Assembly technician jobs in Massachusetts

The Electronics Assembly Technician I is a non-exempt position that reports to the Electronics Management Team. The Electronics Assembly Technician I is responsible for assembling and testing full assembly and individual sub assembly parts for Charm Sciences equipment. The pay range for this position is $17.50 to $23.00 per hour. Compensation will be determined based on education, experience, and other factors in accordance with applicable laws. Essential Functions Assemble electronic hardware utilizing hand tools and power tools. Perform testing and calibration of electronic assemblies and sub-assemblies using various meters and measuring devices. Perform precision cleaning and preparation of components for assembly/usage in subsystems or end product. Must follow detailed wiring diagrams and work instructions to properly assemble Charm Electronic test instruments and analyzers. Inspect and verify completed assemblies following test procedure documentation. Maintain a clean and clutter free workspace and keep equipment organized to increase production efficiency. Nothing in this job description restricts management s right to assign or reassign duties and responsibilities to this job at any time. Knowledge, Skills & Abilities Required: High school diploma and 2 years relevant certificate of training or 2+ year s relevant experience in Electronics Assembly. Understanding of Microsoft Office programs. Ability to communicate in written and verbal form. Ability to read and interpret drawings, parts lists, cable diagrams and workmanship procedures. Electro-Mechanical assembly skills. Preferred: 1 3 years GMP/GLP experience. Ability to give and receive feedback. Self-Motivated. Strong interpersonal skills, diligent and dependable. Ability to hand solder and wire electrical components, and crimping. Physical Requirements While performing the duties of this job, the employee is regularly required to talk, hear, and use fine motor skills. The employee is frequently required to stand, walk, sit, and reach. Must be able to lift/carry up to 50 pounds. The employee is occasionally required to bend, kneel, squat, and lift. Able to remain stationary for an extended length of time. Ability to read, write and interpret information. Able to visually inspect parts for defects. Exposure to compressed air blast under 80dB.

Primary Duties and ResponsibilitiesSchedule: Full-Time, Monday-FridayExperience Level: Entry to Experienced - We Train!Love Fixing Things? Turn Your Mechanical Skills into a Career at Aramsco!Are you the go-to person when things break? Do you enjoy tinkering, taking things apart, and figuring out how they work? Get paid to do what you love and build a rewarding career with Aramsco - we provide full training and tools to help you succeed! What You'll Do:Diagnose, repair, and maintain a variety of commercial cleaning and restoration equipment:Gas Engines (2, 3 & 4 cylinder) Truck-Mounted Carpet Cleaning UnitsPortable ExtractorsDehumidifiers, Air Scrubbers, HEPA Vacuums & more!Use manuals, schematics, and diagnostic tools to troubleshoot issues.Communicate with customers on repairs and service needs.Keep an organized, clean, and safe workspace.Collaborate with teammates and store staff to exceed customer expectations. Additional Additional Job Description Qualifications/ SkillsWhat You'll Get:✔️$22-24.50 hourly range + Monthly Bonus✔️Full Paid, On-the-Job Training - No Experience? No Problem!✔️Career Growth & Promotion Opportunities✔️Full Benefits Package Including:Medical, Dental & Vision InsurancePaid Vacation & Holidays 401(k) with Company MatchCompany-Paid Life Insurance✔️Steady Full-Time Hours (No Weekends!)✔️A Fun, Supportive Work Environment where your skills matter!What You Bring:Mechanical ability - from hobby work, small engines, or equipment repair.Basic set of mechanic's tools (required).Valid driver's license & clean driving record.Ability to lift 50+ lbs regularly.High school diploma or equivalent.Positive attitude & strong attention to detail.Bonus if you have: small engine, auto, HVAC, or appliance repair experience - or speak English/Spanish!Why Join Aramsco?Because here, we invest in YOU - your training, your growth, and your future. With 60+ locations and a growing national presence, there's no limit to where your career can go.Apply Now - Start Your New Career Today!✔️ Fast Application✔️ Quick Interview Process✔️ 1 week minimum Immediate Start Available

The Role The Production Technician is responsible for manicuring and packaging plant material and infused products. In this role, maintaining accuracy in weighing product, fulfilling product, labelling, and inventory is paramount. The Production Technician is also responsible for maintaining a perpetually clean workspace to provide a sterile environment for production of medical products. This person will also have some responsibility for tracking product electronically on the company MRP system to ensure compliance with state laws and program regulations. The ideal candidate has a relentlessly positive attitude, a strong work ethic, competitive and team-oriented spirit, and great attention to detail. Responsibilities Breakdown cured batches and extracted oil from the lab into multiple different weight increments (3.5 g, 7 g, ½ g and 1 g etc.) and package them accordingly Keep a precise count of all packaged product and weight(s) of product used for an accurate end of day reconciliation of packaged inventory and remaining inventory Package infused and plant material into proper containers with proper labeling to ensure compliance with state regulations Electronically convert packaged products in the state traceability system Exhibit competency in basic organizational skills, communication skills and windows based operating software Manage time efficiently in order to meet goals while consistently producing quality product Sanitation & cleanup of all processing areas throughout the day Other duties as assigned Qualifications High School Education or GED required 1+ years working in production environment required Experience processing medical cannabis or other botanicals highly desirable Must work well in a group and independently; demonstrate self-motivation and initiative Must be able to adapt quickly to changes in policy, procedure and technique Employee must exhibit personal hygiene and follow the health guidelines set forth by Green Thumb and the state while processing patient medicine Ability to listen well and communicate effectively with various audiences, especially with the direct supervisors and co-workers Ability to perform a monotonous task with great efficiency over 8-hour work periods without losing quality Employee must be able to follow basic instructions as well as be able to take constructive criticism from their managers so they can help maintain quality standards and production goals Must understand and comply with the rules, regulations, policies, and procedures of Green Thumb Must have a solid understanding of the Cannabis laws, rules and regulations and passion to further their understanding and knowledge of the industry and the laws. Additional Requirements Must pass any and all required background checks Must be and remain compliant with all legal or company regulations for working in the industry Must possess valid driver's license or state ID card Must be a minimum of 21 years of age Must be approved by state badging agency to work in cannabis industry Working Conditions While performing the duties of this job, the employee is regularly required to perform reaching, grasping, bending, stooping, talking, hearing, seeing and repetitive motions Must be able to sit and/or stand for extended periods of time while maintaining focus PHYSICAL DEMANDS: Must be able to lift, carry and balance up to 50 pounds (100 pounds with assistance) AND must be able to do so with extreme care and caution when working with plants and product The pay range is competitive and based on experience, qualifications, and/or location of the role. Positions may be eligible for a discretionary annual incentive program driven by organization and individual performance. Green Thumb Pay Range$18.50-$19 USD

Job Description At Curaleaf, we're redefining the cannabis industry with a strong commitment to quality, expertise, and innovation. As a leading global cannabis provider, our brands-including Curaleaf, Select, and Grassroots-offer premium products and services in both medical and adult-use markets. Join us at Curaleaf to be part of a high-growth, purpose-driven company that champions corporate social responsibility through our Rooted in Good initiative, supporting community outreach and positive change. Here, you'll have the opportunity to make a meaningful impact, drive innovation, and help shape the future of cannabis. Production Technician Job Type: Full-Time; Non-Exempt Shift: Monday- Friday, 2:30pm - 11:30pm Hourly Rate: $18.50/hr. Location: Webster, MA Who You Are: As a Production Technician, you will be responsible for the packaging and labeling of the finished goods at our cultivation and manufacturing centers. You will be responsible for the production of a variety of finished products including packaged, dried flower, pre-rolls, vape cartridges and vape pens, and infused products. Our production team is expected to maintain quality control measures to ensure high-quality products and will carry out day-to-day tasks including prepping, packaging, and labeling per standard operating procedures set by Curaleaf and our production management. What You Will Do: Stage product and packaging supplies across various production lines to meet daily production schedule Perform quality assurance protocols as designated by Curaleaf's procedures Increase operational efficiency and reduce waste through ownership, teamwork, communication and collaboration Perform in-process and post-process quality assurance, testing and conducting visual inspections to ensure all product meets or exceed Curaleaf's specifications and patient's expectations Ensure 100% compliance involving proper weighing, data recording, product tracking and security throughout the entire packaging process Operate in an efficient manner that also complies with all OSHA regulations, Curaleaf SOP's and all applicable required procedures Ensure each product is properly labeled in compliance with state regulations Work in a quick and efficient manner and strive to consistently increase productivity Maintain the organization and cleanliness of the extraction room while performing all duties What You Will Bring: High School Diploma or G.E.D minimum Effective communication skills working in a team-based environment Strong attention to detail skills working in a high-volume production environment Strong work ethic and the ability to be punctual, reliable, and contribute to a positive, professional work environment Ability to be trained on various production equipment, SOPs, and consistently meet performance expectations set by leadership Ability to perform repetitive tasks for long periods of time Even Better If: You have one year of manufacturing and packaging experience with a focus on ensuring product safety, consumer safety and satisfaction, and high product quality is strongly preferred Physical Requirements: Allergen warnings, potential exposure to dust, pollen, and plant pathogens. Exposure to cleaning solvents, such as high volumes of isopropyl alcohol. Daily use of provided PPE, such as masks, hair nets, beard covers, respirators, boot covers, scrubs, non-slip shoes, and Tyvek suits as necessary. Ability to work in confined spaces Exposure to loud noises, including but not limited to air compressors, packaging equipment, and alarms. Exposure to CO2 manufacturing procedures at OSHA approved CO2 levels. High-stress tolerance, adaptable, flexible ability to work in an ever-changing environment Massachusetts Hiring Range$18.50-$18.50 USD What We Offer: Career Growth Opportunities Competitive Pay and Benefits Generous PTO and Parental Leave 401(K) Retirement Plan Life/ Disability Insurance Community Involvement Referral Bonuses and Product Discounts Benefits vary by state, role type, and eligibility. Follow us on Social Media: Instagram: @curaleaf.usa Twitter: @Curaleaf_Inc LinkedIn: Curaleaf LinkedIn Curaleaf Holdings, Inc. (TSX: CURA) (OTCQX: CURLF) ("Curaleaf") is a leading international provider of consumer products in cannabis with a mission to enhance lives by cultivating, sharing, and celebrating the power of the plant. As a high-growth cannabis company known for quality, expertise and reliability, the Company, and its brands, including Curaleaf, Select, Grassroots, JAMS, Find and Zero Proof provide industry-leading service, product selection and accessibility across the medical and adult-use markets. Curaleaf International is the largest vertically integrated cannabis company in Europe with a unique supply and distribution network throughout the European market, bringing together pioneering science and research with cutting-edge cultivation, extraction, and production. Home | Curaleaf | Cannabis with Confidence Our Vision: To be the world's leading cannabis company by consistently delivering superior products and services and driving the global acceptance of cannabis. Our Values: Lead and Inspire. Commit to Win. ONE Curaleaf. Driven to Deliver Excellence. Curaleaf is an equal opportunity employer. Curaleaf recruits, employs, trains, compensates, and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status, and other protected status as required by applicable law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Individuals adversely impacted by the war on drugs are encouraged to apply. Current Curaleaf employees should apply for open positions through our Internal Job Board, which can be accessed via the link on The Leaf.

Job Description BROSCO by Boise Cascade is hiring for Millwork Assemblers. Do you like to work with your hands? Building things? Help provide housing for America? Apply today! Indoor warehouse. Starting pay $22.00/hour depending on experience + $1.00/hour Shift Differential + Bonus. Great benefits - starting day one! Full time work. Overtime available. Monday - Friday: Swing Shift BROSCO by Boise Cascade Company is the leading distributor of quality doors, windows, and millwork products in the Northeast since 1890. Boise Cascade Company has been in the business of manufacturing wood products and distributing building materials for over half a century. We are one of the largest producers of engineered wood products and plywood in North America and a leading U.S. wholesale distributor of building materials. Because our business is built on relationships, our associates are critical to our success. We are committed to investing in them and that is why we offer a comprehensive benefits package designed to have a positive impact on all areas on your life - from health and well-being, career, and community, to financial security and personal safety, with many benefits beginning on your first day of employment. Please review the responsibilities and needed qualifications below and apply today! Responsibilities Responsible for construction of doors and windows made to order. Check product and raw material specifications (lengths, angles). Set up door machinery and equipment to specifications. Transport raw materials and finished products to and from machinery, equipment and storage area. Load and unload inventory as needed. Apply and understand mathematical calculations and concepts involving fractions, decimals, percentages, etc. May manage and provide reports on production, quality, and order fulfillment process and performance. Maintain good housekeeping in work area. Follow safety programs and ensure compliance of OSHA regulation. May train, assign and oversee work of others and ensure work is complete and built to order specifications. May work with and assist location manager and sales team to promote and describe fabrication process to customers of assigned and new products. May be responsible for raw materials and finished goods inventory, materials order replenishment, and maintaining product pricing. Demonstrate strong commitment to safety, quality, environmental awareness, and continuous process improvement. Perform other duties and responsibilities as assigned. Qualifications Basic Qualifications: HS Diploma, GED or two (2) years equivalent work experience. Must be able to understand and communicate safety and other work related instructions. Alertness and ability to adapt to warehouse routines is required. Warehouse operations environment with considerable physical exertion. Preferred Qualifications: Typically more than three (3) years of experience in related job function. Role may require technical certification, or associates degree. Our Benefits Medical + Dental + Vision Flexible Spending Accounts + HRA 401(k) Retirement Savings Annual Incentives Paid Time Off (20/yr) and holidays (10/yr) Paid Parental Leave

Job Description Our client is seeking an experienced Electronics Technician to support hands-on assembly, testing, and troubleshooting of electronic assemblies in a manufacturing environment. This role focuses heavily on cable and wire harness assembly, electrical testing, and following detailed work instructions. Onsite | No Visa Sponsorship | No Relocation Assistance Work Schedule: Monday-Friday, 7AM-3PM Responsibilities: Conduct electrical testing and verification using digital multimeters. Support troubleshooting to ensure assemblies meet quality standards. Maintain a clean, organized, and safety-focused work environment. Assemble and terminate cable and wire harnesses for electronic equipment. Perform crimping, wire stripping, connector assembly, and light mechanical assembly. Collaborate with a small technical team while working independently when needed. Build and integrate electronic components and subassemblies using detailed work instructions. Qualifications/Must Haves: High school diploma or GED. Strong experience with crimping, wire stripping, and connector assembly. Proficient using digital multimeters for continuity, resistance, and basic measurements. Ability to read and follow wiring diagrams, procedures, and assembly documentation. 3+ years of hands-on experience in electronics assembly, cable assemblies, or wiring harnesses. Nice-to-Have: IPC-A-610 certification or training. Soldering experience (through-hole or connector work) Background supporting calibration or verification testing. Experience with oscilloscopes or other electronic test equipment. Benefits & Perks: Paid time off and holidays 401(k) with company match Health, dental, and vision insurance Opportunities for growth and advancement

reference job description. All Job Posting Locations (Location) Woburn Remote Type On-Site EEO Statement Boyd Corp is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

The Panther Group is currently seeking an Assembler for a contract to hire opportunity with a respected manufacturing company. This role is ideal for someone who enjoys hands-on work, pays close attention to detail, and has experience in small parts assembly. You will be working as a member of a production line to assemble headsets and their sub-assemblies and various other parts. Key Responsibilities: Assemble and test electromechanical components using a variety of tools and/or equipment according to required specifications, processes, and procedures. Conduct quality control checks. Escalate assembly issues to the production supervisor as needed. Perform repair work or rework as needed. Clean and maintain work area and equipment, including tools. Other duties as required. Requirements: No formal education credentials are required. 0-1 years of experience in a manufacturing setting. Hand dexterity to assemble small components required. Detail-oriented and consistent. Works well as a productive member of a team. Ability to troubleshoot and make necessary repairs. Position does not require any previous experience working with office software. This is a great opportunity with a reputable company to gain valuable experience in a hands-on manufacturing environment. Pay $17.50 per hour #INDSUCC

Job DescriptionDescription: Read blueprints, schematics, or other documentation to build products to specifications. Use hand tools, power tools, and specialized equipment to assemble products. Keep track of tools, parts, and supplies, and contact materials handlers when needed. Regularly inspect products to ensure they meet quality and completion standards, and resolve any issues Communicate with other stations on the assembly line, and with supervisors, leads, and engineers Complete forms, reports and other documentation per assembly instructions. Performs other duties as assigned. Requirements: Excellent hand-eye coordination required. Strong attention to detail required. Ability to work in a fast paced manufacturing environment. Flexibility to change tasks to meet schedule demands. Proficiency in reading and writing in English is essential for understanding technical documents, safety guidelines, and quality standards. High school diploma, trade school diploma or equivalent required. 1 year of related manufacturing experience preferred.

Basic Qualifications Associate's degree in related discipline or equivalent is required plus a minimum of 3 years of relevant experience. CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES: Representative Duties and Tasks Teardowns, builds and tests electromechanical devices that utilize precision optics. Assists engineering team with development and maintenance of written work procedures. Operate test equipment and prepare test reports Follow written work instructions Un-pack and pack sensitive instruments for shipment to vendors Work independently and with manufacturing teams Knowledge, Skills and Abilities Proficient use of hand tools Comfortable working under a microscope Cleanroom experience / working cleanroom assembly Ability to follow work instructions Experience in micro/precision assembly (medical devices, watchmaking, etc) Familiarity with ESD safe procedures Some experience in mechanical troubleshooting Ability to work independently and with cross functional teams What You Bring to the Table: Associate's degree in electrical engineering (or related field) or equivalent field experience Proficiency in electrical engineering concepts and design tools Strong written and verbal communication skills Ability to multi-task and think creatively U.S. citizenship required; security clearance preferred What sets you apart: Prior experience in optics / mirrors / cameras Ability to work comfortably under a microscope Demonstrated skill in use of hand tools and mechanical assembly Familiarity with cleanroom work / cleanroom procedures Familiarity with wiring diagrams / schematics Ability to run / operate Interferometer / Complex test equipment Interpretation of Interferometer Test results Familiarity with theodolites / optical surveying Familiarity with vacuum systems / leak checking systems Our Commitment to You: An exciting career path with opportunities for continuous learning and development. Research oriented work, alongside award winning teams developing practical solutions for our nation's security Flexible schedules with every other Friday off work, if desired (9/80 schedule) Competitive benefits, including 401k matching, flex time off, paid parental leave, healthcare benefits, health & wellness programs, employee resource and social groups, and more See more at gdmissionsystems.com/careers/why-work-for-us/benefits Workplace Options: This position is fully on site. While on-site, you will be a part of the Pittsfield Campus. Salary Note This estimate represents the typical salary range for this position based on experience and other factors (geographic location, etc.). Actual pay may vary. This job posting will remain open until the position is filled. Combined Salary Range USD $30.36 - USD $32.56 /Hr. Company Overview General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation. With a global team of 12,000+ top professionals, we partner with the best in industry to expand the bounds of innovation in the defense and scientific arenas. Given the nature of our work and who we are, we value trust, honesty, alignment and transparency. We offer highly competitive benefits and pride ourselves in being a great place to work with a shared sense of purpose. You will also enjoy a flexible work environment where contributions are recognized and rewarded. If who we are and what we do resonates with you, we invite you to join our high-performance team! Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Rochester Electronics is immediately hiring for an Engineering Technician I! At Rochester Electronics, we create an excellent employee experience focused on value, performance, motivation, recognition, and career growth. Many companies say their employees are their most important asset. At Rochester Electronics, we mean it! Outstanding low-cost medical, dental, vision, and prescription drug coverage, Rochester pays 92% of the premiums on behalf of its full-time employees Paid time off, including vacation, sick, and holiday Generous match 401K program Tuition reimbursement Flexible spending account And so much more! For the last 40 years, Rochester Electronics, in partnership with over 70 leading semiconductor manufacturers, has provided our valued customers with a continuous source of critical semiconductors. As an original manufacturer stocking distributor, Rochester has over 15 billion devices in stock encompassing more than 200,000-part numbers, providing the world's most extensive range of end-of-life (EOL) and broadest range of active semiconductors. As a licensed semiconductor manufacturer, Rochester has manufactured over 20,000 device types. With over 12 billion die in stock, Rochester can manufacture over 70,000 device types. General Summary An Engineering Technician works in conjunction with Operations, Engineering, and other technical staff to support and enable production, and develop, implement, train, and maintain manufacturing techniques and processes. Recognizes and utilizes prescribed techniques to solve problems. Can recommend and execute enhancements to product and process flows. Responsibilities Set-up, maintain, and operate equipment, optimize recipes, perform set-ups, and change overs with assistance or instruction. Assist and train operators with equipment and recipe related issues, with outside assistance. Perform with direction equipment setups, changeovers, and breakdowns to the product and equipment requirements. Provides initial response to and diagnostic and troubleshooting of product, equipment, calibration, software, and hardware issues and failures on the production floor by providing hands-on problem solving with moderate to high levels of oversight by designated engineering and senior technical staff. Support Operators and Engineers in establishing and maintaining high yielding, cost effective processes based on product needs and customer requirements, and reduce scrap and production waste. With direction and assistance from Engineering, will support the execution of design of experiments (DOE) and data gathering for analysis related to production of parts, components, subassemblies, and final builds; this occurs as needed based on production and resource demands. Effectively communicate in a positive and cooperative way with any level of coworker, as well as with customers, contractors, and vendors. Ensure production is complaint with Company policies, operating procedures, quality standards, processes, and task assignments. Performs additional duties, as assigned. Serve as a member on cross-functional project teams. Maintains well-organized and audit ready work areas. Maintains, trains to, and supports the implementation of technical documentation and generation of DCN's. Assist in Out of Control Action Plan (OCAP) execution under direction from management. Utilizes computer-based manufacturing systems to move product and enter data. Support activities for on-line adjustments to product, instruments, or equipment to improve processes to meet yield and cycle time requirements. Qualifications High school required, Associates degree or higher preferred, especially in an Engineering or technical field. 3+ years of relevant engineering or semiconductor assembly experience required; or other equivalent combination of education and experience. Familiarity with MIL-PRF-38535, MIL-STD-883, ISO9001 and EIA/JEDEC standards. Ability to work independently with little supervision. Developing electro-mechanical aptitude; proven ability to identify and resolve complex problems. Ability to work within a team and as an individual contributor with little independent autonomy in a fast-paced, changing environment. Effective verbal and written communications skills, with ability to effectively communicate with stakeholders at multiple levels in the organization and accurately follow written and verbal instruction. Must be able to effectively prioritize projects assigned, with direction from the process owner. Ability to work in a highly matrixed and diverse business environment. Understand work environment issues (i.e. basic OSHA regulations, etc.). Requires basic computer skills, familiarity with Microsoft office products Ability to work with basic electronic bench equipment (meters, oscilloscopes, power supplies, etc.) Equipment Used Capital equipment Component automated handling equipment Temperature forcing equipment Basic lab equipment Personal computers Telephone Rochester Electronics is committed to creating a diverse environment and is proud to be an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability status, age, veteran status, or other characteristics protected by applicable law. Rochester Electronics is committed to a culturally diverse workforce.

US Tech Solutions is a global staff augmentation firm providing a wide-range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit our website ************************ We are constantly on the lookout for professionals to fulfill the staffing needs of our clients, sets the correct expectation and thus becomes an accelerator in the mutual growth of the individual and the organization as well. Keeping the same intent in mind, we would like you to consider the job opening with US Tech Solutions that fits your expertise and skillset. Job Description Responsibilities: This is a key and critical role within the ASRC Group at Client's Healthcare in Andover, MA. This is an opportunity to be part of a well-seasoned winning team that performs product safety type testing for all medical product lines within Client's Andover. The product safety team plays very important roles in ensuring products designed by Client's are of the highest quality and comply with national and international standards requirements. Your responsibilities will be as follows: • Perform product safety testing on various product lines. • Execute tests under the direction of product safety engineers and write formal test reports. • Facilitate and maintain constant communications with project engineers. • Perform Verification and Validation tests for new designs. • Support the product safety groups ISO 17025 quality management system. Qualifications Profile: • ASEE (or ASET) with 5+ years' experience in electrical engineering. • Experience with product safety standards requirements, preferably for medical devices. • Highly motivated and passionate technician with attention to details and having the ability to get things done efficiently and timely. • The ability to work well in a team and possessing the skills and the ability to work independently. • Good problem solving skills (root cause analysis). • Excellent English skills, written and speaking. • Strong detailed focused and ability to write thorough, accurate documentation of test results, test procedures, test forms and quality management system records. • Experience with Microsoft tools such as MS project, Word, Excel, and Visio. Additional Information Regards Kushal kumar Contact: *************** *************** ext: 7941

K-Tek's core business is into temporary staffing, permanent placement and volume hiring. Since inception of our staffing solutions has grown multi-fold with global offices. We know what works best for our clients and what doesn't. This is the key differentiator and this is how we edge over the competition. Job Description Hi Kindly share accordingly. Key points to select the profiles : 1) Strong Post production support experience 2) Little experience with system admin role (All the profiles shared with me has good system admin experience, but production support at all. Please don't narrow the search only with system admin exp) 3) Good communication skills Location 1 - MTV CA Location 2 - Cambridge MA While sharing kindly share the location in which he is interested, moreover Interview mode - Google Hangout get their comfortability too. Description: L3 Technical Support Engineer Job Purpose: Handle complex technical support requests from Enterprise Travel customers. Monitor and support internal environments, applications and tools. Handle first level technical escalations as part of a support desk. Job Responsibilities: • Process support requests from customers, via email and telephone • Follow documented process flows and playbooks to resolve customer issues • Utilize debugging tools to triage partner issues autonomously • Accurately maintain case management system, and record status of work • Write code snippets under supervision • Respond to technical alerts, and troubleshoot as necessary • Identify when cases require escalation, and engage with higher support tiers to handoff cases • Identify opportunities for process improvements • Provide advanced technical troubleshooting of customer issues, including networking, and integration • It may be required to work with cross functional teams spread across multiple geographies • Provide mentoring and support to junior resources where appropriate Skills/Qualifications: • Technical support experience, preferably in Enterprise software, or the travel industry • Domain expertise - Contact center, Services, Tech Trouble shooting etc • System Administration experience • Expertise in web technology and protocols (HTTP, SSL, XML, FTP, etc) • Basic networking expertise and troubleshooting • Medium to advanced linux skills • Shell scripting experience • Experience reading, writing and troubleshooting at least one of Perl or Python • Experience with version control • Ability to read and construct XML • Familiarity with the Xymon open source product nice to have. • Strong analytical, troubleshooting and problem-solving skills • Strong attention to detail, and ability to follow processes Strong English oral and written communications skills to interact with customers and internal stakeholders • Proven ability to manage conflicting priorities under guidance • Experience working with teams in different timezones a plus • Experience documenting support workflows and processes • Development experience a plus • 3-5 yrs of experience providing technical support and environment support Additional Information All your information will be kept confidential according to EEO guidelines.

At Curaleaf, we're redefining the cannabis industry with a strong commitment to quality, expertise, and innovation. As a leading global cannabis provider, our brands-including Curaleaf, Select, and Grassroots-offer premium products and services in both medical and adult-use markets. Join us at Curaleaf to be part of a high-growth, purpose-driven company that champions corporate social responsibility through our Rooted in Good initiative, supporting community outreach and positive change. Here, you'll have the opportunity to make a meaningful impact, drive innovation, and help shape the future of cannabis. Production Technician Job Type: Full-Time; Non-Exempt Shift: Monday- Friday, 2:30pm - 11:30pm Hourly Rate: $18.50/hr. Location: Webster, MA Who You Are: As a Production Technician, you will be responsible for the packaging and labeling of the finished goods at our cultivation and manufacturing centers. You will be responsible for the production of a variety of finished products including packaged, dried flower, pre-rolls, vape cartridges and vape pens, and infused products. Our production team is expected to maintain quality control measures to ensure high-quality products and will carry out day-to-day tasks including prepping, packaging, and labeling per standard operating procedures set by Curaleaf and our production management. What You Will Do: Stage product and packaging supplies across various production lines to meet daily production schedule Perform quality assurance protocols as designated by Curaleaf's procedures Increase operational efficiency and reduce waste through ownership, teamwork, communication and collaboration Perform in-process and post-process quality assurance, testing and conducting visual inspections to ensure all product meets or exceed Curaleaf's specifications and patient's expectations Ensure 100% compliance involving proper weighing, data recording, product tracking and security throughout the entire packaging process Operate in an efficient manner that also complies with all OSHA regulations, Curaleaf SOP's and all applicable required procedures Ensure each product is properly labeled in compliance with state regulations Work in a quick and efficient manner and strive to consistently increase productivity Maintain the organization and cleanliness of the extraction room while performing all duties What You Will Bring: High School Diploma or G.E.D minimum Effective communication skills working in a team-based environment Strong attention to detail skills working in a high-volume production environment Strong work ethic and the ability to be punctual, reliable, and contribute to a positive, professional work environment Ability to be trained on various production equipment, SOPs, and consistently meet performance expectations set by leadership Ability to perform repetitive tasks for long periods of time Even Better If: You have one year of manufacturing and packaging experience with a focus on ensuring product safety, consumer safety and satisfaction, and high product quality is strongly preferred Physical Requirements: Allergen warnings, potential exposure to dust, pollen, and plant pathogens. Exposure to cleaning solvents, such as high volumes of isopropyl alcohol. Daily use of provided PPE, such as masks, hair nets, beard covers, respirators, boot covers, scrubs, non-slip shoes, and Tyvek suits as necessary. Ability to work in confined spaces Exposure to loud noises, including but not limited to air compressors, packaging equipment, and alarms. Exposure to CO2 manufacturing procedures at OSHA approved CO2 levels. High-stress tolerance, adaptable, flexible ability to work in an ever-changing environment Massachusetts Hiring Range$18.50-$18.50 USD What We Offer: Career Growth Opportunities Competitive Pay and Benefits Generous PTO and Parental Leave 401(K) Retirement Plan Life/ Disability Insurance Community Involvement Referral Bonuses and Product Discounts Benefits vary by state, role type, and eligibility. Follow us on Social Media: Instagram: @curaleaf.usa Twitter: @Curaleaf_Inc LinkedIn: Curaleaf LinkedIn Curaleaf Holdings, Inc. (TSX: CURA) (OTCQX: CURLF) ("Curaleaf") is a leading international provider of consumer products in cannabis with a mission to enhance lives by cultivating, sharing, and celebrating the power of the plant. As a high-growth cannabis company known for quality, expertise and reliability, the Company, and its brands, including Curaleaf, Select, Grassroots, JAMS, Find and Zero Proof provide industry-leading service, product selection and accessibility across the medical and adult-use markets. Curaleaf International is the largest vertically integrated cannabis company in Europe with a unique supply and distribution network throughout the European market, bringing together pioneering science and research with cutting-edge cultivation, extraction, and production. Home | Curaleaf | Cannabis with Confidence Our Vision: To be the world's leading cannabis company by consistently delivering superior products and services and driving the global acceptance of cannabis. Our Values: Lead and Inspire. Commit to Win. ONE Curaleaf. Driven to Deliver Excellence. Curaleaf is an equal opportunity employer. Curaleaf recruits, employs, trains, compensates, and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status, and other protected status as required by applicable law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Individuals adversely impacted by the war on drugs are encouraged to apply. Current Curaleaf employees should apply for open positions through our Internal Job Board, which can be accessed via the link on The Leaf.

The Electronics Assembly Technician I is a non exempt that reports to the Electronics Management Team The Electronics Assembly Technician I is responsible for assembling and testing full assembly and individual sub assembly parts for Charm Sciences equipment The payrangefor this position is 1750 to 2300 per hour Compensation will be determined based on education experience and other factors in accordance with applicable laws Essential Functions Assemble electronic hardware utilizing hand tools and power tools Perform testing and calibration of electronic assemblies and sub assemblies using various meters and measuring devices Perform precision cleaning and preparation of components for assemblyusage in subsystems or end product Must follow detailed wiring diagrams and work instructions to properly assemble Charm Electronic test instruments and analyzers Inspect and verify completed assemblies following test procedure documentation Maintain a clean and clutter free workspace and keep equipment organized to increase production efficiency Nothing in this job description restricts managements right to assign or reassign duties and responsibilities to this job at any time Knowledge Skills & Abilities Required High school diploma and 2 years relevant certificate of training or 2 years relevant experience in Electronics Assembly Understanding of Microsoft Office programs Ability to communicate in written and verbal form Ability to read and interpret drawings parts lists cable diagrams and workmanship procedures Electro Mechanical assembly skills Preferred 1 3 years GMPGLP experience Ability to give and receive feedback Self MotivatedStrong interpersonal skills diligent and dependable Ability to hand solder and wire electrical components and crimping Physical Requirements While performing the duties of this job the employee is regularly required to talk hear and use fine motor skills The employee is frequently required to stand walk sit and reach Must be able to liftcarry up to 50 pounds The employee is occasionally required to bend kneel squat and lift Able to remain stationary for an extended length of time Ability to read write and interpret information Able to visually inspect parts for defects Exposure to compressed air blast under 80dB

Many employers offer jobs; at Boise Cascade, we offer career opportunities. We are one of the largest manufacturers of plywood and engineered wood products in North America and are the only wholesale stocking distributor for building products that can service the entire United States. We offer a wide range of entry-level careers for new workers and advanced career opportunities for seasoned professionals. Our broad national footprint provides opportunities in many career fields including sales, technical design/drafting, engineering, maintenance, I/T, administrative, production, warehousing and distribution and CDL truck driving. We welcome diverse backgrounds, views, and skills as we believe it results in stronger teams, inspired solutions, and greater agility as an organization. Boise Cascade has an exciting opening for a Millwork Assembler. Please review the responsibilities and needed qualifications below and apply today! Responsibilities * Responsible for construction of doors and windows made to order. * Check product and raw material specifications (lengths, angles, size). * Transport raw materials and finished products to and from machinery, equipment and storage area. * Apply and understand mathematical calculations and concepts involving fractions, decimals, percentages, etc. * Maintain good housekeeping in work area. * Follow safety programs and ensure compliance of OSHA regulation. * Demonstrate strong commitment to safety, quality, environmental awareness, and continuous process improvement. * Perform other duties and responsibilities as assigned. Qualifications Basic Qualifications: HS Diploma, GED or two (2) years equivalent work experience. Must be able to understand and communicate safety and other work-related instructions. Alertness and ability to adapt to warehouse routines is required. Warehouse operations environment with considerable physical exertion. Preferred Qualifications: Typically more than three (3) years of experience in related job function. Role may require technical certification, or associates degree. About Boise Cascade Boise Cascade has been in the business of manufacturing wood products and distributing building materials for over half a century. Today we're one of the largest manufacturers of plywood and engineered wood products in North America - and the only wholesale stocking distributor for building products that can service the entire United States. Because our business is built on relationships, our associates are critical to our success. And we're committed to investing in them. That's why we offer a comprehensive benefits package designed to have a positive impact on all areas of your life - from health and well-being, career and community, to financial security and personal safety, with many benefits beginning on your first day of employment. We call it, Total Rewards. Here's a snapshot of what we offer: Our Benefits * Medical + Prescription Drug * Dental + Vision * Flexible Spending Accounts (Healthcare + Dependent Care) * 401(k) Retirement Savings with company contribution * Paid Time Off (20 days per year) * Paid Holidays (10 per year) * Paid Parental Leave (6 weeks) * Life Insurance

assembler b vacuum braze All Job Posting Locations (Location) Woburn Remote Type On-Site EEO Statement Boyd Corp is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Basic Qualifications Associate's degree in related discipline or equivalent is required plus a minimum of 3 years of relevant experience. CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Developing mission-critical systems that help keep people safe is what we do. At General Dynamics Mission Systems, you'll be part of the team that helps heroes make a true impact. The work we do is important. The challenges we face are career-defining. The opportunity we can offer is one-of-a-kind. We apply advanced technologies such as Artificial Intelligence, Blockchain, AR/VR, Cloud Native and Quantum Physics to solve our customers' missions in cyber, RF, undersea, interstellar and everything in between. Working with Engineering, Operations Support and individuals in other departments, the Advanced Engineering Technician will support engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electro mechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment. This may entail performing the following: Interprets basic engineering drawings, diagrams and schematics Constructs, modifies, debugs, troubleshoots, calibrates, tests and adjusts a variety of tools, equipment and systems Conducts, analyzes and documents statistically based experiments to define process parameters Implements and documents complex solutions for process improvement Designs and constructs basic tooling and fixtures to accomplish unique tasks Organizes, analyzes and interprets data to identify cause/effect relationships and recommends resolution/process improvement What you'll experience: Technologies that aren't just top-notch, they're often top-secret A team of bold thinkers committed to exploring what's next Opportunities to gain new knowledge - as it's discovered What you bring to the table: An Associate's degree in related discipline or equivalent plus a minimum of 3 years of relevant experience Solid knowledge and proficiency in the use of fabrication tools Ability to fabricate complex hardware Solid knowledge of generally accepted technical theory What sets you apart: Team player who thrives in collaborative environments and revels in team success Commitment to ongoing professional development Superior communication and collaboration skills Salary Note This estimate represents the typical salary range for this position based on experience and other factors (geographic location, etc.). Actual pay may vary. This job posting will remain open until the position is filled. Combined Salary Range USD $30.36 - USD $32.56 /Hr. Company Overview General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation. With a global team of 12,000+ top professionals, we partner with the best in industry to expand the bounds of innovation in the defense and scientific arenas. Given the nature of our work and who we are, we value trust, honesty, alignment and transparency. We offer highly competitive benefits and pride ourselves in being a great place to work with a shared sense of purpose. You will also enjoy a flexible work environment where contributions are recognized and rewarded. If who we are and what we do resonates with you, we invite you to join our high-performance team! Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

US Tech Solutions is a global staff augmentation firm providing a wide-range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit our website ************************ We are constantly on the lookout for professionals to fulfill the staffing needs of our clients, sets the correct expectation and thus becomes an accelerator in the mutual growth of the individual and the organization as well. Keeping the same intent in mind, we would like you to consider the job opening with US Tech Solutions that fits your expertise and skillset. Job Description Responsibilities: This is a key and critical role within the ASRC Group at Client's Healthcare in Andover, MA. This is an opportunity to be part of a well-seasoned winning team that performs product safety type testing for all medical product lines within Client's Andover. The product safety team plays very important roles in ensuring products designed by Client's are of the highest quality and comply with national and international standards requirements. Your responsibilities will be as follows: • Perform product safety testing on various product lines. • Execute tests under the direction of product safety engineers and write formal test reports. • Facilitate and maintain constant communications with project engineers. • Perform Verification and Validation tests for new designs. • Support the product safety groups ISO 17025 quality management system. Qualifications Profile: • ASEE (or ASET) with 5+ years' experience in electrical engineering. • Experience with product safety standards requirements, preferably for medical devices. • Highly motivated and passionate technician with attention to details and having the ability to get things done efficiently and timely. • The ability to work well in a team and possessing the skills and the ability to work independently. • Good problem solving skills (root cause analysis). • Excellent English skills, written and speaking. • Strong detailed focused and ability to write thorough, accurate documentation of test results, test procedures, test forms and quality management system records. • Experience with Microsoft tools such as MS project, Word, Excel, and Visio. Additional Information Regards Kushal kumar Contact: *************** *************** ext: 7941