Assistant technical engineer jobs near me - 188 jobs

A medical technology company in San Francisco is seeking a Machine Learning Engineer to leverage vast medical imaging data in training deep neural network models. You will work on enabling a surgical robot to understand anatomy, empowering doctors to perform safe procedures. The ideal candidate should have at least 2 years of experience in machine learning engineering, expertise in Python, and familiarity with image-based neural networks. Join us in revolutionizing access to life-saving interventions. #J-18808-Ljbffr

We're looking for a Customer Success Engineer II to drive the success of Procore's French Speaking customers in Canada. In this role, you'll be the product champion of Procore and serve as a subject matter expert. You will succeed in this role when the customer succeeds in adopting and realizing business performance gains from their investment in Procore. You will literally be helping improve the lives of our construction customers by connecting them on a global platform. As a successful Customer Success Engineer II, you'll help organizations understand best practices around construction technology and solutions, and the many business benefits they can provide. You'll work in a highly collaborative, creative, and driven environment that values openness, optimism, and ownership. In this role, you'll leverage your consultative-mindset and knowledge of the construction industry and Procore's software platforms to provide clients with important recommendations on how to maximize the value of their Procore technology, and what other products they can benefit from. You'll partner closely cross-functionally with Sales, PS, Support, Product and Marketing. Successful candidates are passionate about construction and technology. This position reports to the Manager, Customer Success and can be based remotely within Canada. We're looking for candidates to join our team immediately! What you'll do: Make data-driven recommendations to your customers on how they can optimize the value of Procore, based on customer analytics and industry best practices. Craft value-based presentations that address customer business problems and accelerate the adoption of the Procore platform Provide product roadmap and product release updates to your customers so that they can benefit from our leading-edge technology Drive in product demonstrations and coordinate multiple technical resources, both internal and external Serve as a technical account manager by providing the highest level of responsiveness and customer service and to your clients, through clear and effective communication Foster a positive team culture by supporting and mentoring your fellow Procorians and collaborating with all levels of the organization to develop best practices. Develop a mastery of Procore's products, professional services, and industry best practices Up to 50% travel to client sites (may include domestic and international), industry events, and other Procore offices What we're looking for: Fluent in French (speaking and writing) 2+ years of Construction industry expertise 2+ years of Customer Success, Professional Services, Technical Pre-Sales experience Ability to leverage strong technical aptitude to master Procore's product offerings, business model, services, and emerging technologies Ability to work cross-functionally and collaboratively with multiple stakeholders on time-sensitive projects Outstanding presentation and communication skills both in-person and through virtual meetings, and in writing Strong analytical and problem-solving skills to synthesize relevant and impactful intelligence from ambiguous data Understanding of the construction industry across different verticals (general contracting, subcontracting, real estate development, etc.), with previous experience as a construction Project Manager, Site Super, Project Finance Manager, Estimator, or Project Engineer preferred Bachelor's degree in Construction Management, Civil Engineering, Mechanical Engineering, Information Systems, or CS preferred, along with experience managing project construction including bidding, procurement, RFIs, submittals, drawings, specifications, documents, schedule, quality control, and safety Additional Information Base Pay Range: 96,000.00 - 132,000.00 CAD Annual On Target Earning Range: 120,000.00 - 165,000.00 CAD Annual This role may also eligible for Equity Compensation. Procore is committed to offering competitive, fair, and commensurate compensation, and has provided an estimated pay range for this role. Actual compensation will be based on a candidate's job-related skills, experience, education or training, and location.

Your Opportunity as Principal Controls Engineer - TSO The Principal Controls Engineer will lead and support complex automation, controls, and technology initiatives across multiple manufacturing sites. Responsibilities include managing projects from concept through execution, establishing and maintaining engineering standards, engaging with vendors to drive innovation, and providing corporate technical support. This role requires close collaboration with plant leadership, engineering teams, and operations to ensure successful implementation and alignment with business objectives. Location: You can pick to work at any of these locations: Orrville, OH, Arkadelphia, AR, Buffalo, NY, Columbus, GA, Decatur, AL, Emporia, KS, Lexington, KY, Longmont, CO, McCalla, AL, Memphis, TN, New Orleans, LA, Scottsville, KY, or Topeka, KS Work Arrangements: Approximately 30% Travel to other sites 100% on-site at the plants. AM Shift (Mon-Fri 8am-5pm) - Flexibility required. Willingness to flow to the work as needed In this Role You Will: Projects: Support, lead, or manage larger automation, controls, and technology projects at manufacturing sites, including possible installation oversight. Collaborate with engineering and operations leaders from feasibility through startup and CQV (commissioning/qualification/verification). Standards and Best Practices: Apply, maintain, and develop engineering standards to ensure consistency and compliance with NFPA 70, NFPA 70E, NFPA 79, NEC, OSHA 1910. Communicate standards, guidance, and recommendations to engineering and controls personnel at the sites. Vendor Engagement: Work closely with vendors to establish accurate quotations and resolving issues when needed. Leverage our internal resources to ensure terms and conditions are acceptable. Proactively engage with outside companies to explore new technologies. Corporate Support: Provide C&IS support to operations, ensuring alignment with business objectives. Support MES and IS Operations when priorities align. Automation Landscape: Understand current automation and technology state and drive targeted improvements, reapplications, and emerging technologies as part of the greater Operations Technology Team. Expert in Key Technologies: Serve as the subject matter expert for key technologies, providing guidance and support to the engineering and operations teams. The Right Role for You We are bold, kind, strive to do the right thing, we play to win, and we believe in a strong community that thrives together. Our culture is rooted in our Basic Beliefs, and we believe in supporting every employee by meeting their physical, emotional, and financial needs. What We are Looking For: Minimum Requirements: Bachelor's degree in engineering or 20+ years of equivalent plant experience 8+ years in controls/automation 5+ years in manufacturing 2+ years of managing others Strong knowledge of control hardware/software (Allen Bradley PLC and Rockwell FactoryTalk platforms) Familiarity with NFPA and OSHA guidelines as they apply to electrical, controls, and automation Additional skills and experience that we think would make someone successful in this role: Knowledge with plant systems software (Proficy, Project Management, eAM, etc.) Mechanical/electrical experience in food manufacturing Ability to collaborate across departments and sites Remote management capability Strong judgement and adaptability Work Environment: This job operates in a manufacturing environment. The noise level in the work environment and manufacturing sites can be high. Physical Demands: Regularly required to talk and hear. Frequently required to stand; walk; use hands and fingers to handle or feel; and reach with hands and arms. Occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. Able to lift objects up to 50 pounds frequently. May push and pull heavy objects. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Learn More About Working at Smucker Helping our Employees Thrive Delivering on Our Purpose Our Continued Commitment to Ensuring a Workplace for All Follow us on LinkedIn #LI-TJ1 #INDSA

Compensation: $85,000 - $128,000 (DOE) Travel: Typically ~20% (up to 35% from Concord; up to ~50-70% for remote-based candidates) (Confidential) This opportunity is with a global leader in advanced materials and engineered solutions, supporting highly regulated industries including aerospace, energy, semiconductor, automotive, and industrial manufacturing. The organization is known for innovation, technical excellence, and long-term investment in its people. The company maintains a strong ethical culture, emphasizing integrity, professionalism, safety, and continuous improvement, and offers employees significant opportunities for technical growth, career advancement, and cross-functional exposure. Position Overview The Robotic Controls Engineer will play a key role in the integration, commissioning, and support of advanced robotic and automation systems. This position blends hands-on controls engineering, robotics, and customer-facing project work, supporting custom equipment deployments at customer sites. This role is ideal for an engineer who enjoys end-to-end ownership, troubleshooting complex automation systems, and working directly with customers to deliver safe, reliable, and high-performing solutions. Key Responsibilities Integrate, program, and commission robotic and automated equipment at customer facilities Troubleshoot complex PLC, process I/O, robot communication, and control system issues Support assembly, setup, testing, and validation of custom and ancillary equipment Participate in design reviews, process hazard analyses (PHA), and engineering change management Deliver operator and engineer training to ensure safe and effective system operation Support field projects with minimal supervision, managing tasks from startup through handoff Contribute to continuous improvement, engineering standards, and best practices Collaborate cross-functionally with engineering, operations, and project teams Required Qualifications Bachelor's degree in Engineering or a related technical field 2-5 years of experience in industrial controls, automation, or robotics Strong troubleshooting skills across PLCs, process I/O, and robot communication Ability to create and interpret electrical and mechanical drawings, including wiring and plumbing schematics Experience supporting field-based or customer-facing automation projects Willingness and ability to travel as required Preferred Qualifications Hands-on experience with industrial robots (Fanuc, ABB, KUKA, Yaskawa/Motoman, or similar) PLC experience (Allen-Bradley, Siemens, or equivalent) Commissioning, startup, or applications engineering background Experience training operators and engineers on automated systems Familiarity with regulated or high-reliability manufacturing environments What Sets This Role Apart Competitive compensation: $85k-$128k base salary Exposure to advanced robotics and custom automation projects High degree of autonomy and ownership Strong investment in professional development and technical growth Opportunity to work on projects impacting cutting-edge industries Comprehensive benefits package including medical, dental, vision, 401(k) match, pension, PTO, and paid holidays You should be proficient in: Customer Service Bachelor's Degree Industrial Robot Programming PLC Programming Experience Machines & technologies you'll use: Programmable Logic Controller (PLC) (Allen Bradley, Siemens) Industrial Robot (Fanuc, ABB)

WHO IS JLM STRATEGIC TALENT PARTNERS & WHAT IS OUR ROLE We partner with National & International prime contractors to provide them with qualified talent they can trust. We accomplish this by sourcing & vetting high level career seeking candidates in the industry and match them with our partners current open roles. Our objective is to help our general contractor partners build out project teams for high level infrastructure projects across the US. We aspire to partner with candidates who are eager to learn, grow, and progress in their career path while deepening their knowledge in their given field. We deeply value our partnerships and place great emphasis on maintaining strong relationships and long term hires.This is reflective in our competitive offerings to our hires including: Ongoing HR support Competitive benefits packages including- Health, Dental, Vision & Life insurance Our very own JLM Rewards incentive program THE IDEAL CANDIDATE The ideal candidate has a proven track record of working in construction and/or transportation They thrive in a fast paced and a team oriented environment. They get excited about construction projects as well as completing assignments on time. An individual who will do well in this position is self oriented, organized, a great communicator, and approachable. Comfortable working within a team environment and visiting the project site. KEY RESPONSIBILITIES/SKILLS Assist the Lead Cost Estimator develop cost estimates Perform quantity takeoffs and market research Procure quotes from on material suppliers and subs Participate in risk mitigation meetings Participate in innovation vetting and implementation Work Assist the Lead Cost Estimator in development and optimization of the construction schedule Participate in cost negotiations and alignment with the Contractor Participate in cost reconciliation meetings and follow up with estimate revisions Provide constructability reviews Follow and help /implement quality control plan Other duties as assigned PERKS OF JOINING JLM We offer a competitive compensation package as well as benefits including Health Insurance, Vision, Dental, Life, and Paid Time Off! This is a remote position. Compensation: $35.00 - $55.00 per hour JLM is a DBE-accredited agency specializing in finding world-class talent and managing infrastructure project staffing needs. As the industry leader in staffing for architecture, engineering, and construction projects, JLM has 18,500+ pre-vetted, highly-skilled, and available people ready to power your project within 7 days.

This position works onsite at our Rolling Meadows, IL facility. Candidates must be able and willing to commute to the office. There is no relocation assistance available so we are not able to consider candidates who need to relocate to Rolling Meadows, IL area. The Controls Engineer IV develops the electrical design for automated equipment according to a customer and internal specification; develops and programs automated equipment hardware and software according to customer and internal specifications; capable of being the Controls Engineering Lead on any size machine or replication project, including large, multi-module systems. ESSENTIAL JOB DUTIES: Primary: Lead the development of controls architecture for multiple module systems and the engineering team. Program control and vision systems for cam, servo, and air operated stations, along with test and electrical devices. Ensure the electrical design and software architecture is functional, robust, and cost effective. Innovate and use good judgment to incorporate ATS Life Sciences Chicago standards and regulatory requirements. Research and specify appropriate purchased and preferred components. Create electrical wiring schematics, flow diagrams, panel layouts, bill of materials, organize release packages and update schematics. Participate in internal and customer design reviews, installations and service calls when needed. Guide Electricians in wiring and codes. Support software validation requirements. Work with suppliers to find/develop the most functional and economical solutions to design issues. Participate in the Project Execution Plan meeting, developing the controls engineering execution plan. Work under the confines of the execution plan schedule and budget.PLC'sroblem-solve with Mechanical Builders and Electricians, debug hardware and software issues, and update all appropriate documentation. Communicate ideas and comprehend information both verbally and in written form. Work closely with Mechanical Engineering and Assembly and exhibit objectivity and openness to others' views. Help guide and mentor Level I and Level II Controls Engineers with the execution of their projects. Secondary: Contribute to the development and maintenance of ATS Life Science Chicago internal and international standards. Set and maintain departmental goals in keeping with company objectives. Support and participate in quality management program. Provide necessary documentation and support for machinery operating manuals. Make recommendations for quality and cost improvements. Keeps abreast of current product developments. Domestic or International travel or extended workday if required. Adhere to International Standardization Organization (ISO) standards. Prioritize, plan and organize work and workspace. Comply with all ATS company policies. Full compliance with the terms and conditions within the employee signed work from home policy. Comply with all ATS Company policies. Other duties as assigned. QUALIFICATIONS: College degree in electrical engineering, engineering related field or equivalent experience. Six (6+) or more years of automation experience. Proficiency in Allen Bradley PLC's, HMI's, Servo control, electrical design and machine vision systems (Cognex or Keyence). Average skill level as defined by the Controls Engineering Skills Matrix: - Any one of the following: Hardware - 8, Software - 7, Vision - 8 - OR any two of the following: Hardware - 6, Software - 4, Vision - 6 Proficient with computers, including programs such as ePlan, AutoCAD, SolidWorks, Microsoft Office suite, etc. Can operate fax machine, copiers, and printers/plotters, etc. Proficient with inspection and measuring tools such as scales, calipers, micrometers, multi-meters, dB meters, etc. Travel 25% to 30% JOB SPECIFICATIONS: The employee may be required to stand, walk, push, pull, reach overhead, and bend to the floor. Exert up to 50 pounds of force occasionally, and/or exert up to 10 pounds of force frequently. Visual Acuity - Normal requirements for reading written instructions and computer screens. Hearing Ability - Normal requirements for understanding verbal instructions. Working Conditions - The employee is subject to a normal office environment with occasional exposure to high noise levels and/or physical hazards when visiting the manufacturing floor. Capable of wearing appropriate related PPE for extended periods of time. If you're excited about this role, but do not meet all the qualifications listed above, you are still encouraged to apply. Why YOU should join our ATS Life Sciences Systems team: We value our PEOPLE - The foundation of a great company is having the best team which is why we continuously work to develop, engage, empower and energize our people. The best people want to work with the best team - the best teams are diverse and inclusive teams. What we do MATTERS - our Life Sciences projects contribute to improving the lives of people around the world! ATS has made a commitment to be carbon neutral by 2030! INNOVATION and PROBLEM SOLVING is at our core - Our pursuit of continuous improvement in everything we do. Our focus is on building diverse teams, stimulating innovation by challenging conventional thinking, encouraging fresh ideas and promoting creative problem-solving. We prioritize internal GROWTH & DEVELOPMENT - ATS offers endless opportunities for professional growth and development - with a tuition reimbursement program, individual development programs and a commitment to promoting from within - there is space for you to grow your career at ATS! We offer COMPETITIVE Total Rewards - Starting salary for this position is $110,000 - $130,000 with, paid time off (PTO), employee incentive bonus program, comprehensive benefits (including health, dental vision and employee assistance program), a wellness reimbursement, tuition reimbursement, annual paid volunteer day off, 401K with employer match and optional employee share purchase program and more!!! A place to BELONG: We celebrate our differences and ensure that all employees have equal opportunities for growth and development. We believe that diversity of thought, background, and experiences is essential for our success and innovation. ATS is in compliance with the Americans with Disability Act (ADA) and will, upon request, assist those who may require specific accommodations due to a personal disability. We would ask that those who require assistance to notify our offices as soon as possible if accommodation is necessary. We are an equal employment employer. All applicants considered are subject to a pre-employment screening. We thank all applicants for their interest, however only those candidates selected for interviews will be contacted. Being authorized to work in the U.S. is a precondition of employment. Our company is not able to provide sponsorship to candidates wanting to work legally in the United States and needing an H1-B Visa

Join a dynamic, global team at Astemo through our Engineering Development Program, designed for early-career professionals in engineering, IT, and manufacturing. This program is focused on developing future leaders by offering hands-on experience, cross-functional exposure, and career growth opportunities in a fast-paced, innovation-driven environment. Participants will rotate through various departments and locations, gaining valuable insight into our products, technologies, and processes, while also building a strong foundation in our company culture and values. Program Highlights Personalized Career Development Plans Formal career discussions to guide your development path Project and assignment reviews led by cross-functional executive leaders Hands-on experience across multiple departments and live projects Domestic and potential international assignments Annual performance and compensation reviews Second-year salary adjustment to align with market rates Required Skills and Qualifications Bachelor's or Master's degree in Engineering (Mechanical, Electrical, Computer Science) or Information Technology 0-3 years of relevant experience; internships or co-op placements are a plus Strong communication and presentation skills Proficiency in Microsoft Office Suite Ability to manage time effectively and work independently with direction Strong teamwork and collaboration mindset Able to analyze and interpret complex technical documents Experience working in multicultural environments is a plus Working Conditions Physical Demands: Must be able to sit or stand for extended periods in a lab or office environment Occasionally required to lift or move items up to 25 pounds Remote work is permitted; however, physical presence is required when job duties demand on-site involvement Travel Requirements: Domestic travel up to 10% annually Potential for international travel quarterly (not including rotational assignments) If you're eager to build a career at the forefront of mobility innovation, we invite you to Own the Future with us at Astemo. Apply now and start your journey. Equal Opportunity Employer (EOE) - Qualified applicants will receive consideration without regard to their race, color, religion, sex, sexual orientation, gender, identity, disability, protected veteran status and national origin. At Astemo, we're challenging the status quo with the power of diversity, inclusion, and collaboration. Our goal is to build an inclusive work environment that celebrates the differences of our employees. We want to ensure that every employee feels valued, respected and empowered. We don't just accept difference-we celebrate it, we support it, and we thrive on it for the benefit of our employees, our products, and our community. Astemo is proud to be an equal opportunity employer. If you need a reasonable accommodation to apply for a job at Astemo, please send the nature of the request and contact information to ************************* when applying for the position.

What Makes a Honda, is Who makes a Honda Honda has a clear vision for the future, and it's a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.” We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team. If your goals and values align with Honda's, we want you to join our team to Bring the Future! Job Purpose The Design Research Senior Engineer in the CoE Division conducts sensing for NA market and consumer trends, extract emerging technologies, formulate hypothesis and propose research initiatives to provide value toward NA Honda's business direction. Key Accountabilities Conduct sensing for NA market and consumer trends, extract emerging technologies, and propose research initiatives. Continuously summarize and correlate sensing results and conclusions with internal stakeholders. Propose and carry out advanced research of emerging technologies utilizing Agile methodologies to prove hypothesis and define value with speed. Independently manage technical project resources while maintaining leading knowledge of state-of-the-art principles and theories. Propose new technology research themes for implementation into the Honda technical strategy through existing meeting structure and cadence. Develops and maintains strong relationships with internal and external research partners, industry experts, consortium members, university staff, and policy leaders to gather expertise and grow capability. Within defined technical pillar, identify root cause of highly technical and multidisciplinary problems and develop plans, designs, test systems, materials, techniques and processes to achieve objectives. Gain knowledge and expertise in emerging technologies, document findings, and inform others to grow the overall technical capability in North America. Qualifications, Experience, and Skills Minimum Educational Qualifications: Bachelor's of Science in Engineering field or equivalent relevant experience in science/engineering research capacity. Minimum Experience: 5 or more years with focus on digital chip architectures, benchmarking, open-source IP / ISA (RISC), ARM, familiarity with CPU / GPU / NPU, FPGAs, SoCs (System-on-Chip) and heterogenous integration. Familiarity with Assembly language. Other highly desirables: Prior experience with industry standard EDA tools (e.g. - Synopsys / Cadence &c) for IC chip design. Exp in HDLs - e.g. - Verilog / VHDL Other Job-Specific Skills: Passion for research, solving hard problems, and challenging the status quo. Ability to learn new topics of apply principles to design and manufacturing challenges. Working knowledge of Agile processes and methodologies Design experiments to test hypothesis and prove them out. Utilize agile process and methodologies to conduct sensing and research initiatives Confidently make autonomous decisions bounded by the research mission and understanding of the company business model. Ability to efficiently manage resources to achieve project initiatives and schedules Clearly communicate new research and technology concepts and ideas to technical team members and management. Scientifically analyze data provided from tests and experiments to gather knowledge and understanding of the subject of research. Oversee overall research project schedule, budget, and direction. Working Conditions This position will require the employee to work at our ADC, Raymond, OH office at least 4 days per workweek. One remote workday a week may be possible with prior departmental approval. What differentiates Honda and make us an employer of choice? Total Rewards: Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.) Paid Overtime Regional Bonus (when applicable) Industry-leading Benefit Plans (Medical, Dental, Vision, Rx) Paid time off, including vacation, holidays, shutdown Company Paid Short-Term and Long-Term Disability 401K Plan with company match + additional contribution Relocation assistance (if eligible) Career Growth: Advancement Opportunities Career Mobility Education Reimbursement for Continued Learning Training and Development programs Additional Offerings: Tuition Assistance & Student Loan Repayment Lifestyle Account Childcare Reimbursement Account Elder Care Support Wellbeing Program Community Service and Engagement Programs Product Programs Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Veregy is an award-winning NAESCO-Accredited decarbonization company focusing on accelerating and simplifying Energy Transition. We provide turnkey engineering and construction services designed to reduce our clients' energy and operating costs through the implementation of energy efficiency and infrastructure upgrades, smart building technology, fleet EV infrastructure, clean energy generation, and sustainability. Do you want to be part of a TEAM who delivers Eco-Friendly Environments that Transform Lives? Then you are in the right place…start the application process today! Summary of Position Functions The Engineer I - Industrial Controls participates in all phases of industrial control system projects including design, programming, commissioning, and post-project close out. This position is fully remote. Essential Position Functions Participates in project workflow and supports internal and external resources to ensure timely delivery of projects with high quality. Performs technical calculations supporting design including electrical requirements, specification of instrumentation, adherence to client and safety standards, and motor controls. Performs PLC, HMI, and SCADA programming in accordance with functional specifications and in conjunction with senior engineering team members. Creates customer documentation such as user manual, functional programming documents, and network diagrams. Architects programs that are simple to test, well documented, and versatile. Oversees and validates work by contractors during build, installation, and start-up of systems. Validates construction of control system enclosures per design (Factory Acceptance Testing). Tests and commissions custom products and systems onsite and at customer facilities (Site Acceptance Testing). Note: The statements contained herein describe the essential functions of this position but should not be an all-inclusive listing of work requirements. Individuals may perform other duties as assigned including work in other areas to cover absences or relief to equalize peak work periods or otherwise balance the workload. Non-Essential Position Functions Other duties as assigned. Supervisory Responsibilities Non at this time. Education and Qualifications To perform this position successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Bachelor's degree in electrical or mechanical engineering; or three+ years related experience and/or training; or an equivalent combination of education and experience. One (1) to three (3) years related job experience required. Experience with any of the following is preferred: Allen Bradley Studio, RSLogix, Factory Talk View, Connected Components Workbench, Inductive Ignition, Aveva Wonderware, MS SQL and other database, and various scripting. Knowledge, Skills, and Abilities Knowledge of Veregy's services and processes is required which can be obtained through intellect, technical inclination, and dedication to gain such knowledge. Knowledge (Intermediate to advanced) of various operating systems, software products (e.g. MS Office, etc.), is required. Fundamental knowledge of control and electrical system design and its application in automated industrial designs including power requirements, specification of VFD's, instruments, various control system components, and networking components. Knowledge of various industrial communication topologies and protocols such as Internet Protocol (IP) and Networking, Industrial Ethernet, Modbus, BACnet. Ability to work independently and efficiently manage time / workload. Ability to read, analyze, and interpret financial reports, business, professional, and technical documents. Ability to effectively respond to common inquiries or complaints from customers and staff. Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to write presentations, articles, routine reports, proposals, and correspondence. Ability to effectively present information and respond to questions from management and staff. Ability to speak and communicate effectively before customers and staff. Ability to calculate figures and amounts such as discounts and percentages. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of instructions and deal with several abstract and concrete variables. Ability to prioritize tasks and tactfully negotiate priority with end users. Ability to work under deadline pressure and extra hours if needed. Certificates, Licenses, Registrations Valid driver's license required. Travel Requirement Must be able to travel at least 40% - 50% of the time to project sites as required by the project schedule. Benefits Competitive Compensation. Paid Holidays, Paid Sick Leave, and Paid Time Off. Competitive Medical, Dental and Vision Plans. 401k Retirement Plan with Matching Employer Contributions (%). Employer Sponsored Life Insurance and AD&D Insurance. Employer Paid Short- and Long-Term Disability Insurance. Continued Education and Trade Certification Sponsorship (Specific Positions). Company Branded Trucks Provided (Specific Positions). Applicants must be currently authorized to work in the United States on a full-time basis. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Equal Employment Opportunity has been, and will continue to be, a fundamental principle at Veregy, where employment is based upon capabilities and qualifications without discrimination because of race, color, religion, sex, age, national origin, disability, veteran status, genetic history, sexual orientation, or any other protected characteristic as established by law.

at Samtec, Inc Founded in 1976, Samtec is a privately held, $1 Billion global manufacturer of a broad line of electronic interconnect solutions, including High-Speed Board-to-Board, High-Speed Cables, Mid-Board and Panel Optics, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers are dedicated to developing and advancing technologies, strategies and products to optimize both the performance and cost of a system from the bare die to an interface 100 meters away, and all interconnect points in between. With 40+ international locations and products sold in more than 125 different countries, Samtec's global presence enables its unmatched customer service. Summary/Objective: The Controls Engineer is responsible for the design, implementation, and support of control systems for advanced manufacturing equipment. This includes oversight of all controls-related aspects of automation projects-from initial scoping to detailed electrical design, software development, commissioning, and long-term support. The Controls Engineer is expected to deliver well-engineered, standards-compliant control systems that are reliable, sustainable, and scalable.Essential Functions/ Responsibilities: Lead the development of controls systems for automated equipment. Own all phases of controls development on assigned projects: from functional requirements and architecture through programming, power-up, and commissioning. Collaborate with mechanical and process engineering teams to define and document control system functional requirements. Specify electrical, pneumatic, thermal, and motion control components based on system requirements (e.g. controllers, motors, drives, heaters, sensors, actuators). Oversee creation and revision of electrical schematics. Control systems software design and development including programming PLCs, HMI/SCADA platforms, Motion Controllers, and servo drives. Execute system startup, debug, tuning, and machine qualification for new or upgraded automation systems. Provide troubleshooting and support for existing production machinery and control systems. Manage technical resources and coordinate timelines for controls-related project activities. Implement control system software changes to support upgrades, process improvements, or safety initiatives. Contribute to the creation and maintenance of software templates and standards for control system functionality, structure, and documentation. Ensure systems are designed with safety, sustainability, and long-term performance in mind, in compliance with standards such as NFPA 79, UL508A, and ISO 13849-1. “The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities” Required Experience: 5 years of direct experience as a controls engineer working on automated processes, equipment, and system integration in a manufacturing environment. Operational knowledge of servo motors, stepper motors, motion controllers, temperature controllers, pneumatic controls, control relays, sensors, operator interfaces, etc. Motion Controller programming experience. Operator Interface programming experience (Ignition and/or Red Lion preferred). PLC programming experience (IEC-61331-3 languages preferred). Knowledge of PID loop control and tuning. Experience reading and developing electrical schematics for internal and external builds. Experience with common industrial, IoT, and motion bus protocols (e.g. Modbus, MQTT/OPC-UA, EtherCAT/EthernetIP, etc.). Understanding of engineering documentation such as setup and adjustment procedures, calibration, software documentation, operating instructions, and maintenance procedures. Familiarity with machine safety applications, electrical power distribution, and control panel design. Understanding of Safety standards such as ANSI B11, ISO 13849-1, or IEC 62061. Familiarity with other relevant industry standards such as NEMA, NFPA 79, UL508A, etc. Resource management for project execution. Familiarity with software development tools, scripting languages, or database systems (e.g., Java, Python, .NET, SQL, web applications) is a plus-particularly where integration with enterprise systems or IT/OT convergence is involved. Proficient with written and verbal technical communication including generating reports and conducting group presentations. Must be able to sit/stand for at least 90 consecutive minutes, and not suffer from any sensory deprivation and/or paralysis of the limbs. Education: B.S. in Electrical Engineering, Software Engineering, or equivalent. SAMTEC, Inc. is an Equal Opportunity Employer and committed to creating a diverse environment. All employment decisions at Samtec are based in business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, pregnancy or parental status, age, disability, sexual orientation, gender and/or gender identity/expression, marital status, past or present military service, family medical history or genetic information, or any other status protected by applicable laws. Privacy Policy: *****************************************************

Descripción Puesto en Samtec, Inc Founded in 1976, Samtec is a privately held, $1 Billion global manufacturer of a broad line of electronic interconnect solutions, including High-Speed Board-to-Board, High-Speed Cables, Mid-Board and Panel Optics, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers are dedicated to developing and advancing technologies, strategies and products to optimize both the performance and cost of a system from the bare die to an interface 100 meters away, and all interconnect points in between. With 40+ international locations and products sold in more than 125 different countries, Samtec's global presence enables its unmatched customer service. Summary/Objective: The Controls Engineer is responsible for the design, implementation, and support of control systems for advanced manufacturing equipment. This includes oversight of all controls-related aspects of automation projects-from initial scoping to detailed electrical design, software development, commissioning, and long-term support. The Controls Engineer is expected to deliver well-engineered, standards-compliant control systems that are reliable, sustainable, and scalable.Essential Functions/ Responsibilities: Lead the development of controls systems for automated equipment. Own all phases of controls development on assigned projects: from functional requirements and architecture through programming, power-up, and commissioning. Collaborate with mechanical and process engineering teams to define and document control system functional requirements. Specify electrical, pneumatic, thermal, and motion control components based on system requirements (e.g. controllers, motors, drives, heaters, sensors, actuators). Oversee creation and revision of electrical schematics. Control systems software design and development including programming PLCs, HMI/SCADA platforms, Motion Controllers, and servo drives. Execute system startup, debug, tuning, and machine qualification for new or upgraded automation systems. Provide troubleshooting and support for existing production machinery and control systems. Manage technical resources and coordinate timelines for controls-related project activities. Implement control system software changes to support upgrades, process improvements, or safety initiatives. Contribute to the creation and maintenance of software templates and standards for control system functionality, structure, and documentation. Ensure systems are designed with safety, sustainability, and long-term performance in mind, in compliance with standards such as NFPA 79, UL508A, and ISO 13849-1. “The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities” Required Experience: 5 years of direct experience as a controls engineer working on automated processes, equipment, and system integration in a manufacturing environment. Operational knowledge of servo motors, stepper motors, motion controllers, temperature controllers, pneumatic controls, control relays, sensors, operator interfaces, etc. Motion Controller programming experience. Operator Interface programming experience (Ignition and/or Red Lion preferred). PLC programming experience (IEC-61331-3 languages preferred). Knowledge of PID loop control and tuning. Experience reading and developing electrical schematics for internal and external builds. Experience with common industrial, IoT, and motion bus protocols (e.g. Modbus, MQTT/OPC-UA, EtherCAT/EthernetIP, etc.). Understanding of engineering documentation such as setup and adjustment procedures, calibration, software documentation, operating instructions, and maintenance procedures. Familiarity with machine safety applications, electrical power distribution, and control panel design. Understanding of Safety standards such as ANSI B11, ISO 13849-1, or IEC 62061. Familiarity with other relevant industry standards such as NEMA, NFPA 79, UL508A, etc. Resource management for project execution. Familiarity with software development tools, scripting languages, or database systems (e.g., Java, Python, .NET, SQL, web applications) is a plus-particularly where integration with enterprise systems or IT/OT convergence is involved. Proficient with written and verbal technical communication including generating reports and conducting group presentations. Must be able to sit/stand for at least 90 consecutive minutes, and not suffer from any sensory deprivation and/or paralysis of the limbs. Education: B.S. in Electrical Engineering, Software Engineering, or equivalent.

Pioneer your career! Körber is the home for passionate people who innovate, collaborate, and love what they do. Entrepreneurial spirit is our joint DNA. We develop future technologies and support talents to deploy their skills and reach their full potential. Together, we aim to be the first to do the right thing at the right time. Join the home for entrepreneurs! The Controls Engineer II is responsible for developing control system designs, deploying and commissioning PLC code, and creating graphical user interfaces for material handling systems. This role will test code functionality prior to deployment, troubleshoot on-site, and collaborate with Electrical Engineering to design and implement control network architecture. The Controls Engineer II will also define electrical device requirements, support cost and effort estimates, review customer standards, and develop recommendations to improve productivity and reduce costs. Your role in our team * You will design and deploy control systems, including programming and commissioning PLC code, developing graphical user interfaces, and validating or emulating code functionality before deployment and on-site testing * You will troubleshoot PLC code and electrical system functionality during on-site commissioning, supporting equipment and system testing to ensure timely project completion * You will collaborate with Electrical Engineering resources to define electrical device requirements, support control network architecture design, and review complex customer standards, specifications, and documentation to determine system requirements * You will contribute to cost and resource estimates for complex module development and commissioning activities, while monitoring system design cost alignment with equipment and engineering service project budgets * You will execute software quality processes through module, subsystem, and system-level test procedures * You will develop recommendations that enhance productivity, reduce costs, and improve customer satisfaction Your profile * You have obtained a bachelor's degree or equivalent in Electrical Engineering, Controls Engineering, or a related field with five (5) years of work experience in the material handling or a related industry, or 3 years of relevant work experience with a Master's degree * You have experience with Rockwell Automation PLC programming (including GuardLogix) and Siemens TIA Portal programming (including Starter) * You have experience with Ethernet/IP network architecture * You have experience interpreting electrical schematics and a solid understanding of HMI programming * You have proven ability to collaborate cross-functionally with project management, engineering teams, installation crews, and external partners * You have demonstrated strong written and verbal communication skills with both internal teams and external stakeholders * You understand and support project financial tracking and schedule management while maintaining high service standards * You can travel up to 40% annually, including short-term assignments with 10/4 rotations as project needs require Eligible applicants must be currently authorized to work in the United States on a full-time basis. The employer will not sponsor applicants for work visas for this position. Your working environment at Körber Körber is shaping the future of end-to-end supply chain automation across Europe, North America, and Asia with our cutting-edge material handling solutions and system integration expertise. Set new industry standards and champion customer-centric services and solutions with our dynamic Automation team based in Sandy Springs, Georgia, USA. This full-time, exempt role offers a remote work setting. Your benefits * You will enjoy a flexible work environment that supports your work-life balance; we offer paid time off for parental leave and 22+ days off for personal time and holidays, including a week-long winter holiday closure * You will have access to medical, dental, and vision insurance plans with FSA or HSA options, and a 401(k) plan with a company match of up to six percent * You are provided with several company-paid benefits, including vision insurance, short and long-term disability, basic life insurance plans, and educational and employee assistance programs Can you see yourself in this profile? Then Körber is the right place for you. We look forward to getting to know you! Equal opportunity employer We are an Equal Opportunity Employer and are committed to ensuring equal employment opportunity to all applicants. All hires to our team are based on qualifications, merit, and business needs. It is our policy to give equal employment opportunities to all qualified persons without regard to legally protected characteristics, or any other consideration made unlawful by applicable federal, state/provincial, and/or local law. Prior to the next step in the recruiting process, we welcome you to inform us confidentially if you may require any special accommodations in order to participate fully in our recruitment experience, please contact us via ****************. We work with selected partners and therefore ask recruitment consultancies to refrain from contacting us by mail or telephone. Disclaimer: The duties listed above are intended only as representation of the essential functions of this position. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or a logical assignment to the position. The job description does not constitute an employment agreement between the employer and employee and is subject to change at the sole discretion of the employer. Nothing in this document alters an employee's at-will employment status. Please note that the salary information is a general guideline only. Individual compensation will be determined by various factors such as scope and responsibilities of the position, experience, education, skills, location, and market and business considerations. Applications must be submitted via our career site. Applicants must be legally authorized to work for ANY employer in the U.S., this position is not eligible for Visa Sponsorship. Apply now and join our team! Ready for your next step? Click on 'Apply now' to get started right away! As long as the position is advertised, you can apply at any time. We value diversity and therefore welcome all applicants - regardless of gender, nationality, ethnic or social origin, religion/belief, disability, age, sexual orientation and identity, and any other protected status. If you have any questions or technical problems, please send us an e-mail to ****************. Alyssa Cuevas is the responsible person for this job advertisement. We work with permanent partners and therefore ask recruitment consultants to refrain from contacting us by e-mail or telephone. You can find out more about our culture here Culture at Körber - it's worth taking a look! We are Körber - an international technology group with around 13,000 employees at over 100 locations worldwide and a common goal: we turn entrepreneurial thinking into customer success and shape technological change. In our Business Areas Pharma, Supply Chain, and Technologies, we deliver products, solutions and services that inspire and create added value for customers. We build ecosystems that solve the challenges of today and tomorrow. Körber AG is the holding company of the Körber Group.

Business Unit: Complaints Trending Employment Type: Contract Duration: 12 months with possible extensions or conversion to FTE Rate: $36-42 W2 with benefits Posting Date: 04/12/2025. Notes: Only qualified candidates need apply. Onsite 80% of time as needed (local candidates). 3 Key Consulting is hiring! We are recruiting an Engineer, Technical Investigator Medical Device for a consulting engagement with our direct client, a leading global biotechnology company. Ideal candidate: 3 years of experience performing failure analysis investigations within a medical device environment, specifically class II or class III devices. Proficient with ISO systems, risk analysis processes, and protocol or report writing. A bachelor's degree in engineering or sciences such as chemistry, physics, or biology is strongly preferred, though candidates with other educational backgrounds who possess robust laboratory experience will also be considered. Experience working in biohazard lab settings is a plus, but not mandatory. Excellent written and verbal communication skills, along with strong presentation abilities, are essential as the role involves regular presentations to internal teams. Candidates must have a background in medical devices, biotech, or biopharma industries and must be local, able to commute onsite 2-3 days per week (ideally residing within Los Angeles, Orange, or Ventura Counties). This role will begin as a one-year contract, with the potential for extension. Engineer - Complaints Technical Investigator: Requires a combination of working remote and going onsite 2 to 3 times per week (average) for complaint returns assessment and/or laboratory equipment setup, development and validation of test methods. Job Description: Our client is currently seeking an Engineer - Complaints Technical Investigator in our Complaints Trending and Investigation group. In support of Company's mission to serve patients, we are a diverse team working to continuously improve our clinical and commercial drug delivery devices in order to ensure supply and to optimize the patient experience. The Engineer - Complaints Technical Investigator conducts forensic evaluations of complaint units for Standard and Advanced complaint investigations associated with product design and/ or usability issues. This role understands customer/ patient use of Company's packaged and/or distributed products, as well as manufacturing processes for these products. Responsibilities also include helping with Root Cause Analysis, investigation lab infrastructure, equipment setup, and method development and validation. Top Must Have Skill Sets: 3+ years of experience in failure analysis investigation within a development or manufacturing environment, working with Medical Devices, ideally Class II and Class III Experience with risk management per ISO 14971 (System Risk Analysis, User Risk Analysis, DFMEA/FMEA and other Risk Management tools) Experience with protocol and report writing, process and test development and execution, and design of experiments Day to Day Responsibilities: Lead evaluation of returned product, product reserve sample inspections, batch records and review of complaint histories and trends Provide input to engineering for product improvements Partner with device engineering to develop structured failure analysis processes and tools for current and future device platforms Lead root cause analysis to identify the failure mode for Company's products and associated components due to product complaint Perform failure analysis to identify root cause using processes and tools such as fishbone diagrams, “5 Whys”, risk assessments such as FMEA's, Fault Tree Analysis, or tolerance analysis. Additional equipment such as CT scanners, Instron tensile test machines and SEM may be used. Lead cross functional ideation of design solutions to reduce complaints based on output of root cause analysis, determine feasibility of options through testing and analysis, develop business plans for implementation Generate final reports in accordance with established procedures, which may include data collection and statistical analysis of the data Help with investigations lab equipment setup, develop and provide equipment training to personnel, develop and validate test methods, and develop SOPs for equipment use. Basic Qualifications: Master degree OR Bachelor degree and 2 years of experience OR Associate degree and 6 years of experience OR High school diploma / GED and 8 years of experience Preferred Qualifications: Master's Degree in Science 3 years experience in complaints or failure analysis investigation within a development or manufacturing environment, working with Medical Devices, ideally Class II and Class III Understand customer / patient use of Company's packaged and/or distributed products Understand manufacturing processes for Company's packaged and/or distributed products Proven experience with medical devices Demonstrated Six Sigma proficiency specifically for root cause analysis methodology Experience with risk management per ISO 14971 (System Risk Analysis, User Risk Analysis, DFMEA/FMEA and other Risk Management tools) Experience with protocol and report writing, process and test development and execution, and design of experiments Experience in leading continuous improvement activities by driving the implementation of process and product quality improvement initiatives Strong technical writing and interpersonal skills Why is the Position Open? Supplement additional workload on team. Red Flags: Must be local to ATO or willing to relocate immediately. Must be willing to be on site 2-3 days per week. Must be familiar with good laboratory practices (GLP) Interview Process: Interview with Sr. Engineer, Lab Captain, and Associate Director of C&TI and others as necessary. We invite qualified candidates to send your resume to *****************************. If you decide that you're not interested in pursuing this particular position, please feel free to take a look at the other positions on our website ******************************* You are also welcome to share this opportunity with anyone you think might be interested in applying for this role. Regards, 3KC Talent Acquisition Team

Job Description RCS Staffing has an immediate need for a Substation Engineer - Protection & Controls - 19406. This is a full time, direct hire, remote position with our client. This position offers a competitive package including benefits, vacation, and holidays. Overview of YOUR role as a Substation Engineer - Protection & Controls: The Substation Engineer will work closely with the Project Engineer(s) and Management to ensure technical deliverables are completed in a timely manner, always striving to exceed client expectations. As a primary technical contributor, the Substation Engineer will continuously review and understand industry and client standards, trends, and leading-edge technologies. Attention to detail is critical to ensure client satisfaction, and the engineer's leadership will be crucial during iterative design and quality assurance checks. This role offers the opportunity to develop your skillset and realize your potential in a fast-paced environment. During the first six months, you will engage with one to two key clients to learn their needs and build strong relationships, setting the foundation for growth. As a Substation Engineer YOU will: Coordinate with P&C Designer/Drafter to develop various drawings. Collaborate with internal and external project teams (Inter-Disciplinary and Cross-Disciplinary). Provide technical support for procurement and construction. Travel domestically to client locations as needed. Development of: One-line and Three-line Diagrams Potential and Current Schematics Control Schematics Alarm Schematics Communications Schematics Panel Front Views Control House Layouts Wiring Diagrams Equipment Specifications Protection and Control Specifications (Preferred) I/O Mapping (Preferred) Points Mapping (Preferred) Relay Settings (Preferred) Documentation for Design Calculations Construction Documentation (Sequence and RFP) Bill of Material Calculations: DC battery sizing and battery charger sizing AC & DC system analysis AC station service transformer sizing Overcurrent protection Voltage drop and cable sizing CT/VT saturation and burden Short-circuit analysis (Preferred) Arc flash analysis (Preferred) YOU are the ideal Substation Engineer candidate if you have: Bachelor of Science in Electrical Engineering At least 5 years of substation experience. A desire to meet performance objectives and exceed client expectations. It's a BONUS if you have: Experience with short-circuit analysis and arc flash analysis. A professional engineer certification or are on the path to licensure. About our CLIENT Our Clients mission is to provide premium engineering design and consulting services to the power industry, offering innovative, cost-effective solutions to our clients and delivering each project on schedule or sooner, and at the utmost level of safety and quality. Who WE Are RCS Staffing is a certified Women-Owned Small Business (WOSB) specializing in the recruitment of professionals for best-of-class companies throughout the United States. Since 1994, RCS recruits top talent for direct hire, temp-to-perm and contract staffing positions and provides customized payroll services. Our Recruiting Specialties consist of all Engineering Disciplines, Project Management, Project Controls, Information Technology, Energy Efficiency and Business Professionals. RCS is an equal opportunity employer that prohibits discrimination and harassment of any type. RCS recruits, hires, and promotes for all positions without regard to race, color, religion, creed, national origin, citizenship status, disability, military status, veteran status, marital status, sexual orientation, gender identity, sex, genetic information or age. All terms and conditions of employment such as compensation, benefits, work assignment, availability of facilities and privileges of employment are administered on the same basis of equality. Other Job Titles: Senior Protection & Controls Engineer - Substations Power Systems Engineer - Protection & Controls Electrical Engineer - Substation Design Lead Substation P&C Engineer Substation Electrical Engineer Protection & Control Systems Engineer Substation Project Engineer - P&C Electrical Engineer - Power Systems & Controls Relay and Controls Engineer - Substations Power Infrastructure Engineer - Substation Protection

**A Snapshot of Your Day** The controls engineer will be part of Customer Technical support, as the name may imply, we respond to our customer's needs for technical support. Your day may start with an email from our distributor in Japan looking for technical clarifications for some recently purchased engines, followed by a local customer within Indiana who's having trouble starting an engine. Either way, our customers look to us in times of difficulty. Globally supporting our customers can sometimes feel like an immense task, but we act as a team, and no one is expected to know all the answers. Of course, there are also the less mundane tasks such as reviewing service bulletins and manuals prior to being released. Its fair to say Siemens Energy is a great place to work with a very supportive management team that knows the value of a work life balance. **How You'll Make an Impact** + Provide global technical support for the SGT-A05 (nee Allison 501) gas turbine portfolio owned by customers in the oil / gas and the distributed power generation industries. + Travel to customer sites to resolve technical issues. + Provide technical advice to other departments such as Sales, Design Engineering, Project Engineering, Parts and Operations Departments. + Provide support for the Siemens Energy Regional Technical Support teams and Support field service engineers at customer sites. This will primarily relate to control and performance issues. + Provide advice and support to the technical writer for the SGT-A05 range of gas turbines. + Act as an interface between engineering, overhaul repair facilities and the packagers of the SGT-A05 gas turbines for performance related topics. **What You Bring** + Engineering degree in mechanical and/or electrical engineering is required + 8+ years of experience with PLC architecture and coding is required (Allen Bradley based experience preferred). + 8+ years of experience with rotating equipment strongly preferred. + Applicants must be legally authorized for employment in the United States without need for current or future employer-sponsored work authorization. Siemens Energy employees with current visa sponsorship may be eligible for internal transfers. Remote work may be available. **About the Team** The Small Engine Business has a legacy dating back seventy years with our core product being the power plant for the original Lockheed Hercules that first flew in 1953. The Small engine business continues to evolve with ongoing multi-million-dollar R&D programs that will ensure the product will be in service in fifty years' time. With a solid history and an even brighter future I cannot imagine there has been a better time to join the great little team here in Indianapolis. Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Check out this video to learn more about our Gas Service business ************************************************************************ **Who is Siemens Energy?** At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: ******************************************** **Rewards/Benefits** + Career growth and development opportunities + Supportive work culture + Company paid Health and wellness benefits + Paid Time Off and paid holidays + 401K savings plan with company match + Family building benefits + Parental leave ************************************ Equal Employment Opportunity Statement Siemens Energy is an Equal Opportunity and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law.

TSC is seeking a remote based Guidance, Navigation, Controls (GNC) Engineer that will design, integrate, test, and deliver flight control systems or mission-critical onboard software for unmanned aerial systems (UAS). The ideal candidate will have experience in UAS Guidance, Navigation, & Control (GNC) utilizing inertial navigation, vision, collision avoidance, commercial autopilots, redundancy management and path planning architecture. The GNC Engineer will participate hands-on in the full software life cycle, from concept through implementation, integration to flight test and operational release. This will be a remote based position with up to 25% travel required. As a GNC Engineer you can anticipate some of your day-to-day responsibilities to include: Work on a team to develop, modify and tune guidance and control systems for fixed wing aircraft Work on a team to develop, modify and tune navigation systems based on sensor fusion of 6-DOF IMU, magnetometer, GNSS, pressure and ranging sensors. Work on a team to develop and modify 6-DOF and Hardware-in-the-Loop simulation environments Simulation, analysis, control, and testing on 6 degree-of-freedom (6-DOF) motion platform for development and validation of autonomous UAS. Work on a team to design and develop flight or mission-critical onboard software for unmanned systems Aid development for unmanned aerospace includes guidance, navigation & control, mission sequencing, payload control, redundancy and contingency management, uplink and downlink packet encoding and decoding, converting between different serial protocols, hardware-in-the-loop simulation, ground-based GUIs, and aircraft subsystem control (i.e., payload, electrical systems) Embedded Software development (C/C++, Python, shell scripts) Writing/modifying software to adjust flight behaviors: Use development tools such as: JIRA, git, C/C++, CMake, Linux, MATLAB Collaborate with a multi-disciplinary software team on large, multi-language projects Participating in code reviews, Flight Testing, and Customer Presentations Bench test, Hardware-in-the-loop, and field testing of UAS platforms Local, interstate, and international travel to support field testing and customer demonstrations. Expected travel is ~10-25%. Collaborate with other engineering disciplines (Systems, Software, Mechanical, Electrical) in planning, design and development of systems to ensure software and hardware performance and compatibility Design software architecture, interfaces, and gateways for communication with external Autonomy software services. Implement functionality using a model-based approach. Software verification and validation including writing Test Cases and Test Procedures Develop, implement, and document data and software application test plans to validate project deliverables meet quality standards Oversee and support processes and procedures for existing data and reporting activities to support internal and external customer deliverables. Examples of specific deliverables include but are not limited to: recurring reports and analyses; data validation and documentation Interface and derive solutions in coordination with hardware design teams Required Qualifications BS degree in Mechanical, Electrical, Computer, Aerospace, Controls engineering or other relevant discipline, plus at minimum 12 years of experience in a professional environment developing MATLAB / Simulink control systems with auto code experience; or MS in Controls or Aerospace Engineering plus 2 years' experience. Embedded code experience preferred. US Citizenship and the ability to obtain and maintain a DoD Security Clearance Experience in developing physics based 6 DOF simulations, motion platforms. Experience developing with: Gazebo or similar simulation tools, MatlabMATLAB/Simulink, C, C++, Python Experience developing scripts to run batch processes Experience in data post processing from simulation or flight testing, report summary writing Experience developing guidance and autonomy algorithms required; in denied environments preferred Preferred Experience Minimum two years of demonstrated, hands-on professional experience in at least one (ideally a combination) of the following areas: Model-based design and/or test using the Simulink/Stateflow tool chain. Software development in a relevant subject matter area: Aircraft Guidance Navigation & Control or other robotic system guidance, navigation and control; ground- or airborne mission systems; general aerospace flight control or cockpit avionics systems; ground stations; payload control. Development/operations of hardware-in-the-loop simulators, conducting testing and troubleshooting of HW/SW interfaces. Familiarity with software configuration management tools, version control systems, defect tracking tools, and peer review required. TSC Benefits: TSC offers a stable work environment, a competitive salary, and a comprehensive benefit package; including ESOP participation, 401k Plan, Flexible Work Schedules, Tuition Reimbursement, Co-Sponsored Health Plan, Paid Leave and much more. Applying to TSC: Only those candidates invited for an interview will be contacted. Employment at TSC is contingent upon the successful completion of a comprehensive background check, security investigation, and a drug screening. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description Controls Engineer Amsted Rail-Griffin Wheel , the leading manufacturer of railroad wheels in North America, is currently seeking a qualified individual for the position of Controls Engineer for our Groveport foundry. The Controls Engineer provides technical support to manufacturing operations. Provides for continuous improvement of manufacturing operations through the design, selection and installation of new equipment and systems and the modification of existing equipment and systems. Provides support to maintenance operations. Creates and/or maintains current documentation of equipment and systems. Why join us? Competitive Compensation 100% Employee Ownership - You'll receive company shares in addition to your salary! Lucrative Incentive Bonus Opportunity Generous 4% 401k Match HSA Option Over 150 Years of Proven Business Success And Many More Benefits Responsibilities will include: Provides for the continuous improvement of processes, procedures, and equipment. Assures maximum reliability of equipment, processes and procedures. Provides engineering support to operations in the troubleshooting, rebuilding and repair of electrical equipment and automated systems Design, develop and deploy machine and gauge control systems; integrated automation including robotics and servo controls; HMI systems; and data collection systems, according to company design standards Provides complete project management for new machine and system modifications, installations and upgrades. Creates and/or maintains current documentation of processes and operating procedures. Maintains a high level of personal and professional knowledge of related technologies and manufacturing systems. Performs other assigned duties as determined by the manager Provide training as required for plant personnel in operation of the HMI and SCADA equipment Requirements for this position are: BS in electrical engineering or equivalent professional qualifications Minimum of 2 years' experience commissioning and troubleshooting machine/ process controls Fluent in editing and developing PLC programs Able to deliver complete and accurate electrical system drawing packages If you possess the required qualifications and interested in applying for this opportunity, must apply online at ************************** Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) Amsted Rail is an Equal Opportunity Employer #ff-dd

This is an Engineering Test Technician role is in the Product Integrity department of the Power Management business unit. The Product Integrity team setups and executes test cases to validation new AC Power products. Products may have a regional scope or a global scope. The Engineering Test Technician will setup the unit under test and the instrumentation as per the test plan. They will operate the unit under test and collect data as per the individual test cases. While executing the test cases, the technician will make observations and keep notes regarding the unit under test's performance. All of the data collected and the technician's notes are entered into the test results by the technician. The technician participates in daily standup meetings, keeps their work areas clean and safe, and assists with keeping all the test labs clean and safe. This position will be based onsite at our Delaware, OH location. This will be a 2nd Shift position will hours being 3:00pm - 12:00am. There will be training for 2-3 months on 1st shift to start. Responsibilities: Follow safety policies. Setup the unit under test and other equipment which entails connecting large cables (up to 50lbs). Setup instrumentation (oscilloscopes, power meters, CTs, voltage probes, and other equipment). Execute test cases, operate unit under test, operate the instrumentation, collect data, and document the results. Troubleshoot and correct problems with test setups and with units under test. Suggest continuous improvement opportunities. Requirements: Associate of Science majoring in Electronics or Electrical Engineering or military certification achieved. 1 to 3 years of relevant experience. Broad knowledge of electrical and mechanical test techniques. Experience with 208/230/480V/600V 3-phase 60/50 Hz wiring and equipment. Experience with 120v 1-phase 60Hz wiring and equipment. Experience with instrumentation and low volt wiring. Experience with electrical safety tools and techniques. Proficient with Microsoft Word and Excel General mechanical skills assembling and disassembling electrical equipment including but not limited to, high power electronics, large magnetic components, circuit boards, high current wiring etc. Must have good working knowledge and skills in testing of electrical equipment. Must be able to read electronic and electrical schematics. Good troubleshooting skills related to AC and DC power circuits. Basic experience setting up and using oscilloscopes, power meters for 3 phase measurements. Shift/Schedule flexibility for short periods/projects is a plus PHYSICAL & ENVIRONMENTAL DEMANDS Ability to lift 50lbs. Ability to stand and/or walk while performing tasks 70% of the time. TIME TRAVEL REQUIRED 5-10% The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES • Customer Focus • Operational Excellence • High-Performance Culture • Innovation • Financial Strength OUR BEHAVIORS • Own It • Act With Urgency • Foster a Customer-First Mindset • Think Big and Execute • Lead by Example • Drive Continuous Improvement • Learn and Seek Out Development About Vertiv At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $8.0 billion in revenue, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. Equal Opportunity Employer Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************. #LI-RB1

The Engineering Test Technician is responsible for setting up and executing test cases to validate new high-power AC power products, including UPS, Static Switch, and PDU. The technician will set up the unit under test and instrumentation according to the test plan, operate the unit, collect data, and make observations regarding performance. All collected data and notes are entered into test results. The technician participates in daily meetings, maintains a clean and safe work area, and contributes to maintaining the safety of all test labs. Responsibilities + Set up the unit under test and other equipment, involving the connection of large cables up to 50lbs. + Set up instrumentation, including oscilloscopes, power meters, CTs, voltage probes, and other equipment. + Execute test cases, operate the unit under test, and collect data while documenting observations. + Troubleshoot and correct issues with test setups and units under test. + Follow 5S and safety policies. + Suggest opportunities for continuous improvement. Essential Skills + Associate of Science in Electronics or Electrical Engineering, or military certification. + 1 to 5 years of relevant experience. + Broad knowledge of electrical and mechanical test techniques. + Experience with 208/230/480V/600V 3-phase 60/50 Hz wiring and equipment. + Experience with 120V 1-phase 60Hz wiring and equipment. + Experience with instrumentation and low voltage wiring. + Experience with electrical safety tools and techniques. + Proficiency in Microsoft Word and Excel. + Mechanical skills for assembling and disassembling electrical equipment. + Ability to read electronic and electrical schematics. + Good troubleshooting skills for AC and DC power circuits. Additional Skills & Qualifications + Bachelor's or Associate's degree in Electronics. + 2+ years of electronics experience. + Experience in electronic testing. + Knowledge of electrical circuitry. Work Environment This role is based in a manufacturing environment within a clean facility, working alongside 12 other engineers and technicians. The work schedule is Monday through Friday, from 7am to 4pm Job Type & Location This is a Contract to Hire position based out of DELAWARE, OH. Pay and Benefits The pay range for this position is $31.00 - $31.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in DELAWARE,OH. Application Deadline This position is anticipated to close on Jan 23, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.