Associate designer jobs in Maryland - 204 jobs

A highly proficient, self-motivated professional who consistently upholds high standards, the Design Associate + Signage independently supports all phases of commercial interior design and signage services. This role demonstrates proficient expertise in space planning, design development, and project administration while delivering creative and insightful solutions that meet or exceed project objectives. A successful candidate can efficiently organize and track project details, clearly communicate with stakeholders, and ensure compliance with code and company standards. Responsible for the provision and support of interior design and signage services in the following areas: Enhance leasing efforts with tailored design solutions for prospective tenants Deliver innovative interior and signage strategies and maximize asset value and user experience Maintain accurate building plans and documentation to support company-wide accessibility Provide adaptive design expertise for corporate, development, and redevelopment initiatives as needed. The Design Associate + Signage actively partners with colleagues and industry experts to identify best practices and emerging trends, while independently resolving routine challenges and escalating complex issues as needed. Proficiency is further shown through effective prioritization, resource management, and the ability to adapt to evolving requirements, ensuring consistent quality and continuous improvement across all design and signage projects. ESSENTIAL FUNCTIONS: Interior Design Services Manages and executes all phases of commercial interior design services including space planning, schematic design, design development, construction documentation review, and project administration while adhering to applicable life safety and building code requirements. Proactively seeks input at key milestones to ensure clarity and compliance and develops and documents innovative design solutions that consistently exceed project objectives, customer needs, and company standards for quality, schedule and budget. Independently organizes, tracks, and reports project information with minimal supervision, while providing regular status updates and critical milestones to internal stakeholders. Manages project workflows and resources autonomously, prioritizing tasks, allocating resources efficiently and resolving issues quickly and effectively. Collaborate with co-workers and industry experts to identify best practices for impactful workplace environments and emerging design trends which support continuous improvement initiatives. Maintains the integrity of square footage data and documentation by effectively applying BOMA standard of measurement, independently resolving typical issues and consulting with others for complex or unusual scenarios. Signage Services Oversee all aspects of signage project management, including planning, procurement, and coordination of signage solutions such as wayfinding, tenant identification, regulatory, and branding signage. Ensure consistency and quality across the property portfolio by managing timelines, resources and stakeholder communications throughout each project phase. Ensures all signage design and installation methods comply with relevant codes, regulations and company standards while routinely consulting with internal and external teams for interpretation of complex or evolving requirements. Independently organizes, tracks, and reports project information with minimal supervision, while providing regular status updates and critical milestones to stakeholders. Maintains clear and timely communication with stakeholders, resolving most project issues independently and escalating critical information when broader organizational objectives or significant challenges are involved. Coordinates review and feedback process for signage deliverables, independently addressing routine comments and involving key internal and externals stakeholders for feedback that may impact project scope, budget or compliance. As-Existing Record Management Maintain up-to-date and accurate as-existing building plans, ensuring all modifications and updates are properly documented and accessible. Support and enforce compliance with project standards and procedures for Kahua, BIM, and CAD platforms, ensuring all records meet organizational and industry requirements. Adhere to, and actively participate in, the development and continuous improvement of data and file management standards and guidelines related to design services. SECONDARY RESPONSIBILITIES Participate in the development and maintenance of process improvement. Provide assistance to other departments with special projects as required. Represent company culture and promote the company to potential tenants at meetings and industry events. Participates in and supports design related professional organizations and community outreach events. Perform other job-related duties as assigned. QUALIFICATIONS: Education - Bachelor/master's degree in interior design or architecture from a CIDA or NAAB accredited program. Graphic design experience is a plus. Professional Experience - 4-7 years post-graduate professional design related experience within the commercial office industry Knowledge and or experience with Building Owners Management Association (BOMA) square foot standard application a plus. Computer Skills - PC proficiency to include, but not limited to, Microsoft Office applications (Word, Excel, Outlook, etc.) and web-enabled applications. Proficient working knowledge of Revit and AutoCAD required. Proficient working knowledge of InDesign and Photoshop Experience with Kahua is a plus. Ability to easily adapt to new and changing technology platforms. Mobility - Travel between locations to physically inspect building site exterior and interior space. Other Requirements - Excellent customer service capability with both internal and external customers as well as various levels of professionals Ability to work independently, in a team environment and interact across an organization. Skilled in the visual and verbal communication of design. Excellent written and verbal communication skills (i.e. adapting to communication styles of others and clearly communicating goals and objectives). Demonstrates a high degree of organization, planning, creativity, judgment & time management. Willingness and ability to travel to support assigned portfolio. Pay Range: $75,000 - $90,000 CDP proudly offers to all employees working a minimum of 30 hours per week market-leading health benefits including medical, dental, vision and prescription, etc.

GPLA, a part of the DPR family of companies, is seeking a passionate Structural Design Intern. As a Structural Design Intern you will collaborate with a team of architects, engineers, and drafters to transform design concepts into detailed structural plans and specifications. You will utilize computer-aided design (CAD) software and other industry-standard tools to develop accurate and efficient structural designs. Attention to detail, problem-solving skills, and a strong understanding of structural engineering principles will be crucial in this role. The Structural Design Intern role will primarily focus on gaining exposure to the variety of approaches and tasks involved in structural design through the completion of specific design tasks in close coordination with their project manager. They will gain familiarity with a variety of material types, design approaches, project phases, and project scales, while actively participating in their project teams. Supervisory Responsibilities: None. Duties & Responsibilities: Drafting, miscellaneous design, conceptual studies, structural steel and reinforcing detail. The creation and/or revision of calculations, drawings, and specifications from conceptual design to construction documents and plan check responses; and construction administration tasks under close supervision and coordination with their project manager. Assist in the development of structural designs for various construction projects, including buildings, bridges, and other infrastructure. Collaborate with architects, engineers, and drafters to translate design concepts into detailed plans and specifications. Utilize CAD software and other tools to create 2D and 3D models of structural designs. Perform calculations and analyses to ensure structural integrity and compliance with building codes and regulations. Contribute to the preparation of construction documents, including drawings, specifications, and technical reports. Review and revise designs based on feedback from senior designers and project stakeholders. Participate in site visits and meetings to gain practical knowledge and understand project requirements. Stay updated with industry trends and advancements in structural design techniques and technologies. Collaborate with team members to meet project deadlines and deliver high-quality design solutions. Depending on depth of experience, a facility with AutoCAD, Revit, and a variety of engineering analysis programs, including RAM Structural System, RAM Concept, and RISA; and familiarity with current standards of practice, including ASCE 7, ASCE 41, CBC, ACI, AISC, and NDS. Required Skills & Abilities: Strong understanding of engineering principles and structural design concepts. Proficiency in computer-aided design (CAD) software, such as AutoCAD or Revit. Familiarity with structural analysis software is a plus. Excellent problem-solving and analytical skills. Attention to detail and the ability to work accurately under pressure. Good communication and interpersonal skills for effective collaboration within a team. Ability to adapt and learn quickly in a dynamic work environment. A strong work ethic and a desire to grow and develop as a structural designer. Education & Experience: Pursuing Master's degree in Structural Engineering. Physical Requirements: Prolonged periods sitting at a desk and working on a computer. Must be able to lift up to 15 pounds at times. #GPLAistheFuture #LI-MM1 DPR Construction is a forward-thinking, self-performing general contractor specializing in technically complex and sustainable projects for the advanced technology, life sciences, healthcare, higher education and commercial markets. Founded in 1990, DPR is a great story of entrepreneurial success as a private, employee-owned company that has grown into a multi-billion-dollar family of companies with offices around the world. Working at DPR, you'll have the chance to try new things, explore unique paths and shape your future. Here, we build opportunity together-by harnessing our talents, enabling curiosity and pursuing our collective ambition to make the best ideas happen. We are proud to be recognized as a great place to work by our talented teammates and leading news organizations like U.S. News and World Report, Forbes, Fast Company and Newsweek. Explore our open opportunities at ********************

Empower, Innovate, Impact! At Team A-TEK, we EMPOWER people to drive INNOVATION that IMPACTS mission! A-TEK operates at the intersection of mission and innovation by applying our deep domain expertise across the federal markets. Embracing our digital-first strategy, A-TEK provides enhanced capabilities in application development, digital transformation, enterprise IT, and scientific services. Our solutions are designed to modernize, automate, secure, protect, and enhance the operations of our federal clients, ensuring they stay ahead in a rapidly evolving digital landscape. Our work is fueled by a passion to serve our clients' needs and to protect the safety and welfare of Americans. That passion shapes how we nurture our most valuable asset - Our Employees. A-TEK actively cultivates the talent that drives our success and fosters a creative, challenging, and mission-driven work environment for current and future employees. The CAD/BIM Coordinator is responsible for developing accurate AS-IS condition drawing sets in support of facility management and ongoing building operations. This role consolidates original construction documents, record drawings, and documented field modifications into coordinated drawing sets, with a strong emphasis on Mechanical, Electrical, and Plumbing (MEP) systems. The position requires a strong understanding of how building systems are documented and how these records are used by facility and maintenance teams. The CAD/BIM Coordinator works closely with cross-functional teams and on-site maintenance staff to establish efficient workflows that support repairs, asset tracking, and day-to-day facility operations. Deliverables must be accurate, consistent, and suitable for long-term facility use. Required Qualifications Bachelor's degree in Mechanical, Electrical, Architecture, or related engineering discipline or equivalent work experience. Minimum of 5+ years of experience working with mechanical, electrical, and plumbing (MEP) systems in existing facilities 5+ years of proficiency in AutoCAD, including production, coordination, and maintenance of MEP drawing sets Demonstrated experience producing and maintaining existing-condition and record drawing documentation Strong ability to interpret MEP construction documents, record drawings, and field markups Ability to accurately document system layouts, equipment locations, and major distribution paths Solid knowledge of Revit for model navigation, review, coordination, and exporting drawings to CAD and PDF formats Strong ability to read, interpret, and manage architectural, structural, and MEP drawing sets Experience consolidating information from multiple drawing sources into a single coordinated deliverable Ability to coordinate with facility maintenance staff and incorporate field-verified information into drawing updates Strong attention to detail and documentation accuracy Ability to manage multiple tasks and meet established schedules in an active facilities environment Preferred Qualifications Experience with space management workflows Familiarity with asset tracking and IWMS/CAFM systems Experience working in occupied facilities Compensation Salary Range: $85,000 - $90,000 annually (commensurate with experience) Benefits: Health, dental, and vision insurance; 401(k) with employer match; paid time off; professional development opportunities. #LI-OnSite A-TEK, Inc. is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or status as a qualified individual with a disability, or Vietnam era or other protected Veteran status. Verification of education may be requested before or during the hiring process.

JobID: 210665883 JobSchedule: Full time JobShift: Base Pay/Salary: MD $60,800.00-$105,000.00; NY $60,405.80-$105,000.00; NJ $54,200.00-$105,000.00; CT $60,800.00-$105,000.00; RI $60,800.00-$92,000.00; Washington,DC $68,400.00-$105,000.00; IL $54,200.00-$92,000.00; MN $54,200.00-$92,000.00; CO $56,485.00-$92,000.00; NV $54,200.00-$85,000.00; WA $77,968.80-$105,000.00; CA $68,640.00-$105,000.00; HI $60,800.00-$92,000.00 We are seeking a dynamic and experienced Travel Designer to join our elite team! The ideal candidate will have a passion for luxury travel and a keen understanding of the needs and expectations of ultra-high net worth clientele. As a Luxury Travel Designer within FROSCH, you will be responsible for crafting tailor-made travel experiences that exceed our members' expectations and ensure unforgettable journeys. These experiences will include booking air (private and commercial), accommodations (hotels, resorts, private residences and villas), private yachts, luxury cruises, transportation, meet and greet services, private tours, dining, entertainment (concerts, Broadway shows, etc.) as well as assisting with staffing (private chefs, babysitters and beauty related specialists). Private Client Services (PCS) is an exclusive membership-based division within FROSCH specializing in curating bespoke luxury travel experiences and concierge services for ultra-high net worth individuals (UHNWI) and families worldwide. Our clients include corporate executives, professional athletes, dignitaries, and other high profile elite individuals. With a focus on building relationships with our members through personalized service and attention to detail, we provide exclusive access to the most luxurious destinations, accommodations, and experiences across the globe. PCS prides itself on our commitment to delivering round-the-clock dedicated assistance to our members, managed exclusively by our exceptional team. Job Responsibilities * Conduct comprehensive consultations with members to understand their travel preferences, interests, and expectations. * Design bespoke travel itineraries and experiences tailored to each client's preferences, including flights, ground transportation, accommodations, dining, activities, and special requests. * Demonstrate the capacity to effectively collaborate within a team-oriented atmosphere. * Be prepared to serve as the primary point of contact for a select group of members, proactively engaging with them to cultivate strong, personalized relationships. * Take on the responsibility of handling invoices and managing all financial elements of the trips, aiming for both transparency and efficiency in budgeting. * Possess a thorough understanding of the lifestyles, expectations, and preferences of UHNWI, tailoring services to meet their sophisticated needs. * Stay informed about luxury travel trends, destinations, and properties worldwide in order to provide expert recommendations and insider knowledge to clients. * Provide white-glove service and support to clients throughout their travel journey, including pre-trip assistance, on-site concierge services, and post-travel follow-up. * Anticipate and address any issues or concerns that may arise during travel, ensuring seamless and stress-free experiences. * Leverage established partner relationships and vendor agreements to secure optimal availability, rates, and additional perks. * Demonstrate clear and professional communication skills when interacting with clients and vendors, excelling in phone and email etiquette and delivering exceptional customer service. Required Qualifications, Skills and Capabilities * Minimum of 7 years of experience in luxury travel planning or related field, with a proven track record of serving high net worth clientele. * Proficiency in a Global Distribution System (GDS) such as Sabre. * Proficiency in MS Office Suite and other CRM technology (Monday.com), with the ability to adapt as needed. * Possess extensive worldwide travel experience, enabling a deep, personal understanding of diverse cultures, destinations, and customs to deliver bespoke, culturally rich travel experiences that align with the unique lifestyles and preferences of our esteemed members. * Strong communication, interpersonal, and relationship-building skills. * Efficiently manage tasks, adhere to deadlines, and make informed decisions, maintaining clear communication even in high-pressure situations. * Compiling and consolidating multiple pieces of information and creating a coherent and accurate client travel itinerary, utilizing the templates provided. * Detail-oriented with the ability to multitask and prioritize in a fast-paced environment. * Monitor an extremely busy email inbox, differentiate urgent requests, and respond, action or file messages as necessary. This includes filing and maintaining correspondence and other documentation in the appropriate client trip files. * Assist in accurately keeping track of an extremely busy client travel calendar, to ensure timely booking and confirmations of arrangements. * A readiness to be accessible to our clients beyond regular office hours.

Salary Description $55,000 - $75,000 per year

Requirements Required Qualifications: Experience in fuze component design, prototyping, and testing for fuze component testing. Specific knowledge of the testing of energetic components during live firings for tactical systems is preferred. Engineering knowledge and work with engineering design software, microprocessors, instrumentation, data analysis. Experience with MAVlink a plus. Engineering knowledge of how to write test procedures, test plans, conduct test readiness reviews, and write test reports. Engineering knowledge in how to conduct testing in accordance with approved standard operating procedures (SOPs). Engineering knowledge in the software control and functioning of fuze components. Minimum Education: High school diploma. Current engineering students or recent college graduates with a Bachelor of Science in Electrical, Computer Science, or Mechanical Engineering from an accredited college or university preferred. The candidate must be a US citizen with the ability to obtain and maintain a Security Clearance. The candidate must be willing to submit to random drug testing. EHS Technologies Corporation is an Affirmative Action/Equal Opportunity Employer.

Job Description At Whitman, Requardt & Associates, LLP, we are "People Focused and Project Driven". We have been in business for 110 years and we are known for our quality work and quality employees. This is your chance to join our team - help us to design the infrastructure and buildings that improve the world! We are seeking a Utility Infrastructure Designer/Engineer who has experience with water, sanitary sewer, storm drainage, gas, electric, communications, steam, hot/chilled water, duct banks, and other utility systems for government and private clients throughout the Mid-Atlantic region. Responsibilities: The Utility Infrastructure Designer/Engineer will be engaged in the planning, design, permitting/approvals, and construction phase services for a wide range of unique and challenging underground utility infrastructure projects. The projects include new installations, repairs, upgrades, modifications, and reconfigurations that will support sustainable urban infrastructure, including renewable energy sources. Requirements: High School degree or state equivalency certificate required Bachelor's degree in civil engineering or related field preferred Minimum of 4 years of experience with utility design or related work Experience working with MicroStation and/or AutoCAD a plus Exceptional communication, technical writing, presentation, and organizational skills Experience with Microsoft Office (Word, Excel, Outlook) Positive attitude and willingness to work cooperatively with others Ability to handle multiple assignments Must be a US citizen Benefits: WRA recognizes that employees play an important role in its success. Our commitment to full-time employees is reflected in the comprehensive benefits package we offer: Flexible work schedule options Competitive salary Leave accrual and paid holidays Healthcare benefits Group Life Insurance, as well as additional optional life Insurance, short and long term disability insurance Flexible spending accounts for medical and dependent care reimbursement 401(k) Retirement Plan Tuition Reimbursement Employee Assistance Program Parental and maternity leave benefits WRA is an equal opportunity/affirmative action employer and complies with all applicable anti-discrimination laws. The expected compensation range for this position is $55,000.00 - $80,000.00 annually. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience Applicants must be currently authorized to work in the United States on a full-time basis without the need for employment-based visa sponsorship now or in the future. WRA will not sponsor applicants for U.S. work visa status for this opportunity. (no sponsorship is available for H-1B, L-1, TN, O-1, E-3, H-1B1, F-1, J-1, OPT, CPT or any other employment-based visa) ***** Not accepting resumes from 3rd party recruiters for this position ***** Position #: 2357

Benefits: Competitive salary Free uniforms Opportunity for advancement Training & development FASTSIGNS #131901is hiring for a Full-time Graphic Designer to join our team! Benefits/Perks: Competitive Pay Paid Vacation and Holiday Performance Bonus Ongoing Training Opportunities A Successful FASTSIGNS Graphic Designer Will: Create computer-generated full-color graphics and/or vinyl output that can be printed and mounted to a substrate or weeded, cut and applied Complete or modify designs from customer drawings, files, or exact output of customer-provided design for output to media Determine size and arrangement of illustrative material and copy, select style and size of type, and arrange layout based upon available space, aesthetic design, and production requirements. Inspect jobs for accuracy before sending them to output. Ensure correct material is used for each job and output device settings are accurate Maintain customer logo library; convert graphic files Ideal Qualifications for FASTSIGNS Graphic Designer: 1-2 years of graphic design experience High School diploma or equivalent Proficient in Adobe Illustrator Ability to prioritize jobs, multi-task, and work autonomously Determine the best output method based on the customer's needs Sit and view a computer screen for long periods (4 hours or more) Ability to work under pressure to output high volume, high-quality work Do you enjoy working with people? Do you enjoy helping people solve problems by offering advice and consultation? Are you looking for a job that offers constant learning, skills growth and a career path? If so, we are looking for employees just like you in the ever-changing Sign Industry. Apply today! Compensation: $15.00 - $20.00 per hour At FASTSIGNS, every day is unique and presents exciting opportunities, including new ways to use your talent and grow your skills. We have a large network of independently owned locations - both locally and internationally - who offer competitive pay and ongoing training opportunities. Are you ready to plan for your future? Discover your next career. Make your statement. Learn more by exploring the positions offered by FASTSIGNS centers. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to FASTSIGNS Corporate.

In this role, you will be using your skills and expertise to develop highly complex designs. These cover a very wide range, from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll create and review layouts, drawings, and models for clarity, completeness, and accuracy. You'll identify design errors, omissions, and other deficiencies, and recommend revisions and/or improvements in designs. Responsibilities of the Designer: This position will focus on component and system tooling design for aircraft modification and component sub-assembly operations. The successful individual will guide design and development of Jigs, Fixtures, Lifting devices, and Semi-Automated Equipment. Under general supervision, provides engineering design concepts in support of manufacturing process and tooling. Develops CAD Model concepts, 3D Xperience, 3D modeling and detailed 2D drawings. Responsible for design completeness through fabrication, including tool and process tryout. Provides technical support to product engineering for producibility through manufacturing, test and field use. Assists in tool acceptance criteria for in-house fabrication or outside procurement of special tools. Qualifications of the Aircraft Inspector: Bachelor's of Science degree in Mechanical Engineering or related discipline and typically 6 or more years of relevant experience Practical knowledge of engineering principles and practices Experience with Computer Aided Engineering tools Familiarity working in multi-disciplinary design and development teams Ability to obtain a US Secret Clearance Benefits of the Aircraft Inspector: Paying up to $103/hr Health, Dental, Vision Insurance Matching 401K Onsite role in Hagerstown, Maryland 5 month+ contract #IND1

Job DescriptionDescriptionChainbridge Solutions Inc. is seeking an energetic and highly motivated individual to join us as a Space Designer working onsite at the Department of Energy (DOE) in their Washington DC office as well as their Germantown, MD office. There is no option to work remote as this position requires onsite presence 5 days a week, predominantly at the Germantown location. The successful candidate will coordinate all assigned projects related to space planning, design, alterations, and buildouts in DOE's facilities within the National Capital Region. They will be responsible for supporting the complete lifecycle of building projects, including design, procurement, award, kickoff, execution and monitoring, inspection, and close-out. This individual will also serve as a key point of contact for stakeholders throughout DOE, presenting design alternatives before project approval and keeping them updated during project execution. Key Responsibilities Provide design alternatives, recommendations, and cost estimates. Update Customer and Space Planning Manager on all assigned projects. Use AutoCAD to develop professional space diagrams for engineering review. Review materials samples and provide complete design recommendations based on customer design standards or aesthetic direction. Work closely with government management to provide daily update on project progress, issues, and risks that may impact the overall success of a project. Develop project estimates based on existing contract costs and prior experience. Review contractor estimates for potential errors. Enter procurement requests into DOE's procurement system. Monitor progress on each request in order to update schedule status or escalate problems. Identify project stakeholders, federal and contractor, and manage communications, reporting, and status updates. Establish routine meeting schedules where necessary to enable regular updating of project progress. Skills, Knowledge and Expertise H.S. diploma or equivalent. Bachelor's degree in business or engineering preferred. 2+ years' experience in facilities-related design. Skilled in AutoCAD. Excellent verbal and written communication skills, along with experience communicating directly with customers in high-pressure environments. US Citizenship required, preferably with a prior Federal background investigation Willing to be processed for a Public Trust Clearance Physical Requirements: Frequently remain in a stationary position, often standing or sitting for prolonged periods of time looking at a computer screen Walking through the client building occasionally to survey the building and provide updates. Continuous verbal and written communication with others to exchange information. Continuous repetitive movements that may include the wrists, hands, and/or fingers. Comprehension - Must continuously be able to understand direction and adhere to established procedures. Organization - Must continuously be able to gather and classify information. Reasoning and Decision Making - Must continuously use logic to analyze and interpret information and prioritize.

We are seeking a Designated Authorizing Official (DAO) 3 for a prime contract that is based out of our Columbia, MD office. As a DAO3., you will serve on a team that is responsible for the Authorization and Assessment process under the Risk Management Framework (RMF) for new and existing information systems and will be expected to maintain Authority to Operate compliance for all assigned systems. Responsibilities: * Responsible for assisting in identifying the overall security requirements for the protection of data, to ensure the implementation of appropriate information security controls, and perform and analyze the security risk assessment, risk analysis, risk management process, security control assessments, and awareness activities for systems and networking operations. * Provide assistance to ensure Cybersecurity functions are included in the configuration management process. * Interact with customers, Information Technology (IT) staff, and high-level corporate officers in defining and achieving required Cybersecurity objectives for the organization. * Contribute to building security architecture. * Assist with the integration of legacy systems. Contribute to the acquisition/RDT&E environment and building Cybersecurity into systems deployed in operational environments. * Prepare security authorization documentation. Here's What You'll Need: * Eight (8) years of related work experience as an IT Risk Assessor, System Security Engineer, Information Systems Security Manager or DAO. * A Bachelor's degree in Computer Science, Information Technology Engineering, or related field. * In lieu of a Bachelor's degree, an additional four (4) years of experience for a total of twelve (12) years. * DoD 8570.1 compliant IAM Level III certification, such as the GSLC, CISM, CISSP (or associate) certification. * US Citizen with an active TS/SCI with Poly * Working knowledge of the following is required: system security design process, defense-in depth/breadth, engineering life cycle, information domains, cross-domain solutions, controlled interfaces, identification, authentication and authorization, system integration, ICD 503 (formerly NISCAP), risk management, intrusion detection, contingency planning, incident handling, configuration control, change management, auditing, security authorization process, principles of Cybersecurity (confidentiality, integrity, non-repudiation, availability, access control), and security testing Must be able to: * Analyze Cybersecurity built into systems to be deployed to operational environments * Prepare risk assessment, plan of actions, authorization recommendations, and related security authorization documentation * Identify and support overall security requirements for the protection of data to ensure the implementation of information security policies, activities, and controls * Ensure Cybersecurity functions are included in the development and risk management process, particularly those focusing on infrastructure protection and defensive IT strategy * Facilitate interaction with customers, IT staff, and high-level corporate officers to assist in defining and achieving required risk management objectives for the organization * Support integration of legacy systems within respective IT environment. Pay Transparency Amentum's health and welfare benefits are designed to invest in you and in the things you care about. Your health. Your well-being. Your security. Your future. Eligible employees and their dependents may elect medical, dental, vision, and basic life insurance. Employees are able to enroll in our company's 401k plan, and, if eligible, a deferred compensation plan and Executive Deferral Plan. Employees will also receive 17 days of vacation per year, seven paid holidays, plus floating holidays and caregiver leave. Hired applicants will be able to purchase company stock and have the opportunity to receive a performance discretionary bonus. The base salary range for this position is $177K to $220K. This range reflects the minimum and maximum target for new hire salaries for the position across all US locations. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training.

Designer III Pay Rate: $103.45 per hour We are seeking an experienced Designer III to join our team in Hagerstown, MD. In this role, you will contribute to the development of highly complex designs spanning advanced mission payloads, electronic systems, integrated aircraft, and orbital or space exploration systems. This position requires strong technical expertise, creativity, and attention to detail to ensure the accuracy and completeness of engineering designs. Duties & Responsibilities Develop highly complex designs for a wide range of aerospace and defense applications. Create and review layouts, drawings, and models for clarity, completeness, and accuracy. Identify design errors, omissions, and other deficiencies; recommend revisions or improvements. Guide design and development of jigs, fixtures, lifting devices, and semi-automated equipment. Provide engineering design concepts supporting manufacturing processes and tooling. Develop CAD model concepts, including 3D modeling and detailed 2D drawings using 3D Xperience or similar tools. Participate in design conception and assist in developing processes within a team environment. Ensure design completeness through fabrication, including tool and process tryout. Provide technical support to product engineering for producibility through manufacturing, testing, and field use. Assist in defining tool acceptance criteria for in-house fabrication or external procurement. Required Skills & Qualifications Strong background in component and system tooling design for aircraft modification and component sub-assembly operations. Experience guiding design and development of tooling and mechanical systems with general direction. Proficiency in CAD tools such as 3D Xperience, with strong 3D modeling and 2D drafting capabilities. Ability to work collaboratively in multi-disciplinary design and development teams. Demonstrated ability to support design from concept through fabrication and testing. Education & Experience Required: Bachelor of Science in Mechanical Engineering or a related discipline, and typically 6 or more years of relevant experience. Higher education may substitute for relevant experience. Practical knowledge of engineering principles and practices. Experience with Computer-Aided Engineering (CAE) tools. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, genetic information, veteran status, or any other characteristic protected by applicable law.

Job Description Skills: This position will focus on component and system tooling design for aircraft modification and component sub-assembly operations. Work is performed with general direction and exercises considerable latitude in determining objectives and approaches on assignments. The successful individual will guide design and development of Jigs, Fixtures, Lifting devices, and Semi-Automated Equipment. Under general supervision, provides engineering design concepts in support of manufacturing process and tooling. Develops CAD Model concepts, 3D Xperience, 3D modeling and detailed 2D drawings. Is active in design conception as well as assisting in the development of processes, working in a team environment. Responsible for design completeness through fabrication, including tool and process tryout. Provides technical support to product engineering for producibility through manufacturing, test and field use. Assists in tool acceptance criteria for in-house fabrication or outside procurement of special tools. Education: Bachelor's of Science degree in Mechanical Engineering or related discipline and typically 6 or more years of relevant experience Higher education may substitute for relevant experience Practical knowledge of engineering principles and practices Experience with Computer Aided Engineering tools Familiarity working in multi-disciplinary design and development teams Overview: In this role, you will be using your skills and expertise to develop highly complex designs. These cover a very wide range, from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll create and review layouts, drawings, and models for clarity, completeness, and accuracy. You'll identify design errors, omissions, and other deficiencies, and recommend revisions and/or improvements in designs. Physical/Mental/Emotional Requirements: Frequently walk, sit, stand, climb stairs and steps. Frequently repeat same hand, arm, and finger motion many times to include finger and hand dexterity. Rarely lifting or carrying up to 20 lbs. Working Conditions: Rarely exposed to fumes or hazardous chemicals/materials. Rarely exposed to loud noises

Job Description The Advanced Designer will be participating in the new product development and product maintenance and will be responsible for delivering designs. These designs must keep manufacturability, cost and speed to market in mind while maintaining the highest level of accuracy. KNOWLEDGE & SKILLS Required Knowledge/Skills: Attention to detail. Good working knowledge of 3D modeling software with parametric modeling Intermediate Excel - able to create & develop spreadsheets with some ability to write/revise simple formulas. Working understanding of manufacturing and assembly processes such as sheet metal fabrication parts & assemblies Able to independently design components/ assemblies that are part of the overall product based on general direction of the design intent. Ability to develop and review Bill of Material structure for highly engineered product design with several hundred variations and options within a product line. Ability to effectively consider cost when designing non-critical components in optimizing cost (such as sheet metal gauge selection) Able to take guidance & implement optimization of product design considering labor & material tradeoffs, with mistake-proof design (Poka-yoke) and DFMA design (design for manufacturing & assembly) Ability to work with other team members in collaborative discussions to share design ideas and develop sound design criteria and decisions. Ability to load/Edit data in MRP Systems such as SAP or Oracle is preferred. Working proficiency with 2D AutoCAD (or equivalent) Preferred Knowledge/Skills: Autodesk Inventor experience Hands-on experience with Autodesk Vault Industrial refrigeration / HVAC components and assemblies Design Industry experience Advanced Excel skills Required Experience/Certification: Technical certificate with 3+ year experience (2000 hr working experience in 3D design) or a Bachelor's degree with 1+yr experience Associates Degree or equivalent Diploma with CAD certificate preferred or min 3 Years (4000 hrs.) of hands-on CAD experience. NATURE & SCOPE The Advanced Designer reports directly to the Design Team Lead. He or she will also report indirectly work with NPI team and/or project manager of any projects in which he or she participates. He/she will interact extensively with designers in the U.S. and Global teams. PRINCIPAL ACCOUNTABILITIES All Groups: Design complex sub-assemblies and product modules with general direction of design intent per BAC's and industry's standards Explore the impact that proposed designs will have on other subsystems, parts and assemblies in making sound design choices Provide support for prototype & pilot builds and occasional job support for customer orders. Support product improvement and cost-out opportunities Provide dedicated support to the assigned NPI program Team(s) including members from multiple functions such as Engineering, Manufacturing, Marketing, Project management, core technologies, lab, Field issues and Warranty Services etc Estimates scope of work and efforts for given assignments. Maintain a detailed record of work. Use goals in project specification and collaborate design efforts with designers and engineers. Create designs that consider all product variation across current product lines, and meets the most variants possible to address competing priorities of features, while minimizing part count and product cost ADDITIONAL RESPONSIBILITIES Travel periodically to BAC manufacturing facilities during prototype or pilot assembly and assist with prototype/pilot build. WORKING CONDITIONS Bac has flex work policy - 3 days in office and 2 days work from home. Working hours are the standard BAC 40 hours per week (8:30am-5:00pm with flexible start/finish times allowed) Travel, both domestic and international can be up to 10% of the time Occasional evening/weekend hours may be required, although can often be done from home with the use of a portable computer. Primarily Sedentary Activity in the office will be experienced; however occasional travel to BAC manufacturing facilities with assembly (medium work) is required. The worker is required to have close visual acuity to perform 3D computer modeling The worker will typically be subjected to only indoor conditions; however on occasional trips to BAC manufacturing facilities, the worker may experience heat, cold, humidity, and noise.

If you are Competitive, Influential, Organized with Outstanding Interpersonal Skills, we want you to join our team as an Area Sales & Design Specialist! We offer an unlimited commission program. WHAT YOU WILL DO AS AN AREA SALES & DESIGN SPECIALIST In this role, you will be responsible for driving sales growth and providing exceptional design consultation services to our clients. You will work on-site at assigned Home Depot stores, within a specific territory, managing relationships with Home Depot store leaders and associates, leveraging Home Depot employees and customer traffic to generate leads and sales. Weekend work required. WHAT'S IN IT FOR YOU? Eligible for a Sales Performance Incentive Bonus Eligible to receive Earned Commissions. A weekly minimum guaranteed subsidy payment (if earned commissions are less than the minimum guarantee.) Annual compensation could potentially be between $43,000 - $50,000 with commission. Hands-on training program by Local and Regional leaders. Great benefits package and mileage reimbursement. WE ARE COUNTING ON OUR AREA SALES & DESIGN SPECIALISTS FOR: Working on-site, at assigned Home Depot stores including weekends, holidays, and some evenings. Manage a sales pipeline. Regularly plan, coordinate, execute lead generating events and leverage event sales. Self-direction and the ability to work independently and build relationships. Enjoy training others and communicating product knowledge. Proven computer skills and the aptitude to learn new software. Partner with Home Depot leaders providing updates on sales performance, merchandising and displays. Ensure our Tuff Shed displays are presentable, clean, and maintained; signage is updated. JOB REQUIREMENTS Availability to work standard retail hours, including weekends, holidays and some evenings. Proven relationship building skills Current valid driver's license and a satisfactory Motor Vehicle Report Tuff Shed offers a great Benefits package for our full-time employees! - It pays to be a Tuff Shed team member: OUR COMPETITIVE BENEFITS AND REWARDS Competitive compensation and bonus programs (based on position) Medical Benefits including Virtual Visits- The care you need-when, where and how you need it! Dental & Vision Benefits Flexible Savings Account (FSA) Employee Stock Ownership Plan (ESOP) - You're more than an employee - Get rewarded for long and loyal service with ownership interest in the Company Paid Time Off and Paid Holidays. 401(k) plan On-Demand Access to Your Pay! - Why wait until pay day? Learn more about us at ***************** As part of the application process, please take a short survey, called Predictive Index. Click on the following link to complete this five-seven minute survey: ************************************************************************************************ SLS2021

Company TSMC Technology, Inc. Employment Type Intern Posted Dec 19, 2025 Overview of Role As a Mixed-Signal Design Intern, you will contribute to the design and mixed-signal verification of integrated circuit and systems for power constrained environments and edge applications. You may also work with the team on developing and implementing AI algorithms and possibly co-processors to improve power-performance of such systems. You will report to the section Manager of the mixed signal and digital design division of the Advanced Connectivity Department in Austin, Texas. We are currently operating in a hybrid work schedule with 4 days in office. This Internship Program is open to students currently enrolled in a reputable University that are graduating in 1 year with a MS/PhD degree (2027 graduation). The Summer 2026 internship will begin in May 2026 and continue through August 2026 with the possibility of extending further beyond. Responsibilities * Literature review, and contribution to the development and verification of circuits, systems and algorithms to improve energy efficiency of power constrained applications. * Work with team members with expertise in device, circuit, and AI system architecture * Documentation Minimum Qualifications * PhD degree in Electrical/Electronic Engineering OR MS degree in Electrical Engineering * Solid background in electronic device fundamentals * Solid mixed signal and digital design fundamentals * Good understanding of AI algorithms and systems Preferred Qualifications * Hands on experience in mixed-signal tape-out in planar or Finfet technologies * Basic understanding of SoC integration and physical design * Ability to work with Matlab and simulink design environments * Ability to work with Python, PyTorch or similar environments Company Description As a trusted technology and capacity provider, TSMC is driven by the desire to be: * The world's leading dedicated semiconductor foundry * The technology leader with a strong reputation for manufacturing excellence * Advancing semiconductor manufacturing innovations to enable the future of technology TSMC pioneered the pure-play foundry business model when it was founded in 1987 and has been the world's leading dedicated semiconductor foundry ever since. The Company supports a thriving ecosystem of global customers and partners with the industry's leading process technologies and a portfolio of design enablement solutions to unleash innovation for the global semiconductor industry. With global operations spanning Asia, Europe, and North America, TSMC serves as a committed corporate citizen around the world. In North America, TSMC has a strong sales and service organization that works with customers by helping them achieve silicon success with cutting-edge technologies and manufacturing excellence. The Company has continued to accelerate its R&D investment and staffing in recent years and is expanding its manufacturing footprint to support customer innovation with 3D IC technologies and optimal manufacturing capacity. For positions requiring access to technical data subject to export control regulations, including Export Administration Regulations, TSMC North America may have to obtain export licensing approval from the U.S. Government for certain individuals. All employment is contingent upon TSMC North America obtaining any export license or other approval that may be required by the U.S. Government. Diversity statement TSMC Technology, Inc. is committed to employing a diverse workforce and provides Equal Employment Opportunity for all individuals regardless of race, color, religion, gender, age, national origin, marital status, sexual orientation, gender identity, status as a protected veteran, genetic information, or any other characteristic protected by applicable law. TSMC is an equal opportunity employer prizing diversity and inclusion. We are committed to treating all employees and applicants for employment with respect and dignity. If you require reasonable accommodation due to a disability during the application or the recruiting process, please feel free to notify us at G_Accommodations@tsmc.com. TSMC confirms to all applicants its commitment to meet TSMC's obligations under applicable employment law. Reasonable accommodations will be determined on a case-by-case basis. Pay Transparency Statement At the time of this posting, this role typically pays an hourly rate between $37 and $44 per hour. The range displayed reflects the minimum and maximum target for new hires. Actual pay may be more or less than the posted range. Factors that influence pay include the individual's skills, qualifications, education, experience and the position level and location. * *

GPLA, part of the DPR Family of Companies, is a leading firm in the field of structural engineering, dedicated to delivering innovative and efficient solutions for a wide range of construction projects. We are seeking a motivated Structural Designer Intern to join our dynamic team. As an Intern, you will collaborate with a team of architects, engineers, and modelers to transform design concepts into detailed structural plans and specifications. You will utilize computer-aided design (CAD) software, such as Tekla Structures, and other industry-standard tools to develop accurate and efficient structural designs. Attention to detail, problem-solving skills, and a strong understanding of structural engineering principles will be crucial in this role. This role will primarily focus on gaining exposure to the variety of approaches and tasks involved in structural design through the completion of specific design tasks in close coordination with a project manager. You will gain familiarity with a variety of material types, design approaches, project phases, and project sizes, while actively participating in project teams. Responsibilities will include but may not be limited to the following: Supervisory Responsibilities None. Duties and Responsibilities Assist in the production of drawings, specifications, and calculations during a project's design phase life cycle from conceptual design to completion of construction documents under close supervision and coordination with the Project Manager or Structural Project Engineer. Responsibility will include tasks that are specific and clearly outlined. Assist in the completion of various construction administration tasks, such as, reviewing shop drawings and submittals, responding to RFIs, and making site visits, under close supervision and coordination with the Project Manager. Depending on depth of experience and knowledge base, assist in the development of structural designs and analytical models for various building types and materials. Review and revise designs based on feedback from senior designers and project stakeholders. Perform calculations and analyses to ensure structural integrity and compliance with building codes and regulations. Utilize CAD software and other tools to create 2D drawings and 3D models. Learn the basic use of Tekla Structures software. Collaborate with team members, including engineers, modelers and detailers, to meet project deadlines and deliver high-quality design solutions within budget. Participate in internal project design meetings to gain practical knowledge and understanding of project requirements. Learn about industry trends, code updates, and advancements in structural design techniques and technologies by actively participating in professional development activities to enhance skills and knowledge in structural engineering and project management. Required Skills and Abilities Basic knowledge of structural engineering principles, codes, and standards. Familiarity with structural design and analysis, and materials. General understanding of construction practices. The ability to identify and analyze problems, propose solutions, and make informed decisions; which includes critical thinking skills and the ability to troubleshoot and resolve issues that arise during the design process. The ability to ask questions openly after spending a reasonable amount of time working through the item. Competent verbal and written communication skills for effective collaboration and communication internally within the project team. The ability to convey complex technical information in a clear and concise manner. Strong organizational skills and the ability manage project tasks in a fast-paced environment to meet deadlines. A keen eye for detail to ensure accuracy and quality in given tasks. The ability to work effectively in a team environment and collaborate with diverse stakeholders; which includes active listening, negotiation, and conflict resolution skills. The ability to adapt quickly, make informed decisions, and adjust plans as needed to meet project demands. Willingness to learn relevant software and tools used in structural engineering and project management, such as computer-aided design (CAD) software. A desire to stay updated with industry trends, new technologies, and regulatory changes. Education and Experience Minimum of a Bachelor of Science in Engineering with a Structural focus in process. Desire to obtain, or in possession of, Engineer-In-Training (EIT) certification. Relevant coursework required. Previous internship(s) preferred. Physical Requirements Ability to sit or stand at a desk and work from a computer for prolonged periods of time. Ability to travel to perform site visits at various project locations around the country. Ability to lift a minimum of 15 pounds if needed. DPR Construction is a forward-thinking, self-performing general contractor specializing in technically complex and sustainable projects for the advanced technology, life sciences, healthcare, higher education and commercial markets. Founded in 1990, DPR is a great story of entrepreneurial success as a private, employee-owned company that has grown into a multi-billion-dollar family of companies with offices around the world. Working at DPR, you'll have the chance to try new things, explore unique paths and shape your future. Here, we build opportunity together-by harnessing our talents, enabling curiosity and pursuing our collective ambition to make the best ideas happen. We are proud to be recognized as a great place to work by our talented teammates and leading news organizations like U.S. News and World Report, Forbes, Fast Company and Newsweek. Explore our open opportunities at ********************

Job DescriptionDescription: EHS Technologies Corporation currently has a need for an Intern Technician supporting the design, prototyping, and testing of E33 fuze components at the Naval Surface Warfare Center, Indian Head Division (NSWC-IHD), Maryland. This intern position is estimated to run between May and August 2026. Description: Provide design and development support energetic systems to support Naval Surface Warfare Center, IHD's E33 Fuze Component Technology Division. Work is located at Naval Surface Warfare Center - Indian Head, MD. Situational telework may be authorized. Most of the job will require on-site presence at NSWC-IHD. Specific duties include: provide engineering support, to include design, prototype and testing, of Electronic Safe and Arm Devices and fuzes for weapon systems. The contractor will document the design and test results. A key part of the design process includes test planning, data acquisition, and test reporting. Requirements: Required Qualifications: Experience in fuze component design, prototyping, and testing for fuze component testing. Specific knowledge of the testing of energetic components during live firings for tactical systems is preferred. Engineering knowledge and work with engineering design software, microprocessors, instrumentation, data analysis. Experience with MAVlink a plus. Engineering knowledge of how to write test procedures, test plans, conduct test readiness reviews, and write test reports. Engineering knowledge in how to conduct testing in accordance with approved standard operating procedures (SOPs). Engineering knowledge in the software control and functioning of fuze components. Minimum Education: High school diploma. Current engineering students or recent college graduates with a Bachelor of Science in Electrical, Computer Science, or Mechanical Engineering from an accredited college or university preferred. The candidate must be a US citizen with the ability to obtain and maintain a Security Clearance. The candidate must be willing to submit to random drug testing. EHS Technologies Corporation is an Affirmative Action/Equal Opportunity Employer.

Job Title: Distribution Designer Employment Type: Full-Time Salary Range: $55,000 - $75,000 per year (commensurate with experience) Distribution Designer Join our award-winning, minority- and woman-owned professional engineering firm-KDM Engineering-as a Distribution Designer and bring your technical skills to meaningful utility projects that shape communities. With a focus on electric, gas, site civil, and telecommunications design, KDM is a fast-growing firm recognized for excellence, innovation, and a people-first culture. We are looking for an experienced and motivated Distribution Designer to independently develop construction-ready documents for overhead and underground electric distribution systems and telecommunications infrastructure. This position is ideal for a detail-oriented professional with 4-7 years of utility design experience who thrives in a collaborative, supportive, and flexible work environment. Key Responsibilities: Independently design overhead and underground utility distribution systems, following client and industry standards Prepare construction drawings, cost estimates, material lists (BOMs), and specifications Conduct field visits to gather data, verify site conditions, and obtain landowner permissions as needed Coordinate with clients, project engineers, and permitting authorities Apply utility standards (e.g., NESC) to ensure code compliance Track project progress using client and internal systems Prepare required reports and maintain accurate project documentation Required Skills & Experience: 4-7 years of experience in utility distribution design (electric and/or gas) Must be legally authorized to work in the U.S. Proficiency in design software such as MicroStation, AutoCAD, and GIS systems Experience with Work Management Systems (Asset Suite 8, WMIS, Passport) Familiarity with easement/permitting processes and right-of-way acquisition Knowledge of pole loading and sag analysis tools (e.g., PoleForeman, O-Calc, SpidaCalc) Strong communication skills, both written and verbal Ability to work independently and coordinate with cross-functional teams Valid driver's license and access to a personal vehicle are required for field work Mileage reimbursement is provided for all field-related travel Preferred Qualifications: Engineering background in gas and electrical systems Familiarity with NESC clearance and loading specs Experience preparing plan & profile designs and cost evaluations Why Work at KDM Engineering? Challenging, meaningful projects that directly impact utilities and infrastructure Hybrid work schedule with great flexibility (Fridays are always remote) People-first culture with strong leadership, support, and open communication Competitive salary and comprehensive benefits, including: Medical, dental, and vision insurance 401(k) Paid time off, holidays, and volunteer leave Life and disability insurance Parental leave Professional development assistance Mileage reimbursement for field-related travel About KDM Engineering Established in 2012 on a promise to alter the face of engineering, KDM Engineering has built a reputation of excellence in providing outstanding technical services, maintaining the highest standards of safety and quality assurance, and offering a truly inclusive work environment. Our clients and partners in the public and private sectors consistently recognize KDM for our responsiveness to their needs, budgets, and schedules. Our peers distinguished KDM with Edison Electric Institute's Diverse Supplier Award, Capital One and Women Presidents' Organization's (WPO) 50 Fastest Growing Women-Owned/Led Companies, and Chicago's Best and Brightest Companies to Work For annually for seven years. Our talented, experienced team delivers exceptional engineering designs, project management, and customer support services to each of our projects. Our enduring commitment to diversity, equity, and inclusion is unmatched in our industry. Because our team comes from different backgrounds, cultures, and experiences, we bring uniquely different and diverse perspectives to solving complex engineering problems. Equal Employment Opportunity:? KDM Engineering strongly supports equal employment opportunity for all applicants regardless of race, color, religion, sex, gender identity, pregnancy, national origin, ancestry, citizenship, age, marital status, physical disability, mental disability, medical condition, sexual orientation, genetic information, or any other characteristic protected by state or federal law.? Join us in re-engineering the future, together! kdmengineering.com Salary Description $55,000 - $75,000 per year