Assembly technician jobs in Torrance, CA

JSG is hiring an Electronic Assembler in Torrance, CA. Pay rate: $20-$22 DOE The Electronic Assembler provides the skill set and knowledge to properly configure complex RF power amplifier assemblies. Experience needed in RF components, RF devices, assembly techniques especially printed circuit boards for power amplifiers, including coaxial transformers, ferrites, and all RF related passive components. The Electronic Assembler makes all electrical harnesses and RF coaxial cables; includes soldering, wiring, mechanical and electrical assembly. Essential Functions Works from production assembly instructions, schematics, rough sketches, and verbal instructions or notes to assemble, wire and install a wide variety of complex mechanical assemblies. Performs various cable assembly operations on shielded cables, ribbon cables, and wire harnesses. Performs operations such as assembling units of high complexity including printed circuit boards, modules, chassis, cable harnesses and similar tasks. Typical cable assembly tasks include cable cutting, jacket removal, shield preparation and termination, ribbon cable preparation and termination, and stripping, tinning and termination of wire harnesses. Performs a variety of miscellaneous shop work and other duties as assigned by supervisor. Responsible to keep clean, orderly, and safe work areas. Works with hand tools such as soldering iron, wire strippers, crimpers, wrenches, screwdrivers, and power tools. Assists in reviewing documentation including assembly prints, part lists, and mechanical prints related to building and testing hardware. Qualifications Requires two or more years of assembling electrical parts, and familiarity with RF connectors. Must have previous training in IPC J-STD-001 and IPC-A-610 certification or equivalent. Must be able to read, write and speak basic English, perform basic math, and follow instructions. Must be able to read and understand assembly prints, parts list, wiring diagrams and wiring lists. Schematic familiarity and understanding of part numbers, polarity designations, color codes, etc. Position requires use of hand tools, power tools, and soldering irons in order to complete quality product. Must be able to work on prototype, engineering and production type hardware, rough sketches, and verbal instructions or notes to assemble, wire and install a wide variety of complex mechanical assemblies. Familiarity with manufacturing Quality and Inspection processes is a plus. #D800 JSG offers medical, dental, vision, life insurance options, short-term disability, 401(k), weekly pay, and more. Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.

Electro-Mechanical Technician - Industrial High Voltage Duration: 12 Months Job Type: Temporary Assignment Work Type: Onsite Pay Rate: $44.00-$44.00/hr TekWissen is a global workforce management provider headquartered in Ann Arbor, Michigan that offers strategic talent solutions to our clients world-wide. Our client is a recognized prominent global enterprise in the automotive sector, listed among the top 50 companies in the Global Fortune rankings. As a leading player in the global automotive industry, our client manufactures vehicles in 27 countries and effectively markets them across over 170 countries and regions worldwide. Job Description: Stationary test apparatus instrumentation w/proprietary and off-the-shelf data acquisition equipment. Data acquisition & compilation including system data, performance data, etc. Participate in and support stationary testing including test cell configuration, maintenance, installation / removal of test parts, etc. Parts/consumables ordering including inventory management. Troubleshoot & repair mechanical (when necessary) & electrical systems (primary focus) which includes off-site - (at customer - field) sites. Perform routine maintenance where necessary of test units, test equipment, associated peripheral equipment, etc. Take part in and support development of Job Safety Analysis (JSA's) prior to commencing work. Issue daily, weekly and/or periodic general and technical reports where necessary. Requirements: Minimum 4-Years of experience as a Power Plant Technician, Generator Technician or experience from a transferable industry. Experienced utilizing instrumentation & controls for generators, compressors, motors, etc. Experience in troubleshooting generators and/or various equipment including mechanical, pneumatic, electrical, PLC's, etc. Ideal candidate would have knowledge & experience in inspecting, testing, diagnosis & repair of natural gas, electric-diesel generators, automatic transfer switches, etc. High voltage and low voltage experience is a must. High voltage certification (1000V AC / DC) is a plus. Knowledge of Fuel Cell systems is a plus. Ability to read and understand technical manuals, wiring diagrams (for systems and instrumentation). Experience in commissioning new equipment such as generators. Meet or exceed the following criteria: Good driving record - no accidents & no traffic violations within the last 3-years. Proficient w/Windows, email, MS Word, Excel (agency to submit results of a computer aptitude test demonstrating experience level). Excellent communication & organizational skills. Experience driving an M/T vehicle is a plus. Strong understanding & working level knowledge of commercial / industrial electrical systems. Vehicle electrical system diagnosis & repair is plus. Works well independently - without direct supervision. Capable of adapting to a continuously changing work environment - including at remote test locations or customer sites. Fabrication experience (i.e., machine shop, welding (MIG & TIG), etc.). TekWissen Group is an equal opportunity employer supporting workforce diversity.

Deburr/Finishing Tech. (Valencia, CA) Shift: Graveyard (9:00 PM - 5:00 AM) Pay: Up to $22/hour (based on experience) We're seeking a detail-oriented Deburr Operator to remove sharp edges and finish metal parts per blueprint specifications. Responsibilities include using hand tools, following work orders, monitoring quality, and maintaining a clean, safe work area. Requirements: Must have Deburring Experience Mechanical aptitude and ability to use measuring tools Lift up to 25 lbs; push up to 50 lbs High school diploma or GED Team player, reliable, willing to work overtime if needed Desired Skills and Experience Deburr/Finishing Tech. (Valencia, CA) Shift: Graveyard (9:00 PM - 5:00 AM) Pay: Up to $22/hour (based on experience) We're seeking a detail-oriented Deburr Operator to remove sharp edges and finish metal parts per blueprint specifications. Responsibilities include using hand tools, following work orders, monitoring quality, and maintaining a clean, safe work area. Requirements: Must have Deburring Experience Mechanical aptitude and ability to use measuring tools Lift up to 25 lbs; push up to 50 lbs High school diploma or GED Team player, reliable, willing to work overtime if needed Apply today and join a team committed to precision and quality! All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance. For unincorporated Los Angeles county, to the extent our customers require a background check for certain positions, the Company faces a significant risk to its business operations and business reputation unless a review of criminal history is conducted for those specific job positions.

Electromechanical Assembly Technician Assemble high speed motor, generator and turbo machinery equipment including performing sub assembly and full system level testing, in accordance with applicable drawings, schematics and specifications. Essential Duties and Responsibilities: • Mechanical assembly and test of motor/generator components and subassemblies • Assembly requires knowledge and use of metrology tools including height gauges, calipers, micrometers) and capability of calculating stack-up tolerancing of subassemblies • Use of tooling for advanced machine assembly including hoists, cranes, fixtures • Perform electrical checks including resistance, inductance, hi-pot using appropriate meters. • Perform functional tests of motor and capturing pertinent information and recording information in build worksheet (Excel) • Interface with engineering or manufacturing teams regarding design and build issues • Give feedback on design and processing to support continuous improvement Skills, Experience, Education, and Abilities: • 3+ years' experience as a technician in production environment or equivalent education/experience • Ability to produce assemblies following routers, work instructions, and blueprints • Ability to conduct in-process checks of assemblies • Ability to use appropriate equipment to perform in-process tests (i.e., digital multimeters, inductance meters, hi-pot meters) • Ability to use Microsoft Office tools including Excel and Word • Ability to conduct basic verification/troubleshooting of own work • Understanding of basic theory behind motor/generator, power electronics and magnetic bearing component assembly and operation a plus • Soldering Certification a plus

Job DescriptionDescription: Advanced Cooling Technologies, Inc. (ACT) is a premier thermal solutions provider providing component and system level solutions and structures. Our products and technologies have become integral parts of numerous mission-critical devices, including life-saving MRI and CT scanners, US Military applications, weather and telecommunication satellites, exploratory space missions, and much more. We are proud to be doing work that really makes a difference in our world- and beyond! Assemblers will be expected to perform numerous assembly and fabrication duties involving advanced composites such as Carbon Fiber, Kevlar, and complex adhesive systems. Because of the nature of spacecraft, and military hardware, all technicians must exhibit a high degree of discipline and work ethic. Assembly Technicians must have expansive experience with Aerospace composite assembly and fabrication and must be willing and able to perform a wide range of fabrication duties with a high degree of craftsmanship. Senior technicians are also expected to be innovative, versatile, and provide both leadership and training to junior technicians. Responsibilities: Assemble aircraft components and subassemblies according to manufacturing plans, drawings, specifications, and instructions Attach mechanical fasteners and other hardware onto components or subassemblies using rivets, screws, adhesives, or other fasteners Prepare surfaces for bonding by light sanding Perform masking operations on composite and metallic components, and subassemblies, for priming operations Perform edge and core filling operations as required for final assemblies Identify parts (part marking) as required by customer specifications Ensure that the materials used in fabrication meet the required specification and shelf-life requirements Clean fabricated parts when required, as required, during fabrication operations Requirements: High School Diploma or Equivalent Ability to operate in a fast-paced environment and contribute immediately upon hire Must be a US Person as defined by 22 C.F.R. §120.15? (U.S. Citizen, lawful permanent resident, refugee or asylee) Composite experience gained within an aviation manufacturing or aerospace company High volume manufacturing experience is a plus Must have a high level of technical skills to perform job duties Must be able to read blueprints and manufacturing instructions Must have operational knowledge of basic measurement tools: scales & calipers We offer an attractive and competitive compensation/benefits package, which includes a profit-sharing bonus plan. Our work environment is comfortable, collaborative, and stimulating. Apply now to get started on a career with ACT! If you are looking for an opportunity to start a career with a growing company doing exciting and important work, please apply today! ACT is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, status as a qualified individual with a disability, or any other trait protected by law. E-verify employer.

About the Company: DwyerOmega is a globally trusted leader in manufacturing innovative instrumentation solutions for the Process Measurement, Automation, Control and HVAC markets. With very strong brand recognition and high levels of customer loyalty, DwyerOmega has an unmatched reputation for providing customized solutions that meet and exceed customer needs. Our team of engineering experts help our customers select technical, and often configured, product solutions for their unique applications. The company offers over 300,000 state-of-the-art products for process measurement and control of temperature, humidity, pressure, strain, force, flow, level, pH, conductivity, and indoor air quality, and is a recognized global leader in the digital marketing of technical products. The products that we manufacture are used to control and drive process efficiency, creating safe and sustainable environments. At DwyerOmega, we enable our customers to improve the world - one measurement at a time. We achieve this through our unwavering commitment to technology, customer service, and overall continuous improvement. Every day, we strive to cultivate a culture of ingenuity, empowerment, accountability, adaptability, and speed. The company's corporate headquarters are based in Michigan City, Indiana, and Norwalk, CT with manufacturing locations and sales offices located throughout the world. Analytical Industries: Analytical Industries is a leading provider of advanced gas analysis and measurement solutions for industrial, medical, and environmental applications. We take pride in our engineering excellence, precision manufacturing, and commitment to helping customers achieve accurate, reliable process control. As part of the DwyerOmega family, we bring together decades of instrumentation expertise and customer-focused innovation. Position Summary: The Assembler is responsible for assembling, wiring, soldering, testing, and inspecting small electro-mechanical components used in sensor and analyzer products. This position requires close attention to detail, steady hands, and adherence to established quality and safety standards. Working under the direction of the Lead or Production Manager, the assembler follows detailed assembly instructions, performs accurate and repetitive work, and supports overall production efficiency. The role also includes maintaining a clean and organized work area and performing all other duties as assigned. Responsibilities include the following. Other duties may be assigned. Assemble electrochemical sensors and electromechanical analyzers, and related subcomponents according to engineering drawings, schematics, and work instructions. Perform wiring, soldering, and mechanical assembly using hand tools and electronic testing equipment. Log production results, nonconformities and test outcomes accurately in manufacturing documents such as the DHR. Inspect components before assembly for defects or non-conformance. Maintain a clean and organized work area in accordance with safety and 5S practices. Collaborate with engineering and quality teams to identify assembly issues and propose process improvements. Follow all company policies related to safety, quality assurance, and environmental compliance. Requirements Essential/Preferred Skills: 1-2 years of work experience in electro-mechanical assembly, preferably in sensor instrument manufacturing. High school diploma or GED equivalent. Ability to read and interpret drawings, schematics, and work instructions. Prior experience with hand tools. Strong attention to detail and commitment to product quality. Work Conditions and Physical Requirements: Work performed primarily in an office/manufacturing space. Frequent sitting, standing, bending, and using small tools. May involve handling chemicals used in assembly rooms. Use of PPE (gloves, safety glasses) as required. May require repetitive motions to maintain quality of sensor/analyzer products. Salary Description $18-$20

RH is seeking a skilled and detail-oriented Wood Hardware Assembly Specialist to join our Dennis & Leen/Formations Workshop in Torrance, CA. This role plays an important part in assembling and installing fine hardware on luxury, antique-style furniture pieces. The Wood Hardware Assembly Specialist combines precision craftsmanship with technical expertise, ensuring that every element is secured flawlessly and finished beautifully. In this role, you bring patience, a refined eye for detail, and deep respect for the artistry and heritage that define our timeless designs. YOUR RESPONSIBILITIES Measure, mark, and drill for hardware installation, ensuring precise alignment and secure fit on delicate, high-value furniture Prepare and finish hardware components, including chemical treatments to achieve antique or aged effects that match each piece's design Handle premium, custom, or antique reproduction hardware carefully to avoid scratches or damage during installation Prepare wood surfaces by filling old holes, sanding, and color-matching finishes for seamless results Read and interpret blueprints, drawings, and design specifications to determine correct hardware placement and installation methods Identify wood types, veneers, and finishes to select proper tools and techniques that preserve material integrity Inspect each completed installation for accuracy, function, and aesthetic excellence Maintain and calibrate hand and power tools, including drills, jigs, and measuring devices Troubleshoot and resolve alignment or fitting challenges on unique or vintage furniture pieces Maintain an organized, clean, and safe workspace that protects fine furniture and tools Collaborate with project managers, designers, and other artisans to ensure design intent and quality expectations are met OUR REQUIREMENTS 2+ years of experience in furniture installation, cabinetry, or related fine woodworking disciplines Proficiency with hand and power tools used in precision woodwork and hardware installation Strong manual dexterity and attention to detail when working with delicate or high-value materials Experience interpreting drawings, templates, and measurements accurately Knowledge of traditional furniture construction and antique-style design aesthetics Creative problem-solving skills to address challenges in fitting or restoration projects Professional demeanor and commitment to delivering the highest level of craftsmanship Experience in luxury or custom furniture production preferred PHYSICAL REQUIREMENTS Handles and positions wood furniture components weighing up to 75 lbs. regularly Performs visual inspections and detailed alignment work requiring fine motor control and concentration Stands, bends, and performs repetitive hand movements for extended periods in a workshop environment Works in areas with exposure to dust, adhesives, and finishing materials while adhering to safety and PPE standards Operates precision tools and equipment requiring coordination, balance, and focus

Job DescriptionElectro-Mechanical AssemblersLocation: Chatsworth, CA Duration: 3 - 6 months or longer Schedule: Monday - Friday, 06:00 AM - 2:30 PM Pay Rate: $23.00 - $25.00 per hour (based on experience) Requirements: Experience performing electrical AND mechanical assembly work Ability to read and understand manufacturing drawings and work instructions Ability to speak, read and write in English Must be capable of using standard tools required for electrical/mechanical assembly (crimpers, torque tools, standard hand tools, etc.) Must be able to work in a fast-paced production environment with minimal supervision

Title: Assembly & Test/Tech 'A' - 2nd Shift Company: VACCO Industries Pay Range: $30.17 - $38.01 Assembles pneumatic and hydraulic valves, partially or completely, and conducts a variety of tests on systems, subassemblies, and parts to ensure unit functions according to acceptance procedures or to determine cause of unit failure by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES: * Conducts high pressure and cryogenic testing safely. * Working from blueprints assembles and tests various valves and filters within allotted timeframe and insures conformance with assembly performance tests specifications. * Working from blueprints, work orders, quality control test manuals, performance specifications, schematics to determine testing procedure and equipment to be used. * Calibrates test instruments according to specifications. * Analyzes test results related to the design and test objectives, modifies or adjusts equipment to meet specifications. * Records these test procedures and results, numerical and graphical data and recommendations for changes in product or test method. * Compares results with specifications and documents test data. * Assembles various quiet disc stacks. * Analyzes test results on defective units to determine cause of failure. * Verifies dimensions of mechanical parts using hand-held measuring equipment such as micrometers, indicators and depth mikes. * Verifies dimensions of mechanical parts using hand-held measuring equipment. * Knowledge of chem etching (markings), tube bending and how to clean parts in pre-clean. * Ability to operate and maintain equipment such as Instron machines, AstroMed and mass spectrometer. * Confers with engineers, technicians, production personnel, quality control personnel and others regarding testing procedures and results to resolve problems. * Capable of operating airborne and structure borne noise measurement equipment. QUALIFICATIONS: * Possess interpersonal skills required to build relationships and work in a team environment. * Possess good leadership skills. * Good communication skills both verbal and written. * Ability to use good judgment in decision making and problem solving. * Ability to read and interpret blueprint and schematic drawings. * Working knowledge of standard test equipment i.e. data recorders, pressure transducers and gauges, flow measuring devices, environmental chambers, thermo-coupling, and helium leak detectors. * Proficiency in the use of MS software such as Word, Excel and Outlook. * Basic knowledge of plant operations and processes. EDUCATION and/or EXPERIENCE: Two year certificate from college or technical school; with three (3) years of related experience and/or training; or a High School Diploma or GED Certificate and five (5) years of related experience or equivalent combination of education and experience. Nearest Major Market: Los Angeles

At Reflect, you will be expected to move fast, have a lot of ownership and, most importantly, be able to effect change. If this excites you, we are interested in hearing about your best work and accomplishments across any domain and from any points in your life. About the Role As a Spacecraft Integration Technician, you'll be at the heart of assembling and validating our spacecraft from the ground up. From joining mechanical structures and routing harnesses, to running system-level checkouts and environmental tests, you'll bring each subsystem together into one cohesive vehicle. You'll collaborate closely with design, test, and analysis teams, ensuring that every bolt, connector, and software build works in harmony before we send it to orbit. Responsibilities Lead the mechanical and electrical integration of spacecraft subsystems, from bench assembly to final flight build Develop assembly procedures, test plans, and integration workflows for flight hardware Troubleshoot and debug hardware and software anomalies during integration and test Ensure proper configuration control and documentation at every stage of assembly Collaborate with test engineers on vibration, thermal vacuum, and other environmental testing Own the spacecraft through final integration, guiding it from prototype to launch readiness Ideal Qualifications Extensive experience with system-level integration of aerospace hardware (satellites, launch vehicles, etc.) Proficiency in reading and interpreting mechanical drawings, electrical schematics, and wiring diagrams Hands-on skill set in both mechanical assembly and electrical test/validation (oscilloscopes, DMMs, etc.) Ability to navigate fast-paced integration schedules and pivot when encountering unexpected challenges Familiarity with spacecraft environmental testing protocols and requirements Even if you don't meet 100% of the above qualifications, we are likely still interested in hearing from you. Hiring exceptional individuals is our #1 priority, and we believe that exceptional people often have highly unusual backgrounds. We are also interested in carving out unique roles for unconventional people that we are excited about working with. Benefits Reflect Orbital's success will hinge on our team, which is why our compensation and benefits plan is designed to reward our employees and support their families as generously as we're able. Broad choice of medical/dental/vision coverage, Reflect covers 100% of each base-policy Access to HSA, FSA, and 401K Unlimited paid time off, two-weeks per year encouraged Healthy lunches provided daily Equal Opportunity Reflect Orbital is an Equal Opportunity Employer; employment with Reflect Orbital is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. More about Reflect Orbital: Learn more about our team here.

About Our Client: Our client, a Fortune 500 Medical Device company, is recognized as one of the “World's Best Workplaces” and a “Best Workplace for Diversity” by Fortune Magazine! This company has climbed to the top, gaining a reputation for both excellence and satisfaction and is hiring individuals who are self-motivated, results driven, and take pride in the impact their work has on patients and healthcare professionals. Key Responsibilities: Supporting and assisting engineers in designing, developing, producing, and testing components and equipment. Preparing detailed technical drawings, schematics, and layouts to support engineering projects. Conducting materials testing, analyzing results, and documenting findings. Performing equipment maintenance, calibration, and mechanical/electrical repairs. Monitoring and testing prototypes, models, and products under development. Writing technical reports, identifying issues, and suggesting corrective solutions. Collaborating with engineers and cross-functional teams to resolve technical problems. Operating, troubleshooting, and maintaining complex instruments, gauges, and testing equipment. Qualifications: Technical training or hands-on experience preferred. Demonstrating experience with complex instruments, testing equipment, and gauges. Applying technical troubleshooting skills to mechanical and electrical systems. Utilizing attention to detail and problem-solving to support engineering projects. Showing knowledge of CAD software or other engineering tools. Applying familiarity with manufacturing processes and product development cycles. Demonstrating effective communication skills in documenting and presenting technical findings. NO C2C CANDIDATES Interested Candidates please apply on our website at https://jobs.jblresources.com. For more information about our services and great opportunities at JBL Resources, please visit our website: https://www.jblresources.com. JBL Resources is proud to have earned the reputation of being a premier provider of top talent professionals in the fields of engineering, human resources, logistics, operations, and supply chain management. As specialists in both permanent placement and contract services, our mission is to help companies and individuals become all they were created to be. **JBL is an Equal Opportunity Employer and E-Verify Company

Spacecraft represent the most pressing unmet need across the entire aerospace industry. As more launch vehicles come online and the cost to orbit decreases, more companies launching payloads to space continue to emerge. For the first time in history, this influx of payload companies combined with reduced launch costs has resulted in a massive increase in need for commercial spacecraft platforms, known as satellite buses. These buses hold the payloads of our customers and are flown on launch vehicles. Apex manufactures these satellite buses at scale using a combination of software, vertical integration, and hardware that is designed for manufacturing. Our spacecraft enable the future of society: ranging from earth observation to communications and more. We'd love for you to join us on our mission of providing humankind access to the galaxy beyond our planet. About the Role Apex Space is seeking a highly skilled and experienced Spacecraft Technician to join our dynamic team. As a Spacecraft Technician, you will play a critical role in the assembly, integration, and testing of our spacecraft. Your expertise in aerospace structures, avionics, and harnessing will be essential in ensuring the successful development and deployment of our advanced space systems. Responsibilities: Perform assembly, integration, and testing (AIT) activities for satellite and spacecraft development projects, following engineering specifications, procedures, and safety protocols. Conduct structural assembly and integration tasks, including component installation, mechanical fastening, bonding, and precision alignment. Integrate avionics systems, including electronic components, sensors, and wiring harnesses, ensuring proper connections, routing, and functionality. Collaborate closely with engineers and other technicians to troubleshoot and resolve technical issues during assembly and integration activities. Perform system-level functional tests, including electrical continuity, power distribution, communication, and sensor verification. Utilize precision measurement tools and equipment to ensure adherence to dimensional requirements and alignment tolerances. Participate in environmental testing, such as thermal vacuum, vibration, and shock testing, to validate satellite and spacecraft performance and durability. Support the development and maintenance of assembly and integration procedures, work instructions, and quality documentation. Ensure compliance with quality standards, industry best practices, and safety regulations throughout the assembly and integration process. Maintain accurate records of assembly activities, test results, and any anomalies or discrepancies encountered. Contribute to the continuous improvement of assembly and integration processes, recommending and implementing efficiency enhancements and quality improvements. Stay updated with the latest advancements and best practices in satellite and spacecraft development and testing methodologies. Requirements: U.S. Person status is required as this position needs to access export-controlled data. Minimum 5+ years of experience in satellite or spacecraft assembly and integration, specifically in aerospace structures, avionics integration, and harnessing. Proficiency in precision assembly techniques, including mechanical fastening, bonding, and alignment. Strong understanding of aerospace electrical systems, avionics, and wiring harnesses. Experience in conducting system-level functional tests and troubleshooting electrical and mechanical systems. Familiarity with environmental testing methods, such as thermal vacuum, vibration, and shock testing. Working knowledge of precision measurement tools and equipment used in satellite and spacecraft assembly and integration. Familiarity with quality standards and processes related to aerospace manufacturing. Ability to interpret engineering drawings, specifications, and technical documents. Excellent attention to detail, with strong problem-solving and analytical skills. Ability to work effectively in a team environment, collaborating with engineers and technicians. Strong commitment to safety, always adhering to safety protocols and guidelines. Excellent communication skills, with the ability to effectively convey technical information to team members and stakeholders. Why Join Apex? Apex believes in creating a work environment that you look forward to embracing every day. Our employees love working at Apex, and we want you to love it too. We're a fast-growing startup backed by $200M in Series D funding, and we invest heavily in our people from day one. What We Offer For Full-time Employees: Shared upside: Receive equity in Apex, letting you benefit from the work you create Best-in-class healthcare: 100% company-paid medical, dental, and vision for you and your dependents, plus $100k life insurance at no cost Comprehensive PTO package to reset and recharge - starting at 15 days vacation, growing to 20+ days annually, plus 10 paid holidays Competitive 401(k) plan with generous matching - 100% match on first 3%, 50% on next 2% 8 weeks paid parental leave plus childcare reimbursement up to $350/day for work-related travel Daily catered lunch and unlimited snacks to keep you fueled throughout the day Vibrant community: Monthly office BBQs, pickleball tournaments, run club, and social gatherings for you and your family Your dream desk setup and all the tools you need to be your most productive self World-class Playa Vista office with EV chargers, with the benefit of in-person collaboration with amazing coworkers and flexibility to integrate work and life Real impact opportunity: Work alongside experts from aerospace, new space, and other cutting-edge industries to make a lasting difference Ready to join a team where your contributions matter and your future is bright? Let's build something extraordinary together. Equal Opportunity Employer Apex Technology, Inc. is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Candidates and employees are always evaluated based on merit, qualifications, and performance. We will never discriminate on the basis of race, color, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status.

**Be visionary** Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. **Job Description** Teledyne Imaging Sensors is an integral member of the new Digital Imaging Segment of Teledyne Technologies. Imaging Sensors provides advanced imaging solutions for a variety of customers, including the DoD, NASA, prime system integrators, and commercial customers. In the civilian space arena, Teledyne sensors are the most advanced sensors on board the Hubble space telescope, and they are also found on board the majority of NASA space probes and ground based telescopes. In the DoD arena, Teledyne sensors are integrated into several major systems for persistent surveillance, chemical detection, and target identification, among others. We are looking for an **Assembly and Test Technician** to join our Space product assembly team! The Assembly and Test Technician works in a cleanroom environment, performing micro-electronics assembly and soldering for production PCBA's, cables, interconnects and camera assemblies. **Your duties would include:** + Performing a wide variety of electrical/mechanical product assembly operations on components, assemblies or sub-assemblies by studying assembly instructions and following blueprint specifications and schematics + Populating PCB's from Work Instructions, Assembly Drawings and Bills of Material, to include Board Mount, soldering and inspection + Assembling detailed and complex components by positioning parts and sub-assemblies to required standards such as J-STD-001/IPC 610 **Required skills include:** + Ability to meet/exceed production schedules and deadlines according to quality standards + Ability to work overtime and weekends as needed + Ability to work in Cleanrooms + Ability to read simple assembly drawings + Knowledge of ESD (Electrostatic discharge) procedures + Basic computer skills, including Microsoft Office + Ability to multi-task and work with general instruction on daily activities **Required Education and Experience:** + HS Diploma or equivalent, plus 3-5 years of relevant work experience + Experience with soldering and mechanical assembly + Experience cleaning PCB's and assemblies throughout process and after completion + Experience maintaining logs, paperwork and forms accurately, consistent with company policy and practices + Experience and certification to J-STD-001, Space Addendum preferred **Citizenship Requirements:** + Due to the type of work at the facility and certain access restrictions, successful applicants must be a U.S. Citizen **Ready to join our team? Apply today!** **_What can Teledyne offer YOU?_** A Competitive Salary & Benefits Package Excellent Health, Dental, Vision, and Life insurance plans as of First Day Paid Vacation and Sick Time Paid Holidays 401(k) Eligibility with Company Match Employee Stock Purchase Plan Educational Tuition Reimbursement Employee Fun Events throughout the year **Salary Range:** $42,800.00-$57,100.000 **Pay Transparency** The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, education/training, work experience, key skills, and type of position. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws. You may not realize it, but Teledyne enables many of the products and services you use every day **.** Teledyne provides enabling technologies to sense, transmit and analyze information for industrial growth markets, including aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, energy, medical imaging and pharmaceutical research.

Honda Racing Corporation USA, a leader in motorsports racing, is seeking several highly organized and detailed oriented Engineers, Technicians and CNC programmer/machinist to joins its racing program in Santa Clarita, CA: Chassis Development Engineer: Test, modify, and evolve hardware systems on race cars and track-focused road cars. Validate durability and performance against technical targets. Report lessons learned and document failures; manage problem resolution. Analyze logged data to identify root causes and devise countermeasures. Collaborate with designers and manage 3rd parties for design changes. Execute testing of countermeasure parts and new vehicle hardware updates. Specify instrumentation, perform data analysis, and write development reports. Innovate new testing tools and methods for track and rig tests. Development Engineer: Create development plans for concepts and components. Oversee full product life cycle from concept to production. Execute required tests and validations to meet project goals. Quality Engineer: Quality Control: Develop inspection protocols, validate measurement equipment. New Product Introduction & Corrective Actions: Lead cross-functional troubleshooting. Non-Conformance Management: Review issues, manage tooling calibration. Advanced Product Quality Planning: Conduct first article inspections, process validation. Data Analysis & Continuous Improvement: Generate reports, plan Six Sigma activities. Engine Dyno Technician: Set up/install/remove engines in test cells, configure instrumentation. Execute dyno tests, maintain equipment, review data, and report issues. Automotive Mechanics/Technicians: Build/rebuild racing chassis and hybrid systems. Perform quality checks, assembly, teardown, and inspection. Train new associates and support race car performance objectives. CNC Programmer/Machinist: Program CNC machines using MasterCam for high-performance engine components. Design fixtures/tooling and manage CNC setup and operation.

Spacecraft represent the most pressing unmet need across the entire aerospace industry. As more launch vehicles come online and the cost to orbit decreases, more companies launching payloads to space continue to emerge. For the first time in history, this influx of payload companies combined with reduced launch costs has resulted in a massive increase in need for commercial spacecraft platforms, known as satellite buses. These buses hold the payloads of our customers and are flown on launch vehicles. Apex manufactures these satellite buses at scale using a combination of software, vertical integration, and hardware that is designed for manufacturing. Our spacecraft enable the future of society: ranging from earth observation to communications and more. We'd love for you to join us on our mission of providing humankind access to the galaxy beyond our planet. About the Role Apex Space is seeking a highly skilled and experienced Spacecraft Technician to join our dynamic team. As a Spacecraft Technician, you will play a critical role in the assembly, integration, and testing of our spacecraft. Your expertise in aerospace structures, avionics, and harnessing will be essential in ensuring the successful development and deployment of our advanced space systems. Responsibilities: * Perform assembly, integration, and testing (AIT) activities for satellite and spacecraft development projects, following engineering specifications, procedures, and safety protocols. * Conduct structural assembly and integration tasks, including component installation, mechanical fastening, bonding, and precision alignment. * Integrate avionics systems, including electronic components, sensors, and wiring harnesses, ensuring proper connections, routing, and functionality. * Collaborate closely with engineers and other technicians to troubleshoot and resolve technical issues during assembly and integration activities. * Perform system-level functional tests, including electrical continuity, power distribution, communication, and sensor verification. * Utilize precision measurement tools and equipment to ensure adherence to dimensional requirements and alignment tolerances. * Participate in environmental testing, such as thermal vacuum, vibration, and shock testing, to validate satellite and spacecraft performance and durability. * Support the development and maintenance of assembly and integration procedures, work instructions, and quality documentation. * Ensure compliance with quality standards, industry best practices, and safety regulations throughout the assembly and integration process. * Maintain accurate records of assembly activities, test results, and any anomalies or discrepancies encountered. * Contribute to the continuous improvement of assembly and integration processes, recommending and implementing efficiency enhancements and quality improvements. * Stay updated with the latest advancements and best practices in satellite and spacecraft development and testing methodologies. Requirements: * U.S. Person status is required as this position needs to access export-controlled data. * Minimum 5+ years of experience in satellite or spacecraft assembly and integration, specifically in aerospace structures, avionics integration, and harnessing. * Proficiency in precision assembly techniques, including mechanical fastening, bonding, and alignment. * Strong understanding of aerospace electrical systems, avionics, and wiring harnesses. * Experience in conducting system-level functional tests and troubleshooting electrical and mechanical systems. * Familiarity with environmental testing methods, such as thermal vacuum, vibration, and shock testing. * Working knowledge of precision measurement tools and equipment used in satellite and spacecraft assembly and integration. * Familiarity with quality standards and processes related to aerospace manufacturing. * Ability to interpret engineering drawings, specifications, and technical documents. * Excellent attention to detail, with strong problem-solving and analytical skills. * Ability to work effectively in a team environment, collaborating with engineers and technicians. * Strong commitment to safety, always adhering to safety protocols and guidelines. * Excellent communication skills, with the ability to effectively convey technical information to team members and stakeholders. Why Join Apex? Apex believes in creating a work environment that you look forward to embracing every day. Our employees love working at Apex, and we want you to love it too. We're a fast-growing startup backed by $200M in Series D funding, and we invest heavily in our people from day one. What We Offer For Full-time Employees: * Shared upside: Receive equity in Apex, letting you benefit from the work you create * Best-in-class healthcare: 100% company-paid medical, dental, and vision for you and your dependents, plus $100k life insurance at no cost * Comprehensive PTO package to reset and recharge - starting at 15 days vacation, growing to 20+ days annually, plus 10 paid holidays * Competitive 401(k) plan with generous matching - 100% match on first 3%, 50% on next 2% * 8 weeks paid parental leave plus childcare reimbursement up to $350/day for work-related travel * Daily catered lunch and unlimited snacks to keep you fueled throughout the day * Vibrant community: Monthly office BBQs, pickleball tournaments, run club, and social gatherings for you and your family * Your dream desk setup and all the tools you need to be your most productive self * World-class Playa Vista office with EV chargers, with the benefit of in-person collaboration with amazing coworkers and flexibility to integrate work and life * Real impact opportunity: Work alongside experts from aerospace, new space, and other cutting-edge industries to make a lasting difference Ready to join a team where your contributions matter and your future is bright? Let's build something extraordinary together. Equal Opportunity Employer Apex Technology, Inc. is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Candidates and employees are always evaluated based on merit, qualifications, and performance. We will never discriminate on the basis of race, color, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status.

AnySignal is a startup whose mission is to usher in the next generation of RF products and services. For the most demanding space and defense missions, AnySignal provides a flexible platform with world-class performance that is easy to deploy, monitor, purchase, and upgrade. Our team has a diverse range of backgrounds that cover cloud computing to artificial intelligence, communications and sensing, embedded systems, and much more. About the Role We are seeking a detail-oriented, hands-on Assembly & Test Technician to join our fast-growing production team. You will play a key role in assembling, testing, and preparing our hardware systems for deployment. This role is ideal for someone who enjoys working with mechanical and electronic components, is eager to learn, and thrives in a dynamic, high-precision environment. Soldering expertise is a plus but not required - we value precision, care, and adaptability.What You'll Do Assemble mechanical and electronic components using tools (including torque wrenches) following detailed procedures. Apply staking materials for stability. Use our production tracking software to track builds and workflow. Execute basic test scripts and bash commands on hardware systems. Record, document, and communicate test results clearly and accurately. Collaborate with engineers to troubleshoot and resolve assembly or test issues. Bonus (Not Required) Soldering experience (we'll provide training) and experience handling sensitive PCSs. Basic understanding of electronic debugging or electrical engineering concepts. Prior experience in hardware production environments (aerospace, medical, RF, or similar). Why Join AnySignal?- Work on groundbreaking hardware systems for space and aerospace.- Build meaningful, hands-on skills with the support of a passionate, experienced team.- Receive competitive pay and opportunities for growth.- Be part of a fast-moving startup where your contributions matter. AnySignal values and fosters an inclusive, accessible environment, where all employees and customers feel respected, supported and able to participate. We welcome applications from: women, Aboriginal persons, persons with disabilities, ethnic minorities, visible minorities, veterans, people who identify as LGBTQIA2S+ and others who may contribute to diversification in our environment. Should you have a need for accommodation, AnySignal will endeavor to meet your accommodation needs. At any stage of the recruitment and selection process you may make your needs for accommodation known through contacting our team, in confidence, by email to: *********************. We aim to provide equal access to all applicants with disabilities, please do not hesitate to contact us about accommodations.

Job Description Furniture Assembly Tech CA Flexible, Part-Time Opportunity to service Your Local Office Supply Store Do you have experience assembling furniture at Office Supply Stores or similar organizations doing handy work? We want you on our team! SPAR is seeking skilled assemblers to perform on-site service and furniture assembly in Office Supply Stores, as well as in-home assembly projects. Are you great with your hands? Do you enjoy assembling furniture and seeing the finished product of your work? If you have experience as an assembler, especially at Office Supply Stores, we want YOU on our team! Why You'll Love This Job: Great Pay: $16.75 - $18/hour for showroom service work Get Paid Fast: With DailyPay, you can work today and get paid tomorrow! Free enrollment required Consistent Work: Part-time, on-going projects servicing Office Supply Stores & customers in-home furniture assembly purchases Work Independently: Enjoy the flexibility of working on your own while still being part of a great team What You'll Be Doing: Assembling Ready-to-Assemble (RTA) Furniture in retail showrooms and customer homes Ensuring displays are set up properly and well-maintained Following plan-o-grams and completing customized category resets Reporting your completed work on the same day via our easy online system What You Bring to the Team: Previous merchandising or commercial furniture assembly experience (Office Supply Stores experience is a plus!) Ability to read instructions and assemble furniture efficiently Can lift up to 50 lbs. and stand for extended periods Reliable transportation (some travel may be required) Your own basic tools (drills, screwdrivers, etc.) Internet access and active email for reporting Be Part of Something Bigger! At SM&A, we provide essential services to top retailers and manufacturers across the U.S. Our work keeps retail moving forward, and we need talented individuals like YOU to help make it happen. Ready to build a career? Apply today! We Are an Equal Opportunity Employer SPAR provides Equal Employment Opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, SPAR complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. SPAR expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of SPAR's employees to perform their job duties may result in discipline up to and including discharge.

At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: Work in an entrepreneurial and dynamic environment with a chance to make an impact. Develop lasting relationships with great people. Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. Engineering Technician IIIThe Engineering Technician III will be working on the production floor with plant technicians at Niagara facilities around the country. Tasks include performing diagnostic visits on production lines in preparation for an annual rebuild/overhaul, taking part, on a team, in those line rebuilds/overhauls, and providing support to those plants that are in need of help. Essential Functions Providing Plant Support for Niagara Facilities Provide aid and expertise to plant maintenance teams and internal Engineering Technicians Aid in any needed repairs on production machinery, as necessary Provide information on needs for long term success of facilities, including but not limited to the Focus Line Process Diagnostic Visits Identify problems and wear & tear on machine centers for every line. Perform root cause analysis for corrective actions Develop suggestions for parts and labor needed during annual rebuilds/overhauls Annual Rebuilds/Overhauls Work on teams of 4, along with plant maintenance teams Prepare machine centers to repair/rebuild problems found during Diagnostic Visits Training Attend machine center specific master class training as a baseline Assist with evaluation of Engineering Technicians skills on machine centers via a written assessment card Assist with the training of Engineering Technicians thru an OJT style format Suggest machine center specific training modules for the Engineering Technicians that are needed above and beyond the OJT system Assist with the further development and implementation of the OJT style training for our group Travel Requirements: Approximately 75% of the year Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without prior notice. Qualifications Minimum Qualifications: 4 Years - Experience in Field or similar manufacturing environment 4 Years - Experience in Position 2 Years - Experience managing people/projects *experience may include a combination of work experience and education Preferred Qualifications: 6 Years- Experience in Field or similar manufacturing environment 6 Years - Experience working in Position 4 Years - Experience managing people/projects *experience may include a combination of work experience and education Competencies Some Proficiency in, but not limited to: Microsoft Office Applications - Word, Excel, Access, PowerPoint, Outlook, Visio, etc. Able to work with others Often placed in teams of 4, or occasionally more. Often working in conjunction with plant maintenance staff Strong analytical and problem solving skills Self-Motivated with a proven record of taking the initiative Able to work with minimal supervision Must exhibit leadership capability when working both alone and with teams in order to complete projects safely and in a timely fashion. Detail-oriented with excellent verbal and written communication skills Able to execute tasks in a very dynamic and ever-changing environment Exercise sound judgment and ability to work effectively with a diverse workforce Required to be considered an SME (Subject Matter Expert) in a given machine center that is pertinent to Niagara Bottlings business needs. This position embodies the values of Niagara's LIFE competency model, focusing on the following key drivers of success: Lead Like an Owner Makes safety the number one priority Keeps alert for safety issues and escalates immediately Effectively prioritizes tasks based on department goals Shows respect to others and confronts interpersonal issues directly Prioritizes resolution of customer issues effectively Responds promptly and honors commitments to internal and external customers InnovACT Makes recommendations to continuously improve policies, methods, procedures, and/or products Demonstrates adaptability by reacting appropriately to unexpected changes in situations or circumstances Increases performance through greater efficiency Find a Way Seeks to develop technical knowledge through learning from other experts Understands interdepartmental impact of individual decisions and actions Seeks solutions rather than placing blame Empowered to be Great Consistently looks for ways to improve one's self through growth and development opportunities Communicates clearly and promptly up, down, and across Communicates effectively to manage expectations Education Minimum Required: Associate's Degree in Engineering or other related field Preferred: Bachelor's Degree in Engineering or other related field Certification/License: Required: N/A Preferred: N/A Foreign Language Required: None Required Preferred: None Required Typical Compensation Range Pay Rate Type: Hourly$28.90 - $41.91 / Hourly Benefits *********************************************** * *Los Angeles County applicants only** Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and any other applicable local and state laws. Any employment agency, person or entity that submits a résumé into this career site or to a hiring manager does so with the understanding that the applicant's résumé will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.

Job DescriptionAn electro-assembler will be required to wire equipment based upon electrical diagrams. The assembler will need to wire and assemble precisely, neatly, and with organization. Qualifications: Experienced in working with industrial control assemblies Read and understand electrical diagrams Mechanically inclined. Point to point wiring, high and low voltage Electrical component installation experience Equipment panel wiring experience Work independently and with a team Good communication skills Excellent attention to details Potentially some soldering Note: Applicants will be tested on their abilities FULL TIME: Rate: $20-$23/hour Schedule: Mon-Thurs, 6am-4:30pm