Assembly technician jobs in Norfolk, VA

Competitive Pay: This position offers an hourly wage ranging from $22.00/hr. to $28.00/hr., depending on experience and qualifications. Join our team as an Assembler and help build high-quality modular systems that power industry-leading solutions. You'll work from blueprints, install mechanical components, and ensure every project meets exacting standards. If you're detail-oriented, mechanically skilled, and thrive in a fast-paced, team-driven environment, this role is for you! What You'll Do: * Interpret and work from blueprints, technical drawings, and schematics to ensure accurate assembly. * Collaborate with the assembly team and contractors to efficiently complete modular skids and assist with piping system installations. * Install air compressors and related equipment within modular units. * Assemble and install condensate tubing systems and associated components. * Mount dampers, ductwork, and compressor accessories according to specifications. * Perform structural finishing tasks, including trimming openings, doors, and roofs. * Cut and install prefabricated wall and roof panels per design requirements. * Finish concrete floors and bases to meet quality standards. * Support and contribute to continuous process improvement initiatives. * Maintain a professional and positive image when interacting with customers, vendors, and team members. * Keep work areas clean, organized, and safe at all times. * Occasionally travel to customer sites for offsite assembly and installation. * Perform other duties as assigned to support project success. What You'll Need: * Ability to work independently with minimal supervision and deliver results. * Strong mechanical aptitude and hands-on experience with assembly tasks. * Exceptional attention to detail and commitment to quality. * Punctuality and a strong sense of urgency to meet deadlines. * Excellent problem-solving skills and adaptability in dynamic environments. * A collaborative mindset with the ability to work effectively with team members, customers, and contractors. * Proficiency in using tape measures, hand tools, and power tools. * Ability to read and interpret technical drawings and schematics. * Willingness to work overtime and weekends as needed. * Positive attitude, strong work ethic, and organized work habits for unsupervised tasks. * Commitment to "doing it right the first time" and delivering high-quality results. * Technical knowledge combined with clear communication skills. * Valid Driver's License and ability to pass a drug test and background check. * Physical ability to sit, stand, bend, and perform repetitive tasks for extended periods. Why Join OTC Industrial Technologies? * Comprehensive Benefits: Our benefits package includes medical, dental, and vision care coverage, short-and long-term disability coverage, and life insurance. We also offer a wellness discount and a stipend for safety shoes & glasses. * Financial Security: We provide a 401(k) savings plan with an employer match of 50% on the dollar up to 6%, robust referral bonuses, and relocation assistance. * Work-Life Balance: Enjoy paid time off (PTO) and tuition assistance to support your career growth and personal life. * Career Growth Opportunities: At OTC Industrial Technologies, we believe in investing in our employees' development. We offer various training programs and career advancement opportunities to help you reach your full potential. At OTC Industrial Technologies, we believe that our employees are our greatest strength. Through investment in our people and growth from within, we believe in providing you with a wide variety of opportunities to accelerate your career potential as you help us drive change to move our business forward. For over 60 years, employing and developing the best-in-class talent has been at the forefront of our success. By coupling our teams' hands-on experience with a wide range of products from top vendors, we provide customers with the best quality products and technical application expertise and services at the lowest possible costs. Working with OTC Industrial Technologies is perfect for purpose driven individuals who are motivated to be part of an exciting transformational company.

If you love engaging in manual projects supporting the U.S Navy and our U.S Naval Ships, Serco has a great opportunity for you! Serco is hiring a Junior Mechanical Assembler to be part of a dynamic team supporting our US. Navy withequipment, and C5ISR system installations located in the beautiful surroundings of NewportNews, Virginia. Serco supports our US Naval Ships with successful and safe work by providing cabling, equipment, and C5ISR system installations for our Military. You will join an amazing team to fabricate, and assemble various electromechanical and electronic assemblies by applying appropriate safety techniques You will also play a critical role in ensuring that successful and safe work is performed on-board U.S. Naval Ships and our Military installations, which is vital to our Mission to protect and serve our Military. **In this role, you will:** + Follow blueprints, guidelines, and/or diagrams to fabricate and assemble various electromechanical and electronic assemblies. + Perform work with standard concepts, practices, and procedures within field. + Rely on experience and judgment to plan and accomplish goals. + Work on-board U.S. Naval Ships and military installations in an area that is somewhat uncomfortable due to drafts, noise, temperature variation and the like and with equipment where carelessness would probably result in minor cuts, bruises, muscle strains, serious injury, or death. **ABOUT OUR SSM WORK!** **GET TO KNOW YOUR RECRUITER!** **Qualifications** To be successful in these roles, you will have: + The ability to obtain and maintain a secret clearance. + High School Diploma or GED. + The ability to obtain and gain access to shipyards (NAVSTA & DBIDS), undergo a background investigation, and pass a drug screening. + The ability to obtain a Firewatch and Cable Installer certification. + 2 years of Shipboard experience in a related field. and/orcombination of experience in the following areas: + Ability to bolt/unbolt cableways, deck plates & equipment + Drill holes (with supervision) + Operate light machinery/ equipment (with training) + Position, join, align, wrap & seal pipe & conduit sections + Ability to follow directions of senior employees + Carry equipment & clean spaces + Remove lagging & paint + The ability to Identify safety concerns in immediate work environment + Sound technical knowledge base of discipline's standard concepts, principles, and techniques. + The ability to work in high heat spaces, climb shipyard dry dock stairs/ladders, work in kneeling position for layout of cable runs under false decking, lift up to 50 pounds with 80% of work requiring carrying, pushing, and/or pulling up to 40 pounds for majority of shift while being in a standing, crouching, or walking position. + The ability and bewilling to travel up to 10% to various work sites. + The ability to work independently, in a team environment and under stressful conditions with tight deadlines. + The ability to work in Newport News, VA. Additional desired experience and skills: + An active DoD Secret Clearance + An OSHA Certification If you are interested in supporting and working with our Systems Integration and Installation Businessand joining a passionate Serco team, then submit your application now for immediate consideration. It only takes a few minutes and could change your career! Military Veterans and Spouses encouraged to apply! **Company Overview** Serco Inc. (Serco) is the Americas division of Serco Group, plc. In North America, Serco's 9,000+ employees strive to make an impact every day across 100+ sites in the areas of Defense, Citizen Services, and Transportation. We help our clients deliver vital services more efficiently while increasing the satisfaction of their end customers. Serco serves every branch of the U.S. military, numerous U.S. Federal civilian agencies, the Intelligence Community, the Canadian government, state, provincial and local governments, and commercial clients. While your place may look a little different depending on your role, we know you will find yours here. Wherever you work and whatever you do, we invite you to discover your place in our world. Serco is a place you can count on and where you can make an impact because every contribution matters. To review Serco benefits please visit: *********************************************************** . If you require an accommodation with the application process please email: ******************** or call the HR Service Desk at ************, option 1. Please note, due to EEOC/OFCCP compliance, Serco is unable to accept resumes by email. Candidates may be asked to present proof of identify during the selection process. If requested, this will require presentation of a government-issued I.D. (with photo) with name and address that match the information entered on the application. Serco will not take possession of or retain/store the information provided as proof of identity. For more information on how Serco uses your information, please see our Applicant Privacy Policy and Notice (**************************************** . Serco does not accept unsolicited resumes through or from search firms or staffing agencies without being a contracted approved vendor. All unsolicited resumes will be considered the property of Serco and will not be obligated to pay a placement or contract fee. If you are interested in becoming an approved vendor at Serco, please email ********************* . Serco is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics. **Pay Transparency** Our Total Rewards package includes competitive pay, performance-based incentives, and benefits that promote well-being and work-life balance-so you can thrive both professionally and personally. Eligible employees also gain access to a wide range of benefits from comprehensive health coverage and health savings accounts to retirement plans, life and disability insurance, and time-off programs that support work-life balance. Program availability may vary based on factors such as contract type, location, hire date, and applicable collective bargaining agreements. Salary range: The range for this position can be found at the top of the posting. This range is provided as a general guideline and represents a good faith estimate across all experience levels. Actual base salary will be determined by a variety of factors, including but not limited to, the scope of the role, relevant experience, job-related knowledge, education and training, key skills, and geographic market considerations. For roles available in multiple states, the range may vary to reflect differences in local labor markets. In addition to base salary, eligible positions may include other forms of compensation such as annual bonuses or long-term incentive opportunities. Benefits HIGHLIGHTS - Comprehensible Benefits for Full-time Employees (Part-time members receive a customized package tailored to their role). + Medical, dental, and vision insurance + Robust vacation and sick leave benefits, and flexible work arrangements where permitted by role or contract + 401(k) plan that includes employer matching funds + Tuition reimbursement program + Life insurance and disability coverage + Optional coverages you can buy, including pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection + Birth, adoption, parental leave benefits + Employee Assistance Plan that includes counseling conditions + Specific benefits are dependent upon the specific contract as well as whether the position is covered by a collective bargaining agreement or the Service Contract Act. To review all Serco benefits please visit: ***************************************** . Serco complies with all applicable state and local leave laws, including providing time off under the Colorado Healthy Families and Workplaces Act for eligible Colorado residents, in alignment with our policies and benefit plans. The application window for this position is for no more than 60 days. We encourage candidates to apply promptly after the posting date, as the position may close earlier if filled or if the application volume exceeds expectations. Please submit applications exclusively through Serco's external (or internal) career site. This is a U.S.-based role. If an applicant has any concerns with job posting compliance, please send an email to: ******************** . Click here to apply now (*********************************************************************************************************************************************************** **New to Serco?** Join our Talent Community! (*************************************************** **ID** _70165_ **Recruiting Location : Location** _US-VA-Newport News_ **Category** _Production/Skilled Trade/Warehouse_ **Position Type** _Full-Time_ **Security Clearance** _Other_ **Clearance Details** _Ability to obtain and maintain a Secret Clearance_ **Telework** _No - Teleworking not available for this position_ **Campaign** _LPShipMod_ **Salary Range/Amount** _$39330.00 - $58996.00_

Connect Talent Solutions is seeking an entry-level Assembly Technician to join our team on a short-term contract basis. As an Assembly Technician, you will be responsible for constructing wiring and harnesses according to specifications and quality standards. This is a hands-on role that requires attention to detail, technical aptitude, and the ability to work in a fast-paced environment. The successful candidate will play a crucial role in ensuring the successful assembly and integration of electrical components. Responsibilities: - Read and interpret technical drawings, diagrams, and work instructions to understand the wiring and harness assembly requirements. - Assemble electrical components, wires, connectors, and other parts into wiring harnesses and panels using hand tools, crimpers, and soldering equipment. - Strip, cut, and label wires accurately, ensuring proper lengths and connections. - Follow established procedures and quality standards to ensure compliance with specifications and industry regulations. - Conduct quality checks at each stage of the assembly process to identify and resolve any defects or inconsistencies. - Collaborate with the engineering and production teams to provide feedback on process improvements and identify any issues that arise during assembly. - Maintain a clean and organized work area, ensuring that tools and equipment are properly stored and maintained. - Adhere to safety guidelines and protocols to create a safe working environment for yourself and others. - Meet production targets and deadlines while maintaining a high level of accuracy and attention to detail. Qualifications: - High school diploma or equivalent. - Previous experience in assembly or manufacturing is preferred but not required. This position is suitable for entry-level candidates looking to gain hands-on experience. - Basic understanding of electrical components, wiring, and harness assembly principles. - Familiarity with hand tools such as crimpers, strippers, and soldering equipment. - Ability to read and interpret technical drawings, diagrams, and work instructions. - Strong attention to detail and the ability to follow instructions precisely. - Good manual dexterity and hand-eye coordination. - Excellent time management skills and the ability to work efficiently in a fast-paced environment. - Strong problem-solving skills and the ability to troubleshoot and resolve assembly issues. - Good communication skills and the ability to work effectively as part of a team. Note: This is a short-term contract position with the potential for extension based on project needs and individual performance. We offer competitive compensation and the opportunity to gain valuable experience in the field of assembly and manufacturing. If you are a motivated individual with a passion for hands-on work and a desire to learn and grow, we encourage you to apply for the position of Entry-Level Assembly Technician - Wiring and Harnesses. To apply, please submit your resume and a brief cover letter outlining your interest in the role and relevant experience.

Title: Production Technician Virginia Correctional Enterprises (VCE): #00091 State Role Title: Admin/Office Specialist III Hiring Range: $38,206 - $57,311 Pay Band: UG Agency Website: ********************** Recruitment Type: General Public - G Job Duties To enhance the correctional programs of the Commonwealth of Virginia by operating a viable business entity that provides jobs and work skills for sentences inmates to help them successfully re-enter society, and offers quality goods and services to our customers, on time and at a fair price. To provide support operations in the production of Ink & Toner rebuild/ remanufacturing, and Janitorial and Drug Kit assembly by performing accurate data entry, purchasing, inventory control, customer service, reporting, and prioritizing job production for the production staff at the plant. Virginia Correctional Enterprises (VCE) is a manufacturing and service agency that is focused on providing meaningful jobs and work skills for offenders and offering quality goods and services to our customers. For more information on our products, services and locations visit govce.net If hired by VCE you will start or restart a 12-month probationary period. Minimum Qualifications Proficiency in computer keyboarding and MS Word, Outlook, and Excel. Proficiency in planning, organizing, record-keeping, purchasing, problem-solving, and training. Ability to effectively manage time, maintain attention to detail, prioritize, and make decisions. Ability to work independently, resolve problems, and perform effectively in complex work situations that involve multi-tasking and procedural requirements. Ability to work in environments in which production, chemical, equipment or other environmental risks may be present. Ability to communicate clearly both orally and in writing, listen effectively and handle difficult situations. High School Diploma or GED. Prior experience in an office or manufacturing environment Additional Considerations Experience in production planning or scheduling. Experience with a ERP/MRP system. Special Instructions You will be provided a confirmation of receipt when your application and/or résumé is submitted successfully. Please refer to “Your Application” in your account to check the status of your application for this position. If selected as a finalist with the VADOC, candidates can expect the following: Background Investigation Requirements: All applicants are subject to a background investigation. Investigations may include fingerprint checks (State Police, FBI); local agency checks; employment verification; verification of education (relevant to employment); credit checks; and other checks based on the position. Drug Testing Requirements: Applicants applying to a designated safety sensitive position are subject to a pre-employment drug screen. Marijuana use is prohibited for positions that require possession of a firearm or a Commercial Driver's License in the performance of official duties such as Corrections Officers, Probation Officers, Tractor Trailer Drivers and others. Application Requirements: Application and/or résumé for this position are only accepted electronically through the Commonwealth of Virginia's Electronic Recruitment System. All applications should be submitted by 11:55pm on the closing date for the position. Mailed, emailed, faxed, or hand delivered applications and/or résumés will not be accepted. The decision to interview an applicant is based solely on the information received for this position from the electronic application and/or résumé. Layoff Preferences: Applicants who possess an Interagency Placement Screening Form (Yellow Form) or a Preferential Hiring Form (Blue Form) as issued under the Department of Human Resources Management (DHRM) Policy 1.30 Layoff (Commonwealth of VA employees only) MUST attach these forms when submitting their state application and/or résumé. VADOC is an EEO employer and is committed to supporting workforce diversity, equitable opportunities and inclusivity. Reasonable accommodations are available upon request. VADOC values our Veterans and encourages all to apply and receive preference in the hiring process. AmeriCorps, Peace Corps, and other nation service alumni are also encouraged to apply. Click here for more information: Virginia Values Veterans (V3) Program - Virginia Department of Veterans Services. Contact Information Name: Human Resources Phone: ****************************** Email: EMAILED APPLICATIONS/RÉSUMÉS WILL NOT BE ACCEPTED FOR THIS POSITION In support of the Commonwealth's commitment to inclusion, we are encouraging individuals with disabilities to apply through the Commonwealth Alternative Hiring Process. To be considered for this opportunity, applicants will need to provide their AHP Letter (formerly COD) provided by the Department for Aging & Rehabilitative Services (DARS), or the Department for the Blind & Vision Impaired (DBVI). Service-Connected Veterans are encouraged to answer Veteran status questions and submit their disability documentation, if applicable, to DARS/DBVI to get their AHP Letter. Requesting an AHP Letter can be found at AHP Letter or by calling DARS at ************. Note: Applicants who received a Certificate of Disability from DARS or DBVI dated between April 1, 2022- February 29, 2024, can still use that COD as applicable documentation for the Alternative Hiring Process.

Job DescriptionAssembler - Virginia Beach, VAHiring through PeopleShare Schedule: Full-Time, First ShiftPay: Starting at $12.41/hr PeopleShare is seeking an Assembler to join a manufacturing team in Virginia Beach. This role involves assembling products on the production floor to meet customer specifications.Responsibilities: Assemble, laminate, and fasten products using hand tools Fold and pack cartons; stack and strap goods Perform quality checks and complete required documentation Maintain a clean and safe work environment Follow all safety and efficiency standards Requirements: Must be 18 years or older Ability to lift up to 50 lbs regularly Experience in assembly or reading blueprints preferred Ability to work in a fast-paced, team-oriented environment Why PeopleShare? Competitive pay, steady schedule, and opportunity to grow with a leading employer in the Virginia Beach area. IND30

Engineering Tech I The purpose of this position is to design and prepare timely, safe and cost-effective natural gas infrastructure improvements including system replacements, relocations due to state, municipal, and private entity construction conflicts, system reinforcements, and system expansions for Virginia Natural Gas. Designs include applicable CAD drawings, permits, and cost estimates for system improvements which may include bridge attachments, railroad crossings and directional bore operations. The incumbent also coordinates customers & requirements with the various departments and other prevailing authorities. Position will reside at the Virginia Natural Gas corporate headquarters in Virginia Beach, VA. Functional Expertise: Provide quality control of geospatial data and mapping products Researches facility records in GIS and project as-builts Draft city, state and railroad right-of-way permits and traffic control plans as required. Business Acumen: Analyze construction proposals for DOT, municipal, and private projects for conflicts with existing gas utilities and propose recommendations to resolve conflicts Develop timely and accurate cost estimates for construction projects, new gas main installations, plastic and steel main replacements, reinforcements and other system support projects as required Engagement: Collaborates with engineers, construction, and operations to produce effective drawings Collaborates on facility relocations with outside parties including county, municipal and state government representatives, road contractors and developers Meet and negotiate with city and state officials, engineers, and construction contractors to resolve conflicts in a timely manner and relay Company policy, procedure, and other information relative to the gas industry Influence customer satisfaction by responding to customer needs, keeping customers informed and ensuring work is scheduled in an effective manner Driving Results: Create construction designs using MicroStation, AutoCAD, GIS and other applications Monitors projects to ensure on-time delivery of plans to state, county and municipal authorities Create a project AFE for design and prepare internal documents including ARM BCA/PWR Ensure that compliance with all engineering principles, gas operating standards, local code, state and federal rules, regulations, mandates and statutes is maintained by preparing and/or revising designs as necessary for all gas facilities installed Education and Experience: Required: BA/BS year degree with 3 years work related experience Knowledge of natural gas distribution system facilities Preferred: • Some level of GIS, engineering, or technical education or experience Or Equivalent academic education and experience Skills: Required: Valid driver's license Drafting ability - advanced proficiency One or more industry standard CAD Packages (MicroStation, AutoCAD, TurboCAD etc) - advanced proficiency Work Prioritization - advanced proficiency Ability to read, interpret and apply engineering and architectural plans - intermediate proficiency Excellent interpersonal communication skills Mathematical aptitude - intermediate proficiency Proficiency with variety of GIS concepts, practices, and procedures MS Excel, Word and PowerPoint - intermediate proficiency ArcGIS - basic proficiency ARM - basic proficiency Certifications/Licenses: Preferred: • GIS Certification Working Conditions/Physical Requirements: The incumbent works in an office environment with a hybrid schedule, 4 days per week with 1 remote day from home, and subject to change as business needs dictate. The incumbent may/will be exposed to varying outdoor weather conditions. The incumbent may/will be exposed to construction related activities This position occasionally requires prolonged standing or walking. This position occasionally requires the incumbent to reach above shoulder-level. This position occasionally requires the incumbent to bend, kneel, crouch, or crawl. This position requires the ability to lift up to 25 pounds. Local travel. Keyboarding required in approx. 80% - 100% of daily tasks Disclaimer: This information describes the general nature and level of work performed by employees in this job. The description is not designed to be a comprehensive inventory of duties, responsibilities, and qualifications required of employees in the job. Reasonable accommodation may be made to qualified disabled individuals for the performance of essential duties and responsibilities.

CTR Group is seeking a Assembler, Newport News, VA. Immediate openings and urgently hiring! What We Offer: Weekly Pay - you receive a paycheck every week Comprehensive Benefits Package Safety First! Summary• Follows production drawings, sample assemblies, and verbal instructions with general supervision.• Understands and applies established acceptable workmanship practices to all facets of electronic assembly.• Interprets and works from electromechanical schematics, drawings, work instructions, and bills of material.• Reads worksheets and wiring diagrams; selects components such as transistors, resistors, relays, capacitors, and integrated circuits.• Mounts assembled components on chassis panels requiring manual dexterity and the ability to work with simple hand tools.• Connects component lead wires to printed circuits and routes and connects wires between components.• Positions and aligns parts in specified relationships to each other using jigs, fixtures, or holding devices.• Uses hand and small power tools to place small components in boards, cables, and connectors.• May perform tasks such as potting, encapsulating, sanding, cleaning, epoxy bonding, curing, stamping, etching, impregnating, and color coding.• Performs hand soldering and may perform work under microscope.• Performs online go-no-go testing and inspection.• Troubleshoots and repairs defects of finished products.• Follows safety procedures and cleanliness requirements.• Records information on production records, logs, and report forms. Supervisory Responsibilities:This job has no supervisory responsibilities. Competencies:• Oral/Written Communication• Teamwork• Ethics and Integrity• Organization and Time Management• Professionalism• Quality Focus• Safety and Security• Adaptability• Dependability• Attendance and Punctuality About CTR Group: CTR Group operates in the staffing and recruitment industry, Nationwide for over 35 years. We provide full-service staffing support for various sectors including Marine Trades, Heavy Industrial, Light Industrial, Commercial, Technical, Professional, Aerospace and Aviation, and Energy. We offer a range of placement options such as Direct Hire, Contract Labor, Temporary & Temp to Hire. CTR Group takes pride in its high ratings across various platforms, reflecting our commitment to excellence and our dedication to providing quality staffing and employment services.CTR Group is an equal employment opportunity employer. Candidates are selected based on qualifications and defined requirements of the job, not on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin or any other protected status. Further, CTR Group encourages United States' Veterans and persons with disabilities to apply for positions for which they are qualified.

Amentum is seeking a Submarine Engineering Technician IV to join our Norfolk, VA team to support MARMC code 274. This role focuses on the submarine Towed Array Handling System (TAHS). **Essential Responsibilities** : + Provide technical assistance, industrial support, or both to evaluate, troubleshoot, test, repair, and provide technical oversight and guidance to correct equipment deficiencies of the TAHS equipment on submarines. + Provide technical oversight for towed array on-load/off-load evolutions as it relates to the Towed Array Handling System (TAHS). + Perform TB-16 stowage tube and guide tube inspections for TAHS variants. + Provide technical and logistical assistance via telephone, e-mail, chat, and naval message for both deployed and local submarines in matters associated with TAHS equipment. + Provide onboard maintenance training to the ship's force personnel during technical assistance visits to improve proficiency in the operation and maintenance of TAHS equipment towed systems. + Provide a written Technical Assistance Visit Report (TAVR) and TAVR worksheet data upon completion of FTA. + Provide onboard support for the towed systems' portion of TSRA, including the Pre/Post-Deployment Maintainability Assessment (PDMA). + Provide management and coordination support for Total Ship Readiness Plan (TSRP), planning and process improvement initiatives, activities, semi-annual TSRP conferences, and meetings. This includes preparation and development of briefs, presentations, on-site preparation and participation, and follow-up activities, including tracking and accomplishment of action items. + Provide inventory control and a periodic NAVSEA S&TE calibration report for NAVSEA special S&TE utilized to support MARMC and other RMCs' towed systems activities. + Experience with fabricating, procurement, repairing, refurbishing, maintaining, and calibrating special S&TE. + Knowledge of inspecting, maintaining, repairing, and refurbishing hydraulic filter rigs annually. + Knowledge of testing, distributing, repairing, and maintaining the improved Towed Array Power Supply Dummy Load boxes. + Provide onboard technical assistance for conducting ship checks and AIT/modernization. + Maintain and track towed systems S&TE for use during tech assists, inspections, assessments, and grooms. + Experience with fabricating, procuring, repairing, refurbishing, maintaining, calibrating, packaging, shipping, and inventorying fleet S&TE. Includes inboard, outboard, and inter-connecting cables, connectors, pins, fittings, molds, and materials. + Experience in developing, reviewing, and providing comments on engineering change proposals, data, documentation, and drawings for special S&TE. + Experience in performing the following: + Generate and submit Formal Work Package (FWP) IAW NAVSEA TS9090-310 and the JFMM to MARMC C274. + Procure all required material. + Draft Plan of Action and Milestones (POA&M) in Microsoft Project electronic format and deliver to MARMC C274. + Provide support for the AIT Government Lead with a SHIPALT walk-through and/or close out with the respective submarine. + Experience in performing surface refurbishment of Rim Drive Drum Dual Groove Pair to the tolerances (750-1000 micro inch range) noted on NAVSEA Dwg. No. 9818874. + Provide engineering and technical support for OA-9070 pinch roller assemblies either pier side or during a Selected Restricted Availability (SRA). Tasking can include installation, removal, inspection, cleaning, and testing. + Knowledge in performing PRA maintenance, inspection, and refurbishment IAW the latest revision and change of MS 5850-081-150 (LA Class) and MS 5950-081-122 (VA Class). Contractor shall have the capability to complete and ship within (7) business days of receipt. With structural, base metal repairs, add three (3) days to the complete and ship requirement for a total of ten (10) days after receipt. + Knowledge of procuring, fabricating, inspecting, packaging, shipping, inventorying, and maintaining items required to perform maintenance, inspection, and refurbishment. Items include compensator, PRA rollers, springs, roller arms, mounting brackets, frames, foundations, fasteners, parts, material, S&TE, and similar. + Provide engineering and technical support for OA-9070/B/BQQ series TBDD assemblies, either pier side or during an SRA. It can include installation, removal, inspection, cleaning, and testing. + Experience with performing TBDD maintenance, inspection, and refurbishment IAW the latest revision and change of MS 5850-081-219 (LA Class). Contractor shall have the capability to complete and ship within (7) business days of receipt. With structural, base metal repairs, add three (3) days to the complete and ship requirement for a total of ten (10) days after receipt. + Provide pre-refurbishment TBDD inspection report for Government review and approval of each TBDD refurbishment. + Knowledge in procuring, fabricating, inspecting, packaging, shipping, inventorying, and maintaining items required to perform maintenance, inspection, and refurbishment. Items include TBDD pulleys, belts, tensioner components, mounting brackets, frames, foundations, fasteners, parts, material, S&TE, and similar. **Minimum Requirements** : + Must have an Active Secret US Government Clearance. Note: US Citizenship is required to maintain an Active Secret Clearance. + Six (6) years full-time technical experience in the design, installation, test, and/or repair of mechanical/electrical/electronic or mechanical systems/equipment. + Must have experience with the following systems: + OA-9070 A/B/E Variants + OK 276 ( )/A/B/C/D/T Variants + OK-418 + OK-542 /A + OK-634 **Preferred Qualifications** : + Four (4) years full-time engineering experience in the operation, maintenance, installation, test, and/or repair of submarine mechanical and or electrical, and or electronic systems/equipment. + Experience in evaluating the material condition of ship systems and implementing corrective action Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .

Engineering Technician III (Job ID: 3286) Location: Norfolk, VA Remote Status: On-Site Job Id: 3286 # of Openings: 20 Engineering Technician III Purpose: * Valkyrie Enterprises has an immediate need for an Engineering Technician III who will be a key support to space modifications, installation, and sustainment of infrastructures. * This position is located in Norfolk, Va and supports surrounding shipyards. Job Description: * Responsible for the Life-Cycle of the shore-site training systems. * perform modifications as required including, but not limited to; space modifications, the installation and sustainment of infrastructures such as hardware, foundations, cabling (copper and fiber optic), connector installation, false decking and overhead, deck covering, IT Systems, electrical, heating, ventilation, air conditioning, and electronic cooling water piping. * Responsible for shipboard training systems to perform modifications as required including but not limited to system grooms and overhauls, support with equipment maintenance and training, troubleshooting, and equipment repair including hardware, software and cabling, and logistic support. * Generate and execute procedures in support of shore-site facility activations, upgrades, and repairs. * Read and follow schematics and maintaining assembly instructions associated with Government-built prototype equipment and development of schematics, drawings, and TDPs. * Perform the installation and initial verification of equipment and cables installed in the facility. * Maintain records (engineering or administrative) data such as tests, drawings, computer usage, Quality Assurance etc.; performs computations by substituting numbers in specified formulas; plot data and draw simple curves and graphs. * Follow established policies and procedures to ensure proper working order. * Assist in field or production activities such as data collection, equipment or machine design, testing, quality control and efficiency studies. Qualifications: * Must have a High school or equivalent and appropriate Trade School or related Armed Forces School and at least 7 years of related experience. * Must have experience in engineering studies and analysis of actual and/or proposed shore-site installations. * Must be able to perform facility visits to verify dimensions, interfaces, power availability, tolerances, and other installation factors. Desired Qualifications: * Current or recent experience supporting U.S. Naval aircraft carriers or other U.S. Naval vessels embedded Training Systems Security Requirements: * Must be eligible to obtain and maintain a DoD Secret Security Clearance to access public and private shipyards and Naval installations. * Must meet REAL ID requirements for base and travel access. Travel Requirements: * Occasional travel- 10% * If position requires travel by domestic flight or access to secure federal facilities/military bases, candidate must be able to obtain (by start of position) and maintain appropriate identification credentials, such as REAL ID. (More information regarding REAL ID can be found: *************************** ) Physical Requirements: * Remaining in a stationary position, often standing, or sitting for prolonged periods. * Moving about to accomplish tasks or moving from one worksite to another. * Communicating with others to exchange information and repeating motions that may include the wrists, hands and/or fingers. * May require climbing up/down ship ladders and enclosed spaces. * Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal. Valkyrie strictly adheres to a policy of equal employment opportunity. This policy is based on Valkyrie's commitment to hire and retain qualified employees consistent with position requirements; and to seek, employ, promote and treat all employees and applicants for employment without regard to race, color, religious creed, national origin, ancestry, citizenship status, pregnancy, childbirth, physical disability, mental disability, age, military status or protected veteran status, marital status, registered domestic partner or civil union status, gender (including sex stereotyping and gender identity or expression), medical condition, genetic information or sexual orientation or other protected characteristics. Please note: The annualized pay range referenced is a general guideline. Valkyrie Enterprises considers factors such as (but not limited to) the following when determining base pay: scope and responsibilities of the position, candidate's related work experience, education/training/certifications, key skills, internal peer equity/external market competitiveness, as well as other business considerations. Additionally, Valkyrie Enterprises provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid life and disability insurances, 401k with match, education reimbursement, as well as company paid holidays and paid time off (PTO). Pay Range: $25 - $32 per hour

Job Code **4493** \# of Openings **7** Apply Now (**************************************************** Requisition?org=GATEWAYVENT&cws=55&rid=4493) **Amee Bay, LLC,** a subsidiary of Three Saints Bay, LLC, and a Federal Government Contractor industry leader, is seeking an experienced **Senior Engineering Technician** to join our team in **Norfolk, VA.** **Position Responsibilities:** + Shipboard tag-out, WAF programs and applicable Naval procedures / instructions. + Knowledge of OSHA safety practices. + Read and interpret blueprints, sketches, written technical instructions and manuals. + Working knowledge **Position Requirements:** · US Citizenship. · Must be able to obtain and maintain active Secret Security Clearance and Base Access; Candidates currently possessing an Active Secret Clearance are preferred. · High School Diploma or · GED. With Military "A" or "C" school(s), completion of a vocational, maritime, or journeyman training program. · Display knowledge of maritime mechanical systems. · Possess understanding of shipboard mechanical machinery equipment and systems such as main propulsion machinery, auxiliary machinery and hydraulics. · Knowledge of mechanical systems components such as valves, bearings, gears, remote operators, couplings, system alignment, etc. · Ability to read and interpret blueprints, sketches, written technical instructions and manuals, make red-line drawings, and design recommendations. + Three (3) years' experience in the development and updating of engineering operational procedures and diagrams utilizing ISODRAW and Adept Editor software (or equivalent) to incorporate required changes into existing operational procedures and diagrams for in-service ships and generate new operational procedures and diagrams for new acquisition ships in SGML and CGM formats (or equivalent) and conversion to PDF. · Minimum of Six (6) years' experience including practical engineering experience which should include the operation, test, maintenance, and repair of naval ship Hull, Mechanical, Electrical, Electronic, Ordnance equipment and systems. · Pay is based on experience. · Valid U.S. Driver's License. · Must pass drug screening as a condition of employment. · Candidates must furnish their own hand tools required for this position. · _Candidates must be willing to travel, CONUS & OCONUS at times._ **Preferred skills:** · Ability to develop and update engineering operational procedures and diagrams utilizing _ISODRAW_ and _Adept Editor_ software (or equivalent) · _Prior military experience directly related to the position or prior experience in the Maritime Industry preferred._ · Knowledge of Shipboard Engineering Space Systems Engineering operational procedures (EOP), Engineering operational casualty control (EOCC), Master casualty response procedure (MCRP), Master emergency plant procedure (MEPP), &Other Operational Sequencing System. · Knowledge of Shipboard electrical and electronic systems. **Position located in Chesapeake, Virginia.** Apply online at: *************************************************** Requisition?org=GATEWAYVENT&cws=49&rid=4493 Hourly wage is $25.00 - 32.00 based on experience. VEVRAA Federal Contractor Three Saints Bay, LLC and its subsidiaries offer a team-oriented working environment and the opportunity to work with exceptional, dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international. We are an Equal Opportunity Employer. We invite resumes from all interested parties without regard to race, color, sex, sexual preference, religion, creed, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.

THOR Solutions is actively seeking a Mechanical Engineering Technician with expertise in Navy shipboard diesel engines to support the Naval Special Warfare Center Philadelphia Division (NSWC-PD) in Norfolk, VA. The Technician will provide full-time onsite contracted support to NSWCPD. This position is associated with an upcoming contract that THOR is pursuing, with an expected start in early January 2026. We are conducting preliminary, “contingent” hiring for roles associated with this contract. The work start is dependent upon THOR being awarded this contract. Typical Responsibilities: May include (but are not limited to) the following actions: Provide DRS support in the development and updating of Propulsion, Power and Diesel Engines Systems technical and ILS documentation. Technical and logistics documentation to be updated includes but is not limited to: Technical Manuals Personnel Qualification Standards (PQS) Depot Level Maintenance Standards (MS) Technical Repair Standards (TRS) Process Control Procedures Class Standard Work Templates PMS (MIPs & MRCs) EOSS APLs. Provide the technical support necessary to incorporate changes to this documentation resulting from feedbacks, advisories, technical bulletins, Technical Warrant Holder (TWH) guidance, hardware configuration changes resulting from alteration installations, and other situations that arise which require the updating of technical and logistics support documentation. Provide assistance with the development and tracking of DRS Plan of Action and Milestones (POAMs) for related Propulsion, Power and Diesel Engines Systems programs and projects Location: Primarily onsite at THOR local office in Norfolk, VA. Travel: Up to 25% travel anticipated, for 1-2 week durations, to CONUS and OCONUS locations including: Philadelphia, PA, Beloit, WI, Detroit, MI, Peoria, IL, Washington DC, Norfolk, VA, Mayport, FL, San Diego, CA, Everett, WA, Pearl Harbor, HI, Bahrain, Sasebo, Japan, Yokosuka, Japan, Singapore, and various Naval facilities and ship new construction yard facilities. Typical Physical Activity: Primarily desk/computer work in an office environment. May involve: repetitive motion. Periodic visits to waterfront/shipboard environments. May involve: traversing shipboard environments (e.g., confined spaces, ladders, hatches) or vision. Eligibility for a SECRET Security Clearance is Required: This position requires eligibility for a Secret security clearance, to be obtained after hire. Only U.S. citizens are eligible for a security clearance; therefore, only current U.S. citizens will be considered for this position. Required Knowledge, Skills, and Abilities: High School diploma, GED, or equivalent. At least ten (10) years of recent, relevant hands-on experience in the area of diesel propulsion and power generating systems. Four (4) years of experience with US Navy diesel engine applications, specifically FM-Pielstick, FMOP, Caterpillar, MTU and/or Isotta Fraschini. Three (3) years of experience supporting the US Navy DRS Program. To include experience with the following: Shipboard Automated Maintenance Manager (SAMM) Conducting DOCTOR diesel engine performance analyses (DEPA) Reviewing DOCTOR combustion analysis data and providing technical recommendations to correct out-of-parameter conditions. Ability to communicate effectively. Benefit Offerings: Along with competitive pay, THOR offers a comprehensive benefits package including: Paid Time Off (accrued) Paid Holidays 401(k) with employer match and traditional/Roth options Medical Insurance (3 plan options) + TRICARE Supplemental Coverage Dental Insurance (2 plan options) Vision Insurance Plan Healthcare and Dependent Care Flexible Spending Accounts Commuter/Transit Benefits Basic Life/AD&D, Short-Term and Long-Term Disability Insurance Supplemental Life Insurance Pet Benefits Legal Resources ID Theft Benefits Employee Assistant Plan and Work-Life Program Voluntary Leave Transfer Program Tuition Reimbursement Program Employee Referral Program Please be aware that many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. Founded in 2009, THOR Solutions, LLC (THOR) is a rapidly growing Center for Veteran's Excellence (CVE) verified Service-Disabled Veteran-Owned Small Business (SDVOSB) providing mission critical support across the Department of Defense, Department of Homeland Security, federal civilian agencies and commercial maritime industry, worldwide. THOR provides innovative and tailored expertise in multidisciplinary engineering, project and program management, business and financial management, technical support, integrated logistics support, training support, fleet support, corporate operations support, assessments and studies. THOR is privileged to deliver service solutions to the nation's most complex military, public sector and industry challenges. THOR is proud to be an Equal Opportunity Employer, including veterans and individuals with disabilities. THOR considers all qualified applicants for employment without regard to legally protected characteristics. This policy applies to all terms and conditions of employment. If you are an individual with a disability and would like to request a reasonable accommodation as part the employment selection process, please contact us at *************************** or **************.

About Us When you work at Chugach Government Solutions (CGS), you join a proud legacy of supporting missions while sustaining culture. The federal division of Chugach Alaska Corporation, CGS has been supporting critical missions as a government contractor for over 25 years. Our focus is to support facility maintenance, IT/technical services, construction and education. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields - each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders. At CGS, empowering employees is a part of our core, and that focus is one of the ways we build and foster high-performing teams. We empower our employees through competitive compensation and benefits package, professional growth opportunities, truthful communication, and more! If you are looking for an opportunity to serve something bigger than yourself; if you want your day job to be one that creates meaningful value; if you are looking for an environment that highly values employees and respects individual differences - then Chugach Government Solutions may be the right fit for you! Job Overview The role of the Engineering Technician III (Shipboard) is to provide day-to-day Shipboard installation support and supervision for a variety of RF, audio, video, navigation, and communication system installations. This position reports to the Installation Supervisor. Responsibilities Essential Duties & Job Functions: * Working with SPAWAR ISEAs and other technical codes, program/project managers, and SMEs, the Engineering Technician III (Shipboard) will assist with the Shipboard installation, planning, testing, and integration of complex audio visual displays, various communication and electronic warfare systems, related ancillary and computer based systems onboard naval ships and command centers worldwide. Job Requirements Mandatory: * Must be a U.S. citizen. * Must have or be able to obtain a minimum security clearance of secret. * Must have a minimum of 9 years shipboard installation/integration experience, * Must have High School diploma. * Must be willing to travel up to 75% CONUS/OCONUS. * Must be willing to work extended hours including weekends and holidays. * Must have a valid driver's license and reliable transportation. Reasonable Accommodation: It is CGS, LLC business philosophy and practice to provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. Equal Employment Opportunity: Chugach is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender, sexual orientation, gender identity or expression, age, pregnancy, disability, genetic factors, protected veteran status or other characteristics protected by law.

If you love engaging in manual projects supporting the U.S Navy and our U.S Naval Ships, Serco has a great opportunity for you! Serco is hiring a Mechanical Assembler (Advanced-Level) to be part of a dynamic team supporting our US. Navy with equipment, and C5ISR system installations located in the beautiful surrounds of Norfolk, Virginia. Serco supports our US Naval Ships with successful and safe work by providing cabling, equipment, and C5ISR system installations for our Military. You will join an amazing team to fabricate, and assemble various electromechanical and electronic assemblies by applying appropriate safety techniques You will also play a critical role in ensuring that successful and safe work is performed on-board U.S. Naval Ships and our Military installations, which is vital to our Mission to protect and serve our Military. In this role, you will: Follow blueprints, guidelines, and/or diagrams to fabricate and assemble various electromechanical and electronic assemblies. Perform work with standard concepts, practices, and procedures within field. Rely on experience and judgment to plan and accomplish goals. Work on-board U.S. Naval Ships and military installations in an area that is somewhat uncomfortable due to drafts, noise, temperature variation and the like and with equipment where carelessness would probably result in minor cuts, bruises, muscle strains, serious injury, or death. Qualifications To be successful in these roles, you will have: The ability to obtain and maintain a secret clearance. High School Diploma or GED. At least 5 years shipboard experience. The ability to obtain and gain access to shipyards (NAVSTA & DBIDS), undergo a background investigation, and pass a drug screening. The ability to obtain a Firewatch and Cable Installer certification. A combination of experience in the following areas: Ability to bolt/unbolt cableways, deck plates & equipment Drill holes (with supervision) Operate light machinery/ equipment (with training) Position, join, align, wrap & seal pipe & conduit sections Ability to follow directions of senior employees Carry equipment & clean spaces Remove lagging & paint The ability to Identify safety concerns in immediate work environment Sound technical knowledge base of discipline's standard concepts, principles, and techniques. The ability to work in high heat spaces, climb shipyard dry dock stairs/ladders, work in kneeling position for layout of cable runs under false decking, lift up to 50 pounds with 80% of work requiring carrying, pushing, and/or pulling up to 40 pounds for majority of shift while being in a standing, crouching, or walking position. The ability and bewilling to travel up to 10% to various work sites. The ability to work independently, in a team environment and under stressful conditions with tight deadlines. The ability to work onsite in Chesapeake, VA. Additional desired experience and skills: An active DoD Secret Clearance An OSHA Certification If you are interested in supporting and working with our Systems Integration and Installation Business and joining a passionate Serco team, then submit your application now for immediate consideration. It only takes a few minutes and could change your career! Military Veterans and Spouses encouraged to apply! Company Overview Serco Inc. (Serco) is the Americas division of Serco Group, plc. In North America, Serco's 9,000+ employees strive to make an impact every day across 100+ sites in the areas of Defense, Citizen Services, and Transportation. We help our clients deliver vital services more efficiently while increasing the satisfaction of their end customers. Serco serves every branch of the U.S. military, numerous U.S. Federal civilian agencies, the Intelligence Community, the Canadian government, state, provincial and local governments, and commercial clients. While your place may look a little different depending on your role, we know you will find yours here. Wherever you work and whatever you do, we invite you to discover your place in our world. Serco is a place you can count on and where you can make an impact because every contribution matters. To review Serco benefits please visit: ************************************************************ If you require an accommodation with the application process please email: ******************** or call the HR Service Desk at ************, option 1. Please note, due to EEOC/OFCCP compliance, Serco is unable to accept resumes by email. Candidates may be asked to present proof of identify during the selection process. If requested, this will require presentation of a government-issued I.D. (with photo) with name and address that match the information entered on the application. Serco will not take possession of or retain/store the information provided as proof of identity. For more information on how Serco uses your information, please see our Applicant Privacy Policy and Notice. Serco does not accept unsolicited resumes through or from search firms or staffing agencies without being a contracted approved vendor. All unsolicited resumes will be considered the property of Serco and will not be obligated to pay a placement or contract fee. If you are interested in becoming an approved vendor at Serco, please email *********************. Serco is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics. Pay Transparency Our Total Rewards package includes competitive pay, performance-based incentives, and benefits that promote well-being and work-life balance-so you can thrive both professionally and personally. Eligible employees also gain access to a wide range of benefits from comprehensive health coverage and health savings accounts to retirement plans, life and disability insurance, and time-off programs that support work-life balance. Program availability may vary based on factors such as contract type, location, hire date, and applicable collective bargaining agreements. Salary range: The range for this position can be found at the top of the posting. This range is provided as a general guideline and represents a good faith estimate across all experience levels. Actual base salary will be determined by a variety of factors, including but not limited to, the scope of the role, relevant experience, job-related knowledge, education and training, key skills, and geographic market considerations. For roles available in multiple states, the range may vary to reflect differences in local labor markets. In addition to base salary, eligible positions may include other forms of compensation such as annual bonuses or long-term incentive opportunities. Benefits HIGHLIGHTS - Comprehensible Benefits for Full-time Employees (Part-time members receive a customized package tailored to their role). Medical, dental, and vision insurance Robust vacation and sick leave benefits, and flexible work arrangements where permitted by role or contract 401(k) plan that includes employer matching funds Tuition reimbursement program Life insurance and disability coverage Optional coverages you can buy, including pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection Birth, adoption, parental leave benefits Employee Assistance Plan that includes counseling conditions Specific benefits are dependent upon the specific contract as well as whether the position is covered by a collective bargaining agreement or the Service Contract Act. To review all Serco benefits please visit: ****************************************** Serco complies with all applicable state and local leave laws, including providing time off under the Colorado Healthy Families and Workplaces Act for eligible Colorado residents, in alignment with our policies and benefit plans. The application window for this position is for no more than 60 days. We encourage candidates to apply promptly after the posting date, as the position may close earlier if filled or if the application volume exceeds expectations. Please submit applications exclusively through Serco's external (or internal) career site. This is a U.S.-based role. If an applicant has any concerns with job posting compliance, please send an email to: ********************.

Engineering Tech I The purpose of this position is to design and prepare timely, safe and cost-effective natural gas infrastructure improvements including system replacements, relocations due to state, municipal, and private entity construction conflicts, system reinforcements, and system expansions for Virginia Natural Gas. Designs include applicable CAD drawings, permits, and cost estimates for system improvements which may include bridge attachments, railroad crossings and directional bore operations. The incumbent also coordinates customers & requirements with the various departments and other prevailing authorities. Position will reside at the Virginia Natural Gas corporate headquarters in Virginia Beach, VA. Functional Expertise: + Provide quality control of geospatial data and mapping products + Researches facility records in GIS and project as-builts + Draft city, state and railroad right-of-way permits and traffic control plans as required. Business Acumen: + Analyze construction proposals for DOT, municipal, and private projects for conflicts with existing gas utilities and propose recommendations to resolve conflicts + Develop timely and accurate cost estimates for construction projects, new gas main installations, plastic and steel main replacements, reinforcements and other system support projects as required Engagement: + Collaborates with engineers, construction, and operations to produce effective drawings + Collaborates on facility relocations with outside parties including county, municipal and state government representatives, road contractors and developers + Meet and negotiate with city and state officials, engineers, and construction contractors to resolve conflicts in a timely manner and relay Company policy, procedure, and other information relative to the gas industry + Influence customer satisfaction by responding to customer needs, keeping customers informed and ensuring work is scheduled in an effective manner Driving Results: + Create construction designs using MicroStation, AutoCAD, GIS and other applications + Monitors projects to ensure on-time delivery of plans to state, county and municipal authorities + Create a project AFE for design and prepare internal documents including ARM BCA/PWR + Ensure that compliance with all engineering principles, gas operating standards, local code, state and federal rules, regulations, mandates and statutes is maintained by preparing and/or revising designs as necessary for all gas facilities installed Education and Experience: Required: + BA/BS year degree with 3 years work related experience + Knowledge of natural gas distribution system facilities Preferred: * Some level of GIS, engineering, or technical education or experience Or Equivalent academic education and experience Skills: Required: + Valid driver's license + Drafting ability - advanced proficiency + One or more industry standard CAD Packages (MicroStation, AutoCAD, TurboCAD etc) - advanced proficiency + Work Prioritization - advanced proficiency + Ability to read, interpret and apply engineering and architectural plans - intermediate proficiency + Excellent interpersonal communication skills + Mathematical aptitude - intermediate proficiency + Proficiency with variety of GIS concepts, practices, and procedures + MS Excel, Word and PowerPoint - intermediate proficiency + ArcGIS - basic proficiency + ARM - basic proficiency Certifications/Licenses: Preferred: * GIS Certification Working Conditions/Physical Requirements: + The incumbent works in an office environment with a hybrid schedule, 4 days per week with 1 remote day from home, and subject to change as business needs dictate. + The incumbent may/will be exposed to varying outdoor weather conditions. + The incumbent may/will be exposed to construction related activities + This position occasionally requires prolonged standing or walking. + This position occasionally requires the incumbent to reach above shoulder-level. + This position occasionally requires the incumbent to bend, kneel, crouch, or crawl. + This position requires the ability to lift up to 25 pounds. + Local travel. + Keyboarding required in approx. 80% - 100% of daily tasks Disclaimer: This information describes the general nature and level of work performed by employees in this job. The description is not designed to be a comprehensive inventory of duties, responsibilities, and qualifications required of employees in the job. Reasonable accommodation may be made to qualified disabled individuals for the performance of essential duties and responsibilities. About Southern Company Gas Southern Company Gas is a wholly owned subsidiary of Atlanta-based Southern Company (NYSE:SO), America's premier energy company. Southern Company Gas serves approximately 4.2 million natural gas utility customers through its regulated distribution companies in four states and approximately 600,000 retail customers through its companies that market natural gas. Other nonutility businesses include investments in interstate pipelines and ownership and operation of natural gas storage facilities. For more information, visit southerncompanygas.com . Southern Company (NYSE: SO ) is a leading energy provider serving 9 million customers across the Southeast and beyond through its family of companies. Providing clean, safe, reliable and affordable energy with excellent service is our mission. The company has electric operating companies in three states, natural gas distribution companies in four states, a competitive generation company, a leading distributed energy solutions provider with national capabilities, a fiber optics network and telecommunications services. Through an industry-leading commitment to innovation, resilience and sustainability, we are taking action to meet customers' and communities' needs while advancing our goal of net-zero greenhouse gas emissions by 2050. Our uncompromising values ensure we put the needs of those we serve at the center of everything we do and are the key to our sustained success. We are transforming energy into economic, environmental and social progress for tomorrow. Our corporate culture has been recognized by a variety of organizations, earning the company awards and recognitions that reflect Our Values and dedication to service. To learn more, visit *********************** . Southern Company invests in the well-being of its employees and their families through a comprehensive total rewards strategy that includes competitive base salary, annual incentive awards for eligible employees and health, welfare and retirement benefits designed to support physical, financial, and emotional/social well-being. This position may also be eligible for additional compensation, such as an incentive program, with the amount of any bonus/awards subject to the terms and conditions of the applicable incentive plan(s). A summary of the benefits offered for this position can be found here **************************************************** . Additional and specific details about total compensation and benefits will also be provided during the hiring process. Southern Company is an equal opportunity employer where an applicant's qualifications are considered without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other basis prohibited by law. Job Identification: 16192 Job Category: Engineering Job Schedule: Full time Company: Virginia Natural Gas

CTR Group is seeking a Assembler, Suffolk, VA. Immediate openings and urgently hiring! What We Offer: Weekly Pay - you receive a paycheck every week Comprehensive Benefits Package Safety First! Key Responsibilities Verify that the sonic welder air pressure is sufficient prior to operation. Weld Velcro securely to fetal monitor belts. Inspect welded Velcro strips to ensure a complete and proper seal. Roll and package fetal monitor belts accurately and efficiently. Maintain accountability for product accuracy and quantities pulled. Consistently work toward increasing production levels in a cost-efficient manner. Contribute positively to team goals and overall production success. Accurately record time and attendance using correct codes as directed. Meet established productivity standards and complete work in a timely manner. Observe safety and security procedures and report potentially unsafe conditions. Maintain a clean, organized, and safe work area. Adhere to all company policies and procedures outlined in the Employee Handbook and Policies and Procedures Manual, including safety, security, and quality standards. Provide high-quality customer service to internal personnel, customers, and vendors. Promptly respond to internal and external inquiries. Work overtime as needed to meet production demands. Follow written work instructions and procedures. Perform additional duties and special projects as assigned by the Production Supervisor or Manager. Minimum Qualifications Education and Experience High school diploma or GED required. One to three months of related experience and/or training preferred, or an equivalent combination of education and experience. Knowledge, Skills, and Ability Ability to read, write, speak, and understand English. Ability to meet productivity standards and complete tasks efficiently. Strong awareness of safety and security procedures. Ability to listen, seek clarification, and respond appropriately to questions. Effective verbal communication skills in one-on-one situations. Ability to read and comprehend simple instructions, correspondence, and memos. Ability to write simple correspondence. Basic math skills, including addition, subtraction, multiplication, and division using whole numbers, fractions, and decimals. Ability to apply common-sense understanding to carry out detailed but uncomplicated instructions. Ability to solve problems involving a limited number of concrete variables in standardized situations. Physical Requirements Fingering: Frequent picking, pinching, and pressing, primarily using fingers. Repetitive Motion: Repetitive wrist, hand, and finger movements. Visual Acuity: Close visual inspection for detecting small defects and performing assembly or fabrication tasks. About CTR Group: CTR Group operates in the staffing and recruitment industry, Nationwide for over 35 years. We provide full-service staffing support for various sectors including Marine Trades, Heavy Industrial, Light Industrial, Commercial, Technical, Professional, Aerospace and Aviation, and Energy. We offer a range of placement options such as Direct Hire, Contract Labor, Temporary & Temp to Hire. CTR Group takes pride in its high ratings across various platforms, reflecting our commitment to excellence and our dedication to providing quality staffing and employment services.CTR Group is an equal employment opportunity employer. Candidates are selected based on qualifications and defined requirements of the job, not on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin or any other protected status. Further, CTR Group encourages United States' Veterans and persons with disabilities to apply for positions for which they are qualified.

Engineering Technician I (Job ID: 3285) Location: Norfolk, VA Remote Status: On-Site Job Id: 3285 # of Openings: 30 Engineering Technician I Purpose: * Valkyrie Enterprises has an immediate need for an Engineering Technician I who will be a key support to space modifications, installation, and sustainment of infrastructures. * This position is located in Norfolk, VA and surrounding shipyards. Job Description: * Facilitates Removal, disposal and replacement of metallic sunshields, scuppers and troughs with composite variants IAW NAVSEA Technical Publication S9078-AC-GYD-010 and "ILS Summary of Composite Components * Responsible for the Lifecycle of the shore-site training systems. * Perform modifications as required including, but not limited to; space modifications, the installation and sustainment of infrastructures such as hardware, foundations, cabling (copper and fiber optic), connector installation, false decking and overhead, deck covering, IT Systems, electrical, heating, ventilation, air conditioning, and electronic cooling water piping. * Responsible for shipboard training systems to perform modifications as required including but not limited to system grooms and overhauls, support with equipment maintenance and training, troubleshooting, and equipment repair including hardware, software and cabling, and logistic support. * Generate and execute procedures in support of shore-site facility activations, upgrades, and repairs. * Read and follow schematics and maintaining assembly instructions associated with Government-built prototype equipment and development of schematics, drawings, and TDPs. * Perform the installation and initial verification of equipment and cables installed in the facility. * Maintain records (engineering or administrative) data such as tests, drawings, computer usage, Quality Assurance etc.; performs computations by substituting numbers in specified formulas; plot data and draw simple curves and graphs. * Follow established policies and procedures to ensure proper working order. * Assist in field or production activities such as data collection, equipment or machine design, testing, quality control and efficiency studies. Qualifications: * Must have a High School or equivalent and appropriate Trade School or related Armed Forces School and at least 3 years of related experience. * Must have experience in engineering studies and analysis of actual and/or proposed shore-site installations. * Must be able to perform facility visits to verify dimensions, interfaces, power availability, tolerances, and other installation factors. Desired Qualifications: * Current or recent experience supporting U.S. Naval aircraft carriers or other U.S. Naval vessels embedded Training Systems Security Requirements: * Must be eligible to obtain and maintain a DoD Secret Security Clearance to access public and private shipyards and Naval installations. * Must meet REAL ID requirements for base and travel access. Travel Requirements: * Occasional travel- 10% * If position requires travel by domestic flight or access to secure federal facilities/military bases, candidate must be able to obtain (by start of position) and maintain appropriate identification credentials, such as REAL ID. (More information regarding REAL ID can be found: *************************** ) Physical Requirements: * Remaining in a stationary position, often standing, or sitting for prolonged periods. * Moving about to accomplish tasks or moving from one worksite to another. * Communicating with others to exchange information and repeating motions that may include the wrists, hands and/or fingers. * May require climbing up/down ship ladders and enclosed spaces. * Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal. Valkyrie Enterprises, LLC. is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Please note: The annualized pay range referenced is a general guideline. Valkyrie Enterprises considers factors such as (but not limited to) the following when determining base pay: scope and responsibilities of the position, candidate's related work experience, education/training/certifications, key skills, internal peer equity/external market competitiveness, as well as other business considerations. Additionally, Valkyrie Enterprises provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid life and disability insurances, 401k with match, education reimbursement, as well as company paid holidays and paid time off (PTO). Pay Range: $20 - $25 per hour

Job Description THOR Solutions is actively seeking a Mechanical Engineering Technician with expertise in Navy shipboard diesel engines to support the Naval Special Warfare Center Philadelphia Division (NSWC-PD) in Norfolk, VA. The Technician will provide full-time onsite contracted support to NSWCPD. This position is associated with an upcoming contract that THOR is pursuing, with an expected start in early January 2026. We are conducting preliminary, “contingent” hiring for roles associated with this contract. The work start is dependent upon THOR being awarded this contract. Typical Responsibilities: May include (but are not limited to) the following actions: Provide DRS support in the development and updating of Propulsion, Power and Diesel Engines Systems technical and ILS documentation. Technical and logistics documentation to be updated includes but is not limited to: Technical Manuals Personnel Qualification Standards (PQS) Depot Level Maintenance Standards (MS) Technical Repair Standards (TRS) Process Control Procedures Class Standard Work Templates PMS (MIPs & MRCs) EOSS APLs. Provide the technical support necessary to incorporate changes to this documentation resulting from feedbacks, advisories, technical bulletins, Technical Warrant Holder (TWH) guidance, hardware configuration changes resulting from alteration installations, and other situations that arise which require the updating of technical and logistics support documentation. Provide assistance with the development and tracking of DRS Plan of Action and Milestones (POAMs) for related Propulsion, Power and Diesel Engines Systems programs and projects Location: Primarily onsite at THOR local office in Norfolk, VA. Travel: Up to 25% travel anticipated, for 1-2 week durations, to CONUS and OCONUS locations including: Philadelphia, PA, Beloit, WI, Detroit, MI, Peoria, IL, Washington DC, Norfolk, VA, Mayport, FL, San Diego, CA, Everett, WA, Pearl Harbor, HI, Bahrain, Sasebo, Japan, Yokosuka, Japan, Singapore, and various Naval facilities and ship new construction yard facilities. Typical Physical Activity: Primarily desk/computer work in an office environment. May involve: repetitive motion. Periodic visits to waterfront/shipboard environments. May involve: traversing shipboard environments (e.g., confined spaces, ladders, hatches) or vision. Eligibility for a SECRET Security Clearance is Required: This position requires eligibility for a Secret security clearance, to be obtained after hire. Only U.S. citizens are eligible for a security clearance; therefore, only current U.S. citizens will be considered for this position. Required Knowledge, Skills, and Abilities: High School diploma, GED, or equivalent. At least ten (10) years of recent, relevant hands-on experience in the area of diesel propulsion and power generating systems. Four (4) years of experience with US Navy diesel engine applications, specifically FM-Pielstick, FMOP, Caterpillar, MTU and/or Isotta Fraschini. Three (3) years of experience supporting the US Navy DRS Program. To include experience with the following: Shipboard Automated Maintenance Manager (SAMM) Conducting DOCTOR diesel engine performance analyses (DEPA) Reviewing DOCTOR combustion analysis data and providing technical recommendations to correct out-of-parameter conditions. Ability to communicate effectively. Benefit Offerings: Along with competitive pay, THOR offers a comprehensive benefits package including: Paid Time Off (accrued) Paid Holidays 401(k) with employer match and traditional/Roth options Medical Insurance (3 plan options) + TRICARE Supplemental Coverage Dental Insurance (2 plan options) Vision Insurance Plan Healthcare and Dependent Care Flexible Spending Accounts Commuter/Transit Benefits Basic Life/AD&D, Short-Term and Long-Term Disability Insurance Supplemental Life Insurance Pet Benefits Legal Resources ID Theft Benefits Employee Assistant Plan and Work-Life Program Voluntary Leave Transfer Program Tuition Reimbursement Program Employee Referral Program Please be aware that many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. Founded in 2009, THOR Solutions, LLC (THOR) is a rapidly growing Center for Veteran's Excellence (CVE) verified Service-Disabled Veteran-Owned Small Business (SDVOSB) providing mission critical support across the Department of Defense, Department of Homeland Security, federal civilian agencies and commercial maritime industry, worldwide. THOR provides innovative and tailored expertise in multidisciplinary engineering, project and program management, business and financial management, technical support, integrated logistics support, training support, fleet support, corporate operations support, assessments and studies. THOR is privileged to deliver service solutions to the nation's most complex military, public sector and industry challenges. THOR is proud to be an Equal Opportunity Employer, including veterans and individuals with disabilities. THOR considers all qualified applicants for employment without regard to legally protected characteristics. This policy applies to all terms and conditions of employment. If you are an individual with a disability and would like to request a reasonable accommodation as part the employment selection process, please contact us at *************************** or **************. Powered by JazzHR VBFzUX8hYL

About Us When you work at Chugach Government Solutions (CGS), you join a proud legacy of supporting missions while sustaining culture. The federal division of Chugach Alaska Corporation, CGS has been supporting critical missions as a government contractor for over 25 years. Our focus is to support facility maintenance, IT/technical services, construction and education. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields - each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders. At CGS, empowering employees is a part of our core, and that focus is one of the ways we build and foster high-performing teams. We empower our employees through competitive compensation and benefits package, professional growth opportunities, truthful communication, and more! If you are looking for an opportunity to serve something bigger than yourself; if you want your day job to be one that creates meaningful value; if you are looking for an environment that highly values employees and respects individual differences - then Chugach Government Solutions may be the right fit for you! Job Overview The role of the Engineering Technician II (Shipboard) is to provide day-to-day Shipboard installation support for a variety of RF, audio, video, navigation, and communication system installations. This position reports to the Installation Supervisor. Responsibilities Essential Duties & Job Functions: * Working with SPAWAR ISEAs and other technical codes, program/project managers, and SMEs, the Engineering Technician II (Shipboard) will assist with the Shipboard installation of complex audio-visual displays, various communication and electronic warfare systems, related ancillary and computer-based systems onboard naval ships and command centers worldwide. Job Requirements Mandatory: * Must be a U.S. citizen. * Must have or be able to obtain a minimum security clearance of secret. * Must have a minimum of 6 years shipboard installation/integration experience. * Must have High School diploma. * Must be willing to travel up to 75% CONUS/OCONUS. * Must be willing to work extended hours including weekends and holidays. * Must have a valid driver's license and reliable transportation. Reasonable Accommodation: It is CGS, LLC business philosophy and practice to provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. Equal Employment Opportunity: Chugach is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender, sexual orientation, gender identity or expression, age, pregnancy, disability, genetic factors, protected veteran status or other characteristics protected by law.

About Us When you work at Chugach Government Solutions (CGS), you join a proud legacy of supporting missions while sustaining culture. The federal division of Chugach Alaska Corporation, CGS has been supporting critical missions as a government contractor for over 25 years. Our focus is to support facility maintenance, IT/technical services, construction and education. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields - each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders. At CGS, empowering employees is a part of our core, and that focus is one of the ways we build and foster high-performing teams. We empower our employees through competitive compensation and benefits package, professional growth opportunities, truthful communication, and more! If you are looking for an opportunity to serve something bigger than yourself; if you want your day job to be one that creates meaningful value; if you are looking for an environment that highly values employees and respects individual differences - then Chugach Government Solutions may be the right fit for you! Job Overview The role of the Engineering Technician I (Shipboard) is to provide day-to-day Shipboard installation support for a variety of RF, audio, video, navigation, and communication system installations. This position reports to the Installation Supervisor. Work Model: Onsite Responsibilities Essential Duties & Job Functions: * Working with SPAWAR ISEAs and other technical codes, program/project managers, and SMEs, the Engineering Technician I (Shipboard) will assist with the Shipboard installation and integration of complex audio/visual displays, various communication and electronic warfare systems, related ancillary and computer-based systems onboard naval ships and command centers worldwide. Accountable For: * We expect this employee to have experience in and be familiar with work being performed in or around industrial environments such as shipyards and Naval/Coast Guard bases and piers. As well as various and subcontractor Government sites. Job Requirements Mandatory: * Must be a U.S. citizen. * Must have or be able to obtain a minimum Secret security clearance. * Must have a minimum of 3 years of Shipboard installation/integration experience. * Must have a High School diploma. * Must be willing to travel up to 75% CONUS/OCONUS. * Must be willing to work extended hours, including weekends and holidays. * Must have a valid driver's license with an acceptable driving record upon request. * Must be able to successfully pass a pre-employment background check and pre-hire drug test. Working Conditions: * This is a full-time position in support of the Chugach integration and installation tasking team lead. The work may be performed at (Location TBD), industrial areas to include; shipyard, Navy/Coast Guard bases, shipboard and shore site locations. * Work is performed inside industrial environments and is subject to working around exposures to hazards that may cause bodily harm, cuts, bruises, burns, etc. * Work may also be performed outside, even during inclement weather. * Work may be performed at heights (aloft) where fall protection is required. * Work may be performed, including welding and cutting of metal. * Work may be performed off a ladder. Physical Requirements: * Ability to lift 45 lbs., climb vertical ladders, operate, and work around heavy machinery. * Work at heights (aloft). * Operate power tools safely. * Carry equipment and machinery around ships. * Ability to stand and walk most of the shift. * Kneel and crawl at the work site. * Crouch through void openings. Reasonable Accommodation: CGS will provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Chugach Government Solutions or any of its subsidiaries, please email ******************. Equal Employment Opportunity: Chugach is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender, sexual orientation, gender identity or expression, age, pregnancy, disability, genetic factors, protected veteran status or other characteristics protected by law.