Automatic Systems jobs - 3,203 jobs

An automotive technology leader is seeking a Virtual Test Engineer at their Innovation & Engineering Center in Belmont, CA. This role involves end-to-end test engineering for virtual ECUs, requiring over 7 years of relevant experience. The ideal candidate will work within a dynamic team and interface with various technical teams worldwide. Competitive salary between $160,000 and $175,000, plus benefits including performance bonuses, healthcare, and a 401(k) with company match. #J-18808-Ljbffr

Company - Tyson Power Only This fleet's drivers primarily operate in Iowa, Nebraska, Minnesota, Missouri, Wisconsin, Kansas, Indiana, Ohio, Michigan, and Illinois (including Chicago). Potential runs to the East Coast and Florida are possible. Company Drivers enjoy the following: $1,350 Availability Incentive Pay Availability Incentive Pay is subject to restrictions and inclusive of any per diem pay. Must be available for six days of dispatch Annual Increase in Availability Incentive Pay 1 Year Tenure - $1,375 2 Years Tenure - $1,400 3 Years Tenure - $1,450 4 Years Tenure - $1,500 5 Years Tenure - $1,550 Weekly to Biweekly Home Time (Weekly only available in select locations) Monthly Safety & Performance Incentive Bonus Benefit Package Vacation Pay (after 1 year) Pet & Passenger Policy Free SiriusXM & 24' SmartTV Monthly Safety & Performance Incentive Bonus The incremental bonus is $0.05 to $0.15/mile above 3,999 during the four-week bonus period. The operator must qualify for all four weeks of the bonus period with no accidents, claims, CSA points, citations, or service failures. Miles 0 - 3,999 = $0.00 Miles 4,000 - 5,999 = $0.05/mile Miles 6,000 - 7,999 = $0.10/mile Miles 8,000+ = $0.15/mile Example The operator has 4 safe weeks during the bonus period and runs 8,650 dispatched miles during this time. The operator will earn: No extra pay for miles 0 - 3,999 $0.05/mile for miles 4,000 - 5,999 = $99.95 (1,999 miles) $0.10/mile for miles 6,000 - 7,999 = $199.90 (1,999 miles) $0.15/mile for miles over 8,000 = $97.50 (650 miles) Total monthly bonus payout: $397.50 Pay Information Per Diem Reimbursement: $0.15 CPM, for an average of $59 per day of non-taxable income. Included in the rate of pay below. Base Pay: Total listed on the chart below less Per Diem Equipment Newer Model Equipment Large capacity refrigerator 24' SmartTV Free SiriusXM Satellite Radio Heated & cooled seats Automatic high beams Blind spot technology Automatic windshield wipers Lane assist sensors Details Passenger & Pet Policy Direct Deposit E-Logs Pre-Planned Dispatch Trucks Equipped with Best Pass & PrePass Trucks Governed at 70 MPH Hirschbach App Scan paperwork, get payroll information, receive mobile communication messages, and much more from your phone. So Much More Medical, Dental, & Vision Free $10,000 Life Insurance Policy Vacation Pay after 1 year 401K with company match Critical Illness Options Driver Referral Program Driver Influencer Program - Earn money by posting on social media Annual Driver Award Ceremony - The Best of the Best

Our not-so-secret sauce. Award-winning, inclusive, Top Workplace culture doesn't happen overnight. It's a result of hard work by extraordinary people. More than 11,000 of the industry's brightest talent drive our efforts to deliver purposeful work and meaningful impact every day. Learn more about what makes us different and how you can thrive as a Senior Account Manager at McGriff, a division of Marsh McLennan Agency (MMA). MMA provides business insurance, employee health & benefits, retirement, and private client insurance solutions to organizations and individuals seeking limitless possibilities. With 200 offices across North America, we combine the personalized service model of a local consultant with the global resources of the world's leading professional services firm, Marsh McLennan (NYSE: MMC). A day in the life. As our Senior Account Manager on the Energy Commercial Lines team, you'll be primarily responsible for exercising independent decisions relating to client analysis of coverage, recommending coverage needs, and suggesting new lines of coverage for existing clients. Be viewed as a leader and resource by colleagues and peers who provide exceptional client service and serves as a mentor to others. Be knowledgeable of coverages, carrier guidelines, underwriting, legislative changes, and maintain relationships with clients and carrier representatives. Develop strong relationships with carriers and clients. Support Producer and Marketing Account Executives in managing larger and/or more complex accounts. Our future colleague. We'd love to meet you if your professional track record includes these skills: Bachelor's degree or equivalent education and related training 5-7 or more years of relevant insurance industry experience Appropriate insurance license Strong client relation skills to build and maintain positive business relationships with clients and market contacts; including excellent communication skills and service orientation, cooperative nature, and tactfulness to resolve client and company problems Ability to utilize leadership skills by providing direction, constructive feedback, development and training while additionally being able to motivate others to maximize productivity and team morale Demonstrate proficiency in basic computer applications, such as Microsoft Office Suite Ability to travel, occasionally overnight These additional qualifications are a plus, but not required to apply: Advanced degree Certification or designation Experience with Requests for Proposal We know there are excellent candidates who might not check all of these boxes. Don't be shy. If you're close, we'd be very interested in meeting you. Valuable benefits. We value and respect the impact our colleagues make every day both inside and outside our organization. We've built a culture that promotes colleague well-being through robust benefit programs and resources, encourages professional and personal development, and celebrates opportunities to pursue the projects and causes that give colleagues fulfilment outside of work. Some benefits included in this role are: Stock purchase opportunities Generous time off, including personal and volunteering Tuition reimbursement and professional development opportunities Hybrid Work / Remote work Charitable contribution match programs To learn more about McGriff, a division of Marsh McLennan Agency, check us out online: ************************ For careers at McGriff visit: *************************** or flip through our recruiting brochure: ********************** Follow us on social media to meet our colleagues and see what makes us tick: **************************************** ****************************************************** ************************************ ********************************** ***************************** Who you are is who we are. We embrace a culture that celebrates and promotes the many backgrounds, heritages and perspectives of our colleagues and clients. We are always seeking those with ethics, talent, and ambition who are interested in joining our client-focused teams. Marsh McLennan and its affiliates are EOE Minority/Female/Disability/Vet/Sexual Orientation/Gender Identity employers. #MMAMCG

The Röchling Group has been shaping industry. Worldwide. For more than 200 years. We transform the lives of people every day with our customized plastics: they reduce the weight of cars, make medication packaging more secure and improve industrial applications. Our workforce of 11.681 people is located in the places where our customers are - in 83 locations in 25 countries. In the Automotive division, you will shape the mobility of tomorrow. System solutions in the areas of Battery Solutions, Structural Lightweight, Aerodynamics and Propulsion. This means: We protect the environment while also improving the driving experience of millions of vehicles. Are you looking for a new challenge? Is it time to arrive where you want to be? We have grown steadily as a team; would you like to grow too? Do you have what it takes to spur game-changing innovation? Do you crave being part of the solution, while receiving training and learning opportunities? If you answered yes, we have exciting career opportunities for you Get ready to join the Röchling Automotive team and become part of the next chapter in our history At our Akron, OH location we are searching for a: Process Technician - 3rd Shift Where we need you 3rd Shift (11p-7a) $27-$33 w/ $1.00 Shift Differential Scrap Rates for assigned presses Monitor actual cycle times / efficiency Upkeep of Process Parameter sheets (Info to Engineer) Identify Problems (Press / Robot / EOAT) Feedback to Engineer) Logbook Entry / Pass down of shift Issues Keep Machines clean (Purge / Pellets / Parts & Runners in press / etc.) Identify ROOT CAUSE and put into barco at each press stoppage (accurate data) Cleaning of the tools in assigned area (each shift ) Proper Break times and not all together Training of Setup in process and proper startup of the presses / tools Other duties as needed. Each employee is responsible for the quality of his/her personal performance and how said performance impacts the environment, safety, and data security. This is applicable to the departments of development, production, management, logistics, and after market services, as well as to contact with customers and suppliers. Managers and supervisors are also responsible for the quality of his/her team's performance and how said performance impacts the environment, safety, and data security. This principle of comprehensive quality management is developed and furthered through training (on the job), continuing/ extended education, as well as continued supply of information and updates, and should be exemplified by supervisors on every level. Knowledge of customer specific requirements (CSR) necessary through advanced training, or work experience or a combination of the two. How to convince us Prior processing experience and or technical training, 3-5 years' experience required. High School Diploma / GED What we offer Benefits available at DAY ONE Onsite Primary Care Wellness Center for all employees- AT NO COST 401k Match Paid Holidays Onsite Fitness Center membership Apprenticeship/Internship Program Röchling Wellness Program sponsoring run/walk programs throughout the year Employee Discounts at Verizon, BMW, Ford, GM and more Continuous Improvement Program & Safety Awards Employee Referral Program Employee appreciation cookouts and dinners Interested in joining our team? Please send your resume for consideration.

General Description: Perform preventative and predictive maintenance procedures on all tooling. Design, maintain or repair various fixtures and jigs as job requires. Perform welding and fabrication work as necessary. Enter remote work order request into the system when necessary. Shift Log Troubleshoot mechanical, electrical, hydraulic and pneumatic equipment. Read mechanical, electrical, hydraulic and pneumatic schematics Plan and follow thru all Mold Repairs. Maintain mold, secondary equipment, and preventative maintenance schedules. Become familiar with ISO 14001 and TS16949 Knowledge of costing, controlling assets and maintain within budget restraints. Special projects as deem necessary. Assist Tooling Supervisor and Tooling Manger as necessary Each employee is responsible for the quality of his/her personal performance and how said performance impacts the environment, safety, and data security. This is applicable to the departments of development, production, management, logistics, and after market services, as well as to contact with customers and suppliers. Managers and supervisors are also responsible for the quality of his/her team's performance and how said performance impacts the environment, safety, and data security. This principle of comprehensive quality management is developed and furthered through training (on the job), continuing/ extended education, as well as continued supply of information and updates, and should be exemplified by supervisors on every level. Knowledge of customer specific requirements (CSR) necessary through advanced training, or work experience or a combination of the two. Requirements: Able to perform in production environment, learn to operate heavy equipment, operate forklift, work around and operate cranes. Ability to lift up to 50 pounds on a regular basis. Education: High School Diploma or GED

Employment Type: Full Time Salary Range: $20.00 - $45.00 Hourly To be a team member of the Driven by Dobbs family, you must be dedicated to supporting the company's mission, vision, and values. Our Mission To be the leader in the automotive tire and service aftermarket industry in every market where we operate by providing premier service to our guests. Position Title Master Technician Position Overview Driven by Dobbs brings together Dobbs Tire and Auto Centers and Conrad's Tire Express & Total Car Care. Founded in 1976 and 1969 respectively, our family of brands has grown into a rapidly expanding, multi-market automotive service organization. By 2026, we will operate across eight states, with continued growth ahead. Across all locations, we provide a full selection of quality tire brands and comprehensive automotive services, ranging from routine maintenance to advanced diagnostics and engine repair. Our investment in training, development, safety, and team wellbeing empowers our people to deliver exceptional service every day. Rooted in a culture that extends beyond the shop, we proudly support local organizations and charities in the communities where we live and work. We are seeking a Master Technician to serve as a consultant for diagnostic work, vehicle repairs, and service procedures. This role provides technical expertise, leadership, and guidance to the service department, ensuring high-quality work and efficient operations. The ideal candidate demonstrates: Drive and reliability A desire to learn Speed of execution Strong attention to detail All contributing to the exceptional service our customers expect. Roles and Responsibilities Diagnose and repair vehicles accurately, efficiently, and to a high standard. Perform advanced removal, replacement, and diagnostic work on systems including: Emission control systems Throttle body injection Computerized electrical and ignition systems Anti-lock brakes Cruise control Drivability concerns Automatic transmissions A/C systems Four-wheel drive components Train and mentor service department team members. Assist location managers with daily operations, including: Pricing work orders Requisitioning parts Shop organization Supervising service department staff Perform duties of all Technician roles as needed. Support team members during high business demand. Adhere to all safety regulations and procedures at all times. Operate diagnostic and repair equipment, including: Scan tools DSO Smoke machines Other required service tools Maintain personal and company-provided tools. Perform additional tasks as needed to ensure excellent customer service and smooth shop operations. Success Factors Strong belief in safety - being safe 100% of the time is the expectation Alignment with company mission, vision, and values Strong work ethic with a results-driven mindset Team-oriented with the ability to adapt to diverse team members Ability to thrive in a fast-paced, high-volume environment Excellent verbal and written communication skills Strong time management, accountability, and prioritization skills Organized, solution-oriented, and proactive problem solver Self-motivated and goal-oriented Strong critical thinker with high attention to detail Highly customer-centric with strong relationship-building skills Subject matter expert in: Automotive systems Advanced diagnostic and repair techniques Standard automotive diagnostic tools and equipment Ability to guide, train, and support junior technicians and service staff Ability to: Read and interpret safety rules and procedure manuals Write routine reports and correspondence Communicate effectively with customers and team members Ability to perform basic calculations, compute rates, ratios, and percentages, and interpret graphs Work Environment Fast-paced automotive service setting Frequent exposure to varying temperatures Regular contact with automotive chemicals (solvents, lubricants, fluids) Extended periods of standing, bending, and lifting tires or equipment Strict adherence to safety procedures and PPE requirements Team-oriented environment requiring reliability and effective communication Strong attention to detail and commitment to quality service Experience and Education Minimum 5 years of automotive repair experience Certified Master Technician with advanced diagnostic and repair expertise ASE Certifications in one or more of the following: Suspension & Steering Brakes Heating & Air Conditioning Refrigerant Recovery & Recycling Engine Repair Electrical/Electronic Systems Engine Performance Advanced Engine Performance Automatic Transmission/Transaxle Manual Drive Train & Axles Valid driver's license required Benefits Job Stability You Can Count On Continuous Learning and Development Career Growth Opportunities A Culture That Cares The Tools to Succeed Comprehensive Benefits Package: Health & Wellness: Medical, dental, and vision coverage; fully covered preventive care; critical illness and wellness benefits. Financial Security: Life and AD&D insurance, disability coverage, and a 401(k) plan with company match. Work & Family: Employee Assistance Program, paid time off plus six company holidays, employee discounts, and education support. Driven by Dobbs is an equal opportunity employer. All candidates must complete a selection assessment and pre-employment screenings.

A financial services company is seeking a Director of Business Development to enhance their equipment leasing segment. The ideal candidate will have strong skills in CRM, communication, and relationship building. This role requires at least 5 years in equipment leasing, offering a salary range of $30k-$150k with additional commission potential. The company provides comprehensive benefits including medical, retirement plans, and employee support programs. #J-18808-Ljbffr

A leading automotive company in California seeks a Manager for their Simulation Test Engineering team. This role involves leading software engineers in creating the infrastructure for simulation testing, defining roadmaps, and collaborating across teams to meet goals in autonomous systems development. Ideal candidates will have strong leadership skills, a background in operational excellence, and experience with LLMs for production workflows. This position offers fully remote or hybrid work options. #J-18808-Ljbffr

A leading automotive company in Mountain View is seeking an Early Career Machine Learning Engineer to develop cutting-edge AI systems for vehicle design and manufacturing. The role requires collaboration with senior engineers, and candidates must have a relevant PhD or Master's degree. Competitive salary range from $130,000 to $170,000, plus benefits including health programs and possible relocation assistance. #J-18808-Ljbffr

We are seeking an experienced Product Marketing Manager/Product Analyst from a B2B manufacturing background to collaborate closely with our Product Management and Marketing teams. This role combines strategic product analysis with product marketing leadership to drive data-driven product decisions, market positioning, and business growth in the B2B manufacturing sector. Key Responsibilities Market & Competitive Analysis Assess market competition by reviewing and analyzing the nature and scope of present and future product lines, product specifications, and requirements Develop and maintain comprehensive competitive matrices and pricing analysis in collaboration with analysts and pricing teams Appraise new product ideas and evaluate product line extension opportunities based on market research and performance data Conduct sales performance analysis for mature product lines to identify market-driven opportunities for line extensions, accessories, and packaging solutions tailored to diverse distribution channels Product Strategy & Portfolio Management Determine product pricing strategies and complete operational requirements in conjunction with NPD and pricing teams Manage and prioritize product marketing initiatives to ensure development teams focus on the highest-value tasks and opportunities Conduct comprehensive product launch portfolio analysis to determine which initiatives should be scaled, optimized, or discontinued based on performance metrics and market response Maintain deep understanding of product features, market context, and evolving industry trends to inform strategic decisions Cross-functional Collaboration & Launch Management Partner with Marketing to introduce and market new products by developing time-integrated plans coordinating sales, advertising, and production teams Collaborate closely with Product Management to define, plan, and execute comprehensive product launch plans, including timelines, marketing strategies, and sales enablement Coordinate cross-functionally with sales, engineering, and hybrid product teams to understand customer needs, competitive positioning, and value propositions Translate customer feedback and market insights into actionable product improvements, driving continuous enhancements in conjunction with NPD teams Strategic Content & Marketing Support Lead strategic content development aligned with product launches and go-to-market strategies across multiple distribution channels Support trade show coordination by providing strategic direction on messaging, positioning, and competitive advantages that align with overall product launch strategies Identify opportunities to enhance product visibility and performance through strategic marketing initiatives Work with internal stakeholders to ensure marketing materials align with strategic positioning and market analysis Analysis & Reporting Analyze and report on the effectiveness of product launch activities and marketing initiatives, recommending improvements to optimize engagement and conversions Conduct market research to identify keyword and content opportunities that support broader strategic objectives Provide data-driven insights to leadership on product performance, market trends, and competitive landscape Qualifications Required: Bachelor's degree in Marketing, Business, Engineering, or a related discipline 3-5 years of experience in B2B manufacturing product marketing with strong analytical and strategic planning capabilities Proven ability to analyze complex market data and translate insights into strategic product decisions Demonstrated experience managing successful product launches and coordinating cross-departmental collaboration Strong analytical skills with experience in market research, competitive analysis, and pricing strategies Exceptional communication, analytical, and organizational skills Proficiency in analytics tools, market research platforms, and data analysis software Preferred: Experience with trade show planning and event marketing coordination Knowledge of SEO tools and content management systems Strong collaborative skills and ability to effectively lead strategic initiatives within cross-functional teams Experience working closely with NPD and pricing teams

GRAMMER is specialized in developing and manufacturing components and systems for car interiors as well as driver and passenger seats for off-road vehicles, trucks, buses, and trains. As a global partner to the vehicle manufacturing industry, we are represented around the world by our two divisions, Automotive and Commercial Vehicles. Our employees are constantly engaged in developing and producing innovative, flexible solutions to meet challenges in today's competitive global market. GRAMMER can be found on four continents with more than 50 production, distribution and logistics sites in 20 countries. GRAMMER is a leading North American full service automotive supplier of highly engineered thermoplastic components and assemblies for interiors and air and fluid management systems. Culture: Here at GRAMMER, we foster a culture that embraces our Grammer CODE: Collaborate in an inclusive environment, Openness in communication and ideas, Drive for results with energy and Empower yourself and others by taking ownership of decisions and actions. What we are looking for: Grammer is looking for a Maintenance Tech team member to join our location in Delphos, OH. The ideal candidate will enjoy working in a team environment. This individual will have an opportunity to make lasting and positive changes in our team! What you will be doing: This person is responsible for all facets of supporting the Automotive area and expertise in all aspects of industrial maintenance and performs skilled work in the installation, maintenance, and repair of mechanical and electrical equipment. Responsible for supporting the manufacturing area with expertise in all aspects of industrial maintenance and performs skilled work in the installation, maintenance, and repair of mechanical and electrical equipment. Assemble, install, or repair wiring, electrical or electronic components, pipe systems, plumbing, machinery, or equipment. Diagnose mechanical problems and determine how to correct them, read blueprints, repair manuals, or parts catalogs, as necessary. Dismantle devices to access and remove defective parts, using hoists, cranes, hand tools, and power tools. Operate mill, lathe, drill press and other machine shop tools to repair or fabricate machine parts, jigs, fixtures, or tools. Inspect, operate, or test machinery or equipment to diagnose machine malfunctions. Perform routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, and facilities. Inspect drives, motors, and belts, check fluid levels, replace filters, or perform other maintenance actions, following checklists. PLC troubleshooting experience. Hydraulics and pneumatics troubleshooting and repair. Troubleshoot, repair and perform preventive maintenance on mechanical and electrical equipment and machinery using standard and specialized hand/power tools and diagnostic equipment. Install conduit and related hardware to power equipment, repair motor control systems and electrical equipment and replace light fixtures. What you will bring along: High school diploma or equivalent required Minimum 2-4 years of related experience Automotive experience preferred Must have the ability to multi-task in a fast-paced environment Good written and verbal communication skills Detail oriented Excellent time-management skills with great attention to organization Excellent people skills Excellent computer skills in Microsoft Office with some knowledge of HRIS systems Ability to work effectively with all levels of management and large numbers of employees Flexible and adaptable in challenging situations. What we can provide you: Medical, Dental, and Vision coverage eligibility on day 1 Flex Spending Accounts Health Savings Account 401(k) Volunteer Life Insurance options Critical Illness and Accident Insurance Tuition Reimbursement Programs Robust Employee Assistance Program Services Individualized Developmental Opportunities

Description Auria is a leading global supplier of highly-engineered systems for automotive flooring, acoustical, thermal, aerodynamic and other fiber-based solutions for gas and electric vehicles. With U.S.-based operational headquarters in Southfield, Michigan, Auria operates 16 manufacturing, 9 technical and 5 JV locations across 10 countries and employs approximately 3,900 people worldwide.We are currently searching for Cost Estimating & Program Control to join our team in México. This position will be responsible for all aspects of Cost Estimating and Program Controlling from Advanced Quotes through Program Hand-off for floor production. KEY RESPONSIBILITIES Key partner to the Advance Quote team and Program Management team Business partner to Program Management team and plant operations on key performance indicators Work with sales, engineering, purchasing, and operations teams to ensure timely and accurate response to customers' RFQs Accountable for timely and accurate business case support Tracking financial performance from Cradle to Grave to ensure the business have high visibility at any time during its life prior to plant Hand-off Maintain cost cards, APR's, & cost walks on post-award programs. Calculate cost impact of engineering change requests. Analyze and monitor business cases and provide management teams with financial walks for various level of reviews. Be the go-to-person for specific programs Drive appropriate actions to be taken in a timely manner by promoting financial awareness in the business among all functions Strong engineering or manufacturing sense to challenge continuous improvements in productivity and cost/investment optimization Provide business plan (APR) and analysis for all program capital appropriation request (PAR) Direct the preparation of annual budget and long range plans for the in-charge programs Learn all aspects of Facton. This should include maintaining master files, BOM, costing, investments, setting sell prices, developing APR's, and performing overall sensitivity analysis. Collaborate with plants on capacity, efficiency, cycle times and manning. Coordinate cost reviews with plant management and all key team members. Maintain costing database including raw materials, purchased parts, labor/burden rates, CAPX, tooling, etc. MINIMUM QUALIFICATIONS Bachelor's Degree in Engineering or Auto Industry related majors. 3+ years of experience in costing or product engineering or program controlling. 3+ years of experience working in a manufacturing operation. Either Textiles or Automotive. Strong Microsoft Office Skills. Excel, PowerPoint. Power BI would be preferred. Experience with Facton, preferred. Experience with ERP systems. Plex & QAD. Knowledge of master files & part / product structure. Excellent communication skills, both oral and written; strong analytical and quantitative skills; ability to rapidly assimilate knowledge of processes and systems. Strong organizational and time management skills; ability to manage multiple assignments and projects with varying deadlines. Quick learner, proactive, great resilient. Excellent English and high flexibility on working hours What you will gain as a part of the Auria Team: Competitive salary Benefits and perks above the law Professional developments Healthy work environment

Experienced CNC Machinist w/ Okuma OSP Controls Medical / Dental / Eye are available day one. Essential Duties and Responsibilities include the following. Other duties may be assigned: Plan machining by studying work orders, blueprints, engineering plans, materials, specifications and machining parameters. Perform multiple set ups daily Can work independently Trouble shoots Inspect your own work Calculates requirements using basic math Proficient with mics and calipers Ensures the production plan is executed and met Track all work in process within department, ensure all materials are identified and traceable Help employees regarding machine setup, operation, malfunctions, etc. Identify and communicate production issues in a timely manner Accomplish organizational goals by accepting ownership for new and different requests, exploring opportunities to add value to jobs Competencies: To perform the job successfully, an individual should demonstrate the following competencies: Strong attention to detail • Process Improvement • Excellent verbal communication skills • Attendance/Punctuality - Is consistently at work and on time. • Dependability • Safety and Security - Observes safety and security procedures; reports potentially unsafe conditions; uses equipment and materials properly. Education and/or Experience: • Equivalent to high school education or related experience or training; or equivalent combination of education and experience. Reasoning Ability: • Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Physical Demands: • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this Job, the employee is frequently required to stand and walk. The employee is occasionally required to use hands to finger, handle, or feel and reach with hands and arms. The employee must occasionally lift and/or move up to 30 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception and ability to adjust focus. Work Environment: • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Work near moving mechanical parts. • While performing the duties of this Job, the employee is occasionally exposed to moving mechanical parts. The noise level in the work environment is usually moderate to loud. ADDITIONAL NOTES ARCH Cutting Tools is an Equal Opportunity Employee and wholeheartedly supports diversity in the workplace as a basic premise for business success. All employees of ARCH Cutting Tools are employed on an at-will basis. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities.

Company Cox Automotive - USA Job Family Group Business Operations Job Profile Manager, Business Services Management Level Manager - People Leader Flexible Work Option No remote option; must work at a specified Cox location Travel % No Work Shift Day Compensation Compensation includes a base salary of $0.00 - $0.00. The base salary may vary within the anticipated base pay range based on factors such as the ultimate location of the position and the selected candidate's knowledge, skills, and abilities. Position may be eligible for additional compensation that may include an incentive program. Job Description: Responsibilities of Multiple Office Locations: Indianapolis, IN; Hamilton, OH; and Clarksville, IN. Must live in one of the following states: Indiana and Ohio. This position manages and coordinates general office activities, including office administration and staff, is responsible for the accuracy and efficiency of all sales records and documents, and assists customers with sales and service-related problems and questions. Job Responsibilities: * Manage daily administrative operations of the department including establishing work priorities, scheduling workforce, administering attendance policies, resolving problems, etc. * Maintain and oversee sale day process and flow according to company policies. * Develop and implement training methods to ensure all employees have essential job skills. * Maximize office productivity through proficient use of appropriate software applications, and research and develop resources that create a timely and efficient workflow. * Maintain and develop office staff by recruiting, selecting, orienting, training and supervising employees, and by providing educational opportunities. Counsel and discipline employees, as necessary. Plan, monitor and evaluate job performance, and conduct performance appraisals. * Analyze and organize office operations and procedures such as approval of payroll time for office staff, filing systems, requisition of supplies, and other clerical services. * Plan office layout, develop office budget, schedule expenditures, analyze variances and initiate cost reduction. Prepare activity and sales reports for management upon request. * Formulate procedures for systematic retention, protection, retrieval, transfer, and disposal of records. Supervise the servicing of office equipment and the ordering of office supplies. * Maintain and monitor systems to process customer transactions according to established guidelines. Monitor and keep current with Department of Motor Vehicle laws and regulations. * Coordinate activities of various clerical departments and employees and interact with other departments as necessary to ensure high quality of service to customers. * Interact and coordinate with corporate when new procedures are needed, develop, and implement improvements in methods and systems to ensure the smooth flow of work and customer satisfaction. * Interact and coordinate with the corporate to develop and administer proper procedures for floor plan payments. * Ensure that all customer payments are processed on day of receipt for timely deposit. * Work closely with Accounting and MFS Collections departments regarding customer payments and monitoring Working Cash Reports. * Ensure all cash receipts are handled in accordance with IRS 8300 procedures. * Administer and supervise all title processing for operating location transactions. * Assist customers and employees in solving sales related issues. * Actively work with other departments to create strong relationships and increase efficiencies. * Supervise dealer registration office and title office as needed to ensure quality service to customers. * Hire and supervise block clerks. Establish schedules to ensure appropriate coverage for sale day activities and volumes. * Visibly demonstrate safety commitment by following all safety and health procedures and modeling the behaviors related to such. Work in cooperation with safety leadership in support of all safety activities aligned with Safety Excellence. * Review work volumes, plan and continuously monitor staffing levels to ensure efficiency, quality work product, and effective customer service; review departmental performance against key performance indicators and metrics and develop and execute strategies for improvement. * Effectively leads the team at the location by setting an example in behavior, championing Cox/Manheim values and ensuring that all employees are treated with respect. * Enforce all company policies and procedures related to employee and customer conduct. * Partner with various market level support teams (i.e., Finance, HR, MFS, Recon, Safety, Security, Sales) to ensure effective and efficient operational processes that align with company objectives and strategies and high-quality customer service and support. * Perform other duties as assigned. Qualifications: * Equivalent combination of education and work-related experience * High School Diploma and 11 years of relevant experience in related field. ~OR~ Bachelor's Degree and 7 years of relevant experience in a related field and 1 year of experience in a leadership role ~OR~ * Master's Degree and 5 years of relevant experience in related field. ~OR~ * Ph.D and 2 years of relevant experience in related field. * Automotive Title experience. * 3- 5 years of office management or supervisory experience. * Ability to Travel * Client Servicing * Customer Service Focus * Effective communication and interaction skills. * Effective management, customer service, and organizational skills. * Comprehensive knowledge of title & DMV laws and regulations. * Experienced computer and software knowledge essential, including AS400. * Ability to handle multiple tasks at one time. * Ability to sit or stand for prolonged periods of time. Vision abilities required include close, distance, color, and depth perception. * Knowledge of Microsoft Office, including Microsoft Word, Excel, and Outlook software. Preferred: * Certified Notary * Prior Auction experience Work Environment: Fast paced, close quarters. Occasional exposure to fumes, odors, and weather conditions Drug Testing To be employed in this role, you'll need to clear a pre-employment drug test. Cox Automotive does not currently administer a pre-employment drug test for marijuana for this position. However, we are a drug-free workplace, so the possession, use or being under the influence of drugs illegal under federal or state law during work hours, on company property and/or in company vehicles is prohibited. Benefits The Company offers eligible employees the flexibility to take as much vacation with pay as they deem consistent with their duties, the company's needs, and its obligations; seven paid holidays throughout the calendar year; and up to 160 hours of paid wellness annually for their own wellness or that of family members. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, and parental leave. About Us Through groundbreaking technology and a commitment to stellar experiences for drivers and dealers alike, Cox Automotive employees are transforming the way the world buys, owns, sells - or simply uses - cars. Cox Automotive employees get to work on iconic consumer brands like Autotrader and Kelley Blue Book and industry-leading dealer-facing companies like vAuto and Manheim, all while enjoying the people-centered atmosphere that is central to our life at Cox. Benefits of working at Cox may include health care insurance (medical, dental, vision), retirement planning (401(k)), and paid days off (sick leave, parental leave, flexible vacation/wellness days, and/or PTO). For more details on what benefits you may be offered, visit our benefits page. Cox is an Equal Employment Opportunity employer - All qualified applicants/employees will receive consideration for employment without regard to that individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Cox provides reasonable accommodations when requested by a qualified applicant or employee with disability, unless such accommodations would cause an undue hardship. Applicants must currently be authorized to work in the United States for any employer without current or future sponsorship. No OPT, CPT, STEM/OPT or visa sponsorship now or in future.

Battle Motors prides itself on delivering efficient, effective solutions for the heavy-duty work truck industry. With the evolution of our new EV (Electric Vehicle) technology, we are growing faster than ever. At Battle Motors, we believe the most fulfilling place to work is where extraordinary people collaborate to solve difficult problems. The EH&S Manager provides leadership for all aspects of environmental, health & safety, including ownership of training, inspections, recordkeeping and reporting.Essential Duties and Responsibilities Assure both plant and personnel physical security programs are effective. Ensure compliance is maintained with all regulatory requirements, permits, and registrations are in place & current. Anticipate, identify, and evaluate hazardous conditions and practices including hazardous communication. Influence a philosophy of strategic safety training and actively interact with all employees to promote safety and safe acts. Lead Safety Committee and Emergency management response coordination. Partner with internal teams to develop comprehensive and clear EH&S compliant training, auditing and operations as a result of recurring audits. Lead immediate intervention and investigation of all facility incidents to provide tactical response and crisis management as a part of the Accident Investigation Program. Develop and manage training program curriculums to direct company behavior including; lock out/tag out, hazardous waste, emergency response, hazard communication, spill response, Pollution Incident Prevention Plan, hearing conservation, respiratory protection, and related. Demonstrate leadership and responsiveness in deploying practical and cost-effective solutions for continually enhancing the quality of the workplace environment. Oversee operation and maintenance of wastewater treatment system for cab pretreat line, including discharge sampling and filing quarterly reports with the City of New Philadelphia. Establish process control for the cab pretreatment dip line, including chemical analysis by titration to confirm proper bath chemistries. Maintain all required Ohio EPA air emissions records and file quarterly and annual reports. Maintain records required for the facility's spill prevention control & countermeasures plan (SPCC) and keep the plan up to date. Make recommendations and lead projects for reducing the company's environmental footprint, reducing waste, and saving energy. Direct activities of EHS Technician to implement and sustain environmental, health, and safety initiatives to improve culture and performance within the plant. This position will adhere to the Battle Motors Environmental Health and Safety Program by following all safety rules, procedures, practices, training, and safe use of equipment; this includes use of personal protective equipment (PPE) as required. This individual will work in a way that stresses the importance of preventing injury, accidents, or illnesses to themselves or co-workers by correcting or reporting unsafe situations, incidents, or occurrences to their Supervisor immediately. Battle Motors is an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate on the basis of race, color, religion, age, national origin, or any other status protected under federal, state, or local law.

The Die Maker is responsible for studying blueprints and prototypes, machining die components, assembling dies, and ensuring their functionality through precise adjustments and inspections. This role requires a strong understanding of machining techniques, shop mathematics, and the properties of sheet metal under pressure. Key Responsibilities: Study blueprints of products and dies, as well as prototypes and die models. Visualize the structure and function of dies and plan operations, applying knowledge of shop mathematics, machining, and assembly methods. Measure, mark, and scribe tools and stock for machining. Set up and operate machine tools, such as lathes, milling machines, and grinders, to machine parts to specifications. Verify machined parts against specifications for accuracy. Lift machined parts manually or using a hoist and position them on worktables for assembly. Shape, smooth, and fit flat and contoured surfaces of die members and parts using hand tools (e.g., stones, files, and powered grinders). Verify dimensions, clearances, and alignment of die members and parts using tools like dial indicators, gage blocks, thickness gages, and micrometers. Dowels and bolt parts together using hand tools (e.g., hammers and wrenches). Operate power presses, perform final adjustments and refinement operations on dies in press, and inspect piece part products to complete tryouts for Initial Sample Inspection Reports (ISIR). Exercise judgment to manufacture components and dies efficiently and in a timely manner. Perform other customer-driven or product-driven duties as assigned by the Supervisor. Education: High school diploma or equivalent. Experience: 1-2 years of die making or die repair experience. Essential Skills: Proficiency in blueprint reading. Knowledge of tool room equipment. Machining skills, including ID-OD grinding to close tolerances. Familiarity with manufacturing environments. Strong foundation in shop math (geometry, algebra, and trigonometry). Computer drafting skills. Engineering problem-solving abilities. Knowledge of GD&T. Familiarity with ISO 9000 standards. Understanding of materials and mechanical drafting. Experience in tooling design. Physical Requirements: Ability to lift and move medium-weight materials (30-50 pounds). Manual dexterity for precision tool work. Prolonged periods standing or working at machinery.

Company Cox Communications, Inc. Job Family Group Sales Job Profile Client Development Executive - CCI Management Level Individual Contributor Flexible Work Option Hybrid - Ability to work remotely part of the week Travel % Yes, 25% of the time Work Shift Day Compensation Compensation includes a base salary of $52,300.00 - $78,500.00. The salary rate may vary within the anticipated range based on factors such as the ultimate location of the position and the selected candidate's experience. In addition to the salary range identified herein, this role is also eligible for an annual incentive/commission target of $62,800.00. Job Description Sales is about connecting with people - but there's a lot of strategy behind turning a cold call into a successful deal. We're looking for someone with the right skills and track record to help us grow. We're looking for a tech-savvy Client Development Executive to join our team at Cox Business. In this role, you'll help new and existing clients transform the way they do business with our cutting-edge solutions, from internet and networking solutions to next-gen cloud and connected technologies. You'll have a quota tied to a lucrative commission plan, so your earnings are in your hands. Ready to wow us with your sales know-how? Let's talk! You'll be responsible for new account acquisition and development, as well as upselling and cross-selling opportunities with existing clients. Here's how you'll make it happen: * Identifying new prospects in your assigned territory. * Researching prospects' businesses to prepare for sales calls. * Developing and maintaining sales growth plans for each account in your territory. * Communicating with prospective customers to explore mutually beneficial objectives. * Meeting with prospective customers to assess business technology needs. * Collaborating with internal sales support and service delivery teams to meet customers' needs. * Making face-to-face or virtual sales presentations to decision makers. * Negotiating pricing, products and promotions with new customers. Who You Are You're a self-starter with a knack for identifying opportunities and communicating the value of technical products, such as cloud services, to customers. Here's what you have to offer: Minimum: * 8 years of experience in a related field; or a bachelor's degree with 4 years of experience; a master's degree with 2 years of experience; or a Ph.D. in a related discipline. * A valid driver's license, good driving record and reliable transportation. * Excellent written and verbal communication skills. * A track record meeting and exceeding sales goals. * Experience using Windows-based PCs, Microsoft Office and a CRM. Preferred: * Experience in B2B outside sales with quotas. * Experience in field sales, pipeline development, new lead generation and prospecting. * Experience in the telecommunications industry, or with technology or cloud sales. Benefits The Company offers eligible employees the flexibility to take as much vacation with pay as they deem consistent with their duties, the company's needs, and its obligations; seven paid holidays throughout the calendar year; and up to 160 hours of paid wellness annually for their own wellness or that of family members. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, and parental leave. About Us Cox Communications is all about creating moments of real human connection; and for employees, that's true both in the workplace and in the problems we solve for customers. From building advertising solutions to unleashing IoT technologies to creating an exceptional experience for customers in our retail locations and online, we're creating a world that is smarter and more connected. Benefits of working at Cox may include health care insurance (medical, dental, vision), retirement planning (401(k)), and paid days off (sick leave, parental leave, flexible vacation/wellness days, and/or PTO). For more details on what benefits you may be offered, visit our benefits page. Cox is an Equal Employment Opportunity employer - All qualified applicants/employees will receive consideration for employment without regard to that individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Cox provides reasonable accommodations when requested by a qualified applicant or employee with disability, unless such accommodations would cause an undue hardship. Applicants must currently be authorized to work in the United States for any employer without current or future sponsorship.

The Facilities Technician is responsible for maintaining and repairing building systems to ensure a safe, functional, and efficient workplace. This role involves performing routine maintenance, troubleshooting equipment issues and assisting with facility upgrades and repairs. Pay Range: $23.76-27.32 Key Responsibilities: Perform routine inspections and preventative maintenance on HVAC, plumbing, electrical, and mechanical systems. Troubleshoot and repair facility-related issues such as lighting, doors, furniture, and minor plumbing or electrical concerns. Assist in maintaining heating and cooling systems, including filter changes and equipment checks. Conduct general carpentry, painting, and minor renovation tasks as needed. Assist in maintaining fire alarm systems, emergency lighting, and safety equipment. Monitor and report any potential safety hazards within the facility. Support external vendors and contractors during repairs, installations, and inspections. Assist in office moves, furniture assembly, and space reconfigurations. Experience: 4+ years of experience in facility maintenance, building repairs, or a related trade. Knowledge of electrical, plumbing, HVAC, and general building systems. Ability to troubleshoot and perform minor repairs on facility equipment. Ability to work independently and as a team. Physical Requirements: Ability to lift up to 50 lbs. and perform physical tasks such as climbing ladders and working in confined spaces. Comfortable standing, walking, and performing hands-on work for extended periods of time.

We are the movers of the world and the makers of the future. We get up every day, roll up our sleeves and build a better world -- together. At Ford, we're all a part of something bigger than ourselves. Are you ready to change the way the world moves? Ford's Electric Vehicles, Digital and Design (EVDD) team is charged with delivering the company's vision of a fully electric transportation future. EVDD is customer-obsessed, entrepreneurial, and data-driven and is dedicated to delivering industry-leading customer experience for electric vehicle buyers and owners. You'll join an agile team of doers pioneering our EV future by working collaboratively, staying focused on only what matters, and delivering excellence day in and day out. Join us to make positive change by helping build a better world where every person is free to move and pursue their dreams. In this position... We are seeking an experienced and dynamic Embedded Software V&V Manager to lead our ECU Verification and Validation (V&V) team focused on test automation. The ideal candidate will have a strong background in automotive software testing and a proven track record of managing complex testing projects. This role involves overseeing the planning, execution, and reporting of embedded software tests to ensure our products meet the highest quality and safety standards. What you'll do... + Lead, mentor, and manage a team of Component V&V Engineers focused on automated testing of embedded software. + Define, develop, and oversee the execution of comprehensive V&V strategies, test plans, test cases, and test scripts for embedded software components across various domains (e.g., control systems, communication modules, sensor interfaces). + Provide feedback on the design, development, and maintenance of robust automated test frameworks, tools, and infrastructure for embedded software V&V + Ensure thorough validation of functional, non-functional, performance, and regression requirements at the component level, striving for maximum test coverage and efficiency. + Collaborate closely with embedded software development teams, systems engineering, and system V&V teams to ensure seamless integration, traceability of requirements from system to component level, and alignment on V&V goals. + Oversee the analysis of test results, lead root cause identification for reported issues, and track resolutions to ensure the delivery of high-quality, robust software components. + Establish and maintain Component V&V processes, methodologies, and best practices, driving continuous improvement in test efficiency, automation, and overall quality. + Manage project timelines, resources, and budgets for component V&V activities, ensuring timely and effective delivery. + Provide technical guidance and mentorship to the V&V team, fostering a culture of technical excellence, innovation, and continuous learning. + Ensure all V&V activities comply with relevant industry standards, regulatory requirements, and internal quality processes (e.g., functional safety standards, software development lifecycle models). You'll have... + Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, or a related technical field. + 8+ years of experience in embedded software Verification & Validation or Software Quality Assurance, with at least 3 years in a leadership or managerial role. + Proven experience leading and managing technical teams, with a strong ability to motivate, develop, and guide engineers. + Deep understanding of the embedded software development lifecycle and various V&V methodologies (e.g., V-model, Agile). + Proficiency in programming languages commonly used in embedded software V&V (e.g., Python, C/C++). + Familiarity with various communication protocols (e.g., CAN, LIN, Ethernet, SPI, I2C) and diagnostic tools. + Excellent problem-solving, debugging, and analytical skills, with a keen eye for detail. + Strong communication, collaboration, and interpersonal skills, capable of effectively interacting with cross-functional teams and stakeholders. Even better, you may have... + Master's or PhD degree in a relevant engineering field. + Experience with safety-critical embedded systems and relevant industry standards (e.g., ISO 26262 for automotive, IEC 61508 for industrial automation, DO-178C for aerospace). + Experience with continuous integration/continuous delivery (CI/CD) pipelines and DevOps practices for embedded software. + Knowledge of various embedded processor architectures and real-time operating systems (RTOS). + Experience with requirements management, configuration management, and defect tracking tools (e.g., Jira, Azure DevOps, DOORS). You may not check every box, or your experience may look a little different from what we've outlined, but if you think you can bring value to Ford Motor Company, we encourage you to apply! As an established global company, we offer the benefit of choice. You can choose what your Ford future will look like: will your story span the globe, or keep you close to home? Will your career be a deep dive into what you love, or a series of new teams and new skills? Will you be a leader, a changemaker, a technical expert, a culture builder...or all of the above? No matter what you choose, we offer a work life that works for you, including: - Immediate medical, dental, vision and prescription drug coverage - Flexible family care days, paid parental leave, new parent ramp-up programs, subsidized back-up child care and more - Family building benefits including adoption and surrogacy expense reimbursement, fertility treatments, and more - Vehicle discount program for employees and family members and management leases - Tuition assistance - Established and active employee resource groups - Paid time off for individual and team community service - A generous schedule of paid holidays, including the week between Christmas and New Year's Day - Paid time off and the option to purchase additional vacation time. This position is a leadership level 6. For more information on salary and benefits, click here: ***************************** Visa sponsorship is available for this position. Candidates for positions with Ford Motor Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status or protected veteran status. In the United States, if you need a reasonable accommodation for the online application process due to a disability, please call **************. Onsite work of up to three days per week may be required for candidates within commuting distance of a Ford hub location. #LI-Hybrid #LI-HA1 **Requisition ID** : 48170