Balfour Beatty plc jobs in Fort Lauderdale, FL

Division: Miami Main Minimum Years Experience: Travel Involved: Job Type: RegularJob Classification: TradeEducation:Job Family:TradeCompensation:Non-Union Trade Perform tasks involving physical labor at construction projects jobsites. Essential Duties & Key Responsibilities: * Review jobsite needs with Foreman and Superintendents to fully comprehend scopes of work per plans and specifications to complete job assignment. * Perform physical labor to assist with jobsite clean-up, rough carpentry, site logistics, fencing, deck and platform building, protection systems, construction waste areas, and additional job assignments as directed. * Inventory supplies and give supply orders to Foreman for re-stocking. * Ensure Trade employees, subcontractors, and vendors to comply with Turner standards, safety codes, regulations, and jobsite security. * Display high level of teamwork, integrity, commitment, and leadership in daily operations. * Fully understand work instructions, project signage, and safety instructions from tool and equipment manufacturers and prepare and inspect tools prior use to ensure safe and working condition. * Participate in daily Pre-Task Plans, follow safety expectations for operation of equipment and tools, select appropriate equipment for performing work, adhere to safety protocols to perform work, and wear appropriate PPE (Personal Protection Equipment). * Perform selected demolition. * Participate in activities of subcontractors and suppliers. * Review project perimeter for security and cleanliness daily, participate in end of day clean-up activities. * Perform fire watch duties and construct scaffolding as needed. * Manage dumpster vendor schedule and maintain dumpster areas for cleanliness and organization. * Perform as spotter for heavy equipment operators. * Ensure security of equipment and work area while conducting operations. * Identify, communicate, and escalate problems and issues to supervisor for immediate resolution. * Track production of completed tasks. * Assist other craft workers in their trades as directed. * Maintain positive working relationships with customers, contractors, suppliers and other employees. * Other activities, duties, and responsibilities as assigned. Qualifications: * Minimum of 1 year of general construction industry experience required or equivalent combination of education, training, and experience * Proficient knowledge of materials, methods, and tools involved in construction or repair of buildings or other structures, foundations, and framing * Ability to understand, and interpret construction contract documents, drawings (e.g., shop, structural, blueprints, sketches, and/or building plans), specifications, scopes of work, vendor tags, and project schedule to determine dimensions and materials to execute work activities * Knowledge of machines and tools for uses, repair, maintenance * Proficient use of related tools to complete work assignments * Knowledge of and able to apply arithmetic and basic geometry to work tasks * Ability to measure, read, and convey lengths with ruler or tape with high degree of accuracy * Able to think critically and use good judgment to solve problems * Ability to take direction, work independently with minimal supervision, and in team environment * Ability to apply active listening skills, ask clarifying questions, and complete assignments as directed * Clear and professional verbal and written communication skills and engage with all levels of teams, clients, business partners, and management * Reliable transportation required * Ability to travel using various modes (e.g., automobile, train, air) and accommodate night and weekend work as needed Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Performance requires vision abilities including close, distance, color, peripheral, depth perception, and focus, and hearing abilities with or without the use of an aide. Performance requires physical ability to navigate work areas under construction, climb permanent and temporary stairs, passenger use of construction personnel hoists, and climb ladders, along with the following: Constantly: Standing, walking, combined standing/walking, lifting/lowering/carrying weights under 25 lbs., reaching below shoulder height, bending/twisting neck, bending at waist (forward & sideways), balancing pushing/pulling, repetitive motion, hand/wrist flexion extension, and exposures to noise/dust/chemicals. Frequently: Lifting/lowering/carrying weights 25-50 lbs., reaching above shoulder height, squatting, kneeling, climbing, and working on heights. Occasionally: Sitting, crawling, confined space hazards, and lifting/lowering/carrying weights over 50 lbs. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works on-site at the construction site where the employee is exposed to moving mechanical parts, high precarious places, fumes or airborne particles, outside weather conditions, and risk of electric shock. The noise in the work environment is usually moderate to loud. The employee is required to work in compliance with company safety policies, procedures, and applicable laws. Turner is an Equal Opportunity Employer - race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other characteristics protected by applicable law.

Category Construction Operations Type Intern What It Takes Open to undergraduate students interested in gaining hands-on practical experience in the construction field. Qualified applicants will assist project teams in managing construction projects/ including all phases from bidding to final completion. * Assignments include office and job site; relocation to a remote sites may be required. * Transportation is required. * Work periods are 10-12 weeks; 40 hours/week. * Housing may be provided in certain situations. Intern Job Description Reporting Relationship: Depending on the work assignment, interns will report to a project manager, superintendent, project engineer or field engineer. You may be assigned to the office, jobsite or mix of both. Tasks Assigned: You will be learning the engineering and technical aspects of the project both in the field and in the office. Your experience will include some or all the following: * Quantity take-off * Layout * Preconstruction/as-built surveys * Shop drawing review/approval & maintenance of log * Submittal review/approval & maintenance of log * Request for information (RFI) review/submission & maintenance of log * Responding to subcontractor RFIs * Interfacing with subcontractors & suppliers * Attending weekly progress meetings * Assisting with coordinating the work between the owner, architect & subcontractors * Assisting during the bid process * Assist with reviewing construction documents & specifications * Assisting with reviewing all document revisions & clarifications * Assisting with maintaining field record * Assisting with estimates/budgets/value engineering/constructability surveys Assist with writing contracts & purchase orders * Assisting with preparing billings to owner & submitting change orders * Assisting with approval of invoices * Assisting with ordering & expediting materials * Assisting with scheduling & updates * Assisting with quality control & safety * Assisting with settling contracts * Assisting with permit process * Assisting with performing costing, scheduling, estimating & project management * Punchlist & project closeout * Cooperating & working with field project management * And any other duties that may be assigned Required Skills Technical Capabilities You should be familiar with the following software: Primavera, Microsoft Word, Microsoft Excel, Microsoft Access, Microsoft PowerPoint, Microsoft Outlook, Microsoft Exchange, etc. The Whiting-Turner Contracting Company is an Equal Opportunity Employer, including the disabled and veterans.

Division: Miami Main Minimum Years Experience: Travel Involved: Job Type: RegularJob Classification: ExperiencedEducation:Job Family:Environmental Health and SafetyCompensation:Salaried Exempt Position Description: Partner with Environmental Health & Safety (EH&S) and project teams to enforce site compliance with company, EH&S programs, policies, procedures, and regulatory requirements on a single construction project within business unit's geographic area. Lead training of safe work practices to educate and inform and guide project teams on management of environmental and hazardous materials reports and conditions. Essential Duties & Key Responsibilities: * Lead, direct, and enforce Environmental Health & Safety (EH&S) on single construction project, based on safety staffing requirements as defined by Headquarters (HQ) EH&S policy. * Manage time and resource allocation and provide safety leadership to assigned project. * Assess project Safety practices and known and potential safety related exposures, develop and implement action plans to mitigate risks, and drive changes to improve project team safety awareness and activities. * Communicate requirements for improving performance to project leadership and team for adoption and adherence to changes, using project specific-safety standards, best management practices, and EH&S policies and procedures. * Understand site safety trends and participate in reducing Project Incident Rates by meeting or exceeding established Business Unit (BU) goals and manage regulatory exposures to zero citations. * Develop training for project site-specific needs to educate project management, employees, subcontractors, and Turner Trade employees on Environmental Health & Safety (EH&S) programs, policies, and procedures and provide training on safe work practices to encourage and enforce adoption and adherence. * Promote safe work practices and safe working conditions in accordance with company and Environmental Health & Safety (EH&S) policies, Federal, State, and Local regulations, and owner contractual requirements. * Maintain and enhance working relationships with project staff and subcontractor Safety Representatives. * Develop and enforce project Safety Program and related policies and procedures. * Identify unsafe actions and conditions and engage with project team to implement immediate corrective actions in accordance with Turner, Federal, State and Local regulations and owner requirements. * Develop accountability model for project team to ensure pre-planning for activities and tasks for subcontractors and trades. * Review subcontractor safety programs for completeness and compliance with company and EH&S policies, Federal, State, and Local regulations, and owner contractual requirements. * Review quality of Pre-Task Plans (PTPs) for project subcontractors and Trades based on contractual requirements. * Hold Preconstruction planning meetings with subcontractors to review site safety program and job hazard analysis for their scope of work and to establish and review risk mitigation plans. * Develop safety action items for Preconstruction meetings and verify subcontractors conduct training as per OSHA standards. * Conduct effective worker orientation program for new employees; administer and record participation. * Collaborate with project leadership to create project specific safety reports, assess metrics, and make recommendations for improvement over baseline. * Ensure timely log of subcontractors' toolbox safety meetings. * Conduct and review project team's safety audits, assess recommended corrective actions, and issue reports of violations and/or unsafe practices for immediate resolution. * Other activities, duties, and responsibilities as assigned. Qualifications: * Bachelor's Degree from accredited degree program in Occupational Safety & Health, Engineering, or related field of study, and minimum of 4 years of related construction safety experience, or equivalent combination of education, training, and experience * Construction Health Safety Technician (CHST) certification required or within 2 years of appointment * Completed OSHA 30-hour training and maintain current First Aid/CPR/BBP and AED certifications * Knowledgeable of Federal, State, and local Environmental Health & Safety regulations * Working knowledge and consistent application of safety and environmental principles and techniques * Ability to identify known and potential safety related exposures and lead implementation of corrective actions * Familiar with general construction operations * Demonstrate elements of leadership from within, teamwork, and interpersonal skills to build teams and professional relationships * Professional verbal and written communication skills and effective presentation delivery skills * Exceptional organizational skills with high attention to detail * Analytical thinking, good judgment, and complex problem-solving skills * Travel required, access to reliable transportation required Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Performance of the required duties require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction. While performing the duties of this job, the employee is frequently required to sit, climb, balance, stoop, kneel, crouch, crawl, use hands to finger, handle or feel objects, tools, or controls, and reach with hands, talk, and hear. The employee frequently views a computer monitor and frequently uses a computer keyboard. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. The employee is regularly required to be mobile, and the employee occasionally travels both short and long distances via a variety of conveyances. The employee must regularly lift and/or move up to 15 pounds and occasionally lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works at construction work sites where the employee is exposed to moving mechanical parts, high precarious places, fumes, or airborne particles, outside weather conditions, and risk of electrical shock. The noise in the work environment is usually moderate to loud. While performing the duties of this job, the employee occasionally works in an office setting. The noise in the work environment is usually quiet to moderate in an office setting. The employee is required to work in compliance with company safety policies, procedures, and applicable laws. Turner is an Equal Opportunity Employer - race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other characteristics protected by applicable law.

Next 150 Construction, a wholly owned subsidiary of Gilbane Building Company, is seeking an Equipment Manager - East to oversee the East Coast from Massachusetts to Florida. The Equipment Manager will manage the entire operation for assigned area in support of the Equipment Operations business for Next 150 Construction. Responsibilities * Possess a strong ability to establish operational, financial, and personnel objectives & budgets for assigned area. - Supervise Next 150 personnel as assigned. Personnel may include warehouse workers, administration, and/or equipment specialists. - Lead the Next 150 equipment team to achieve goals, analyze discrepancies, and initiate corrective actions as needed. - Partner with internal and external stake holders to establish key performance indicators for the Next 150 equipment business. - Design, implement, and modify maintenance programs in accordance with manufacturer guidelines and ensure proper execution in program rollout and modifications. - Overall accountability for rate schedules, customer negotiations, and vendor management. - Prioritize and delegate work focus for team members in assigned area. - Support the team by training, challenging, and leading the team in order to build career opportunities for team members. - Conduct reviews (performance, financial, operational, etc.) with team members, vendors, and customers. Including interviews, performance improvement plans, business reviews, etc. - Administer presentations, as needed, to internal and external stake holders. - Assist with the Capital Expenditure (CAPEX) process to procure equipment, fleet, warehouses, etc. - Participate in the continuous improvement plan by identifying opportunities in the current process, reviewing suggested improvements, and presenting corrective action plan to leadership. - Review and identify opportunities to expand on business offerings and execute the rollout/implementation process. - Responsible for contract negotiations with internal and external parties to agree on fair terms and conditions (vendors, subcontractors, customers, etc). - Participate in and help support safety activities and trainings. - All other responsibilities as assigned. Qualifications * Bachelor's degree in Supply Chain Management, Business, or related field (preferred) - 7+ years of experience in equipment rental, warehouse, or construction - 3+ years of experience managing equipment rental, warehouse, or construction operations along with management of direct reports (required) - Experience with financial management, budgeting, forecasting - Or equivalent combination of education and experience KNOWLEDGE, SKILLS & ABILITIES - Excellent in MS Office Suite, particularly Excel - Effective interpersonal, oral, and written communication skills - Ability to work autonomously and lead a team, internally and externally - Expert problem-solving skills - Ability to multitask with strong attention to detail - Thorough knowledge of procurement and asset management software - Strong financial planning and budgeting - Master at identifying construction equipment and materials and their intended use - Expert knowledge in logistics operations including equipment, warehouse, storage, and safety from start to finish WORKING ENVIRONMENT - Must be able to lift up to 25 pounds - Travel: as needed (~30%) - Normal office environment, and may be exposed temporarily to extreme weather - Frequent activities: sitting, standing, walking, viewing computer screens - Occasional activities: bending, climbing, reaching above shoulder, pushing, pulling Salary to be determined based on factors such as geographic location, skills, education, and/or experience of the applicant, as well as the internal equity and alignment with the team. The pay ranges from $108,000.00-$190,000.00 plus benefits and retirement program. Next 150 Construction Services has an unwavering focus on safety, the environment and caring about everyone involved in our work. Qualified applicants who are offered a position must pass a pre-employment substance abuse test. Next 150 Construction Services is not accepting unsolicited resumes from third party recruiters at this time. Next 150 Construction Services is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, color, national origin, race, religion, sex, sexual orientation, gender identity, protected veteran status, or disability status.

Division: Orlando Minimum Years Experience: Travel Involved: 20-30% Job Type: RegularJob Classification: ExperiencedEducation:Job Family:ConstructionCompensation:Salaried Exempt If you picture yourself doing great things that make a difference in the lives of others, Turner is the place to be. Turner Construction is an industry leading commercial construction general contractor with a 120 year history spanning iconic projects around the globe, including 10 of the world's 100 tallest buildings. Turner is committed to sustaining a diverse, equitable, and inclusive environment where everyone feels connected, sees themselves represented at all levels of the company, and feels supported to reach their ultimate potential. Turner builds some of the most ambitious projects in the world. The technical expertise of our people makes us a recognized leader in many markets. Our projects are well known. Our people set us apart. We inspire greatness. Can you picture yourself at Turner? If so, apply and let's do great things together! Position Description: Prepare detailed estimates for the project based on the construction drawings and specifications. Communicate bids and scopes of work. Reports to: Lead Estimator, Senior Estimator, or Preconstruction Manager Essential Duties & Responsibilities*: In the areas assigned: * Prepare a detailed estimate by completing quantity take-offs, analysis, estimate input, and studies for all items incorporated in the assigned scope. * Prepare and assemble bids and proposals for different contract types (Lump Sum, Guaranteed Maximum Price (GMP), Cost Plus, etc.) * Lead the document management for the project, including receiving drawings and specifications, providing the proper file structure and distribution to all parties. * Serve as liaison with subcontractors, design team (architects, engineers, consultants) and client. Point of contact for managing assigned trade subcontractors and distributing information. * Support constructability reviews through communication with the project team, designers, and subcontractor market. * Develop a value analysis study by defining alternatives to the proposed scope that are more cost-efficient. * Responsible for understanding all factors required for a comprehensive trade package scope including contract documents, site logistics, schedule, coordination, means and methods. * Coordinate with Operations staff and fellow estimators to ensure that General Conditions and General Requirement items are properly addressed in the estimate. * Prepare scope requisitions for assigned trades as required; coordinate with project team to eliminate scope gaps and overlaps. * Prepare comparison analysis to previous estimate for assigned scope. * Obtain and evaluate subcontractor proposals relative to their scope of work. Document information into Bid Recording Sheet, organize and participate in Post Bid Review. * Manage action items from Post Bid and finalize subcontract scope. Make recommendations to the Project Lead for award. * Supervise Assistant Estimators and/or Interns as assigned. * All other duties as assigned. #LI-NM1 Qualifications: Bachelor's degree plus a minimum of two years' related experience or an equivalent combination of education, training and/or experience. Proven written and verbal communication abilities; proficiency with computer applications, including Microsoft Office Suite. Ability to read, understand and interpret contract documents, drawings, specifications, scopes of work and project schedule. Demonstrated leadership and interpersonal skills. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Performance of the required duties will require physical ability to occasionally climb permanent and temporary stairs, climb ladders, negotiate work areas under construction, balance, stoop, kneel, crouch, or crawl. Occasionally requires passenger use of construction personnel hoists. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. Performing this job regularly requires us of hands to find, handle, or feel objects, tools or controls, sit talk hear and stand. Employee must occasionally lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may work in an office or on-site at the construction work site. In the office environment, the noise is usually quite to moderate. In the on-site setting, the employee is regularly exposed to moving mechanical parts; high precarious places, fumes or airborne particles; outside weather conditions and risk of electrical shock. The noise in this work environment is usually moderate to very loud. * May perform other duties as necessary or assigned. Turner is an Equal Opportunity Employer Minorities/Females/Veterans/Individuals with Disabilities/Sexual Orientation/Gender Identity. VEVRAA Federal Contractor Turner is an Affirmative Action and Equal Opportunity Employer - minorities/females/veterans/individuals with disabilities/sexual orientation/gender identity. VEVRAA Federal Contractor

Category Construction Operations Type Full-Time/Regular Whiting-Turner is looking for a self-motivated, energetic, detailed oriented, innovative, tech savvy person to join our internal Virtual Design & Construction (VDC) team. Job Responsibilities include: Qualified candidates should: * Understand building construction, engineering, and/or architecture. * Have on the job or class experience with BIM software programs and technology. * Thrive in a team environment both contributing to larger projects and producing independent work. * Have an innately curious, forward-thinking personality to push innovative ideas in all aspects of daily tasks. * Be able to multi-task and deliver parallel successful products. Typical Daily tasks include: * Creating virtual simulations to validate and improve site logistics, safety concerns, building sequencing, scheduling, and VR experiences. * Manage 3D coordination activities with operation teams from project kickoff through closeout. * Perform preconstruction model tasks - quality verifications, schedule validations, constructability reviews, and virtual mock-up production. * Drive research and development of new software, hardware, and technology to optimize the team's execution and overall project quality. Required Skills Skill Set: Software proficiency required: * General computing skills * SketchUp * CAD * Revit * Navisworks * Rendering software (i.e. Lumion) Other required skills: * Able to read drawings and understand specifications, building codes, and other technical data. * Familiar with MEPF system design. * Have excellent written and oral communication. * Ability to work well with cross-discipline teams. * Data analytics, visual programming, and VR/AR experience. Education/Experience * Bachelors degree with preference given to Architectural, Civil Engineering, or Construction Management related degrees or Associate degree in a VDC/BIM technical concentration with 3-5 years of experience. * BIM software, hardware, and technology knowledge. The Whiting-Turner Contracting Company is an Equal Opportunity Employer, including the disabled and veterans.

Are you looking for a highly rewarding opportunity that provides extensive career growth opportunity? Gilbane is seeking a Safety Professional III to support all safety efforts on a single project with >250 workforce or high hazard work. Who are we? As a Top-10 ENR Contractor, Gilbane is a family-owned business with 45 offices that has been shaping communities since 1870. Consistently recognized as one of the most reputable construction management firms in the country, Gilbane is committed to delivering projects safely and on-time. You will have the opportunity to build schools, labs, hospitals, corporate offices, sports arenas and more! We are dedicated to building a diverse, inclusive and authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Who are you? You are someone who acts inclusively, showing empathy and treating others with respect and dignity in order to uphold Gilbane's core value of Caring and “People First” workplace culture. You seek to listen in order to understand and can convey information clearly. You're a strong problem solver who can identify, prioritize, and implement alternatives for solutions, and you demonstrate adaptability by collaborating with others and supporting team members to achieve excellence. A self-starter who shows passion, commitment, and ownership all while delivering on business outcomes and driving results. You're someone who identifies opportunities for new and improved ways of doing things that result in value-add solutions. Your core values match Gilbane's: Integrity, Caring, Teamwork, Toughmindedness, Dedication to Excellence, Discipline, Loyalty, and Entrepreneurship. What's in it for you? Gilbane offers employees multi-dimensional training opportunities through a number of resources. While managing your responsibilities to projects, you will be able to enroll in trainings through our award-winning Gilbane University to build leadership and technical skills. In addition, you would work with an experienced team which provides you with the opportunity to learn new industry skills every day. You will protect and promote the interests of both Gilbane and the client in all matters as well as demonstrating the personal characteristics of a developing leader. Responsibilities Promotes the Gilbane Cares safety culture Ensures contractor activities are preplanned for safety through scope review, preconstruction meetings, JHA review, STAs, etc. Ensures contractors meet Gilbane safety submittal requirements Ensures contractor compliance with Gilbane safety plan & expectations Maintains all safety related documentation Makes recommendations concerning situations hazardous to employee safety or health Utilizes SafetyNet to audit and monitor project team implementation of the Safety Plan Performs at least 15 SafetyNet inspections per month with at least 100 observations in each inspection Provides safety training to project teams on Gilbane, client, and OSHA requirements Investigates all accidents/near misses and completes all paperwork required Ensures project teams have safety equipment and resources Serves as project liaison and manages project correspondence with Insurance carriers Maintains all safety related documentation Coaches and mentors less experienced team members Supports a positive and inclusive work environment Qualifications EXPERIENCE/EDUCATION Bachelor's degree in Occupational Safety Management or Engineering preferred 3-5 years of construction safety management experience BCSP credential Or equivalent combination of education and experience KNOWLEDGE, SKILLS & ABILITIES Proficient knowledge of construction safety principles, techniques, and methods Practical knowledge of OSHA laws, regulations, and policies Capable of identifying known potential exposures and recommending corrective action Strong computer skills and familiarity with the Microsoft Office suite Strong written and verbal communication skills Strong interpersonal skills Gilbane offers an excellent total compensation package which includes competitive health and welfare benefits and a generous profit-sharing/401k plan. We invest in our employees' education and have built Gilbane University into a top training organization in the construction industry. Qualified applicants who are offered a position must pass a pre-employment substance abuse test. Gilbane is an Affirmative Action/Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, color, national origin, race, religion, sex, sexual orientation, gender identity, protected veteran status, or disability status. Note to Recruiters, Placement Agencies, and Similar Organizations: Gilbane does not accept unsolicited resumes from agencies. Please do not forward unsolicited agency resumes to our jobs alias, website, or to any Gilbane employee. Gilbane will not pay fees to any third party agency or firm and will not be responsible for any agency fees associated with unsolicited resumes. Unsolicited resumes received will be considered property of Gilbane and will be processed accordingly. We can recommend jobs specifically for you! Click here to get started.

In addition to performing the basic duties of a Foreman on a construction site, the Area Foreman oversees the work of Next 150 Construction personnel in a specific geography. Responsibilities * Assist the Next 150 Director with assigning and coordinating staff within assigned geography - Partner with Next 150 Director and Gilbane project leadership to ensure manpower and resources are adequate - Assist with hiring and on-boarding of staff in assigned geography - Assist with the training of Next 150 employees across multiple project sites within a defined geography - Help to resolve personnel issues as they arise, including the administration of disciplinary action - Coordinate tasks according to priorities and plans - Assist in the production of schedules, monitor attendance of crew, and sign off on time worked - Allocate general and daily responsibilities - Comply with all safety precautions and ensure that quality standards are met - Report on progress to Gilbane project leadership - Provide labor support as necessary Qualifications EXPERIENCE/EDUCATION - High school diploma or GED - 10+ years of construction experience - Or equivalent combination of education and experience KNOWLEDGE, SKILLS & ABILITIES - In-depth understanding of construction principles and procedures - Ability to read construction drawings - Excellent organizational and leadership skills - Ability to communicate and report effectively - Strong problem-solving skills - Willingness to work in high-stress environment with extreme weather fluctuations - Ability to work in a team environment - OSHA 30 hour certified Next 150 Construction Services has an unwavering focus on safety, the environment and caring about everyone involved in our work. Qualified applicants who are offered a position must pass a pre-employment substance abuse test. Next 150 Construction Services is not accepting unsolicited resumes from third party recruiters at this time. Next 150 Construction Services is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, color, national origin, race, religion, sex, sexual orientation, gender identity, protected veteran status, or disability status.

Category Preconstruction Services Type Full-Time/Regular Please note: * Applying for positions in multiple locations will result in a longer vetting process. * The Whiting-Turner Contracting Company is an Equal Opportunity Employer, including the disabled and veterans. Whiting-Turner is looking for a self-motivated, energetic, dynamic, confident, tech savvy individual who is passionate for creating virtual building efficiencies within the construction industry. This individual will: * Have on the job experience with BIM/VDC applications & processes. * Have extensive knowledge of construction & the built environment. * Lead the execution of the Virtual Building process. * Review and provide feedback on constructability of Design Intent models provided by design partners. * Manage and review fabrication building information models (BIMs) created by subcontractors to facilitate 3D coordination and Clash detection, shop drawing production and prefabrication. * Utilize the coordinated model to support field installation and As-built model delivery at project closeout. * Be proficient in reading construction drawings, understanding specifications and building codes, and other technical data. * Bring creativity and innovation to their projects & groups. Test new software & technologies and make recommendations on the use for project specific needs. * Manage subcontractors and run effective meetings. * Create 3D visualizations as necessary during project lifecycles. * Thrive in a team environment both contributing to larger projects and producing independent work. * Have an innately curious, forward-thinking personality to push innovative ideas in all aspects of daily tasks. * Be able to multi-task and deliver parallel successful products. Software Skills: * Excellent General Computing Skills * Understand Cloud-based file sharing * Autodesk Navisworks Manage * Autodesk Revit * Sketchup * Exposure to one or more of the following software is strongly encouraged: Tekla, AutoCAD, AutoCAD MEP, CAD-Duct, CAD-Mech, Assemble, Revitzo, Synchro, Fuzor, Solibri, etc. Soft Skills: * Excellent written and oral communication skills * Self motivated, energetic, detailed oriented, and open minded * Ability to work well with cross-discipline teams * Skilled at problem solving * Strong Time-Management Skills Required Skills Years of Experience: 4-6 Education: Bachelor's degree (or equivalent) with preference given to Engineering or Construction Management related degrees.

Division: Miami Main Minimum Years Experience: Travel Involved: Job Type: RegularJob Classification: ExperiencedEducation:Job Family:ConstructionCompensation:Salaried Exempt Position Description: Oversee work of Scheduling team, project staff, or consultants assigned to scheduling function, on one or more construction projects of varying size and complexity for Business Unit. Prepare and maintain schedules, develop and review project baseline, and monitor and track scheduling project progress. Essential Duties & Key Responsibilities: * Conduct scheduling activities while leading, managing, and supervising project scheduling activities of Scheduling group (e.g., Scheduling Engineers, project staff, or consultants) assigned to scheduling function on one or more construction projects of varying size and complexity throughout Business Unit (BU). * Perform Scheduling activities including monitoring, tracking progress, and preparing summary and detail level schedules. * Develop full Critical Path Method (CPM) logic-generated baseline schedules for projects, * Communicate project execution plan, monitor performance against original baseline schedule and previous month's forecasts, and promote early identification and mitigation of risks. * Develop construction schedule throughout all project phases, including RFP/Project Launch through Substantial Completion/Final Turnover. * Collaborate with project departments (e.g., Preconstruction, Commissioning, Procurement, Construction) to prepare detailed schedules. * Collaborate with VDC to integrate BIM, 4D models, and logistics planning. * Integrate LPS (Last Planner System) methodology into construction project schedule. * Perform monthly progress updates complete with narrative and create target comparison and periodic look-ahead schedules. * Develop and update cost and/or resource loaded schedules. * Conduct project schedule reviews with project leadership and provide Scheduling Dashboard statistics at Operations Review Meetings (ORMs) or other sessions (e.g., Pull Plan Sessions, Trade contractor meetings). * Participate in Business Development (BD) and BU marketing activities for proposal presentations and activities as related to project scheduling and provide scheduling contract language and related documentation. * Provide support and training of scheduling software and planning and scheduling techniques to project and office employees. * Guide Scheduling group to facilitate and implement consistent application and adherence to company and Turner 'Scheduling Playbook' policies, practices, and procedures. * Develop and maintain relationships with project stakeholders to promote value of scheduling and communication of overall project plan. * Engage with clients as Planning and Scheduling SME (subject matter expert) to educate and influence expectations for Planning and Scheduling standards, and best practices to satisfy owner standards and other requirements. * Conduct project site progress walks to capture progress, review and verify with project team, and update schedule accordingly. * Challenge project team based on previous, current, and future schedule data for As Built vs. Planned progress to ensure logical construction sequencing. * Perform audits of project schedules using diagnostic and comparison software to validate health and quality of schedule, Last Planner System integration, and review risk/gap analysis of scheduling function across projects. Provide feedback to Scheduling group to mature scheduling practices. * Implement and educate Scheduling group to use advanced techniques (e.g., weather conditions, TIAs (Time Impact Analysis), cost and resource loading) to identify potential schedule risks and delays. * As required, provide historical schedule information to defend against or initiate a claim. #LI-TG1 Qualifications: * Bachelor's Degree from accredited degree program in Engineering, Construction Management, Building Construction, or related field, with minimum of 8 years of related experience or equivalent combination of education, training and experience * Large construction project experience (>$100m) * Scheduling Certification desired (e.g., Association for the Advancement of Cost Engineering (AACE), Planning & Scheduling Professional (PSP), Project Management Institute Scheduling Professional (PMI-SP)) * Experience in construction project engineering and supervisory positions * Knowledgeable of building construction, materials, systems, market conditions and Trade practices * Ability to interpret contract documents, drawings, specifications, and scopes of work to build schedules * Proficient use of scheduling software applications (e.g., Oracle Primavera P6) * Proficient use of scheduling diagnostic and comparison tools (e.g., Acumen Fuse, Change Inspector) * Advanced experience conducting gap analysis and managing scheduling risks * Advanced knowledge of estimates for project schedule development * Familiar with earned value concepts and using construction resources to validate productivity and durations * Ability to develop metrics and track results * Strong analysis, critical thinking, good judgment, and problem-solving skills * Experience implementing continuous improvement methods and tools (e.g., lean construction, Takt) Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Performance of the required duties require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction. While performing the duties of this job, the employee is frequently required to sit, climb, balance, stoop, kneel, crouch, crawl, use hands to finger, handle or feel objects, tools, or controls, and reach with hands, talk, and hear. The employee frequently views a computer monitor and frequently uses a computer keyboard. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. The employee is regularly required to be mobile, and the employee occasionally travels both short and long distances via a variety of conveyances. The employee occasionally performs work on-site at construction work sites, office locations, and/or off-site venues. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works at construction work sites where the employee is exposed to moving mechanical parts, high precarious places, fumes, or airborne particles, outside weather conditions, and risk of electrical shock. The noise in the work environment is usually moderate to loud. While performing the duties of this job, the employee occasionally works in an office or remote setting. The noise in the work environment is usually quiet to moderate in an office setting. The employee is required to work in compliance with company safety policies, procedures, and applicable laws. Turner is an Equal Opportunity Employer - race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other characteristics protected by applicable law.

The Labor Journeyman performs basic housekeeping on construction site. Responsibilities Labor Journeyman typical responsibilities and duties include, but are not limited to the following: - Perform setup and clean up tasks at job site, including removal of construction debris - Navigate construction job site terrain - Clean & sanitize jobsite trailers - Assist with basic deliveries & material storage - Housekeeping interior and exterior project site - Provide labor support as necessary for carpenters, masons, and other specialized contractors, work to be directed & planned by Foreperson - Reporting all safety incidents & injuries to Foreperson and Safety Leader - Any scope of work outside of they above listed, shall be planned, documented, and approved by Foreperson, Safety & Management Qualifications EXPERIENCE/EDUCATION - High school diploma or GED - Construction experience preferred - Or equivalent combination of education and experience - OSHA 10 hour certified recommended, (Next 150 Construction will assist with obtaining this certification if necessary) - Proof of certificates, degrees, etc. upon hire - Must possess a valid Florida Drivers License KNOWLEDGE, SKILLS & ABILITIES - Basic understanding of construction principles and procedures - Willingness to work in high-stress environment with extreme weather fluctuations - Ability to work in a team environment Next 150 Construction Services has an unwavering focus on safety, the environment and caring about everyone involved in our work. Qualified applicants who are offered a position must pass a pre-employment substance abuse test. Next 150 Construction Services is not accepting unsolicited resumes from third party recruiters at this time. Next 150 Construction Services is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, color, national origin, race, religion, sex, sexual orientation, gender identity, protected veteran status, or disability status.

Are you looking for a highly rewarding opportunity that provides extensive career growth opportunity on a large project? Gilbane is seeking a Field Engineer II to be responsible for learning all roles and responsibilities of the Project Engineer and Superintendent function, and leveraging training within the field for hands on experience. Who are we? As a Top-10 ENR Contractor, Gilbane is a family-owned business with 45 offices that has been shaping communities since 1870. Consistently recognized as one of the most reputable construction management firms in the country, Gilbane is committed to delivering projects safely and on-time. You will have the opportunity to build schools, labs, hospitals, corporate offices, sports arenas and more! We are dedicated to building a diverse, inclusive and authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Who are you? You are someone who acts inclusively, showing empathy and treating others with respect and dignity in order to uphold Gilbane's core value of Caring and “People First” workplace culture. You seek to listen in order to understand and can convey information clearly. You're a strong problem solver who can identify, prioritize, and implement alternatives for solutions, and you demonstrate adaptability by collaborating with others and supporting team members to achieve excellence. A self-starter who shows passion, commitment, and ownership all while delivering on business outcomes and driving results. You're someone who identifies opportunities for new and improved ways of doing things that result in value-add solutions. Your core values match Gilbane's: Integrity, Caring, Teamwork, Toughmindedness, Dedication to Excellence, Discipline, Loyalty, and Entrepreneurship. What's in it for you? Gilbane offers employees multi-dimensional training opportunities through a number of resources. While managing your responsibilities to projects, you will be able to enroll in trainings through our award-winning Gilbane University to build leadership and technical skills. In addition, you would work with an experienced team which provides you with the opportunity to learn new industry skills every day. You will protect and promote the interests of both Gilbane and the client in all matters as well as demonstrating the personal characteristics of a developing leader. Responsibilities Partners with other Engineers, Project Managers and/or Superientdents to coordinate and distribute all project information Works with the project team to ensure all contract documents, including logs are up to date in real time Ensures status reports on RFIs, submittals and other documents are prepared and presented Creates PCIs in CMiC, issues RFQs and reviews quotes from trades, assists in preparation of ATP and OCOS Participates in reviewing scopes of work for bid packages Maintains the Material Equipment Status Report Develops the submittal register Prepares change management reports, estimates and other cost report documents Conducts and manages quality control activities; ensures activities are documented properly and corrective action occurs, when necessary Reviews contractors' startup documents (safety startup submittals, contract compliance, etc.) Works with Lead Superintendent for trade contractor responsibilities throughout project Enforces Gilbane's high safety standards Manages and performs weekly safety inspections Participates in Schedule Updates and Pull Plans Works collaboratively with field team to ensure milestone dates are met Coordinates and manages general conditions work and project logistics Communicates with Trade Contractors and AE on field and QAQC related questions Prepares and contributes to daily reports Provides input and suggestions for trade contractor weekly meetings Communicates with Site Services/ Next150, orders material, and understands workforce needs, ensures clean jobsite Assists with Time and Materials (T&M) process Participates in stretch and flex, daily huddle, and reviews pre-task plans May be required to assist with tasks typically assigned to more junior positions Promotes organizational change initiatives, suggests new ideas, and continuously adapts to work within new structures and processes Qualifications EXPERIENCE/EDUCATION Bachelor's or Master's degree in Engineering or Construction Management 1-2 years of experience or internships with a construction organization Or equivalent combination of education and experience KNOWLEDGE, SKILLS & ABILITIES Some knowledge of commercial/institutional construction project Excellent problem solving skills and ability to adapt to changing needs Knowledge of Procore Good capabilities in Microsoft Office programs Strong technical and communication skills are critical OSHA 30 hour certification required First Aid, CPR Trained Construction-document and drawing literate Ability to work in a team environment Gilbane offers an excellent total compensation package which includes competitive health and welfare benefits and a generous profit-sharing/401k plan. We invest in our employees' education and have built Gilbane University into a top training organization in the construction industry. Qualified applicants who are offered a position must pass a pre-employment substance abuse test. Gilbane is an Affirmative Action/Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, color, national origin, race, religion, sex, sexual orientation, gender identity, protected veteran status, or disability status. Note to Recruiters, Placement Agencies, and Similar Organizations: Gilbane does not accept unsolicited resumes from agencies. Please do not forward unsolicited agency resumes to our jobs alias, website, or to any Gilbane employee. Gilbane will not pay fees to any third party agency or firm and will not be responsible for any agency fees associated with unsolicited resumes. Unsolicited resumes received will be considered property of Gilbane and will be processed accordingly. We can recommend jobs specifically for you! Click here to get started.

Category Construction Operations Type Full-Time/Regular The Whiting-Turner Contracting Company is a national ENR Top 25 General Contractor seeking qualified field supervision for various commercial projects in a fast paced, entrepreneurial, team-based working environment. Qualified candidates shall possess 3-20+ years of experience in the industry and a track record for delivering complex projects with minimal delays and emphasis on customer delight. Proven ability to implement and maintain full control of all field matters while managing the safety and quality on site. The following experience and skill set are preferred: * Bachelor of Science in an Engineering or Construction discipline: Engineering Technology, Construction Management, Construction Technology, Civil Engineering, Architecture * Basic knowledge of construction principles and ambition to succeed/advance. * Knowledge of basic business principles sufficient to project and monitor expenses. * Proficiency in Microsoft Office Suite including Word and Excel. * Ability to read and understand technical specifications, blueprints, technical manuals, product/material installation instructions and engineering/architectural drawings. * Ability to communicate effectively verbally and in writing. Salary Range The base salary range for this position represents the Company's good faith and reasonable estimate at the time of posting and is dependent on a number of factors including but not limited to role, level, relevant education, experience, training, skills and abilities, location, and market and business considerations. Individual pay is determined through interviews and an assessment of the various factor identified above. The foregoing information reflects base salary only and does not include other forms of available compensation to which employees may be entitled including but not limited to profit sharing, appreciation rights, retirement compensation, travel subsistence, holiday contribution, vacation, sick leave, parental leave, healthcare (including dental and vision benefits), life insurance, disability insurance, and other compensations/benefits, which are dependent upon various factors including but not limited to years of service, location, performance, etc. The annual base salary range listed is subject to change at any time, in the Company's discretion, and does not alter in any way the at-will nature of the employment relationship. Please note: * Applying for positions in multiple locations will result in a longer vetting process. * The Whiting-Turner Contracting Company is an Equal Opportunity Employer, including the disabled and veterans. Salary Range $74,000.00 - $230,000.00

Division: Miami Main Minimum Years Experience: Travel Involved: Job Type: RegularJob Classification: ExperiencedEducation:Job Family:ConstructionCompensation:Salaried Exempt If you picture yourself doing great things that make a difference in the lives of others, Turner is the place to be. Turner Construction is an industry leading commercial construction general contractor with a 120-year history spanning iconic projects around the globe, including 10 of the world's 100 tallest buildings. Turner is committed to sustaining a diverse, equitable, and inclusive environment where everyone feels connected, sees themselves represented at all levels of the company, and feels supported to reach their ultimate potential. Turner builds some of the most ambitious projects in the world. The technical expertise of our people makes us a recognized leader in many markets. Our projects are well known. Our people set us apart. We inspire greatness. Can you picture yourself at Turner? If so, apply and let's do great things together! Position Description: Leads and supports at the Business Unit or Project Level efforts which are focused on enhancing customer value, nurturing a learning environment, facilitating continuous improvement processes, and maximizing project team collaboration. Reports to: General Manager, Operations Manager, or Regional Lean Manager. If assigned to a specific project, reports to the Project Executive or Project Manager. Has a dotted line reporting relationship to Regional Lean Manager. Essential Duties & Responsibilities*: In the areas assigned: * Change agent implementing strategies that develop and strengthen a lean enterprise culture in alignment with region and company goals and priorities * Works daily with the team(s) in the utilization of the mechanics of Last Planner System * Is a key member of the Business Unit or Project Management team(s) providing insight, direction and strategic alignment to the business * Utilizing the Launch Matrix, works with project teams to support a successful project launch * Supports project teams in using Lean Roadmap as a planning tool to achieve project and company goals * Provides a consistent presence on assigned projects working with each team in setting up Visual Management, the Last Planner System, 5S, etc. * Supports development and implementation of local project and BU improvement and innovation initiatives through workshops, training, coaching, etc. to teach and practice lean principles, methods and tools * Works with Regional Lean Manager and others to share and learn from improvement efforts * Works with Regional Lean Manager to implement standard work for own activities (LPS coaching, Lean Training, etc.) * Implements improvement and innovation projects based on direction set by business unit/regional leadership * Facilitates the establishment of a lean management system and culture * Develops and conducts standard lean training throughout region as well as supporting national training programs on topics such as: Last Planner System, lean problem solving & process improvement, lean leadership and culture * Conducts regular project reviews with the Project Team, Operations Manager, and Regional Lean Manager to review project status, challenges, and opportunities and to establish measurable goals for improvement * May perform other duties as necessary or assigned Supports project teams in using Lean Roadmap as a learning resource by developing and following a plan to achieve project goals. #LI-TG1 Qualifications: Bachelor's degree plus a minimum of five years' related experience or an equivalent combination of education, training and/or experience. Proven written and verbal communication abilities; proficiency with computer applications, including Microsoft Office suite. Ability to read, understand and interpret contract documents, drawings, specifications, scopes of work and project schedule. Demonstrated leadership and interpersonal skills. Preferred Last Planner System project experience (alternatively, completed Advancing Lean training program). Preferred general lean knowledge and experience. Preferred experience working with BIM and BIM staff. Curiosity and interest in life-long learning and personal development. Willing to challenge status quo. Change agent who is able to influence others and "lead without authority". Shows initiative (i.e., self-starter), patience, and perseverance. Has coaching mindset and skills. Extensive travel is required. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Performance of the duties will occasionally require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. Performing this job requires use of hands to finger, handle, or feel objects, tools or controls, sit, talk and hear (bells, whistles, etc.), stand, climb, balance, stoop, kneel, crouch, or crawl. Employee must occasionally lift and/or move up to 25lbs. Work Environment: While performing the duties of this job, the employee works on-site at the construction worksite where the employee is regularly exposed to moving mechanical parts; high precarious places; fumes or airborne particles; outside weather conditions and risk of electrical shock. The noise in this work environment is usually moderate to very loud. *May perform other duties as necessary or assigned. Turner is an Equal Opportunity Employer - race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other characteristics protected by applicable law. Turner is an Equal Opportunity Employer - race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other characteristics protected by applicable law.

Overview A Carpenter Journeyman performs basic installation of materials on a construction sites. Responsibilities Carpenter Journeyman typical responsibilities and duties include, but are not limited to the following: - Install items related to job site safety and functionality including safety rails, toe boards, ramps, temporary walls, temporary enclosures, elevator protection, decks for construction trailers - Build planning tables - Hang safety signs - Cover holes or open areas that are safety hazards - Mount Smartboards and TVs in job site trailers - Hang shelving in job site trailers - Reporting all safety incidents & injuries to Foreperson and Safety Leader - Any scope of work outside of they above listed, shall be planned, documented, and approved by Foreperson, Safety & Management Qualifications EXPERIENCE/EDUCATION - High school diploma or GED - 2+ years of carpentry experience - Or equivalent combination of education and experience - OSHA 10 hour certified recommended, (Next 150 Construction will assist with obtaining this certification if necessary) - Proof of certificates, degrees, etc. upon hire - Must possess a valid Florida Drivers License KNOWLEDGE, SKILLS & ABILITIES - Basic understanding of construction principles and procedures - Willingness to work in high-stress environment with extreme weather fluctuations - Ability to work in a team environment Next 150 Construction Services has an unwavering focus on safety, the environment and caring about everyone involved in our work. Qualified applicants who are offered a position must pass a pre-employment substance abuse test. Next 150 Construction Services is not accepting unsolicited resumes from third party recruiters at this time. Next 150 Construction Services is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, color, national origin, race, religion, sex, sexual orientation, gender identity, protected veteran status, or disability status.

Are you a highly technical, strong communicator who thrives in a team environment on complex projects? Gilbane is seeking a Sr. Scheduler to support current and future needs, utilizing advanced scheduling techniques on challenging projects, with opportunities for those open to travel or relocation. We are actively building our talent pool for future opportunities within our organization. If you are interested, please submit your application, and we will contact you for an initial discussion. Who are we? As a Top-10 ENR Contractor, Gilbane is a family-owned business with 45 offices that has been shaping communities since 1870. Consistently recognized as one of the most reputable construction management firms in the country, Gilbane is committed to delivering projects safely and on-time. You will have the opportunity to build schools, labs, hospitals, corporate offices, sports arenas and more! We are dedicated to building a diverse, inclusive and authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Who are you? You are someone who acts inclusively, showing empathy and treating others with respect and dignity in order to uphold Gilbane's core value of Caring and “People First” workplace culture. You seek to listen in order to understand and can convey information clearly. You're a strong problem solver who can identify, prioritize, and implement alternatives for solutions, and you demonstrate adaptability by collaborating with others and supporting team members to achieve excellence. A self-starter who shows passion, commitment, and ownership all while delivering on business outcomes and driving results. You're someone who identifies opportunities for new and improved ways of doing things that result in value-add solutions. Your core values match Gilbane's: Integrity, Caring, Teamwork, Toughmindedness, Dedication to Excellence, Discipline, Loyalty, and Entrepreneurship. What's in it for you? Gilbane offers employees multi-dimensional training opportunities through a number of resources. While managing your responsibilities to projects, you will be able to enroll in trainings through our award-winning Gilbane University to build leadership and technical skills. In addition, you would work with an experienced team which provides you with the opportunity to learn new industry skills every day. You will protect and promote the interests of both Gilbane and the client in all matters as well as demonstrating the personal characteristics of a developing leader. Responsibilities Provides oversight relative to all aspects of planning & scheduling within assigned projects Performs as the scheduling expert for the Business Unit (BU), performing work on advanced and complicated tasks Demonstrates an advanced expertise in scheduling tools and techniques and regularly stays connected to current and new industry standards Makes recommendations to Divisional management regarding adoption of latest advances in scheduling practices Performs skillfully schedule & cost loading for CPM schedules Performs proficient schedule analysis and analyzes variances and trends when comparing multiple schedules Performs the delay claims process, develops delay analysis narratives, and coordinates with the Legal Department Participates in formal proposals and interviews for prospective projects Ensures adequate controls are in place so that proper schedule techniques and update procedures are followed on all assigned projects Coaches and mentors less experienced team members Trains others in risk identification and mitigation Conducts and reviews monthly project audits and provides recommendations for risk mitigation plans Reports concerns and updates to Business Unit management regarding proper project controls on any projects within a Business Unit Monitors overall performance indicators Manages workload and deliverables and balances with available backlogged recoveries Trains Project Managers and Superintendents on how to schedule and use scheduling software to manage work in the field Participates in the Scheduling peer group by actively getting involved in regular meetings or joining a subcommittee Utilizes industry standard software to support scheduling process Supports a positive and inclusive work environment Qualifications EXPERIENCE/EDUCATION Bachelor's degree in Construction, Engineering, Architecture, or related field 8-17 years of related experience Professional Certification in AACEi, PMI, AGC, CMAA, or similar is recommended Or equivalent combination of education and experience KNOWLEDGE, SKILLS & ABILITIES In-depth knowledge of construction means, methods, sequences, crew sizes, productivity rates, manpower analysis, cash flow, and CPM scheduling Excellent planning and problem-solving skills Strong communication, interpersonal and teamwork skills Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data. For Albany NY, Buffalo NY, Ohio, South Carolina, Indiana, Orlando FL, Tampa FL. Sarasota FL, Jacksonville FL, Arizona, San Antonio TX, Richmond VA, Pittsburgh PA this ranges from $147,000-$179,600.00 plus benefits and retirement program. For Atlanta GA, Maryland, Boca Raton FL, North Carolina, Detroit MI, Connecticut, Rhode Island, Rochester MN, this ranges from $154,400.00-$188,600.00 plus benefits and retirement program. For Austin TX, Chicago IL, Houston TX, Philadelphia PA, Sacramento CA this ranges from $161,700.00-$197,600.00 plus benefits and retirement program. For Arlington VA, Boston MA this ranges from $172,000.00-$210,100.00 plus benefits and retirement program. For Concord CA, Los Angeles CA this ranges from $179,300.00-$219,100.00 plus benefits and retirement program. For San Jose CA, New York NY this ranges from $188,200.00-$229,900.00 plus benefits and retirement program. Gilbane offers an excellent total compensation package which includes competitive health and welfare benefits and a generous profit-sharing/401k plan. We invest in our employees' education and have built Gilbane University into a top training organization in the construction industry. Qualified applicants who are offered a position must pass a pre-employment substance abuse test. Gilbane is an Affirmative Action/Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, color, national origin, race, religion, sex, sexual orientation, gender identity, protected veteran status, or disability status. Note to Recruiters, Placement Agencies, and Similar Organizations: Gilbane does not accept unsolicited resumes from agencies. Please do not forward unsolicited agency resumes to our jobs alias, website, or to any Gilbane employee. Gilbane will not pay fees to any third party agency or firm and will not be responsible for any agency fees associated with unsolicited resumes. Unsolicited resumes received will be considered property of Gilbane and will be processed accordingly. We can recommend jobs specifically for you! Click here to get started.

Division: Orlando Minimum Years Experience: Travel Involved: Job Type: RegularJob Classification: ExperiencedEducation:Job Family:ConstructionCompensation:Salaried Exempt If you picture yourself doing great things that make a difference in the lives of others, Turner is the place to be. Turner Construction is an industry leading commercial construction general contractor with a 120-year history spanning iconic projects around the globe, including 10 of the world's 100 tallest buildings. Turner is committed to sustaining a diverse, equitable, and inclusive environment where everyone feels connected, sees themselves represented at all levels of the company, and feels supported to reach their ultimate potential. Turner builds some of the most ambitious projects in the world. The technical expertise of our people makes us a recognized leader in many markets. Our projects are well known. Our people set us apart. We inspire greatness. Can you picture yourself at Turner? If so, apply and let's do great things together! Position Description: Leads, manages, and coordinates the MEP phases of one or more projects from preconstruction through closeout. Contributes to the securing of new work for the company. Turner has amazing projects starting up throughout the country and we're looking for someone that is "Open to Travel" to join us as an MEP Project Executive. This role will be supporting projects in a variety of locations. Reports to: Construction Executive, Operations Manager, Senior Operations Manager, Regional Operations Manager Essential Duties & Responsibilities*: * Develop and maintain long-lasting relationships with clients, the design community, and organizations to enhance future business development opportunities. * Develop high-performance teams through supervision, training, coaching, and mentoring. Ensure regular feedback is shared with staff including timely completion of employee performance appraisals. * Collaborate with Sales and Marketing Departments to secure new work for the business unit. * Ensure strict adherence to ethics and compliance requirements on all projects. * Provide leadership in risk evaluation, contract negotiations, fee and pricing decisions. * Manage and lead multiple projects simultaneously from preconstruction through closeout. * Oversee the development of the master project schedule and manage its implementation. * Provide oversight for budget and financial management for all projects. * Support and drive utilization of various Turner initiatives and technologies. * Oversee the administration of the Quality Assurance/Quality Control (QA/QC) program. * Drive enforcement of safety protocols by the project staff. * Become a good corporate citizen in the community and maximize Turner-controlled resources to benefit business unit goals and objectives. #LI-NM1 Qualifications: Bachelor's Degree plus minimum of eighteen years' related experience or an equivalent combination of education, training and/or experience. Thorough knowledge of construction cost, scheduling, estimating, purchasing, and engineering principles and techniques, as well as accounting principles. Ability to seek out and find business opportunities. Must have knowledge of regional market and sales/closing skills. Proven written and verbal communication abilities, proficiency with computer applications, including Microsoft Office Suite of programs. Must have advanced presentation skills. Ability to read, understand and interpret contract documents, drawings, specifications, scopes of work and project schedule. Ability to implement leading-edge technologies such as Building Information Models (BIM) and Lean to benefit the project. Demonstrated leadership and interpersonal skills. Physical Demands: Performance of the required duties will require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. Performing this job requires use of hands to finger, handle, or feel objects, tools or controls, sit, talk and hear, stand, climb, balance, stoop, kneel, crouch, or crawl. Employee must occasionally lift and/or move up to 50 pounds. Work Environment: While performing the duties of this job, the employee regularly works on-site at the construction work site where the employee is exposed to moving mechanical parts; high precarious places; fumes or airborne particles; outside weather conditions and risk of electrical shock. The noise in these work environments is usually moderate to very loud. * May perform other duties as assigned. Turner is an Equal Opportunity Employer - race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other characteristics protected by applicable law.

Are you looking for a highly rewarding opportunity that provides extensive career growth opportunity? Senior Estimator to lead estimating efforts on large, complex projects alongside the Senior Estimating Manager on various locations nationwide. This role requires expertise and is open to candidates willing to travel or relocate for exciting opportunities. We are actively building our talent pool for future opportunities within our organization. If you are interested, please submit your application, and we will contact you for an initial discussion. Who are we? As a Top-10 ENR Contractor, Gilbane is a family-owned business with 45 offices that has been shaping communities since 1870. Consistently recognized as one of the most reputable construction management firms in the country, Gilbane is committed to delivering projects safely and on-time. You will have the opportunity to build schools, labs, hospitals, corporate offices, sports arenas and more! We are dedicated to building a diverse, inclusive and authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Who are you? You are someone who acts inclusively, showing empathy and treating others with respect and dignity in order to uphold Gilbane's core value of Caring and “People First” workplace culture. You seek to listen in order to understand and can convey information clearly. You're a strong problem solver who can identify, prioritize, and implement alternatives for solutions, and you demonstrate adaptability by collaborating with others and supporting team members to achieve excellence. A self-starter who shows passion, commitment, and ownership all while delivering on business outcomes and driving results. You're someone who identifies opportunities for new and improved ways of doing things that result in value-add solutions. Your core values match Gilbane's: Integrity, Caring, Teamwork, Toughmindedness, Dedication to Excellence, Discipline, Loyalty, and Entrepreneurship. What's in it for you? As a Senior Estimator, you will supervise a team of Estimators in an effort to price and bid multiple projects. You will work under an experienced professional that will provide you with opportunity to learn the department's standard operating procedures and build strong relationships with the Preconstruction team. You will have a heavy hand in the coordination and supervision of other Estimators and will price/bid projects that shape your community. Additionally, Gilbane offers employees multi-dimensional training opportunities through several resources for those that are early in their career. Our award-winning Learning & Development department, Gilbane University, offers a variety of in-person and webinar-based trainings to help you excel in your career. Responsibilities Leads the estimating deliverable for an entire project coordinated with the Senior Estimating Manager, preconstruction lead, operations team, and Business Development (BD) staff (projects ranging in size and complexity as assigned by Senior Estimating Manager) Coordinates the development of the Site Services general costs with the operations team, Senior Estimating Manager, and preconstruction lead to align with contract requirements and trade costs Develops self by training under Senior Estimating Manager/Estimating Manager for conceptual cost estimates and budgets on limited information while providing adequate written clarifications of the costing assumptions Reviews and understands all project plans, requirements, and specifications Coaches and mentors a team of estimators to develop large, multi-disciplinary estimates Develops and recommends appropriate contingency and allowance values with each estimating deliverable Determines labor and equipment costs Reviews and understands all bid documents while assessing project risks Understands project logistics and project schedule for complete alignment with the estimate and estimating deliverable Assists the operations team in the development of bid packages; assists in the analysis of competitive subcontract and supplier bids Attends scope review meetings as required to assist the operations and purchasing teams in the preparation of bid recommendations Connects with clients, ensuring customer satisfaction Develops accurate cost models within Gilbane's costing software Tracks and reports on current material and labor prices, including escalation Determines lead times for equipment and materials; communicates with the entire project team to capture the information within the project schedule Develops meaningful Value Management contributions to reduce price and increase value Collaborates with the Owner and design team to reconcile cost estimates Identifies escalation factors in marketplace for specific materials and labor rates Develops sound conceptual pricing assumptions with sound documentation for the basis of the estimate Substantiates all aspects of final estimates Engages and participates in external communication including interviews and presentation of estimating deliverables Coaches and mentors less experienced team members Supports a positive and inclusive work environment May be required to assist with tasks typically assigned to more junior positions Qualifications EXPERIENCE/EDUCATION Bachelor's degree in Engineering or Construction Management 5-10+ years relevant experience Or equivalent combination of education and experience KNOWLEDGE, SKILLS & ABILITIES Ability to lead the estimating process and deliverable for projects throughout the design phase Extensive knowledge of On-Screen Take-off, Destini, and Site work software tools for take-offs Ability to present estimating deliverables (internally and externally) and participates in interviews during the pursuit phase Ability to conceptually estimate projects with limited information Ability to estimate multiple facility types such as residential high rise, healthcare, interiors and institutional Ability to estimate within multiple delivery methods Ability to maintain healthy working relationships with industry partners (Owners, designers, subcontractors, etc.) for the development of estimating deliverables Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data. For Albany NY, Buffalo NY, Ohio, South Carolina, Indiana, Orlando FL, Tampa FL. Sarasota FL, Jacksonville FL, Arizona, San Antonio TX, Richmond VA, Pittsburgh PA this ranges from $112,200-$137,200.00 plus benefits and retirement program. For Atlanta GA, Maryland, Boca Raton FL, North Carolina, Detroit MI, Connecticut, Rhode Island, Rochester MN, this ranges from $117,800.00-$144,100.00 plus benefits and retirement program. For Austin TX, Chicago IL, Houston TX, Philadelphia PA, Sacramento CA this ranges from $123,400.00-$150,900.00 plus benefits and retirement program. For Arlington VA, Boston MA this ranges from $131,300.00-$160,500.00 plus benefits and retirement program. For Concord CA, Los Angeles CA this ranges from $136,900.00-$167,400.00 plus benefits and retirement program. For San Jose CA, New York NY this ranges from $143,600.00-$175,600.00 plus benefits and retirement program. Gilbane offers an excellent total compensation package which includes competitive health and welfare benefits and a generous profit-sharing/401k plan. We invest in our employees' education and have built Gilbane University into a top training organization in the construction industry. Qualified applicants who are offered a position must pass a pre-employment substance abuse test. Gilbane is an Affirmative Action/Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, color, national origin, race, religion, sex, sexual orientation, gender identity, protected veteran status, or disability status. Note to Recruiters, Placement Agencies, and Similar Organizations: Gilbane does not accept unsolicited resumes from agencies. Please do not forward unsolicited agency resumes to our jobs alias, website, or to any Gilbane employee. Gilbane will not pay fees to any third party agency or firm and will not be responsible for any agency fees associated with unsolicited resumes. Unsolicited resumes received will be considered property of Gilbane and will be processed accordingly. We can recommend jobs specifically for you! Click here to get started.

Division: Miami Main Minimum Years Experience: Travel Involved: Job Type: RegularJob Classification: ExperiencedEducation:Job Family:ConstructionCompensation:Salaried Exempt If you picture yourself doing great things that make a difference in the lives of others, Turner is the place to be. Turner Construction is an industry leading commercial construction general contractor with a 120-year history spanning iconic projects around the globe, including 10 of the world's 100 tallest buildings. Turner is committed to sustaining a diverse, equitable, and inclusive environment where everyone feels connected, sees themselves represented at all levels of the company, and feels supported to reach their ultimate potential. Turner builds some of the most ambitious projects in the world. The technical expertise of our people makes us a recognized leader in many markets. Our projects are well known. Our people set us apart. We inspire greatness. Can you picture yourself at Turner? If so, apply and let's do great things together! Position Description: Manage, evaluate, and assess information related to Mechanical and Electrical systems necessary to construct the project on time in a safe manner, within budget, and to the quality specified by the contract documents. Essential Duties & Responsibilities: Specifically relating to the mechanical and electrical systems: * Lead the Turner project team, subcontractors, owner's consultants and representatives to ensure optimal alignment and efficient systems installation. * Prepare and manage the contract item's list for all components, materials, and systems to ensure that all ROJ dates are in compliance with the project schedule with the appropriate approval status. * Participate in schedule update meetings and provide the latest information for an informed and accurate schedule. * Evaluate and manage the processing of RFI's. * Manage the budget including the review, evaluation, and negotiation of all change orders with understanding of the financial status of all subcontractors. * Supervise, coach and mentor Assistant MEP Engineers. * Co-lead the MEP Coordination Process with the VDC Engineer, ensuring overall installation is in compliance with the design requirements, operations and maintenance fundamentals, and quality standards. * Prepare scope of work documents with a division of responsibility for trades and specific scopes of work for temporary operations. * Partner with the MEP Superintendent to resolve conflicts between the mechanical and electrical systems with the site logistics plan and in compliance with the project schedule. * Co-lead with the MEP Superintendent the overall turnover process including start-up, testing, commissioning and closeout. * Conduct regular project walkthroughs with the MEP staff to ensure that work is proceeding in accordance with the contract documents, coordination drawings, and approved submittals. * Identify and inform field staff of difficult installation requirements in sufficient time to allow for proper planning and execution. * Manage and secure all municipal and agency documentation required for temporary certificates of information and system operation. * Create and implement the quality control plan with the MEP Superintendent. #LI-NM1 Qualifications: Bachelor's Degree in Engineering and a minimum of four years of relevant engineering experience or an equivalent combination of education, training, and/or experience relating to mechanical and electrical systems. Technical expertise and understanding of all mechanical and electrical systems that support the broad array of project types in our portfolio and how they interrelate with each other. Business acumen to plan, manage, and execute all the essential duties with excellent verbal and written communication skills, organizational ability, and proficiency with computer applications. Demonstrate the personal attributes of a leader to encourage the development of a high performing team. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Performance of the duties will occasionally require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. Performing this job requires use of hands to finger, handle, or feel objects, tools or controls, sit, talk and hear (bells, whistles, etc.), stand, climb, balance, stoop, kneel, crouch, or crawl. Employee must occasionally lift and/or move up to 50 lbs. Work Environment: While performing the duties of this job, the employee regularly works on-site at the construction work site where the employee is exposed to moving mechanical parts; high precarious places; fumes or airborne particles; outside weather conditions and risk of electrical shock. The noise in these work environments is usually moderate to very loud. * May perform other duties as assigned. Where applicable, all activities will include disabled and veterans' organizations. Turner is an Equal Opportunity Employer - race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other characteristics protected by applicable law.