Assembly technician jobs in Lynn, MA - 843 jobs

Engineering Technician - Medical Device R&D temp to perm Marlboro, MA Support engineers in the development and testing of single-use medical devices. This hands-on role involves working with Engineers testing prototypes, performing validation and system testing, and accurately documenting results in a regulated environment. Responsibilities Perform validation, strength, and system testing on medical devices Work with tubing and small mechanical components Set up and maintain test equipment; perform basic troubleshooting Document test results and communicate findings to engineers Support calibration and quality documentation requirements Qualifications Associate degree or equivalent hands-on experience 1+ year experience in technical, lab, R&D, or manufacturing role Strong mechanical aptitude and troubleshooting skills Ability to follow procedures and document work accurately Medical device or regulated environment experience preferred.

Production Assembler Amphenol Ardent Concepts is a leading designer and manufacturer of high performance multicoax and coaxial assemblies, connectors, and sockets used in the development of next generation semiconductors and electronics systems. Our core technology is the smallest, fastest, and most electrically efficient compression mount connector technology worldwide. As data rate requirements increase and devices and systems shrink, Ardent Concept's products deliver superior signal integrity in a dense footprint that can be reusable across programs to maximize cost savings. No experience necessary. Willing to train crew members who demonstrate excellent hand/eye coordination with microscopic parts, who otherwise qualify. Candidates that have experience with arts and crafts, small model building, jewelry making, or small intricate mechanical devices may have the skills applicable to work with these micro assembly products. This is a full time, first shift position. The hours are Monday through Thursday, 7:00am to 5:30pm. RESPONSIBILITIES: Micro assembly product lines while working through microscope Prepare and assemble materials, build product subassemblies or final assemblies, plate product. Test and inspect products or subassemblies for functionality and quality. Set up and operate production fixtures and tools in accordance with good manufacturing practices and standard operating procedures. Inspect finished products for quality and adherence to engineering prints. Adhere to all applicable regulations, policies, and procedures for health, safety and environmental compliance. Clean production equipment, products, and work areas. Measure and record data associated with products. Other tasks as assigned by supervisor. QUALIFICATIONS: High level of hand/eye coordination with ability to work extended periods on a microscope Ability to perform mathematical calculations Familiarity with engineering drawings is preferred High school diploma or equivalent Physical agility This job operates in a lab/manufacturing setting. While performing the duties of this job, the employee is frequently exposed to fumes and moving mechanical parts. The noise level in the work environment can be loud. Computers and machines are used, and the employee must be coordinated and have the ability to lift and or move up to 25 lbs. Specific vision abilities required by this job include close, distance, color, and peripheral vision. Must have depth perception and ability to adjust focus.

The Assembler will be primarily responsible for assembling military grade cable products. The Assembler handles a variety of products composed of small, light to medium weight components. The ideal candidate will have strong mechanical aptitude and the ability to assemble small components. The Assembler will be tasked with following established procedures in assembly operations and will work under close supervision using simple assembly and wiring instructions. Specialized training will be provided for this position. The position will report to the Production Manager. We offer generous benefit including medical, dental, life and disability, 401(k), paid holidays and PTO Duties and Responsibilities: The Assembler must have the ability to perform light assembly work requiring high manual dexterity and physical endurance to stand at workstations for the majority of work shift. The Assembler will be responsible for working with verbal and written instructions in English and report any discrepancies. The use of measurement tools such as tape measures, calipers and micrometers (including understanding of fractional measurements) is required Assembler will be assigned to a cell and be responsible for meeting production schedules, processes and instructions. You will be expected to adhere to company policies and procedures and safety protocols Requirements General math skills, able to count and measure. Work history demonstrating good attendance, responsibility, and attention to detail Basic familiarity with bench top machines Ability to read and follow a drawing Understanding of basic cable construction Able to take direction and follow assembly operations and wire lists. Read and understand basic assembly instructions Comprehend written and verbal assignments Ability to work as a team member in a diverse work environment No supervisory responsibilities IPC-620 Certification a plus J-STD-001 Certification a plus Experience preferred but will train the right person Must be a U.S citizen or Permanent Resident for DoD requirements kSARIA is an Equal Opportunity Employer/Disabilities/Veterans PM19

Responsive recruiter Benefits: 401(k) Bonus based on performance Company car Competitive salary Free uniforms Health insurance Paid time off Training & development Vision insurance Opportunity for advancement When a machine breaks in Boston, we're the crew that saves the day. No hoses? No work gets done - and that's where you come in. At PIRTEK Boston, we keep the city's machines moving - from cranes in the shipyards to loaders in the suburbs. When a hose bursts and the job grinds to a halt, we show up, fix it, and get things running again. We're building a long-term crew of problem-solvers who take pride in their work, and we're looking for our next teammate. Why You'll Love This Job Competitive pay + extra for on-call work Paid training - no hose experience needed Company vehicle provided PTO + paid holidays Career growth opportunities Work with a close-knit crew (and join the great North Shore roast beef vs. South Shore bar pizza lunch debate) Who We Are A tight team that jokes around but takes quality seriously Obsessed with solving customer problems - even if it means sending them to a competitor Proud to treat customer machines like our own Focused on win-win-win relationships: employee , customer, company and all succeed Growing fast and aiming to dominate Southern New England mobile hydraulic hose market What You'll Do Drive a fully-equipped service van to repair and replace broken hoses on-site Diagnose issues, solve problems, and fabricate hoses to get equipment running again Manage your tools and vehicle Join a rotating on-call schedule (with incentive pay) What We're Looking For Mechanical aptitude (cars, bikes, boats - it all counts) Strong problem-solving skills Good communication and reliability Comfortable working independently most days - unless it's a big job, you'll run service calls solo and only see the crew at weekly meetings and when you restock. Valid driver's license Ability to pass background & drug checks Experience not required - we'll train you and back you up with 24/7 support. Sound like the kind of crew you'd want to roll with? Apply today - we're excited to meet you. Compensation: $23.00 - $30.00 per hour Be part of one of the fastest-growing franchises in the U.S. while keeping America's essential industries operating. PIRTEK is committed to providing world-class service while helping others in the organization succeed. We embrace change and innovation, and strive to be giving participants in the communities we serve. Above all, PIRTEK values integrity as we hold ourselves fully and personally accountable in all our dealings. We provide our customers with the fastest hydraulic and industrial hose maintenance and replacement services through on-site mobile and retail PIRTEK Service & Supply centers throughout the United States. Whether you're just starting or looking to advance your career, you'll find a supportive culture with teams characterized by honesty and integrity. As a Mobile Sales and Service Technician, you will be helping a small business owner grow their local business and enjoy a career where no two days are the same. You will also be provided a company vehicle to use while commuting to and from work. PIRTEK franchises are locally owned and operated by people interested in your success. Many Mobile Sales and Service Technicians go on to become Operation Managers, Business Managers, and even Franchise Owners themselves. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to PIRTEK Corporate.

General information Country United States State New Hampshire City Nashua Job ID 47761 Department Customer Support Experience Level ASSOCIATE Employment Status FULL_TIME Workplace Type On-site Description & Requirements An Electro‑Mechanical Assembler is responsible for building, testing, and troubleshooting assemblies that combine mechanical components with electrical wiring, circuits, and hardware. This role supports production, engineering, and quality teams to ensure products are built accurately, safely, and on schedule. A Day in Life Typically Includes: * Assemble electro‑mechanical components, sub‑assemblies, and full systems using schematics, wiring diagrams, blueprints, and work instructions. * Perform wiring, soldering, crimping, routing, and mechanical fastening. * Operate hand tools, power tools, torque tools, and basic test equipment. * Inspect parts and assemblies for accuracy, quality, and proper fit. * Conduct functional tests and record results according to procedures. * Identify and troubleshoot assembly issues; escalate complex problems to engineering. * Maintain a clean, organized, and safe work area. * Follow all safety, ESD, and quality control procedures. Basic Qualifications: * Experience with electro‑mechanical assembly in a manufacturing or production environment. * Experience reading and interpreting technical drawings, schematics, and wiring diagrams. * Experience working with hand tools, soldering equipment, and measurement devices with small components. * Experience working with codes and quality standards. * Experience working in a role involving electrical principles (voltage, continuity, polarity). * English reading and writing communication skills. Preferred Qualifications: * IPC‑A‑610 or J‑STD‑001 certification. * Experience with cable harness assembly. * Experience with lean manufacturing or 5S practices. * High school diploma or equivalent; technical training. About Infor Infor is where ambition meets impact. Join a global community of bold thinkers and innovators, where your expertise doesn't just solve problems. it shapes industries, unlocks opportunities, and creates real-world impact for billions of people. At Infor, you're not just building a career. you're helping to build what's next. Infor is a global leader in business cloud software products for companies in industry specific markets. Infor builds complete industry suites in the cloud and efficiently deploys technology that puts the user experience first, leverages data science, and integrates easily into existing systems. Over 60,000 organizations worldwide rely on Infor to help overcome market disruptions and achieve business-wide digital transformation. For more information visit ************* Our Values At Infor, we strive for an environment that is founded on a business philosophy called Principle Based Management (PBM) and eight Guiding Principles: integrity, stewardship & compliance, transformation, principled entrepreneurship, knowledge, humility, respect, self-actualization. We have a relentless commitment to a culture based on PBM. Informed by the principles that allow a free and open society to flourish, PBM prepares individuals to innovate, improve, and transform while fostering a healthy, growing organization that creates long-term value for its clients and supporters and fulfillment for its employees. Infor is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive work environment. Infor does not discriminate against candidates or employees because of their sex, race, gender identity, disability, age, sexual orientation, religion, national origin, veteran status, or any other protected status under the law. If you require accommodation or assistance at any time during the application or selection processes, please submit a request by following the directions located in the FAQ section. Fraud Awareness We have been made aware of unauthorized individuals posing as Infor recruiters, including some who have made fraudulent offers of employment. Please read our guidelines and protect yourself from recruitment scams. Fraud Privacy Policy We value your privacy at Infor. You may access our privacy policy here. This employer uses E-Verify. Please visit this website for additional information. E-Verify Illinois: Click here, aquí, or tu.

ABOUT US:Volta Labs is an applications company that is revolutionizing the future of genomics. We are a Boston based, venture-backed biotech startup that makes extracting vital information from biological samples is as simple as pressing a button, through our flagship product Callisto. Our product speeds up processing time for scientists and increases accessibility to important genetic information for patients. Sitting at the intersection of science and engineering, we invite you to join us on our journey to shape the future of genomics, where insatiable curiosity is encouraged and every Voltarian makes an impact. THE TEAM:You'll join a team of innovative thinkers who love to experiment, collaborate, and win together. We are passionate about pushing the boundaries of automation, biology, computing, robotics, design, and user experience to benefit our customers and the world. The Role:We're a startup delivering our Instrument and platform to early-adopting customers this year. We're choosing to manufacture in-house instead of contracting it out overseas to ensure quality and allow us to keep experimenting. The Manufacturing Assembly Technician is a key member of the Manufacturing team, and will be literally assembling, calibrating, and testing our Instrument from top to bottom. It's a fairly repetitive role, and for someone who likes the challenge of piecing together a big puzzle every day that involves moderately difficult electromechanical systems, combined with the knowledge that your hands are building the tech of the future, it will be a great fit. This role requires attendance during normal working hours between 9-5, 5 days a week in the Boston Seaport area.Day to Day and Year 1 Building the Instrument, Testing, Calibrating, and performing Quality checks Packaging and shipping the machine to customer labs Add support building the consumables (simpler assembly, but more dextrous work) during downtime Within 3 months you'll… Complete onboarding, understand the product Be able to competently build, calibrate, and test with little to no oversight By 6 months you'll… Have built and shipped an Instrument to a customer, and be participating in logistics improvement cycles. You will be authoring new and updating existing SOPs. You will also begin to be knowledgeable enough to facilitate debugging and testing machines in use at customer sites or within our internal development lab. At 12+ months you'll… Actively support the growth of the Manufacturing team. Start stepping into a larger role as you mentor the junior technicians. Contribute to continuous process improvements Qualifications High School Diploma or GED required. Associates Degree or other 2-year technical diploma preferred OR 5+ years of military training and experience testing, and troubleshooting of large military platforms to be considered in lieu of technical diploma. 1-2+ years experience in a manufacturing environment that involves assembling products with any combination of electronics, robotics, or mechanical components Physical Requirement: Must be able to lift up to 50 pounds, work while standing for extended periods and be comfortable bending, leaning, reaching, and working in and around machinery as part of daily job duties. Experience debugging and repairing electrical components using soldering irons and multimeters. Must be proficient with electrical reworks such as cable repairs, and surface mount and through hole PCB reworks. Must use and understand the application of common hand tools, various industry nomenclatures, and have strong assembly skills. Must be a self-starter who looks for ways to improve the job and related processes and shows initiative in execution. Working knowledge of spreadsheets, creating, manipulating, and using for data analysis. Demonstrated proficiency developing work instructions, documenting testing procedures and processes. Ability to Self-manage your day-to-day areas with minimal supervision, while completing tasks with high quality output and timely delivery Familiarity with ERP and PLM software is a nice-to-have that supports future projects this role will own. $28 - $33 an hour This range reflects the target compensation for this role across our U.S. locations. Actual pay will depend on experience, education, and skill level. We regularly review our pay practices to ensure equity and fairness. This is a full-time position that requires a significant amount of in-person work and collaboration onsite at our Seaport Office in Boston, MA. If you are unable to relocate or commute to the Boston MA area, this role won't be a match. Our Benefits and Perks: • Robust Equity Program, to build future wealth through stock options with high growth potential• Comprehensive Healthcare Coverage, including Medical, Dental, & Vision• HSA with monthly company contribution, & FSA• Sponsored Commuter Benefit Plans• Access to Our 401K Plan, to save for your future• 12 Weeks of Paid Parental Leave• Paid Time Off, because we understand the importance of time off for rest and adventure• 11 Paid Holidays• Twice Weekly Company Lunches, office snacks, beverages, & treats• Monthly Team Happy Hours and regular team outings! We are an equal opportunity employer and foster diversity and inclusion at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status, and we actively seek out and value diverse backgrounds and experiences. Even if you don't check every box, but see yourself positively contributing, please apply. Help us build an inclusive community that will change the face of genomics!We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

**Be visionary** Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. **Job Description** **Job Summary:** Assemble opto-mechanical systems in accordance to manufacturing documentation (assembly instructions, process documents, etc.) using a variety of hand tools, measuring devices and test equipment. **Primary Duties & Responsibilities:** + Build opto-mechanical assemblies by using assembly drawings and assembly procedures + Work with assembly and inspection tools such as torque wrenches, micrometers, calipers, height gages, and dial indicators + Support of optical alignment and testing of optical systems + Document actions by completing checklists + Maintain safe and clean work environment by complying with procedures, rules, and regulations + Generate work order material kits using printed bills of material (BOM) + General lab maintenance as necessary **Job Qualifications:** + Applicants must be either a U.S. citizen, U.S. national, legal permanent resident, asylee, refugee or must be eligible to apply for and obtain the appropriate export control license from the U.S. Departments of State or Commerce. + Minimum of 3 years of assembly experience required + Ability to read complex assembly drawings and process instructions + Independent worker, requiring little to no supervision + Ability to troubleshoot mechanical issues + Experience using standard hand tools - Allen wrenches, screw drivers, torque wrenches, etc. + Familiarity with computers as applicable to manufacturing + Possess a solid, quality minded work ethic and strong attention to detail + Interface in a collaborative manner to foster effective and inspiring group dynamics + Ability to sit/stand for extended periods, often for most of the workday + Ability to lift, push, pull, or carry objects, often up to 50 pounds, though the frequency of lifting heavier objects varies **_Applicants must be either a U.S. citizen, U.S. national, legal permanent resident, asylee, refugee or must be eligible to apply for and obtain the appropriate export control license from the U.S. Departments of State or Commerce._** **Salary Range:** $42,800.00-$57,100.000 **Pay Transparency** The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, education/training, work experience, key skills, and type of position. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws. You may not realize it, but Teledyne enables many of the products and services you use every day **.** Teledyne provides enabling technologies to sense, transmit and analyze information for industrial growth markets, including aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, energy, medical imaging and pharmaceutical research.

We are seeking a skilled Assembler to perform soldering, assembly, and related tasks for the manufacture of high-reliability frequency control and RF electronics products used in space, military, and commercial applications. Key Responsibilities: •Perform hand soldering of fine pitch surface mount and through-hole components •Assemble wire harnesses and cable assemblies using measurement tools and schematics •Conduct rework and repairs to existing assemblies •Follow work instructions and quality standards (J-STD-001 Class 3 / IPC-610 Class 3) •Inspect work using microscopes and ensure high workmanship standards •Maintain organized workflow across multiple projects •Collaborate on documentation and process improvements Requirements: •Proven experience soldering miniature SMT components •Proficient with J-STD-001 or IPC-610 Class 3 standards •Skilled in reading schematics and using measurement tools •Ability to perform precise work under magnification •Strong verbal and written communication skills •Reliable, detail-oriented, and able to work with minimal supervision Preferred Skills: •Familiarity with identifying electronic components •Experience using basic test equipment •Basic computer skills

Top Gun Staffing Group is excited to partner with a global leader in advanced technology solutions to recruit a Cable Assembly Technician on a permanent, direct‑hire basis. We're looking for individuals who thrive on making an impact and want the excitement of being part of a team that wins. The Role As a Cable Assembly Technician, you'll be hands‑on in building intricate wiring systems that support cutting‑edge technologies. This role demands precision, problem‑solving, and craftsmanship-perfect for someone who takes pride in their work and wants to contribute to industries shaping the future. Essential Duties & Responsibilities Plan, lay out, and perform intricate wiring on cables, connectors, electrical penetrators, junction boxes, and related equipment. Read and interpret schematic wiring diagrams, process sheets, and blueprints. Use electrical instruments to make polarity determinations. Assemble components accurately from detailed written or verbal instructions. Communicate effectively by listening, clarifying, documenting, and writing clearly. Education & Experience High school diploma or equivalent. 2-4 years of cable assembly experience. Ability to apply common sense and follow instructions. Strong skills in reading technical documents and applying basic math. Physical Demands Good hand coordination and flexibility. Ability to move and occasionally lift up to 50 lbs. or more. Good vision, including passing a color blindness test. Hours | Pay Range Monday - Friday, 8:00AM - 4:30PM $23.50 - $26.50/hour commensurate with experience

MACOM designs and manufactures semiconductor products for Data Center, Telecommunication and Industrial and Defense applications. Headquartered in Lowell, Massachusetts, MACOM has design centers and sales offices throughout North America, Europe and Asia. MACOM is certified to the ISO9001 international quality standard and ISO14001 environmental management standard. MACOM has more than 75 years of application expertise with multiple design centers, Si, GaAs and InP fabrication, manufacturing, assembly and test, and operational facilities throughout North America, Europe, and Asia. Click here to view our facilities. In addition, MACOM offers foundry services that represent a key core competency within our business. MACOM sells and distributes products globally via a sales channel comprised of a direct field sales force, authorized sales representatives and leading industry distributors. Our sales team is trained across all of our products to give our customers insights into our entire portfolio. Position Overview: An Assembler 3 at MACOM is responsible for assembling micro-electronic components and precision electromechanical parts according to product specifications for the RF and microwave industry. This role requires ability to interpret blueprints, assembly drawings and diagrams, and supporting production processes to ensure efficient machine operation and achievement of production targets. The ideal candidate will have hands-on experience with hand soldering, manual die attach, manual substrate attach, and manual wire bonding. Experienced working under a microscope. Key Responsibilities: * Assemble and repair precision electromechanical parts, assemblies, and equipment. * Perform hand soldering, manual die attach, substrate attach, and wire bonding operations with high precision. * Experienced at using soldering irons, manual die attach and manual ball/wedge bonders. * Align, fit, and assemble component parts into completed units using hand tools, power tools, fixtures, and templates. Verify dimensions and clearances of parts to ensure conformance to blueprint specifications using instruments such as microscopes, micrometers, calipers, and height gauges. * Examine parts for defects, perform repairs and rework, and calibrate assemblies to meet operational tolerances. * Prepare work by studying assembly instructions, blueprint specifications, and parts lists; gather parts, subassemblies, tools, and materials. * Position parts and subassemblies using templates or by reading measurements. * Maintain a safe and clean work environment by complying with procedures, rules, and regulations. Key Competencies & Skills Required: * Proficiency in manual die attach, substrate attach, and wire bonding techniques. * Experience in hand soldering and manually placing small components onto electrical assemblies. * Ability to follow travelers, standard operating procedures, and interpret assembly drawings. * Skilled in using microscopes for inspection to ensure the highest quality standards. * Ability to solve standard problems using existing procedures and experience; analyze information and apply standard assembly practices. Required Qualifications and Experience: * High School degree or equivalent. May be currently taking or just completed vocational level training in a related field. * 5 years of related work experience. * MIL-STD-750, MIL-STD-883, MIL-STD-38534 * ANSI/ESD S20.20 protocols * IPC-610 and J-STD 1 a plus * Due to ITAR regulations, only candidates who are U.S. Persons (U.S. citizens, U.S. nationals, lawful permanent residents, or individuals granted asylum or refugee status) will be considered for this position. Physical Requirements: This role requires the ability to sit and perform detailed work under a microscope for extended periods of time (8-hour shift, excluding scheduled breaks). This position may also involve standing, walking, and traveling to other areas within the facility to conduct inspections or support related tasks. EEO: MACOM is an Equal Opportunity Employer committed to a diverse workforce. MACOM will not discriminate against any worker or job applicant on the basis of race, color, religion, sex, gender identity, sexual orientation, national origin, age, disability, genetic information, veteran status, military service, marital status, or any other category protected under applicable law. Reasonable Accommodation: MACOM is committed to working with and providing reasonable accommodations to qualified individuals with physical and mental disabilities. If you have a disability and are in need of a reasonable accommodation with respect to any part of the application process please call *************** or email HR_*************. Provide your name, phone number and the position title and location in which you are interested, and nature of accommodation needed, and we will get back to you. We also work with current employees who request or need reasonable accommodation in order to perform the essential functions of their jobs.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance: None/Not Required At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon is seeking an Optical Assembly & Potting Tech II, in support of the Global ISR Sensors and Software business. Tests and inspects optical components and systems using a variety of electro-optical, metrology, and inspection tools and software. This person will liaise with other departments where appropriate to ensure the Optical Assembly meets the required demands. This position will be located ONSITE at our Westford, MA facility. What You Will Do Tests and inspects optical components and systems using a variety of electro-optical, metrology, and inspection tools and software. Performs intricate/complex assembly and potting of optical components within specified tolerances. Interprets blueprints, work orders, engineering plans, specifications, reference planes, designs sketches and geometric dimensions and tolerances (GD&T) for operation, material, and dimensional requirements Pulls kits from holding rack in production order Performs various optical potting operations such as coating elements, stacking/assembly of optics, alignments, grinding, cleaning, or applying adhesives Uses machine and hand tools to perform operations Sets up and monitor chambers Conducts various quality inspections such as pressure testing or pull testing to ensure compliance with specifications Qualifications You Must Have Typically requires HS diploma (or equivalent, e.g. G.E.D. in the US) or vocational/technical education in related discipline with minimum of 1 year of relevant experience Due to programs and projects this position supports, U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance SAP experience Experience working with Electro-Optical assemblies used in surveillance and reconnaissance systems Qualifications We Prefer Optics/mechanical/electro-optical experience. Clean room experience. Good dexterity skills required due to delicate handling of precision optical components. Follow oral and written instructions and have overall good communication skills. Familiar with Excel, Word, Access and PowerPoint. Must be able to work independently within a team environment Shift flexibility is critical Team-oriented - actively participates and steps in for other commodities as needed. What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. Not Relocation Eligible - Relocation assistance not available Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

**Country:** United States of America ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Security Clearance:** None/Not Required At **Raytheon** , the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. **Raytheon** is seeking an Optical Assembly & Potting Tech III, in support of the Global ISR Sensors and Software business. Tests and inspects optical components and systems using a variety of electro-optical, metrology, and inspection tools and software. This person will liaise with other departments where appropriate to ensure the Optical Assembly meets the required demands. This position will be located **ONSITE at our Westford, MA** facility. **What You Will Do** + Tests and inspects optical components and systems using a variety of electro-optical, metrology, and inspection tools and software. + Performs intricate/complex assembly and potting of optical components within specified tolerances. + Interprets blueprints, work orders, engineering plans, specifications, reference planes, designs sketches and geometric dimensions and tolerances (GD&T) for operation, material, and dimensional requirements + Pulls kits from holding rack in production order + Performs various optical potting operations such as coating elements, stacking/assembly of optics, alignments, grinding, cleaning, or applying adhesives + Uses machine and hand tools to perform operations + Sets up and monitor chambers + Conducts various quality inspections such as pressure testing or pull testing to ensure compliance with specifications **Qualifications You Must Have** + Typically requires HS diploma (or equivalent, e.g. G.E.D in the US) or vocational/technical education in related discipline with a minimum of 2 years of relevant experience. + Due to programs and projects this position supports, U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance + SAP experience + Experience working with Electro-Optical assemblies used in surveillance and reconnaissance systems **Qualifications We Prefer** + Optics/mechanical/electro-optical experience. + Clean room experience. + Good dexterity skills required due to delicate handling of precision optical components. + Follow oral and written instructions and have overall good communication skills. + Familiar with Excel, Word, Access and PowerPoint. + Must be able to work independently within a team environment + Shift flexibility is critical + Team-oriented - actively participates and steps in for other commodities as needed. **What We Offer** Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At **RTX** we value: Trust, Respect, Accountability, Collaboration, and Innovation. **Not Relocation Eligible - Relocation assistance not available** **Learn More & Apply Now!** Please consider the following role type definition as you apply for this role. **Onsite:** Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Our nation's elections are being challenged like never before. As the first newcomer in the industry in the last 30 years, Clear Ballot rises to the challenge with a simple goal: Let's create technology that empowers our customers to improve democracy. Elections are the cornerstone of our democracy, with the right to vote being one of our greatest freedoms. Great elections require secure and reliable tabulation equipment, full transparency of the process in which ballots are created and cast, and the ability to audit the results. Our mission is to surpass those expectations in a way that will raise the bar for the entire election technology industry. Clear Ballot is hiring assembly technicians to join our team. This position is hourly with a Monday - Friday schedule. This is a temporary position expected to run from October to the end of January. Key Responsibilities: Assembly: Following instructions assembling devices. Includes subassemblies, connecting cables, wire routing, calibration, system diagnostics, testing repairs, positioning, aligning, adjustment, and fastening various components. Testing and Troubleshooting: Diagnostic testing to ensure all components are working correctly and troubleshooting any issues that arise during assembly and testing. Quality Control: Performing quality checks to ensure the assembled systems meet the required standards and specifications Software Installation: Installing specific software necessary for the system to function properly. Setting BIOS, and firmware updates. Following Procedures: Adhering to established procedures, safety guidelines, and quality control protocols. This involves utilizing visual models for assembling fully functioning voting machines with subassemblies into prefabricated enclosures Inventory Management: Required to use inventory tracking systems and protocols Collaboration: Ability to collaborate and communicate effectively with teams and others, both verbally and in writing, to optimize assembly processes and enhance product quality through strong teamwork and clear communication. Documentation and Reporting: Maintaining detailed records of assembly activities, component inventory work orders, and any issues encountered during installation or repairs. Skills and Qualifications: Knowledge of computer hardware components and their functions Familiarity with simple hand tools and computers Ability to follow intermediate to complex instructions precisely, and maintain a high standard of quality Ability to understand and follow inventory tracking protocols Adherence to quality standards Experience with command prompt is a plus Ability to lift and carry up to 35 pounds across short distances Attention to detail is essential for ensuring proper assembly and functionality Problem-Solving: ability to troubleshoot and resolve assembly and performance issues Physical Stamina: This role may require standing for extended periods of time and handling components. This role requires working in various onsite environments which may include manufacturing sites and warehouses Teamwork: ability to work effectively as part of a team as well as individually Clear Ballot Group, Inc. is an Equal Opportunity Employer. We believe everyone deserves to work in a welcoming, respectful and considerate environment. We live by our values and hire accordingly. Our talented team and driven investors share a passion for solving problems and restoring confidence in America's democratic process. We are looking for energetic professionals to join us in this mission.

Job Description Our nation's elections are being challenged like never before. As the first newcomer in the industry in the last 30 years, Clear Ballot rises to the challenge with a simple goal: Let's create technology that empowers our customers to improve democracy. Elections are the cornerstone of our democracy, with the right to vote being one of our greatest freedoms. Great elections require secure and reliable tabulation equipment, full transparency of the process in which ballots are created and cast, and the ability to audit the results. Our mission is to surpass those expectations in a way that will raise the bar for the entire election technology industry. Clear Ballot is hiring assembly technicians to join our team. This position is hourly with a Monday - Friday schedule. This is a temporary position expected to run from October to the end of January. Key Responsibilities: Assembly: Following instructions assembling devices. Includes subassemblies, connecting cables, wire routing, calibration, system diagnostics, testing repairs, positioning, aligning, adjustment, and fastening various components. Testing and Troubleshooting: Diagnostic testing to ensure all components are working correctly and troubleshooting any issues that arise during assembly and testing. Quality Control: Performing quality checks to ensure the assembled systems meet the required standards and specifications Software Installation: Installing specific software necessary for the system to function properly. Setting BIOS, and firmware updates. Following Procedures: Adhering to established procedures, safety guidelines, and quality control protocols. This involves utilizing visual models for assembling fully functioning voting machines with subassemblies into prefabricated enclosures Inventory Management: Required to use inventory tracking systems and protocols Collaboration: Ability to collaborate and communicate effectively with teams and others, both verbally and in writing, to optimize assembly processes and enhance product quality through strong teamwork and clear communication. Documentation and Reporting: Maintaining detailed records of assembly activities, component inventory work orders, and any issues encountered during installation or repairs. Skills and Qualifications: Knowledge of computer hardware components and their functions Familiarity with simple hand tools and computers Ability to follow intermediate to complex instructions precisely, and maintain a high standard of quality Ability to understand and follow inventory tracking protocols Adherence to quality standards Experience with command prompt is a plus Ability to lift and carry up to 35 pounds across short distances Attention to detail is essential for ensuring proper assembly and functionality Problem-Solving: ability to troubleshoot and resolve assembly and performance issues Physical Stamina: This role may require standing for extended periods of time and handling components. This role requires working in various onsite environments which may include manufacturing sites and warehouses Teamwork: ability to work effectively as part of a team as well as individually Clear Ballot Group, Inc. is an Equal Opportunity Employer. We believe everyone deserves to work in a welcoming, respectful and considerate environment. We live by our values and hire accordingly. Our talented team and driven investors share a passion for solving problems and restoring confidence in America's democratic process. We are looking for energetic professionals to join us in this mission.

Job Description Mechanical assembly of extrusion frames. Minimal electro-mechanical assembly using proper grounding techniques. Following work instructions, perform repetitive assembly operations. Produce quality work to specified time standards. Execute in-process checks using visual inspection and check lists. Possess an aptitude for cross functional training to reduce takt time. Utilize a variety of hand tools such as screw drivers, hex keys, drills, saws, tape measures and fixtures. Coordinating with teammates participate in manually integrating large subassemblies to complete a final assembly. Willingness to work overtime as needed. EDUCATION AND EXPERIENCE High School Education or GED Some manufacturing experienced desired Basic print reading and experience in wire dressing and termination Proficient in reading and measuring using a tape measure Operate hand pallet jacks to move material within plant Able to lift, squat, bend, reach, and stand as work requires. PHYSICAL DEMANDS Work involves frequent lifting of materials and product up to 30 pounds. Frequent use of hand tools. Long periods of standing. WORKING CONDITIONS Working conditions are normal for a manufacturing environment. Safety equipment to include but not limited to, eye safety glasses and safety shoes. Loose fitting clothes and jewelry are not permitted. Pay Range (Massachusetts): $19.12 - $23.37 per hour. This range reflects the expected base pay for this position in Massachusetts and is based on internal equity and the established job family compensation structure. Actual compensation may vary based on experience, qualifications, and performance.

Description: This position is responsible for the assembly of heat exchanger and related units and subassemblies. Assembles fabricated parts at their respective floor stations using bills of material, drawings, engineering specifications, and quality control documents. Responsible for completing assemblies to meet tolerances and product specifications. May be responsible for identifying and repairing non-conforming or out of tolerance components. Working Conditions: This job operates in a manufacturing environment. This role may also routinely use standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Physical Requirements: · Ability to lift up to 50 pounds, anything over 50 pounds must use approved apparatus or another person to assist. · Must be able to bend, sit, and stand for extended periods of time. · Ability to push/pull product on carts, racks, pallets, and shelves. · Ability to work with temperature fluctuations within the plant dependent on the season. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand, walk, use hands to handle or feel, and reach with hands and arms. The employee is also required to wear appropriate Personal Protective Equipment (PPE) based on the task being performed. PPE includes, but is not limited to, safety glasses, ear protection, cut resistant gloves and sleeves, hard hat, Tyvek suit, and steel-toed shoes. Job description statements are intended to describe the general nature and level of work being performed by employees assigned to this job title. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required. Heat Recovery Innovations is an equal opportunity employer inclusive of female, minority, disability, and veterans, (M/F/D/V). Hiring, promotion, transfer, compensation, benefits, discipline, termination, and all other employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, age, disability, national origin, citizenship/immigration status, veteran status, or any other protected status. About Heat Recovery Innovations (HRI): HRI (******************************** is an energy transition enabler, collaborating with innovative companies and technologies. We collaborate with customers of all sizes to develop the next generation of heat recovery technologies to improve fuel efficiency for power generation, transportation, and industrial applications. HRI's proven team has deep industry experience in designing, engineering, and producing high temperature heat exchangers. Benefits Competitive salary 15 days of paid time off (PTO) with accrual beginning day one Paid Holidays Floating Holidays Annual allowance for work-related wear Health insurance (80% employer-paid) Dental (100% employer-paid option available) Vision (100% employer-paid) Short term and long-term Disability (100% employer-paid) Life insurance Long term care offerings 401(k) plan with up to a 6% company match Requirements: Duties & Responsibilities · Must be capable of performing all non-specialized and some specialized mechanical assembly operations of sub-assemblies and package assembly including associated in-process quality checks and tests, plus finishing work and final packaging. · Must have the ability to read and interpret engineering drawings, specifications, assembly instructions, bills of material, and quality control documents. Takes responsibility for quality and work content performed in the applicable operation by signing off on the appropriate documentation prior to indexing to the next step in the process. · Must exhibit/demonstrate the ability to use correct tooling, fixturing, and equipment to perform work tasks to engineering specifications. Must ensure that all tools used in performing job duties are within calibration, as stated on calibration sticker. Where discrepancies arise, immediate notification of a supervisor occurs. · Must be able to function in a flexible team environment. Must be willing and capable of flexing into other assembly jobs as required. · Assists engineers with tasks related to development, construction, and evaluation of prototypes, new products, operations, and/or procedures. · Maintains production logs, inventories, documentation, outlining procedures, batch records, inventory, productivity, changeover, and progress. · Ensures compliance with health and safety laws, regulations, and best practices. · Requires a high degree of responsibility for safety to self, to others, for equipment, and materials. Must maintain a clean, orderly, and safe work area and follow all safety rules and procedures. Identify safety concerns and drive for successful resolution. · Support other areas of the facility including material handling, receiving, shipping, production and development testing. · Performs all work in accordance with established safety protocols. · Must be willing to work to get the job done under overtime hours inclusive of Saturdays and Sundays. · Capable of operating basic material handling equipment. · Valid fork truck certification a plus. · Performs other duties as assigned. Competencies · Excellent verbal and written communication skills, with proven ability to clearly communicate with engineering, technical support, sales, and management. · Basic understanding of products and equipment used in manufacturing. · Solid organizational skills and attention to detail. · Strong time management skills, with proven ability to meet deadlines. · Strong analytical and critical thinking skills. · Proficient with Microsoft Office Suite or related software.

Job Title: Manufacturing Technician - Cleanroom (Temp to Perm) Location: Manchester, NHSchedule: for 2nd shift only 9/80 Schedule (every other Friday off) OPENINGS AVAILABLE 2nd Shift Manufacturing Technician - Cleanroom (6 openings) 3rd Shift Manufacturing Technician - Cleanroom (10 openings) SHIFT DETAILS 2nd Shift: 3:00 PM - 12:15 AM 3rd Shift: Sunday-Thursday, 11:00 PM - 7:00 AM POSITION OVERVIEWWe are seeking reliable, detail-oriented Manufacturing Technicians to support cleanroom production operations on 2nd and 3rd shift. This role is ideal for self-sufficient technicians with hands-on experience in assembly, testing, and documentation of mechanical and electrical assemblies. You will play a key role in assembling medical devices while ensuring quality, compliance, and efficiency in a regulated manufacturing environment.KEY RESPONSIBILITIES Assemble plastic and metal components into medical devices per approved manufacturing procedures Operate small hand tools (manual and electric), presses, assembly fixtures, calibrated instruments, microscopes, and test fixtures Follow Bills of Materials, work orders, check sheets, flow charts, and assembly drawings to build product and record results Perform soldering, crimping, ultrasonic welding, bonding, gluing, and other assembly techniques Conduct kitting using scanners and inventory software as required Complete startup and end-of-day equipment inspections and verifications Inspect assemblies throughout the process and report quality or operational issues Maintain a clean, organized, and safe work area; actively participate in safety programs Support continuous improvement and 5S initiatives as part of cross-functional teams Work closely with Engineers and line leads to resolve issues and update procedures Ensure compliance with ISO, QSR, FDA regulations, and company manufacturing policies Maintain accurate documentation for quality checks, WIP, test results, and labor reporting QUALIFICATIONS Minimum 2 years of hands-on experience in a manufacturing environment Experience with assembly, testing, and documentation of mechanical and/or electrical devices Strong attention to detail and ability to follow written procedures Strong verbal, written, and interpersonal communication skills Ability to adapt to a fast-paced, regulated environment and manage multiple tasks Preferred: Medical device manufacturing experience Familiarity with ISO, QSR, FDA regulations, Lean manufacturing, GMP, or cleanroom environments WORK ENVIRONMENTFast-paced, regulated cleanroom medical device manufacturing environment requiring strict adherence to procedures, documentation, and safety standards.ABOUT USTop Prospect Group, founded in 2010, is a technical staffing firm committed to matching top professionals with industry-leading clients. In 2023, we joined HW Staffing Solutions, expanding our reach across manufacturing, logistics, and technology sectors nationwide.INTERESTED CANDIDATES - APPLY TODAYPlease submit: A clean copy of your resume Desired hourly rate Availability and at least one professional reference #INDTPGSHELTON

Schedule: M-Th 5am - 3:30pm Starting at $20.00ph Assemble or fit together parts that form a complete unit or sub-assembly using hand or power tools or special equipment. At Terex / CBI we believe in fostering a vibrant and inclusive work culture where every person is empowered to thrive. We're dedicated to driving quality, innovation, embracing diversity, and creating an environment where everyone feels valued and respected. We're committed to excellence in everything we do, and we're seeking talented individuals who share our passion and values to join our team. As an Assembler at Terex/CBI, based in Newton, NH, you'll play a pivotal role. Below is a brief description of responsibilities. Duties and Responsibilities: Construct and assemble sub-assemblies and assemble components including shafts, pulleys, bearings, gearboxes & conveyor components. Fitting and assembly operations. Repair / refit of products as required. Ability to work independently Read blueprints and bills of materials Setting all critical bearing clearances and shaft locations without supervision Other duties as assigned. Required Skills and Experience High school graduate 0 - 2 years mechanical experience (2-4 preferred) Knowledge of electrical/hydraulic assembly preferred Basic mathematical skills Understand parts preparation Read blueprints Have own tools; Use hand tools such as drills, grinders, sockets, wrenches, etc. Company provides larger tools Strong verbal and written communication skills Strong interpersonal and customer service skills Strong organizational skills and attention to detail Excellent time management skills with a proven ability to meet deadlines Proficient with Microsoft Office Suite or related software • We are a global company, and our culture is defined by our Values - Integrity, Respect, Improvement, Servant Leadership, Courage, and Citizenship. Check out this video! The Terex purpose • Safety is an absolute way of life. We expect all team members to prioritize safety and commit to Zero Harm. • Our top priority is creating an inclusive environment where every team member feels safe, supported, and valued. • We make a positive impact by providing innovative solutions, engaging our people, and operating in a sustainable way. • We are committed to helping team members reach their full potential. • Through innovation and collaboration, our vision remains forward-looking, and we aim to be a catalyst for change, inspiring others to build a better world for generations. • We offer competitive salaries, healthcare, holidays, , life insurance, LinkedIn Learning, • For more information on why Terex is a great place to work click on the link! Careers | Terex Corporate This above description is non-exhaustive and there may be additional duties in accordance with the role. If you are interested in an open position but feel you may not meet all the listed qualifications, we still encourage you to apply. How to Apply To apply for this role and view all available positions within Terex, please visit our careers page: ********************* Terex is an equal opportunity employer and appointments are based on merit. We value diversity and welcome applications from all sections of our community. If you are interested in an open position but feel you may not meet all the listed qualifications, we still encourage you to apply. About Terex: Terex Corporation is a global industrial equipment manufacturer of materials processing machinery, waste and recycling solutions, mobile elevating work platforms (MEWPs), and equipment for the electric utility industry. We design, build, and support products used in maintenance, manufacturing, energy, minerals and materials management, construction, waste and recycling, and the entertainment industry. We provide best-in-class lifecycle support to our customers through our global parts and services organization, and offer complementary digital solutions, designed to help our customers maximize their return on their investment. Certain Terex products and solutions enable customers to reduce their impact on the environment including electric and hybrid offerings that deliver quiet and emission-free performance, products that support renewable energy, and products that aid in the recovery of useful materials from various types of waste. Our products are manufactured in North America, Europe, and Asia Pacific and sold worldwide. Additional Information: We are passionate about producing equipment that helps improve the lives of people around the world and providing our team members with a rewarding career and the opportunity to make an impact. We are committed to recruiting, engaging, developing, and retaining team members at all levels of our global workforce. Our culture is defined by our Terex Way Values - Integrity, Respect, Improvement, Servant Leadership, Courage, and Citizenship. Our values are the driving force behind our commitment to maintain an inclusive, supportive, non-discriminatory, and safe workplace for all team members. To that end, we are committed to actively foster a culture where every team member feels valued, listened to, and appreciated. We are committed to being fair and impartial in our decisions. As an Equal Opportunity Employer, employment decisions are made without regard to race, color, religion, national origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. If you are a qualified individual with a disability, including disabled veterans, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site as a result of your disability. You can request reasonable accommodations by contacting the recruiting department (person or department) at ********************************** . The Company offers competitive salaries, advancement opportunities, and a full range of benefits, including paid vacation, 401(k), medical, dental, and vision.

MBRAUN Incorporated located in Stratham, New Hampshire is a leading manufacturer of high-end technology solutions. Products include gloveboxes, inert gas purification, thin-film technology, isolators, solvent purification and custom system solutions for clean environments. MBRAUN is instrumental in developing world class core technologies and then adapting them to an application, yielding the most efficient clean environments based on our intimate knowledge of the many markets we serve. For over 40 years MBRAUN employees share in the vision of creating a world-class company that can be our customers #1 creative partner. We have and we can engineer solutions customers need using a unique solutions approach in which we collaborate to define specific application requirements. Together with the customer, we determine the best solution package from MBRAUN's range of products and services. For more information please visit *************** Job Description M. Braun, Inc. is currently seeking a full-time Production Assembly Technician to join our Production Department. This person will be responsible for the assembly of all standard and custom gloveboxes and purifiers. This individual should be highly motivated with the ability to prioritize and work well with others as well as independently once trained. Job functions include, but are not limited to: Equipment assembly Glovebox leak testing and operational testing All processes and tests involved in building a glovebox from beginning to end Assembly of gas and electrical feedthroughs General electrical assembly Job Requirements The ideal candidate should be detail-oriented and possess excellent communication and organizational skills. This person should be able to stay focused and have the ability to apply common sense understanding to carry out detailed written and oral instructions. This individual should possess 2 or more years of hands-on manufacturing experience. Job requirements include, but are not limited to: Ability to read and interpret drawings Ability to use hand and power tools (experience preferred) Ability to lift 50lbs on a regular basis Experience with small diameter stainless steel pipe bending (preferred but not required) Experience with basic wiring, basic TIG welding (preferred but not required) Compliance with ISO 9001 standards and procedures Education Requirements High School Diploma Physical and Mental Requirements Physical Requirement: Balancing; climbing; bending; stooping; crawling; some light, moderate, heavy lifting and carrying; must have fine motor skills; be able to grasp small items; kneeling; pushing; reaching above shoulder; ability to do a repetitive motion; and the ability to stand and walk for most of the day. Mobility requirement enough to move around the production area safely Visual Requirement: Must be able to visually read layout drawings; and assemble glovebox systems Hearing Requirement: Must be able to identify hazard sounds and be aware of the environment on the production floor for personal safety Mental Requirement: Comprehension, Organization, Reasoning, Decision Making, Communication, and Mathematics Benefits M. Braun offers an excellent benefits package which includes health insurance, dental insurance, vision insurance, 401K, life insurance, short-term and long-term disability, flexible spending account, and more. M. Braun encourages work / life balance through a flexible work schedule, a 38 hour work week, and the ability to choose a 4 day work week once training is complete (if desired). M. Braun provides Paid Time Off, Holidays, Floating Holidays and Volunteer Time to employees. M. Braun provides a Gas Assistance Program which provides $1,125.00 annually to cover gas to and from work! Additional perks include company outings, monthly raffles, pizza days, and more!