Automotive technician jobs in Dallas, TX - 1,304 jobs

Job Title: Automotive Technician / Mechanic We are looking for technicians/mechanics who are energetic, upbeat, and have a positive attitude. The technicians we are looking for have to seek out solutions to tough problems with a strong passion for doing what's right for our guest. Responsibilities include, but are not limited to: Technicians use their knowledge & skills to diagnose and fix vehicles for our guest Continuously build experience as an automotive mechanic across a wide range of domestic and foreign vehicles Complete full, accurate, and honest courtesy vehicle inspections Work as part of a team to troubleshoot customer concerns quickly and effectively Follow and promote our high standards of safety, cleanliness, and organization Work closely with the service department and effectively communicate customer concerns Work together with other Technicians to solve problems, meet deadlines, and deliver distinguished results Qualifications Qualifications: Positive attitude and a desire to serve guest 3+ years of experience as an automotive technician/mechanic ASE Certifications preferred, or a plan to achieve Capable of diagnosing and repairing all makes/models of vehicles Meet or exceed hourly goals Aptitude for learning additional skills and processes Professional appearance and strong communication A desire for long-term career development Physical Requirements: Occasionally lift and/or move over 100 pounds Be able to work with tools on vehicles lifted above their head Work in tight spaces as dictated by the vehicle's needed repair Have the needed dexterity in order to efficiently use hand tools Walk/stand for the majority of their workday Drive manual transmissions vehicles Efficiently navigate a computer Additional Information Christian Brothers Automotive (CBA) began in 1982 with the simple premise of providing precision auto repair with transparency, integrity and a philosophy of people first. All 300+ CBA locations offer a modern facility equipped with manufacture-level diagnostic equipment and the latest factory scan tools. CBA shops also offer their technicians a consistent workload, free training, full-time live technician support, and access to our private Technician Assistance Center. Thank you for viewing this opportunity! This job posting is for an opening at a Christian Brothers Automotive location that is independently owned and operated by a local licensed franchisee. Your application and any information included with it will be submitted to the franchisee for further handling. Christian Brothers Automotive Corporation ("CBAC") is a separate business entity. No CBAC employee will be involved in any decisions regarding your employment application. If you are hired for this position, you also understand and acknowledge that the local franchisee will be your employer and that CBAC will not be your employer. The local franchisee is solely responsible for all decisions related to your employment, including hiring, firing, discipline, compensation, scheduling and supervision. All of your information will be kept confidential according to EEO guidelines. Christian Brothers Automotive is an Equal Opportunity Employer. Christian Brothers Automotive locations practice "At-will" employment practices. PandoLogic. Category:Automotive, Keywords:Automotive Technician, Location:Allen, TX-75002

American Meat Companies was founded by Ron and Mariellen Day in a small meat locker in Anaheim, California. From our very modest beginnings in 1975, American Meat Companies has grown to become one of the largest meat purveyors in Southern California and has expanded to a brand new state-of-the-art facility in Dallas, Texas.We produce a full line of steaks, hamburger patties, pork chops, and poultry items, and we make them to your specifications. We know meat. And it's all we do. We are passionate about quality and we are extremely proud of the reputation we have earned over the past 46 years. 2nd Shift Industrial Maintenance Tech Job Summary: Under the supervision of the Facilities & Maintenance Manager, you will be responsible for setting up, installing, repairing, and maintaining production/manufacturing equipment and machinery for a new start-up facility. Inspects equipment for proper functioning and performs preventative maintenance duties per manufacturer's specifications. Diagnosis equipment malfunctions and makes repairs or adjustments as needed. Responsible for assuring all work performed meets Product Safety and Quality, Employee Safety, and Legality of Policies and Procedures. Essential Duties and Responsibilities: 1. Follow specifications of blueprints, manuals, and schematic drawings; install, maintain and repair equipment, machinery, physical structures, and plumbing/electrical systems. 2. Inspect, measure, and test equipment while in operation visually (using electrical and electronic equipment) and auditory (listening for unusual sounds from machines or equipment) to detect malfunction, wear, misalignment, or other problems. Inspect used parts to determine changes in dimensional requirements. 3. Discuss/diagnose machine problems with the Maintenance Supervisor, Production Supervisor, Production Superintendent, Plant Manager, or other maintenance workers. Inform appropriate management personnel of equipment and parts needs. 4. Dismantle defective machines and equipment and install new or repaired parts. Reassemble and test machines. 5. Clean and lubricate shaft, bearings, gears, and other parts of machinery. 6. Install and repair electrical apparatus, such as transformers, wiring, and electrical and electronic components of machinery and equipment. 7. Layout, assemble, install and maintain pipe systems and related hydraulic and pneumatic equipment. Repair and replace gauges, valves, pressure regulators, and related equipment. 8. Install, program, and repair automated machinery and equipment, such as robots or programmable controllers. 9. Set up and operate machine tools, such as lathe, grinder, drill, and milling machine, to repair or fabricate machine parts. Other Duties and Responsibilities: 1. Repair and maintain the physical structure of the establishment and perform preventative maintenance functions. 2. Assist production personnel in change-over and set-up procedures. 3. Attend safety classes/seminars as periodically scheduled. Decision Making & Problem Solving: Responsible for troubleshooting, diagnosing, and repairing production equipment, including but not limited to industrial blenders, industrial mixers, automated packaging equipment, robotic equipment, pumps, valves, and pressure vessels. Good Manufacturing Practices: Interprets GMP and HACCP regulations into Company and product-specific practices. Production Support: Accountable for the efficient installation, maintenance, and repair of Electrical Controls and Mechanical machinery. Equipment includes but is not limited to Hydraulics Combo Dumpers, Meat Blenders, Grinders, Freezers, Scales, Labelers, Case Sealer, Baggers, Seasoning equipment, etc. Project Management: Engages in cross-functional activities and collaborates across boundaries to ensure successful project implementation. Gathers information to interpret needs, assess requirements, and take the initiative to identify sound solutions through the application of expertise and knowledge. Must have a very strong customer service orientation with a high sense of urgency. Quality System Compliance: Ensures the requirements of the Quality System, the Quality System Regulation (USDA, FDA), and other relevant standards are fulfilled. Safety: Enforces Company safety policies and procedures. Responsible for the safe operation and performance of Maintenance and Facility. Technical Documentation/Communication/Processes: Knowledge of preventive maintenance procedures / Total Productive Maintenance. Prior experience in Computerized Maintenance Management Systems. Training & Development: Complete training and documentation thereof, in line with Company policies and procedures. Other Compliance: Works to ensure compliance with all applicable laws and regulations issued by OSHA, EPA, Labor & Employment Law, and other federal, state, and local regulations, including Lock-out/Tag-out, confined spaces, and personal protection regulations. Job Requirements (Education, Work Experience, Certifications, Skills) Education: High school or equivalent (Required), Technical Degree (Preferred), technical training, or equivalent years' experience acceptable in place of formal education. Must be computer literate with proficiency in using CMMS systems. Work Experience: Minimum five (5) years of industrial maintenance experience in manufacturing (Food Preferred); strong in precision maintenance, electro-mechanical troubleshooting, and other industrial skills to include pneumatic and hydraulic system knowledge with; experience with mechanical systems (e.g., gear boxes, chains, sprockets, motors, seals, bearings), product manuals (e.g., reading and applying knowledge to make repairs), troubleshooting mechanical breakdowns (pinpointing and fixing breakdowns), and reading mechanical drawings (e.g., hydraulics, pneumatics); Experience with electrical systems to include low voltage control circuits, motor circuit controls, VFD s, PLC troubleshooting knowledge (Rockwell PLC/HMI knowledge), and electrical safety systems required. Certifications: OSHA 40 (Preferred) Skills: Ability to communicate effectively with a variety of individuals. Ability to work in a fast-paced environment. Ability to reason, negotiate, instruct, persuade, or speak with others. Ability to pay close attention to detail. Strong interpersonal skills and judgment in communicating with staff. Receptive to management development suggestions and willing to seek additional knowledge to facilitate job growth. Excellent written and oral communication skills. Proven ability to juggle multiple tasks simultaneously. Ability to interpret HR regulations, safety rules, operating and maintenance instructions, and procedures manuals. Ability to solve complex problems. Fully competent to a high degree in mechanical knowledge. Ability to troubleshoot electrical controls. Ability to follow verbal and written instructions, as well as interpret pencil sketches and diagrams. Ability to read ladder logic and use it to troubleshoot systems. Other Duties and Responsibilities: May be required to work overtime, evenings, or weekends to complete work. May be required to work flexible shifts, including on-call. Other duties and tasks as assigned. Job Type: Full-time Benefits: 401(k) 401(k) matching Dental insurance Health insurance Life insurance Paid time off Vision insurance Schedule: 2nd Shift Holidays Possible Overtime Weekends as needed Work Location: In person

Benefits: * Medical / Health Benefits with multiple plan options, Flexible Spending Accounts, Dental and Vision * 401k * On the job training / cross-training * Life Insurance, disability insurance * Voluntary life insurance for family members available. * Accident and critical illness insurance optional. * Scheduled performance reviews * Referral program Position Summary: Fabricates and assembles basic tubing components for air, fuel, oil, hydraulic, and related systems of aircraft and spacecraft, according to specifications, using hand tools, power tools, rotary draw tube bending machines (semi-automatic), equipment, measuring instruments, and measuring systems. Performs work under direct supervision or with guidance of more experienced team member. Primary Responsibilities/Essential Functions: 1. Reads work order, blueprints, sketches, and bend data charts, or works from master tubing templates to determine tubing dimensions, configuration, and finish specifications. 2. Establishes basic and moderately complex trim lines of parts and relationship of parts to each other, using master tube data, master template, and measuring systems. 3. Sets up and operates variety of manual and power machines to cut, form, swage, flare, and burr tubing according to specifications. 4. Performs single bend operations using the semi automatic tube bender. 5. Attaches fittings, such as nuts, sleeves, collars, and caps, to tubing components, using hand tools and machines. 6. Aligns, fits, and assembles tubing components in jigs and fixtures for subsequent welding. 7. Measures and inspects tubing components for conformance to customer and Stratoflex requirements using the following devices, height gauge, bevel protractor, calipers, ball gauges, stanchions, fixtures, CMM, Aicon System and visual controls. 8. Tests tubing assemblies for leaks and other defects, using pressure-testing equipment. 9. Marks identifying information on tubing, using electro-chemical etching device, label, or other method. 10. Cleans and lubricates tubing and assemblies. 11. Removes minor imperfections by use of mechanical or manual methods according to approved process instructions Secondary Responsibilities/Non Essential Functions: 1. Actively participates in lean initiatives by identifying and providing suggestions on areas for improvement. Applies lean concepts and tools in work areas. 2. May assist in training less experienced team members. 3. Observes all company policies and procedures, including safety rules and maintains clean, orderly and foreign object damage (FOD) free work area. 4. Ensures all equipment is calibrated in accordance with calibration schedule. 5. Runs bump machine. Note: This job description is not intended to be all-inclusive. Employee may perform other related duties as required to meet the ongoing needs of the organization Qualifications (relevant experience, education and training): 1. Requires High School Diploma or equivalent and one year of related experience including degreasing using solvents and aqueous degreasing methods, preparing tubing for bending and preparing tubing components for stock or transport. Must acquire certified operator stamp within one year in position. 2. Must be able to perform rigid tube processes, waterspider processes, and saw cell processes with limited assistance. 3. Performs basic mathematical calculations, as well as demonstrate effective verbal, written, and basic computer skills. 4. The person in this position frequently communicates with co-workers about work product and processes and must be able to exchange accurate information in these situations. Must be proficient at reading and understanding written instructions, procedures, blueprints, route sheets and test specifications. Demonstrates effective interpersonal communication skills as well as the ability to work in a team environment. 5. Possesses strong mechanical reasoning skills. 6. Able to implement and effectively apply lean/continuous improvement initiatives. 7. Must be able to work within precise limits or standards of accuracy. 8. Able to interpret reports and use standard business software applications. Able to use employee self-service to access on-line information and use specialized automated systems (i.e. PMR, TORS, e-mail). 9. Ability to effectively demonstrate team member competencies and participate in goal setting, performance feedback, and self-development activities. Typical Mental and Physical Demands: While performing the duties of this job, the team member is frequently required to move about inside the plant to operate machinery. The team member occasionally remains in a stationary. The team member is required to operate manual machining equipment, plant machinery and tools to assemble parts and use test equipment. Must be able to detect and identify parts and tools and inspect work for defects and accuracy. Also expected of the team member is regular attendance, the ability to work cooperatively and professionally with others. May be required to move parts or equipment weighing up to 10 pounds distances of up to 30 feet. The team member may be exposed to various solvents and lubricants as well as extremes in temperature or humidity.

Full-time Description The Company Elite Material Handling, an OnPoint Company, is an industry-leading service and equipment solutions provider with branch-based operations across the country. OnPoint Group is a fast-paced and ever-changing company and has been awarded the Best Managed Companies Award by Deloitte and WSJ for three years running, as well as having been named to the Inc. 5000 Fastest Growing Companies list for eight consecutive years! We believe in challenging the status quo and finding a better way for our customers, which is how we have grown into the company we are today. Elite Material Handling is the premier material handling company in Dallas/Fort Worth and Houston. We have solutions for anything and everything you might need for your business. Our experienced and highly trained staff are quick-thinkers and solution-minded professionals, ready to help with any problem, whether it's forklift sales, equipment rental, warehouse equipment and racking, dock & door, service and more. Benefits At Elite Material Handling we believe that Our People are what make us great and help us deliver exceptional customer service! We offer industry leading Benefits to include: Competitive pay - Plus incentive opportunities! Full benefits package that starts day one - Includes medical, dental, vision, 401K with match, company-paid life insurance and disability coverage. Competitive PTO and Paid Holidays Uniform and boot allowance Training and mentoring - Learn from our experts in the industry Advancement opportunities Link to benefits overview: Benefits The benefits listed are subject to change at any time. Please speak with an HR Representative for details. In the case of conflict between the information listed and the official plan documents, the plan documents will always govern. Job Summary The Field Forklift Technician will be responsible for inspecting, servicing, troubleshooting, and repairing various Material Handling Equipment (MHE). Key Job Responsibilities Perform routine preventative maintenance on Material Handling Equipment (MHE). Troubleshoot, diagnose and repair MHE including, but not limited to: Liquid Propane, Gas and Diesel engines, Transmissions, Hydraulic Systems, Steering Systems, Electrical Systems, and Brakes. Read and interpret maintenance manuals, service bulletins, and other specifications. Provide Information and recommend services to the Sales team. Manage work orders (paper and digital) for each job in a timely manner. Perform hazard assessments and maintain a high standard of safe work practices and quality control. Follow company and OSHA safety rules and guidelines. Avoid injuries and damage to property, loss of unused materials and clean-up of work area debris. Completes all necessary company training in a timely manner. Other duties as assigned by supervisor. Key Performance Measurements A score card that reflects performance in areas such as safety, completion time for projects, customer satisfaction, and issue resolution. Management observation regarding attitude, diligence, team contributions, and willingness & ability to learn new skills and information. Other key metrics prescribed by Elite Material Handling leadership, resulting in positive customer and Company impact. Requirements Experience in repair and maintenance of: Electrical, Diesel and Internal Combustion Forklifts; Aerial Lifts; Lift Trucks; and other related material handling equipment. Minimum of 2 years is highly preferred. Ability to thrive in a fast paced, technology driven, service environment. Possess strong teamwork skills. Ability to multi-task. Ability to utilize the available time to organize and complete work within given deadlines. Must be able to communicate effectively, verbal and written, with management and customers. Able to manage time effectively, as well as complete service reports, timecards and parts ordering. Must have schedule flexibility, as services may be performed during evenings, weekends or holidays. Willingness to work overtime. High School Diploma or GED is required. Must be able to pass a standard Department of Transportation (DOT) physical. The selected candidate will be required to pass a criminal history background check. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to wear approved Personal Protective Equipment (PPE), carry tools, use hands to maneuver, handle or feel, and hear and talk. The employee frequently is required to walk and reach with hands and arms. The employee is occasionally required to stand and stoop, kneel, crouch or crawl. The employee must occasionally lift and/or move tools and equipment up to 100 pounds. Specific vision abilities required by this job include close vision and the ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The work is performed in various locations, including warehouses, distribution centers, manufacturing plants, refineries and hospital settings. Employees may work with co-workers' side-by-side with a moderate level of activity being performed. Exposure to high voltage AC/DC power is very common in many work environments. The noise level in the work environment is moderate to high. Elite Material Handling considers applicants for all positions without regard to race, color, religion, creed, gender, national origin, age, disability, genetic information, marital or veteran status, or any other legally protected status. Disclaimer This job posting may also appear on other job boards. Be aware that job postings on external job boards may not be authorized by OnPoint Group and may contain inaccurate or incomplete information. While we encourage you to explore these opportunities, please be aware that we do not endorse or control the content on these external sites. We are not responsible for the accuracy, completeness, or reliability of information posted on other job sites, and we are not liable for any damages or losses that may arise from your use of that information. You are solely responsible for verifying the accuracy and completeness of any information you obtain from external sources. Applicants should refer to OnPoint Group's Careers Page for the most accurate job posting and reach out to the Company with any questions about a job posting. Salary Range The pay range noted represents the company's good faith minimum and maximum range for this role at the time of posting. The actual compensation offered to a candidate will be dependent upon several factors, including but not limited to experience, qualifications, and geographic location. Employees may be eligible for additional incentive pay. #EMH Salary Description $28.00 - $45.00 per hour

Are you ready to accelerate your automotive career? Turn your strong technical knowledge and customer service skills into real growth opportunity at Premium Velocity Auto/ Jiffy Lube (PVA)! We are now seeking Advanced Automotive Technicians-MUST HAVE 5 YEARS of EXPERIECE to work safely in various roles to meet the individual needs of the customer, ensuring that they are confident in the safety of their vehicle. Benefits: Opportunity to increase your payrate within your first 60 days of employment! Paid training plus bonus incentives for completing training. Cross-training across multiple roles, increasing your earning potential. Career paths that offer limitless growth opportunities (in Automotive and Management)! Safety focused work environment to always keep you and our customers safe! Unique benefits including legal and financial advising, employee discount on parts and services, and a members-only discount center for major purchases and day-to-day essentials! * Competitive Medical, Vision, Dental, company funded Life Insurance, FSA/DCFSA, and paid time off to help you care for yourself and your family! * *For full time employees PVA is seeking reliable individuals with a growth mentality, committed to customer satisfaction. Qualified candidates can work well in a team setting, have great communication skills, and are efficient in fast-paced environments. This role requires a minimum of 2 years of proven automotive experience, customer service/sales experience are preferred. A valid driver's license is also required. See full below! Job Summary: The Service Specialist/Advanced Specialist for PVA (Jiffy Lube) is a Lube Technician that performs the advanced maintenance services to ensure the safety of our customer's vehicles. The Service Specialist/Advanced Specialist may work in various positions to meet the individual needs of the customer; therefore, they are thoroughly cross trained in-house for all roles. Job Description: Provide impartial recommendations or options that are tailored specifically to guest's needs based on manufacturer recommendations and technicians' findings. Work efficiently to service the customers in a timely fashion, prioritizing safety always. Perform automotive maintenance of the engine, transmission, axles, steering and suspension, brakes, electrical, heating/air conditioning, tires, batteries, and spark plugs. Perform preventative maintenance such as oil and filter change, refill fluid levels, inspecting and replacing lights, and replacing wiper blades. Participate in regular on-site and e-learning training, and maintain compliance with Jiffy Lube safety requirements, OSHA, and state regulations. Participate in marketing events and promotions. Keep customer, inventory, and service records and perform inventory stocking. Perform housekeeping/minor building maintenance. Promote customer loyalty by ensuring completion of quality workmanship, reviewing services completed with guest, confirming guest satisfaction, and encouraging return at recommended intervals. Requirements: Minimum 5 years of automotive service experience. Valid Driver's License. Dedication to following safety policies and procedures. Willingness to undergo on the job training and a growth mindset. Able to stand for an extended period of time. Be able to lift over 50 pounds. Be able to bend, stoop, reach, crawl, and climb stairs. Comfort working in an enclosed and/or semi-outdoor environment. Authorized to work in the US without sponsorship. Qualifications: ASE certification preferred. Retail experience preferred. Excellent customer service and communication skills. A teamwork mentality. Ability to perform the responsibilities of the job. Able to work in a fast-paced environment while multi-tasking. Benefits: Employer/Employee Funded Medical Plans, Prescription Drug Coverage, and Telemedicine* Employer Funded Basic Life & Accidental Death Dismemberment* Bonus structure for JLU Module completions within set timeframes. Employee discount on parts and services Additional benefits available: Dental Plan and/or Vision Plan* Life & Accidental Death Dismemberment and/or Accident* Short-Term and Long-Term Disability* Critical Illness and/or Cancer and/or Hospital Indemnity* Flexible Spending Account (FSA) and/or Dependent Care FSA* Value Added Services: Employee Assistance Program, Will Prep, Travel Assistance * Full-time employees only Equal Opportunity Employer Jiffy Lube - Premium Velocity Auto provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

If your background is in Cybersecurity, Computer Science and Engineering, Digital Forensics, Management Information Systems, or Security Information Systems, learn more about CRA! Charles River Associates is a leading global consulting firm that provides economic, financial, technical, and business management expertise to major law firms, corporations and governments around the world. CRA advises clients on matters pertaining to litigation and regulatory proceedings, and guides corporations through critical business strategy and performance-related issues. Since 1965, clients have engaged CRA for its combination of industry experience and rigorous, fact-based analysis that provide clients with clear, implementable solutions to complex business concerns. Practices seeking to hire candidates with this profile include (hiring locations listed): Forensic Services/Cybersecurity & Digital Forensics (Boston, Chicago, Dallas, New York, Washington DC) Our team supports cyber due diligence, incident response, software/source code analysis, insurance claims, and security transformation. Forensic Services/E-Discovery (Boston, Chicago, New York) Our team assists companies and their counsel in data preservation, collection, analysis, reporting, and delivery from cloud-based and other repositories. Learn more about our work by reviewing our Services and Industries on our website. Position Overview Assist with security and privacy investigations in response to data security matters, which may include ongoing breaches and fraud; Engage in problem solving and forensic analysis of digital information using standard computer forensic and evidence handling techniques and tools; Apply investigative techniques, scientific reasoning, and digital forensic techniques against various systems to answer questions; Identify, research, and organize information to determine what a hacker did to a compromised system, whether data was stolen from a company asset, or what data to assess and provide in a litigation; Defensibly collect digital evidence and complete chain-of-custody documentation; Leverage your programming, model building, and database administration skills (including using Python, T-SQL, VBA, Excel, C#, and/or other programming languages and tools); Communicate with team members, clients, and other professionals to share investigative and analytical findings, and assist with the drafting of written reports to summarize procedures performed and findings; Work closely with business stakeholders and experts to develop new and innovative tools to support the evolving forensic landscape; Stay current with developments in digital forensics, software tools, e-discovery, and incident response. Check out our blog about a typical day at CRA and how you can make an impact ! Desired Qualifications Bachelor's or Master's degree candidates graduating December 2025/Summer 2026 with an academic focus in Cybersecurity, Computer Science and Engineering, Digital Forensics, Management Information Systems, Security Information Systems, or related field; Strong understanding of computer operating systems, software, and hardware; Ability to conduct detailed forensic investigations and analyses of computers, networks, mobile devices, and removable media; Experience with conducting digital forensic analyses using commercial and open-source forensic tools, including file system forensics, memory analysis, and network analysis; Experience with conducting static/dynamic malware analyses in a lab environment and threat hunting in a live environment; Strong understanding of proper evidence handling procedures and chain-of-custody; Experience with drafting technical and investigative reports and communicating technical findings; High-level familiarity with legal concepts related to intellectual property; Experience with utilizing automation tools and scripts to expedite analyses; Understanding of incident handling procedures, including preparation, identification, containment, eradication, and recovery-to-protect enterprise environments Understanding of common attack techniques used by an adversary on a victim network and how to leverage those techniques to stop further adversary activity Individuals with digital forensics/incident response training and/or certifications, including SANS GIAC (GCIA, GCFA, GCFE, GNFA, GCCC, and/or GREM), IACIS (CFCE or CIFR), and/or Guidance Software (EnCE), are preferred but not required; Effective written and oral communication skills; Demonstrated high level of initiative and leadership; Strong teamwork and collaboration capabilities; Excellent time management and task prioritization skills; Clear and demonstrated interest in consulting through coursework, work experience, activities, or attendance at CRA recruiting events. To Apply To be considered for a position in the United States, we require the following: Resume - please include current address, personal email and telephone number; Cover letter - please describe your interest in CRA and how this role matches your goals. Also, please note if you have interest in a particular practice and/or a location preference; Transcript - may be unofficial. Note: you must be graduating from a bachelor's or master's degree program for this role. If you are graduating from an MBA/PhD program or have work experience, please visit our Careers site to see current open roles. If you are interested in applying for one of our international locations, please visit our Careers site to view and apply for available jobs. Please also note that candidate resume review will commence on or after August 31, and continue on a rolling basis until positions are filled. Career Growth and Benefits CRA's robust skills development programs, including a commitment to offering 100 hours of training annually through formal and informal programs, encourage you to thrive as an individual and team member. Beginning with research and analysis skill building, training continues with technical training, presentation skills, internal seminars, and career mentoring and performance coaching from an assigned senior colleague. Additional leadership and collaboration opportunities exist through internal firm development activities. We offer a comprehensive total rewards program including a superior benefits package, wellness programming to support physical, mental, emotional and financial well-being, and in-house immigration support for foreign nationals and international business travelers. Work Location Flexibility CRA creates a work environment that enables our colleagues to benefit from being together in the office to best deliver on our promise of career growth, mentorship and inclusivity. At the same time, we recognize that individuals realize a range of benefits when working from home periodically. We currently expect that individuals spend at least 3 to 4 days a week working in the office (which may include traveling to another CRA office or to client meetings), with specific days determined in coordination with your practice or team. Our Commitment to Equal Employment Opportunity Charles River Associates is an equal opportunity employer (EOE). All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, status as a protected veteran, or any other protected characteristic under applicable law. Salary and other compensation A good-faith estimate of the annual base salary range for this position is $92,500 - $100,000. Starting pay within this range may vary based on factors such as education level, experience, skills, geographic location, market conditions, and other qualifications of the successful candidate. This position may be eligible for additional bonus incentive compensation. CRA offers a comprehensive benefits package, subject to eligibility requirements, which may include: medical, dental, and vision insurance; 401(k) retirement plan with employer match; life and disability insurance; paid time off (vacation, sick leave, holidays); paid parental leave; wellness programs and employee assistance resources; and commuter benefits.

Job Title Ford Master Gasoline Engine Technician Location Terrell, TX Department Service / Fixed Operations Employment Type Full-Time About Us Platinum Ford is a high-volume, family-owned dealership just east of Dallas, recognized for quality repairs and a technician-first culture. We're growing fast and seeking a skilled Ford Master Gasoline Engine Technician who values production, precision, and teamwork. Position Overview You'll perform advanced diagnostics, engine repairs, and maintenance on Ford gasoline vehicles in a modern, climate-controlled facility. We're looking for a Ford Master-Certified Technician with at least 5 years of dealership experience and strong drivability and diagnostic ability. Compensation • $45-$65 per flag hour, based on certification and experience • Production-based incentives and performance bonuses • Paid training and certification reimbursement Responsibilities • Diagnose and repair Ford gasoline engines, electrical, and drivability concerns • Perform all work per Ford Motor Company and dealership standards • Maintain active Ford STARS training certifications • Communicate clearly with service advisors and foreman • Maintain a clean, organized, and safe work area Requirements • Ford Master Certification (Gasoline Engine specialty required) • 5+ years Ford dealership or OEM-certified experience • Valid driver's license and clean record • Strong diagnostic and problem-solving skills • Commitment to high-quality and efficient work Benefits • Competitive pay plan ($45-$65 per flag hour) • Full benefits package (health, dental, vision, 401k) • Paid time off and holidays • Consistent car count and strong parts support • Modern facility with new equipment • Supportive management and career advancement opportunities How to Apply Apply directly through this Paycor posting or email your resume to *******************************

We are seeking a Senior Master Technician who is Ford-certified to join our team! This individual will be responsible for performing a variety of mechanical services on vehicles, diagnosing and repairing complex mechanical issues, and providing exceptional customer service to our clients. The ideal candidate will have a strong background in the automotive industry and a passion for delivering top-quality workmanship. By working at a Ford dealership, you can be a part of a brand that honors the past, and is invested in the future. Join the Ford Family where we value service to each other and the world as much as to our customers! Benefits: Health, Medical and Dental 401K Plan Paid time off and vacation Growth opportunities Employee vehicle purchase plans Family owned and operated Long term job security Flexible Work Schedule Responsibilities: Perform a wide range of mechanical services on various vehicles in a timely and efficient manner. Diagnose and repair complex mechanical issues using diagnostic tools and equipment. Provide accurate and detailed reports of repairs and services performed. Ensure all work is completed to the highest standards and follows manufacturer specifications. Continually maintain and update technical knowledge and skills through training and certifications. Communicate effectively with customers to explain repairs and services and address any concerns or questions. Collaborate with the service team to maintain a clean and organized work area. Adhere to all safety protocols and regulations. Requirements: High school diploma or equivalent. Ford Certification ASE Certification Previous experience at a Ford dealership Minimum of 5 years of experience as an Automotive Technician, with a Master Technician certification preferred. Thorough knowledge of automotive systems, mechanics, and components. Strong diagnostic and problem-solving skills. Proficient with diagnostic tools and equipment. Excellent communication and customer service skills. Ability to work efficiently and independently in a fast-paced environment. Valid driver's license and clean driving record. Ability to lift up to 50 pounds and stand for extended periods of time. We are an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

The Automotive Service Technician is responsible for performing vehicle repair and maintenance work as assigned in accordance with dealer and factory standards. Duties and Responsibilities: · Diagnose cause of any malfunction and perform repair. · Examine the vehicle to determine if additional service work is required. · Notify service advisor if additional work outlined is needed or required. · Road-test vehicles when required. · Attend factory-sponsored training classes. · Keep abreast of factory technical bulletins. Requirements · · ASE or manufacturing training. · High school diploma or the equivalent. · Valid driver's license and a good driving record. · All applicants must be authorized to work in the USA. · All applicants must be able to pass pre-employment testing to include background checks, MVR and a drug test. Benefits When you Join Nissan of Greenville , you'll enjoy the many other benefits we provide: * Annual Longevity Bonus based on your productivity. * 401K with match *Paid factory training *Paid employee health care Job Type: Full-time Salary: $45.00 - $50.00 per hour Experience level: 3 years Schedule: 8 hour shift Ability to commute/relocate: Greenville, TX: Reliably commute or willing to relocate with an employer-provided relocation package (Required) License/Certification: Nissan Certificate (Preferred) Work Location: In person

Dallas, TX | Full-Time | $25-$30/hr + Weekly Bonus | Branded Van + Tools Provided At WindshieldHUB, we don't just fix glass - we set the standard for modern auto glass service. We've helped over 1 million drivers nationwide and are a brand trusted across more than 100 cities, delivering precision, convenience, and professionalism at every stop. What sets us apart? Our cutting-edge, in-house technology - built by our own Technology Department - powers everything from instant customer quotes to seamless technician scheduling, dispatching, and tracking. This system creates a faster, more efficient process for both our customers and employees, allowing you to spend less time on paperwork and more time doing what you do best. We're expanding our elite technician team in Dallas, TX, and we're looking for a Master-Level Auto Glass Technician to lead with confidence, expertise, and pride. If you're the go-to expert for complex installs, recalibrations, and clean work - and you want to be treated like the professional you are - this is your next move. Compensation & Weekly Bonus: $25-$30/hour base pay (depending on experience) Weekly performance bonuses Overtime available Direct Deposit Payment We Set You Up for Success Branded take-home van - fully equipped, wrapped, and insured All tools, uniforms, and installation equipment provided Tablet & mobile app for seamless job tracking and routing No check-in required - you start your day from home Full Benefits Package Additional $200 per week for 20+ completed orders Paid time off, paid holidays, and parental leave Company-paid training and certification support Growth Opportunities We recognize performance - not just seniority. Future paths include: Training & Onboarding Tech City-Level Supervisor Regional Manager National Manager Your Role Perform flawless glass replacements on all types of vehicles Handle ADAS calibrations with care and accuracy Take on complex jobs: side glass, back windows, regulators Maintain vehicle, tools, and documentation to company standards Represent WindshieldHUB with professionalism and pride What You Bring 5+ years of hands-on auto glass experience Experience with ADAS calibration systems (preferred) Valid driver's license + clean MVR Ability to lift 50+ lbs and work outdoors AGRSS or AGSC certification is a plus - or we'll help you get there Tech-savvy with basic app/tablet use Why Technicians Choose WindshieldHUB We equip you fully - no out-of-pocket expenses You're paid fairly and on time You work efficiently, not rushed or overloaded You're respected and given real opportunities to grow Apply Today If you're ready to join a team that values your skill, sets you up for success, and rewards you properly - let's talk. Email your resume to: [******************************** Job Type: Full-time Work Location: On the road

MME - We Are Family - **************************** We are seeking entry level applicants to be trained for a new career in 12V/24V Mobile Electronics Installation and Service. (You must answer all questions in this application, incomplete submissions will be ignored.) If you possess the correct basic skills (working with your hands and small hand tools), a desire to thrive and do well at work, and an exceptional customer service attitude, we want to talk to you! Regional 12V/24V GPS/Telematics/Dash Cam Installation & Service Technicians Are you seeking a career with an innovative and growing company? Do you like placing things in order and solving problems that make a positive impact? Are you reliable? Do you show up on time, every day, with no excuses? Do you take pride in your appearance and prefer to present a professional image, so you stand out from the competition? Are you coach-able and open to two way communication? If so, let us show you a new career so that you can support yourself and your family. Outdoor work in all weather conditions regularly required. The 411 : Role Title: Regional 12V/24V GPS/Telematics/Dash Cam Installation & Service Technicians Employment Type: Full Time, Year Round work Location: Based in the DFW Metroplex -- approximately 30% overnight and out of town travel required after training is completed. Compensation: Pay range is commensurate with experience and skills, both for installation and organization. A 90-day trial period is mandatory, after which full employment is offered to successful candidates. Comments: Strong possibility of advancement as company growth continues, based on job performance and adherence to company policies and processes. Metro Mobile Electronics, LLC., is an equal opportunity employer specializing in 12V/24V Telematics installation and service. All applicants are required to pass a complete background investigation including criminal, driving, and drug testing. Employment Benefits include: Paid Vacation, Paid Holidays, Sick Leave, Incentive Programs, Group Health, Dental, Life, 401K, Vision Insurance Plans, available short and long term disability, accident and critical illness plans, Performance Pay Program, as well as company provided vehicle, iPhone, iPad, and uniforms. Metro Mobile Electronics, LLC. is an EEO employer. While all applicants are thanked for sending in their applications, only those selected for interviews will be contacted. No phone calls please. Please reply with: 1. Resume 2. Salary History 3. Salary Requirements Job Type: Full-time Job Location: Duncanville, TX Required experience: 2 Years Professional Work Experience in Any Field Required license or certification: Valid Driver's License Required education: High school or equivalent Required language: English Industry Trend keywords: electronics technician, electronics, electrician, electrical, auto tech, automotive technician, mechanic, auto repair, GPS, telematics, fleet management, AVL, mobile installer, GSM, SIM, 12 volt, 24 volt, 12/24 VDC, 12/24V, fleet, ELD, Video Telematics, Dash Cams, Dash Cam, Samsara, MDVR, Safety Cameras, Safety Cams, Road Facing, Cab Facing, Driver Logs. Hireology.

Job Description Hiring an experienced Bike Technician. A passion for cycling, knowledge of bicycle mechanics and bicycle parts, and a proactive and problem solving attitude are qualities at the top of our list! In this job you will Assemble and prepare bikes for sale. Perform a variety of service functions on new and used bikes. Provide one of a kind customer service through direct and detailed interaction with customers. You are Dependable People-oriented Adaptable Detail-oriented Proactive Positive Problem solver Repair experience preferred. Riders and enthusiasts preferred. Open to all ages and levels of experience. Duties Duties include but are not limited to: Apply shop standards in the assembly and repair of bikes and skis across the full product line. Evaluate the mechanical condition of the product and estimate the cost of repairs. Provide an educated assessment for a bicycle repair for the customer that includes an estimated completion date. Meet or exceed shop production standards. Complete paperwork accurately and fully (record parts used work performed detail of torque tolerance and standard procedures; complete pricing of job ticket) and process to next status or location. Record and report any deficiencies not addressed by the repair work being done to the customer and or the appropriate leader. Assist customer in the sale or repair process by sharing product and technical knowledge as appropriate. Operate cash register as necessary. Report or record replacement parts inventory and supply shortages to the General Manager. Maintain shop cleanliness including bench and common workspace.Install and adjust speed and gear mechanisms. Assemble new bicycles. Install, repair, and replace equipment or accessories, such as handlebars, stands, lights, and seats. Align wheels. Disassemble axles to repair, adjust, and replace defective parts, using hand tools. Shape replacement parts, using bench grinders. Repair holes in tire tubes, using scrapers and patches. Weld broken or cracked frames together, using oxyacetylene torches and welding rods. Paint bicycle frames, using spray guns or brushes. Install and adjust brakes and brake pads. Help customers select bicycles that fit their body sizes and intended bicycle uses. Sell bicycles and accessories. Install new tires and tubes. Clean and lubricate bicycle parts. Order bicycle parts. Build wheels by cutting and threading new spokes. Install vehicle parts or accessories. Adjust vehicle components according to specifications. Explain technical product or service information to customers. Sell products or services. Install vehicle parts or accessories. Perform basic equipment maintenance. Order materials, supplies, or equipment. Assemble mechanical components or machine parts. Install vehicle parts or accessories. Adjust vehicle components according to specifications. Assemble mechanical components or machine parts. Install vehicle parts or accessories. Align equipment or machinery. Disassemble equipment for maintenance or repair. Grind parts to required dimensions. Repair tires. Operate welding equipment. Paint surfaces or equipment. Other duties as needed/ assigned. Requirements Requirements include but are not limited to: Minimum 2 years experience preferred working as a technician/ mechanic in a bike shop. Previous bike assembly experience or equivalent preferred Interest in working in a team environment committed to providing excellent sales and service experience while increasing sales through service Strong attention to detail Ability to maintain open and positive relations with employees and customers Interest in developing own skills and knowledge Availability to work a flexible schedule based on business needs, including evenings and weekends Ability to periodically lift 40 pounds Nice To Haves Preferred candidates will have knowledge and experience in any or all of the following systems and tools: Adjustable hand wrenches Bench mount stands Wall mount stands Bike cable cutters Box end spanners Cable cutters Cable stretchers Cassette lock ring tools Chain checkers Chain cleaner brushes Chainring nut wrenches Compact scissors Component cleaning brushes Cone wrench sets Crank bolt wrenches Crank pullers Crown race setters Derailleur hanger alignment gauges Desktop computers Floor pumps Folding hex wrench sets Frame taps Handlebar holders Hex tools Inventory management software LightSpeed Cloud Linkage clamps Minipumps Multipurpose hammers Needle nose pliers Offset brake wrenches Open end wrench sets P-handled hex wrenches Pedal Powered Software Bicycle Repair Man Pedal wrenches Personal computers Phillips head screwdrivers Point of sale terminals Portable repair stands Precision spoke wrenches Repair Traq RepairTRAX Screw type chain tools Shop repair stands Side cutter pliers Spoke gauges Sprocket removers Straight blade screwdrivers Threadless nut setters Three-way hex wrenches Tire levers Wall mount stands Web browser software Wheel truing stands Benefits A competitive benefits package including store discount and flexible scheduling is available to all associates.

Toyota of Irving is looking for skilled Service Technicians to join our team. We provide an excellent working environment in a clean and safe shop. Come and see what we have to offer. We are looking for certified technicians to join our team. WE OFFER: Medical, Dental Life and Disability 401K with Company Contribution Paid Vacation Paid Personal Leave Paid Holidays Bonus Programs Vehicle Purchase Programs RESPONSIBILITIES: Perform work specified on the repair order with efficiency and in accordance with dealership policies Test components and systems, using diagnostic tools and special service equipment; test drive vehicles Diagnose, maintain, and repair vehicle automotive systems Communicate directly with the Service Advisor so that customers can be informed if any additional service is needed. Complete online multi-point inspection report Execute repairs under warranty to manufacturer specifications REQUIREMENTS: Must have at least 2 years of experience as an auto technician Knowledge in all aspects of automotive repair and maintenance Fast learner Good written and verbal communication skills Good customer service skills Team player Computer literate Able to operate electronic diagnostic equipment Valid driver's license About the Dealership Toyota of Irving is a family-owned dealership that cares about employees and their families. We have invested heavily in the newest and best tools and equipment and incorporated Texas and Irving style and accents throughout the building. Family members were involved every step of the way from architectural and design elements to decoration and technology. Our dealership proudly stands as an employee, community, and family collaboration. We are still owned and operated by the Schoemaker family-not a corporate conglomerate. As an employee here, you join this family. You aren't just a number, you are part of a community built around our goal of being trusted experts that our customers can rely on. It's a two-way relationship and we welcome and incorporate feedback into everything we do to ensure that we continue to be the best workplace possible.

We are seeking a Senior Master Technician who is Ford-certified to join our team! This individual will be responsible for performing a variety of mechanical services on vehicles, diagnosing and repairing complex mechanical issues, and providing exceptional customer service to our clients. The ideal candidate will have a strong background in the automotive industry and a passion for delivering top-quality workmanship. By working at a Ford dealership, you can be a part of a brand that honors the past, and is invested in the future. Join the Ford Family where we value service to each other and the world as much as to our customers! Benefits: Health, Medical and Dental 401K Plan Paid time off and vacation Growth opportunities Employee vehicle purchase plans Family owned and operated Long term job security Flexible Work Schedule Responsibilities: Perform a wide range of mechanical services on various vehicles in a timely and efficient manner. Diagnose and repair complex mechanical issues using diagnostic tools and equipment. Provide accurate and detailed reports of repairs and services performed. Ensure all work is completed to the highest standards and follows manufacturer specifications. Continually maintain and update technical knowledge and skills through training and certifications. Communicate effectively with customers to explain repairs and services and address any concerns or questions. Collaborate with the service team to maintain a clean and organized work area. Adhere to all safety protocols and regulations. Requirements: High school diploma or equivalent. Ford Certification ASE Certification Previous experience at a Ford dealership Minimum of 5 years of experience as an Automotive Technician, with a Master Technician certification preferred. Thorough knowledge of automotive systems, mechanics, and components. Strong diagnostic and problem-solving skills. Proficient with diagnostic tools and equipment. Excellent communication and customer service skills. Ability to work efficiently and independently in a fast-paced environment. Valid driver's license and clean driving record. Ability to lift up to 50 pounds and stand for extended periods of time. We are an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

Job Title: Automotive Technician / Mechanic We are looking for technicians/mechanics who are energetic, upbeat, and have a positive attitude. The technicians we are looking for have to seek out solutions to tough problems with a strong passion for doing what's right for our guest. Responsibilities include, but are not limited to: Technicians use their knowledge & skills to diagnose and fix vehicles for our guest Continuously build experience as an automotive mechanic across a wide range of domestic and foreign vehicles Complete full, accurate, and honest courtesy vehicle inspections Work as part of a team to troubleshoot customer concerns quickly and effectively Follow and promote our high standards of safety, cleanliness, and organization Work closely with the service department and effectively communicate customer concerns Work together with other Technicians to solve problems, meet deadlines, and deliver distinguished results Qualifications Qualifications: Positive attitude and a desire to serve guest 3+ years of experience as an automotive technician/mechanic ASE Certifications preferred, or a plan to achieve Capable of diagnosing and repairing all makes/models of vehicles Meet or exceed hourly goals Aptitude for learning additional skills and processes Professional appearance and strong communication A desire for long-term career development Physical Requirements: Occasionally lift and/or move over 100 pounds Be able to work with tools on vehicles lifted above their head Work in tight spaces as dictated by the vehicle's needed repair Have the needed dexterity in order to efficiently use hand tools Walk/stand for the majority of their workday Drive manual transmissions vehicles Efficiently navigate a computer Additional Information Christian Brothers Automotive (CBA) began in 1982 with the simple premise of providing precision auto repair with transparency, integrity and a philosophy of people first. All 300+ CBA locations offer a modern facility equipped with manufacture-level diagnostic equipment and the latest factory scan tools. CBA shops also offer their technicians a consistent workload, free training, full-time live technician support, and access to our private Technician Assistance Center. Thank you for viewing this opportunity! This job posting is for an opening at a Christian Brothers Automotive location that is independently owned and operated by a local licensed franchisee. Your application and any information included with it will be submitted to the franchisee for further handling. Christian Brothers Automotive Corporation ("CBAC") is a separate business entity. No CBAC employee will be involved in any decisions regarding your employment application. If you are hired for this position, you also understand and acknowledge that the local franchisee will be your employer and that CBAC will not be your employer. The local franchisee is solely responsible for all decisions related to your employment, including hiring, firing, discipline, compensation, scheduling and supervision. All of your information will be kept confidential according to EEO guidelines. Christian Brothers Automotive is an Equal Opportunity Employer. Christian Brothers Automotive locations practice "At-will" employment practices. PandoLogic. Category:Automotive, Keywords:Automotive Technician, Location:Anna, TX-75409

Job Description Hiring an experienced Bike Technician. A passion for cycling, knowledge of bicycle mechanics and bicycle parts, and a proactive and problem solving attitude are qualities at the top of our list! In this job you will Assemble and prepare bikes for sale. Perform a variety of service functions on new and used bikes. Provide one of a kind customer service through direct and detailed interaction with customers. You are Dependable People-oriented Adaptable Detail-oriented Proactive Positive Problem solver Repair experience preferred. Riders and enthusiasts preferred. Open to all ages and levels of experience. Duties Duties include but are not limited to: Apply shop standards in the assembly and repair of bikes and skis across the full product line. Evaluate the mechanical condition of the product and estimate the cost of repairs. Provide an educated assessment for a bicycle repair for the customer that includes an estimated completion date. Meet or exceed shop production standards. Complete paperwork accurately and fully (record parts used work performed detail of torque tolerance and standard procedures; complete pricing of job ticket) and process to next status or location. Record and report any deficiencies not addressed by the repair work being done to the customer and or the appropriate leader. Assist customer in the sale or repair process by sharing product and technical knowledge as appropriate. Operate cash register as necessary. Report or record replacement parts inventory and supply shortages to the General Manager. Maintain shop cleanliness including bench and common workspace.Install and adjust speed and gear mechanisms. Assemble new bicycles. Install, repair, and replace equipment or accessories, such as handlebars, stands, lights, and seats. Align wheels. Disassemble axles to repair, adjust, and replace defective parts, using hand tools. Shape replacement parts, using bench grinders. Repair holes in tire tubes, using scrapers and patches. Weld broken or cracked frames together, using oxyacetylene torches and welding rods. Paint bicycle frames, using spray guns or brushes. Install and adjust brakes and brake pads. Help customers select bicycles that fit their body sizes and intended bicycle uses. Sell bicycles and accessories. Install new tires and tubes. Clean and lubricate bicycle parts. Order bicycle parts. Build wheels by cutting and threading new spokes. Install vehicle parts or accessories. Adjust vehicle components according to specifications. Explain technical product or service information to customers. Sell products or services. Install vehicle parts or accessories. Perform basic equipment maintenance. Order materials, supplies, or equipment. Assemble mechanical components or machine parts. Install vehicle parts or accessories. Adjust vehicle components according to specifications. Assemble mechanical components or machine parts. Install vehicle parts or accessories. Align equipment or machinery. Disassemble equipment for maintenance or repair. Grind parts to required dimensions. Repair tires. Operate welding equipment. Paint surfaces or equipment. Other duties as needed/ assigned. Requirements Requirements include but are not limited to: Minimum 2 years experience preferred working as a technician/ mechanic in a bike shop. Previous bike assembly experience or equivalent preferred Interest in working in a team environment committed to providing excellent sales and service experience while increasing sales through service Strong attention to detail Ability to maintain open and positive relations with employees and customers Interest in developing own skills and knowledge Availability to work a flexible schedule based on business needs, including evenings and weekends Ability to periodically lift 40 pounds Nice To Haves Preferred candidates will have knowledge and experience in any or all of the following systems and tools: Adjustable hand wrenches Bench mount stands Wall mount stands Bike cable cutters Box end spanners Cable cutters Cable stretchers Cassette lock ring tools Chain checkers Chain cleaner brushes Chainring nut wrenches Compact scissors Component cleaning brushes Cone wrench sets Crank bolt wrenches Crank pullers Crown race setters Derailleur hanger alignment gauges Desktop computers Floor pumps Folding hex wrench sets Frame taps Handlebar holders Hex tools Inventory management software LightSpeed Cloud Linkage clamps Minipumps Multipurpose hammers Needle nose pliers Offset brake wrenches Open end wrench sets P-handled hex wrenches Pedal Powered Software Bicycle Repair Man Pedal wrenches Personal computers Phillips head screwdrivers Point of sale terminals Portable repair stands Precision spoke wrenches Repair Traq RepairTRAX Screw type chain tools Shop repair stands Side cutter pliers Spoke gauges Sprocket removers Straight blade screwdrivers Threadless nut setters Three-way hex wrenches Tire levers Wall mount stands Web browser software Wheel truing stands Benefits A competitive benefits package including store discount and flexible scheduling is available to all associates.

Job DescriptionDescription: The Company Elite Material Handling, an OnPoint Company, is an industry-leading service and equipment solutions provider with branch-based operations across the country. OnPoint Group is a fast-paced and ever-changing company and has been awarded the Best Managed Companies Award by Deloitte and WSJ for three years running, as well as having been named to the Inc. 5000 Fastest Growing Companies list for eight consecutive years! We believe in challenging the status quo and finding a better way for our customers, which is how we have grown into the company we are today. Elite Material Handling is the premier material handling company in Dallas/Fort Worth and Houston. We have solutions for anything and everything you might need for your business. Our experienced and highly trained staff are quick-thinkers and solution-minded professionals, ready to help with any problem, whether it's forklift sales, equipment rental, warehouse equipment and racking, dock & door, service and more. Benefits At Elite Material Handling we believe that Our People are what make us great and help us deliver exceptional customer service! We offer industry leading Benefits to include: Competitive pay - Plus incentive opportunities! Full benefits package that starts day one - Includes medical, dental, vision, 401K with match, company-paid life insurance and disability coverage. Competitive PTO and Paid Holidays Uniform and boot allowance Training and mentoring - Learn from our experts in the industry Advancement opportunities Link to benefits overview: Benefits The benefits listed are subject to change at any time. Please speak with an HR Representative for details. In the case of conflict between the information listed and the official plan documents, the plan documents will always govern. Job Summary The Field Forklift Technician will be responsible for inspecting, servicing, troubleshooting, and repairing various Material Handling Equipment (MHE). Key Job Responsibilities Perform routine preventative maintenance on Material Handling Equipment (MHE). Troubleshoot, diagnose and repair MHE including, but not limited to: Liquid Propane, Gas and Diesel engines, Transmissions, Hydraulic Systems, Steering Systems, Electrical Systems, and Brakes. Read and interpret maintenance manuals, service bulletins, and other specifications. Provide Information and recommend services to the Sales team. Manage work orders (paper and digital) for each job in a timely manner. Perform hazard assessments and maintain a high standard of safe work practices and quality control. Follow company and OSHA safety rules and guidelines. Avoid injuries and damage to property, loss of unused materials and clean-up of work area debris. Completes all necessary company training in a timely manner. Other duties as assigned by supervisor. Key Performance Measurements A score card that reflects performance in areas such as safety, completion time for projects, customer satisfaction, and issue resolution. Management observation regarding attitude, diligence, team contributions, and willingness & ability to learn new skills and information. Other key metrics prescribed by Elite Material Handling leadership, resulting in positive customer and Company impact. Requirements: Experience in repair and maintenance of: Electrical, Diesel and Internal Combustion Forklifts; Aerial Lifts; Lift Trucks; and other related material handling equipment. Minimum of 2 years is highly preferred. Ability to thrive in a fast paced, technology driven, service environment. Possess strong teamwork skills. Ability to multi-task. Ability to utilize the available time to organize and complete work within given deadlines. Must be able to communicate effectively, verbal and written, with management and customers. Able to manage time effectively, as well as complete service reports, timecards and parts ordering. Must have schedule flexibility, as services may be performed during evenings, weekends or holidays. Willingness to work overtime. High School Diploma or GED is required. Must be able to pass a standard Department of Transportation (DOT) physical. The selected candidate will be required to pass a criminal history background check. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to wear approved Personal Protective Equipment (PPE), carry tools, use hands to maneuver, handle or feel, and hear and talk. The employee frequently is required to walk and reach with hands and arms. The employee is occasionally required to stand and stoop, kneel, crouch or crawl. The employee must occasionally lift and/or move tools and equipment up to 100 pounds. Specific vision abilities required by this job include close vision and the ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The work is performed in various locations, including warehouses, distribution centers, manufacturing plants, refineries and hospital settings. Employees may work with co-workers' side-by-side with a moderate level of activity being performed. Exposure to high voltage AC/DC power is very common in many work environments. The noise level in the work environment is moderate to high. Elite Material Handling considers applicants for all positions without regard to race, color, religion, creed, gender, national origin, age, disability, genetic information, marital or veteran status, or any other legally protected status. Disclaimer This job posting may also appear on other job boards. Be aware that job postings on external job boards may not be authorized by OnPoint Group and may contain inaccurate or incomplete information. While we encourage you to explore these opportunities, please be aware that we do not endorse or control the content on these external sites. We are not responsible for the accuracy, completeness, or reliability of information posted on other job sites, and we are not liable for any damages or losses that may arise from your use of that information. You are solely responsible for verifying the accuracy and completeness of any information you obtain from external sources. Applicants should refer to OnPoint Group's Careers Page for the most accurate job posting and reach out to the Company with any questions about a job posting. Salary Range The pay range noted represents the company's good faith minimum and maximum range for this role at the time of posting. The actual compensation offered to a candidate will be dependent upon several factors, including but not limited to experience, qualifications, and geographic location. Employees may be eligible for additional incentive pay. #EMH

MME - We Are Family - **************************** We are seeking entry level applicants to be trained for a new career in 12V/24V Mobile Electronics Installation and Service. (You must answer all questions in this application, incomplete submissions will be ignored.) If you possess the correct basic skills (working with your hands and small hand tools), a desire to thrive and do well at work, and an exceptional customer service attitude, we want to talk to you! Regional 12V/24V GPS/Telematics/Dash Cam Installation & Service Technicians Are you seeking a career with an innovative and growing company? Do you like placing things in order and solving problems that make a positive impact? Are you reliable? Do you show up on time, every day, with no excuses? Do you take pride in your appearance and prefer to present a professional image, so you stand out from the competition? Are you coach-able and open to two way communication? If so, let us show you a new career so that you can support yourself and your family. Outdoor work in all weather conditions regularly required. The 411 : Role Title: Regional 12V/24V GPS/Telematics/Dash Cam Installation & Service Technicians Employment Type: Full Time, Year Round work Location: Based in the DFW Metroplex -- approximately 30% overnight and out of town travel required after training is completed. Compensation: Pay range is commensurate with experience and skills, both for installation and organization. A 90-day trial period is mandatory, after which full employment is offered to successful candidates. Comments: Strong possibility of advancement as company growth continues, based on job performance and adherence to company policies and processes. Metro Mobile Electronics, LLC., is an equal opportunity employer specializing in 12V/24V Telematics installation and service. All applicants are required to pass a complete background investigation including criminal, driving, and drug testing. Employment Benefits include: Paid Vacation, Paid Holidays, Sick Leave, Incentive Programs, Group Health, Dental, Life, 401K, Vision Insurance Plans, available short and long term disability, accident and critical illness plans, Performance Pay program, as well as company provided vehicle, iPhone, iPad, and uniforms. Metro Mobile Electronics, LLC. is an EEO employer. While all applicants are thanked for sending in their applications, only those selected for interviews will be contacted. No phone calls please. Please reply with: 1. Resume 2. Salary History 3. Salary Requirements Job Type: Full-time Job Location: Fort Worth Required experience: 2 Years Professional Work Experience in Any Field Required license or certification: Valid Driver's License Required education: High school or equivalent Required language: English Industry Trend keywords: electronics technician, electronics, electrician, electrical, auto tech, automotive technician, mechanic, auto repair, GPS, telematics, fleet management, AVL, mobile installer, GSM, SIM, 12 volt, 24 volt, 12/24 VDC, 12/24V, fleet, ELD, Video Telematics, Dash Cams, Dash Cam, Samsara, MDVR, Safety Cameras, Safety Cams, Road Facing, Cab Facing, Driver Logs. Hireology.

Job Title: Automotive Technician / Mechanic We are looking for technicians/mechanics who are energetic, upbeat, and have a positive attitude. The technicians we are looking for have to seek out solutions to tough problems with a strong passion for doing what's right for our guest. Responsibilities include, but are not limited to: Technicians use their knowledge & skills to diagnose and fix vehicles for our guest Continuously build experience as an automotive mechanic across a wide range of domestic and foreign vehicles Complete full, accurate, and honest courtesy vehicle inspections Work as part of a team to troubleshoot customer concerns quickly and effectively Follow and promote our high standards of safety, cleanliness, and organization Work closely with the service department and effectively communicate customer concerns Work together with other Technicians to solve problems, meet deadlines, and deliver distinguished results Qualifications Qualifications: Positive attitude and a desire to serve guest 3+ years of experience as an automotive technician/mechanic ASE Certifications preferred, or a plan to achieve Capable of diagnosing and repairing all makes/models of vehicles Meet or exceed hourly goals Aptitude for learning additional skills and processes Professional appearance and strong communication A desire for long-term career development Physical Requirements: Occasionally lift and/or move over 100 pounds Be able to work with tools on vehicles lifted above their head Work in tight spaces as dictated by the vehicle's needed repair Have the needed dexterity in order to efficiently use hand tools Walk/stand for the majority of their workday Drive manual transmissions vehicles Efficiently navigate a computer Additional Information Christian Brothers Automotive (CBA) began in 1982 with the simple premise of providing precision auto repair with transparency, integrity and a philosophy of people first. All 300+ CBA locations offer a modern facility equipped with manufacture-level diagnostic equipment and the latest factory scan tools. CBA shops also offer their technicians a consistent workload, free training, full-time live technician support, and access to our private Technician Assistance Center. Thank you for viewing this opportunity! This job posting is for an opening at a Christian Brothers Automotive location that is independently owned and operated by a local licensed franchisee. Your application and any information included with it will be submitted to the franchisee for further handling. Christian Brothers Automotive Corporation ("CBAC") is a separate business entity. No CBAC employee will be involved in any decisions regarding your employment application. If you are hired for this position, you also understand and acknowledge that the local franchisee will be your employer and that CBAC will not be your employer. The local franchisee is solely responsible for all decisions related to your employment, including hiring, firing, discipline, compensation, scheduling and supervision. All of your information will be kept confidential according to EEO guidelines. Christian Brothers Automotive is an Equal Opportunity Employer. Christian Brothers Automotive locations practice "At-will" employment practices. PandoLogic. Category:Automotive, Keywords:Automotive Technician, Location:Blue Ridge, TX-75424