Assembly & test technician entry level jobs

We are seeking a detail-oriented and skilled Soldering/Assembler to join our clients team. This role is responsible for soldering, wiring, and assembling small components and circuit boards according to specifications. The ideal candidate will have strong attention to detail, steady hands, and the ability to follow technical instructions and diagrams to ensure high-quality assembly. Key Responsibilities: Perform precision soldering of wires and electronic components onto circuit boards. Assemble and build electronic components, subassemblies, and circuit boards according to work instructions and schematics. Run and connect wires on small components with accuracy and efficiency. Inspect work for accuracy, quality, and compliance with standards. Use hand tools, soldering irons, and other assembly equipment safely and effectively. Troubleshoot and rework defective components as needed. Maintain a clean and organized work area. Follow all safety procedures and company policies. Qualifications: Previous soldering or electronics assembly experience preferred. Ability to read and interpret technical drawings, diagrams, and work instructions. Strong manual dexterity and attention to detail. Experience working with small components and hand tools. Basic knowledge of electronics and wiring practices a plus. Ability to work independently and as part of a team. Physical Requirements: Ability to sit or stand for extended periods. Good hand-eye coordination and visual acuity for small component work. Ability to lift up to 25 lbs as needed. Pay Details: $18.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

We are seeking a skilled and detail-oriented Wire Harness Technician to join our client in the Springboro, Ohio area. The ideal candidate will assemble, repair, and evaluate battery packs, wire harnesses and connectors. This role requires a strong mechanical background, proficiency with hand tools, and the ability to interpret schematics. The Battery Technician will work both independently and as part of a team to ensure optimal performance of battery systems. Pay rate: $32.00/hr-$36.00/hr (depending on experience) Location: Springboro, OH 45066 Position Duties: The ideal candidate will have a strong mechanical knowledge and experience with electrical wiring Proficiency in electrical wiring techniques Experience in using calipers for measurements Familiarity with interpreting schematics and diagrams Knowledge of surface mount technology Ability to use hand tools effectively Fabricate and assemble electrical components according to engineering drawings Utilize calipers to ensure precise measurements Interpret schematics and diagrams for assembly Work with surface mount technology for component placement Use hand tools and logic controllers for assembly tasks Solder components onto circuit boards Position Requirements: Proficiency in electrical wiring techniques Experience in using calipers for measurements Familiarity with interpreting schematics and diagrams Knowledge of surface mount technology Ability to use hand tools effectively Experience with logic controllers is a plus Skills: IPC Certification would be ideal Proficient in using an ohmmeter and other diagnostic tools for troubleshooting. Strong mechanical knowledge with hands-on experience in equipment repair. Familiarity with computer hardware and networking concepts as they relate to battery systems. Ability to read and interpret schematics effectively. Experience in field service or as a service technician is preferred. Knowledge of low voltage systems is a plus. Excellent problem-solving skills with attention to detail. Strong communication skills for effective collaboration with team members and customers.

Who We Are Born from a mission to make prescription eyewear affordable and accessible to everyone, Zenni Optical has been changing the way people see the world since 2003. With complete prescription pairs for adults and kids starting at under $10, we've grown into a global brand with over 51 million pairs of glasses sold - and counting! Based in the San Francisco Bay Area, we're proud to be the Official Eyewear of the San Francisco 49ers, Boston Celtics, Monster Jam, Ghost Gaming, TSM, Major League Pickleball and more. We've also partnered with tastemakers and designers like Chase Stokes, Jrue Holiday, and George and Claire Kittle to bring our brand to life in bold, meaningful ways. Innovation is at the heart of everything we do at Zenni - from our revolutionary EyeQLenz™ with Zenni ID Guard™ glasses to our cutting-edge VR Vision Screener, we're constantly exploring new ways to improve vision and enhance lives. For more information, please visit zenni.com/press. Candidate safety is important to us. Please note that all official communication will only be sent ********************** addresses. About the Role We are looking for a highly motivated Assembly Technician who is eager to learn and develop in the optical field onsite in Obetz, Ohio. The ideal candidate has strong organizational skills, open to feedback, and looking to grow their career. If you are open to light physical labor (frames and lenses for eye glasses) and working with a fantastic team to help people everywhere buy more affordable glasses, we'd love to hear from you! The Obetz location offers a brand new and climate controlled facility with free daily meals and snacks! You'll have the opportunity to move up in the organization based on performance reviews. Want to learn more about our team? Watch our story and see how we're making an impact-check out the video below! 🎬👇 Shift: Monday - Thursday 7:00 am - 5:30 pm (must be available for overtime as needed, including weekends) Compensation: $17 - $19/hour (based on applicable experience) Responsibilities: Picking and unpacking lenses and frames for customers orders Prepping and loading lenses into machines Beginner level mounting lenses into frames Placing of receipted goods into correct locations Maintain good housekeeping, 6S Ensure daily / monthly KPI's are met Adherence to all company policies, processes, and procedures (i.e. Health & Safety Awareness) Report to management on activities and issues Inter-department running Basic Qualifications: Strong organizational skills Good literacy and numeracy skills You are proactive and have a strong ability to identify & problem solve Follow instructions and production schedules Preferred Qualifications: Previous warehousing experience is a bonus! Perks & Benefits: Annual Bonus Program Employee Paid - Health Care Plan (Medical, Dental & Vision) Retirement Plan (401K & matching) Life Insurance (Basic, Voluntary & AD&D) Paid Time Off (Vacation, Public Holidays) Training & Development Dental insurance Employee assistance program Flexible spending account Health savings account Vision insurance Free Lunch Daily Referral program As a condition of employment for this role, you will be required to undergo pre-employment drug testing in accordance with our company policies and applicable law. We look forward to hearing from you! We strive to build a diverse team of individuals with a broad range of experience and perspectives. We encourage you to apply even if you don't feel you meet all the qualifications. Zenni Optical is an equal opportunity workplace and considers applications without regard to race, color, national origin, gender identity, sexual orientation, age, citizenship, marital status, disability, or Veteran status. We also consider qualified applicants regardless of criminal histories, consistent with legal requirements.

We are excited to be adding a Assembler to the MAC Trailer Team. Our Assembler position utilizes and implements acquired mounting and assembly knowledge, experience, and skill to assemble/mount parts and products for the tractor trailer industry. Please note that shift hours are Mon - Thur 7am- 5:30pm with additional overtime. Wage Range: $19.50 - $26.25 What we offer you: Competitive Pay Perfect Attendance Bonus Program Career Growth Opportunities Clean Manufacturing Environment On-site Wellness Clinic Referral Bonus Program Medical, Dental, and Vision Plans Employee Assistance Program Employer Paid Life Insurance Long-term and Short-term Disability Legal Planning Theft Protection Critical Illness Coverage Accident Coverage 401k with Match Vacation Time Paid Holidays Prescription Safety Glass and Safety Shoe Program Employee Engagement Events Philanthropy Efforts Master Trailer Builder Program: Here at MAC Trailer, we pride ourselves on our people and rewarding their hard work. Our Master Trailer Builder program was built to recognize our employees on the shop floor that meet the following criteria: excellent attendance, years of service, mastery of technical skills, ability to train others, willingness to work overtime, and positive attitude. Master Trailer Builders get to enjoy benefits like quarterly bonuses, picture hung on the wall, and an assigned parking spot. Who we are: MAC Trailer is the nation's foremost manufacturer of dump, flatbed, and transfer trailers, straight truck bodies, dry bulk pneumatic tanks, and liquid tank trailers. The success of MAC Trailer can be attributed to a quality product built by quality people. This is why MAC Trailer invests in its people and facilities to create a safe, secure work environment with room for training and growth. If you're interested in being part of a diverse workforce in a supportive work environment, MAC Trailer is the place for you. What you will do: Perform and abide by safety policies and procedures while performing tasks and other related assignments Review specification documentation and information related to assignments to ensure products are manufactured to customer specifications and MAC quality standards Perform a wide variety of work assignments to contribute and complete assembly tasks including but not limited to carrying aluminum and steel parts, cleaning products, mounting tires, applying stickers and tape, drilling, bolting, installing components, reading and using tape measures, sawing aluminum material with circular saw, and using impact wrench and other various air tools Perform daily custom assembly tasks within designated time requirements Perform, understand, comprehend, and communicate basic math functions primarily related to measurement Take the parts to lines, pull parts for all lines, and mount tires as a substitute for warehouse positions Communicate issues of concern and any other pertinent information that affects the productive completion of quality product, schedule of product, and safety to supervisor Perform all other assigned duties Clean work areas during and at the end of the shift Organize and restock needed parts and materials Assist other employees as needed and instructed Any other duties assigned Who you are: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Basic math skills Ability to read and understand basic measurements and use basic lengths of measurement Oral comprehension and expression skills to listen to and understand information and ideas presented verbally and then effectively communicate the information and ideas verbally Ability to concentrate on a task over a period of time without being distracted Ability to comprehend and interpret detailed drawings and measurements. Ability to communicate, abide by, verify, and logically respond to safety policies, procedures, and concerns Able to work any shift based on production need Ability to work assigned shift and/or extended shift hours Ability to work alone or with a team Education and/or Experience Mechanical experience is preferred Experience or knowledge of tractor trailer building is preferred Physical Demands Ability to use close vision Ability to lift 50 pounds Ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects Ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects Ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position Ability to physically inspect own work and perform work in various positions and heights Ability to push, pull, and lift various materials including aluminum, steel, and parts Ability to successfully maneuver, lift, bend, kneel, and stoop Ability to work in a manufacturing environment EEOC Disclaimer MAC Trailer is an Equal Opportunity Employer. MAC Trailer does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need.

"Responsibilities: Perform diversified light and heavy assembly of mechanical parts and components for a wide variety of both small and large enclosed drive units. Participate in field service calls to customer locations to tear down and analyze complex enclose drive units. Work from complex drawings and blueprints, sketches; hydraulic, electrical, and mechanical diagrams; parts lists, operations sheets, specifications and instructions to plan work operations, including sequence of work. Maintain equipment and work area in a clean and orderly condition. Maintain required time, production and quality records Determine and report any inefficiencies, defective materials, unusual conditions and machining issues Adhere to all safety guidelines and procedures " />

Responsibilities: Perform diversified light and heavy assembly of mechanical parts and components for a wide variety of both small and large enclosed drive units. Participate in field service calls to customer locations to tear down and analyze complex enclose drive units. Work from complex drawings and blueprints, sketches; hydraulic, electrical, and mechanical diagrams; parts lists, operations sheets, specifications and instructions to plan work operations, including sequence of work. Maintain equipment and work area in a clean and orderly condition. Maintain required time, production and quality records Determine and report any inefficiencies, defective materials, unusual conditions and machining issues Adhere to all safety guidelines and procedures

Job DescriptionBenefits: 401(k) 401(k) matching Dental insurance Free uniforms Health insurance Vision insurance Our company spans over 145 years. We are pioneers in mining, industrial, tunnel, and power ventilation solutions. Our innovative, patented designs ensure superior performance even in the most challenging environments, reducing CO2 emissions and energy costs while minimizing maintenance needs. We believes that Production is a crucial and integral part of the process to deliver our equipment at a high level of quality and efficiency. A broad working knowledge and understanding of the product at all levels of Production helps to improve and maintain these expectations. Our Employees are expected to work together as a Team. Some tasks may not require more than one person, each area and process are intertwined to each other and require professionalism between each member. This helps to exceed the customers expectations with a high level of quality while meeting expected schedules. Assemblers are expected to continue to grow and support the efforts of the team. Conflict at times can be unavoidable but must be dealt with professionally and amicably. Assembly must accommodate overtime and weekends if required meet scheduling milestones and ship dates. Assembly must be willing to work in all required aspects of the job when needed. This includes assembly, disassembly, loading and unloading of trucks, cleaning parts, shop cleanup, shop maintenance and organization and assisting others as needed. We are committed to your professional development and potential for growth within the company. We encourage you to explore open positions within the company and identify roles that align with your career interests. We are happy to discuss how your skills and experience could be a good fit for future premotions. Requirements: 1. Highschool education (preferred) or higher. 2. Subject to background and drug testing. 3. Mechanical background and aptitude preferred. 4. Ability to use hand tools and power equipment. 5. Ability to interpret assembly drawings. 6. Able to safely lift 50 lbs. 7. Achieving all improvement and goal requirements agreed to during annual reviews. 8. The ability to clearly communicate and follow instructions to meet company expectations for assigned tasks. 9. Functional understanding and retention of the Disassembly and Assembly processes and documentation requirements. 10. Ability to interpret drawings. 11. Functional recognition of all product equipment and assembly components (part numbers, mark numbers and descriptions). Expectations: 1. Continuous improvement and maintaining expectations. 2. Maintain organization, cleanliness, and condition of company provided toolbox, assigned tools, shared tools, and company equipment. 3. Maintain safety requirements to include but not limited: use of PPE, rigging and transporting of assemblies and equipment with a heightened level of safety practices. 4. Adheres to all shop processes and flows per our standards. 5. Effectively supportive in multiple areas and aspects of our products. 6. Self-sufficient in cleaning and prepping of parts and paperwork to achieve all inspection, storage, and assembly requirements. 7. Ability to work with others to maintain efficiency, quality, and schedule. 8. Continued instruction and direction by senior coworkers and management. 9. Continuous learning and understanding of all required assembly (disassembly) process, binder approvals, project details and paperwork associated with the product. 10. Achieving all improvement and goal requirements agreed to during annual reviews.

Job Description Assembly of seating systems and components using standard operating procedures. Exceeding customer increasing expectations by providing high quality products and services. Conserve resources as a part of our environment philosophy “Reduce, Reuse, Recycle”. All while committing to continuous improvement, by working in a team-oriented environment, to achieve Setex's common goals. Minimum Requirements: Ability to pass pre-employment drug screening and background checks. Must be willing and available to work scheduled shift. Must be willing and available to work full time and overtime as needed. Must be at least 18 years of age Legally authorized to work in the U.S. Essential Duties and Responsibilities: Must be able to lift up to 30 pounds on a regular basis. Ability to push-pull, perform repetitive lifting/actions, and continuous bending. Occasional walking, significant dexterity/fine finger movements for extended periods. Ability to follow detailed verbal or written assembly instructions. Perform installation and/or installation support for seating products. Recognize and follow proper quality protocol and standards. Perform quality control tests. Stop production if defective or unsafe parts/conditions appear. Complete assignments and tasks in a timely rotational manner. Ability to work independently and in a team environment. Maintain a 5-S environment; Separate & Scrap, Sort, Scrub, Standardize, and Systematize. Maintaining a safe and productive work setting. Comply with Personal Protective Equipment requirements, safety glasses, gloves, and earplugs. All provided by Setex. Perform all other tasks assigned by Team Leader and/or Production Supervisor. Qualifications: Previous manufacturing experience preferred, but not necessary. Must be able to perform each essential duties listed above satisfactorily. Ability to use a variety of hand tools that may include power hand drills, screw guns, and hog ring gun. Ability to read and interpret standard operating procedures (SOP) and documents such as safety rules and procedure manuals. Ability to display skills in manufacturing processes, including operating and maintaining equipment. Demonstrate and maintain respectful behavior. Reporting Relationship: Focus Factory Manager EOE/M/F/Veteran/Disability 2nd Shift 3:30p-Midnight (Overtime at the end of the shift.)

Fabricator / General Labor - Construction Manufacturing Join a trusted leader in midrise construction as a Fabricator/General Laborer. This hands-on role involves fabricating steel wall panels in a production setting. If you're dependable, accurate with a tape measure, and ready to work as part of a dedicated team, this could be a great long-term opportunity for you.Responsibilities: Assemble steel wall panels as part of a team in a production line setting. Use basic hand and power tools to complete fabrication tasks. Accurately read and interpret tape measurements down to 1/16”. Stand for long periods and lift materials up to 50 lbs. Follow safety protocols and contribute to a clean, productive workspace. Requirements: Must pass a tape measure proficiency test at the interview. Comfortable working in a dusty environment (not suitable for individuals with asthma). Steel toe boots required (all other PPE provided). Ability to work overtime as needed. Team-oriented, reliable, and looking for long-term employment. Schedule & Compensation: Monday - Friday, 6:30 AM - 3:00 PM Pay: $17 per hour Contract-to-hire opportunity Why Join Us? Over 50 years of industry leadership in hotel and apartment building construction. Family-like culture with a laid-back atmosphere. Opportunities for pay increases and annual reviews after hire. Working on high-profile projects, including developments near Fenway Park. Benefits After Hire: Medical (multiple plans), dental, and vision insurance Short-term disability and life insurance 401(k) Vacation, paid holidays, and other paid time off

Wire Harness Assembly Technician- Level II Level II Technicians will primarily be responsible for building assemblies ranging from intermediate to complex wire harnesses. Technicians II will be expected to have a wide knowledge of hand tools and machines to complete various tasks. ESSENTIAL JOB FUNCTIONS: Interprets engineering drawings, schematic diagrams, or work instructions to perform required tasks to complete a portion of, or entire assembly. Maintain work area compliance to all Standards including but not limited to; all required materials are to be labeled and properly stored; each work area used must be cleaned after use; all tools are to be put away when not in use; Work Order packets are to remain with their corresponding jobs with all documents accounted for. Comply with all ElectriPack standard building procedures including but not limited to; First Piece Inspections, Mid-Process Inspections, Work in Progress Documentation, and Electronic Labor Tracking. Packaging finished products and organizing them for shipments Completing checks on equipment and products to ensure quality production Actively participate in all required training Regular attendance at work Perform other duties as assigned. Show initiative Requirements Required: Must be performing “At the Bar” or greater Scanning in and out of work orders correctly (%) Create and Printing Labels Completes work orders under quoted times Less than 20% Rework Rate Level 2 Hand Crimping Training PICO Crimper Training Level 1 AMP Press Training Level 1 Sonic Welder Training Heatshrink Cutter Training Fully Cross-trained in one other area of the wire harness assembly production area Must have achieved IPC/WMMA 620 Certification

Passionate, driven people dedicated to making a difference in health care. Are you looking for an opportunity to get into the growing health care field? Look no further, we will train you! SpecialtyCare provides a comprehensive in-house training program that will help you gain valuable skills and a career in health care. We are looking for individuals that have excellent customer service skills that enjoy working in a fast-paced environment. SpecialtyCare is the nation's leading provider of outsourced clinical services. SpecialtyCare continues to grow and we'd like you to grow with us. Our clinicians and technicians participate in over 350,000 surgeries each year in 45 states, the District of Columbia, and Puerto Rico. We serve more than 1,000 hospitals and support more than 13,000 surgeons. We are always interested in building our team by hiring and training smart, dedicated people who share our values and our commitment to excellence. Join us as an Instrument Technician in Minimally Invasive Surgical Support working in the fast-paced Operating Room (OR). As an Instrument Technician you will be trained to positively impact the efficiency of the OR by: * Decontaminate soiled instrumentation, cameras, scopes and other materials/instrumentation as needed. * Prep and pack decontaminated items for sterilization. * Managing the maintenance, care, cleaning and repair of our instrument/scope sets in a hands-on environment. This role does not have direct patient contact/direct patient care. Requirements * Associate or bachelor's degree preferred. * Must live within 30 minutes of our contracted hospitals, able to work flexible hours and participate in a call rotation including weekends/holidays. * Reliable transportation and the ability to be on-call. * Must be able to successfully complete on the job training including certification and company sponsored education modules. The Successful Candidate The successful candidate must bring a high level of ethical, intellectual, professional and personal values that complement the team and company vision. The following competencies are highly valued: * Works well in a fast-paced environment and with a sense of urgency. * Is dedicated to consistently delivering excellent customer service. * Excellent communication skills and basic computer skills. * Ability to adapt and thrive in a high stress environment. * Proven self-starter who works well both independently and in a team. * Lives the SpecialtyCare Values - Integrity, Care, Urgency, and Improvement. Benefits SpecialtyCare is committed to supporting professional growth for our associates. Each associate is allocated funds for continuing education, membership fees, and dues for professional associations. We also provide tuition reimbursement or tuition repayment assistance. We provide a full benefits package including a matching 401K and generous PTO plan. We also cover the cost of maintaining certification. SpecialtyCare is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. SC MISS

Purpose Performs a wide range of basic landscaping, maintenance and resources management activities in along the Olentangy Greenway Trail as part of the Olentangy Reemployment Plan. The Olentangy Reemployment Plan is an 8 week program in partnership with the Columbus Recreation and Parks Department. Example of Duties Performs a variety of landscaping, maintenance and resource management duties including, but not limited to mowing, invasive species removal, trail maintenance, fertilizing, trimming, mulching, etc. Picks up litter and empties trash receptacles. Performs basic trail maintenance including clearing paths, trimming, and pruning using pruners, shovels, rakes, hand saws, hand axes, etc. Operates basic construction equipment including but not limited to power tools, line trimmers, mowers, chain saws, skid steers, etc. Plant, fertilize, prune, water and transplant trees. Assist in the basic construction and repair of decks, signs, tables, roadways, etc. Paints and stains. Qualifications Education/Experience Must be at least 18 years of age. Due to the temporary nature of these roles, local applicants are preferred. Must successfully complete a backround check. Language Skills Ability to communicate effectively and courteously with coworkers and general public on a daily basis. Team-Oriented Works on a team. Good customer service, communications and interpersonal skills. Attendance Being present at work is an essential function of the position. Mathematical Skills Basic mathematics skills; ability to add, subtract, multiply and divide whole numbers, fractions, decimals. Reasoning Ability Ability to carry out instructions and deal with problems involving few variables within a familiar context. Ability to work with a minimum amount of supervision. Physical Demands While performing the duties of this job, the employee is regularly required to walk, talk and hear, operate grounds maintenance and heavy equipment, lift heavy objects, operate power and hand tools, drive off-road vehicles, etc. The employee is frequently required to stand; use hands to fingers, handle, or feel objects, tools, or controls, and reach with hands and arms, etc. The employee is occasionally required to sit, climb or balance, and stoop, kneel, crouch, or crawl. Work Environment While performing the regular duties of the job, the employee regularly works in outside weather conditions. The employee frequently works near moving mechanical parts. The noise level in the work environment is usually moderate. Work Hours Schedule is typically Monday through Friday, 40 hours per week, with some possible Saturday shifts during the 8 week program. Any Additional Information Ability and willingness to cooperate with coworkers on group projects. Ability to complete routine forms. Other Information The above Description represents the essential and most significant duties of this position. It is not intended to exclude other work duties, assignments and responsibilities not mentioned herein. For more information about the Olentangy Reemployment Plan please contact: Joshua J. Simon

Job Type • Full-time, M-F 8:00 a.m. to 4:30 p.m. • Overtime is sometimes required What We Do Building projects such as roads, bridges and buildings, are only as good as the materials they are made of, which is why the experts at the Bowser-Morner Construction Materials Testing Laboratory are fully committed to offering reliable, repeatable, and timely testing in our modern laboratories. Bowser-Morner offers a full battery of physical and chemical testing on a wide variety of construction materials-including soil, aggregate, concrete, asphalt, stone and masonry-to tell you what you need to know about the construction materials you produce or use. We work closely with field technicians and engineers, contractors, producers, manufacturers, and regulatory agencies to validate the quality of materials, ultimately helping to reduce overall projects risks and protect our clients' bottom lines. Bowser-Morner's experienced and competent team strictly adheres to all applicable ASTM test methods, allowing us to serve as a trusted QA or QC source for materials testing. What You Will Be Doing You will receive on the job training for this entry-level position. You will work alongside an experienced CMT Testing Technician to learn how to perform a variety of test procedures used to evaluate the quality of construction materials including soil, aggregate, concrete, asphalt, stone and masonry. Qualifications Need to work well as a team member Need to be detail oriented and organized Ability to follow written and verbal instructions Ability to multitask and shift priorities when needed Flexibility and willingness to modify schedule as required to meet deadlines Basic math and computer skills required Strong written and verbal communication skills Education and Experience • High School Diploma or GED • Experience in a laboratory setting is preferred but not required Physical Requirements Physical Ability • Stand, walk, push, pull, twist, reach overhead, bending, crawling, climbing; lift minimum of 80 pounds Visual Ability • Visual accommodation necessary for reading instructions/materials necessary to perform functions of job Hearing Ability • Ability to monitor sounds for changes in machine function Work Conditions • Work exposes the employee to laboratory testing devices, dust, soil and other external environment factors Bowser-Morner Benefits Include: Health, dental and vision insurance 401(k) Health Savings Account Life Insurance Accidental death & dismemberment insurance Short and long-term disability insurance Employee Assistance Program Paid Time Off Professional development & career path planning

Requisition ID: 910260 Position: Full-Time Total Rewards: Benefits/Incentive Information If you've worn a pair of glasses, we've already met. We are a global leader in the design, manufacture, and distribution of ophthalmic lenses, frames, and sunglasses. We offer our industry stakeholders in over 150 countries access to a global platform of high-quality vision care products such as the Essilor brand, with Varilux, Crizal, Eyezen, Stellest and Transitions, iconic brands that consumers love such as Ray-Ban, Oakley, Persol and Oliver Peoples, as well as a network that offers consumers high-quality vision care and best-in-class shopping experiences such as Sunglass Hut, LensCrafters, and Target Optical, and leading e-commerce platforms. Our unique business model and relentless pursuit of operational excellence ensures that consumers everywhere have access to products. Balancing speed, efficiency and proximity, the Company manages a global supply chain with cutting-edge technology, based on centralization for frames and on a capillary network for lens finishing and prescription laboratories. In our dynamic environment, fueled by technology and innovation, our people have the space to pioneer new solutions. Join our global community of over 200,000 dedicated employees around the world in driving the transformation of the eyewear and eyecare industry. Discover more by following us on LinkedIn!GENERAL FUNCTION The Associate Technician will support EssilorLuxottica operations across Rx Manufacturing, Logistics, and other functions. This temporary summer role offers hands-on experience in a fast-paced, high-volume environment, with exposure to production, material handling, and supply chain activities. The associate will assist with daily tasks, observe workflows, and contribute to team improvements while gaining a strong foundation in safety, quality, and collaboration within a global leader in vision care. Duration may be adjusted based on business needs. MAJOR DUTIES AND RESPONSIBILITIES Cross-Functional Operational Exposure & Learning Participate in operations including basic assembly, inspection, packaging, material handling, or inventory tasks under supervision. Rotate across workstations or departments (e.g., Rx Manufacturing, Logistics) to gain a broad understanding of EssilorLuxottica's workflows. Observe team leads/operators to understand procedures and safety protocols. Support Daily Operations Support material prep, equipment checks, order handling, or routine tasks based on department. Document minor process steps or observations to support team activities. Help track and report basic metrics such as job counts or throughput where applicable. Collaboration & Teamwork Collaborate with supervisors, technicians, and cross-functional teams to understand how priorities are managed in fast paced environment. Contribute to team meetings, safety talks, and improvement huddles. Practice effective communication and teamwork on a live shop floor. Safety & Compliance Awareness Adhere to PPE and site safety requirements at all times. Follow GMPs and department-specific compliance requirements. Support housekeeping and workplace organization (5S) initiatives. Contribution to Improvement Projects Support short-term projects to improve efficiency, organization, or flow. Share feedback to support continuous improvement. BASIC QUALIFICATIONS Enrolled full-time in a secondary or post-secondary program in Canada. Must meet minimum legal working age under federal/provincial law at start of employment. Available for full-time, on-site work in production, logistics, or operations. Able to stand for long periods and work in a production environment. Detail-oriented, eager to learn, and a strong team player. Comfortable rotating across departments and tasks. Able to follow instructions and stay focused in a safety- and quality-driven setting. Legally authorized to work in Canada. OTHER Proof of enrollment and age may be required. Role and duties may evolve based on business needs. Temporary, full-time summer role for enrolled students supporting operations (e.g., production, logistics, supply chain). This posting is for an existing vacancy within our business. Employee pay is determined by multiple factors, including geography, experience, qualifications, skills and local minimum wage requirements. In addition, you may also be offered a competitive bonus and/or commission plan, which complements a first-class total rewards package. Benefits may include health care, retirement savings, paid time off/vacation, and various employee discounts. EssilorLuxottica complies with all applicable laws related to the application and hiring process. If you would like to provide feedback regarding an active job posting, or if you are an individual with a disability who would like to request a reasonable accommodation, please call the EssilorLuxottica SpeakUp Hotline at ************ (be sure to provide your name, job id number, and contact information so that we may follow up in a timely manner) or email ********************************. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, national origin, social origin, social condition, being perceived as a victim of domestic violence, sexual aggression or stalking, religion, age, disability, sexual orientation, gender identity or expression, citizenship, ancestry, veteran or military status, marital status, pregnancy (including unlawful discrimination on the basis of a legally protected pregnancy or maternity leave), genetic information or any other characteristics protected by law. Native Americans in the US receive preference in accordance with Tribal Law. .job Title{ display:none !important; } Nearest Major Market: Cleveland Nearest Secondary Market: Mansfield Job Segment: Logistics, Supply Chain, Supply, Social Media, Housekeeping, Operations, Marketing, Healthcare

As a Test Technician, you will work in a packaging test lab where you will conduct tests on dispensers. You will be responsible for utilizing various machines and fixtures to mount dispensers, assessing their performance by pushing and hitting them to identify areas of failure or excellence. You will set up tests, follow procedures, and record data effectively. Responsibilities * Conduct routine lab testing for packaging and dispensing system evaluation. * Weigh, measure, and record data accurately. * Use Excel for data entry and database management. * Move samples between different test chambers and work areas. * Ensure proper setup of test equipment and follow testing procedures. Essential Skills * Experience with quality testing and test equipment. * Familiarity with electronics and equipment such as multimeters, DMM, and battery simulators. * Basic computer skills, particularly in Excel for data entry. Additional Skills & Qualifications * Entry-level understanding in science, engineering, or as a quality technician. * Detail-oriented with the ability to perform routine testing and mundane tasks. * Experience with soldering electronic boards and using oscilloscopes is a plus. * Outgoing, focused, and hard-working personality. Work Environment The position is based in a well-equipped testing lab within a corporate environment. Working hours are from 8:00 AM to 4:30 PM. The role involves collaborating with team members in a professional and supportive setting. Job Type & Location This is a Contract position based out of Akron, OH. Pay and Benefits The pay range for this position is $20.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Akron,OH. Application Deadline This position is anticipated to close on Dec 4, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Are you tired of technician or maintenance jobs that don't offer you the career growth you are looking for? Do you want a job that offers more stability than turnaround work? Would you want to learn a skilled trade in the oil and gas industry? How about a new career with a company offering training, opportunities to advance, and the potential for multiple pay increases in your first year? Apply for our Entry Level position with Alliance! As a Monitoring Technician, you will work in a rapidly growing industry protecting the environment and have the opportunity to learn and advance within our rapidly growing company. We offer a starting pay rate of $19.50/hr with a clear career path for upward mobility, paid time off, great benefits, and quarterly profit-sharing bonuses. Apply now! During our comprehensive training process, you will learn the following responsibilities for the Entry Level Monitoring Technician (LDAR) position which are located onsite at our client sites: Daily monitoring of components to detect leaking equipment (valves, pumps, connectors, etc.) which can be a source of emissions and volatile hazardous air pollutants Perform and record calibrations on analyzers before use Perform preventative maintenance and troubleshooting on analyzers Identify and report changes to components while performing monitoring Identify and report new or removed components while performing monitoring Identify and report Audio Visual Olfactory (AVO) leaks, Open-Ended Lines (OEL) Identify and report components with missing identification tags Support leak repair activities at customer work sites as required Complete Job Hazard Analysis (JHA) daily Complete Equipment and Vehicle Inspections as required Complete daily paperwork (job summary, component change forms, missing tags, etc) Attend and participate in daily toolbox meetings and scheduled safety meetings Complete all safety and knowledge trainings as assigned Requirements: Ability to be on your feet for 8-10+ hours per day on uneven ground (concrete, rock, grass, mud/dirt, etc.), while wearing the monitoring backpack (weighing up to 25 lbs.) as well as carry other equipment as needed (ladders, water coolers, etc.) Love being outdoors, working safely in all weather conditions Ability and desire to climb stairs and ladders to high heights (up to 300ft) Ability to understand and use hand-held device, and have some mechanical abilities (preferred) Reliable transportation to the worksites is required Key Benefits Include: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired before July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. #ELLDAR

Benefits: Flexible schedule Opportunity for advancement Paid time off Training & development Make $1,000-$1,500/Week Doing Honest Work With a Team That Has Your Back We're Shine of Cincinnati-one of the fastest-growing pressure washing companies in the city-and we're hiring hardworking technicians who aren't afraid to get after it. We do everything from house washes to massive commercial projects, and we're looking for reliable people who want steady work, weekly pay, and a chance to move up. What You'll Do: Pressure wash houses, driveways, decks, apartment complexes, and big commercial buildings. Use professional-grade equipment-pressure washers, soft wash systems, surface cleaners (we'll train you if needed). Work a mix of day and night shifts, depending on the job (especially big commercial jobs this summer). Keep your gear and truck clean, and document your work using our simple system. Talk with customers when needed-be respectful, be yourself. What You Can Expect: Weekly pay: $1,000-$1,500 depending on experience and hustle Bonus opportunities + chance to move into lead or manager roles A variety of work: residential, night work, and large commercial jobs-no boring days All equipment, gear, and uniforms provided-no junk, no cutting corners Paid training and the opportunity to grow with us as we open new locations soon What You Need: Valid driver's license and a clean-ish record Show up on time, ready to work, with a good attitude Not afraid of ladders, heights, or getting dirty Comfortable working outdoors in all kinds of weather Experience is a plus-but we'll train the right person Why Shine? We're building a crew of solid people who want more than just a paycheck. We're growing fast and giving our team real opportunities to grow with us. If you want to be part of something that's going somewhere-and make good money while you do it-this is the place. Schedule: Monday-Friday with some weekend or night work depending on the job. Start early, finish early (most days). Compensation: $1,000.00 - $1,750.00 per week Do you like people? Do people like you? Then... It's a great time to shine! This is your opportunity to forgo a suit, grab a Shine t-shirt, and start helping people while making a living. Let your light shine! You can be a light for people - helping them stay safe while enjoying and maintaining the largest financial investment of their lives - their homes. You can be a light to your own team of like-minded people. You can be a light in your community and provide the type of services that everyone loves and needs, but don't have the time and expertise to get it done safely and correctly. Choosing to lead by serving is our passion. Shine Window Care specializes in the following services: Window Cleaning Pressure Washing Gutter Cleaning Holiday Lighting THE SHINE STORY: What started as one guy with a desire to create opportunities for others is now a nationwide family of businesses - working to spread light, caring excellence, and team success. In 1998, Chris Fisher graduated college and set out on a journey to build a company. From one guy with a squeegee, Shine is now a growing national franchise employing great people who make exceptional teams. Our Franchises Need People Like YOU! Whether you are already a window cleaning expert or have no experience at all, we are looking for those who display strong character, work ethic, and are driven to be the best! Shine provides all the training, technology, support, and know-how to help you get it done. You bring a smile and a heart for learning and the Shine business will work very well for you. Shine is the name we chose to describe the work we do, the people that do it, and the God we serve. Our hope and intention is that our communities will see something different in us - something inspiring - something attracting. Let your light shine!

Job Description Looking for Technician's All Classes of Technician's (A) Technician, (B), Technician, (C) Technician, and Entry-Level Express Technician 5 Day work week, Pay based on experience level. Requirements/Qualifications: Prior Infiniti, Nissan, and/or other relevant major manufacturer automotive experience 3 years (preferred) but not required. ASE and/or manufacturer certification, required for A & B class Technicians. C level Technician and Entry-Level Express Technician Welcome. A real team player who is focused on providing exemplary client services. Ability to multi-task in a fast paced work environment. Strong organizational skills and detail oriented. Be at 18 years of age. Operate a wide variety of cars, light trucks, and vans, with ability to drive both manual and automatic transmissions. Clean driving record. Drug free work place. Work Conditions/Responsibilities: As an "A" Class Automotive Technician you will perform vehicle repair and maintenance as assigned in accordance with dealer and factory standards: Diagnose and repair vehicle automotive systems including engine, steering, suspension, brakes, and air conditioning to required specifications. Preform vehicle inspection to identify necessary repairs. Provide labor and time estimates for all repair work. Inspect and test vehicles to determine necessary and applicable repair work. Complete necessary paperwork and documentation for service repairs. Participate in on-going company and manufacturing training, and education programs, to stay current and abreast of changing technology. Provide and maintain a basic inventory of required hand tools. Benefits: Closed Sundays / 5 day work week Paid vacations 401(K) Dental Insurance Vision Insurance Medical Insurance Employee Discount Flexible Schedule Work Location: One location and in person.

at Ayr Wellness AYR Wellness is a publicly traded, multi-state cannabis company with more than 85 dispensaries. We are one of the largest scale producers of high-quality cannabis in the U.S., and our purpose is to be a force for good. People are at the heart of everything we do, and we are passionate about bringing progress and positive changes to our communities, our industry, and our world. Our talented and reliable team members are the foundation of our business and investing in exceptional talent is paramount to our success. The key to building a culture where everyone can thrive starts and ends with our teams. Their collective courage and kyndness sets AYR apart. Your career growth at AYR is limitless, and we believe in creating an environment where everyone can flourish and win together. Job Summary Our Cultivation Technician positions are responsible for executing cultivation plans in keeping with the Company's operating procedures for indoor and outdoor cultivation. Technicians conduct the day-to-day assignments and tasks of the cannabis production cycle. Cultivation: Cloning, cutting, and transplanting; watering; labeling; and inventory data input. Plant care during vegetative and flowering phase: trimming, manipulating, and staking; big leafing and pruning; watering; plant monitoring; inventory data input. Harvesting: Cutting plants; weighing and inventory data input into the electronic inventory tracking system. Operating and maintaining cultivation systems/equipment; stocking and handling production inputs and supplies; sanitizing and cleaning growing rooms, cultivation workspaces and tools. Duties and Responsibilities Cloning: cutting, rooting, and transplanting; clone care, watering and feeding; clone monitoring and climate control; labeling; and inventory data input into state mandated electronic tracking system. Monitors growing conditions and reviews changes in humidity, moisture and temperature and cultivation procedures to ensure conformance with quality control standards. Inspects crop to ascertain conditions such as leaf texture, bloom size and the existence of pests or disease; removing substandard or diseased plants to maintain quality standards. Plant monitoring and care during vegetative and flowering phase: trimming and staking; big leafing and pruning; plant care, watering and feeding; plant monitoring and climate control; pest and disease control; inventory data input. Harvesting: cutting plants; trimming cut plants; removing flowering tops; weighing and inventory data input into the electronic inventory tracking system. Curing: hanging and dry-racking flowers; monitoring curing process and climate control; labeling; weighing and inventory data input. Operating and maintaining cultivation systems/equipment: monitoring, calibrating, running, and maintaining lighting, irrigation, climate control and other cultivation systems; stocking and handling production inputs and supplies; sanitizing and cleaning growing areas, cultivation workspaces and tools. Ensure daily compliance with policies and procedures including but not limited to, state compliance, security protocols, and access protocols. Other duties as required or needed to assist the company in meeting goals. Qualifications Excellent communication skills Strong work ethic, reliable, flexible Commitment to producing highest quality work Ability to work in a demanding, fast-paced environment, including flexible and/or extended hours as needed Education High school diploma/GED preferred Experience Experience in the cannabis or agricultural industry not required, but preferred Competencies (Knowledge, Skills, and Attitude) Adaptable / Flexible - Effectively manages change and adjusts comfortably to new people and processes; multi-tasks and handles ambiguity and stress well while remaining positive; bounces back quickly from challenging situations; asks for help when needed and stays focused on being a force for good. Direct reports No direct reports Working conditions The person in this position may be exposed to dust, kief, cleaning chemicals and fumes. Although systems are in place to remove these byproducts, there is still exposure to some degree. Frequently works in rooms with bright light where eye protection is required. Frequently works in rooms with moderate heat and humidity. The person in this position is constantly exposed to moderate background noise due to environmental systems, equipment and fans. Physical requirements Prolonged sitting, standing and / or walking motion/movement will be required throughout the shift. Constant movement of hands/fingers and limbs; this position requires good manual dexterity, coordination and stamina. Frequently ascends/descends a ladder to inspect/maintain plants. Occasionally operates power hand tools and other cultivation machinery. Must be able to inspect and detect quality deviations and defects. Occasional lifting, positioning or moving items up to 50 pounds. AYR Wellness is an equal opportunity employer. We are committed to building a team that represents a variety of backgrounds, perspectives, and skills. We do not discriminate on the basis of race, color, religion, creed, national origin, ancestry, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity or expression, age, disability, genetic information, marital status, military or veteran status, or any other protected status in accordance with applicable federal, state, and local laws.