Aviation Engineer remote jobs

The T-6 COMBS Aeronautical Engineer provides program-level engineering and technical support for the T-6 Contractor Operated and Maintained Base Supply (COMBS) program across all sites. This role focuses on evaluating part discrepancies, reviewing technical data, assessing configuration impacts, and supporting material-related engineering decisions rather than performing or directing hands-on aircraft maintenance. The Aeronautical Engineer supports Time Compliance Technical Orders (TCTOs), Technical Directives (TDs), and Time Change Interval (TCI) actions to ensure parts, components, and configurations meet airworthiness, OEM, contractual, and customer requirements. The engineer works closely with the Program Management Office (PMO), Supply Chain, Quality Assurance, Maintenance Control (for coordination only), and OEM/government engineering representatives to resolve parts-related issues, support Over & Above (O&A) justifications, and maintain accurate configuration control in support of fleet readiness. Although this is a remote position, the preferred candidate will live within a commutable distance to the OKC area. **JOB DUTIES:** Responsibilities may include, but are not limited to: + Review, interpret, and apply OEM technical data, service bulletins, engineering drawings, and directives. + Evaluate parts and component discrepancies to determine engineering disposition and configuration impact. + Provide technical support for Over and Above (O&A) requests, cost estimates, and engineering justifications. + Support TCTO, TD, and TCI planning, implementation coordination, and compliance tracking at the program level. + Ensure technical directives and configuration changes are accurately reflected in supply and maintenance data systems. + Coordinate with OEM and government engineering authorities on part applicability, substitutions, and approvals. + Maintain configuration control and support updates to aircraft and equipment records from a material and engineering perspective. + Perform data analysis on part reliability, usage trends, and recurring component issues to recommend improvements. + Support Material Review Board (MRB), Failure Review Board (FRB), and non-conformance resolution for parts and material-related issues. + Assist in the development of engineering change proposals (ECPs) and process improvements. + Collaborate with Quality Assurance to address part quality concerns and support audits or inspections. + Provide engineering input during program reviews, readiness assessments, and fleet status meetings. + Prepare technical reports, briefs, and presentations for PMO, supply chain, and customer stakeholders. + Ensure compliance with FAA, military, OEM, contractual, and customer regulations and standards. + Perform other engineering duties as assigned to support COMBS program objectives and material readiness **QUALIFICATIONS:** + **Education and Experience:** + Bachelor's degree in Aeronautical, Aerospace, or Mechanical Engineering (preferred). + 3+ years of aviation/aerospace engineering experience required (military or contractor environment preferred). + Experience with T-6 aircraft or trainer platforms highly desired. + Experience with OEM, FAA, or military airworthiness standards preferred. + Experience with configuration management, material engineering, or supply support systems preferred.. + **Knowledge, Skills, and Abilities (Required Skills include the ability to:)** + Strong knowledge of aeronautical or aerospace engineering principles. + Experience with aircraft parts, component configuration, and material engineering (T-6 experience preferred). + Familiarity with technical directives (TCTO, TD, TCI) and configuration management. + Ability to read and interpret OEM technical data, drawings, maintenance manuals, and engineering standards. + Strong analytical skills for evaluating parts and determining engineering disposition. + Experience with reliability, root cause analysis, and corrective action processes. + Proficiency in Microsoft Office Suite and engineering software tools (e.g., CAD, modeling, data analysis). + Strong written, verbal, and presentation communication skills. + Ability to work collaboratively with PMO, supply chain, QA, and external stakeholders. + High attention to detail and commitment to airworthiness and quality. + Ability to manage multiple tasks and priorities in a fast-paced program environment. + High level of integrity and professionalism. **_The salary range for this position is between $90,000 and $110,000 based on qualifications and program requirements_** **Benefits include the following:** + Healthcare coverage + Retirement Plan + Life insurance, AD&D, and disability benefits + Wellness programs + Paid time off, including holidays + Learning and Development resources + Employee assistance resources _Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans._ Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

The T-6 COMBS Aeronautical Engineer provides program-level engineering and technical support for the T-6 Contractor Operated and Maintained Base Supply (COMBS) program across all sites. This role focuses on evaluating part discrepancies, reviewing technical data, assessing configuration impacts, and supporting material-related engineering decisions rather than performing or directing hands-on aircraft maintenance. The Aeronautical Engineer supports Time Compliance Technical Orders (TCTOs), Technical Directives (TDs), and Time Change Interval (TCI) actions to ensure parts, components, and configurations meet airworthiness, OEM, contractual, and customer requirements. The engineer works closely with the Program Management Office (PMO), Supply Chain, Quality Assurance, Maintenance Control (for coordination only), and OEM/government engineering representatives to resolve parts-related issues, support Over & Above (O&A) justifications, and maintain accurate configuration control in support of fleet readiness. Although this is a remote position, the preferred candidate will live within a commutable distance to the OKC area. JOB DUTIES: Responsibilities may include, but are not limited to: Review, interpret, and apply OEM technical data, service bulletins, engineering drawings, and directives. Evaluate parts and component discrepancies to determine engineering disposition and configuration impact. Provide technical support for Over and Above (O&A) requests, cost estimates, and engineering justifications. Support TCTO, TD, and TCI planning, implementation coordination, and compliance tracking at the program level. Ensure technical directives and configuration changes are accurately reflected in supply and maintenance data systems. Coordinate with OEM and government engineering authorities on part applicability, substitutions, and approvals. Maintain configuration control and support updates to aircraft and equipment records from a material and engineering perspective. Perform data analysis on part reliability, usage trends, and recurring component issues to recommend improvements. Support Material Review Board (MRB), Failure Review Board (FRB), and non-conformance resolution for parts and material-related issues. Assist in the development of engineering change proposals (ECPs) and process improvements. Collaborate with Quality Assurance to address part quality concerns and support audits or inspections. Provide engineering input during program reviews, readiness assessments, and fleet status meetings. Prepare technical reports, briefs, and presentations for PMO, supply chain, and customer stakeholders. Ensure compliance with FAA, military, OEM, contractual, and customer regulations and standards. Perform other engineering duties as assigned to support COMBS program objectives and material readiness QUALIFICATIONS: Education and Experience: Bachelor's degree in Aeronautical, Aerospace, or Mechanical Engineering required. 3+ years of aviation/aerospace engineering experience required (military or contractor environment preferred). Experience with T-6 aircraft or trainer platforms highly desired. Experience with OEM, FAA, or military airworthiness standards preferred. Experience with configuration management, material engineering, or supply support systems preferred.. Knowledge, Skills, and Abilities (Required Skills include the ability to:) Strong knowledge of aeronautical or aerospace engineering principles. Experience with aircraft parts, component configuration, and material engineering (T-6 experience preferred). Familiarity with technical directives (TCTO, TD, TCI) and configuration management. Ability to read and interpret OEM technical data, drawings, maintenance manuals, and engineering standards. Strong analytical skills for evaluating parts and determining engineering disposition. Experience with reliability, root cause analysis, and corrective action processes. Proficiency in Microsoft Office Suite and engineering software tools (e.g., CAD, modeling, data analysis). Strong written, verbal, and presentation communication skills. Ability to work collaboratively with PMO, supply chain, QA, and external stakeholders. High attention to detail and commitment to airworthiness and quality. Ability to manage multiple tasks and priorities in a fast-paced program environment. High level of integrity and professionalism. Benefits include the following: Healthcare coverage Retirement Plan Life insurance, AD&D, and disability benefits Wellness programs Paid time off, including holidays Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

LMI is seeking a Modeling Simulation Cloud Engineer to join the RAPTR Platform development team. RAPTR is a next-generation modeling and simulation platform, designed to help solve the U.S. government's toughest mission and operational challenges. This role will focus on building cloud-native orchestration, compute, and scalability for RAPTR and its modeling and simulation engine, RSIM. The ideal candidate will bridge cloud engineering expertise with mission-focused product development, working closely with the RAPTR engineering team and interfacing with LMI's IronSled (CI/CD pipeline team) to ensure solutions meet strict security and compliance requirements. This is a 100% remote role with quarterly travel for in person team planning and collaboration events. This position requires the ability to obtain a Secret clearance. You must be a U.S. citizen. LMI is a new breed of digital solutions provider dedicated to accelerating government impact with innovation and speed. Investing in technology and prototypes ahead of need, LMI brings commercial-grade platforms and mission-ready AI to federal agencies at commercial speed. Leveraging our mission-ready technology and solutions, proven expertise in federal deployment, and strategic relationships, we enhance outcomes for the government, efficiently and effectively. With a focus on agility and collaboration, LMI serves the defense, space, healthcare, and energy sectors-helping agencies navigate complexity and outpace change. Headquartered in Tysons, Virginia, LMI is committed to delivering impactful results that strengthen missions and drive lasting value. Why Join Us At LMI, you will work on innovative solutions that directly impact national security, logistics, and decision-making for some of the government's most complex challenges. You will be part of a collaborative team building a secure, cloud-native platform that redefines how modeling and simulation informs operations. Responsibilities Design, implement, and maintain cloud-native orchestration and compute solutions to support RAPTR and RSIM scalability. Develop infrastructure-as-code (IaC) for deployment and automation of RAPTR workloads. Collaborate with RAPTR software engineers, modelers, and analysts to optimize performance for large-scale simulations. Partner with the Ironsled DevSecOps/CI-CD pipeline team to align deployments with enterprise security and compliance frameworks. Implement monitoring, logging, and alerting to ensure system reliability and availability. Drive cloud architecture decisions that balance scalability, resilience, cost-efficiency, and security. Support containerization and orchestration (e.g., Kubernetes, Docker) to streamline deployment and scaling. Troubleshoot issues across cloud infrastructure, networks, and simulation workloads. Stay current with advances in cloud technologies and recommend improvements to enhance RAPTR capabilities. Qualifications Bachelor's degree in Computer Science, Engineering, or related field (or equivalent work experience). 5+ years of hands-on experience with cloud infrastructure (AWS, Azure, or GCP). Previous experience with modeling and simulation (M&S) tools and platforms like Prefect.io and Airflow. Strong proficiency with containerization and orchestration technologies (Kubernetes, Docker, ECS/EKS/AKS). Demonstrated experience with Infrastructure-as-Code (Terraform, CloudFormation, Pulumi, etc.). Familiarity with CI/CD pipelines, security requirements, and DevSecOps practices. Experience with distributed computing, parallel processing, or scaling compute-intensive workloads. Strong problem-solving skills and ability to work in a collaborative, fast-paced environment. Ability to obtain a Secret clearance. You must be a U.S. citizen. Desired Qualifications Experience supporting modeling and simulation platforms or compute-intensive applications. Knowledge of DoD cloud security requirements (IL4/IL5, FedRAMP, CMMC). Familiarity with data pipelines, orchestration frameworks (e.g., Prefect, Airflow), or HPC/cluster environments. Experience working in Agile development teams. We can recommend jobs specifically for you! Click here to get started.

Looking for an opportunity to make an impact? At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers' success. We empower our teams, contribute to our communities, and operate sustainable. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. Leidos is seeking a talented Aerospace Engineer to work remotely for the team located in our Huntsville, AL office. In the Leidos Autonomy and Artificial Intelligence branch, you will work to solve complex engineering problems with a highly technical, multidisciplinary team consisting of aerospace engineers, computer scientists, research scientists, and statisticians. This group provides cutting-edge solutions to aerospace and defense problems such as autonomous battle management, robotic vehicle guidance, and model-based system identification. Primary Responsibilities Employees in this role will work to develop solutions and manage technical teams for aerospace and defense problems by applying a variety of engineering, AI/ML, and software technical skills. To succeed in this role, engineers are required to leverage internal resources (e.g., software toolkits), collaborate with peers and experienced professionals, and learn independently. Basic Qualifications Bachelor's or graduate degree in Aerospace Engineering with 8-15 years of work experience. Advanced proficiency in programming, specifically including Python and MATLAB. Fundamental understanding of mathematical concepts, including linear algebra, matrix math, statistics, trigonometry, and coordinate frames. Aerospace Engineering: Fundamental understanding of core aerospace concepts, such as vehicle and attitude dynamics, control systems, and flight mechanics. Computer Science / Math: Understanding of machine learning basics, supervised learning, reinforcement learning, and statistics. Ability to perform independent research to learn new skills. Ability to work both in collaborative team environments and independently on open-ended research problems. Effective technical communication skills. Ability to manage teams of engineers and architect technical solutions to complex problems. Must be a US citizen Ability to obtain and maintain a TS/SCI with CI Poly clearance. Preferred Qualifications Research experience. Experience with C++. Experience with Linux. Program management experience. Experience with version control systems (e.g. Git). Active security clearance. If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo - because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 - and moving faster than anyone else dares. Original Posting:September 23, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range:Pay Range $104,650.00 - $189,175.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

CRASH SIMULATION ENGINEER (NHTSA): Bowhead is seeking a Crash Simulation Engineer to support the National Highway Traffic Safety Administration contract headquartered in Washington D.C. The position will be fully remote. The crash simulation engineer is responsible for the development, evaluation and/or application of finite element and/or lumped parameter models in vehicle crash safety & human injury research. This position requires knowledge of vehicle design, crash safety countermeasures, laboratory measurement techniques, vehicle sled modeling and analysis, and test/evaluation devices such as crash test dummies and human body models. Individuals will be required to provide significant technical leadership and contribute to the technical direction of projects. Responsibilities Plan, design, coordinate and control the progress of project work to meet client objectives Lead technical efforts and keep up to date with current industry best practices Create sled FE models, position various crash test dummies and human FE models, carry out vehicle impacts and perform injury analysis Perform post simulation data analysis such as injury analysis per FMVSS/NCAP regulations and statistical techniques Provide recommendations to client regarding planning, analysis and reporting efforts Develop technical reports and presentations to communicate complex research in a clear and comprehensive manner Qualifications MS in engineering (mechanical engineering preferred) Technical areas of expertise include engineering dynamics, materials engineering, mechanical engineering, biomechanical engineering and/or structural engineering Experience in the evaluation of laboratory test results from impact testing including vehicles, vehicle components, anthropomorphic dummies, and/or post mortem human subjects Experience with running vehicle crash simulations using LS-DYNA (2+ years of experience) Demonstrated experience in performing post-crash simulation injury analysis such as HIC, BrIC, Nij, femur/tibia forces etc. Experience with Design of Experiments, optimization, and statistical analysis Knowledge of Federal Motor Vehicle Safety Standards (FMVSS) Demonstrated experience with optimization programs such as LS-OPT and 3D modeling programs such as ANSA, META, Oasys Primer etc. Familiarity with crash investigation reports and crash reconstruction methods Good written and verbal communication skills as evidenced by technical publications / conference presentations Demonstrated experience in laboratory measurement techniques and knowledge of the laws of physics, continuum mechanics, and statistical data treatments Preferred Qualifications: Python Programming Car crash modeling and simulation Crash data analysis and accident reconstruction Understanding of biomechanical structures (human body response and tolerance) LS-OPT experience, Design of Experiments (DOE), optimization Physical Demands: • Must be able to lift up to 25 pounds • Must be able to stand and walk for prolonged amounts of time • Must be able to twist, bend, and squat periodically SECURITY CLEARANCE REQUIREMENTS: Must be able to obtain a Public Trust (NAC) level clearance. #LI-KC1

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality. As a Sr. Flight Controls Engineer at Reliable Robotics, you will be part of the Guidance, Navigation, and Control (GNC) Team. You will design, implement, integrate, and test flight control laws for all phases of operation including autotaxi, auto-takeoff, autoland, and automatic rollout. You integrate real-world hardware and C/C++ flight software as part of ongoing flight test programs, and perform simulation analysis and data reduction in our Python and C/C++ modeling & simulation environment.Responsibilities Establish autoflight and flight control system requirements Interface with Pilots and Operations team to develop flight test plans, respond to squawks, and communicate design updates Design and analyze flight control laws from conceptual design through implementation and certification Develop simulation models to evaluate flight control system performance and stability Implement control laws and algorithms in flight software Test flight software in simulation, Monte Carlo, hardware-in-loop, and flight Basic Success Criteria MS in aerospace engineering, robotics, or equivalent field 8+ years of hands on, professional experience developing and testing flight controls algorithms Experience with flight dynamics simulation and model identification Professional experience with developing C/C++ flight software and Python data reduction & analysis Excellent written and verbal communication skills Preferred Criteria PhD in aerospace engineering, robotics, or similar advanced degree Current pilot, instrument or commercial ratings Experience with flight controls, autopilot, or flight management system certification We are developing and building high-integrity, safety-critical systems for automated flight, and your role is critical to what we do at Reliable Robotics. With the support of the entire team, you will be making key contributions to the autoflight system that drive our core company mission forward. Must be willing to travel up to 25% of the time. The estimated salary range for this position is $200,000 to $280,000/annual salary + cash and stock option awards + benefits. At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity. In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers and a casual work environment. This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws. All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis. At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need. If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to ****************

We are seeking a highly skilled leader to join our cutting-edge missile defense development team. In this role, you will lead the design, development, integration, and testing of advanced models and simulations supporting target detection, tracking, guidance, and engagement. You will collaborate with a multidisciplinary team of engineers and defense experts to deliver mission-critical solutions that ensure national security. The modeling and simulation lead will manage all internal and sub-contracted activities associated with Integrated Flight Simulations and Missile Flyout Simulations, including managing software, hardware, and integrated data environment requirements. Responsibilities * Develop and deliver an Integrated Flight Simulation (IFS), which is an all-digital system performance simulation, and a Missile Flyout Simulation (MFS), which simulates real-time flyouts for testing with the tactical system in lab and field environments. * Develop and deliver an MFS user manual that provides detailed instructions for installation and execution of simulation, along with explanation of the inputs and outputs. * Responsible for Modeling & Simulation (M&S) Contract Deliverables (CDRLs), including interpretation of delivery needs from CDRL requirements and Data Item Descriptions (DIDs), which may include working with suppliers to develop their content to support. * Interface with systems engineers, algorithm developers, and hardware teams to integrate and validate end-to-end system functionality. * Lead software architecture and technical design decisions, ensuring scalability, reliability, and security. * Support testing activities, including simulation, modeling, hardware-in-the-loop (HWIL), and live-fire scenarios. * Ensure software meets Department of Defense (DoD) standards for cybersecurity, anti-tamper, safety, and quality. * Author and maintain technical documentation in support of program reviews and compliance requirements. * Support program working groups and other customer program milestones. * Mentor junior engineers and contribute to a culture of technical excellence and continuous improvement. Essential Skills * Master's degree plus 5 years' experience, or a bachelor's degree plus 10 years' experience in Aerospace Engineering, Mechanical Engineering, Physics, Computer Science, Software Engineering, or related fields. * Experience in systems engineering, missile defense, embedded systems, modeling and simulation, and validation. * Experience in flight and guidance controls, and simulation tools, including 6DOF, for interception systems from the detection stage to the impact. * Experience with Red Hat Enterprise Linux (RHEL) and servers. * Experience integrating with tactical or simulated equipment such as a Weapons Interface Units, to receive launch commands and in-flight updates. * Experience with real-time systems, embedded software, or multi-threaded applications. * Deep understanding of software development life cycles, configuration management, and testing methodologies. * Experience working in Agile and DevSecOps environments. * Familiarity with MIL-STD software and hardware integration practices. * Willing and able to travel internationally for technology transfer. * Active clearance or U.S. Citizenship with the ability to obtain clearance. Additional Skills & Qualifications * Experience with missile defense systems (e.g., Indirect Fires Protection Capability, Integrated Battle Command System, Battle Management Command System, Iron Dome Defense). * Experience with radar systems, sensor fusion, or fire control algorithms. * Experience with simulation frameworks such as STK, MATLAB, or custom missile defense applications. * Experience developing CDRLs and formal reports for the U.S. DoD. * Desired skills include familiarity with Weapon Open Systems Architecture (WOSA), Modular Open Systems Approach (MOSA) architecture, and Cybersecurity Analysis (CSA). * Experience with IDL, XML, or API Apps is a plus. Work Environment The position is ideally based in HSV, with the facility expected to be established there in the future. However, the role will primarily be remote with VPN access as needed. The candidate must be willing to travel to Israel three times within the first six months and be on-site in HSV twice. Job Type & Location This is a Contract to Hire position based out of Huntsville, AL. Pay and Benefits The pay range for this position is $50.00 - $80.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully remote position. Application Deadline This position is anticipated to close on Dec 24, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Our team members are at the heart of everything we do. At Cencora, we are united in our responsibility to create healthier futures, and every person here is essential to us being able to deliver on that purpose. If you want to make a difference at the center of health, come join our innovative company and help us improve the lives of people and animals everywhere. Apply today! Job Details We are seeking a talented and experienced Supply Chain Simulation Engineer to lead and collaborate on the design, development, and deployment of tools and strategies that will enable more effective data-driven decision making. This individual will provide guidance through advanced analytics modeling and optimizing facilities within the Supply Chain. The Simulation Engineer should have a firm understanding of distribution operational and automation processes. The ideal candidate will be a skilled communicator with experience telling compelling stories through data-driven insights. Roles and Responsibilities: Create simulation models of our distribution centers that will help determine efficiency opportunities. Understand and have experience with design and / or implementation of automation solutions such as conveyors, sorters, high speed picking and packaging lines, robotic work cells. Work closely with other teams, such as Engineering and Operations, in the validation of the models and in the design of potential scenarios that will improve the total outcome. Collaborate in developing a cost to serve model. Implement and support the new inhouse simulation capabilities - process, tools, training. Collaborate in the creation of business cases to close gaps and define capex requirements. Provide advice and insights on improving existing simulation capabilities. Design interactive business intelligence dashboards to share input and outputs. Develop and train team to utilize self-service modeling functionality. Stay up to date with modeling and simulations trends. Perform other duties as assigned. Education: A Bachelors degree in Industrial Engineering, Operations Research, Quantitative Methods, Data Science or related field or equivalent professional qualification/workplace skills. Master's degree preferred. Experience: Requires five (5) to seven (7) years of directly related and progressively responsible experience. Hands-on experience using simulation and analytical tools to solve operational problems. Practical experience with Simulation frameworks (discrete-event, agent-based) and technologies such as AnyLogic/Arena/EnterpriseDynamics/FlexSim/etc Project Management / Agile hands-on experience. Experience working in an Operations environment. Experience with business intelligence tools (PowerBI, Tableau, Qlik). Experience pulling and cleaning data from Cloud Platforms (Google, Azure), or Supply Chain Tools (including ERP, WMS, TMS, Inventory & Forecasting Tools). Experience programming with data analytic tools such as SQL, Python, DataBricks, etc. Experience transforming CAD data into simulation tools. Experience building business cases and cost/benefit analysis to support strategic decision making. Skills and Abilities: Strong analytical and critical thinking skills, with the ability to identify and resolve complex issues quickly and innovative. Experience leveraging analytic based approaches to problem solving, such as Statistical Process Control, Design of Experiments, Six Sigma, or other statistical analysis frameworks. Team oriented and collaborative working style. Growth mindset, positive attitude and strong interest in solving business challenges and adapting to a changing work environment. Ability to communicate effectively both orally and in writing; ability to communicate (and work) effectively with people from different technical and business backgrounds, acting as a liaison, understanding, and appreciating different perspectives and translating into terms necessary for any group or individual to understand. Presentation skills: ability to present and discuss technical information in a manner that establishes rapport, persuades others, and establishes understanding for technical and non-technical audiences. Strong organizational skills; attention to detail. Must be able to interact well with others both directly (face-to-face) and remotely within a multi-discipline shared work environment. Ability to influence through the use of data and insights while showing tactful discretion with difficult/sensitive information. Travel required per project, estimated at 2 weeks per quarter. Ability to manage multiple projects What Cencora offers We provide compensation, benefits, and resources that enable a highly inclusive culture and support our team members' ability to live with purpose every day. In addition to traditional offerings like medical, dental, and vision care, we also provide a comprehensive suite of benefits that focus on the physical, emotional, financial, and social aspects of wellness. This encompasses support for working families, which may include backup dependent care, adoption assistance, infertility coverage, family building support, behavioral health solutions, paid parental leave, and paid caregiver leave. To encourage your personal growth, we also offer a variety of training programs, professional development resources, and opportunities to participate in mentorship programs, employee resource groups, volunteer activities, and much more. For details, visit ************************************** Full time Salary Range*$88,700 - 126,940 *This Salary Range reflects a National Average for this job. The actual range may vary based on your locale. Ranges in Colorado/California/Washington/New York/Hawaii/Vermont/Minnesota/Massachusetts/Illinois State-specific locations may be up to 10% lower than the minimum salary range, and 12% higher than the maximum salary range. Equal Employment Opportunity Cencora is committed to providing equal employment opportunity without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, disability, veteran status or membership in any other class protected by federal, state or local law. The company's continued success depends on the full and effective utilization of qualified individuals. Therefore, harassment is prohibited and all matters related to recruiting, training, compensation, benefits, promotions and transfers comply with equal opportunity principles and are non-discriminatory. Cencora is committed to providing reasonable accommodations to individuals with disabilities during the employment process which are consistent with legal requirements. If you wish to request an accommodation while seeking employment, please call ************ or email ****************. We will make accommodation determinations on a request-by-request basis. Messages and emails regarding anything other than accommodations requests will not be returned . Affiliated Companies:Affiliated Companies: AmerisourceBergen Drug Corporation

Lattice Overview There is energy here…energy you can feel crackling at any of our international locations. It's an energy generated by enthusiasm for our work, for our teams, for our results, and for our customers. Lattice is a worldwide community of engineers, designers, and manufacturing operations specialists in partnership with world-class sales, marketing, and support teams, who are developing programmable logic solutions that are changing the industry. Our focus is on R&D, product innovation, and customer service, and to that focus, we bring total commitment and a keenly sharp competitive personality. Energy feeds on energy. If you flourish in a fast paced, results-oriented environment, if you want to achieve individual success within a “team first” organization, and if you believe you can contribute and succeed in a demanding yet collegial atmosphere, then Lattice may well be just what you're looking for. Responsibilities & Skills Responsibilities: Create and maintain accurate SystemC models for security solutions. Implement Transaction-Level Modeling (TLM) interfaces for communication between models and other simulation environments. Validate SystemC models against hardware designs. Debug and resolve issues to improve model performance and stability. Work closely with architecture, design, and verification teams to define modeling requirements. Required Skills, Experience BS/MS/PhD in Electronics or Computer Engineering with minimum of 6 years' experience. Strong proficiency in SystemC and C++ (object-oriented design principles). Experience with TLM and hardware/software co-design methodologies. Familiarity with hardware description languages (VHDL/Verilog) is a plus. Knowledge of embedded systems architecture (processor architectures, memory hierarchies, bus protocols). Experience with using simulation tools (Cadence Xcelium, Synopsys VCS, Mentor Graphics QuestaSim). Knowledge in using cryptography libraries is a plus.

LMI is seeking a Modeling Simulation Cloud Engineer to join the RAPTR Platform development team. RAPTR is a next-generation modeling and simulation platform, designed to help solve the U.S. government's toughest mission and operational challenges. This role will focus on building cloud-native orchestration, compute, and scalability for RAPTR and its modeling and simulation engine, RSIM. The ideal candidate will bridge cloud engineering expertise with mission-focused product development, working closely with the RAPTR engineering team and interfacing with LMI's IronSled (CI/CD pipeline team) to ensure solutions meet strict security and compliance requirements. This is a 100% remote role with quarterly travel for in person team planning and collaboration events. This position requires the ability to obtain a Secret clearance. You must be a U.S. citizen. LMI is a new breed of digital solutions provider dedicated to accelerating government impact with innovation and speed. Investing in technology and prototypes ahead of need, LMI brings commercial-grade platforms and mission-ready AI to federal agencies at commercial speed. Leveraging our mission-ready technology and solutions, proven expertise in federal deployment, and strategic relationships, we enhance outcomes for the government, efficiently and effectively. With a focus on agility and collaboration, LMI serves the defense, space, healthcare, and energy sectors-helping agencies navigate complexity and outpace change. Headquartered in Tysons, Virginia, LMI is committed to delivering impactful results that strengthen missions and drive lasting value. Why Join Us At LMI, you will work on innovative solutions that directly impact national security, logistics, and decision-making for some of the government's most complex challenges. You will be part of a collaborative team building a secure, cloud-native platform that redefines how modeling and simulation informs operations. Responsibilities Design, implement, and maintain cloud-native orchestration and compute solutions to support RAPTR and RSIM scalability. Develop infrastructure-as-code (IaC) for deployment and automation of RAPTR workloads. Collaborate with RAPTR software engineers, modelers, and analysts to optimize performance for large-scale simulations. Partner with the Ironsled DevSecOps/CI-CD pipeline team to align deployments with enterprise security and compliance frameworks. Implement monitoring, logging, and alerting to ensure system reliability and availability. Drive cloud architecture decisions that balance scalability, resilience, cost-efficiency, and security. Support containerization and orchestration (e.g., Kubernetes, Docker) to streamline deployment and scaling. Troubleshoot issues across cloud infrastructure, networks, and simulation workloads. Stay current with advances in cloud technologies and recommend improvements to enhance RAPTR capabilities. Qualifications Bachelor's degree in Computer Science, Engineering, or related field (or equivalent work experience). 5+ years of hands-on experience with cloud infrastructure (AWS, Azure, or GCP). Previous experience with modeling and simulation (M&S) tools and platforms like Prefect.io and Airflow. Strong proficiency with containerization and orchestration technologies (Kubernetes, Docker, ECS/EKS/AKS). Demonstrated experience with Infrastructure-as-Code (Terraform, CloudFormation, Pulumi, etc.). Familiarity with CI/CD pipelines, security requirements, and DevSecOps practices. Experience with distributed computing, parallel processing, or scaling compute-intensive workloads. Strong problem-solving skills and ability to work in a collaborative, fast-paced environment. Ability to obtain a Secret clearance. You must be a U.S. citizen. Desired Qualifications Experience supporting modeling and simulation platforms or compute-intensive applications. Knowledge of DoD cloud security requirements (IL4/IL5, FedRAMP, CMMC). Familiarity with data pipelines, orchestration frameworks (e.g., Prefect, Airflow), or HPC/cluster environments. Experience working in Agile development teams.

Job DescriptionStructural Integrity Associates, Inc. (SIA) is seeking a Senior Engineering Consultant to join our Nuclear business unit. The position will be based in one of our main offices: San Jose, CA; Centennial, CO; or Huntersville, NC. Remote work will also be considered. The ideal candidate will possess a background in mechanics/structural engineering and be responsible for engineering consulting work supporting the energy industry. The role will be to support project teams in the areas of finite element modeling, stress analysis, fatigue and fracture mechanics and related fields. The work environment is a dynamic team based on project requirements. Each project team is usually led by an industry expert and composed of engineers from various engineering disciplines such as stress analysis, fracture mechanics, structural dynamics, and material science. Primary Responsibilities: Stress analysis of power plant structures, pressure vessels, piping systems, rotating equipment and other power plant components using both classical and numerical methods Stress analyses using the guidelines in the ASME Boiler and Pressure Vessel Code Supporting and leading the FEA team Support fatigue management programs for various components Participation in design and repair projects of pressure vessel/piping components and Communication with clients to provide engineering problem solution, results and analyses Required Skills/Qualifications: BS or MS in Mechanical Engineering or similar discipline 5+ years (with MS) or 7+ years (with BS) of related engineering experience Advanced skills in ANSYS APDL/Workbench (ABAQUS is a plus) Advanced finite element analysis of vessel, piping, valves and other nuclear components Experience with mechanical, thermal, and modal analyses, and non-linear metallic material models Assist and lead in maintaining company standards related to finite element analysis Proficiency in Section III, Div 1 of ASME Boiler and Pressure Vessel Code (BPVC) Experience in Section III, Div 5 and Section XI, Div 1 & 2 of ASME BPVC is a plus Attend client, vendor, and internal team meetings Proficient in writing technical reports and communication skills Desired Skills/Qualifications: PE License Scripts and subroutines for finite element codes (e.g., python) Experience in computational fracture mechanics Experience in CFD simulations in ANSYS Project management skills Pay Range: The expected salary range for this role is $100,560-$168,240 in San Jose, CA; $85,840-$142,800 in Denver, CO; and $78,480-$131,760 in Charlotte, NC. Exact pay will be commensurate with experience. Export Control Notice: Certain positions at SIA may require access to information and technology which is subject to Export Administration Regulations 15 CFR 730-774, including those of the US Department of Energy (DOE) in 10 CFR 810 and Nuclear Regulatory Commission (NRC) 10 CFR Part 110. Hiring decisions for such positions must comply with these regulations and may result in SIA limiting its consideration of foreign nationals who are citizens of countries that are not on the DOE's Generally Authorized Destinations List: *************************************************************************************************** About Us: SIA is an engineering consulting firm serving various industries including Nuclear Power, Energy Services, Pipeline Integrity, and Critical Infrastructure. Join a team of internationally recognized experts in a culture based on knowledge, excellence, and respect for one another. Our employees are members of a distinct community of internationally respected professionals committed to quality, engineering innovation and a shared goal of building a safer world. Why Work at SIA? SIA offers a competitive salary and performance-based bonus program. Our retirement benefits include a Traditional 401k, Roth 401k, and an employer match. To help employees maintain a work-life balance, SIA also offers various paid time off including vacation, floating holidays, sick time, and parental leave. Our employees also enjoy a comprehensive benefits program that includes the following: Medical, dental, and vision insurance Life Insurance and AD&D Short-term and long-term disability Health Savings Account with employer contribution Flexible Spending Account for health care and dependent care ID theft protection and credit monitoring Structural Integrity Associates, Inc. is an equal opportunity employer. ***************** SIA does not welcome third-party recruiters, employment agencies, headhunters, etc. Please do not reach out to SIA employees requesting a call, sit down, meeting, or email response. Powered by JazzHR TAF683lUX5

WHO ARE WE Sonaca North America is driven by a passion for innovation and a commitment to excellence. As a leading provider of aerospace and defense solutions, we are dedicated to making air and space travel safe and sustainable. We have 13 locations across North America and our engineering expertise and operational excellence set us apart from the competition. Since the beginning in 1948, we have a proven track record of delivering high-quality products and services that are reliable, safe, and efficient. Our team of experts is dedicated to staying ahead of the curve in the aerospace and defense industry, utilizing the latest technologies and processes to ensure that we deliver the best possible solutions to our customers. POSITION SUMMARY We are currently seeking a Stress Engineer III. Under the direction of the Engineering manager, supervisor or director, this position will provide stress analysis input to the Engineering Integrated Product Team (IPT) to ensure successful product development from conceptual layout stage through release of detail engineering and documentation. This position will coordinate with IPT to identify all design requirements and optimize load paths. The Stress Engineer III will develop and validate efficient stress analysis methodology using classical stress analysis methods and/or computer aided engineering solutions such as finite element models (FEM). Will often direct the work of other Stress Engineers and act as the Project lead. ESSENTIAL JOB RESPONSIBILITIES The Stress Engineer III will rely on extensive experience and judgment to plan and accomplish goals while performing a variety of complex tasks in the following areas: * Coordinate with customer to identify all design and stress requirements for a particular product * Evaluate requirements and structural complexity to determine the most effective stress analysis method. * Work with design during conceptual phase to optimize load paths. * Work with IPT throughout joint definition phase to optimize structure for weight, cost, and producbility while maintaining required strength and durability. Continue to optimize structure during release of detailed engineering. * Develop and validate internal loads using classical and finite element (FEM) approaches. * Provide detailed stress analysis of metal and composite structures by classical hand stress calculations and FEM analysis utilizing software such as NASTRAN/PATRAN. * Analyze ability of product to withstand stress imposed by conditions such as temperature, loads, motion, and vibration. * Provide fatigue and damage tolerance analysis as required. * Validate design for optimal material selection and corrosion prevention. * Support production by resolving manufacturing issues including disposition of rejection tags. * Provide fleet support by developing and substantiating repairs. * Direct preparation of final stress analysis reports to substantiate that the design satisfies all relevant EASA or FAA regulations and customer requirements. * Assist in preparation of test plans, provide technical support during testing, analyze test results and document conclusions. * Provide technical leadership and on-the-job training to team of assigned engineers to enhance skill development of junior engineers. * Coordinate all aspects of team activity to maximize productivity and meet schedule and cost targets. * Conduct frequent coordination with customer for all stress related issues, typically attending weekly customer meetings. Track status of action items and deliverables to and from customer. Prepare and present stress data for design reviews and other technical meetings with customer. * Directs work of others and acts as lead. * Performs other duties as required, such as bid and proposal support. EDUCATION AND EXPERIENCES * Requires a bachelor's degree in engineering and a minimum of 10+ years of experience in the Aerospace Industry or in a related field. * Advanced working knowledge of NASTRAN/ANSYS and MS Office products. * Basic working knowledge of CATIA V5. WHY CHOOSE SONACA NORTH AMERICA? We take care of our people. * 401(k) retirement savings plan with a percentage company-match contribution * Competitive wages * Paid holidays * Paid time off * Medical, dental, vision, life, and accidental insurance * Short-term disability * Long-term disability * Employee assistance plan - for access to counseling, consulting, and other community resources * Wellness program * Tuition assistance * Subject to eligibility, terms, and conditions Annual Salary Range = $116,680 - $192,360 This base pay range is specific to residents of California, Colorado, Connecticut, New Jersey, New York, Nevada, Ohio, Rhode Island, and Washington, and any other state that may require such disclosure. Compensation in other geographies may vary. This is only a summary of the typical functions of the job, not an exhaustive or comprehensive list of all possible job responsibilities, tasks, and duties. The responsibilities, tasks, and duties may differ from those outlined in the job description and other duties, as assigned, may be required. This document does not create an employment contract. Employees of the Company are employed on an "at will" basis and may be terminated at any time. Sonaca North America is an equal employment opportunity employer. Consistent with applicable law, Sonaca North America provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company's online application system. If an applicant is unable to fully access the online application system, Sonaca North America will provide a reasonable accommodation. Applicants with disabilities may contact us at ************ for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for Sonaca North America's Human Resources Department. Sonaca North America will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials. Sonaca North America is an E-Verify Employer. Sonaca North America is an Equal Employment Opportunity/Disability/Veterans Employer NOTICE ON FRAUDULENT JOB OFFERS It has been brought to our attention that there have been instances of fraudulent job offers, purporting to be from Sonaca North America and/or its affiliates ("LMI Aerospace"). This type of fraud is normally carried out through online services such as false websites, or through fake e-mails or call from people claiming to be from the company. These persons offer fraudulent employment opportunities to applicants and often ask for sensitive personal and financial information. The fraudsters may also request recipients to provide personal information and/or to make payments as part of their fake recruiting process. Sonaca North America does not ask for any financial commitments from candidates as a pre-employment requirement and will always require candidates to formally apply for positions via the Careers Page or job postings. Sonaca North America has no responsibility for fraudulent offers and if you believe you have been a victim of a fraudulent job offer concerning Sonaca North America, please email ******************.

WHO ARE WE Sonaca North America is driven by a passion for innovation and a commitment to excellence. As a leading provider of aerospace and defense solutions, we are dedicated to making air and space travel safe and sustainable. We have 13 locations across North America and our engineering expertise and operational excellence set us apart from the competition. Since the beginning in 1948, we have a proven track record of delivering high-quality products and services that are reliable, safe, and efficient. Our team of experts is dedicated to staying ahead of the curve in the aerospace and defense industry, utilizing the latest technologies and processes to ensure that we deliver the best possible solutions to our customers. POSITION SUMMARY We are currently seeking a Stress Engineer III. Under the direction of the Engineering manager, supervisor or director, this position will provide stress analysis input to the Engineering Integrated Product Team (IPT) to ensure successful product development from conceptual layout stage through release of detail engineering and documentation. This position will coordinate with IPT to identify all design requirements and optimize load paths. The Stress Engineer III will develop and validate efficient stress analysis methodology using classical stress analysis methods and/or computer aided engineering solutions such as finite element models (FEM). Will often direct the work of other Stress Engineers and act as the Project lead. ESSENTIAL JOB RESPONSIBILITIES The Stress Engineer III will rely on extensive experience and judgment to plan and accomplish goals while performing a variety of complex tasks in the following areas: Coordinate with customer to identify all design and stress requirements for a particular product Evaluate requirements and structural complexity to determine the most effective stress analysis method. Work with design during conceptual phase to optimize load paths. Work with IPT throughout joint definition phase to optimize structure for weight, cost, and producbility while maintaining required strength and durability. Continue to optimize structure during release of detailed engineering. Develop and validate internal loads using classical and finite element (FEM) approaches. Provide detailed stress analysis of metal and composite structures by classical hand stress calculations and FEM analysis utilizing software such as NASTRAN/PATRAN. Analyze ability of product to withstand stress imposed by conditions such as temperature, loads, motion, and vibration. Provide fatigue and damage tolerance analysis as required. Validate design for optimal material selection and corrosion prevention. Support production by resolving manufacturing issues including disposition of rejection tags. Provide fleet support by developing and substantiating repairs. Direct preparation of final stress analysis reports to substantiate that the design satisfies all relevant EASA or FAA regulations and customer requirements. Assist in preparation of test plans, provide technical support during testing, analyze test results and document conclusions. Provide technical leadership and on-the-job training to team of assigned engineers to enhance skill development of junior engineers. Coordinate all aspects of team activity to maximize productivity and meet schedule and cost targets. Conduct frequent coordination with customer for all stress related issues, typically attending weekly customer meetings. Track status of action items and deliverables to and from customer. Prepare and present stress data for design reviews and other technical meetings with customer. Directs work of others and acts as lead. Performs other duties as required, such as bid and proposal support. EDUCATION AND EXPERIENCES Requires a bachelor's degree in engineering and a minimum of 10+ years of experience in the Aerospace Industry or in a related field. Advanced working knowledge of NASTRAN/ANSYS and MS Office products. Basic working knowledge of CATIA V5. WHY CHOOSE SONACA NORTH AMERICA? We take care of our people. 401(k) retirement savings plan with a percentage company-match contribution Competitive wages Paid holidays Paid time off Medical, dental, vision, life, and accidental insurance Short-term disability Long-term disability Employee assistance plan - for access to counseling, consulting, and other community resources Wellness program Tuition assistance Subject to eligibility, terms, and conditions Annual Salary Range = $116,680 - $192,360 This base pay range is specific to residents of California, Colorado, Connecticut, New Jersey, New York, Nevada, Ohio, Rhode Island, and Washington, and any other state that may require such disclosure. Compensation in other geographies may vary. This is only a summary of the typical functions of the job, not an exhaustive or comprehensive list of all possible job responsibilities, tasks, and duties. The responsibilities, tasks, and duties may differ from those outlined in the job description and other duties, as assigned, may be required. This document does not create an employment contract. Employees of the Company are employed on an “at will” basis and may be terminated at any time. Sonaca North America is an equal employment opportunity employer. Consistent with applicable law, Sonaca North America provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company's online application system. If an applicant is unable to fully access the online application system, Sonaca North America will provide a reasonable accommodation. Applicants with disabilities may contact us at ************ for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for Sonaca North America‘s Human Resources Department. Sonaca North America will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials. Sonaca North America is an E-Verify Employer. Sonaca North America is an Equal Employment Opportunity/Disability/Veterans Employer NOTICE ON FRAUDULENT JOB OFFERS It has been brought to our attention that there have been instances of fraudulent job offers, purporting to be from Sonaca North America and/or its affiliates (“LMI Aerospace”). This type of fraud is normally carried out through online services such as false websites, or through fake e-mails or call from people claiming to be from the company. These persons offer fraudulent employment opportunities to applicants and often ask for sensitive personal and financial information. The fraudsters may also request recipients to provide personal information and/or to make payments as part of their fake recruiting process. Sonaca North America does not ask for any financial commitments from candidates as a pre-employment requirement and will always require candidates to formally apply for positions via the Careers Page or job postings. Sonaca North America has no responsibility for fraudulent offers and if you believe you have been a victim of a fraudulent job offer concerning Sonaca North America, please email ******************.

Description:Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. At Lockheed Martin, we apply our passion for purposeful innovation to keep people safe and solve the world's most complex challenges. We are seeking an Guidance, Navigation, and Control (GNC) Engineer who will specialize in Modeling and Simulation of complex technical solutions. What You Will Be Doing This person will join a highly skilled team of systems engineering technologists and algorithm developers supporting various contracts and IRADs within Missiles and Fire Control. Modeling & Simulation Engineer tasks include: * Design and documentation of model and simulation requirements and architecture * Develop, verify, and validate both complex models and simulations such as missile 6-degree-of-freedom simulations (6-DOF) and effects-based simulations * Evaluate system performance in complex scenarios and environments and verify system and subsystem level requirements * Perform critical studies, analyses, and test activities * Support ground and flight test efforts including Hardware-In-The-Loop (HWIL) activities * Support program reviews and technical interchange meetings with internal leadership and/or external customers By bringing together people that use their passion for purposeful innovation, at Lockheed Martin we keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel development and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. At Lockheed Martin, we place an emphasis on empowering our employees by fostering innovation, integrity, and exemplifying the epitome of corporate responsibility. Your Mission is Ours. Why Join Us We are committed to supporting your work-life balance and overall well-being, offering flexible scheduling options Learn more about Lockheed Martin's comprehensive benefits package here. Further Information About This Opportunity: This position is in Dallas. Discover more about our Dallas, Texas location. Relocation assistance is possible for this exciting position. Basic Qualifications: * Must have a BS degree or above in computer science, physics, computer engineering, mechanical engineering, electrical engineering, aerospace engineering, applied mathematics, or similar * U.S. Active DoD Secret clearance is required to be considered for this position therefore, you must be a US Citizen. * Must have demonstrated at least a foundational level of proficiency in C++ * Must have demonstrated at least an intermediate level of proficiency in Matlab or Python * Must have demonstrated the ability to perform one or more of the following Guidance, Navigation and Control (GNC) or Modeling and Simulation (M&S) assignments based on completed course work or professional experience: o Develop and analyze algorithms such as guidance, navigation, autopilot, inertial tracking, and servo control algorithms o Develop and/or verify/validate complex vehicle models and simulations such as missile 6-degree-of-freedom simulations o Demonstrate strong math skills in the areas of linear algebra, matrix math, statistics, trigonometry, and coordinate transformations. * Willing to work onsite in a classified area or lab environment Desired Skills: * Experience operating in Linux environments * Experience with Agile development * Ability to perform preflight system performance assessment and post flight verification analyses * Experience deploying algorithms that satisfy real-time performance requirements * Experience with DevOps/DevSecOps CI/CD pipelines and software version control such as Git * Strong written/verbal communication and organizational and interpersonal skills Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration. Clearance Level: Secret with Investigation or CV date within 5 years Other Important Information You Should Know Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings. Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits. Schedule for this Position: 4x10 hour day, 3 days off per week Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: Experienced Professional Business Unit: MISSILES AND FIRE CONTROL Relocation Available: Possible Career Area: Guidance, Navigation and Control Type: Full-Time Shift: First

Structural Integrity Associates, Inc. (SIA) is seeking a Senior Engineering Consultant to join our Nuclear business unit. The position will be based in one of our main offices: San Jose, CA; Centennial, CO; or Huntersville, NC. Remote work will also be considered. The ideal candidate will possess a background in mechanics/structural engineering and be responsible for engineering consulting work supporting the energy industry. The role will be to support project teams in the areas of finite element modeling, stress analysis, fatigue and fracture mechanics and related fields. The work environment is a dynamic team based on project requirements. Each project team is usually led by an industry expert and composed of engineers from various engineering disciplines such as stress analysis, fracture mechanics, structural dynamics, and material science. Primary Responsibilities: Stress analysis of power plant structures, pressure vessels, piping systems, rotating equipment and other power plant components using both classical and numerical methods Stress analyses using the guidelines in the ASME Boiler and Pressure Vessel Code Supporting and leading the FEA team Support fatigue management programs for various components Participation in design and repair projects of pressure vessel/piping components and Communication with clients to provide engineering problem solution, results and analyses Required Skills/Qualifications: BS or MS in Mechanical Engineering or similar discipline 5+ years (with MS) or 7+ years (with BS) of related engineering experience Advanced skills in ANSYS APDL/Workbench (ABAQUS is a plus) Advanced finite element analysis of vessel, piping, valves and other nuclear components Experience with mechanical, thermal, and modal analyses, and non-linear metallic material models Assist and lead in maintaining company standards related to finite element analysis Proficiency in Section III, Div 1 of ASME Boiler and Pressure Vessel Code (BPVC) Experience in Section III, Div 5 and Section XI, Div 1 & 2 of ASME BPVC is a plus Attend client, vendor, and internal team meetings Proficient in writing technical reports and communication skills Desired Skills/Qualifications: PE License Scripts and subroutines for finite element codes (e.g., python) Experience in computational fracture mechanics Experience in CFD simulations in ANSYS Project management skills Pay Range: The expected salary range for this role is $100,560-$168,240 in San Jose, CA; $85,840-$142,800 in Denver, CO; and $78,480-$131,760 in Charlotte, NC. Exact pay will be commensurate with experience. Export Control Notice: Certain positions at SIA may require access to information and technology which is subject to Export Administration Regulations 15 CFR 730-774, including those of the US Department of Energy (DOE) in 10 CFR 810 and Nuclear Regulatory Commission (NRC) 10 CFR Part 110. Hiring decisions for such positions must comply with these regulations and may result in SIA limiting its consideration of foreign nationals who are citizens of countries that are not on the DOE's Generally Authorized Destinations List: *************************************************************************************************** About Us: SIA is an engineering consulting firm serving various industries including Nuclear Power, Energy Services, Pipeline Integrity, and Critical Infrastructure. Join a team of internationally recognized experts in a culture based on knowledge, excellence, and respect for one another. Our employees are members of a distinct community of internationally respected professionals committed to quality, engineering innovation and a shared goal of building a safer world. Why Work at SIA? SIA offers a competitive salary and performance-based bonus program. Our retirement benefits include a Traditional 401k, Roth 401k, and an employer match. To help employees maintain a work-life balance, SIA also offers various paid time off including vacation, floating holidays, sick time, and parental leave. Our employees also enjoy a comprehensive benefits program that includes the following: Medical, dental, and vision insurance Life Insurance and AD&D Short-term and long-term disability Health Savings Account with employer contribution Flexible Spending Account for health care and dependent care ID theft protection and credit monitoring Structural Integrity Associates, Inc. is an equal opportunity employer. ***************** SIA does not welcome third-party recruiters, employment agencies, headhunters, etc. Please do not reach out to SIA employees requesting a call, sit down, meeting, or email response.

WHO ARE WE Sonaca North America is driven by a passion for innovation and a commitment to excellence. As a leading provider of aerospace and defense solutions, we are dedicated to making air and space travel safe and sustainable. We have 13 locations across North America and our engineering expertise and operational excellence set us apart from the competition. Since the beginning in 1948, we have a proven track record of delivering high-quality products and services that are reliable, safe, and efficient. Our team of experts is dedicated to staying ahead of the curve in the aerospace and defense industry, utilizing the latest technologies and processes to ensure that we deliver the best possible solutions to our customers. POSITION SUMMARY We are currently seeking a Stress Engineer II. Under the direction of the Engineering manager, supervisor or lead this position will work with the Engineering team to ensure successful integration by providing stress analysis on engineering designs for components, systems and products using mathematical formulas and computer-aided engineering (CAE) systems. The Stress Engineer II will work both independently as well as part of a team to complete specific projects related to both commercial and military aircraft components to determine stress requirements of a product. ESSENTIAL JOB RESPONSIBILITIES The Stress Engineer II will work with a low level of supervision and must rely on experience and judgment to plan and accomplish goals while performing a variety of complex tasks in the following areas: Reviews designs and provides preliminary strength/stress assessments. Analyzes engineering designs, schematics, and customer specifications to determine stress requirements for a particular product. Formulates mathematical analysis or finite element model of product. Analyze ability of product to withstand stress imposed by conditions such as temperature, loads, motion, and vibration using mathematical formulas and computer simulation. Prepare preliminary stress analysis reports and provide information to supervisor or lead. Capable of airframe structural analysis for static and fatigue stresses. Perform structural analysis on conceptual layouts as well as detail components. Consult with Design Engineer to assess design modifications of product based on results of stress analysis. Will focus primarily on existing products and processes. Ability to perform classical hand stress calculations, finite element analysis utilizing finite element software such as NASTRAN or ANSYS. Participates with other staff to contribute to project completion. Performs other duties as required. EDUCATION AND EXPERIENCES Requires a bachelor's degree in engineering and a minimum of 5-9 years of experience in the Aerospace Industry or in a related field. Intermediate knowledge of finite element modeling, and familiarity with MS Office products. Basic knowledge of CATIA V5 WHY CHOOSE SONACA NORTH AMERICA? We take care of our people. 401(k) retirement savings plan with a percentage company-match contribution Competitive wages Paid holidays Paid time off Medical, dental, vision, life, and accidental insurance Short-term disability Long-term disability Employee assistance plan - for access to counseling, consulting, and other community resources Wellness program Tuition assistance Subject to eligibility, terms, and conditions Annual Salary Range = $103,000 - $170,580 This base pay range is specific to residents of California, Colorado, Connecticut, New Jersey, New York, Nevada, Ohio, Rhode Island, and Washington, and any other state that may require such disclosure. Compensation in other geographies may vary. This is only a summary of the typical functions of the job, not an exhaustive or comprehensive list of all possible job responsibilities, tasks, and duties. The responsibilities, tasks, and duties may differ from those outlined in the job description and other duties, as assigned, may be required. This document does not create an employment contract. Employees of the Company are employed on an “at will” basis and may be terminated at any time. Sonaca North America is an equal employment opportunity employer. Consistent with applicable law, Sonaca North America provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company's online application system. If an applicant is unable to fully access the online application system, Sonaca North America will provide a reasonable accommodation. Applicants with disabilities may contact us at ************ for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for Sonaca North America‘s Human Resources Department. Sonaca North America will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials. Sonaca North America is an E-Verify Employer. Sonaca North America is an Equal Employment Opportunity/Disability/Veterans Employer NOTICE ON FRAUDULENT JOB OFFERS It has been brought to our attention that there have been instances of fraudulent job offers, purporting to be from Sonaca North America and/or its affiliates (“LMI Aerospace”). This type of fraud is normally carried out through online services such as false websites, or through fake e-mails or call from people claiming to be from the company. These persons offer fraudulent employment opportunities to applicants and often ask for sensitive personal and financial information. The fraudsters may also request recipients to provide personal information and/or to make payments as part of their fake recruiting process. Sonaca North America does not ask for any financial commitments from candidates as a pre-employment requirement and will always require candidates to formally apply for positions via the Careers Page or job postings. Sonaca North America has no responsibility for fraudulent offers and if you believe you have been a victim of a fraudulent job offer concerning Sonaca North America, please email ******************.

Description:Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. At Lockheed Martin, we apply our passion for purposeful innovation to keep people safe and solve the world's most complex challenges. We are seeking an experienced Guidance, Navigation, and Control (GNC) Engineer who will specialize in Modeling and Simulation (M&S) of complex technical solutions to join our team in sunny Grand Prairie, Texas!! What You Will Be Doing This person will join a highly skilled team of systems engineering technologists and algorithm developers supporting various contracts and IRADs within Missiles and Fire Control. Modeling & Simulation Engineer tasks include: * Design and documentation of model and simulation requirements and architecture * Develop, verify, and validate both complex models and simulations such as missile 6-degree-of-freedom simulations (6-DOF) and effects-based simulations * Evaluate system performance in complex scenarios and environments and verify system and subsystem level requirements * Perform critical studies, analyses, and test activities * Support ground and flight test efforts including Hardware-In-The-Loop (HWIL) activities * Support program reviews and technical interchange meetings with internal leadership and/or external customers. The candidate must have experience in weapon system and/or sensor modeling, both for the items to be modeled, and the synthetic modeled environments used to stimulate the simulated hardware. The M&S Engineer must be able to work with subsystem and software engineers to integrate MATLAB models, C++ models, and actual tactical software into the simulations. The M&S Engineer must be proficient in C++ and MATLAB. The candidate must have good communication skills and must be comfortable working in a collaborative environment. Why Join Us We are committed to supporting your work-life balance and overall well-being, offering flexible scheduling options Learn more about Lockheed Martin's comprehensive benefits package here. Further Information About This Opportunity: This position is in Dallas. Discover more about our Dallas, Texas location. Relocation assistance is possible for this exciting position. #mfcnews Basic Qualifications: * Must have a college degree in aerospace engineering, computer science, physics, computer engineering, mechanical engineering, electrical engineering, applied mathematics, or similar field * Active Secret Security Clearance. * Willing to work onsite in a classified area or lab environment * Professionally demonstrated proficiency in C++ and Matlab * Professionally demonstrated the ability to develop and/or verify/validate complex vehicle models and simulations such as missile 6-degree-of-freedom simulations * Professionally demonstrated strong math skills in the areas of linear algebra, matrix math, statistics, trigonometry, and coordinate transformations * Strong written/verbal communication and organizational and interpersonal skills Desired Skills: * An active U.S. DOD Secret clearance with an investigation date in the last 5 years * Advanced proficiency in C++ * Experience operating in Linux environments * Experience with Agile development * Experience performing one or more of the following technical GNC assignments: o Develop and analyze algorithms such as guidance, navigation, autopilot, inertial tracking, and servo control algorithms o Develop and/or verify/validate complex vehicle models and simulations such as missile 6-degree-of-freedom simulations o Demonstrated strong math skills in the areas of linear algebra, matrix math, statistics, trigonometry, and coordinate transformations o Develop, verify and validate complex Radio Frequency sensor models o Ability to perform preflight system performance assessment and post flight verification analyses * Experience deploying algorithms that satisfy real-time performance requirements * Experience with DevOps/DevSecOps CI/CD pipelines and software version control such as Git Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration. Clearance Level: Secret Other Important Information You Should Know Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings. Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits. Schedule for this Position: 4x10 hour day, 3 days off per week Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: Experienced Professional Business Unit: MISSILES AND FIRE CONTROL Relocation Available: Possible Career Area: Guidance, Navigation and Control Type: Full-Time Shift: First

**Description:** By bringing together people that use their passion for purposeful innovation, at Lockheed Martin we keep people safe and solve the world's most complex challenges\. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work\. With our employees as our priority, we provide diverse career opportunities designed to propel development and boost agility\. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work\. At Lockheed Martin, we place an emphasis on empowering our employees by fostering innovation, integrity, and exemplifying the epitome of corporate responsibility\. Your Mission is Ours\. At Lockheed Martin, we apply our passion for purposeful innovation to keep people safe and solve the world's most complex challenges\. **What You Will Be Doing** We are seeking an Guidance, Navigation, and Control \(GNC\) Engineer who will specialize in Modeling and Simulation of complex technical solutions\. This person will join a highly skilled team of systems engineering technologists and algorithm developers supporting various contracts and IRADs within Missiles and Fire Control\. Modeling & Simulation Engineer tasks include: - Design and documentation of model and simulation requirements and architecture - Develop, verify, and validate both complex models and simulations such as missile 6\-degree\-of\-freedom simulations \(6\-DOF\) and effects\-based simulations - Evaluate system performance in complex scenarios and environments and verify system and subsystem level requirements - Perform critical studies, analyses, and test activities - Support ground and flight test efforts including Hardware\-In\-The\-Loop \(HWIL\) activities - Support program reviews and technical interchange meetings with internal leadership and/or external customers **Why Join Us** We are committed to supporting your work\-life balance and overall well\-being, offering flexible scheduling options Learn more about Lockheed Martin's comprehensive benefits package here\. **Further Information About This Opportunity:** This position is in Dallas\. Discover more about our Dallas, Texas location\. Relocation assistance is possible for this exciting position\. **Basic Qualifications:** - Post Secondary STEM degree with 1\+ years of relevant experience\. - Must be a US Citizen as an Interim Clearance is required to start\. - Candidate must have fundamental proficiency in C\+\+ - Proficient in either MATLAB or Python - Candidate must have demonstrated the ability to perform one or more of the following Guidance, Navigation and Control \(GNC\) or Modeling and Simulation \(M&S\) assignments based on completed course work or professional experience: o Develop and analyze algorithms such as guidance, navigation, autopilot, inertial tracking, and servo control algorithms o Develop and/or verify/validate complex vehicle models and simulations such as missile 6\-degree\-of\-freedom simulations o Demonstrate strong math skills in the areas of linear algebra, matrix math, statistics, trigonometry, and coordinate transformations **Desired Skills:** - Proficiency with Python and Linux - Experience with Agile development - Experience with DevOps/DevSecOps CI/CD pipelines and software version control such as Git - Strong written/verbal communication and organizational and interpersonal skills \*\*Active Secret Clearance **Security Clearance Statement:** This position requires a government security clearance, you must be a US Citizen for consideration\. **Clearance Level:** Secret **Other Important Information You Should Know** **Expression of Interest:** By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match\. Should this match be identified you may be contacted for this and future openings\. **Ability to Work Remotely:** Onsite Full\-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility\. **Work Schedules:** Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees\. Schedules range from standard 40 hours over a five day work week while others may be condensed\. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits\. **Schedule for this Position:** 4x10 hour day, 3 days off per week **Lockheed Martin is an equal opportunity employer\. Qualified candidates will be considered without regard to legally protected characteristics\.** **The application window will close in 90 days; applicants are encouraged to apply within 5 \- 30 days of the requisition posting date in order to receive optimal consideration\.** At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges\. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work\. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility\. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work\. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility\. If this sounds like a culture you connect with, you're invited to apply for this role\. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs , and apply for roles that align with your qualifications\. **Experience Level:** Experienced Professional **Business Unit:** MISSILES AND FIRE CONTROL **Relocation Available:** Possible **Career Area:** Guidance, Navigation and Control **Type:** Full\-Time **Shift:** First

**Description:** Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services\. At Lockheed Martin, we apply our passion for purposeful innovation to keep people safe and solve the world's most complex challenges\. We are seeking an experienced Guidance, Navigation, and Control \(GNC\) Engineer who will specialize in Modeling and Simulation \(M&S\) of complex technical solutions to join our team in sunny Grand Prairie, Texas\!\! **What You Will Be Doing** This person will join a highly skilled team of systems engineering technologists and algorithm developers supporting various contracts and IRADs within Missiles and Fire Control\. Modeling & Simulation Engineer tasks include: - Design and documentation of model and simulation requirements and architecture - Develop, verify, and validate both complex models and simulations such as missile 6\-degree\-of\-freedom simulations \(6\-DOF\) and effects\-based simulations - Evaluate system performance in complex scenarios and environments and verify system and subsystem level requirements - Perform critical studies, analyses, and test activities - Support ground and flight test efforts including Hardware\-In\-The\-Loop \(HWIL\) activities - Support program reviews and technical interchange meetings with internal leadership and/or external customers\. The candidate must have experience in weapon system and/or sensor modeling, both for the items to be modeled, and the synthetic modeled environments used to stimulate the simulated hardware\. The M&S Engineer must be able to work with subsystem and software engineers to integrate MATLAB models, C\+\+ models, and actual tactical software into the simulations\. The M&S Engineer must be proficient in C\+\+ and MATLAB\. The candidate must have good communication skills and must be comfortable working in a collaborative environment\. **Why Join Us** We are committed to supporting your work\-life balance and overall well\-being, offering flexible scheduling options Learn more about Lockheed Martin's comprehensive benefits package here\. **Further Information About This Opportunity:** This position is in Dallas\. Discover more about our Dallas, Texas location\. Relocation assistance is possible for this exciting position\. \#mfcnews **Basic Qualifications:** Basic Qualifications : - Must have a college degree in aerospace engineering, computer science, physics, computer engineering, mechanical engineering, electrical engineering, applied mathematics, or similar field - Experience modeling complex RF and IR sensor systems - Active Secret Security Clearance\. - Willing to work onsite in a classified area or lab environment - Professionally demonstrated proficiency in C\+\+ and Matlab - Professionally demonstrated the ability to develop and/or verify/validate complex vehicle models and simulations such as missile 6\-degree\-of\-freedom simulations - Strong written/verbal communication and organizational and interpersonal skills **Desired Skills:** - An active U\.S\. DOD Secret clearance with an investigation date in the last 5 years - Advanced proficiency in C\+\+ - Experience operating in Linux environments - Experience with Agile development - Experience deploying algorithms and models that satisfy real\-time performance requirements - Experience with DevOps/DevSecOps CI/CD pipelines and software version control such as Git **Security Clearance Statement:** This position requires a government security clearance, you must be a US Citizen for consideration\. **Clearance Level:** Secret **Other Important Information You Should Know** **Expression of Interest:** By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match\. Should this match be identified you may be contacted for this and future openings\. **Ability to Work Remotely:** Part\-time Remote Telework: The employee selected for this position will work part of their work schedule remotely and part of their work schedule at a designated Lockheed Martin facility\. The specific weekly schedule will be discussed during the hiring process\. **Work Schedules:** Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees\. Schedules range from standard 40 hours over a five day work week while others may be condensed\. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits\. **Schedule for this Position:** 4x10 hour day, 3 days off per week **Lockheed Martin is an equal opportunity employer\. Qualified candidates will be considered without regard to legally protected characteristics\.** **The application window will close in 90 days; applicants are encouraged to apply within 5 \- 30 days of the requisition posting date in order to receive optimal consideration\.** At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges\. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work\. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility\. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work\. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility\. If this sounds like a culture you connect with, you're invited to apply for this role\. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs , and apply for roles that align with your qualifications\. **Experience Level:** Experienced Professional **Business Unit:** MISSILES AND FIRE CONTROL **Relocation Available:** Possible **Career Area:** Guidance, Navigation and Control **Type:** Full\-Time **Shift:** First