Post job

Assembly technician jobs in Saint Petersburg, FL

- 288 jobs
All
Assembly Technician
Assembler
Engineering Technician
Production Technician
Mechanical Assembler
Senior Assembler Technician
Manufacturing Assembler
Machines Technician
Assembly Associate
Senior Assembler
Cable Assembler
  • Engineer Tech III

    Marriott International, Inc. 4.6company rating

    Assembly technician job in Tampa, FL

    Additional InformationHVAC experience, Electrical, Pluming, Hotel experience preferred Job Number25199215 Job CategoryEngineering & Facilities LocationTampa Marriott Water Street, 505 Water Street, Tampa, Florida, United States, 33602VIEW ON MAP ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day's activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests' service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver's License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. Marriott Hotels strive to elevate the art of hospitality, innovating at every opportunity while keeping the comfort of the oh-so-familiar all around the globe. As a host with Marriott Hotels, you will help keep the promise of “Wonderful Hospitality. Always.” by delivering thoughtful, heartfelt, forward-thinking service that upholds and builds upon this living legacy. With the name that's synonymous with hospitality the world over, we are proud to welcome you to explore a career with Marriott Hotels. In joining Marriott Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you. JW Marriott is part of Marriott International's luxury portfolio and consists of more than 100 beautiful properties in gateway cities and distinctive resort locations around the world. JW believes our associates come first. Because if you're happy, our guests will be happy. JW Marriott associates are confident, innovative, genuine, intuitive, and carry on the legacy of the brand's namesake and company founder, J.Willard Marriott. Our hotels offer a work experience unlike any other, where you'll be part of a community and enjoy true camaraderie with a diverse group of co-workers. JW creates opportunities for training, development, recognition and most importantly, a place where you can pursue your passions in a luxury environment with a focus on holistic well-being. Treating guests exceptionally starts with the way we take care of our associates. That's The JW Treatment™. In joining JW Marriott, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.
    $42k-77k yearly est. 5d ago
  • Assembler

    Aerosonic 4.2company rating

    Assembly technician job in Clearwater, FL

    Founded in 1953, Aerosonic has grown to be a leader in aviation instrumentation and avionics equipment - including air data systems, standby displays, digital and mechanical standby instruments, sensors and probes. Our customers include the major manufacturers of today's civil, military and business fixed wing and rotorcraft platforms as well as all branches of the US military forces. We are currently seeking an on-site Assembler for our Clearwater, FL facility. The right candidate will perform a variety of operations to assemble probes, sensors, booms, and other products used on and in aircraft. Assemblies include parts from sheet metal, wiring, and other components. Job Summary Following manufacturing instructions, diagrams and drawings, as well as, verbal instruction using a basic array of hand tools, including wire strippers, crimpers, torque wrenches, multi-meters, microscopes, soldering, and/or brazing equipment Disassemble, modify, rework, reassemble, and test prototype and production released assemblies and subassemblies according to instructions and specifications Variety of assembly operations on complex units or sub-units of precision production parts and components involving precision fittings and tolerances Assembly of tools according to their specifications and instructions including using test instruments for calibration and advanced adjustments Identify defective items and handle them according to established procedures Maintain equipment in good condition and check for calibration due dates Report on issues, malfunction, defective part, or defective equipment Test finished products for defects Perform in-process visual inspections, dimensional inspections and cosmetic final clean up Education/Previous Experience High school diploma or equivalent education 0-2 years of work experience in a manufacturing environment This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a US person as: any individual who is granted U.S. citizenship; or. any individual who is granted U.S. permanent residence ("Green Card" holder); or. any individual who is granted status as a "protected person" under 8 U.S.C Aerosonic is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center as a result of your disability.
    $23k-31k yearly est. 60d+ ago
  • Production Tech/Assembly Tech

    J l Marine Systems Inc. 4.4company rating

    Assembly technician job in Tampa, FL

    Requirements Work Schedule & Environment: Monday - Friday, 7:00 AM - 4:00 PM (One-hour lunch break) Work Setting: Warehouse/production environment with moderate to loud noise levels (forklifts, tools, etc.) Physical Requirements: ? Ability to stand, walk, and work with your hands for extended periods ? Lift and move up to 50 lbs ? Work near moving mechanical parts and exposure to industrial chemicals (safety measures in place) ? Reasonable accommodations available for individuals with disabilities
    $31k-36k yearly est. 60d+ ago
  • Solder Rework Assembler - 2nd Shift

    The Structures Company, LLC 4.1company rating

    Assembly technician job in Oldsmar, FL

    JOB TITLE: Solder Rework Assembler - 2nd Shift PAY RATE: $26-29/hour We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client. Job Details: Job Type: Contract (12 months with potential for extension) Shift: 2nd Industry: Aerospace / Defense / Aviation Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority access via Tier 1 supplier Openings Nationwide: Thousands of opportunities across the U.S. Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Summary: Perform high-mix, low-volume SMT and through-hole assembly on complex PCBs. Remove, replace, and repair bottom-terminated components (QFNs, BGAs, LGAs) using hot-air pencils, hot plates, and rework tools. Conduct precise reflow, pre-heat, and cooling cycles per component-specific thermal profiles. Operate and maintain X-ray inspection equipment to verify solder joint integrity on hidden pads. Interpret engineering drawings, work orders, and BOMs to ensure accurate component placement. Perform in-process quality checks (visual, AOI, X-ray) and document results per quality standards. Troubleshoot solder defects (tombstoning, voids, bridges) and implement corrective actions. Maintain an ESD-controlled environment and follow all safety and compliance protocols. Contribute to continuous improvement initiatives by suggesting tooling or process enhancements. Work under a microscope for extended periods during inspection and rework. Requirements: High school diploma or GED Minimum 6 years of hands-on SMT and through-hole solder assembly/rework experience; aerospace, defense, or high-reliability electronics experience preferred. Strong proficiency in X-ray inspection, rework tools, and thermal profile management. Skilled in reading engineering drawings, BOMs, and work orders. Excellent troubleshooting ability and keen attention to detail. Must be able to read and write in English. Must pass a medical exam as outlined in the supplier guide. Must be a U.S. Citizen (as defined by ITAR). About Us: The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Eligibility Requirements: Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations. Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense Take your career to new heights-apply today!
    $26-29 hourly 60d+ ago
  • Senior Assembly Technician - 1st shift

    GE Aerospace 4.8company rating

    Assembly technician job in Clearwater, FL

    In this role, you will perform a variety of electronic, electro-mechanical, and mechanical assembly operations on hardware components such as modules, boards, panels, drawers, frames, and cables, including complex rework, soldering, wiring, and testing. You will follow established procedures, work instructions, and schematics, and have the responsibility and authority to carry out all assigned tasks. The position requires a high school diploma or equivalent, the ability to read and comprehend technical instructions, soldering experience with J-Std certification within 30 days, the ability to lift up to 35 pounds, and the flexibility to work overtime and handle hazardous materials. Job Description At GE Aerospace, we believe the world works better when it flies, and we lead in the development and manufacture of advanced jet engines, components, and integrated systems for commercial and military aircraft. Joining our collaborative and diverse team means bringing your unique perspectives, innovative spirit, and drive to a people-first organization that values your ideas and supports your growth through our ongoing LEAN transformation. Your work will have a meaningful impact on millions of lives, and you will share in our sense of purpose and pride as we advance aviation technologies for today and tomorrow. Working at our Clearwater Location: Clearwater is a provider of engineering, circuit card assembly, OEM Avionics, and MRO services to commercial and military customers, with products and technologies that are diverse and highly sophisticated. Your work will contribute to systems that manage the performance of Boeing 737 and 787 aircraft as well as F-18s, F-35s, Harriers, and Apaches. In addition to working in a facility awarded OSHAS's highest safety rating, you will be part of a diverse team of 400+ employees, solving the global challenge of sustainable flight, earning merit-based rewards, working in a climate-controlled environment, and having opportunities for continuous learning and development. Are you ready to join a dynamic team where your skills in electronic, electro-mechanical, and mechanical assembly will shine? We are looking for a talented individual to perform a variety of production assembly operations, ranging from repetitive to non-repetitive tasks, involving hardware such as modules, boards, panels, drawers, frames, and cables. This role includes complex rework, soldering, wiring, and testing capabilities, allowing you to showcase your technical expertise. Key Responsibilities: * Diverse Assembly Operations: Engage in electronic, electro-mechanical, and mechanical assembly tasks, working with various hardware components like modules, boards, panels, drawers, frames, and cables. Your role will involve both repetitive and non-repetitive operations, ensuring a dynamic and varied work experience. * Technical Expertise: Utilize your skills in complex rework, soldering, wiring, and testing to ensure high-quality assembly and functionality of hardware components. * Procedure Adherence: Perform assembly operations using established procedures, work instructions, schematics, and other approved documentation, ensuring precision and consistency in your work. * Flexibility and Responsibility: Embrace additional responsibilities as assigned, demonstrating your adaptability and commitment to the team's success. You will have the authority to carry out all assigned tasks, empowering you to make a significant impact. Qualifications / Requirements: * Educational and Technical Skills: High school diploma or equivalent education, with the ability to read and comprehend technical work instructions. * Soldering and Certification: Soldering experience and the ability to become J-Std certified within the first 30 days of employment. * Physical and Work Requirements: Ability to lift and move materials up to 35 pounds, work with hazardous materials, and work overtime as required. Desired Skills / Experience: * Technical Proficiency and Experience: Proficient in using a personal computer to navigate online documents, drawings, and instructions, with a minimum of 6 years of industry or similarly related job experience. * Team Collaboration: Prior experience working in a team-oriented environment. Join us and be part of a team that values innovation, quality, and continuous improvement. Your skills and dedication will play a crucial role in our success. Apply now and embark on an exciting journey with us! Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No
    $55k-85k yearly est. Auto-Apply 52d ago
  • 1st Shift Mechanical Assembler

    Frankcrum Staffing, Inc. 3.5company rating

    Assembly technician job in Clearwater, FL

    Job Description1st Shift Mechanical Assembler Monday to Friday Shift: 7:00am -4:00pmClearwater, FLPay: $18-$20 We're seeking a skilled 1st Shift Mechanical Assembler to join our production team. As a technology leader, we provide cutting-edge software and digital solutions that empower businesses to transform and thrive. In this hands-on role, you'll be responsible for the assembly of mechanical components and products that are essential to our operations. Your key responsibilities will include: - Assembling mechanical components using a variety of hand tools and equipment - Performing inspections to ensure quality and functionality - Troubleshooting issues and problem-solving to maintain efficient production - Adhering to safety protocols and procedures To be successful in this position, you'll need: - Demonstrated experience in mechanical assembly or a related light industrial role - Proficiency in using hand tools, reading technical diagrams, and performing basic electrical work - Strong problem-solving and critical thinking skills - Excellent attention to detail and a commitment to quality - Effective communication skills, with the ability to work collaboratively in a team environment At our company, we're committed to creating an inclusive and diverse workplace where everyone can thrive. We are an equal opportunity employer and welcome applications from individuals of all backgrounds and experiences. If you're excited to put your mechanical assembly skills to work in a dynamic, technology-driven environment, we encourage you to apply today!#INDSW
    $18-20 hourly 12d ago
  • 3rd Shift - Manufacturing Assembly

    Sun Hydraulics Corp 3.8company rating

    Assembly technician job in Sarasota, FL

    The CVT Assembler will be responsible for assembling Sun Hydraulics' high-performance cartridge valves through documented assembly procedures ensuring that build meets engineering specification. Duties/Responsibilities: * Perform assembly on cartridge valves working with very small parts * Performing repetitive assembly tasks on order quantities from 50-200+ * Ensuring process procedures are followed to maintain high quality of production while meeting work area quotas * Developing knowledge of Sun product lines while learning to read blueprints and schematics * Housekeeping of assembly area such as sweeping and vacuuming area before the next shift * Communicating progress of incomplete work orders and issues to next shift Required Skills/Abilities: * Willingness to learn and grow through Sun Hydraulics * Ability to function in a fast-paced manufacturing environment * Ability to follow directions * Ability to read drawings and blueprints is a plus * Excellent attention to detail * Team player mentality * Positive attitude Education and Experience: * High school diploma or equivalent is preferred * Manufacturing experience is a plus Physical Requirements: * Prolonged periods of standing (6-8 hours) * Ability to lift up to 35 pounds
    $23k-30k yearly est. 16d ago
  • Assembler III, Mechanical

    Kemco Systems 3.8company rating

    Assembly technician job in Clearwater, FL

    CECO Environmental is a global leader in providing sustainable solutions for industrial air, water, and energy transition. Since 1966, we've been addressing the world's most pressing environmental challenges. Our mission is to protect people, the environment, and industrial equipment, making a tangible impact across industries like renewable energy, semiconductor manufacturing, power generation, and water treatment. As a purpose-driven company, we foster a culture of innovation, collaboration, and integrity, ensuring that every project we undertake creates lasting positive change. At CECO, you'll be part of a growing, dynamic team committed to a cleaner, safer, and more sustainable future. As part of the CECO Environmental family of brands, Kemco Systems plays a critical role in delivering specialized water solutions that protect both people and the environment. By joining our team, you'll contribute to our shared mission of protecting global industrial operations and shaping the future of environmental stewardship. The Mechanical Assembler III is responsible for the assembly, reworks and repairs on manufactured equipment and products in accordance with established procedures. This position reads work orders; follows and interprets production drawings and sample assemblies or receives verbal instructions regarding duties performed. The Mechanical Assembler II performs assembly work using hand-held tools and soldering equipment, and ensures the products meet quality standards, performing quality work checks. In addition, this role is responsible for supporting parts fulfillment in support of installed systems. Your Responsibilities Will Be: • Assembles and tests equipment (primarily industrial process pumps) per engineered drawings or as instructed by others. • Uses hand tools, power tools, and measuring devices such as tapes, gauges, calipers, and micrometers, power tools, pallet jacks, fixed gauges, and jigs. • Plans work and follows procedures; gathers required tools and materials based on instructions and specifications provided for the job. • Repairs, takes apart, rebuilds equipment (pumps) to obtain an acceptable result. • Inspects completed components for accuracy and functionality. • Performs tests on components as necessary. • Executes individual quality inspection throughout the assembly process, marking and setting aside parts which have obvious defects and informing supervisor and/or set-up personnel of any issues. • Reads and follows production orders and diagrams for the product being produced, tests electric wire and terminal connections for mechanical strength and electrical continuity in assembly. • Process parts orders by picking from inventory and preparing for shipment. Works with procurement as required to ensure product availability for fulfillment. • Completes proper paperwork for checklist. • Determines non-conforming material coming from other departments. • Operates and adjusts tools, gauges, use hand Implement continuous improvement practice to reduce errors. • Performs other duties of a similar nature and level as assigned. Required Qualifications: • A high school degree or GED, plus 3 plus years of experience working in the assembly, industrial, mechanical, or manufacturing fields. • Experience working with hand/power tools, torque wrenches, band saws, sanders/grinders required. • Experience with QC or Testing. • Must be mechanically inclined and have the drive to learn and grow in the technical space. Preferred Qualifications: • Electrical experience is a plus but not required. • Experience working with rotating equipment is a plus but not required. ADA Requirements: Positions in this function typically require typing, sitting, climbing, balancing, stooping, kneeling, crouching, crawling, reaching, standing, walking, pushing, pulling, lifting, fingering, grasping, feeling, talking, hearing, seeing and repetitive motions. • Concentrated mental and/or visual attention. The work involves performing complex tasks to very close accuracy and quality specifications, or a high degree of hand and eye coordination for sustained periods. • The job is typically performed under comfortable working conditions; any disagreeable elements are generally absent during normal performance of job. • Compliance with company attendance standards. Medium Work: Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Incumbents may be subjected to moving mechanical parts, electrical currents, vibrations, fumes, odors, dusts, gases, poor ventilation, chemicals, oils, extreme temperatures, inadequate lighting, workspace restrictions, intense noises, and travel. We Offer: We provide a variety of medical insurance plans, with dental and vision coverage, Employee 401(k), tuition reimbursement, and much more. At CECO, we are committed to a culture where every employee is valued and respected for their unique experiences and perspectives. We believe a diverse and inclusive work environment contributes to the rich exchange of ideas and diversity of thoughts, that inspires innovation and brings the best solutions to our customers. ABOUT US CECO's Commitment to Our People At CECO, our people are at the center of everything we do. Whether you're a professional looking for a career change, an undergraduate student exploring opportunities, or a recent graduate with an advanced degree, you'll find your chance to make a difference with CECO. ABOUT CECO CECO Environmental is a leading environmentally focused, diversified industrial company whose solutions protect people, the environment, and industrial equipment across the globe, serving a broad landscape of industrial air, industrial water and energy transition markets. We serve these markets and our global customers through our key business segments: Engineered Systems and Industrial Process Solutions. Learn more about CECO by visiting About Us. Equal Opportunity Employer CECO is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment. Accessibility Assistance or Accommodation If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: **************.
    $26k-32k yearly est. Auto-Apply 60d+ ago
  • Assembler

    Sybridge Technologies

    Assembly technician job in Saint Petersburg, FL

    Job DescriptionSalary: $18 after 90 days Corporate Profile SyBridge Technologies is the global leader in technology-enabled design, prototyping and manufacturing solutions for complex, high-precision parts. Our mission is to use technology to simplify and accelerate how parts are designed and manufactured. SyBridge is one of North Americas largest injection molding tooling platforms and the largest private on-demand digital manufacturer. Our AI/ML technology platform is supported by an industry-leading team of software engineers, computational geometry experts and data scientists. SyBridge Technologies is backed by Crestview Partners and comprises 15 acquisitions that bring together different products, services, and technologies into a unified technology-enabled platform. We are headquartered in Itasca, Illinois and operate through 18 locations across North America, Europe, and Asia. For more information, please visit ***************** Position Summary Assemblers willbe responsible for assembling molded components into finished products, while hitting assembly targets and ensuring that products meet quality standards. 12 hours shifts: Week 1 work 3 days have off 4 days & Week 2 work 4 days have off 3 days, shifts include every other weekend requirement) Day Shift: 7:00am to 7:30pm Key Responsibilities Assemble products and components accurately according to detailed instructions and specifications. Conduct quality checks to ensure finished products meet company standards and specifications, inspecting parts and components for defects. Maintain a clean, organized, and safe work area. Adhere to all safety regulations, procedures, and wear appropriate personal protective equipment (PPE). Monitor the assembly line for problems, material shortages, conveyor malfunctions, and other issues, reporting them to supervisors. Collaborate with team members to meet production goals and targets. Complete production paperwork accurately and keep records of materials used and production output. Qualifications: A strong focus on detail is crucial for accurate assembly and quality checks. The ability to read and interpret documents and assembly instructions is essential. The role requires physical stamina to stand for long periods and perform repetitive tasks. A team-oriented mindset and good communication skills are important for collaborating with others. Basic problem-solving skills are useful for addressing minor assembly issues. A high school diploma or equivalent is often a requirement. What We Offer: Competitive salary with opportunities for paid overtime Comprehensive benefits package effective from day one Professional development opportunities to enhance your skills Our commitment to your personal and professional growth Membership & Professional Fee Program Education reimbursement to support your ongoing learning Our commitment to you SyBridge Technologies is an Equal Opportunity Employer and prohibits Discrimination and Harassment of any kind. We are committed to the attitude of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at SyBridge are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, sex, sexual orientation, gender identity, National origin, veteran or disability status, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. SyBridge encourages applicants of all ages. This position will requiresitting or standing for periods of time. In accordance with Americans with Disabilities Act (ADA), SyBridge Technologies will provide accommodations when requested by the employee. When the employee becomes aware of any disabilities that would affect them from performing their duties, they will advise SyBridge Technologies if accommodation is required.
    $18 hourly 14d ago
  • Mechanical Assembler

    Balance Professional

    Assembly technician job in Clearwater, FL

    Job DescriptionMechanical Assembler: Pay: $18.00 - $21.00 per hour We are looking for someone to perform hands-on mechanical assembly to build high-quality current and power transformers. Responsibilities: Read and follow production diagrams and work instructions for accurate assembly. Use hand tools and equipment to complete mechanical assembly tasks. Solder terminals to magnet wire with precision and care. Inspect transformers for exposed wires and perform necessary corrections. Clean transformers after the resin process to ensure quality standards. Complete final assembly, including installing hardware on finished products. Safely lift and handle materials weighing up to 50 lbs. Adhere to all safety protocols, instructions, and company procedures. Qualifications: High School Diploma or GED, or equivalent combination of education and 1-3 months of related experience and/or training. Ability to read and interpret work instructions, diagrams, and safety documents in English. Basic math skills to perform necessary calculations for assembly tasks. Competence with hand tools and equipment required for mechanical assembly.
    $18-21 hourly 12d ago
  • Solder Assembler - 2nd Shift

    Butler Technical Group

    Assembly technician job in Oldsmar, FL

    Pay Range: $25-27 Pay based on experience 2nd Shift - Mon-Thurs 330pm - 200am some OT on FRIs or SATs Open to US Citizens & US Permeant Residents Experience Need: 6yrs in SMT / TH Thru-hole solder assembly and rework must have a strong documentation of soldering on resume THE COMPANY - Work with one of the Largest American Owned Aerospace & Defense Companies. JOB DESCRIPTION 6yrs experience Soldering (SMT & Through hole) working under 2 Standards below- Certificate not needed IPC-A-610 IPC-J-STD IPC-WHMA-A-620, Not Required * We are seeking a highly experienced Solder Assembler to join our precision electronics manufacturing team. * The successful candidate will be an expert in both surface mount technology (SMT) and through hole Soldering, with a proven track record of removing, repairing, and replacing a wide variety of components-including bottom terminated parts such as QFNs, BGAs, and LGAs. * The role requires hands on use of advanced rework equipment and the ability to verify workmanship using Xray Inspection Techniques. * Perform high mix, low volume assembly and inspection of solder joints on SMT and through hole components on complex printed circuit boards (PCBs). * Execute removal, replacement, and repair of bottom terminated components (QFNs, BGAs, LGAs) using hot air pencils, hot plates, and other rework tools. * Conduct precise reflow, pre heat, and cooling cycles to meet component specific thermal profiles. * Operate and maintain Xray inspection equipment to evaluate solder joints on hidden pads and verify rework quality. * Interpret engineering drawings, work orders, and Bill of Materials (BOM) to ensure correct component placement and orientation. * Perform in process quality checks (visual, AOI, Xray) and document results per quality system requirements. * Troubleshoot solder related defects (e.g., tombstoning, voids, solder bridges) and implement corrective actions. * Maintain ESD controlled environments; follow all safety and compliance procedures. * Contribute to continuous improvement initiatives, suggesting tooling upgrades or process optimizations. * Familiarity with IPC 610, IPC 620 IPC 7711 Soldering Standards, ISO 9001, and AS9100 (defense/aerospace) quality systems. OTHER Requirements: * High school diploma or GED * Must be able to read/write English * Pass a medical exam / physical * 6yrs in SMT / TH Thru-hole solder assembly and rework must have a strong documentation of soldering on resume Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law. Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices. Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at accommodations@butler.com
    $25-27 hourly 31d ago
  • Assembly Technician

    Zeromark

    Assembly technician job in Sarasota, FL

    About Us Zeromark builds AI-driven counter-drone systems that actually work in combat. No PowerPoints. No hype. Just field-proven technology that saves lives. We've doubled year-over-year for two straight years, winning contracts that prove what we've always known: real innovation happens in the dirt, not in conference rooms. Our systems transform standard weapons into AI-powered platforms that detect, track, and neutralize drone threats-because a $200 drone shouldn't require a million-dollar countermeasure. Here's what makes us different: ZeroMark operators don't build from behind screens. You'll validate tech from Blackhawk helicopters, train alongside Tier-1 units (who happen to be our coworkers), and test at legendary ranges from White Sands to the cliffs of Hawaii. When we say field-tested, we mean you'll shoot it, fly with it, and push it to failure. We don't tweet about changing the world-we're too busy actually doing it. Dark humor required, thick skin recommended. If you want to make an actual impact-and have some unforgettable Tuesday afternoons along the way-let's talk. We're all about delivering practical, field-tested tech, not just theories. The Role The Assembly Technician & Light Machinist will be responsible for the precise assembly of electro-mechanical components and the operation of light machining equipment to produce parts for our advanced counter-drone systems. This role requires a strong understanding of mechanical assembly principles, attention to detail, and a commitment to quality. Key Responsibilities Assembly: Perform precise assembly of complex electro-mechanical components and sub-assemblies according to engineering drawings, specifications, and work instructions. Utilize hand tools, power tools, and specialized equipment for assembly tasks. Conduct quality checks and inspections throughout the assembly process to ensure compliance with design specifications and quality standards. Troubleshoot and resolve assembly issues, identifying root causes and implementing corrective actions. Maintain accurate records of assembly progress, materials used, and quality control data. Machining: Operate light machining equipment (e.g., lathes, milling machines, drills) to produce and modify components from various materials. Read and interpret technical drawings, blueprints, and CAD models to determine machining operations. Set up and adjust machining parameters, including feeds, speeds, and tool selection. Perform routine maintenance on machinery and tooling. Inspect machined parts for accuracy, dimensions, and surface finish using precision measuring instruments. General: Collaborate with engineering, production, and quality teams to optimize manufacturing processes and improve product design. Adhere to all safety regulations and best practices in the workshop. Maintain a clean and organized work environment. Participate in continuous improvement initiatives and training programs. Qualifications Education: High school diploma or equivalent required. Technical certification or associate's degree in a relevant field (e.g., Mechanical Engineering Technology, Machining Technology) preferred. Experience: Minimum of 3-5 years of experience in electro-mechanical assembly, preferably in a defense, aerospace, or high-tech manufacturing environment. Proven experience operating light machining equipment. Skills: Proficiency in reading and interpreting engineering drawings, schematics, and work instructions. Strong mechanical aptitude and manual dexterity. Familiarity with various assembly techniques and tools. Competence in operating basic machine shop equipment. Ability to use precision measuring instruments (calipers, micrometers, gauges). Excellent problem-solving skills and attention to detail. Ability to work independently and as part of a team. Strong communication skills. Physical Requirements: Ability to lift and move up to 25 pounds. Ability to stand for extended periods and perform repetitive tasks. Good vision and hand-eye coordination. Desired Attributes Enthusiasm for working in a fast-paced, startup environment. Proactive and eager to learn new technologies and processes. Commitment to producing high-quality work. Ability to adapt to evolving project requirements. Benefits Competitive salary Comprehensive health, dental, and vision insurance Paid time off and holidays Opportunities for professional development and growth Dynamic and collaborative work environment The chance to contribute to impactful defense technology
    $27k-35k yearly est. Auto-Apply 60d+ ago
  • Production Technician

    Bnpc

    Assembly technician job in Saint Petersburg, FL

    Production Technician Job Description PT-7 Each SERVPRO Franchise is Independently Owned and Operated. Revised 6/12 Primary Role: Respond to service calls as needed. Perform services as assigned, following SERVPRO production guidelines. Communicate with crew chief to make sure all customer needs are met. Support crew chief and other production personnel, as needed. Clean and maintain vehicles, equipment, warehouse, and office areas, as needed. Results Expected: Production processes are performed according to guidelines and work orders. Communications to crew chief and customers are timely. Jobs are completed at or beyond customer expectations. Vehicles, equipment, and facilities remain clean, orderly, and working properly. 1. Executive: Manage Customer Satisfaction a. Notify crew chief of customer needs and concerns. • Communicate with crew chief regarding customer needs and successfully meet those needs. • Report any complaints about the performance of services. 2. Production: Production Processes and Jobsite Support a. Adhere to 1-4-8 job response. • Provide personnel availability for response to emergency services as required by SERVPRO response commitment. b. Perform production processes following SERVPRO production guidelines per work order per crew chief directions. •. Inventory and load the van with equipment, products, and supplies needed for jobs. • Set up staging area and equipment for each job. • Prepare rooms for cleaning processes. • Follow EZ Production Guidelines for all production processes. • Assist the crew chief and other production personnel. • Perform end-of-job/end-of-day cleanup and breakdown. c. Leave jobsite with a clean and orderly appearance. • Show respect for customer's home/property. d. Follow SERVPRO uniform policy. e. Develop production expertise in services, cleaning products, and equipment. • Participate in training activities on a regular basis. • Seek certification through the SERVPRO Employee Certification Training Program (ECTP) and relevant Institute of Inspection, Cleaning, and Restoration Certification (IICRC) certifications. • Enroll in all relevant training programs and achieve all relevant production certifications. • Read equipment and product directions and Material Safety Data Sheets (MSDS) to learn correct usage and application. • Learn how to properly operate equipment by reading owner's manuals and from training with other team members. Requirements Willingness to work hard and always put the customers' needs first. Have a "Yes We Can" Attitude
    $26k-37k yearly est. 60d+ ago
  • Light Industrial - Cable Assembler Cable Assembler

    Lancesoft 4.5company rating

    Assembly technician job in Oldsmar, FL

    Job Title: Cable Assembler Duration: 12/9/2025 -3/8/2026 Pay Rate: $18.00 -$22.00 per hour (OT after 40 hrs) Shift Timings: Mon-Thurs, 5: 00 AM -3: 30 PM (4/10 schedule) Job Description: This role is for a Cable Harness and Soldering Assembler. The candidate will be responsible for assembling cable harnesses and related wiring components following established quality, safety, and production standards. High mechanical aptitude is required. Key Responsibilities: Assemble cable harnesses per print, work instructions, and diagrams. Use hand tools to strip, crimp, solder, and terminate copper and coax wires. Follow IPC-A-610 and IPC-WHMA-A-620 standards (experience preferred). Read and interpret wiring diagrams and assembly drawings. Conduct visual inspections to ensure workmanship quality. Maintain a clean, organized, and safe work area. Required/Preferred Skills: 1-2 years experience in cable harness assembly (preferred). Experience with IPC-A-610 and IPC-WHMA-A-620 requirements (preferred). Ability to use hand tools such as crimpers, strippers, and soldering tools. Ability to read and follow wiring prints and assembly instructions. Strong attention to detail and mechanical aptitude. Must be able to read and write English.
    $18-22 hourly 18d ago
  • 2nd Shift Assembler

    Coherent Staffing Solutions

    Assembly technician job in East Lake, FL

    Coherent Staffing is looking for candidates for a 1 year contract assignment working as a 2nd shift assembler. The pay for the position is between $16 to $20 per hour and will be determined based on experience. Job Description: Under minimal supervision, Responsible for providing protection for a variety of circuit boards through the use of coatings, adhesives, potting, and thermal compounds. Responsible for providing protection for a variety of circuit boards through the use of coatings, adhesives, potting, and thermal compounds for the encapsulation (protective enclosure) of assemblies. Essential Role and Responsibilities: • Ability to read and interprets prints, labeling diagrams and mixing ratios. • Operate several different types of dispensing and PVA coating machines to meet customer specifications. • Mask and\/or tape circuit boards in areas that are to be free of conformal coating or potting. • Inspect assemblies to ensure proper coating coverage. • Maintain the coating and dispensing machines to ensure proper operating condition. • Remove any excess coating and perform manual touch\-up of any areas the coating machine may miss so boards maintain a consistent high quality. • Transport racks of circuit boards from one destination to another to continue the manufacturing process. • Maintain machines including changing the fluids and mixers and cleaning machines to ensure proper and efficient operation. • Perform general housekeeping duties to provide a safe and clean working environment at all times. • Knowledge of various materials used. • Must complete applicable Specific Function Training courses. • Additional tasks may be assigned by the supervisor to accommodate fluctuating production requirements. • Encapsulation of discrete assemblies. • Replenishes chemicals, solvents, compounds, process fluids as required, including dispensing into secondary containers and chemical cleaning. • Prepares and applies potting, bonding and coating compounds, lubricants, spray coats or insulated tape to a variety of components and assemblies, inclusive of all finishing processes. • Advances or retrieves product, material, and tools in house and from local suppliers for self and others. Mandatory: • Technical trade school graduate or associate technical degree preferred, as per management's discretion. • Minimum of three (3) years similar trade experience. • Computer literate necessary. • Detailed spray painting skills. • A positive attitude and dependability is a must for this position. "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"633654155","FontFamily":"Verdana, Geneva, sans\-serif","job OtherDetails":[{"field Label":"Industry","uitype":2,"value":"Government\/Military"},{"field Label":"City","uitype":1,"value":"Oldsmar"},{"field Label":"State\/Province","uitype":1,"value":"Florida"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"34677"}],"header Name":"2nd Shift Assembler","widget Id":"365208000000072311","is JobBoard":"false","user Id":"365208000000125003","attach Arr":[],"custom Template":"3","is CandidateLoginEnabled":false,"job Id":"365208000006279001","FontSize":"12","google IndexUrl":"https:\/\/coherentstaffing.zohorecruit.com\/recruit\/ViewJob.na?digest=oIwz2wdJbkULaKTprPARFhRG2m9t@@PTEYDiJLKFfJI\-&embedsource=Google","location":"Oldsmar","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do","logo Id":"ml6q26972b1769bdc41fd886b8676f0a5bc6f"}
    $16-20 hourly 60d+ ago
  • Machine Tech

    Royal Alliances Inc.

    Assembly technician job in Clearwater, FL

    The Machine Technician is responsible for the operation, maintenance, and repair of presorting machines used in mail processing and sorting facilities. Your expertise in troubleshooting and resolving technical issues will ensure the efficient and accurate sorting of mail items. This position requires strong mechanical and electrical skills, attention to detail, and the ability to work in a fast-paced environment. The ideal candidate should have a high school diploma, previous experience in a similar role, knowledge of mail sorting processes, strong attention to detail, and the ability to work well under pressure. Joining our team offers an opportunity to contribute to the smooth operation of our mail processing services and make a significant impact on customer satisfaction. General Duties & Responsibilities: Operate and maintain presorting machines to ensure accurate and efficient sorting of mail items. Perform routine maintenance tasks, including cleaning, lubrication, and calibration of the machines. Troubleshoot and diagnose equipment malfunctions and implement timely repairs to minimize downtime. Conduct regular inspections to identify potential issues and proactively address them. Collaborate with team members and supervisors to optimize machine performance and resolve operational challenges. Keep accurate records of machine maintenance activities, repairs, and parts inventory. Stay updated on industry trends, technological advancements, and regulatory requirements related to presorting machines. Comply with safety protocols and ensure adherence to company policies and procedures. Work efficiently and effectively to contribute to the overall success of our mail-processing operations. Keeps work area clean by placing mail bins under machines or in Troubleshoot and remove mail piece jams from machine. Picks up plastic straps and strapping material off floors to prevent possible tripping hazards. Perform all additional duties as required. Job Qualifications: High school diploma or equivalent; technical certification or associate degree in a related field is preferred. Enjoys a fast-paced, physical production environment while developing new skills in the mailing industry. Proven experience as a Presorting Machine Technician or similar role, preferably in a mail service or postal environment, with a strong understanding of mail sorting equipment. Proficient in diagnosing and repairing mechanical, electrical, and electronic systems. Familiarity with machine operation, maintenance, and troubleshooting techniques. Strong problem-solving skills and the ability to work under pressure in a fast-paced environment. Excellent attention to detail and organizational skills. Basic computer literacy for record-keeping and machine interface operations. Strong attention to detail and organizational skills to ensure accurate sorting and tracking of mail items. Ability to work well under pressure and meet deadlines in a fast-paced environment. Physical stamina and dexterity to handle mail trays and operate machinery. Excellent communication skills and the ability to work collaboratively with team members. Understands and follows safety and other operational directions. Ability to be dependable, reliable and work independently. Ability to work overtime which may include weekends, holidays and or a different shift with little or no advance notice. Physical Demands: While performing the duties of this job, the employee is regularly required to walk; sit; use hands to, handle, or feel; and talk or hear. The employee frequently is required to stand. The employee is occasionally required to reach with hands and arms. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, and the ability to adjust focus. EEO Statement: Royal Alliances is committed to providing Equal Opportunity in Employment to all applicants and employees regardless of race, color, religion, gender, age, national origin, military status, veteran status, handicap, physical or mental disability, sexual orientation, gender identity, genetic information or any other characteristic protected by law.
    $35k-50k yearly est. Auto-Apply 60d+ ago
  • Mechanical Assembler - Heavy Steel Fabrication

    Hammer Haag Steel

    Assembly technician job in Clearwater, FL

    At Hammer Haag Steel, you're more than an employee - you're part of a team that takes pride in building incredible things. We are a family-owned custom steel fabrication shop with 120 skilled team members who bring projects to life, from small precision jobs to massive builds like roller coasters and industrial machinery. Everything happens under one roof - prefabrication, machining, fabrication, painting, and assembly - which means you get to see the entire process from start to finish. We believe in growing our people just as much as we grow our capabilities. You'll have access to hands-on training, opportunities to learn new skills, and room to advance if you're willing to work hard and go above and beyond. With state-of-the-art equipment, a variety of exciting projects, and a supportive team environment, Hammer Haag Steel is a place where your work makes a visible impact every day. We are seeking an experienced Mechanical Assembler to join our Assembly Department. This role involves assembling large steel and mechanical components such as trailers, frames, and structural systems. You will work closely with a Senior Mechanical Assembler to ensure builds are completed accurately, efficiently, and to specification. The ideal candidate has a strong mechanical background, experience working with heavy fabricated components, and the ability to read and interpret blueprints and technical drawings. Welding experience is a plus but not required. Requirements Key Responsibilities Perform precise mechanical assembly of large, fabricated components according to blueprints and specifications. Work closely with the Senior Mechanical Assembler to plan and execute assembly projects. Use mechanical techniques such as heating, freezing, and alignment to achieve proper fits and tolerances. Inspect and verify assemblies to ensure conformance with drawings and quality standards. Maintain organized work areas and follow all safety procedures. Operate cranes, forklifts, and other equipment to position and secure large assemblies. Identify and communicate any discrepancies or issues during the build process. Qualifications Proven experience in mechanical assembly, preferably with large steel or trailer assemblies. Strong mechanical aptitude and understanding of mechanical systems. Ability to read and interpret blueprints and technical drawings. Experience with precision measuring tools. Reliable form of transportation is required. Welding experience is a plus. Must be detail-oriented and capable of working independently or as part of a team. If you do not have mechanical assembly experience with large fabricated or steel components (or applicable experience), your application will not be considered. Hammer Haag Steel is a Drug-Free Workplace. A drug test and background check will be conducted prior to a final offer of employment.
    $25k-32k yearly est. 60d+ ago
  • Senior Assembler

    Leonardo DRS, Inc.

    Assembly technician job in Largo, FL

    **Job ID: 113385** The Leonardo DRS Naval Electronics business provides leading naval computing infrastructure, network and data distribution and middleware enterprise services, as well as world-class manufacturing and support capabilities. Responsible and accountable for producing quality work to prescribed standards, with a focus on continuous improvement to meet customer commitments on schedule and within budget. **Job Responsibilities** + Responsible and accountable for producing quality work to prescribed standards, with a focus on continuous improvement to meet customer commitments on schedule and within budget. + Follow written work instructions. + Responsible and accountable for producing quality work to prescribed standards, with a focus on continuous improvement to meet customer commitments on schedule and within budget + Follow written work instructions + Work under minimal supervision on duties and tasks that are frequently non-routine, adapting procedures, techniques, tools, materials and/or equipment to meet special needs + May perform more detailed tasks requiring deeper knowledge and experience in the specified processes and procedures + Rely on experience and judgment to plan and accomplish assigned goals + Able to effectively communicate with other functional departments, such as Engineering, Purchasing, Manufacturing, Engineering, Quality, and Sales departments + Resolve most questions and problems, referring only the most complex issues to higher levels + Serve as a resource to others in the resolution of complex problems and issues + Be a self-starter and demonstrate good decision making ability + Must maintain a safe work environment by adhering to all safety procedures including those which govern the handling of materials, chemicals, tools, and equipment (WHMIS) + Proper use of required PPE + May periodically assist in orienting and training lower level employees + May participate in LEAN Events, "Six S" activities, action teams etc. + Support, communicate, reinforce and defend the mission, values and culture of the organization + Perform advanced-level assembly functions, which may include: prep, mechanical, harness, cable, printed circuit board sub-assemblies, spray application, and inspection, typically working from models and/or drawings, within Production + May perform soldering and installation of components to contract specifications, using a wide range of tools and equipment + Interpret blueprints, Process Flow Instructions and other written or verbal instructions + Responsible and accountable for producing quality work to prescribed standards, with a focus on continuous improvement to meet customer commitments on schedule, within budget and to SPC standard practices + Must be trained across all assembly stages, work w/Engineering to build 1st articles by interpreting print/specification with no process provided and the ability to interpret/assemble all units in dept + If required, perform all aspects of inspection: in-process, final and source; allocate partial points - 3 points in-process - 3 points final - 4 points source **Qualifications** + High school diploma or GED with a minimum of 5 years of experience in specialty area e.g. welding, tool making _\#NEL #LI-SN1 #INDNEU_ _Taking care of our people is a top priority at Leonardo DRS. We are proud to offer competitive salaries and comprehensive benefits, including medical, dental, and vision coverage, a company contribution to a health savings account, telemedicine, life and disability insurance, legal insurance, and a 401(k) savings plan. We champion wellness programs that focus on physical, emotional, and financial well-being. We develop our talent by offering programs and activities to support career-growth, professional development, and skill enhancement. And we understand there is more to life than work, and the importance of offering flexible work schedules with our 9/80 program, competitive vacation, health/emergency leave, paid parental leave, and community service hours._ _*Some employees are eligible for limited benefits only_ _Leonardo DRS, Inc. and its subsidiaries provide equal opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, protected veteran status, or any other characteristic protected by federal, state, or local laws._
    $27k-41k yearly est. 16d ago
  • Manufacturing Assembler

    Cardiocommand Inc.

    Assembly technician job in Tampa, FL

    Job DescriptionEssential functions include using hand tools and operating production equipment to manufacture medical devices and ancillary products. Following drawings, guidelines, and/or diagrams to ensure product specifications and tolerance levels are met and performing other miscellaneous tasks as assigned. This position requires excellent hand-eye coordination, manual dexterity, and measuring in both English and Metric units. Educational requirements are a High School Diploma, General Equivalency Diploma (GED), or High School Equivalency Diploma (HSED). The Florida Ready to Work credential is desired and the Certified Production Technician (CPT) credential is preferred. An OSHA 10 certificate of completion is a plus. Candidates must be able to read, write, and speak English, preferably lift 50 pounds, and have visual acuity to perform the essential functions. 1-3 years of manufacturing experience is required (preferably in medical device manufacturing) however entry-level candidates with a Certified Production (CPT) credential will be considered. All candidates must pass a drug screen and background check. This is a 3-4 month part-time temporary assignment, 40 hours per week.
    $20k-27k yearly est. 26d ago
  • Assemblers

    HSGI

    Assembly technician job in Pinellas Park, FL

    HSGI, Inc. is currently on the hunt for a dedicated and passionate aircraft assembler for our client in Pinellas Park, FL Responsibilities: Performs a variety of operations to manufacture, assemble and/or refurbish aircraft parts and structures such as F-16 canopies, F-35 canopies, and C-130 sub-assembly components. Assemblies can require controlled tooling as well as build to print. Tasks include aligning parts on jigs using both templates and fixtures. Performs part-fitting operations such as minor filing, sawing, burring, crimping, trimming, framing, drilling, reaming, riveting, countersinking, and cold working. Measures parts with a variety of methods to verify dimensions. May modify incomplete and complete assemblies to incorporate changes and perform repairs. Works from blueprint diagrams, drawings, specifications, and shop orders. Monitors and verifies quality and develops corrective action. Performs other duties as assigned. Requirements: 1 - 2 years of sheet metal assembly/aircraft sheet metal structure experience is required. Previous experience as an Assembler and/or Aircraft Structures Mechanic is highly preferred. Previous aircraft structure on the F-16, C-130, and F-35 is highly preferred. Interpersonal skills and ability to interface with all levels, to work in teams or independently and communicate effectively with co-workers or supervisory staff. High School Diploma or equivalent. Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data. Competently uses computers and other systems to access, maintain and manipulate data.
    $21k-28k yearly est. 60d+ ago

Learn more about assembly technician jobs

How much does an assembly technician earn in Saint Petersburg, FL?

The average assembly technician in Saint Petersburg, FL earns between $24,000 and $40,000 annually. This compares to the national average assembly technician range of $28,000 to $43,000.

Average assembly technician salary in Saint Petersburg, FL

$31,000
Job type you want
Full Time
Part Time
Internship
Temporary