Assembly technician jobs in West Valley City, UT

Performs complex assembly assignments in support of GEHC product manufacturing. Personally accountable to the people around them, through learning and adapting in a collaborative, team-based production line environment. Constantly pursuing quality and continuous improvement. Driven to improve the organization through a growth mindset and continuous learning. Passionate about producing imaging devices that save lives. Job Description Role Summary: Performs complex assembly assignments in support of GEHC product manufacturing. Personally accountable to the people around them, through learning and adapting in a collaborative, team-based production line environment. Constantly pursuing quality and continuous improvement. Driven to improve the organization through a growth mindset and continuous learning. Passionate about producing imaging devices that save lives. Essential Responsibilities: * Assemble OEC 3D and MD C-arm imaging devices by thoroughly following work instructions * Accurately record tool information within GE Systems * Maintain daily production output * Provide strong individual contributions to team goals * Interface with other departments to ensure orderly flow of product * Execute training plans * Identify and report defects in assigned area * Perform basic root cause analysis and problem resolution * Utilize basic technical communications throughout the process for production * Provide evaluation/constructive feedback in the development of internal and external engineering, manufacturing, or service documentation * Participate in LEAN process improvement activities to improve quality, process flow, and cycle or TAKT times * Comply with EHS regulations and policies and escalate concerns/suggestions to leadership * Engage in daily 5s activities * Participate in quality control inspections of sub-assemblies and final product * Perform other duties such as quality activities, training sessions, and employee activities Qualifications/Requirements: * High school diploma/GED or local equivalent with 1 year of manufacturing experience or 3 years of manufacturing experience. * Must be able to physically lift (floor to waist, waist to crown level, and horizontally) * Lift and carry up to 50 lbs. * Must be able to perform frequent simple grasping, firm grasping, fine manipulation, neck rotation, and neck flexion frequently throughout the workday * Must be able to twist, push/pull, reach at, above and below shoulder height frequently throughout the workday * Must be able to frequently stoop, bend, squat and kneel throughout the workday * Must be able to stand/sit continuously throughout the day * Must be able to ascend/descend/balance occasionally on portable step stool Desired Characteristics: * Associate's degree in manufacturing, Engineering, or Technology related fields * Experience in medical manufacturing or other highly regulated industry preferred * Local candidates will be given preference * Demonstrated basic computer skills and ability to navigate online instructions * Black belt in Lean Six Sigma We will not sponsor individuals for employment visas, now or in the future, for this job opening. Additional Information GE HealthCare offers a great work environment, professional development, challenging careers, and competitive compensation. GE HealthCare is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE HealthCare will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). While GE HealthCare does not currently require U.S. employees to be vaccinated against COVID-19, some GE HealthCare customers have vaccination mandates that may apply to certain GE HealthCare employees. Relocation Assistance Provided: No

Provide general maintenance, repair and support to assigned service calls. Demonstrate the company's core values of respect, honesty, integrity, diversity, inclusion and safety.Based in Salt Lake City, Utah, Smith's Food and Drug merged with The Kroger Company in 1998. Today, we're proudly serving Smith's customers in over 140 stores throughout Utah, Nevada, New Mexico, Arizona, Montana, Idaho and Wyoming. As part of the Kroger family of companies, we take pride in bringing diverse teams with a passion for food and people together with one common purpose: To Feed the Human Spirit. With a history of innovation, we work tirelessly to create amazing experiences for our customers, communities AND each other, with food at the heart of it all. Here, people matter. That's why we strive to provide the ingredients you need to create your own recipe for success at work and in life. We help feed your future by providing the value and care you need to grow. If you're caring, purpose-driven and hungry to learn, your potential is unlimited. Whether you're seeking a part-time position or a new career path, we've got a fresh opportunity for you. Apply today to become part of our Smith's family! What you'll receive from us: The Kroger Family of Companies offers comprehensive benefits to support your Associate Well-Being, including Physical, Emotional, Financial and more. We'll help you thrive, with access to: A wide range of healthcare coverage, including affordable, comprehensive medical, dental, vision and prescription coverage, through company plans or collective bargaining agreement plans. Flexible scheduling in full- and part-time roles with paid time off, including holiday and sick pay based on eligibility and length of service. Emotional and financial support with free counseling through our Employee Assistance Program and free, confidential financial tools and coaching with Goldman Sachs Ayco. Valuable associate discounts on purchases, including food, travel, technology and so much more. Up to $21,000 in tuition reimbursement over your career, through our industry-leading Continuing Education program. Vast potential for growth, through an abundance of industry-leading training programs and diverse career pathways. For more information about benefits and eligibility, please visit our Benefits Page ! Minimum High school diploma or equivalent 3-5 years' proven electrical/mechanical maintenance experience and satisfactory overall performance Ability to use manufacturer interface software Must hold and maintain a valid driver's license Basic knowledge of Microsoft Office Ability to work a flexible schedule, including nights, weekends, holidays and overtime when necessary Desired Experience reading engineering drawings, manuals and schematics EPA Type 2 Certification Supervisory experience Drive independently to stores on a daily basis as assigned. Perform various preventive maintenance tasks and procedures to building and equipment. Troubleshoot issues and repair equipment. Assist in performing component replacement. Navigate and investigate electronic controls interfaces. Maintain an accurate and organized inventory of parts. Operate equipment, vehicles, powered industrial trucks and aerial lifts safely. Clean and maintain company service vehicles, if one is assigned. Orally communicate with store personnel regarding the proper use of equipment as it relates to repeat calls and overtime. Utilize company email system to send and receive messages. Properly complete all repair, labor, parts purchasing and usage documentation in a timely fashion. Comply with all department and company policies and procedures. Assist other skilled trade technicians in repairs as requested. Audit registered store equipment identification lists. Physical demands include, but are not limited to, high aptitude for standing and walking endurance, sitting while driving to various stores, lifting and carrying up to 70 pounds, pushing and pulling climbing ladders of various types, bending, squatting, and kneeling, and working in different temperatures inside and outside the store. Must be able to perform the essential functions of this position with or without reasonable accommodation.

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: NoneTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman Defense Systems is seeking a Manufacturing Technician 4. This position will be located in Ogden, UT and will support the SDS Division at the Ogden Manufacturing Facility. This role may offer a competitive relocation assistance package. What You'll Get To Do: Align parts on jigs using templates and fixtures. Read and understand blueprints. Translate blueprints into fabrications of structural assemblies to include precision drilling, countersinking, and the use of calibrated tools Perform such minor part-fitting operations as filing, sawing, burring, crimping, trimming, framing, riveting, drilling, and reaming. May monitor and verify quality in accordance with statistical process or other control procedures. Measure parts with precision tools such as, micrometers and calipers to verify dimensions. Daily usage of manufacturing shop controls and systems Use of appropriate PPE when working on the shop floor Recommend and implement continuous improvement activities in production methods, equipment performance and team effectiveness. Record and report existing structural discrepancies found during modification As a full-time employee of Northrop Grumman, you are eligible for our robust benefits package including: Medical, Dental & Vision coverage 401k Educational Assistance Life Insurance Employee Assistance Programs & Work/Life Solutions Paid Time Off Health & Wellness Resources Employee Discounts This positions standard work schedule is a 9/80. The 9/80 schedule allows employees who work a nine-hour day Monday through Thursday to take every other Friday off. You Will Bring These Qualifications: High school diploma or equivalent is required with a minimum of 6 years of hands-on experience in an engineering or technical role. 2 years of experience troubleshooting and practical knowledge of mechanical and electrical systems. 2 years of experience interpreting technical schematics, drawings, and maintenance manuals. Strong problem-solving abilities and an aptitude for working in dynamic environments. Excellent communication skills and the ability to work both independently and collaboratively. These Qualifications Would Be Nice to Have: Associate or Bachelor's degree in Engineering Technology, Mechanical Engineering, or a related field is preferred. Certifications or technical training in relevant engineering technologies. Experience in a manufacturing, industrial, or facility maintenance environment. Additional competencies in areas such as PLC programming, instrumentation, or quality assurance. IPC-610, IPC-620, and J-std-001 experience is a plus. Proven ability to mentor junior technicians and support team development. Welding experience is a plus; familiarity with basic welding techniques and safety procedures is beneficial. Primary Level Salary Range: $66,300.00 - $110,500.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Come join Moxtek's team in Orem as a full-time X-Ray Production Assembler. You will play a crucial role in producing high-quality X-ray components. This role offers the opportunity to showcase your production skills in a well-organized manufacturing environment. We will reward your efforts to live our core values of communication, accountability, cooperation, innovation, and quality. If you thrive in a professional, team-based atmosphere that values high performance, attention to detail, and continuous innovation, we want you on our team! We offer a competitive pay of $18-20 per hour (plus shift differential) to start, with a two-year advancement track to move up from there. This onsite position is perfect for those looking to grow their manufacturing career. You will have benefits such as medical, dental, vision, and life insurance; generous 401(k) match; Health Savings Account; paid time off; employee discounts; paid parental leave; tuition reimbursement; and volunteer paid time off. BRING YOUR BEST TO Moxtek We'll rely on you to produce our high-tech X-ray products. You'll perform basic manufacturing processes, like handling small parts, working under a microscope, and conducting visual inspections. You will also do tasks like loading and unloading equipment, collecting test data, and working with various chemicals safely and meticulously. We'll look to you to identify and implement process improvements to enhance efficiency and quality on the production line. Experience the thrill of solving problems and delivering excellence in manufacturing that extends across the world! To excel as an X-ray Production Assembler at Moxtek, you should have a keen attention to detail and strong manual dexterity to manipulate small parts effectively. Prior production experience helps and solid English reading and speaking skills are required. If you have these skills and love to learn and collaborate, we encourage you to apply. You're just who we want!

Who We Are Through its global network, Thermon provides safe, reliable and innovative mission critical industrial process heating solutions. Thermon serves the energy, power generation, chemical, food and beverage, commercial, rail and transit and other industries to provide innovative solutions for industrial heating applications by deeply understanding our customers' needs. We specialize in providing complete flow assurance, process heating, temperature maintenance, freeze protection and environmental monitoring solutions. We transfer the WARMTH needed to make life Work. At Thermon, we don't just create jobs; we develop careers. Thermon has become a global leader in industrial heating due, in no small part, to our employees' hard work and dedication. To help foster those employees, we've created a company culture that encourages our values of Care, Commit and Collaborate. We are currently recruiting for an Assembler Overview As an Assembler you will be responsible for assembling heated blankets by reading and interpreting technical drawings, assembling components, and performing quality checks to ensure that the heated blankets meet specified standards. Key Responsibilities and Accountabilities include * Assemble heated blankets according to technical drawings and specifications. * Use hand tools, power tools, and specialized equipment to fit and secure components. * Install heating elements, sensors, and insulation materials. * Inspect assembled products for defects and ensure compliance with quality standards. * Perform functional tests on heating elements and electronic components. * Report any assembly issues or discrepancies to the supervisor. * Read and interpret blueprints, schematics, and work orders. * Follow detailed assembly instructions and protocols. * Understand and apply industry standards and safety regulations. * Maintain accurate records of assembly processes and quality checks. * Complete production logs and other required documentation. * Perform routine maintenance on assembly tools and equipment. * Keep work area clean and organized. * Work closely with the production team to meet daily and weekly production targets. * Communicate effectively with supervisors and team members about production status and any issues that arise. * Assists other areas if ahead on the schedule. * Complete any other tasks assigned by management or Production Floor Manager. Key Characteristics, Competencies and Skills * Ability to work in a fast pace environment * Perform repetitive work on a manufacturing team * Follow procedures and policies * Work overtime when necessary * Make suggestions and implement ideas to become more efficient * Reliable * Problem solver * Show initiative. * Flexible in moving to work to another area when needed. * Work on machinery if needed. * Be a team player * Notifying your line lead of any issues that prevent you from performing your job. * Being back on time from scheduled breaks. * Being on time to team huddles after scheduled breaks. * Being flexible to train and work in other areas. * Clean up workstation/work area during clean up time. * Must be able to understand and communicate in English. Physical Demands * Transporting blankets as needed. * Standing for extended periods (9+ hours). * Lifting loads weighing up to 50 lbs. Qualifications * High School and or trade school is a plus but not required. * One year of related experience in a fast-paced business environment is a plus.

Job DescriptionBenefits: Bonus based on performance Company car Competitive salary Paid time off Training & development Benefits/Perks Health benefits PTO and paid holidays Work attire paid for by the company Paid training Potential performance-based compensation opportunities Growth and advancement opportunities Year-round work We Provide Comprehensive Training and Advancement Opportunities For You! At Fitness Machine Technicians, we take pride in offering the industry's only Certified Fitness Equipment Technician Training Program, meticulously designed to empower technicians like you. Our program stands out by providing the most comprehensive training available, equipping participants with the skills necessary for maintenance and repair across all equipment types and manufacturers. We utilize a variety of effective training methods, including: In-person instruction Hands-on experience Video modules Field training With this unparalleled training, you gain a significant advantage over the competition, ensuring that you provide accurate repairs and exceptional service to our valued customers. But that's not allwe are committed to helping you rise in your career, so we offer a clear career path with multiple opportunities for growth and self-empowerment. Upon certification, you can become a Certified Master Technician by completing the required repairs and preventive maintenance services. As a Certified Master Technician, you will gain the potential to train and manage others, while being compensated accordingly for your expertise. When you join our team, you're not just starting a job but embarking on a fulfilling career path that leads to success. Take the first step towards improving your skill set today by joining Fitness Machine Technicians! Job Summary Fitness Machine Technicians is looking for a technician to perform repair and preventive maintenance services for residential and commercial customers. If you are a go-getter this is the job for you! Must be awesome at customer service and quality control. Responsibilities Diagnose, repair, and perform preventive maintenance on various pieces of fitness equipment at customer locations including homes and commercial facilities Identify and report replacement parts needed Assemble and disassemble equipment and perform equipment installations at commercial facilities Complete accurate and thorough customer work order reports using our Field Service Management software Professionally interact with customers to help maintain great client relationships and explain repairs and equipment failures Drive from job to job in a clean and well-organized branded vehicle Daily local travel Occasionally lift heavy equipment Qualifications 3 years of mechanical/electrical aptitude and experience working with hand tools required Experience repairing fitness equipment is a plus but not necessary. Our CFET Training Program will prepare you for the job. Positive attitude, professional appearance, and ability to communicate clearly and professionally with customers and colleagues Ability to use a phone/tablet for scheduling and job reports Valid Driver's License and clean driving record A self-starter with problem-solving skills Ability to work independently and plan, organize, and manage a variety of tasks Applicants must be able to pass a background check High School diploma or equivalent

Benefits: Bonus based on performance Company car Competitive salary Paid time off Training & development Benefits/Perks Health benefits PTO and paid holidays Work attire paid for by the company Paid training Potential performance-based compensation opportunities Growth and advancement opportunities Year-round work We Provide Comprehensive Training and Advancement Opportunities For You! At Fitness Machine Technicians, we take pride in offering the industry's only Certified Fitness Equipment Technician Training Program, meticulously designed to empower technicians like you. Our program stands out by providing the most comprehensive training available, equipping participants with the skills necessary for maintenance and repair across all equipment types and manufacturers. We utilize a variety of effective training methods, including: In-person instruction Hands-on experience Video modules Field training With this unparalleled training, you gain a significant advantage over the competition, ensuring that you provide accurate repairs and exceptional service to our valued customers. But that's not all-we are committed to helping you rise in your career, so we offer a clear career path with multiple opportunities for growth and self-empowerment. Upon certification, you can become a Certified Master Technician by completing the required repairs and preventive maintenance services. As a Certified Master Technician, you will gain the potential to train and manage others, while being compensated accordingly for your expertise. When you join our team, you're not just starting a job but embarking on a fulfilling career path that leads to success. Take the first step towards improving your skill set today by joining Fitness Machine Technicians! Job SummaryFitness Machine Technicians is looking for a technician to perform repair and preventive maintenance services for residential and commercial customers. If you are a go-getter this is the job for you! Must be awesome at customer service and quality control. Responsibilities Diagnose, repair, and perform preventive maintenance on various pieces of fitness equipment at customer locations including homes and commercial facilities Identify and report replacement parts needed Assemble and disassemble equipment and perform equipment installations at commercial facilities Complete accurate and thorough customer work order reports using our Field Service Management software Professionally interact with customers to help maintain great client relationships and explain repairs and equipment failures Drive from job to job in a clean and well-organized branded vehicle Daily local travel Occasionally lift heavy equipment Qualifications 3 years of mechanical/electrical aptitude and experience working with hand tools required Experience repairing fitness equipment is a plus but not necessary. Our CFET Training Program will prepare you for the job. Positive attitude, professional appearance, and ability to communicate clearly and professionally with customers and colleagues Ability to use a phone/tablet for scheduling and job reports Valid Driver's License and clean driving record A self-starter with problem-solving skills Ability to work independently and plan, organize, and manage a variety of tasks Applicants must be able to pass a background check High School diploma or equivalent Compensation: $21.00 - $25.00 per hour Looking for a unique opportunity? Do you want to work at a growth driven and competitive company? Work for the leader in the fitness equipment repair industry? Then, WE WANT YOU! WHO YOU ARE Have mechanical and/or electrical experience (technicians only) Self-starter and highly motivated Can work independently Enjoy engaging with clients WHO WE ARE Leader in residential & commercial exercise repair International brand Competitive Pay Opportunity for advancement Fitness Machine Technicians is committed to delivering the most reliable repair and preventive maintenance services. Prompt customer service, accurate repairs and constant customer communication is the key to our success. Interested? Then join our team!

Job DescriptionProduction Machine Technician Salt Lake City - Proxy Facility • Full-Time • $23-$26/hr - Current Shift Schedule: M-Th 7 AM - 5 PM Join a Team That Builds the Future of Climbing If you love working with your hands, solving mechanical challenges, and being part of a fast-moving shop environment, this is your kind of role. At Vertical Solutions, you'll help create the climbing holds that fuel gyms and inspire climbers everywhere. About Vertical Solutions Vertical Solutions designs, builds, and equips world-class climbing gyms - including The Front Climbing Club. Our team is full of makers, problem-solvers, and community-driven humans who care about craftsmanship and love seeing their work come to life. From carpenters to composite techs, we're united by creativity, precision, and a passion for climbing culture. About the Role As a Production Machine Technician, you'll operate the Composite Material System (CMS) that produces our polyurethane climbing holds. You'll keep production flowing smoothly, maintain critical equipment, and support continuous-improvement practices on the shop floor. This is a hands-on, active role where you'll be part of an energetic team shaping the products used in gyms across the country. What You'll Do Operate and maintain the CMS to pour high-quality polyurethane climbing holds. Clean, service, and disassemble machine components on weekly, monthly, and quarterly schedules. Train teammates on machine use and help support LEAN and 5S shop standards. Track production data, adjust machine variables, and look for ways to improve workflow. Sand, drill, prep, weigh, and finish plastic parts with both hand and power tools. Assist with packing and shipping holds to ensure customers receive perfect product. Troubleshoot equipment issues and follow safety procedures and SOPs at all times. Contribute to a clean, organized, and efficient production environment. What You Bring You might be a great fit if you: Have at least 5 years of combined experience through work, trade school, or higher education. Have manufacturing or construction experience and feel comfortable with industrial equipment. Enjoy repetitive, detail-driven tasks while staying consistent and efficient. Can problem-solve, stay self-motivated, and manage your time well in a busy environment. Thrive in a team setting and show up ready to contribute every day. Hold a valid driver's license. Can safely lift up to 50 lbs., wear PPE, and work around chemicals, dust, and machinery. Care about organization, safety, and systemized workflows. Perks & Benefits Medical, dental, and vision insurance Life, STD, and LTD benefits Accident insurance 401(k) retirement plan Gym membership Discounts on food and merchandise A creative, community-minded workplace with room to grow your skills Join Us! If you're excited to build products that power the climbing world - and you love working with machines, tools, and a motivated production team - we'd love to meet you. Apply today and help us shape the future of climbing holds. We're an equal opportunity employer that celebrates diversity and strives to create an inclusive environment for all.

Reporting to the Manager/Director of Production & Shipping, this position performs the final assembly, test, repair, and replacement of the timeclocks designed and sold by isolved. The incumbent uses NetSuite and various utility PC programs as part of the assembly and tracking operation. Core Job Duties * Pull electronic subassemblies and housing components * Assemble the product following the procedures outlined during the design/development of the product * Receive customer returns * Perform test and evaluation procedures to identify damaged components * Replace damaged components * Other repair activities as directed Minimum Qualifications * Technical training in electronic assembly/repair * Basic soldering skills * Customer service experience * Computer skills with Word/Excel/Outlook/NetSuite * Basic computer networking understanding * High school diploma or equivalent required About isolved isolved is an employee experience leader, providing intuitive, people-first HCM (Human Capital Management) technology. Our solutions are delivered directly or through our partner network to more than five million employees and 145,000 employers - who use them every day to boost performance, increase productivity, and accelerate results while reducing risk. Our HCM platform, isolved People Cloud, seamlessly connects and manages the employee journey across talent management, HR & payroll, workforce management and engagement management functions. No matter the industry, we help high-growth organizations employ, enable and empower their workforce by transforming employee experience for a better today and a better tomorrow. For more information, visit ******************* EEO Statement isolved is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. isolved is a progressive and open-minded meritocracy. If you are smart and good at what you do, come as you are. Disability Accommodation Visit ************************** for more information regarding our incredible culture and focus on our employee experience. Visit ************************* for a comprehensive list of our employee total rewards offerings. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions outlined above.

Responsible for filling, whomping and bagging and boxing/packing pillows according to ATC standards and work assignments. New hired or transferred employees are expected to perform this job to standard within 1 week. PRIMARY RESPONSIBILITIES: Filling Responsible filling shell with fiber, then placing pillow on conveyor to be sewn. And randomly checking weights on QC scales. Whomping & Bagging Responsible for removing completed pillows from conveyor belt, whomping pillows and bagging pillows. Responsible for packing shipping cartons with finished product according to customer specifications. Responsible for accurate carton count, and for affixing appropriate labels onto cartons. Prework Responsible for removing packaging from finished pillows to be re-packaged in a different package. Responsible for making any necessary changes to finished product, and price ticketing bags and pillow shells. Responsible for any changes to components needed prior to production. Safety and Equipment Responsible for careful and safe use of all company equipment and property. Responsible for reporting any equipment problems to immediate supervisor, or the maintenance department. Responsible for performing duties in such a way to ensure the safety of oneself and one's co-workers. Scanning Responsible for accurately reporting finished pillows using hand held scanners. Changeovers Responsible for following production changeover duties in between work orders. ESSENTIAL QUALIFICATIONS: High school diploma or equivalent Basic math skills PHYSICAL DEMANDS: Ability to occasionally carry, push or pull objects weighing up to and including 35 pounds. Able to ambulate or stand for a full shift. Able to operate hand held pallet mover.

Nammo Composition Solutions, is an engineering and composite manufacturing company with more than 20 years of operations in Salt Lake City, Utah. Production Technicians are responsible for assembling and testing manufactured goods. They ensure products are working exactly as intended, and are free of defects or others issues. Production Technicians usually work as part of a larger team, frequently interacting with manufacturing and Quality Assurance personnel. Work Schedule: 1st Shift, 4/10 Schedule, M-TH 6am-4:30pm Primary Responsibilities: • Performs a variety of repetitive operations for the production of composite parts • Operations can include cleaning of molds, operating winding machines, and working with chemicals • Clean molds; use a variety of power tools; cut, clean, and package parts • Places parts in specified relationship to each other • Operates and tends automatic and manual processing equipment • Uses a variety of hand and power tools, jigs and fixtures • Works at different work stations as production needs require • Performs general daily housekeeping and cleaning of equipment and area to ensure safe working conditions. • Ability to read procedures • Be able to write legible for filling out documentation • Other duties as assigned Requirements (Education/Skills/Experience): • 1 or more years of related experience • High School Diploma or general education diploma (GED) • Knowledge of basic measuring equipment, tape measure and calipers • Ability to lift up to 50lbs • Capacity to read and interpret procedures accurately • Be able to write legible and accurately for filling out documentation • Ability to be at work and on time on a regular consistent basis.

At Audio Enhancement, we help empower learning in the classroom every day. We believe in what we do, and how we do it. We take care of each other, exceed our customers' expectations, and build success through partnership, friendship, and trust-with our team members, partners, and customers. Team members who work hard, pursue excellence, and have a positive attitude can expect to grow with us as we grow. At Audio Enhancement, we're looking for “lifers”-members of our Audio Enhancement family who believe in our mission, share our passion, and want to spend their careers making a difference in education. We are currently seeking a full-time Production Technician for our West Jordan office. The Production Technician will be responsible as part of a team for assembling Classroom Sound Systems while carefully maintaining Electrostatic Discharge (ESD) protocol. Duties Include: Carefully following established procedures Assembling electronic components, using a powered drill Use electronic devices to record attendance and assembly related data Perform accurate and timely date entry into our SNAPS system on each job Use hand tools to assemble product Understand and follow ESD protocols Work with printed circuit board assemblies Help clean up and dispose of trash at the end of the day Requirements Exceptional attention to detail Ability to work with minimal supervision Reliable and Accountable 18 years or older Ability to lift a minimum of 20 pounds Can effectively work within a team-based environment Ability to perform repetitive tasks while sitting or standing for long periods of time No prior electronics experience required Compensation and Benefits: Hourly wage is negotiable based on skill level and experience. Competitive benefit package includes medical, dental, and vision insurance, Employer-funded Health Savings Account (HSA), Paid Time Off (PTO), paid holidays, Employer-funded Short Term Disability Insurance, Employer-funded Life Insurance, and matching 401k. Even an exercise room, massage chair, and soda fountain! To learn more about Audio Enhancement, visit ************************ For quick inquiries, contact *****************************

Come be an Employee-Owner of one of the nation's largest producers of metal roofing and siding! We sell, manufacture, build, and distribute metal building components and packages. Since 1988 we've grown to over 13 locations nationwide. We make raving fans of our customers with our “right, on time, every time” commitment. So, who are we looking for? People who “Own It” - Commitment to the customer, the company, and each other: You are customer-focused with an eye for detail. You are reliable. People who “Can Do” - Our Attitude: You are an innovative thinker pursuing continuous improvement. You embrace teamwork. You want to positively make an impact and open to change. People who “Act in Love” - Treats others with humility, respect, kindness, honesty, patience, and self-control. You enjoy giving back to your community. We take great pride in the communities we live in, so we give back with our time and talents. Each year you can take paid time off to support a cause close to your heart. And what will you do? Summary: Provides “Right. On Time. Every Time.” products and customer service, both to external and internal customers, within company standards. Core Functions: • Follows all plant safety procedures and uses all applicable personal protective equipment (PPE). • Holds other team members accountable to follow all safety procedures. • Operates all machinery required following safety guidelines; machinery can include benders, roll formers, wrappers, slitters, shears, forklifts, and other machines as assigned. • Follows all setup procedures and work instructions as documented in the Operations System. • Completes all quality checks as documented; makes adjustments and re-produces product as needed to provide accurate and damage-free product to the customer. • Completes all daily orders in assigned area. • Meets or exceeds area's goals including safety, productivity, scrap, on-time delivery, and accuracy. • Performs daily operator preventive maintenance checks, as assigned. • Reports all machinery issues to Maintenance promptly. • Cleans and resets work area at the end of each shift, including but not limited to sweeping the floor, placing items in the proper storage area, stacking pallets, restocking packaging, and dumping trash. • Accurately updates all records and visual tracking, whether written or electronic (e.g., coil footage, cover sheets). • Cross-trains as directed and is willing to work at any production position in the plant, on an as needed basis. • Participates in monthly inventory. Key Measures of Success: • Ability to operate assigned task and cross-train in at least two additional work tasks. • Demonstrates excellent interpersonal and teamwork skills. • Customer and detailed oriented. • Exhibits a continuous improvement mindset with ability to verbalize ideas for process and work flow improvements. • Ability to read a tape measure, do basic mathematical calculations, and use a calculator. • Ability to learn production operations. • Consistently exhibits and displays the company's values of “Own It. Can Do. Act in Love.” • Own It - Commitment to customer, company, and each other. • Can Do - Team Player, Open to Change, & Pursuing continuous improvement. • Act in Love - Treating others with humility, respectfulness, kindness, honesty, patience, and self-control. Education & Experience: Preferred: • High School diploma or equivalent • Current Certification on Crane and Forklift Physical Demands & Work Environment: The noise level in the work environment and job sites can be loud and in a non-temperature-controlled environment and exposure to outside weather conditions. While performing the core function of this job, the employee is regularly required to talk, walk, hear, stand for long periods of time, and required to lift to 55 lbs. This position is primarily working around machinery with moving parts, working around moving objects or vehicles. The employee is frequently required to use hands to finger, handle or feel, reach/pull/push/grab with hands and arms, kneel, and crouch, twist, and bend. The employee is occasionally required to sit, climb, or crawl. Reasonable accommodation may be made to enable individuals with disabilities to perform core functions. Travel No Travel expected. Benefits Offered: At Central States, we are an ESOP. That means each one of our employees is an owner of the company and receives an allocation of stock every year. This allows all our employees to share in the wealth and success of the company. We also offer: • 401K Match • Education assistance available - Up to $5,250 each year • Profit-Sharing bonus • Medical - 100% employer-paid coverage available • Dental • Vision • Holiday pay • Vacation pay • Employee Assistance Program providing Confidential Emotional Support, Work and Lifestyle Support, Legal Guidance, Financial Resources and Digital Support • Care Guides to help employees navigate the complex healthcare system • Life insurance - 1.5x annual salary - 100% employer paid • Wellness Program - earn up to $1,200 annually when enrolling in a medical plan! • Health Savings Accounts • Flexible Spending Accounts • Short-Term Disability • Long-Term Disability - 100% employer paid • Performance based merit increases • SHINE program - Employee Financial Assistance and Dependent Scholarships! Central States Manufacturing, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Janicki Industries is a private and family-owned business based in Washington State with a Layton, Utah, facility. The Layton Utah facility specializes in machining the largest most complex structures built from carbon fiber composites and aluminum for the aerospace and space exploration markets. The parts produced are installed on todays most advanced fighters, bombers, rockets, and space vehicles. Janicki Industries continues to lead the market with both innovations and abilities alike. If you want to drive continuous improvements on long-term production programs or challenge your abilities to start up new projects in rapid development, there is no shortage of diversity in work. At Janicki, we work on complex parts and assemblies for aerospace and space exploration markets. POSITION DESCRIPTION This position is located on-site in Layton, Utah. Join our team as a Production Technician and put your skills to work in a dynamic, hands-on manufacturing environment. You'll perform a variety of processes-composite fabrication, resin infusion, assembly, mill operations, metrology, oven processing, and waterjet cutting-while applying your NDI Level II expertise to set up and calibrate inspection equipment, interpret results, and ensure compliance with industry codes, standards, and specifications. Your precision and technical knowledge will help us deliver high-quality products that meet the most demanding requirements. The following essential job functions are performed as a Production Technician: Reads, interprets, and follows pass downs, work orders, isometric drawings, blueprints, work instructions and other technical and non-technical documents Assemble and fit aircraft structural parts and subassemblies Perform test fit and gap checks with high tolerances Performs countersinking activities Perform structural adhesive bonding preparation per product specifications and compliance programs Align, fit, assemble, connect, or install system components, using jigs, fixtures, measuring instruments, hand tools, or power tools Adjust, repair, rework, or replace parts and assemblies Layout and mark reference points Keeps work orders stamped, dated and organized Vacuum bagging in order to prepare parts for drop tests, de-bulking fabric, and infusion Performs tabbing operations to work order specifications General sanding and finish work using grinders and sandpaper as needed Maintains the work area and equipment in a clean and orderly, FOD free condition Packages and crates parts for shipment, including shrink wrapping Has knowledge of and ability to use common hand tools for assembly components per verbal, written, and drawing requirements Must work well under pressure, meeting and completing multiple deadlines Must be at work on time and maintain good attendance. This is a condition of employment and is an essential function of the job Performs other duties as assigned QUALIFICATIONS Due to our ITAR and EAR regulations, applicants must be a US Citizen or of Legal Permanent Resident Status as defined by 8 U.S.C. 1324b (a)(3). EDUCATION/EXPERIENCE Minimum requirement for all positions is a high school diploma or GED Three years (3) of professional assembly experience in complex assembly and aircraft frame assembly/maintenance preferred Prior experience in composite or fiberglass fabrication and repair is preferred Demonstrated ability to effectively perform assigned NDT tasks and interpret results of inspections Must have the ability to read, understand and follow work orders, written procedures, blueprints, drawings, and other technical documents Must have effective verbal and written communication skills in the English language ADDITIONAL INFORMATION Wage range for this role is between $20 - $45 an hour plus a discretionary bonus, 401(k) matching, vacation, and health benefits. Employees can also receive additional pay for off-shifts, off-site work, and access pay. The range provided is Janicki's estimate of the base compensation for this role. Actual amount offered will be based on job-related and non-discriminatory factors such as experience, location, education, training, skills, and abilities. Not sure that you'll be the perfect fit for this role? You should still apply! We'll review your application for other opportunities. We are always on the lookout for talented people! Janicki Industries is an Equal Opportunity Empl oyer. Janicki Industries does not discriminate on the basis of race, color, religion, sex, national origin, sexual orientation, marital or familial status, physical or mental disability, genetic information, age, retaliation, veteran/military service status, or any other legally protected status. Janicki is proud to be a military friendly employer. Applicants or employees wishing to view a copy of Janicki Industries' Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify the Human Resources Department at **************. As a federal government contractor and a recipient of federal funding, Janicki is required to abide by federal drug testing requirements (including preemployment drug testing for cannabis). Additionally, because of Janicki's work on aerospace products and the high volume of safety sensitive positions, Janicki takes the safety of its employees very seriously and requires that employees pass a preemployment drug test prior to starting employment.

A bit about us Trek is an awesome place to work, with amazing benefits for all employees. We build only products we love, provide incredible hospitality to our customers, and change the world by getting more people on bikes. When you're on our team, you're taken care of, encouraged to learn and grow, and given lots of opportunities to do so. Give us your best, and we'll give it right back. Sound pretty sweet? Then come join us! Job LocationTrek Store Heber City Summary Job Description As a Trek Production Technician, no one day is the same as the last. This job is all about keeping bikes running flawlessly and building relationships so their owners love riding them. We are looking for a skilled technician who will complete more than 50% of the total repairs for the team. This Lead Technician role focuses on repairing bikes quickly and consistently, while keeping accuracy and quality a top priority. The team and our customers will be trusting you with the most complex repairs. This role requires elevated technical skills as well as communication, leadership, and problem solving. What you'll experience on the job: Flexible work schedule Opportunity for increased pay based on efficiency and production level Minimal interaction with customers Access to a full complement of the industry's best tools Potential for paid travel to other US based Trek Stores What you'll bring to the team Self-motivation, a positive, team-focused mentality, plus a willingness to pitch in on any task Fantastic hospitality-a warm, approachable manner, great listening skills, and a drive to help in any way you can-even on the toughest, busiest days Top-notch communication skills Impressive attention to detail and a love for tinkering ‘til you figure it out Eagerness to learn the ins and outs of servicing bicycles A desire to continually learn proper service methods and new technologies Trek Benefits • Flexible and fun company culture • Competitive health care • PPO & HDHP medical plan options, Dental insurance, Vision insurance • Flexible Spending Accounts (FSA) • Free life insurance & optional term life insurance • Competitive vacation package • 401(k) with match and Employee Stock Ownership Plans (ESOP) • 12 weeks of maternity leave with 100% pay • Paid company holidays • Tuition Reimbursement up to $15,000! (Undergraduate & Masters programs) • Employee discounts on all product • Deep partner retail discounts We are an Equal Employment Opportunity (“EEO”) Employer. Trek strictly prohibits discrimination on the basis of race, color, creed, religion, gender, gender identity, pregnancy, marital status, partnership status, sexual orientation, age, national origin, veteran or military status, disability, medical condition, genetic information, or any other characteristic prohibited by federal, state and/or local laws. This policy applies to all aspects of employment, including hiring, promotion, demotion, compensation, training, working conditions, transfer, job assignments, benefits, layoff, and termination. We are an E-Verify employer. For more information, please click on the following links: E-Verify Participation Poster: English / Spanish E-Verify Right to Work Poster: English | Spanish

Join our amazing team and contribute as a: Production Technician ABOUT THE ROLE Under the direction of the Production Supervisor, the Production Technician is responsible for maintaining and monitoring efficient operation of all production processes. Amrize, the largest manufacturer and distributor of cement and related construction materials currently has an immediate opening for a Production Technician position for its manufacturing facility located in Coalville, Utah. WHAT YOU'LL ACCOMPLISH * Demonstrates a commitment to communicating, improving and adhering to safety policies in all work environments and areas. * Practice and promote safety in such way as including but not limited to; assessing risks before starting tasks, only performing authorized activities, utilizing appropriate PPE. * Exercise and encourage core values including but not limited to; developing self and coaching others by inspiration and empowerment * Responsible to maintain and monitor efficient operation of all production processes. * Make routine operation and preventative maintenance inspections of process equipment, report all unusual conditions, and prepare work orders for maintenance when required. * Operate Front end Loader, Skid Steer, forklift various Screening and crushing systems, and other equipment. * Monitoring and recording material inventories. * As directed, lubricate, inspect, adjust or make repairs to process equipment. * Completion of the Area Safety Inspection, Mobile Equipment Checklist and any other documentation as required. * Operate and perform duties at rail car loadout. * Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors. WHAT WE'RE LOOKING FOR * Education: High school diploma or equivalent required * Experience: Production or other plant related experience strongly desired * Knowledge of the aggregate manufacturing process and equipment a plus * Must have basic computer skills * Must be able to read, write and speak English * Strong work standards and attendance record * Must be able to climb stairs and ladders and work in both hot and cold environments. * Must be able to work in awkward positions for short periods of time. * Must be able to work in confined areas and not have a fear of heights. Additional Requirements: * Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests. WHAT WE OFFER * Competitive salary * Retirement Savings: Choose from 401(k) pre-tax and/or Roth after-tax savings * Medical, Dental, Disability and Life Insurance * Holistic Health & Well-being programs * Health Savings Accounts (HSAs) & Flexible Spending Accounts (FSAs) for health and dependent care * Vision and other Voluntary benefits and discounts * Paid time off & paid holidays * Paid Parental Leave (maternity & paternity) * Educational Assistance Program * Dress for your day Did we spark your interest? Build your future with us and apply! HR Contact: Katherine Therese HENNESSY BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email recruiting-accommodations@amrize.com. This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted.

For those who seek the best, there's only Stein. Stein Eriksen Lodge: an authentic European lodge nestled mid-mountain at the acclaimed Deer Valley Resort in Park City, Utah. Named after Norwegian Olympic Gold Medal skier Stein Eriksen, the Lodge is known as a premiere year-round destination. Why work for the best? The Stein Collection creates legendary experiences for our team members, guests, and owners at all four of our properties: Stein Eriksen Lodge, Stein Eriksen Residences, The Chateaux Deer Valley, and The Chateaux Residences. We believe that our goals are realized through commitment to our team members, where every person is a valuable asset and key ingredient to success. We consider ourselves very fortunate to be based in Park City, a vibrant, community-oriented town, and consider it our duty to contribute, support, and partake in these extraordinary efforts. As a long-established icon and ever-growing brand, Stein Collection employs hundreds of hard working, diverse, and exceptional team members year-round. More than 70 team members have been with us for 10 or more years and we attribute our staff loyalty to the positive and respectful company culture our team fosters. Maintenance Technician The position will provide efficient service while responding to guest requests. They will engage in troubleshooting to determine issues and find solutions to solve technical problems. Routine maintenance throughout the property as necessary. Job applicants must be able to move and lift to 50 lbs. Must be able to stand and walk for extended period of times. Essential Functions: Advanced skills in the following trades and/or one specialized skill: plumbing, HVAC, electrical, mechanical, carpentry, kitchen equipment repair, construction and pool/spa Engineering Responds to guest room calls as required Provides technical support to staff Maintains building systems Provides preventative Engineering to various equipment Assigned to various projects Maintains essential stock inventories Other Responsibilities: Performs other related work as assigned Completes work order reports Must be able to lift, push and pull 50 pounds Must be able to stand and walk for extended periods of time Must be able to read and understand blueprints and schematics Interacts with front and back of house personnel Snow removal The Stein Collection Offers: Great benefits including choice of health insurance plans, dental, vision, short- and long-term disability and life insurance, matching 401K, and more Competitive wages and bonus plans to recognize your dedication and service with us Paid training time and programs Chef prepared meals daily in our cafeteria, at no cost to you On site heated garage for employee parking -a great perk in winter! Unmatched ski/snowboard benefits at Park City Mountain/Canyons Resort and Deer Valley Resort Flexible schedules and time off policies to accommodate family, school, and other activities Weekly raffles for tickets to events such as the Utah Jazz, Utah Mammoth, Real SL, and Salt Lake Bees Monthly team member appreciation events and recognition programs Hotel room, spa, dining, shopping, ski/snowboard rental discounts available We pride ourselves on being an EEO. We are committed to hiring a diverse workforce.

Job DescriptionBenefits: Bonus based on performance Company car Competitive salary Paid time off Training & development Benefits/Perks Health benefits PTO and paid holidays Work attire paid for by the company Paid training Potential performance-based compensation opportunities Growth and advancement opportunities Year-round work We Provide Comprehensive Training and Advancement Opportunities For You! At Fitness Machine Technicians, we take pride in offering the industry's only Certified Fitness Equipment Technician Training Program, meticulously designed to empower technicians like you. Our program stands out by providing the most comprehensive training available, equipping participants with the skills necessary for maintenance and repair across all equipment types and manufacturers. We utilize a variety of effective training methods, including: In-person instruction Hands-on experience Video modules Field training With this unparalleled training, you gain a significant advantage over the competition, ensuring that you provide accurate repairs and exceptional service to our valued customers. But that's not allwe are committed to helping you rise in your career, so we offer a clear career path with multiple opportunities for growth and self-empowerment. Upon certification, you can become a Certified Master Technician by completing the required repairs and preventive maintenance services. As a Certified Master Technician, you will gain the potential to train and manage others, while being compensated accordingly for your expertise. When you join our team, you're not just starting a job but embarking on a fulfilling career path that leads to success. Take the first step towards improving your skill set today by joining Fitness Machine Technicians! Job Summary Fitness Machine Technicians is looking for a technician to perform repair and preventive maintenance services for residential and commercial customers. If you are a go-getter this is the job for you! Must be awesome at customer service and quality control. Responsibilities Diagnose, repair, and perform preventive maintenance on various pieces of fitness equipment at customer locations including homes and commercial facilities Identify and report replacement parts needed Assemble and disassemble equipment and perform equipment installations at commercial facilities Complete accurate and thorough customer work order reports using our Field Service Management software Professionally interact with customers to help maintain great client relationships and explain repairs and equipment failures Drive from job to job in a clean and well-organized branded vehicle Daily local travel Occasionally lift heavy equipment Qualifications 3 years of mechanical/electrical aptitude and experience working with hand tools required Experience repairing fitness equipment is a plus but not necessary. Our CFET Training Program will prepare you for the job. Positive attitude, professional appearance, and ability to communicate clearly and professionally with customers and colleagues Ability to use a phone/tablet for scheduling and job reports Valid Driver's License and clean driving record A self-starter with problem-solving skills Ability to work independently and plan, organize, and manage a variety of tasks Applicants must be able to pass a background check High School diploma or equivalent

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: SecretTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman Defense Systems is seeking a highly motivated and qualified Systems Engineer / Principal Systems Engineer to serve as a Subcontract Technical Engineer. You will critically analyze supply chain solutions that meet all program requirements and manage supply chain risks to ensure positive supplier performance through all phases of the program life cycle from capture to sustainment. You will be the main focal point to the Subcontractor Management team and accountable to the MDT SSE leadership and Technical Lead. This role is located in Roy, UT. What You'll Get to Do: Track and monitor supplier deliverables Work with Data Management and SMT to resolve / track supplier deliverables. Coordinate assignment of SDRL review with SSE team Assign and track progress of review. Ensure timely response to supplier deliverables. Data entry of comments into DMDS or Enovia Evaluate and resolve contract requirement discrepancies. Track and monitor the delivery of Subcontract data packages to ensure relevant contract requirements are met or exceeded. Participate with contracts administration and purchasing to develop subcontract policies and procedures. Review Statement of Work (SOW) and identify SDRLs on contract and resolve discrepancies by CRMs. As a full-time employee of Northrop Grumman, you are eligible for our robust benefits package including: Medical, Dental & Vision coverage 401k Educational Assistance Life Insurance Employee Assistance Programs & Work/Life Solutions Paid Time Off Health & Wellness Resources Employee Discounts This position's standard work schedule is a 9/80. The 9/80 schedule allows employees who work a nine-hour day Monday through Thursday to take every other Friday off. Basic Qualifications Systems Engineer: Bachelor's Degree in a STEM (Science, Technology, Engineering or Mathematics) discipline from an accredited university and 2 years of related experience, or a Master's Degree in a STEM discipline and 0 years of related experience 1 years of applying and understanding Systems Security Engineering principles. 1 years in showing the ability to communicate effectively and clearly present technical approaches and findings. 1 years of contracting, acquisitions, supply chain, and/or procurement experience. 1 years of experience performing against schedule. Must have an active U.S. Government DoD Secret security clearance at time of application, current and within scope ( Principal Systems Engineer: Bachelor's Degree in a STEM (Science, Technology, Engineering or Mathematics) discipline from an accredited university and 5 year of related experience; Master's degree in STEM with 3 years of Experience; or PhD with 1 year of experience. Must have an active U.S. Government DoD Secret security clearance at time of application, current and within scope ( 3 years of applying systems engineering principles 3 years in showing strong communication and collaboration skills, with the ability to work effectively with various stakeholders, including contracts, engineering, quality, and operations teams. 3 years demonstrating the ability to collaborate effectively with major subcontractors and their sub-tier suppliers to ensure the timely delivery of high-quality products. Preferred Qualifications for both roles: Active Top-Secret clearance with SAP Access. Direct experience with Department of Defense contracting, acquisitions, supply chain, or procurement. Direct experience Program Protection and/or Supply Chain Risk Management. Direct experience with ICBM Systems. Proven experience interfacing with subcontractor management teams, ensuring alignment with both system security engineering and supply chain leadership directives. Experience in evaluating suppliers' key system security and supply chain risk management practices, and performing supplier assessments and monitoring quality and reliability A solid understanding of Program Protection applicable to US Government Defense Programs and applied knowledge in the application of SSE principles across a broad spectrum of security measures (Cybersecurity, Counterfeit Awareness, Anti-Tamper, HW/SW Assurance, OPSEC, etc.) to protect critical program information (CPI) #Sentinelsystems Primary Level Salary Range: $79,300.00 - $118,900.00Secondary Level Salary Range: $98,400.00 - $147,600.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.