: Title for the position will be in accordance with applicable national and local laws.

Job Description Job purpose Responsible for assembly and/or scanning of small or medium sized parts, fitting and/or adjustment of interrelated parts and/or assembly, adjustment and/or repair of sub-assemblies and major assemblies per process sheets. Could also be responsible for teardown, cleaning and reassemble of refurbs. Duties and responsibilities Maintains proper quality and quantities of manufactured materials. Operate small equipment such as presses, magnetizing/demagnetizing equipment, scanners. Perform SPC on all related jobs as required. Operate degreasing systems as required. Able to set-up equipment where applicable. Able to calibrate and zero equipment. Perform preventative maintenance. Use general measuring instruments, such as indicator, calipers, and height gages. Rotate from one job to another if needed. Maintain accurate documentation. Follows all established company policies Follows all established safety procedures and precautions. Including filing incident/accident reports. Notifies Supervisor of all unsafe/hazardous conditions or defective equipment. Other duties as assigned Qualifications High School Diploma/GED Be able to follow written and oral instructions. Previous employed in a production environment helpful. Able to communicate. Math aptitude. Mechanical capabilities helpful. Working conditions May be exposed to industrial oils, toner, coolants, solvents, lubricants, adhesive and other chemicals. NOTE: All safety precautions will be used. Plant wide climate control and air conditioning Could work in areas with excessive noise. NOTE: Ear protection available. Certain jobs extremely dirty. NOTE: Smocks or work outfits provided. Physical requirements Could require intermittent and long periods of sitting and/or standing. Required to do repetitive work. Periodic lifting of materials not to exceed 50 pounds. Hours: A Shift: Mon-Thurs: 5:30am-3:00pm Fri: 5:30am-9:30am #ROC Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran A Shift: Mon-Thurs: 5:30am-3:00pm Fri: 5:30am-9:30am

Level 1 - RC 15 - Includes White Film Evaporators (WFE), Chronical Dryer Blenders (CDD) and all lower levels. Level 2 - RC 14 - All A-Level Vessel Assemblies, Clamp Top Heads and Drive Assembly, Movac Equipment. Level 3 - RC 12-13 - B-level Vessel Assembly. Level 4 - RC 10 -11 - Small Parts Assembly, Valves, Bearings, Seals, All Internal Hydro's of Vessels, Jacket's Top Heads and Columns, Paint Applicator and Protective Coatings. Level 5 - RC 9 -10 - All requirements identified below under RC9 Shipper Assembler. Combo of Assembler A, 050 (12 & 14); Drive Parts Assembler, 141 (10); & Shipper/ Assembler, 140 (9) NOTE: Level 1 became RC15 on 1/1/2019. Assembles mechanical/electrical or fabricated parts to produce subassemblies or completed production units. Disassembles, cleans and repairs parts or subassemblies returned from customers. Must have full working knowledge and ability to operate overhead cranes, including special operating procedures for installing glass to glass. Know proper sequence and procedures with the use of liquid nitrogen and the assembly and disassembly of single and/or dual flight Cry-O-Lock hubs. Have the ability to plan and implement different scaffolding platforms for the process of installing dual flight hubs. May fabricate, modify or improvise parts. May machine nozzles, grind, lap, or polish glass on assembly units. Inspects and tests subassemblies or completed production units prior to shipment. Use various hand and machine tools. Must have full working knowledge of SOPs and demonstrate this knowledge to customer inspectors in a professional and organized manner. Must be able to qualify for a tow motor license and operate a forklift within the business unit. May be required to trace parts on the CRT and at times, dispatch parts to keep the jobs moving. Must understand added requirements in paint preparation on vessels and parts. All levels of this classification are expected to train other employees in assembly techniques at their level of accomplished skill and must be able to consistently maintain housekeeping, safety and quality standards and follow standard operating procedures. May be used as a backup serviceman. Reads blueprints and follows verbal instructions. Plans proper sequence of operations and does layout work; may have a helper to whom he assigns work. Works with very little supervision. Train other employees on all aspects of this position as required. RC9 Shipper Assembler: Plans and lays out skids, supports and packing devices. Cuts and assembles skids, crates, boxes and supports. Performs all related tasks required for safe transport or storage of products. May perform various cutting and assembling operations using power and hand tools. Operates departmental lift truck. Provides proper placement of products in skids or crates and on cars and trucks. Checks Bill of Material to ascertain that the correct parts and quantities have been provided. Stencils or labels items and records weights. Writes memo shipping lists or provides other necessary information for typing shipping lists. Locates, gathers, prepares and packs various parts and products for shipping and storage. Weighs package or packages, and based on destination and method shipment, determines proper postage. May use postage machine to affix proper stamps. Drives truck transporting loads from and to factory. Delivers and picks up items from various points within the city as required. Transports L.C.L. shipments to and from freight terminals. Occasionally goes to out-of-town destinations. Loads and unloads truck with or without help using departmental fork lift and assisted by crane or hoist as necessary. Assembles limited types of mechanical or fabricated parts to produce sub-assemblies or complete units, using various hand tools and simple machine tools. Follows sequence of operations as established by precedent or as instructed. Works from simple prints. May have aid of a helper or may assist Assembler "A". Performs hydrostatic tests of vessels, jackets, and related equipment. Prepares vessels and other equipment for shipment. Maintain a clean, orderly, and safe work area. Perform other similar duties as assigned. Requirements of Paint Applicator: Types of Equipment: A. Airless Spray Equipment - bulldog style hydraulic pumps, B. Compressed Air Atomized Spray Equipment, C. Electrostatic Spray Equipment - air and airless, D. Manual application equipment - brushes, rollers, etc. Types of Coatings to be applied: A. Chlorinated Rubbers, B. Enamels, C. Epoxies (standard and severe service), D. Phenolics, E. Urethanes, F. Zinc-rich Primers, G. High build glass filled coatings, H. Others as required to meet customer specifications. Responsibilities: •Proper mixing and thinning of all coatings. o Determine proper viscosity of coating prior to application. •Check status of required coatings as required to maintain production schedule. •Use proper protective clothing and equipment in keeping with OSHA regulations. •Maintain work area in a neat, clean and orderly manner. • Maintain equipment on a regular basis to assure proper operation. o Daily preventive maintenance of pumps, guns and lines shall be performed including rebuilding guns and changing orifices, tips and nozzles to suit various coatings. o Monitor availability of repair parts and inform supervisor as needs arise . o Clean and/or replace filters and lubricate hydraulic pump equipment on a regular basis including changing seals and packing. •Rigging and safe movement of glassed and alloy vessels with overhead cranes, chains and slings. (Pennant crane controls) •Masking and proper preparation of electric and hydraulic drive equipment and the preparation and protection of glassed surfaces. •Meeting paint specifications including wet and dry film thickness and recoating of primer and intermediate (guide) coats. oCapable of using acceptable mil gauges to determine acceptable thickness of coatings. •Use of grinders to remove weld spatter as needed before painting. •Must be qualified for tow motor license and operate forklift as needed. •Maintain paint storage shed in an orderly manner and monitor stock paints and thinners to maintain adequate supply. •Operate can crusher to facilitate proper disposal of paint cans. •Assist Assemblers doing final prep work on tanks prior to shipping. •Maintain annual certification for hazardous waste handling and follow SOP's as it pertains to the paint area. Certifications/Requirements: Crane Operation, Tow Motor, Walkie, Saw, Nail Gun Housekeeping: Keeps area clean and puts tools away Attachment: Physical and non-physical aspects All members of the group will follow all current standard operating procedures. All members are responsible for the quality of their workmanship and must follow all safety and housekeeping procedures and work in a safe manner at all times. All members of the group will train others in the various functions. Employer's Disclaimer: All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor. This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship and in accordance with the Collective Bargaining Agreement.

Role: Slalom Flex (Project Based) - Technical Engineer (Pega) Who You'll Work With Our teams help organizations of all kinds redefine what's possible, give shape to the future - and get there. We focus on high-impact projects, meeting our clients where they are to uncover business needs and deliver results. Our teams go beyond the expected to help clients move confidently through ambiguity and risk and drive more transformative outcomes. The Technical Engineer with strong Pega expertise will focus on designing, building, and optimizing enterprise workflows on the Pega Platform, ensuring high performance, security, and scalability. What You'll Do * Design and Build: Develop case types, flows, UI rules, and data models on Pega Platform (v7.x / v8.x). * Integrations: Implement and troubleshoot integrations (REST, SOAP, APIs, MQ, databases). * Performance & Security: Conduct performance tuning and enforce security/access control best practices. * Collaboration: Work within Agile/Scrum teams, partnering with business analysts, QA, and DevOps. * Consulting Excellence: Translate business requirements into technical solutions and provide clear recommendations to stakeholders. What You'll Bring * Strong expertise in Pega Platform (v7.x / v8.x). * Proven experience as a Technical or Lead Pega Architect on large-scale implementations. * Deep understanding of: * Case Management, Flows, and UI rules * Data modeling and decisioning * Pega performance tuning and optimization * Security and access control * Hands-on experience with integrations (REST, SOAP, APIs, MQ, databases). * Experience with Agile/Scrum methodologies. * Experience with Pega migrations and upgrades. * Pega certifications such as: * Pega Certified Lead System Architect (CLSA) * Pega Certified Senior System Architect (CSSA) * Familiarity with cloud platforms (AWS, Azure, or GCP). * Exposure to DevOps tools and CI/CD pipelines. * Experience in regulated industries (Financial Services, Healthcare, Insurance). * Consulting experience. About Us Slalom is a fiercely human business and technology consulting company that leads with outcomes to bring more value, in all ways, always. From strategy through delivery, our agile teams across 52 offices in 12 countries collaborate with clients to bring powerful customer experiences, innovative ways of working, and new products and services to life. We are trusted by leaders across the Global 1000, many successful enterprise and mid-market companies, and 500+ public sector organizations to improve operations, drive growth, and create value. At Slalom, we believe that together, we can move faster, dream bigger, and build better tomorrows for all. Compensation and Benefits Slalom prides itself on helping team members thrive in their work and life. As a result, Slalom is proud to invest in benefits that include meaningful time off and paid holidays, parental leave, 401(k) with a match, a range of choices for highly subsidized health, dental, & vision coverage, adoption and fertility assistance, and short/long-term disability. We also offer yearly $350 reimbursement account for any well-being-related expenses, as well as discounted home, auto, and pet insurance. Slalom is committed to fair and equitable compensation practices. For this position, the hourly pay range is $65 to $90/HR depending on experience. Actual compensation will depend upon an individual's skills, experience, qualifications, location, and other relevant factors. The hourly pay range is subject to change and may be modified at any time. EEO and Accommodations Slalom is an equal-opportunity employer and is committed to attracting, developing and retaining highly qualified talent who empower our innovative teams through unique perspectives and experiences. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veterans' status, or any other characteristic protected by federal, state, or local laws. Slalom will also consider qualified applications with criminal histories, consistent with legal requirements. Slalom welcomes and encourages applications from individuals with disabilities. Reasonable accommodations are available for candidates during all aspects of the selection process. Please advise the talent acquisition team if you require accommodations during the interview process. We will accept applications on an ongoing basis through January 23, 2026

Job

Job Title: Assembler Reports To: Manufacturing Supervisor Level of Work: I Working with blue prints, assembly drawings, specifications, sketches, and verbal and written instructions, assembles, disassembles, repairs and adjusts a variety of units, attachments, components and/or accessories. Reports directly to Production Supervisor or his/her designate. Key Results Areas by level of work Level I: Quality - Complete and accurate work performed efficiently 1. Production quality and efficiency using appropriate tools and equipment, qualified to perform special processes as needed a. Working on assembly operations, sub assembly operations, attachments and/or accessories. b. Size of positioning of work may require incumbents of this position to operate a variety of material handling equipment including jibs, overhead cranes, and their accessories. c. Uses an assortment of measuring tools d. Consistently meets customer's quality requirements and expectations. 2. Follow instructions - oral and/or written a. Can properly read all blueprint and work instructions b. Will provide instruction and guidance to employees assigned to assist and as required, will participate in training of welders and other employees of the department of lesser classification. c. Performs other duties as assigned by the Production Supervisor, weld shop, or his/her designate. 3. Safety & housekeeping a. Work may require use of scaffold, ladders, forklift, and/or scissor lift. b. Work may require the use of a crane to move part. c. Maintains a clean work area with no clutter. d. Practices safety at all times while at work. e. Follows safety policies and procedures and speaks up when others are non-compliant. f. Wears all safety equipment for area of work. 4. Continual Improvement suggestions a. Keeps an open mind to others continuous improvement suggestions b. Bring continuous improvement suggestions to the appropriate team member. 5. Professional Development a. Demonstrates initiative, positive attitude, and enthusiasm for the job b. Will follow up with supervisor on professional development goals and opportunities Takes an interest and lets it be known that they have a desire to grow with the company Requirements Qualifications: To qualify for this position, an individual must possess the knowledge, training, experience and abilities required. Education and Training * Technical Trades School in Welding * High school GED Required Experience: * 1+ years of Assembly experience. Other: * Must be willing to work overtime as required. * Minimal travel may be required Skills: To perform the job successfully, an individual should demonstrate the following competencies: 1. Ability and willingness to abide by set policies and/or safety programs established by GHM, our clients, and/or regulatory agencies which govern our performance and behavior in the normal course of our work while on GHM or the client's property or job site. 2. Strong organization and time management skills. 3. High attention to detail. 4. Demonstrate behavior consistent with company values. 5. Ability to work independently, with minimal direction as a highly motivated self-starter and within a team oriented culture. 6. Exhibits polite and professional communication via phone, e-mail and mail. 7. Follows instructions, responds to management direction; takes responsibility for own actions; keeps commitments; commits to long hours of work when necessary to reach goals; completes tasks on time or notifies appropriate person with an alternate plan. 8. Maintain a collaborative relationship with internal and external stakeholders. 9. Obtains support and cooperation from others and reciprocates; demonstrates positive behaviors, displaying tact, respect, and understanding when dealing with others; proactively engages and confronts issues to achieve continual improvement. 10. Meets challenges with resourcefulness, generates suggestions for improving work; develops innovative approaches and ideas; presents ideas and information in a manner that gets others attention. 11. Demonstrates pride in workmanship and commitment to continual quality improvement; maintains clean, organized work area; maintains accurate and timely labor reporting; makes improvement based on lessons learned; maintains strict adherence to quality system requirements. 12. Ability to add, subtract, multiply, divide in all units of measure, using whole numbers, common fractions, and decimals. 13. Ability to thrive in a team environment. Physical and Mental Demands The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Physical demands: While performing the duties of this position, the incumbent is primarily required to sit, stand, walk, stoop, and bend. Required to speak and communicate clearly with others. Corrected vision to 20/20 or adequate and ability to identify and distinguish colors. * Mental demands: While performing the duties of this position, the incumbent is required to read, write, analyze data and reports, exercise judgment, develop plans, procedures and goals, present information to others and work under pressure. * Work Environment: While performing the duties of this position, the incumbent is also exposed to high level of manufacturing and equipment noise. Duties are performed indoors in a manufacturing environment with temperature changes. Exposure to hazardous materials, fumes or airborne particles and moving mechanical parts with vibration. Work Authorization Must be able to work in the U.S without sponsorship. Salary Description $25.00-$28.00/hour

The Integration and Test department is looking for an experienced Electrical Engineering Technician. Working under general supervision, the Technician will apply their knowledge of Electrical Technology and Electronics to engage in functional testing, verification and validation of electronic, electro-mechanical and electro-optical systems. Test involvement will include but is not limited to test preparation, test execution, operation of custom test sets, operation of test-related equipment, recording data and reporting data. The candidate will provide support for product testing as well as set up and integration of test equipment. This will be an on-site position as remote support is generally not possible due to the nature of the testing environment. Qualifications: •Must be U.S. Citizens and be willing to submit to a background investigation, as a government security clearance might be required for this position. •Willingness to work overtime, shift work, weekends and holidays. •Requires HS Diploma or GED and a minimum of 4 years manufacturing/production experience. •Must be able to read engineering drawings/blue prints/schematics and detailed work instructions. •Ability to maintain accurate records and manufacturing documentation. •Speaks clearly and concisely, presenting ideas effectively to individuals or groups. •Ability to identify problems and suggest solutions. •Demonstrates appropriate computer knowledge. •Understands and adheres to established policies, procedures and proper labor charging practices. •Must be able to perform as an individual contributor as well as within a team environment. •Must be detailed oriented. •Security Clearance required upon hire: Ability to Obtain •Security Clearance required for role: Ability to Obtain Preferred Additional Skills: •Associate's degree in related field with 0-2 years experience. •Demonstrated experience working with electronics test equipment to include multimeters, oscilloscopes, and cables. •Demonstrated experience with programming languages such as JavaScript, C++, Python, etc. •Experience with Mate/De-mate of Flight cables •Understanding of Lean Manufacturing practices. •Experience working in the Aerospace or Defense industry. •Experience in manufacturing and/or prototyping environment. •Experience working in a cleanroom environment. •Active Security Clearance (TS/SCI)

Looking for a fresh start? A company help grow your skillset and advance your career? Apply Today! We are happy to speak with you about your experience and how you may be a fit within our teams. Lots of exciting things are happening at KDP and we'd love for you to be a part of it! Want to see more? Click the link to visit our website to view some awesome, short clips and information to show you what we're all about KDP Company Overview. You may also view all of our current openings on our Careers Page: KDP Careers - Williamson, NY About the facility: The Williamson, NY operation is a roughly 1 million sq ft production facility with 217 acres of land. The site is the Home of the Brand Motts that has been delighting our consumers for more than 140 years. We produce a wide variety of products with diverse packaging capabilities going from Apple sauce, to juices and concentrates . Alongside production, the site includes a raw apple operation that is key for the success of the site. This facility is a Unionized location. We are adding to our facility and have lots opportunity to grow and learn our industry! Production Technician I - Williamson, NY The Production Technician I is responsible for operating and monitoring production machinery to maximize production and maintain KDP's high standards in safety and quality. This role will also be engaged in supporting improvements to the manufacturing process in the areas of safety, quality, delivery, productivity and growth. Shift and Schedule: This is a union facility so flexibility to work any day or any night shift pattern is required. Positions are mainly 8 hour positions, with few 12 hour shifts available but not guaranteed; based on seniority. 6:00pm - 6:00am 2:00pm - 10:30pm 10:00pm - 6:30am Position Responsibilities: Maintain a safe and healthy environment, demonstrating safe behaviors at all times. Understand and help drive improvement to quality systems and policies (Quality Data System, Safe Quality Food, Good Manufacturing Practices and Hazard Analysis Critical Control Points). Learn to safely operate and monitor high-speed production equipment. Actively engage in resolving production line issues, executing and developing standard work, tracking production data, and participating in KDP's lean daily management process. Actively learn and participate in formal problem-solving processes with team members. Generate productivity and continuous improvement ideas. Demonstrate KDP values of Team First, Deliver Big, Think Bold, Being Fearless and Fair. Total Rewards: Pay starting at $22.25 per hour plus a $0.60 shift differential Where Applicable: Benefits eligible day one!! Benefits, subject to eligibility, and collective bargaining agreements (where applicable): Medical, Dental, Vision, Disability, Paid Time Off (including vacation and sick time), 401k with company match, Tuition Reimbursement, and Mileage Reimbursement Requirements: Ability to lift up to 35 pounds and 50 pounds occasionally. Ability to bend, stretch and stand during entire shift. Ability to frequently kneel, squat, climb stairs/ladders, bend, stoop, twist, and reach overhead with repetitive motions. Ability to work in a variety of temperature and humidity conditions. Company Overview: Keurig Dr Pepper (NASDAQ: KDP) is a leading beverage company in North America, with a portfolio of more than 125 owned, licensed and partner brands and powerful distribution capabilities to provide a beverage for every need, anytime, anywhere. We operate with a differentiated business model and world-class brand portfolio, powered by a talented and engaged team that is anchored in our values. We work with big, exciting beverage brands and the #1 single-serve coffee brewing system in North America at KDP, and we have fun doing it! Together, we have built a leading beverage company in North America offering hot and cold beverages together at scale. Whatever your area of expertise, at KDP you can be a part of a team that's proud of its brands, partnerships, innovation, and growth. Will you join us? We strive to be an employer of choice, providing a culture and opportunities that empower our team of ~29,000 employees to grow and develop. We offer robust benefits to support your health and wellness as well as your personal and financial well-being. We also provide employee programs designed to enhance your professional growth and development, while ensuring you feel valued, inspired and appreciated at work. Keurig Dr Pepper is an equal opportunity employer and recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, gender identity, gender expression, age, disability or association with a person with a disability, medical condition, genetic information, ethnic or national origin, marital status, veteran status, or any other status protected by law. A.I. Disclosure: KDP uses artificial intelligence to assist with initial resume screening and candidate matching. This technology helps us efficiently identify candidates whose qualifications align with our open roles. If you prefer not to have your application processed using artificial intelligence, you may opt out by emailing your resume and qualifications directly to **************** in lieu of clicking Apply. Please include the job title and location or Job ID # in the email subject line.

Adecco is now hiring for Manufacturing Assemblers with our client in Newark, NY. Weekly pay starts at $16.50 per hour. This position is entry-level and requires experience using hand and power tools, as well as the ability to lift up to 20 lbs. Apply today and join a dynamic team! Assemble battery components to specifications, ensuring quality and precision Inspect products for defects and report issues Safely operate hand tools and machinery Maintain accurate records Follow safety protocols Pay Details: $16.50 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Gorbel's mission is simple: We improve people's lives. That mission guides everything we do, from the products and service we provide to our outside customers to the work environment we foster for our employees. We are a manufacturer of material handling and fall protection products for the production and warehouse/distribution sectors. We're on the cutting edge of manufacturing and distribution; a thriving, growing company that is constantly seeking out new ways to innovate and elevate our products and our processes - and we're looking for people like you to join us in that mission. We're currently hiring for open positions in the US and Canada. We operate in Canada as Engineered Lifting Systems and Equipment (ELS)/DBA Gorbel Canada, and subsequent communication related to Canadian positions may show the ELS name. You may be contacted by phone by recruitment personnel based in either Canada or New York. Work Shift: First Shift (United States of America) Job Description: The Electrical Mechanical Assembler is responsible for the assembly of control panels. Assembler utilizes stock electrical and mechanical components to build custom panels per job instructions. Works with little or no supervision. Interaction with Technicians or the Engineering Department may be required, depending on the complexity of the design. Responsibilities Build or assemble non-electrified and electrified components by following the specified directions from the job paperwork Required to test and initial electrified components for function Submit requests for replacement tooling or supplies Debug and troubleshoot electrical problems Complete inventory cycle counts as needed Ensure all documents are filled out completely All other duties as assigned by management Qualifications: High school diploma or equivalent required Must be able to pass truck and crane certification with training upon hire Computer knowledge of Microsoft Windows, Word, Excel, and other computer programs Ability to read a tape measure Ability to read a blueprint Ability to use hand tools requiring dexterity Must be able to communicate effectively with factory supervision Work Environment:ADA Physical/Mental/Workplace Requirements Able to lift and/or move up to 50 pounds. Able to stand (75%); walk (20%); stoop, kneel or crouch (5%), as required. Able to climb portable ladders Able to wear safety glasses and foot protection throughout shift. Able to wear hearing protectors (ear plugs) throughout the shift while working in an environment with moderate noise levels. Gorbel is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, disability or handicap, gender, marital status, veteran status, sexual orientation, genetic information, arrest record, or any other characteristic protected by applicable federal, state or local laws. Gorbel is also committed to providing reasonable accommodations to qualified individuals so that an individual can perform their job-related duties. If you are interested in applying for an employment opportunity and require special assistance or an accommodation to apply due to a disability, please contact us at ************. The wage range for this role takes into account the wide range of factors that are considered in making compensation decisions, including but not limited to skill sets, experience and training, licensure and certifications, and other business and organizational needs. At Gorbel, it is not typical for an individual to be hired at or near the top of the range for their role, and compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current range is: Electrical/Mechanical Assembler I: Min $17.59 - Max $26.39 Electrical/Mechanical Assembler II: Min $19.74 - Max $29.62 Electrical/Mechanical Assembler III: Min $21.42- Max $32.14 #ZR