Avantor jobs in Bridgewater, NJ - 83728 jobs

Senior Scientist - Process Development
Avantor 4.6
Avantor job in Bridgewater, NJ
The Opportunity: Avantor is seeking a highly skilled and motivated Senior Scientist to lead and support process development initiatives and manufacturing operations for excipients and reagents. This role requires deep expertise in chemical engineering principles, mammalian cell culture, and bioreactor-based process development. The successful candidate will play a pivotal role in designing scalable processes, supporting tech transfer, and resolving on-the-floor manufacturing challenges. A Ph.D. in Chemical, Biochemical, or Biomedical Engineering or related field is required. What we're looking for * Ph.D. in Chemical Engineering, Biochemical Engineering, Biomedical Engineering, or related field (required). * Minimum of 5+ years of industry experience in mammalian cell culture-based bioprocess development and GMP manufacturing support. Doctoral or relevant academic experience can be counted as equivalent experience to industry experience. * Strong knowledge of bioreactor operations, including design, scale-up, control strategies, and troubleshooting. * Proficiency in chemical process principles such as mixing, heat transfer, and reaction engineering as applied to biologics production. * Familiarity with single-use or multi-use bioreactor systems, aseptic operations, and automation platforms. * Excellent problem-solving, technical writing, and cross-functional communication skills. Preferred Qualifications: * Experience with continuous bioprocessing, process modeling, or chemical processing * Exposure to downstream processing (filtration, chromatography) and integration with upstream. * Familiarity with ICH, FDA, and EMA guidelines for biologics manufacturing. * Demonstrated experience with QbD, DoE, and statistical tools (e.g., JMP, Minitab). How you will thrive and create an impact Process Development * Design, develop, and optimize mammalian cell culture processes in bench-scale and pilot-scale bioreactors, including fed-batch and perfusion modes. * Apply chemical engineering fundamentals (mass transfer, kinetics, thermodynamics) to scale up unit operations effectively and predictably. * Support media/feed strategy development, metabolic analysis, and process parameter optimization for improved productivity and product quality. * Collaborate with analytical teams to interpret process data, perform root cause analysis, and drive data-based decisions. * Author technical development reports, risk assessments, and regulatory documentation Manufacturing Support * Serve as a technical subject matter expert (SME) during GMP manufacturing campaigns, providing on-the-floor support and troubleshooting. * Participate in deviation investigations, CAPAs, and change controls related to cell culture and bioprocess equipment. * Drive technology transfer of processes from development labs to GMP facilities, ensuring proper documentation, training, and scale-up readiness. * Support validation activities, including process performance qualification (PPQ) and equipment qualification (IQ/OQ/PQ). ENVIRONMENTAL WORKING CONDITIONS & PHYSICAL EFFORT (Under Typical Positions) The work environment is a laboratory/office setting, and the appropriate PPE will be required in designated areas. The Senior Scientist may occasionally travel to other Avantor locations or customer sites. This is a full-time position. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, skills, efforts or working conditions associated with a job. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position. Avantor is proud to be an equal opportunity employer. Why Avantor? Dare to go further in your career. Join our global team of 14,000+ associates whose passion for discovery and determination to overcome challenges relentlessly advances life-changing science. The work we do changes people's lives for the better. It brings new patient treatments and therapies to market, giving a cancer survivor the chance to walk his daughter down the aisle. It enables medical devices that help a little boy hear his mom's voice for the first time. Outcomes such as these create unlimited opportunities for you to contribute your talents, learn new skills and grow your career at Avantor. We are committed to helping you on this journey through our diverse, equitable and inclusive culture which includes learning experiences to support your career growth and success. At Avantor, dare to go further and see how the impact of your contributions set science in motion to create a better world. Apply today! Pay Transparency: The expected pre-tax pay for this position is $112,400.00 - $187,400.00 Actual pay may differ depending on relevant factors such as prior experience and geographic location. EEO Statement: We are an Equal Employment/Affirmative Action employer and VEVRAA Federal Contractor. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state/province, or local law. If you need a reasonable accommodation for any part of the employment process, please contact us by email at ****************************** and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address. For more information about equal employment opportunity protections, please view the Know Your Rights poster. 3rd Party Non-Solicitation Policy: By submitting candidates without having been formally assigned on and contracted for a specific job requisition by Avantor, or by failing to comply with the Avantor recruitment process, you forfeit any fee on the submitted candidates, regardless of your usual terms and conditions. Avantor works with a preferred supplier list and will take the initiative to engage with recruitment agencies based on its needs and will not be accepting any form of solicitation. Avantor offers a comprehensive benefits package including medical, dental, and vision coverage, wellness programs, health savings and flexible spending accounts, a 401(k) plan with company match, and an employee stock purchase program. Employees also receive 11 paid holidays, accrue 18 PTO days annually, are eligible for volunteer time off and 6 weeks of 100% paid parental leave (except in states that offer paid family leave). These benefits may not apply to employees covered by a collective bargaining agreement or those subject to other eligibility rules.
$112.4k-187.4k yearly Auto-Apply 12d ago

Looking for a job?

Let Zippia find it for you.

CDL DRIVER
Us Foods, Inc. 4.5
Woodburn, OR job
BECOME A US FOODS DRIVER! Ready to build a career with a company that's leading the foodservice industry? US Foods is one of the largest food distributors with a culture and history of promoting from within, excellent training programs and a continuous improvement focus. We are looking for Class A Drivers who are flexible and and open to making multi-yard trips to get route started. These Drivers relish the chance to push their potential, grow and reap the rewards of joining the US FOODS family. This would require commute/travel to various assigned yards located in Oregon to get the routes started. [commute/travel times may vary] We help YOU make it! Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $30.31 and $33.68 per hour. As applicable, this role will also receive: overtime compensation. SCHEDULE : 1st Shift Start times may vary based on route assignment Start times range between 1am - 6am Monday - Saturday availability Average work week is 4 or 5 days Route assignments are covering multiple yards located in Oregon Routes may alternate on a weekly basis Schedules may include weekends EXCELLENT BENEFITS: Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. MILEAGE REIMBURSEMENT HOTEL PAID PER ROUTE ASSIGNMENT NEEDS MEAL ALLOWANCE / PER DIEM Main Ingredients of the Job As a US FOODS Delivery Driver, you will be critical to the US FOODS team and one of the important faces of our organization. As a Delivery Driver, you will have an impact on our customers by delivering our meats, produce, frozen goods, groceries, dry goods, equipment, and supplies to their drop-off sites. Your efforts are the foundation that defines US FOODS success based on our pillars of cultural beliefs, work ethic, collaborative spirit, and service. Deliver best-in-class Customer Service. Deliver customers' orders to meet scheduled delivery times and keep productivity. Unload products with a hand truck and place items in the customer storage area. Able to perform repeated, manual heavy lifting of items up to 80 pounds. Make frequent stops during a work shift. Deliver product in inclement weather conditions. Verify delivery of items with customers. Collect money (cash or checks) where needed. US FOODS has a lot to offer: Local routes (some overnights required) Work Schedule is starting in the early morning until finished. US FOODS is the company built on YOU Matter, where your hard work is rewarded. We are committed to compensation, and benefits that respect, and reward our employees for their dedication and hard work. Paid Training AND Paid Overtime Service recognition and employee rewards Excellent Leadership What you bring to the table Must be at least 21 years of age. Must have valid CDL Class A issued by the state of legal residence with necessary endorsements and DOT qualifications. High school diploma or general education degree (GED) preferred. Valid U.S. driver's license issued by the state of legal residence with proper endorsements if required No more than two convictions in the past two-year period for traffic violations, no DUI convictions in the past three years, no driver's license suspensions in the past three years. Minimum of six months of commercial driving experience (any industry) OR three months of driving experience in the food and beverage delivery industry required. Must be able to pass DOT physical. Great delivery truck drivers are crucial to the US Foods team and one of the important faces of our organization. Our truck drivers strive for integrity and reliability while building trusting relationships with customers. JOIN OUR TRANSPORTATION TEAM! Please check out our job preview video: " A Day in the Life " Delivery Truck Driver ***************************************************** *Registering to the FMCSA Clearinghouse is a requirement by the Department of Transportation. All Drivers are required to the Clearinghouse website and register to the new database. The Clearinghouse is a secure online database that provides real-time information about commercial driver's license (CDL) and commercial learner's permit (CLP) holders' drug and alcohol program violations. If you have not registered to the FMCSA database, please note registration is required. Please visit ******************************************** and click GO to login. If you are able to log into login, but are having trouble with the Clearinghouse registration, see “Clearinghouse Help” field on the clearinghouse page. #LI-JU1
$30.3-33.7 hourly 3d ago
HVM, Inside Sales Engineer - Pittsburgh
Vertiv 4.5
Pittsburgh, PA job
Our Inside Sales Engineer is supporting our High Voltage Maintenance business. HVM is an electrical engineering and testing company providing comprehensive testing, maintenance, and engineering services to a variety of industries including utilities, data centers, renewable energy, commercial and industrial industries. This position will report to the Area Sales Manager for covering HVM's Ohio Valley or Northeast territory and will provide sales and technical support for all the selling resources in that area. This role will assist in generating more business by following up on leads, assisting with proposals, performing joint sales calls with the area sales manager and/or local sales engineers, and supporting additional local technical sales and marketing efforts. RESPONSIBILITIES Provide support to our Operations and Outside Sales Engineers Make regular sales calls on existing accounts and establish contact with new accounts. Make effective customer presentations. Provide proposals or service contracts for HVM's services and repair work. Coordinate and schedule work with Service Center Manager and with customers. Promote sales through active participation in trade shows and professional societies. Work with Business Administrator to develop weekly invoicing and monthly status reports. QUALIFICATIONS Ability to read one-line electrical diagram/prints. Excellent communication skills, both written and verbal Excellent customer service, organizational, and analytical skills. Proficient in MS Office. Experience with CRM Management preferred. Valid Driver's License. EDUCATION AND CERTIFICATIONS Bachelors Engineering, Electrical or Mechanical Graduate of Electrical Technical School Military equivalent TRAVEL TIME REQUIRED 25% At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5.0 billion in revenue, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, O, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. #HVM #LI-HR1
$45k-73k yearly est. Auto-Apply 3d ago
General Production, Machine/Chemical Operators
Lincoln Electric 4.6
Euclid, OH job
Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801, Mentor Req ID: 27969 Description Looking for an exciting & rewarding career with a company that is a global leader in its industry? Look no further than Lincoln Electric, a global leader in welding, cutting, and automation that has been a staple in Northeast Ohio for over 126 years! As a Machine-Chemical Operator, you will help deliver world-class products to customers that have trusted the Lincoln Electric brand for decades. By ensuring the production and/or packaging of electrodes or other product components, you will help continue to drive a legacy of proven and trusted products that will help build the world's bridges, skyscrapers, energy pipelines, and more for decades to come. HERE'S A GLIMPSE OF WHAT YOU'LL BE DOING The Core Description - Perform general labor tasks for the production and packaging of products, including placing components or finished products in appropriate bins, mixers, presses or other machinery. Requires the completion of proper labeling and other paperwork related to production and performs quality checks on all assigned work. May perform occasional problem solving or troubleshooting. The Day-to-Day - Work collaboratively with computer-controlled equipment designed for extruding, wire drawing, winding, and packaging materials. Prepare chemical compounds or other components used in the production or assembly process. This may include set-up, operation, monitoring, maintenance, and/or cleaning of equipment. May require mechanical aptitude and spatial ability as well as continuous use of hands including grasping, pushing, and pulling. Following Best Practices - Strictly adheres to quality standards and frequently reads and follows written work instructions and production specifications (e.g., scales, dials or gauges, charts or tables). Understanding, following and enforcing all risk reduction procedures including wearing specified protective clothing and safety equipment where required. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.
$33k-39k yearly est. 2d ago
MuleSoft Developer
Unifirst 4.6
Wilmington, MA job
This is a hybrid role with 50% on-site requirement in Wilmington, MA. We are seeking a skilled MuleSoft Developer to design, develop, and implement enterprise integration solutions using the MuleSoft Anypoint Platform. The ideal candidate will have strong experience in API-led connectivity, system-to-system (STL), and point-to-point (P2P) integrations, with a solid understanding of integration patterns and secure data exchange protocols (SFTP, TLS, OAuth 2.0) and working knowledge of Azure integration services. The role requires proficiency in mUnit testing, API consumption and deployment, and a foundational understanding of integration patterns, secure protocols, and Azure DevOps pipelines. Candidates should also be familiar with AI-assisted development tools such as Cursor AI Editor, Model Context Protocol (MCP), and Agent-to-Agent (A2A) for accelerating development and improving quality. Responsibilities: MuleSoft Development (70%) Design, develop, and deploy MuleSoft APIs, STL flows, and P2P integrations using Anypoint Studio and CloudHub. Translate functional and technical specifications into secure, scalable MuleSoft solutions under the guidance of senior architects. Implement integration patterns such as request-reply, publish/subscribe, and content-based routing. Contribute to Technical Solution Documents (TSDs), including mappings, architecture diagrams, and sequence flows. Implement secure integrations using SFTP, TLS, and OAuth 2.0 protocols. Develop mUnit test suites to achieve high code coverage and support automated regression testing. Optimize API performance using DataWeave transformations and caching strategies. Configure logging, monitoring, and alerting using Splunk and Anypoint Monitoring. Support API lifecycle management through Anypoint API Manager, applying policies as directed. Use AI-driven tools like Cursor AI Editor to accelerate development, testing, and documentation workflows. Consume/publish messages to Azure Service Bus queues/topics or Event Grid topics. Read/write files from Azure Blob Storage for large payload processing. Trigger or consume Azure Functions as part of integration workflows. Connect to Azure SQL and Cosmos DB from MuleSoft flows for data operations. DevOps and Database Support (30%) Support Azure DevOps CI/CD pipelines for MuleSoft deployments, integrating mUnit and artifact repositories. Collaborate with ERP teams (e.g., Oracle ERP) to develop reliable integrations. Work with relational and NoSQL databases (Oracle, SQL Server, DB2), writing optimized SQL queries and supporting performance tuning. Assist in production troubleshooting and root cause analysis. Ensure compliance with enterprise security, audit, and governance standards. The estimated salary for this position ranges from $114,509 to $152,374 yearly. Actual compensation will vary based on factors including but not limited to the candidate's skills, experience, and qualifications. Geographic differentials may also apply depending on the position's location. There is no application deadline for this role; recruitment will remain open until the position is filled. Qualifications Requirements: Bachelor's degree in computer science, Information Systems, or a related field (required).5+ years of enterprise integration development experience, including 2+ years with MuleSoft Anypoint Platform. MuleSoft Certified Developer (Level 1) required; Integration Architect certification is a plus. Experience with API-led architecture, STL, and P2P integrations. Knowledge of integration patterns, SFTP/TLS/OAuth security protocols, and MuleSoft error handling practices. Ability to contribute to TSDs and understand architectural design documents. Proficiency in mUnit testing with a focus on achieving high coverage. Experience with Azure DevOps and Git for CI/CD processes. Strong SQL skills with Oracle, SQL Server, or DB2, including query optimization. Familiarity with Oracle ERP integrations and data models. Experience with Splunk for log analysis and monitoring. Familiarity with API governance and policy application in Anypoint API Manager. Exposure to AI tools like Cursor AI Editor for development and testing. Working knowledge of Azure integration services: APIM, Service Bus, Event Grid, Azure Storage, Functions, Azure SQL, Cosmos DB, Key Vault. Strong analytical and problem-solving skills. Effective communication and documentation abilities. Ability to collaborate in a team and learn from senior developers. Familiarity with Agile/Scrum methodologies. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws
$114.5k-152.4k yearly Auto-Apply 2d ago
Electrical Engineer - Plant Engineering
Lincoln Electric 4.6
Euclid, OH job
Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Pay Range: Min: 63,800 - Mid - 88,800 Bonus Plan:Profit SharingProfit Sharing % Req ID: 27257 What You Will Do As an Electrical Engineer, you will collaborate in a team environment to design and support industrial electrical systems, which includes various types of equipment new and old. Specific responsibilities include: Engineer solutions to improve equipment reliability, safety, ergonomics, and compliance with ISO 14001, ISO 450001, and other EHS initiatives. Provide technical support to Production, Maintenance, and IT departments, reducing downtime and improving system performance. Develop, design, and update PLC, VFD, and HMI programs using various control automation platforms, including Rockwell, Siemens, and Beijer. Update and maintain National Instruments LabVIEW code for testing applications and equipment. Interface with engineering, manufacturing, maintenance, IT, MES, and Production teams to support facility projects. Apply NEC knowledge for planning industrial equipment installations and work with electricians to update documentation. Supply project leaders with capital cost estimates and timelines, and review capital equipment quotations. Lead projects or project steps, solve complex problems, and act as a resource for colleagues with less experience. Manage outside engineering and construction personnel, ensuring all safety, health, environmental, and compliance aspects meet regulations. Integrate equipment into data collection systems and establish network topologies. Support network backup, device patching management, and control system asset inventory. Compile data from connected devices for organizational use and develop standards for control systems hardware and software. Identify and assume additional responsibilities for projects and processes that align with and drive towards Lincoln Electric Company's 2025 Higher Standard Goals. Education and Experience Requirements This position is posted as a range, candidates with varying levels of experience and qualifications are encouraged to apply. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experience. Minimum requirements, Engineer II - Bachelor's degree in electrical engineering with 3+ years of professional relevant engineering experience. Experienced Professional - Has working knowledge and experience in own discipline Continues to build knowledge of the organization, processes and customers Performs a range of mainly straightforward assignments Uses prescribed guidelines or policies to analyze and resolve problems Receives a moderate level of guidance and direction Engineer III - bachelor's degree in electrical engineering with 5+ years of professional relevant engineering experience Senior "Go To" / Career Level Person - Has in-depth knowledge in own discipline and basic knowledge of related disciplines Solves complex problems; takes a new perspective on existing solutions Works independently; receives minimal guidance May lead projects or project steps within a broader project or have accountability for ongoing activities or objectives Acts as a resource for colleagues with less experience May represent the level at which career may stabilize for many years Engineer IV - bachelor's degree in electrical engineering with 8+ years of professional relevant engineering experience. Lead/Specialist - Is recognized as an expert in own area within the organization Has specialized depth and/or breadth of expertise in own discipline or function Interprets internal or external issues and recommends solutions/best practices Solves complex problems; takes a broad perspective to identify solutions May lead functional teams or projects Works independently, with guidance in only the most complex situations Experience Experience with AutoCAD Electrical CAD software. Experience with PLCs, HMIs, VFDs, and test equipment, including Rockwell Automation software, Siemens software, and National Instruments LabVIEW. Knowledge of NFPA 70, 70E, and 79, and other technical codes. Knowledge of basic networking concepts and SQL Database. Skills Demonstrate initiative and accept responsibilities with minimal supervision. Strong ownership and results-driven mindset. Good judgment, self-motivation, and safety consciousness. Excellent organizational skills. Superior written and oral communication abilities. Adaptability to handle diverse assignments and changing priorities. Hands-on work capability and effective collaboration on the shop floor. Critical thinking and exceptional problem-solving skills. Proficiency in supporting and troubleshooting industrial equipment. Flexibility to work off shifts, travel between facilities in Northeast Ohio, and as required. Effective teamwork with employees at all organizational levels. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.
$75k-99k yearly est. 4d ago
Sr. Technical Thermal Sales Engineer, GSA
Vertiv 4.5
Westerville, OH job
The Sr. Technical Thermal Sales Engineer, Global Strategic Accounts (GSA) drives the sales of thermal management equipment by providing technical expertise and guidance. This position focuses on reviewing specifications, analyzing mechanical drawings, and collaborating closely with GSA Account Managers to help meet customer needs and drive business growth. RESPONSIBILITIES Review and respond to RFPs for Vertiv thermal management solutions, including specification analysis, mechanical drawing review, and assistance with initial equipment configurations. Support the development of concept thermal designs and provide technical input on product selection, sizing, and schematic layouts. Participate in virtual or in-person design reviews with customers and internal teams. Collaborate with cross-functional teams such as offering management, engineering, and sales to support product development and customer solutions. Prepare technical documentation and project-specific bid forms as needed. Contribute to account planning and customer engagement strategies by providing technical insights. Serve as the SME for Vertiv during customer visits and industry events as needed. Stay informed on industry trends, technologies, and materials to support continuous improvement and innovation. Provide feedback to product managers to help guide product enhancements and future development. Help to foster a culture of innovation and continuous improvement within the department. Provide training and mentorship to less experienced team members. MINIMUM QUALIFICATIONS Bachelor's degree in engineering, business, or related field of study (or equivalent combination of education and experience). 4-8 years of industry technical experience. Experience in leading/managing high profile projects. Technical knowledge of Vertiv's thermal management product portfolio. Deep market dynamics and industry knowledge. Proven track record of influencing engineering accounts. Experience working with sales offices. Salesmanship and self-confidence to deal with frequent, stressful customer relationship issues. Excellent sales presentation skills. Strong problem-solving skills and ability to translate technical challenges into actionable plans. PHYSICAL & ENVIRONMENTAL DEMANDS No special physical requirements. TIME TRAVEL REQUIRED 30-50% The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5 billion in sales, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers. Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization.
$26k-33k yearly est. Auto-Apply 5d ago
HVM Electrical Technical Sales Specialist - Cleveland
Vertiv 4.5
Cleveland, OH job
Our Outside Sales Engineer is supporting our High Voltage Maintenance business. HVM is an electrical engineering and testing company providing comprehensive testing, maintenance, and engineering services to a variety of industries including utilities, data centers, renewable energy, commercial and industrial industries. This position will report to the Regional Sales Manager covering the Cleveland area and will provide sales and technical support for all the selling resources in that area. The Outside Sales Engineer is responsible for generating new business and maintaining relationships with existing key customers. RESPONSIBILITIES Make regular sales calls on existing accounts and establish relationships with new customers. Make effective customer presentations. Provide proposals or service contracts for HVM's services and repair work. Coordinate and schedule work with Service Center Manager and with customers. Promote sales through active participation in trade shows and professional societies. Work with Business Administrator to develop weekly invoicing and monthly status reports. EDUCATION AND CERTIFICATIONS Bachelor's Degree Engineering, Electrical or Mechanical Graduate of Electrical Technical School Military certification with at least 3 years of directly related work experience will be held as equivalent to the educational requirement. TRAVEL TIME REQUIRED Up to 75% within assigned Cleveland territory Company provided vehicle The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we're on a mission to empower the people that will power the future. From a simple swipe to life-changing medicines, from push notifications to generative AI. We design, manufacture, and service the products and solutions that keep the world connected. With $6.9 billion in revenue, a strong customer base and global reach spanning nearly 70 countries, we are uniquely positioned to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. The anticipated salary range for this role in the Cleveland, OH locality is between $94,800 to $118,450 per year plus Sales Incentive Plan-salary ranges for other geographic localities may vary. Certain roles are eligible for additional rewards, including merit increases, annual bonus and stock. These awards are allocated based on individual performance and are role based. In addition, certain roles also have the opportunity to earn sales incentives based on revenue or utilization, depending on the terms of the plan and the employee's role. The role is eligible to participate in a comprehensive and competitive benefits program, including medical, dental, vision, disability, PTO, holiday pay, and 401k. Additional details about total compensation and benefits will be provided during the hiring process. #LI-HR1 #HVM
$70k-118k yearly est. Auto-Apply 3d ago
Quality Technician
Lincoln Electric 4.6
Euclid, OH job
Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: ($45,968.00 - $68,952.00) Target Bonus: % Req ID: 27333 Purpose This role is responsible for overseeing quality assurance checks on incoming materials, ensuring compliance with specifications, conducting PAPR inspections, and contributing to related projects. It also plays a critical role in executing stock audits and supporting the rejection processes for subsidiary operations Reports to Quality Assurance Manager. Job Description Promote an atmosphere of continuous process and employee improvement. Support or drive Continuous Improvement activities. Enforce quality standards in all facets of the assigned areas. Assist with the evaluation, proper identification, and disposition of all non-conforming items and materials. Follow all significant product, document and process changes which affect quality. Work with departmental supervision in developing and maintaining a trained work force. Define, troubleshoot, and assist in resolution of daily production quality problems. Must have an uncompromising attitude towards Quality. Maintain manufacturing quality performance metrics and/or quality records. Manage Quality aspects of Stop Shipment process, from initiation to closure. Take active role in Stop Ship investigations and Stop Ship rework tracking/coordination. Take active role in analysis of scrap and yield opportunities. Perform work center, finished product and process audits, as required. Create Process Maps. Initiate CAPA Determinations. Report safety near misses and incidents whenever applicable. Basic Requirements Technician IV: Vocational training and 8+ years of experience in a relevant work environment is required; or High School Diploma/GED with 10+ years' experience in a relevant work environment. a. Has advanced and specialized expertise, typically developed through a combination of job-related training and considerable work experience b. Works autonomously within established procedures and practices c. May act as a lead, coordinating and facilitating the work of others Ability to work effectively and cross-functionally on the shop floor on a regular basis. Demonstrated computer skills in MS Office and Windows operating system. Ability to develop and maintain records and to follow projects through to conclusion. Basic understanding and knowledge of manufacturing engineering and quality standards. Ability to use measurement and inspection tools such as Calipers, Micrometers, Pins, Gauges, Protractor, and Scale. Capable of frequent standing and walking and lifting up to 60 lbs Must have excellent attendance, safety and work record Ability to work rotating shifts. Environmental, Health, and Safety Understand the Company's EHS Policy and how it relates to this job. Be aware of OSHA and EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. Work in a safe manner and observe all company EHS and JHA procedures. Follow safe equipment operating procedures and only operate equipment when guards are in place and in good condition. Know that the company EHS procedures are contained in reference books, such as SSW Specifications, Plant Rules and Regulations, and Material Safety Data Sheets. Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS and JHA procedures. Personal Protective Equipment PPE per EHS 560. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.
$46k-69k yearly 5d ago
Machine Repair Electrician
Lincoln Electric 4.6
Euclid, OH job
Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Hourly Full-Time Req ID: 26432 PURPOSE: Electrically troubleshoot, repair and maintain complex production equipment and systems. Primarily 1st shift schedule, could include 2nd, 3rd, split shifts, weekends, holidays, 12 hour shifts, on-call. Daily work activity is directed by the Group Leader and a Machine Repair electrician A. Reports directly to the department Manager. JOB DESCRIPTION (DUTIES AND RESPONSIBILITIES): Performs all task under general supervision. Provides training and assistance to less experienced Electricians. Assumes high level ownership during off-shift work periods related to work prioritization, production needs, and safety requirements. Troubleshoot, inspect, adjust, and repair automated machines, process systems, and robotic systems to ensure they are working properly and safely. Performs preventative maintenance and repairs on equipment and systems (e.g., mechanical, electrical). Evaluates and recommends equipment improvements to improve availability, capability and yield. Performs equipment failure analyses (including preventative and unscheduled maintenance). Assists engineers in operating test equipment to obtain performance data on parts and assemblies under varying operating conditions. Collects, compiles and summarizes test data, and reviews results with engineering to resolve problems such as product or equipment issues, malfunctions and incomplete test data. Diagnoses test equipment malfunctions, and services and repairs equipment as required. Diagnose malfunctions and analyze results using testing devices, then repair and replace broken machine components Troubleshoot, repair, inspect, and maintain combustion systems. Responsible for continuing education to keep up with changing technology. Configure, commission, and test new equipment while making sure all maintenance and installations are well-documented, working properly, and operating safely. Document repairs for regulatory purposes. Perform bench work in repairing and maintaining production equipment and spare part assemblies. Oversee maintenance contract and service work as assigned. Order and maintain spare parts. Assist with keeping neat and orderly records on work performed. Work with Engineering, Production Team Leads, Manager, Group Leaders, and coworkers to accomplish the desired result. Adjust schedule and work hours to accomplish the desired result, ability to be on-call and must be able to work weekends, off shifts, and holidays as required. Perform work assignments efficiently while being consistent with good safety practices. Assist in procedure/equipment upgrades as necessary. Report any maintenance and/or safety issues to supervisor. Review, understand, and follow all Company specifications and procedures, and regulatory rules and requirements that are associated with the performance of this job. Other duties as assigned by the department Manager. May be asked to rotate between Mentor and Euclid facilities based on job training requirements. Assumes additional responsibilities as needed or directed in support of the Company's 2025 Strategy. BASIC REQUIREMENTS: Must have successfully completed an Electrician Apprentice Program, an Associate degree/certificate in Electronics/Electrical Technology, or have equivalent job experience. Must pass the skilled trade assessment test for this position. Must have a basic knowledge of electrical troubleshooting. Some knowledge of combustion and/or hydraulic systems may be required. Must have a basic knowledge and experience in relay logic, industrial controls, electronics, and PLCs. Must have a basic level of knowledge and experience reading electrical schematics, wiring diagrams, ladder logic, and engineering drawings. Must have a basic ability to use a computer to communicate with machine control systems and PLCs. Must have a basic ability to diagnose the root cause of a problem, make repairs, and test for proper operation. Ability to use various measuring devices (multi-meter, oscilloscope, megohmmeter, etc.) Excellent attendance required. Must possess good organizational and communication skills. Team oriented, self-motivated, safety and quality conscious; requiring minimal supervision. Capable of lifting up to 75 pounds on an occasional basis. May be required to operate basic shop equipment (hoist, forklift, scissor lift, etc.) Be mechanically inclined. Must be able to work in confined areas, climb ladders, and work at heights of 30 feet. Must be able to wear a respirator. Must be able to distinguish colors used in color-coding wires and electronic components. Must be willing to continuously improve technical skills and knowledge. Must be able to understand and interpret the specifications and procedures related to this job. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experiences. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.
$40k-55k yearly est. 4d ago
Manufacturing Materials and Planning Manager
MCC 4.3
Tyrone, PA job
Build your Career with an Industry Leader As the global leader of premium labels, MCC helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing experience, MCC is focused on the future by developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. The Planning Manager is responsible for overall site production operations. Creates a work environment which promotes safety, quality, delivery, and cost-effectiveness. Effectively develops teams that can achieve corporate improvement objectives. Accountable for all aspects of plant production performance while ensuring objectives are attained in a cost-effective manner. Drives best practices through the organization and leads process improvement. Why work at MCC: Comp: $85,000-100,000k/yr This is a Dayshift Position Generous benefits package including medical, dental, vision, disability, life insurance and 401(k) Paid Holidays: New Years, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Day after Thanksgiving, Christmas Eve, Christmas Day, plus two floating holidays Responsibilities: Directly, and through delegation, coordinates activities required to assure safety, quality, delivery, and cost meet specified targets. Assures the compliance of behavior-based safety initiatives and continuously improves safety performance. Executes quality control plans for compliance to standards and drives variation reduction within the process. Assesses on-time delivery performance and develops actions to improve and sustain high level of performance. Holds direct responsibility for managing cost by effective management of labor, overtime, and expenditures. Determine staffing requirements weekly and re-deploy resources during the week as needed to address any shifting staffing needs or changes in priorities and scheduling. Reviews and analyzes production reports to determine root causes of variance from budget, and develops and executes corrective actions, using structured root cause analysis, MDI and Policy Deployment methodologies. Using Lean principles, form teams and involve people to improve productivity, decrease lead times, reduce waste and attain customer quality requirements. Reviews and analyzes production reports to determine root causes of variance from budget and develops and executes corrective actions. Recommend and initiate cost reduction programs centered around capital improvements where ROI and pay back criteria are favorable. Promotes, prepares, and participates in kaizen activities. Sustains results. Facilitates the execution of daily Gemba walk by assuring the proper utilization of hour-by-hour, SQDC boards and War Room tools. In conjunction with Human Resource Manager, coordinates appropriate “required to operate” and “required on roles” staffing levels. Directs the efforts of plant supervision to ensure the consistent application of human resource policies, procedures, and plant rules. Assures adherence to safety accountability guidelines. Coaches and mentors team members to assure their ongoing development Stays abreast of new trends and developments in methods, techniques, equipment, tools, materials, and supplies, which might be incorporated into the production process to increase efficiency or better use of resources. Researches and recommends capital equipment purchases. Participates in special projects and performs other duties as assigned. Qualifications: A hands-on leader that is a role model with high integrity, positive influence, and strong business acumen that embraces change, possesses a continuous improvement mindset, and has a passion for exceeding customer and company expectations. Degree in Engineering, Industrial Technology or Business or equivalent 10 years of staff level leadership experience. Minimum of 7 years' experience in Operations and/or Lean Management. Printing industry experience is preferred. Experience in being a change agent in complex transformational activities. Significant experience in implementation of Lean principals as they apply to manufacturing operations. Ability to apply structured problem-solving methodologies to determine root cause of problems and provide effective countermeasures. Excellent communication skills Advanced excel skills Diversity & Inclusion: MCC fosters an inclusive culture that respects and embraces our teammates' diverse backgrounds and experiences, so that everyone can achieve their full potential here. We aspire for our company to truly reflect the diversity of our customers and the markets we serve. We are committed to equal opportunity for everyone, regardless of peoples' gender identity/expression, age, language, sexual orientation, ability, race, socioeconomic status, national origin or other characteristics. #LI-ML1 #appcast For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.
$78k-97k yearly est. 1d ago
Oiler
Lincoln Electric 4.6
Euclid, OH job
Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Req ID: 27996 Scope Responsible for the timely and proper lubrication and maintenance of mechanical, pneumatic, and hydraulic equipment. Primarily 1st shift schedule, could include 2nd, 3rd, split shifts, weekends, holidays, 12 hour shifts. Daily work activity is directed by the Group Leader. Reports directly to the department Foreman. Responsibilities Primary duties to perform this job include: Performs all task under limited supervision. Provides training and assistance to less experienced Oilers. Leads, organizes, maintains, and ensures completion of a lubrication schedule. Assumes ownership of work task and demonstrates initiative to get work completed. Evaluates and recommends equipment lubrication schedule per experience and manufacturers recommendations. Order and maintain oils, greases, and solvents necessary to complete task. Assist with keeping neat and orderly records on work performed. Work with Engineering, Production Team Leads, Foreman, Group Leaders, and fellow tradesmen to accomplish the desired result. Adjust schedule and work hours to accomplish the desired result, may be required to work weekends and holidays as required. Perform work assignments efficiently while being consistent with good safety practices. Report any maintenance and/or safety issues to supervisor. Review, understand, and follow all Company specifications and procedures, and regulatory rules and requirements that are associated with the performance of this job. Other duties as assigned by the department Foreman. Quality Must understand the Company's Quality Policy and how it relates to this job. Must understand the relevance and importance of the quality activities and how they contribute to the achievement of the quality objectives. Environmental, Health & Safety (EHS) Understand the Company's EHS Policy and how it relates to this job. Be aware of OSHA and EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. Work in a safe manner and observe all company EHS Procedures. Follow safe equipment operating procedures and only operate equipment when guards are in place and in good condition. Know that the company EHS Procedures, Company Specifications, Work Instructions, Plant Rules and Regulations, Job Hazard Analysis (JHA), and Safety Data Sheets (SDS) can be accessed by supervision and are located at Security, and are available upon request. Immediately notify the Foreman of any safety hazard, equipment not operating correctly, or if there are any questions regarding EHS procedures. PERSONAL PROTECTIVE EQUIPMENT - Follow the personal protective equipment policy detailed in Plant Rules & Regulations EHS560 & EHS580. Skills, Aptitude and Abilities High School education or equivalent. Must have an advanced knowledge of proper industrial lubrication techniques and applications. Must have a basic knowledge of mechanical systems and the ability to understand hydraulic and pneumatic systems. Must have a basic ability to diagnose the root cause of a problem and adjust lubrication as required. Must have a basic level of knowledge and experience reading mechanical drawings and service manuals. Excellent attendance required. Must possess good organizational and communication skills. Team oriented, self-motivated, safety and quality conscious; requiring minimal supervision. Capable of lifting up to 75 pounds on an occasional basis. May be required to operate basic shop equipment (hoist, forklift, scissor lift, etc.) Must be able to work in confined areas, climb ladders, and work at heights of 50 feet. Must be able to wear a respirator. Must be willing to continuously improve technical knowledge. Must be able to understand and interpret the specifications and procedures related to this job. Training As directed by the department Foreman in conjunction with experienced personnel. The department Foreman shall ensure that the employee receives the following training at the appropriate times per the Maintenance Department Training Matrix. The department Foreman shall determine when an individual has completed the training and is qualified to assume these responsibilities. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.
$41k-50k yearly est. 1d ago
Embedded Software Engineer
Lincoln Electric 4.6
Euclid, OH job
Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Req ID: 27647 Purpose Design, implement, and maintain embedded software components for use in end products. Continually improve development techniques in order to create software more efficiently and reliably. Apply engineering knowledge to provide creative software solutions for real world customer issues and use cases. Job Duties and Responsibilities Develop multithreaded controls with industrial Real Time Operating Systems and Embedded Linux using C and C++ languages. Developing software for communication with industrial automation networks (e.g. CAN, Ethernet/IP), Internet protocols (e.g. HTTP, FTP), and wireless (e.g. Wi-Fi and Bluetooth). Developing software for embedded graphical displays. Interact with key stakeholders including marketing, suppliers, customers, distributors, and sales engineers to drive new product innovation. Maintains records of all work in process and documents interim/final results in the applicable format; these include Project Definitions, Milestone Plans, ES Reports, Technical Reports, Project Tracking Progress Reports and presentations at meetings/seminar. Develop and refine automated test setups, frameworks, and methods for embedded systems, including unit tests, integration tests, and system-level test to support new product development, product evaluations, and competitive benchmarking. Coordinate activities of internal and external technical support personnel as required. Troubleshoot issues in development and production environments, ensuring rapid resolution and minimizing downtime. Reading and interpreting schematics and component data sheets. Assignments are broad in nature, requiring originality and ingenuity. Has appreciable latitude for unreviewed action or decision. Assumes additional responsibilities as needed or directed in support of the Company's 2025 Strategy. Basic Requirements Level II: Four-year Engineering degree is required and, Minimum of three (3) years Engineering experience. Level III: Four-year Engineering degree is required and, Minimum of five (5) years Engineering experience. Strong familiarity with embedded systems architecture, design considerations, and hardware-software interactions. Industry experience writing C for embedded platforms. Strong understanding of testing methodologies and frameworks for embedded systems Effective communication skills, with the ability to convey complex technical concepts to both technical and non-technical stakeholders. Ability to work independently and as part of a team. Excellent organizational skills. Ability to handle a constantly changing set of priorities. Initiative to take ownership of product designs. Possesses and applies a broad knowledge of principles, practices and procedures of field of specialization to the completion of difficult assignments. The selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experience. Competencies Proficiency in C and C++ programming languages Knowledge of Real Time Operating Systems and Embedded Linux. Experience in developing software for industrial automation networks, internal protocols, and wireless communication. Professional experience with TDD, writing unit tests, automated testing, and continuous integration type frameworks. Familiarity with Azure DevOps and Agile development practices. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.
$81k-101k yearly est. 2d ago
Machinist Maintenance
Lincoln Electric 4.6
Euclid, OH job
Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22821 Employment Status: Hourly Full-Time Function: Maintenance Req ID: 27095 Purpose Ability to machine, mill, and grind various types of metals. Primarily 1st shift schedule, could include 2nd, 3rd, split shifts, weekends, holidays, 12 hour shifts. Daily work activity is directed by the Group Leader and a Maintenance Machinist A. Reports directly to the department Manager. Job Responsibilities Performs all tasks under general supervision. Provides training and assistance to less experienced Machinists. Assumes ownership of work task and demonstrates initiative to get work completed. Creates and reworks machinery and equipment components according to requisition documentation, blueprints, or other drawings. Sets up equipment operation feed, speed and temperature. Follows established procedures for operating various conventional and/or CNC (computerized numerical control) manufacturing equipment for tasks such as cutting, punching, forming, drilling, tapping, turning, milling, grinding, and stamping to fabricate, form or shape manufactured parts, tools or parts assemblies from raw materials. Selects and measures raw materials and parts to specifications to prepare for production processing. Performs reworking and machining of new and spare production parts for departments. Repairs maintenance parts as needed. Verifies the accuracy of work by using calipers, micrometers, dial indicators, and various measuring instruments. Order and maintain project related material as required. Assist with keeping neat and orderly records on work performed and repairs made. Work with Engineering, Production Team Leads, Managers, Group Leaders, and fellow tradesmen to accomplish the desired result. Adjust schedule and work hours to accomplish the desired result, must be able to work weekends and holidays as required. Perform work assignments efficiently while being consistent with good safety practices. Report any maintenance and/or safety issues to supervisor. Review, understand, and follow all Company specifications and procedures, and regulatory rules and requirements that are associated with the performance of this job. Other duties as assigned by the department Manager Basic Requirements Must pass the skilled trade assessment test for this position. Must have a basic knowledge and experience reading mechanical drawings. Must have a basic knowledge and experience in proper machining and grinding techniques (Feed rates, sequencing, cutting speeds). Must have a basic knowledge and experience in setting up machine tools to produce precision parts. Must have a basic knowledge and experience in writing and modifying machine programs. Must be able to use math to calculate dimensions and determine speeds and feed rates. Ability to use various measuring devices (calipers, micrometers, dial indicators, etc.) Excellent attendance required. Must possess basic mechanical aptitude. Must possess good organizational and communication skills. Team oriented, self-motivated, safety and quality conscious; requiring minimal supervision. Capable of lifting up to 75 pounds on an occasional basis. May be required to operate basic shop equipment (hoist, forklift, scissor lift, etc.) Must be able to work in confined areas, climb ladders, and work at heights of 50 feet. Must be able to wear a respirator. Must be willing to continuously improve technical skills and knowledge. Must be able to understand and interpret the specifications and procedures related to this job. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experiences Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.
$47k-57k yearly est. 4d ago
Mechanical Design Engineer
Lincoln Electric 4.6
Fort Loramie, OH job
Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Fort Loramie Employment Status: Hourly Full-Time Req ID: 26270 Summary Lincoln Electric Automation has an outstanding opportunity for a Mechanical Design Engineer. The Mechanical Design Engineer plays a key role supporting our team in the design, building, shipping, and service of Lincon Electric Automation products. A Mechanical Designer typically works on one project at a time (typically creating new designs that are very close to reference designs). In addition to competitive pay, Lincoln Electric offers an annual incentive plan, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits! What You Will Do • Understand and gain knowledge needed to work in software systems. i.e. Solidworks • Provide mechanical layouts and details to production • Take initiative to meet challenging project timelines and budgets (hours and material) • Ensure required ISO documentation is completed • Assist in compiling electronic documentation for Service Manuals, updating design package to reflect status configuration of any critical item • Assure that product, as designed, is in conformance with quote and customer purchase order • Work well in a team environment and communication groups may include; Machine builders, Project Management, Engineering Teams, Management, and support functions • Provide small-scale mechanical layouts and detail prints to production • May support other roles as a cross-training opportunity Education & Experience Requirements Mechanical Engineer or Mechanical Engineering Technology degree required Minimum 2 years of experience in manufacturing and design of industrial automated equipment CAD (3D modeling) required Computer proficiency including spreadsheet, word processing and project software Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.
$63k-77k yearly est. 5d ago
Rochelle Foods - Maintenance Mechanic 2nd/3rd Shift 2026
Rochelle Foods 4.0
Rochelle, IL job
Maintenance Mechanics 2nd and 3rd Shifts Starting Hourly Range : $29.55 - $32.36 + 0.75 shift differential. Based on qualifications and/or experience. Applicants must NOT now, or at any time in the future, require employer sponsorship for a work visa. Applicants must be authorized to work in the United States for any employer. MUST be 18 years of age or older. Rochelle Foods LLC has openings for Industrial Maintenance Mechanics. Successful candidates will work in our food processing production facility located in Rochelle, IL and enjoy competitive wages along with a competitive benefits package. Vacancies are typically on 2nd or 3rd shift with opportunities for overtime. Weekend work is required. Specific schedules will be discussed during the interview process. Rochelle Foods, LLC produces a variety of products for foodservice and retail consumers, including Hormel Bacon 1, Hormel Black Label bacon, precooked and microwaveable bacon, Hormel Compleats microwaveable meals and deli hams. Responsibilities: This position requires the ability to maintain, troubleshoot, and repair equipment in an industrial manufacturing environment. Perform proactive and reactive maintenance on all production equipment, buildings, and grounds. Use knowledge and skill to produce equipment and modify existing equipment to meet the needs of the production teams. Perform the necessary work with a minimum of direct supervision to identify and solve problems. Use communication skills to keep Supervisors, Maintenance Engineers and fellow team members informed of their progress. Performs other tasks as assigned by management. Follow food safety procedures in accordance with the food safety policies of Rochelle Foods, LLC. Preferred Qualifications: Qualified candidates will have either previous relevant experience as an Industrial Maintenance Mechanic, or related field, or training at an accredited technical school. · Strong problem solving and decision-making skills. · Ability to work in a team environment on a variety of complex projects. · Well-developed interpersonal, organizational, and analytical skills · Well-developed written and verbal communication skills. Preferred Experience · Prefer completion of technical training at an accredited technical school for industrial maintenance/mechanic · Prefer 6+ months experience working as an industrial maintenance mechanic, preferably in a food production facility Apply at ************************* Company Information: Thank you for your interest in becoming part of the Rochelle Foods Team! At the Rochelle Foods plant, Employee Safety and Food Safety are our top priorities! We believe every employee has the responsibility to maintain a safe working environment by closely following our safety policies and actively engaging in our safety policies and actively engaging in our safety culture. Also, by adhering to the highest food safety standards, our manufacturing facility is able to produce quality, wholesome foods to our consumers. Employee Food & Safety: At Rochelle Foods, Employee Safety and Food Safety are our top priorities! We believe every employee has the responsibility to maintain a safe working environment by closely following our safety policies and actively engaging in our safety culture. Also, by adhering to the highest food safety standards, our manufacturing facility is able to produce quality, wholesome foods to our consumers. Benefits: Our benefits package includes a comprehensive health insurance plan, prescription drug plan, dental and vision plan, 401(k) with company match, employee assistance and wellness plan, life insurance, short-term disability, long-term disability, vacation and holiday pay, and educational assistance for employees and their dependents. New Employees: New Employees at our facility are immediately place on a 3-month probationary period. During this time, employee attendance and performance are closely monitored. While on probation, management reserves the right to move and employee to a different open position anywhere in our facility to meet the needs of the business. We appreciate our consideration of our company as your next employer and look forward to hearing from you! If you need assistance completing the online application, please contact the HR office at ************. Rochelle Foods provides equal employment opportunities to applicants and employees without regard to race; color; sex; gender identity; sexual orientation; religious practices and observances; national origin; pregnancy, childbirth, or related medical conditions; status as a protected veteran or spouse/family member of a protected veteran; or disability.
$29.6-32.4 hourly 1d ago
Document Control Specialist
Access Vascular 4.2
Pinehurst, MA job
Provides for the creation and development of medical device design and quality documentation as well as the management and control of our Quality Management System, including the documents, records and associated processes. Works with technical teams to establish criteria and best practices for document development, management, and change control. Establishes and maintains a central repository, including history files, for all controlled Quality & Regulatory documents and records. Perform various duties essential to the implementation and execution of our electronic documentation system, including coordinating efforts for the control of new and updated Quality System procedures for ISO/QMSR. ESSENTIAL JOB RESPONSIBILITIES AND DUTIES INCLUDE Ensure the consistency and quality of AVI product, process, and policy documentation in strict compliance to corporate policies, regulations and standards, from document creation to hard-copy and electronic filing to document obsolescence Assist technical team in the use of documentation standards, such as protocols, reports, procedures, material and assembly specifications, customer documentation, and product labeling. Ensure the consistency and quality of documents with the change control process. Identify, generate and publish Quality metric reports related to Document Control and Training. Facilitates the effective processing of quality system documents to ensure they are maintained and archived in an organized and retrievable state (manual or electronic) for accountability and access for any regulatory body. Establishes and maintains library of product and process-related reference standards, regulations, guidances, clinical articles and journals. Support the AVI Quality Management System as required, including continuously streamlining and improving QMS procedures and supporting Internal and External Audits. REQUIREMENTS A minimum of 3 years of experience in a medical device design/manufacturer environment responsible for documentation control. Minimum of an Associate's Degree in a Science or Technical discipline. Multiple certifications specific to medical device quality and/or standards may be considered for a non-degreed professional, along with equivalent industry experience. Familiarity with documents that support the following in a medical device environment: new product development (protocols, reports, software, validation data, Design History Files), quality system (procedures, forms, quality records), and manufacturing (Device Master Record, Bills of Material, routers, procedures, Device History Records) documentation Past experience with electronic documentation control systems Exposure of 21 CFR Part 11 and Computer/Quality System Software management methods preferred Strong verbal and written communication skills and effective interpersonal skills. Ability to multitask, prioritize and meet deadlines. Must to be to work independently or as part of a team Experience in data entry, handling electronic files Above average organizational skills, detail-oriented while being flexible, able to adapt to changing priorities is required. Proficiency with Microsoft Office, Access, Visio, Project Proficiency with technical document source applications such as Adobe Acrobat, Framemaker, SolidWorks, Illustrator is highly recommended.
$40k-51k yearly est. Auto-Apply 4d ago
Welder
Lincoln Electric 4.6
Reno, NV job
Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Reno Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: $41,600 - $52,000 Target Bonus: 5.0% Req ID: 27625 Company Overview Lincoln Electric Cutting Systems (Torchmate and Vernon Tool) is the world's leading manufacturer of low cost CNC solutions and has been manufacturing cutting machines for over 30 years. We offer solutions from small home machines to large capacity industrial machines. The Lincoln Electric Company is a $2.9B publicly traded company (NASDAQ) with over 10,000 employees around the world. Our expertise in the design, development and manufacture of welding and cutting products, systems and solutions allows businesses and individuals to focus on their passions, while we focus on the arc. With operations in over 40 manufacturing locations in 19 countries, we are well positioned to continue this partnership and poised to grow with our customers. As a part of that continuing legacy, you will contribute to a new generation of innovation and experience the pride that comes with being part of the solution to the world's challenges. It is a great time to be part of the welding industry! Are you ready? Position Summary We are seeking a reliable, motivated, and hardworking Welder to join our team. Under general supervision, the ideal candidate will perform a variety of skilled mechanical tasks. Job tasks include fabricating, assembling, and repairing custom machines, and other duties as assigned. Job Duties and Responsibilities Build and test equipment, tools, and fixtures using mechanical assembly and fabrication skills Operate industrial equipment including forklifts and production support equipment (training available) Read and interpret drawings and work instructions Complete assigned documentation Education and Experience Must have high school diploma or equivalent Must have 1 to 3 years fabrication experience Uncompromising attitude toward safety, quality, and customer service Understand blueprints and work instructions Must be well-organized with excellent communication and interpersonal skills Strong working knowledge of basic hand tools Working knowledge of electrical components Able to complete basic mechanical troubleshooting Working knowledge of layout tools and application (tape measure, square, calipers) Ability to work Saturdays and overtime, when necessary Working Conditions Manufacturing environment; may be exposed to loud noises, changing temperatures, and machinery with moving parts. Must be physically able push, pull, bend, stoop, climb, reach, frequently lift and/or move up to 25 pounds, occasionally lift and/or move up to 50 pounds, and stand on concrete. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.
$41.6k-52k yearly 3d ago
Applications Process Engineer
Lincoln Electric 4.6
Fort Loramie, OH job
Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Fort Loramie Req ID: 27957 Position Summary Identify the manufacturing process, recommend the machinery concept, accurately develop the cost model, create quotations and provide other supporting information as needed to sell Lincoln Electric Automation-designed equipment. **This position can sit in our Columbus, Coldwater or Fort Loramie, OH facilities and is hybrid - 2-3 days per week onsite*** Role Qualifications Must be familiar with Company quality objectives and play an active role in reaching continuous improvement objectives. Play an active role reviewing and developing customer process requirements as it pertains to the application of our products. Play an active role in communicating issues that could impact customer satisfaction. Position Responsibilities Evaluate the feasibility of automation systems based on data supplied by Sales, Engineering, Management and Customers. Develop manufacturing processes and concepts capable of producing systems or products Research and develop accurate cost estimates for Lincoln Electric Automation equipment. Write technical quotations and produce supporting documentation as needed. Assist as necessary with customer communication, presentations, and trade related events. Follow-up as necessary with sales, customers, and representatives. Responsible for following Department ISO procedures. Essential Skills and Experience Minimum High School Diploma, Associate degree in technical discipline desired (Business, Engineering Technology, Technical Sales, Project Management or similar) CAD (3D modeling a plus). Preferred 5 years of experience in manufacturing and design (mechanical/electrical) of industrial automated equipment. Metal forming (bending, forming, piercing, etc.) and metal joining (Laser, arc, resistance welding, etc.) experience preferred. Preferred 1-2 years of experience, working with customers and suppliers. Years of experience will influence final selection. Proficient in Word, Excel and PowerPoint. Effective writing and communication skills. Commitment to company values. Educational, training, and experience requirements may be modified at the Managements Team's discretion. Nonessential Skills and Experience Computer proficiency, including spreadsheet, word processing, and project management software. FMEA, Equipment Capability, Safety (OSHA Stds.) Environmental, Health & Safety (EH&S) Understand the Company's EHS Policy and how it relates to this job. Be aware of OSHA & EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. Work in a safe and environmentally friendly manner and observe all company EHS procedures. Know that the company EHS procedures are located on the ISO drive. Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS procedures. Attend required EHS training Physical Demands and Work Environment The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing duties of job, employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk and hear. Repetition with activity; computer work. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work environment: The noise level in the work environment is usually moderate. ISO-14001 Complies with ISO 14001, and other relevant standards. Support, implement and understand the intent of the EMS policy. Participates with ISO-14001 as required. AS 9100 w/ ISO 9001 Complies with AS9100D and ISO 9001:2015 quality management system, procedures, and work instructions General sign-off: The employee is expected to adhere to all company policies Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.
$60k-75k yearly est. 3d ago
Trainee
Lincoln Electric 4.6
Coldwater, OH job
Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Coldwater Req ID: 28002 Job Responsibilities Position Summary: We are seeking applicants for a Trainee position which is an entry level Skilled Trades employee to perform general machine shop cleanup duties. This position is an opportunity to gain experience in a machine shop setting for an individual who would potentially grow into a member of LEA Coldwater's Apprenticeship Program. Role qualifications: • Must be familiar with Company quality objectives and play an active role in reaching continuous improvement objectives. • Be aware of the relevance and importance of their activities and how they contribute to the achievement of quality objectives. Position responsibilities: • Ensure cleanliness and organization of the manufacturing shop • Assist with set up and tear down of any company wide meeting • Perform other duties as assigned • Work well with helpers, Engineers, Management, and support functions Job Requirements Essential skills and experience: • Pending or earned High School Diploma • Vocational training in Machine Trades or equivalent preferred • Demonstrated aptitude for mechanical trades and applied mathematics • Demonstrated eagerness to work and learn metalworking • Basic mechanical knowledge of machines and tools • Commitment to company values. • Educational training and experience requirements may be modified at the Managements Team's discretion. Behavioral Traits: • Highly self-motivated and driven • Dependable • Organized • Active listener • Forward thinking attitude and the continual need to refine and polish work, by seeking to exceed customer and Company's expectations Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.
$35k-43k yearly est. 5d ago

Avantor jobs in Bridgewater, NJ - 83728 jobs

Senior Scientist - Process Development

CDL DRIVER

HVM, Inside Sales Engineer - Pittsburgh

General Production, Machine/Chemical Operators

MuleSoft Developer

Electrical Engineer - Plant Engineering

Sr. Technical Thermal Sales Engineer, GSA

HVM Electrical Technical Sales Specialist - Cleveland

Quality Technician

Machine Repair Electrician

Manufacturing Materials and Planning Manager

Oiler

Embedded Software Engineer

Machinist Maintenance

Mechanical Design Engineer

Rochelle Foods - Maintenance Mechanic 2nd/3rd Shift 2026

Document Control Specialist

Welder

Applications Process Engineer

Trainee

Learn more about Avantor jobs

Most common locations at Avantor

Working at related companies

Related companies jobs

Jobs in nearby cities