Assembly technician jobs in Irving, TX

- 607 jobs

All

Assembly Technician

Assembler

Production Technician

Assembly & Test Technician

Engineering Technician

Aircraft Assembler

Mechanical Assembler

Assembly Specialist

Electronic Assembly Technician

Low Voltage Switchgear Assembler
Solectron Corp 4.8
Assembly technician job in Dallas, TX
Job Posting Start Date 12-02-2025 Job Posting End Date 02-11-2026 Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. Job SummaryTo support our extraordinary teams who build great products and contribute to our growth, we're looking to add a LV Switchgear Wiring Technician located in Dallas, Texas. Reporting to the Production Manager, the LV Switchgear Wiring Technician role is responsible for prepping wiring subassemblies for our switchgear projects. Shift: 6:00 AM - 2:30 PM What a typical day looks like: Read and interpret work orders, manufacturing procedures, work instructions, wiring diagrams, and prints to manufacture wiring subassemblies for relay and control panels Crimp, strip, cut, pull, and bundle wiring according to plans Ensure wiring is properly labeled and marked Connect cut wires to components, and routing the wire and cables in an orderly fashion Ensure quality workmanship of all wires and components Maintain a safe, clean, and orderly work area Complete other duties as assigned The experience we're looking to add to our team: High school diploma or equivalent 1-2 years of experience in wiring or installing electrical components OR completion of a technical vocational program Strong attention to detail and ability to perform work accurately Knowledge of manufacturing, equipment maintenance, and safety management Reading comprehension skills with the ability to interpret and follow written directions, blueprints, and engineering diagrams Basic math skills to meet technical specifications and measurements Basic understanding of tools (ex. Tape measure, impact drill, wire crimpers, etc.) Physical Requirements: Prolonged periods of standing, bending, kneeling, and performing repetitive tasks. Must be able to lift up to 35 pounds at a time. Must have manual dexterity in order to assemble products or machines as directed. Must have excellent hand-eye coordination. Ability to differentiate between colored wires, tabs, and electronic components. Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Job CategoryOperations Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).
$25k-32k yearly est. Auto-Apply 18d ago
Assembly Technician
Iewc Us 3.7
Assembly technician job in Carrollton, TX
Responsibilities: **Breakout**: The operator must read technical schematics and strip the cable to the required length. **Prep**: The operator must strip the end of the breakout, apply numbered labels, and rubber boots. **Cleaving**: The operator must cleave the very tip of the fiber using a specialized scope. **Polishing**: The operator must follow a preset polishing recipe, use proper sanding pads, and ensure no dirt or spots are visible. **Testing**: The operator is required to test all connectors and ensure they meet testing requirements. Willing to train! Required Experience: Must have a high school diploma or GED. Ability to showcase a positive attitude. Willing to learn and be part of a team environment. Preferred Experience: Previous experience within a manufacturing environment. Ability to read, write and understand English. Familiarity with fiber optics systems and components. Ability to read and interpret technical schematics. Proficiency in connecting, maintaining, and troubleshooting fiber optics systems. Knowledge of optical fiber testing and measuring equipment. Benefits: Eligibility FIRST DAY for medical, vision and dental benefits! Employee Stock Option Program Eligibility Vacation Time...and MORE!
$32k-37k yearly est. 60d+ ago
Fabrication Frame Assembly Technician - Nights
Oldcastle Buildingenvelope 4.2
Assembly technician job in Terrell, TX
What You'll Get to Do The Frame Assembly Technician Nights is focused on creating a final door and reports to the Custom Door Supervisor. This role is perfect for an individual who is responsible, attention to detail, with good attendance. A vital member of the Custom Door Department, this is an opportunity to build a career with an industry leader. Job responsibilities include: This position is responsible for general fabrication and assembly of doors using hand and power tools, quality inspections as well as other duties which may be assigned Qualified candidates must be able to work 2nd shift with periods of required over time Multitask, prioritize and work under time constraints Must be a team player and willing to be trained to work in other areas as assigned What We Are Looking For: Experience using and reading a tape measure to the 16th's Experience reading and understanding fabrication drawings Experience using powered industrial tools Must be a team player and willing to be trained to work in other areas as assigned Stand and walk for entire shift on concrete, up to 11 hours Stand, stoop, bend twist for long periods of time Grasp, squeeze, hold/handle thin to thick metal, hand/power tools, small parts & large items Reach, handle, grasp & turn and lift using upper body while moving Lift, push, pull or move 20-30 lbs consistently and up to 50 lbs periodically Visual acuity to inspect aluminum and product for various quality flaws What OBE Offers You Benefits that benefit you - industry competitive benefits at the lowest cost to the employee Work-life balance - PTO and holidays, including floating holidays you can choose Compensation that rewards your hard work - A pay-for-performance culture with potential for annual raises and bonuses Training - We will equip you with the knowledge and skills you need to succeed OBE is an Affirmative Action and Equal Opportunity Employer. EOE/Vet/Disability--If you want to know more, please click on this link. Oldcastle BuildingEnvelope is an E-Verify Employer.
$31k-36k yearly est. 60d+ ago
Assembly/Rebuild Technician
Exodus Global 4.0
Assembly technician job in Cleburne, TX
Job Details Cleburne, TX Full Time $22.00 - $25.00 Hourly Day ManufacturingCompany Overview & Job Description Exodus Global is a privately held, family business with deep ties to Superior, Wisconsin. Exodus Global and its companies, ShearCore, BladeCore, Connect Work Tools, OilQuick Americas, and now RockZone Americas, have invested in state-of-the-art equipment and a world class manufacturing facility. Our core focus is to have a positive impact on our company, the communities we operate in, and the industries we serve. We do this by focusing on our core values that include caring - caring about the customer, the company, and each other. An “ on it ” attitude - on it to work hard, to communicate and to always be thorough. Always does the right thing - we take integrity in our work, we do the right thing even when it's painful, and we always keep safety at the forefront. Lastly fun - we are company that believe in having fun at work and making a positive impact on all that we serve. We're looking to add to our company people who value integrity, believe in teamwork, and understand that we aren't just a business…we're a family. Assembly/Rebuild Technician job summary The Assembly/Rebuild Technician is responsible for assembling, inspecting, testing, and documenting the condition of hydraulic components and systems to ensure they meet quality and performance standards. The ideal candidate will have a strong mechanical aptitude, experience with hydraulic systems, and the ability to read technical drawings and schematics. Job Duties and Responsibilities Responsible for assembling components Applying decals Filling out paperwork indicating completion of task Will be cross trained to work in various stages of assembly/rebuild within the work area Will be trained in the diagnosis and rebuild of hydraulic attachments Education & Qualifications Education, Qualifications, and/or Certifications Minimum of 2 years mechanical experience Must possess a valid driver's license Knowledge Skills and Abilities - These are the essential skills required to succeed in this role Proficient use of hand and powered tools, air and electric. Read and understand prints and assemble components according to instructions Strong communication skills with the ability to work with others Follow directions and work with minimal supervision Ability to read measuring tools (calipers, micrometers) Preferred Candidates Experience with hydraulic assembly/rebuild Understanding assembly/rebuild processes and principles
$22-25 hourly 60d+ ago
Manufacturing Assembly Specialist
Aereos
Assembly technician job in Euless, TX
Job DescriptionSalary: $21-$25 p/hr DOE Manufacturing Assembly Specialist Pay: $21-25 p/hour depending on experience Schedule:Full-Time (8-5) Benefits available 1st month following 30-days of employment Sponsorship is not available for this position Must be able to Read, Write and Speak English About the Role We are seeking a skilled Manufacturing Assembly Specialistto join our production team. This role is responsible for assembling mechanical components, interpreting engineering drawings, performing precise measurements, and ensuring high-quality builds across a variety of manufactured products. This position requires excellent attention to detail, strong mechanical aptitude, and the ability to work with standard manufacturing tools and equipment. Key Responsibilities Assemble mechanical parts and components according to engineering drawings, work instructions, and specifications. Read and interpret drawings, blueprints, dimensions, and toleranceswith accuracy. Perform layout, drilling, tapping, deburring, and general mechanical assembly tasks. Use a variety of hand tools, power tools, and measurement instruments(calipers, micrometers, height gauges, torque wrenches, etc.). Inspect completed assemblies for quality, fit, accuracy, and compliance with requirements. Follow standardized work instructions and contribute to the continuous improvement of assembly processes. Collaborate with production, quality, and engineering teams to resolve issues or discrepancies. Maintain clean, organized, and safe work areas in accordance with 5S and safety standards. Accurately record production data, completed work, and any nonconformances. Qualifications 2+ years of hands-on experience in manufacturing, mechanical assembly, machining, or related technical work. Strong ability to read blueprints, drawings, GD&T callouts, and dimensional requirements. Proficiency with basic measurement tools(calipers, micrometers, tape measures, etc.). Ability to use a wide range of hand tools and shop toolssafely and effectively. Solid understanding of mechanical components and assembly practices. Good communication skills and ability to work in a fast-paced production environment. High attention to detail, quality mindset, and commitment to accuracy. Preferred (Not Required) Experience in precision manufacturing, metal fabrication, machining, or aerospace components. Familiarity with AS9100 or ISO 9001 manufacturing environments. Ability to perform simple fixture setups or assist machining teams.
$21-25 hourly 7d ago
Mechanical Assembler - 2nd shift
Us Tech Solutions 4.4
Assembly technician job in McKinney, TX
**Job Title: Mechanical Assembler** **Duration: 12 Months Contract** **Shift: 2nd Shift, Monday - Friday, 2:00 PM - 10:30 PM** **Job Details:** **Training:** Classroom will be done on 1st shift ( 8am) and On-the-Job Training is completed during daytime hours before transitioning to the assigned shift, timeframe to be determined **Description 1 - Thick Films/Lids Group** **Job Overview:** This position is part of the Thick Films/Lids Group involved in wafer fabrication and related processing activities. The selected candidate will be responsible for manual tasks, operating semi and automated processing equipment, and performing rework. The role will include using microscopes, adhering to detailed written work instructions, and documenting non-conformances in our Factory Operating System (FOS). **Key Duties:** - Setup shop orders and operate ovens - Perform manual assembly and soldering tasks - Use microscopes for inspection and precision tasks - Follow detailed written work instructions - Create non-conformances and rework in FOS - Complete annual training requirements on safety, hClientardous materials, and quality systems **Required Skills:** - Experience in manufacturing, microelectronics, aerospace, or defense industries - Ability to read and interpret engineering drawings - Basic computer (MS Office) and math skills - Attention to detail and manual dexterity - Ability to follow detailed work instructions and adhere to quality standards **Desired Skills:** - Experience working with microscopes - Soldering experience to Military/ANSI/J standards - Microelectronics or manufacturing industry experience - Strong focus on safety and teamwork. **Description 2 - Radiator/Circulator Operator** **Job Overview:** This position is part of the Radiator/Circulator Operator team, focusing on manufacturing tasks related to radiator and circulator production. The candidate will work with production resources and teammates to meet production goals while ensuring the highest quality standards. The role will include using automated equipment, following detailed work instructions, and documenting non-conformances. **Key Duties:** - Setup shop orders and operate processing equipment - Perform manual assembly tasks and operate ovens - Use microscopes and other tools for inspection - Follow detailed written work instructions - Complete non-conformance documentation in FOS - Complete required annual training in safety, hClientardous materials, and quality systems **Required Skills:** - Experience in manufacturing, microelectronics, or related fields - Ability to read and interpret engineering drawings - Basic computer (MS Office) and math skills - Strong time management skills and ability to multi-task - Attention to detail and manual dexterity - Ability to work with production resources to meet goals **Desired Skills:** - Knowledge of 6 Sigma, Kaizen, or Lean Manufacturing - Experience working with diverse teams - Experience in manufacturing or microelectronics - Strong safety focus and positive attitude **Education & Experience Requirements (Both Positions):** - Education: High School Diploma or equivalent (e.g., GED) or vocational/technical education in a related discipline - Experience: Typically requires 2+ years of relevant experience **About US Tech Solutions:** US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit *********************** (*********************************** . US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. **Recruiter Details:** Name: Mirza Email: ******************************** Internal Id: 25-36194
$27k-33k yearly est. Easy Apply 60d+ ago
Production Technician (2nd Shift, 1p-9:30p)
The Coca-Cola Company 4.4
Assembly technician job in Dallas, TX
City/Cities: Dallas Travel Required: 00% - 25% No Shift: Second Shift (United States of America) It's an exciting time to work in The Coca-Cola Company's flagship market. We're accelerating our momentum as the fastest-growing large consumer goods company in North America by putting people at the heart of our business and everything we do! As the Production Technician, you will perform position-related tasks in the manufacturing of our beverages. Function Related Activities and Key Responsibilities Operate Filler/Packaging/Box-forming/Palletizing Equipment Load packages, containers onto machines Supply line with raw materials needed Check for proper filling, seals, damaged product Move filled containers/packages to storage Records statistical data and number of containers filled Rework product if damaged containers (leakers) or pour up waste syrup Wash equipment between flavors and clean and sanitize equipment Perform preventative maintenance and clear jams on machines as needed Forklift operations/inspections Full compliance with Quality Management System (QMS), Environmental Management System (EMS), Safety Management System (SMS) and Food Safety Management System (FSMS) requirements. Education and Qualifications High School Diploma or GED Preferred 0 - 1 year of General Work Experience Prior Warehouse experience useful Ability to operate a manual/powered pallet jack or lift product is preferred. Job Location and Work Conditions: Work is performed mostly on production floor. Work is of repetitive nature and requires exposure to moderate noise levels, confined spaces, working around moving equipment, wetness, fumes; hazardous chemicals. Associates subject to extreme heat and cold. This is a multi-shift operation. The Coca-Cola Company will not offer sponsorship for employment status (including, but not limited to, H1-B visa status and other employment-based nonimmigrant visas) for this position. Accordingly, all applicants must be currently authorized to work in the United States on a full-time basis and must not require The Coca-Cola Company's sponsorship to continue to work legally in the United States. Skills: Pay Range: $46,000 - $50,000 Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Our Purpose and Growth Culture: We are taking deliberate action to nurture an inclusive culture that is grounded in our company purpose, to refresh the world and make a difference. We act with a growth mindset, take an expansive approach to what's possible and believe in continuous learning to improve our business and ourselves. We focus on four key behaviors - curious, empowered, inclusive and agile - and value how we work as much as what we achieve. We believe that our culture is one of the reasons our company continues to thrive after 130+ years. Visit Our Purpose and Vision to learn more about these behaviors and how you can bring them to life in your next role at Coca-Cola. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class. When we collect your personal information as part of a job application or offer of employment, we do so in accordance with industry standards and best practices and in compliance with applicable privacy laws.
$46k-50k yearly Auto-Apply 5d ago
Entry Level Assembly
Staff Right 4.0
Assembly technician job in Rockwall, TX
CHR Holdings, Inc. as philosophy is to foster a friendly and value oriented partnership with our clients and our associates. Our vision statement is simple: We offer a specialized staffing solution, which helps increase productivity & quality, reduce costly turnover and provide exemplary customer service. The following is a listing of our Dallas-Ft. Worth locations: Job Description HIRING TODAY!!! WE HAVE THE IMMEDIATE NEED TO HIRE 20 PEOPLE FOR AN ENTRY LEVEL ASSEMBLY POSITION. Staff-Right is seeking great talent to join our team to support one of our premier national Clients. Are you tired of only making MINIMUM WAGE? Are you a hard Worker? If this is for you, let me help you in taking the next step…… Here is some information as to the role for your review: • No Experience needed, we will train you, and give you the opportunity to grow with us! • Must be a minimum of 18 Years of age • Must have reliable transportation to get to the store in your area. DOES THIS SOUND LIKE A FIT FOR YOU? FOR IMMEDIATE CONSIDERATION: CALL, OR EMAIL ME : 972-247-5333 Qualifications **YOU MUST BE ABLE TO PASS BACKGROUND CHECK & DRUG SCREEN!!!** Additional Information How to apply: **YOU MUST BE ABLE TO PASS BACKGROUND CHECK & DRUG SCREEN!!!** If you feel you are a qualified candidate please submit your resume and contact our office asap! Staff-Right 729 North Central Expressway Plano, TX 75075 972-562-5627
$25k-32k yearly est. 6h ago
Assembly Technician 1
Natural Gas Fuel Systems LLC 4.8
Assembly technician job in Roanoke, TX
The Assembly Technician I is responsible for accurate and efficient mechanical assembly of natural gas fuel systems in the different production areas utilizing various material, parts, and sub-assemblies. Assembly will utilize a hands-on approach and usage of tooling and equipment. KEY OBJECTIVES Other duties beyond this representative listing may be assigned to the essential job duties and responsibilities of this position based on Company needs. ESSENTIAL JOB FUNCTIONS Apply in-depth understanding of the flow of material, parts, and assemblies through the manufacturing and assembly process. Read work orders, blueprints, production schedules, and operation sheets to determine sequence of operations and material needed to complete assembly process. Assemble sub-assemblies, structural parts and plumbing for fuel systems. Follow all required steps in the assembly standard work process. Inspect all components for consistency and critical fits during the assembly process. Check all assembly work to ensure a defective free assembly prior to final quality control inspection. Assembly activities will require operating, cleaning, and maintaining different pieces of tooling and equipment. Complete handwritten and electronic documentation for the records and data associated with assembly operations to ensure compliance with all internal, safety, and regulatory requirements. Support and execute Lean assembly activities. KNOWLEDGE, SKILLS, AND ABILITIES The individual must be able to perform each essential duty satisfactorily. It is required that the individual is accurate with good time management and organizational skills. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION AND/OR EXPERIENCE High school diploma or general education degree (GED). Manufacturing experience in a related industry is preferred. Mechanical aptitude is a must. Personal computer skills, familiarity with ERP business systems software required for the specific area of responsibility. Must obtain the Texas Railroad Commission certification for CNG service and installation within 45 days of hire. Must gain proficiency in assigned function on assembly line. If required to drive, for any reason, on behalf of the company, must possess a current and valid driver license with a driving record that meets the insurability guidelines set forth by the company's insurance carrier. LIFTING REQUIREMENTS Lift and carry objects weighing up to 50 lbs. ADDITIONAL INFORMATION The above descriptions are intended to set forth the general nature and level of the work and qualifications required in this position and are not an exhaustive list of all responsibilities, duties, and skills required. Employee must be able to perform the essential functions of the position satisfactory and may be required to perform duties outside of their normal responsibilities from time to time, as needed. If requested, reasonable accommodations may be made to enable employees with disabilities to perform the essential functions of the job, absent undue hardship. As a condition of continued employment, the employee is required to follow Company policies and procedures. Cummins Clean Fuel Technologies and its Affiliate Companies are Equal Opportunity and Affirmative Action Employers.
$30k-36k yearly est. Auto-Apply 35d ago
Cable Assembly Tech-Dallas Tx
Staff-Up LLC
Assembly technician job in Dallas, TX
Job Description STAFF-UP is hiring for Cable Wire Assembler in Dallas, TX 75247! Pay Rate: $18.00HR Shift hours are 8AM Start (Possible rotating shift) We are seeking motivated and detail-oriented Production Operators to join our growing team. The ideal candidates will have experience with prefabricated cable and wire harness. Key Responsibilities: · Assemble prefabricated cables according to drawings and work instructions · Measure, cut, strip, crimp, and label wires and cables · Operate hand tools and machines safely · Inspect assembled products to ensure they meet quality standards · Set up, adjust, and monitor equipment to ensure quality and efficiency. · Perform routine maintenance and cleaning on machines to ensure smooth operation Experience: · Prior experience in wire or cable assembly, cable harness preferred · Ability to read technical drawings and assembly instructions · Good hand-eye coordination and attention to detail · Basic English communication skills (reading, writing, speaking) · Comfortable with standing, bending, and lifting (up to 50lbs) · Strong attention to detail and quality · Mechanically inclined and able to troubleshoot basic equipment issues · Willingness to work overtime depending on order volume Requirements: Cable Wire Assembly : 3 years (Required) Calipers : 2 years (Required) Micrometer: 2 years (Required) cutting and crimping wire : 2 years (Required) Machine operation: 2 years (Required) Ability to Commute: Dallas, TX 75247 Staff-Up, LLC participates in E-Verify
$18 hourly 15d ago
Assembly Tech
Employee Magnets
Assembly technician job in Grapevine, TX
The primary responsibility of this role is to assemble and disassemble parts and subassemblies, conduct inspections, and perform maintenance and repairs as needed. Key Responsibilities: Assemble and disassemble parts and subassemblies following schematics, blueprints, and assembly instructions Conduct thorough inspections to check for defects and ensure assembled products meet specifications Troubleshoot and resolve assembly issues to maintain production quality Utilize a range of hand tools, power tools, and machinery effectively to complete assembly tasks Position and align components manually or using hoists to facilitate accurate assembly Conduct quality control checks to ensure compliance with standards. Prepare for assembly work by studying parts lists and gathering necessary tools and materials Verify specifications by measuring completed components and making adjustments as needed Maintain equipment by performing preventive maintenance and addressing any malfunctions Document production and quality actions by completing necessary forms and reports Skills & Qualifications: Strong understanding of mechanical principles with the ability to work confidently with tools and machinery High attention to detail to ensure accurate assembly according to provided instructions Problem-solving skills to identify and resolve assembly challenges Physical ability to lift and handle heavy objects as part of the assembly process Effective communication skills for interaction with supervisors and team members Experience in mechanical assembly, industrial maintenance, or related fields Commitment to safety procedures and quality control Dexterity and hand-eye coordination for assembling small components. Ability to distinguish different colors as required
$28k-36k yearly est. 60d+ ago
Assembly Seibi Technician
Crosssafety Solutions
Assembly technician job in Dallas, TX
Assembly Seibi Technician Final Assembly (Onsite, 20-Month Contract) San Antonio, Texas About Us At CrossSafety, we provide comprehensive Health & Safety consulting, engineering, and recruitment services across North America. With over 200 professionals supporting clients in industries ranging from manufacturing to logistics, we are committed to integrity, excellence, and innovation in every project. We are currently seeking a highly skilled Assembly Seibi Technician to join the Final Assembly Production Engineering. This is an onsite role with extensive travel and hands-on responsibilities supporting assembly equipment installation, validation, and training. About the Role In this position, you will provide technical and skilled support to the Assembly Final Engineering team. You will be responsible for reviewing equipment specifications and drawings, performing vendor buyoffs, overseeing equipment installation and commissioning, troubleshooting, and training plant personnel on new systems. This role requires strong PLC programming and industrial controls expertise. 🔹 Work Location: San Antonio, Texas 🔹 Contract Duration: 20 Months (Potential Extension) 🔹 Travel: Up to 50% domestic and international (Japan, Canada, Mexico) 🔹 Work Schedule: As required, with occasional overtime (~30%) 🔹 Requirements: Steel toe boots required What You'll Be Doing ✔ Review equipment specifications and design, identify improvements, and conduct vendor buyoffs to confirm equipment functions. ✔ Install, verify, and commission assembly equipment while ensuring safety, quality, and productivity standards. ✔ Investigate, implement, and adjust modifications based on trial results. ✔ Reduce project costs and time by confirming equipment quality at the vendor site before installation. ✔ Oversee vendor installation and facilitate kanban processes to minimize adjustment time during vehicle trials. ✔ Confirm equipment performance using secondary methods (torque checks, vacuum profiles, etc.). ✔ Install, set up, and troubleshoot Toyopuc and Allen-Bradley programmable controllers. ✔ Provide training to Maintenance personnel on new equipment. ✔ Share subject matter expertise with NAMC Maintenance and Production members. What You Bring ✅ 2+ years of PLC programming/troubleshooting experience (Toyopuc, Siemens, Omron, Mitsubishi, Allen-Bradley). ✅ 2+ years comprehensive knowledge of PLC systems, electrical circuits, and industrial controls. ✅ Technical degree or trade school completion in EET, Industrial Maintenance Technology, or equivalent work experience. ✅ Ability to read and interpret mechanical and electrical drawings. ✅ Ability to travel up to 50%, including international travel, and work up to 30% overtime when required. ✅ Physical stamina: ability to lift up to 40 lbs, frequent standing, walking, bending, kneeling, crouching, climbing ladders, and working in hot/cold or confined spaces. ✅ Manual dexterity to operate hand tools, power tools, and machinery. Bonus Skills (Nice to Have) 🔹 2+ years industrial maintenance experience 🔹 Knowledge of industrial robot programming and teaching 🔹 Experience with AGV/AMR setup and programming 🔹 Knowledge of safety scanners and programming 🔹 Familiarity with industrial control networking (EthernetIP, FLNet, ProfiNet, etc.) 🔹 Automotive manufacturing experience Interview Process 📌 One-round STAR/Video interview (60 minutes). 📌 Additional onsite hands-on assessment may be required. 🚀 If you're ready to apply your PLC, industrial controls, and assembly expertise to support cutting-edge automotive production, apply today! Equal Opportunity Employer CrossSafety is committed to fostering an inclusive workplace. Accommodations for candidates with disabilities are available upon request. We thank all applicants for their interest; only those selected for an interview will be contacted.
$28k-36k yearly est. 60d+ ago
Assembly Technician 1
Cummins Clean Fuel Technologies
Assembly technician job in Roanoke, TX
The Assembly Technician I is responsible for accurate and efficient mechanical assembly of natural gas fuel systems in the different production areas utilizing various material, parts, and sub-assemblies. Assembly will utilize a hands-on approach and usage of tooling and equipment. KEY OBJECTIVES Other duties beyond this representative listing may be assigned to the essential job duties and responsibilities of this position based on Company needs. ESSENTIAL JOB FUNCTIONS Apply in-depth understanding of the flow of material, parts, and assemblies through the manufacturing and assembly process. Read work orders, blueprints, production schedules, and operation sheets to determine sequence of operations and material needed to complete assembly process. Assemble sub-assemblies, structural parts and plumbing for fuel systems. Follow all required steps in the assembly standard work process. Inspect all components for consistency and critical fits during the assembly process. Check all assembly work to ensure a defective free assembly prior to final quality control inspection. Assembly activities will require operating, cleaning, and maintaining different pieces of tooling and equipment. Complete handwritten and electronic documentation for the records and data associated with assembly operations to ensure compliance with all internal, safety, and regulatory requirements. Support and execute Lean assembly activities. KNOWLEDGE, SKILLS, AND ABILITIES The individual must be able to perform each essential duty satisfactorily. It is required that the individual is accurate with good time management and organizational skills. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION AND/OR EXPERIENCE High school diploma or general education degree (GED). Manufacturing experience in a related industry is preferred. Mechanical aptitude is a must. Personal computer skills, familiarity with ERP business systems software required for the specific area of responsibility. Must obtain the Texas Railroad Commission certification for CNG service and installation within 45 days of hire. Must gain proficiency in assigned function on assembly line. If required to drive, for any reason, on behalf of the company, must possess a current and valid driver license with a driving record that meets the insurability guidelines set forth by the company's insurance carrier. LIFTING REQUIREMENTS Lift and carry objects weighing up to 50 lbs. ADDITIONAL INFORMATION The above descriptions are intended to set forth the general nature and level of the work and qualifications required in this position and are not an exhaustive list of all responsibilities, duties, and skills required. Employee must be able to perform the essential functions of the position satisfactory and may be required to perform duties outside of their normal responsibilities from time to time, as needed. If requested, reasonable accommodations may be made to enable employees with disabilities to perform the essential functions of the job, absent undue hardship. As a condition of continued employment, the employee is required to follow Company policies and procedures. Cummins Clean Fuel Technologies and its Affiliate Companies are Equal Opportunity and Affirmative Action Employers.
$28k-36k yearly est. Auto-Apply 35d ago
Assembly Technician
Filtration Automation, Inc.
Assembly technician job in Mansfield, TX
Job DescriptionDescription: Installs components to systems after the fabrication process is complete. Wires electrical components. Assists in the testing and final quality verification of systems. Assists in fulfillment by assembling parts before shipping to customers. Assists operators with manufacturing operations. These include deburring, cleaning welds, sandblasting, organizing parts and materials, and producing basic assemblies. They are expected to help in all areas of manufacturing where they are needed, including shipping and receiving, material handling, and building maintenance. Requirements: High School Diploma or equivalent 6+ Months Experience in Production/Manufacturing Reliable Transportation Valid Drivers License Ability to read tape measure proficiently
$28k-36k yearly est. 7d ago
Assembler
Nexeo Staffing
Assembly technician job in Plano, TX
Job Description Assembler - Wind Tunnel Manufacturing | (Long-Term Project) Overtime Available! Nexeo HR is seeking motivated and reliable Assemblers for a long-term opportunity with an industry-leading manufacturer of wind tunnels. This hands-on role offers consistent work in a structured production environment-ideal for individuals with experience in construction or industrial settings. If you're dependable, safety-focused, and open to overtime, this is an excellent opportunity to build stable, long-term experience. Responsibilities • Assemble preformed panel chambers using small power tools • Assist with jobsite tasks and general warehouse cleanup • Adhere strictly to safety protocols and wear proper PPE at all times • Maintain clear and effective communication with supervisors and team members • Work primarily indoors with occasional exposure to outdoor elements • Commit to a 60-hour work week for the duration of the two-year project Qualifications • Experience operating small power tools safely and accurately • Proficiency with basic measuring tools • Basic understanding of warehouse safety practices • Must provide and use own PPE: steel-toe boots, gloves, hearing and eye protection • Physically able to lift up to 50 lbs and move items short distances • Comfortable with standing, bending, kneeling, and squatting for long periods • Willingness to work around dust, noise, fumes, and mechanical equipment • Basic English communication skills Pay $20.00 per hour Schedule Monday-Saturday | 7:00 AM-5:30 PM Pay $20.00 Per Hour Schedule Day Shift | 6:30AM-6:30PM | 5 days between Monday-Saturday Nexeo Benefits • Medical, Dental, Vision, Limited Life, Short-Term Disability. • Refer a Friend Bonus | Other Financial Incentives (Bonuses). • Weekly Pay | Direct Deposit | Rapid Pay Card. • Employee of the Month. • Hassle-Free Job Search: A Nexeo Recruiter is always available to assist you. Questions? Call or Text our office today! With 100+ jobs available, we're sure to find a job for you. 3225 West Airport Freeway Suite 226 Irving, TX 75062 (P) (469) 629-6369 Nexeo provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, sexual orientation, or genetics. In addition to federal law requirements, Nexeo complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Nexeo expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Assembler | Wind Tunnel Manufacturing | Construction Experience | Industrial Assembly | Power Tools | Measuring Tools | PPE | Safety Protocols | Overtime | 60-Hour Work Week | Warehouse Cleanup | Indoor Work | Outdoor Exposure | Physical Labor | Lift 50 lbs | Standing and Bending | Loud Environments | Dust and Fumes | Mechanical Equipment | English Communication | Forklift Certification | OSHA 10 | Blueprint Reading | Electrical Knowledge | AC/DC Circuits | 24 Volt Systems | PLC | Refrigeration Experience | Soldering | Leak Testing | EPA Certified | Welding | MIG | TIG | Aluminum Spool Gun | Brazing | Plasma Cutting | Long-Term Project | Manufacturing Jobs | Nexeo HR | Reliable Workers | Production Environment INDDAL
$20 hourly 14d ago
Millwork Assembler
Boise Cascade Company 4.6
Assembly technician job in Lancaster, TX
Job Description Boise Cascade Company has been in the business of manufacturing wood products and distributing building materials for over half a century. We are one of the largest producers of engineered wood products and plywood in North America and a leading U.S. wholesale distributor of building materials. Because our business is built on relationships, our associates are critical to our success. We are committed to investing in them and that is why we offer a comprehensive benefits package designed to have a positive impact on all areas on your life - from health and well-being, career, and community, to financial security and personal safety, with many benefits beginning on your first day of employment. Please review the responsibilities and needed qualifications below and apply today! Boise Cascade has an exciting opening for a Millwork Assembler! Please review the responsibilities and needed qualifications below and apply today! Shift: Days, M-F Responsibilities Responsible for construction of doors and windows made to order. Check product and raw material specifications (lengths, angles). Set up door machinery and equipment to specifications. Transport raw materials and finished products to and from machinery, equipment and storage area. Load and unload inventory as needed. Apply and understand mathematical calculations and concepts involving fractions, decimals, percentages, etc. May manage and provide reports on production, quality, and order fulfillment process and performance. Maintain good housekeeping in work area. Follow safety programs and ensure compliance of OSHA regulation. May train, assign and oversee work of others and ensure work is complete and built to order specifications. May work with and assist location manager and sales team to promote and describe fabrication process to customers of assigned and new products. May be responsible for raw materials and finished goods inventory, materials order replenishment, and maintaining product pricing. Demonstrate strong commitment to safety, quality, environmental awareness, and continuous process improvement. Perform other duties and responsibilities as assigned. Qualifications Basic Qualifications: HS Diploma, GED or two (2) years equivalent work experience. Must be able to understand and communicate safety and other work related instructions. Alertness and ability to adapt to warehouse routines is required. Warehouse operations environment with considerable physical exertion. Preferred Qualifications: Typically more than three (3) years of experience in related job function. Role may require technical certification, or associates degree. Our Benefits Medical + Dental + Vision Flexible Spending Accounts + HRA 401(k) Retirement Savings Annual Incentives Paid Time Off (20/yr) and holidays (10/yr) Paid Parental Leave
$29k-34k yearly est. 27d ago
Assembly
D-Skilled Staffing
Assembly technician job in Carrollton, TX
Temp Assembly at a cosmetic company *** ALL OF DECEMBER ASSIGNMENT *** no perfume, no nails, no make up , no jewelry doesn't have to speak English Comfortable shoes no drug test needed Misdemeanors are fine Non climate controlled please send someone use to this!! Has to be a light** strong legs can stand all day Also, we need qty. three people for all of December They will sleeve bottles and will need to have excellent eye / hand coordination and speed. The area they are working cannot have moving air as it disturbs the temperature of the heat tunnel equipment. So they need to understand it will be a hot environment. These individuals need to be reliable personnel as it is imperative that we have three people each day in order for us to meet our required output.
$23k-30k yearly est. 2d ago
Assembly Technician
RPM Staffing Professionals
Assembly technician job in Aubrey, TX
Temp Looking for a hands-on role where your attention to detail and commitment to safety make a real impact? Join a fast-paced production team in Aubrey, TX, where precision and teamwork drive success. As an Reel Assembly Technician, you'll contribute to high-quality reel production and have the opportunity to grow your skills in a supportive environment. Key Responsibilities: - Ensure the correct size and quantity of reels are built accurately during the assigned shift - Weigh completed reels and accurately record weights on designated placards - Transport completed reels to the appropriate production line or store them in the assigned storage area - Ensure all necessary materials and supplies are fully stocked and available for the shift - Maintain a clean and orderly work area, free of debris, and proactively identify and report potential safety hazards - Strictly adhere to all safety protocols and procedures for reel assembly to ensure a safe working environment Qualifications: - Strong attention to detail and organizational skills - Ability to follow safety protocols and maintain a safe work environment - Physical ability to handle, transport, and store reels as required - Basic record-keeping skills for documenting weights and inventory - Team player with a proactive approach to maintaining workplace standards Work Environment: - This role involves working in a production or warehouse setting, requiring physical activity and adherence to safety standards. - 12-hour rotating shifts with the ability to work every other weekend. Take pride in your work and join a team that values safety, precision, and collaboration. Apply today to become part of a supportive and quality-focused environment.
$28k-36k yearly est. 60d+ ago
Assembler
Sterling Engineering, Inc.
Assembly technician job in Dallas, TX
Title: Switchgear Assembler Location: Dallas, TXHire Type: Contract to Hire Shift: 6:00 AM - 2:30 PMPay: $18 per hour Benefits: Insurance (Health, Medical, Dental) We are seeking a Low Voltage Switchgear Assembler to join our growing production team. In this role, you will assemble and fit metal parts and components used in power distribution switchgear cabinets. You'll use various hand and power tools to ensure high-quality assembly that meets all engineering and safety standards. Job Duties: Review and interpret blueprints, wiring diagrams, and work instructions to complete assigned assemblies. Assemble and install mechanical components for low-voltage switchgear cabinets. Use hand and power tools (such as drills, impacts, grinders, and screwdrivers) to perform tasks. Conduct quality checks to ensure all products meet specifications and safety standards. Report and document any defects or issues found during assembly. Maintain a clean, organized, and safe work area. Monitor inventory levels for tools and materials at the workstation. Perform additional duties as assigned by the Production Manager. Qualifications: High school diploma or GED required. 0-2 years of experience in assembly or manufacturing preferred. Strong attention to detail and mechanical aptitude. Basic math and measurement skills. Ability to read and interpret blueprints, schematics, and diagrams. Familiarity with tools such as tape measures and drills. Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.
$18 hourly 59d ago
Production Technician
Compass Christian Church 3.2
Assembly technician job in Colleyville, TX
Job Details Colleyville Campus - Colleyville, TX Part TimeDescription The Church: Compass Christian Church is a church of 8,000 and growing. We currently have 5 campuses: Colleyville, Mid-Cities, North Fort Worth, Roanoke & Online. We are one Church with multiple locations. Compass is a strategic, results orientated church, focused on our mission: Navigating People to God. Job Description: The Compass Production Technician assists with Video and Lighting needs for the weekend services. Working Hours: Part Time/Hourly/As Needed We Require: A committed Christian who is comfortable working in a Church environment (Visit mycompasschurch.com to learn about our beliefs, mission, values and vision) with the following qualifications: Responsibilities: Main Weekend Services: Operate Camera or video switcher for the weekend service Assist in training new volunteers Operate lights for the weekend service Assist with troubleshooting technical issues Run A/V systems for outside events as needed and available Compete other task or duties assigned by the Production Director Knowledge/Skills/Abilities: Current with latest best practices of Video & Lighting Work well with the production team and worship team to execute the weekend services at a high level High degree of initiative, accountability and attention to detail Prompt response and resolution to constructive feedback from the Production Director Good problem-solving skills, including ability to identify and avoid potential problems before they happen Ability to manage multiple priorities calmly under pressure and to adjust, when needed, to the changes in priorities or conditions of the fast paced production industry Ability to work independently with minimal supervision, and cooperatively as part of a team Ability to maintain constructive, positive relationships with co-workers Professional attitude and appearance; positive spirit and enthusiasm Qualifications Knowledge/Skills/Abilities: Current with latest best practices of Video & Lighting Work well with the production team and worship team to execute the weekend services at a high level High degree of initiative, accountability and attention to detail Prompt response and resolution to constructive feedback from the Production Director Good problem-solving skills, including ability to identify and avoid potential problems before they happen Ability to manage multiple priorities calmly under pressure and to adjust, when needed, to the changes in priorities or conditions of the fast paced production industry Ability to work independently with minimal supervision, and cooperatively as part of a team Ability to maintain constructive, positive relationships with co-workers Professional attitude and appearance; positive spirit and enthusiasm This Position is part of the production team and will report directly to the Production Director. Only complete application with at least two professional references will be considered.
$24k-32k yearly est. 60d+ ago

Learn more about assembly technician jobs

How much does an assembly technician earn in Irving, TX?

The average assembly technician in Irving, TX earns between $25,000 and $40,000 annually. This compares to the national average assembly technician range of $28,000 to $43,000.

Average assembly technician salary in Irving, TX

$32,000

$25,00010%

$32,000Median

$40,00090%

What are the biggest employers of Assembly Technicians in Irving, TX?

The biggest employers of Assembly Technicians in Irving, TX are:

Industrial Electric
IEWC
Employee Magnets

Job type you want

Full Time

Part Time

Internship

Temporary

Assembly technician jobs in Irving, TX

Low Voltage Switchgear Assembler