Controls Engineer jobs at Belcan

We are seeking a Level 4 Senior Staff RF Antenna Engineer with deep expertise in antenna systems, element/mutual coupling, and free-space radiation performance-and the proven ability to rapidly evaluate, troubleshoot, and optimize existing antenna designs. This is a high-impact, fast-response role supporting programs where performance shortfalls must be diagnosed and corrected on aggressive timelines. You will bridge simulation, measurement, and practical implementation to deliver solutions that work-quickly and reliably. Key Responsibilities: Rapidly assess existing antenna and array designs for performance gaps against requirements. Diagnose and resolve issues related to mutual coupling, beam distortion, impedance mismatch, and bandwidth limitations. Recommend and implement design modifications for immediate performance improvements. Perform accelerated free-space radiation pattern measurements and compare results against simulations. Run high-fidelity EM simulations (HFSS, CST, FEKO, or similar) under compressed schedules for fast validation. Evaluate antenna integration into host platforms for mechanical, thermal, and electrical compatibility. Support urgent production and field troubleshooting, including on-site technical interventions when required. Collaborate with RF systems engineers to ensure antenna performance aligns with system-level budgets and phase stability. Produce clear, actionable evaluation reports for program stakeholders, often under short deadlines. Mentor junior engineers in rapid diagnostic and problem-solving methods. Compensation Range: $112,900 - $146,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Required Qualifications: Bachelor's degree in Electrical Engineering, RF Engineering, or related field (Master's or PhD preferred). 10+ years of antenna design and/or evaluation experience in radar, communications, or EW systems. Expert understanding of antenna theory, EM propagation, polarization, and impedance matching. Proven ability to mitigate mutual coupling in dense or phased-array configurations. Experience delivering high-quality antenna evaluations and solutions under aggressive timelines. Proficiency with EM simulation tools such as HFSS, CST, FEKO, GRASP. Hands-on experience with antenna measurement in both anechoic chambers and open-air ranges. US Citizenship with ability to obtain and maintain a security clearance. Preferred Skills: Experience with low-observable and conformal antenna designs. Familiarity with wideband, multiband, and frequency-agile antenna systems. Exceptional problem-solving and communication skills for high-pressure, time-sensitive projects. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

We are seeking a Senior RF Engineer to design, develop, and test discreet transmit/receive (Tx/Rx) RF modules for advanced radar applications. The ideal candidate will have a strong background in RF circuit design, system integration, and performance optimization, with hands-on experience in taking designs from concept to production. Key Responsibilities: Design, simulate, and develop discreet RF Tx/Rx modules for radar systems. Conduct RF system-level analysis, link budget calculations, and trade-off studies. Select and integrate components such as mixers, amplifiers, oscillators, and filters. Perform schematic capture, PCB layout reviews, and work closely with layout engineers to ensure optimal high-frequency performance. Conduct laboratory testing, tuning, and validation of RF modules against specifications. Collaborate with cross-functional teams including firmware, mechanical, and systems engineering to ensure seamless product integration. Support troubleshooting and root cause analysis for performance anomalies. Maintain comprehensive documentation for design decisions, test results, and compliance requirements. Compensation Range: $99,100 - $128,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Required Qualifications: Bachelor's degree in Electrical Engineering, RF Engineering, or related field. 5-8 years of experience in RF design, with a focus on radar or similar high-frequency applications (L,S,C, and X band). Proficiency in RF simulation tools (e.g., Keysight ADS, HFSS, CST, or similar). Proficiency in schematic capture and PCBA layout tools (e.g. Altium Designer, PADS, Allegro) Hands-on experience with RF test equipment (VNA, spectrum analyzers, signal generators, power meters). Solid understanding of RF/microwave circuit theory, impedance matching, noise figure, and gain optimization. Experience with PCB design for RF and microwave circuits. Familiarity with military or aerospace standards for RF systems is a plus. US Citizenship and ability to obtain/maintain a security clearance. Preferred Skills: Knowledge of phased-array radar architectures. Electronics packaging concepts Familiarity with thermal and mechanical considerations in high-frequency module packaging. Citizenship Requirements: Must be a U.S. citizen, Permanent Resident (green card holder), or protected individual as defined by 8 U.S.C. 1324b(a)(3). Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is hiring an Equipment & Tool Engineer (Asset Software & Controls Eng.) in Everett, WA. If you're driven to turn innovative ideas into reliable production solutions and enjoy working at the intersection of engineering, manufacturing, and operations, this role offers a hands-on opportunity to make a direct impact on aircraft production. Key highlights Hiring across experience levels: Associate, Mid-level, and Experienced. Work on design, procurement, and sustainment of electrical/electronic automated equipment for manufacture and system functional testing. Provide support for manual test and production equipment as needed to sustain airplane production. Collaborate with Design Engineering, Manufacturing Engineering, Manufacturing, Maintenance, and Metrology. What you'll do Gather requirements from stakeholders and define project scope. Evaluate make/buy alternatives and develop specifications and designs (CAD as required). Develop and debug equipment software and provide equipment documentation. Deliver real-time troubleshooting support for equipment issues that factory personnel can't diagnose. Manage project budgets and timelines as required. Who succeeds here Passion for process improvement and efficiency. Hands-on mindset and a strong desire to work in the factory with mechanics, safety, and equipment services. Commitment to safety, quality, and integrity. Join Production Engineering and collaborate with experts in production, quality, design, and supply chain to guide aircraft from design to delivery. Bring your ideas to Boeing and help shape the future of aerospace manufacturing. Primary Responsibilities: This role focuses on the development, implementation, and continuous improvement of production equipment and tooling. Key duties include: Evaluate, select, and validate hardware and software for automated control systems. Implement and validate upgraded hardware and software in production automation. Design and implement safety solutions for equipment. Analyze equipment data and perform root cause analysis for systemic production issues. Develop, test, and evaluate software and hardware changes. Design, develop, and support equipment network technologies and cybersecurity measures. Partner with Operations to define and implement data collection strategies. Design improvements or new production equipment to address obsolescence and systemic issues. Verify that equipment specifications (materials and software) in final designs meet requirements. Troubleshoot production issues affecting quality, safety, and repeatability; coordinate with stakeholders to implement solutions. Lead and manage projects for acquisition or modification of production equipment, including budget and schedule management. Prepare and release bid and purchase specifications for equipment from suppliers. Analyze design/build concepts to ensure producibility and investigate alternative solutions. Maintain and enhance data collection systems tracking equipment performance (OEE, MTBF, MTTR, uptime). Ensure projects comply with applicable industry, electrical, and safety codes. Maintain configuration and documentation for hardware and software, and implement interim workarounds as needed. Work cross-functionally with fabrication, purchasing, finance, quality, safety, services, R&D, suppliers, and vendors. Don't meet every single requirement? Studies show some people are less likely to apply unless they meet every desired qualification. At Boeing, we're committed to building an inclusive, authentic workplace. If you're excited about this role but your past experience doesn't match every qualification, we encourage you to apply anyway - you may be the right candidate for this or other roles. Basic Qualifications (Required Skills/ Experience): Bachelor of Science degree from an accredited course of study in engineering, engineering technology (including manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science 2 or more years' related engineering work experience or an equivalent combination of technical education and experience Preferred Qualifications (Desired Skills/Experience): 3 or more years' related work experience or an equivalent combination of education and experience 5 or more years' related work experience or an equivalent combination of education and experience 3 or more years of experience working in a production environment 2 or more years of experience in electrical and electronic systems Electrical or Computer Engineering Degree or equivalent Experience with systems diagnostics and troubleshooting. Knowledge of industrial networking, servers, and databases. Programming experience with C#, Java, Visual Basic, or similar PLC programming experience, e.g. Siemens, Rockwell, Fanuc, or similar Experience in Automated Test Equipment with PXI, PCI, VXI, IEEE-488, RS-485, Can bus Experience with computer aided design (CAD) with AutoCAD, Autodesk Inventor or Catia Experience administering Windows operating system Proficiency in Microsoft products (Windows, Office, Project, Visual Studio, etc.) Ability to communicate technical information Project management skills The ability to work in a multidisciplinary team Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation: This is a union-represented position. In locations where SPEEA representation applies, this job family will be covered by the terms of the collective bargaining agreement. Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required. Pay and Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage, and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range for Associate Level (Level 2): $89,250 - $120,750 Summary pay range for Mid-Level (Level 3): $105,400 - $142,600 Summary pay range for Senior Level (Level 4): $129,200 - $174,800 Applications for this position will be accepted until Dec. 15, 2025 Export Control Requirements: This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

We are seeking a Level 4 Senior Staff RF Antenna Engineer with deep expertise in antenna systems, element/mutual coupling, and free-space radiation performance-and the proven ability to rapidly evaluate, troubleshoot, and optimize existing antenna designs. This is a high-impact, fast-response role supporting programs where performance shortfalls must be diagnosed and corrected on aggressive timelines. You will bridge simulation, measurement, and practical implementation to deliver solutions that work-quickly and reliably. Key Responsibilities: Rapidly assess existing antenna and array designs for performance gaps against requirements. Diagnose and resolve issues related to mutual coupling, beam distortion, impedance mismatch, and bandwidth limitations. Recommend and implement design modifications for immediate performance improvements. Perform accelerated free-space radiation pattern measurements and compare results against simulations. Run high-fidelity EM simulations (HFSS, CST, FEKO, or similar) under compressed schedules for fast validation. Evaluate antenna integration into host platforms for mechanical, thermal, and electrical compatibility. Support urgent production and field troubleshooting, including on-site technical interventions when required. Collaborate with RF systems engineers to ensure antenna performance aligns with system-level budgets and phase stability. Produce clear, actionable evaluation reports for program stakeholders, often under short deadlines. Mentor junior engineers in rapid diagnostic and problem-solving methods. Compensation Range: $112,900 - $146,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Required Qualifications: Bachelor's degree in Electrical Engineering, RF Engineering, or related field (Master's or PhD preferred). 10+ years of antenna design and/or evaluation experience in radar, communications, or EW systems. Expert understanding of antenna theory, EM propagation, polarization, and impedance matching. Proven ability to mitigate mutual coupling in dense or phased-array configurations. Experience delivering high-quality antenna evaluations and solutions under aggressive timelines. Proficiency with EM simulation tools such as HFSS, CST, FEKO, GRASP. Hands-on experience with antenna measurement in both anechoic chambers and open-air ranges. US Citizenship with ability to obtain and maintain a security clearance. Preferred Skills: Experience with low-observable and conformal antenna designs. Familiarity with wideband, multiband, and frequency-agile antenna systems. Exceptional problem-solving and communication skills for high-pressure, time-sensitive projects. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

We are seeking a Senior RF Engineer to design, develop, and test discreet transmit/receive (Tx/Rx) RF modules for advanced radar applications. The ideal candidate will have a strong background in RF circuit design, system integration, and performance optimization, with hands-on experience in taking designs from concept to production. Key Responsibilities: Design, simulate, and develop discreet RF Tx/Rx modules for radar systems. Conduct RF system-level analysis, link budget calculations, and trade-off studies. Select and integrate components such as mixers, amplifiers, oscillators, and filters. Perform schematic capture, PCB layout reviews, and work closely with layout engineers to ensure optimal high-frequency performance. Conduct laboratory testing, tuning, and validation of RF modules against specifications. Collaborate with cross-functional teams including firmware, mechanical, and systems engineering to ensure seamless product integration. Support troubleshooting and root cause analysis for performance anomalies. Maintain comprehensive documentation for design decisions, test results, and compliance requirements. Compensation Range: $99,100 - $128,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Required Qualifications: Bachelor's degree in Electrical Engineering, RF Engineering, or related field. 5-8 years of experience in RF design, with a focus on radar or similar high-frequency applications (L,S,C, and X band). Proficiency in RF simulation tools (e.g., Keysight ADS, HFSS, CST, or similar). Proficiency in schematic capture and PCBA layout tools (e.g. Altium Designer, PADS, Allegro) Hands-on experience with RF test equipment (VNA, spectrum analyzers, signal generators, power meters). Solid understanding of RF/microwave circuit theory, impedance matching, noise figure, and gain optimization. Experience with PCB design for RF and microwave circuits. Familiarity with military or aerospace standards for RF systems is a plus. US Citizenship and ability to obtain/maintain a security clearance. Preferred Skills: Knowledge of phased-array radar architectures. Electronics packaging concepts Familiarity with thermal and mechanical considerations in high-frequency module packaging. Citizenship Requirements: Must be a U.S. citizen, Permanent Resident (green card holder), or protected individual as defined by 8 U.S.C. 1324b(a)(3). Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

We are seeking a Level 4 Senior Staff RF Engineer with a strong systems engineering focus to lead the architecture, analysis, and optimization of advanced RF systems for radar and communication applications. This role will require the ability to derive complete RF system budgets, assess and manage key performance parameters such as phase noise, CPCR (Clutter Power to Carrier Ratio), CA (Coherent Ambiguity), and more, while collaborating across engineering disciplines to ensure system performance exceeds mission requirements. Key Responsibilities: Define and develop RF system architectures for radar and advanced sensing applications. Derive and maintain RF link/system budgets including gain, noise figure, dynamic range, and spurious performance. Model and predict phase noise, CPCR, CA, spurious suppression, and related RF performance metrics. Conduct trade studies and system optimization to balance performance, cost, and schedule. Guide the integration of Tx/Rx modules, LO generation/distribution, filters, and beamforming subsystems into complete radar systems. Work closely with hardware, firmware, DSP, and mechanical teams to ensure full system-level alignment. Perform root cause analysis of system performance issues and recommend design changes. Generate and maintain high-quality documentation for requirements, budgets, analysis reports, and verification plans. Provide technical mentorship to junior and mid-level RF engineers. Compensation Range: $112,900 - $146,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Required Qualifications: Bachelor's degree in Electrical Engineering, RF Engineering, or related field (Master's or PhD preferred). 10+ years of experience in RF system design and analysis, preferably for radar or high-performance comms. Deep understanding of RF/microwave theory including gain, noise, non-linear effects, spurious content, and spectral purity. Demonstrated experience deriving and validating system-level RF budgets. Proficiency in simulation tools such as Keysight ADS, MATLAB, HFSS, CST, or similar. Experience with phase noise analysis, CPCR, CA, dynamic range, and link margin calculations. Familiarity with radar system concepts including waveforms, pulse compression, and Doppler processing. Strong skills with RF measurement equipment (VNAs, spectrum analyzers, phase noise analyzers, power meters). US Citizenship with the ability to obtain and maintain a security clearance. Preferred Skills: Experience in phased-array architectures and beamforming. Knowledge of military/aerospace standards and environmental testing. Strong communication skills for customer and internal design reviews. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

We are seeking a Level 4 Senior Staff RF Antenna Engineer with deep expertise in antenna systems, element/mutual coupling, and free-space radiation performance-and the proven ability to rapidly evaluate, troubleshoot, and optimize existing antenna designs. This is a high-impact, fast-response role supporting programs where performance shortfalls must be diagnosed and corrected on aggressive timelines. You will bridge simulation, measurement, and practical implementation to deliver solutions that work-quickly and reliably. Key Responsibilities: Rapidly assess existing antenna and array designs for performance gaps against requirements. Diagnose and resolve issues related to mutual coupling, beam distortion, impedance mismatch, and bandwidth limitations. Recommend and implement design modifications for immediate performance improvements. Perform accelerated free-space radiation pattern measurements and compare results against simulations. Run high-fidelity EM simulations (HFSS, CST, FEKO, or similar) under compressed schedules for fast validation. Evaluate antenna integration into host platforms for mechanical, thermal, and electrical compatibility. Support urgent production and field troubleshooting, including on-site technical interventions when required. Collaborate with RF systems engineers to ensure antenna performance aligns with system-level budgets and phase stability. Produce clear, actionable evaluation reports for program stakeholders, often under short deadlines. Mentor junior engineers in rapid diagnostic and problem-solving methods. Compensation Range: $112,900 - $146,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Required Qualifications: Bachelor's degree in Electrical Engineering, RF Engineering, or related field (Master's or PhD preferred). 10+ years of antenna design and/or evaluation experience in radar, communications, or EW systems. Expert understanding of antenna theory, EM propagation, polarization, and impedance matching. Proven ability to mitigate mutual coupling in dense or phased-array configurations. Experience delivering high-quality antenna evaluations and solutions under aggressive timelines. Proficiency with EM simulation tools such as HFSS, CST, FEKO, GRASP. Hands-on experience with antenna measurement in both anechoic chambers and open-air ranges. US Citizenship with ability to obtain and maintain a security clearance. Preferred Skills: Experience with low-observable and conformal antenna designs. Familiarity with wideband, multiband, and frequency-agile antenna systems. Exceptional problem-solving and communication skills for high-pressure, time-sensitive projects. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

We are seeking a Level 4 Senior Staff RF Engineer with a strong systems engineering focus to lead the architecture, analysis, and optimization of advanced RF systems for radar and communication applications. This role will require the ability to derive complete RF system budgets, assess and manage key performance parameters such as phase noise, CPCR (Clutter Power to Carrier Ratio), CA (Coherent Ambiguity), and more, while collaborating across engineering disciplines to ensure system performance exceeds mission requirements. Key Responsibilities: Define and develop RF system architectures for radar and advanced sensing applications. Derive and maintain RF link/system budgets including gain, noise figure, dynamic range, and spurious performance. Model and predict phase noise, CPCR, CA, spurious suppression, and related RF performance metrics. Conduct trade studies and system optimization to balance performance, cost, and schedule. Guide the integration of Tx/Rx modules, LO generation/distribution, filters, and beamforming subsystems into complete radar systems. Work closely with hardware, firmware, DSP, and mechanical teams to ensure full system-level alignment. Perform root cause analysis of system performance issues and recommend design changes. Generate and maintain high-quality documentation for requirements, budgets, analysis reports, and verification plans. Provide technical mentorship to junior and mid-level RF engineers. Compensation Range: $112,900 - $146,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Required Qualifications: Bachelor's degree in Electrical Engineering, RF Engineering, or related field (Master's or PhD preferred). 10+ years of experience in RF system design and analysis, preferably for radar or high-performance comms. Deep understanding of RF/microwave theory including gain, noise, non-linear effects, spurious content, and spectral purity. Demonstrated experience deriving and validating system-level RF budgets. Proficiency in simulation tools such as Keysight ADS, MATLAB, HFSS, CST, or similar. Experience with phase noise analysis, CPCR, CA, dynamic range, and link margin calculations. Familiarity with radar system concepts including waveforms, pulse compression, and Doppler processing. Strong skills with RF measurement equipment (VNAs, spectrum analyzers, phase noise analyzers, power meters). US Citizenship with the ability to obtain and maintain a security clearance. Preferred Skills: Experience in phased-array architectures and beamforming. Knowledge of military/aerospace standards and environmental testing. Strong communication skills for customer and internal design reviews. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

We are seeking a Level 4 Senior Staff RF Engineer with a strong systems engineering focus to lead the architecture, analysis, and optimization of advanced RF systems for radar and communication applications. This role will require the ability to derive complete RF system budgets, assess and manage key performance parameters such as phase noise, CPCR (Clutter Power to Carrier Ratio), CA (Coherent Ambiguity), and more, while collaborating across engineering disciplines to ensure system performance exceeds mission requirements. Key Responsibilities: Define and develop RF system architectures for radar and advanced sensing applications. Derive and maintain RF link/system budgets including gain, noise figure, dynamic range, and spurious performance. Model and predict phase noise, CPCR, CA, spurious suppression, and related RF performance metrics. Conduct trade studies and system optimization to balance performance, cost, and schedule. Guide the integration of Tx/Rx modules, LO generation/distribution, filters, and beamforming subsystems into complete radar systems. Work closely with hardware, firmware, DSP, and mechanical teams to ensure full system-level alignment. Perform root cause analysis of system performance issues and recommend design changes. Generate and maintain high-quality documentation for requirements, budgets, analysis reports, and verification plans. Provide technical mentorship to junior and mid-level RF engineers. Compensation Range: $112,900 - $146,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Required Qualifications: Bachelor's degree in Electrical Engineering, RF Engineering, or related field (Master's or PhD preferred). 10+ years of experience in RF system design and analysis, preferably for radar or high-performance comms. Deep understanding of RF/microwave theory including gain, noise, non-linear effects, spurious content, and spectral purity. Demonstrated experience deriving and validating system-level RF budgets. Proficiency in simulation tools such as Keysight ADS, MATLAB, HFSS, CST, or similar. Experience with phase noise analysis, CPCR, CA, dynamic range, and link margin calculations. Familiarity with radar system concepts including waveforms, pulse compression, and Doppler processing. Strong skills with RF measurement equipment (VNAs, spectrum analyzers, phase noise analyzers, power meters). US Citizenship with the ability to obtain and maintain a security clearance. Preferred Skills: Experience in phased-array architectures and beamforming. Knowledge of military/aerospace standards and environmental testing. Strong communication skills for customer and internal design reviews. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

We are seeking a Level 4 Senior Staff RF Engineer with a strong systems engineering focus to lead the architecture, analysis, and optimization of advanced RF systems for radar and communication applications. This role will require the ability to derive complete RF system budgets, assess and manage key performance parameters such as phase noise, CPCR (Clutter Power to Carrier Ratio), CA (Coherent Ambiguity), and more, while collaborating across engineering disciplines to ensure system performance exceeds mission requirements. Key Responsibilities: Define and develop RF system architectures for radar and advanced sensing applications. Derive and maintain RF link/system budgets including gain, noise figure, dynamic range, and spurious performance. Model and predict phase noise, CPCR, CA, spurious suppression, and related RF performance metrics. Conduct trade studies and system optimization to balance performance, cost, and schedule. Guide the integration of Tx/Rx modules, LO generation/distribution, filters, and beamforming subsystems into complete radar systems. Work closely with hardware, firmware, DSP, and mechanical teams to ensure full system-level alignment. Perform root cause analysis of system performance issues and recommend design changes. Generate and maintain high-quality documentation for requirements, budgets, analysis reports, and verification plans. Provide technical mentorship to junior and mid-level RF engineers. Compensation Range: $112,900 - $146,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Required Qualifications: Bachelor's degree in Electrical Engineering, RF Engineering, or related field (Master's or PhD preferred). 10+ years of experience in RF system design and analysis, preferably for radar or high-performance comms. Deep understanding of RF/microwave theory including gain, noise, non-linear effects, spurious content, and spectral purity. Demonstrated experience deriving and validating system-level RF budgets. Proficiency in simulation tools such as Keysight ADS, MATLAB, HFSS, CST, or similar. Experience with phase noise analysis, CPCR, CA, dynamic range, and link margin calculations. Familiarity with radar system concepts including waveforms, pulse compression, and Doppler processing. Strong skills with RF measurement equipment (VNAs, spectrum analyzers, phase noise analyzers, power meters). US Citizenship with the ability to obtain and maintain a security clearance. Preferred Skills: Experience in phased-array architectures and beamforming. Knowledge of military/aerospace standards and environmental testing. Strong communication skills for customer and internal design reviews. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers - large and small - package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility. People • Customers • Trust We are seeking resumes for a Process Control Engineer's in our Valdosta, GA. Paper Mill. The Process Control Engineer is responsible for coordinating the planning, organizing, programming, and maintenance of all mill PLC, Distributed, and Quality Control Systems. Responsible for managing a group of hourly union journeyman technicians on a daily basis for programming PLC and Distributed Control Systems based on operational and engineering needs. The engineer will help to define and participate in the development of control system daily and preventative maintenance programs to improve reliability of all included control systems in the mill. Principle Accountabilities: Providing technical direction, assistance, and solutions to hourly electrical maintenance and operating personnel. Work with key mechanical, reliability maintenance, and engineering personnel to support daily and monthly scheduled maintenance outages and annual outage jobs within the field of process control engineering. Some crossover activities to the electrical/mechanical maintenance programs will be required to deliver complete programs for all types of equipment. Work with maintenance/engineering and operations personnel to complete maintenance and capital projects. Provide management and programming support including: necessary programming, training, stocking of spare parts, preventive maintenance checklists, drawing creation, and updates for the maintenance/engineering personnel as needed. Supports the Mills goals for safety, environmental, and other areas of need. Focus on Process Control supervision of hourly union work force, supervision of programming of all mill control systems for daily activities, and capital projects and control system equipment reliability. Manage the control system equipment tracking programs and systems PM programs. Utilize predictive & preventative maintenance programs to identify and correct equipment issues. Input and update equipment information and documentation. Develop equipment manuals for precision inspection and maintenance of the control systems in the mill. Manage assigned work for monthly and annual outages. Assist with MS Project timelines for monthly and annual outages. Plan and execute capital projects for maintenance replacements of control systems equipment. Effectively manage jobs for best result at lowest cost. Look for opportunities to solve issues, reduce cost, and improve planning performance. Solve problems utilizing the mill's RCFA program. Effectively manages contractors for performing jobs. Performs other responsibilities as needed. Basic Qualifications Bachelor's degree in Electrical or Chemical Engineering or equivalent education and experience required. A minimum of 2-5 years' experience, or the equivalent, in Electrical or Chemical Engineering. Experience using Microsoft Excel, Outlook, PowerPoint, Word, Project, and AutoCAD. Successful completion of drug screen required and authorization to work in the U.S. Preferred Qualifications Pulp & Paper industry experience preferred. The successful candidate must possess the following Knowledge, Skills & Abilities: Ability to be able to work well under pressure and within time constraints, multi-task, and build sound relationships with both internal and external customers Ability to exhibit excellent communication, analytical, organizational, and computer skills. Capable of independently making sound decisions through creative problem-solving, ambiguity, and change. Ability to work in a fast-paced environment and handle multiple requests simultaneously. Ability to read and understand technical correspondence, memos, instructions, and reports. Ability to apply skills to continuous process improvement while maintaining maximum levels of safety. Demonstrated leadership skills and abilities. Strong planning and follow up skills. Excellent people and process management skills. PAY & BENEFITS: PCA provides a competitive, comprehensive benefits package. Excellent Medical, Dental, and Vision 401k with company matching Retirement Savings Plan Educational Assistance Program 11 paid holidays 3 Weeks of Vacation Time Employee Assistance Program (EAP) All qualified applicants must apply at Careers.packagingcorp.com to be considered. PCA is an Equal Opportunity Employer - Veterans/Disabled and other protected categories.

As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers - large and small - package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility. People • Customers • Trust We are seeking resumes for Electrical Project Engineers in our Valdosta, GA. Paper Mill. The Electrical Project Engineer is responsible for coordinating the planning, organizing, and completion of mill reliability programs within the area of assigned responsibility. The engineer will help to define and participate in the development of electrical reliability programs to improve maintain and improve reliability of electrical machinery in the mill. This includes providing technical direction, assistance, and solutions to maintenance and operating personnel. Principle Accountabilities: Responsible for managing all phases of developing key maintenance programs from conception through final implementation. Will work with key maintenance and engineering personnel to support daily, monthly scheduled maintenance outages and annual outages jobs within the field of electrical maintenance and engineering. Some crossover activities to the mechanical maintenance programs will be required to deliver complete programs for all types of equipment. Will work with mechanical maintenance/engineering and operations personnel to complete electrical or mechanical maintenance projects and programs including: necessary training, stocking of spare parts, preventive maintenance checklists, drawing creation and updates, etc. Supports the Mills goals for safety, environmental, and other areas of need. Focus on electrical equipment reliability. Manage equipment tracking and rebuild programs. Utilize predictive & preventative maintenance programs to identify and correct equipment issues. Input and update equipment information and documentation. Develop equipment manuals for precision inspection and maintenance of equipment. Manage area equipment PM and maintenance programs. Manage assigned work for monthly and annual outages. Assist with MS Project timelines for monthly an annual outages. Plan and execute capital projects for maintenance replacements of equipment. Effectively manage jobs for best result at lowest cost. Look for opportunities to solve issues, reduce cost, and improve planning performance. Solve problems utilizing the mill's RCFA program. Effectively manages contractors for performing jobs. Performs other responsibilities as needed. Basic Qualifications Bachelor's degree in Electrical Engineering or Equivalent education and experience required. A minimum of 2-5 years' experience, or the equivalent, in Electrical maintenance. Experience using Microsoft Excel, Outlook, PowerPoint, Word, Project, and AutoCAD. Successful completion of drug screen required and authorization to work in the U.S. Preferred Qualifications Pulp & Paper industry experience preferred. The successful candidate must possess the following Knowledge, Skills & Abilities: Ability to be able to work well under pressure and within time constraints, multi-task, and build sound relationships with both internal and external customers Ability to exhibit excellent communication, analytical, organizational and computer skills. Capable of independently making sound decisions through creative problem-solving, ambiguity, and change. Ability to work in a fast-paced environment and handle multiple requests simultaneously. Ability to read and understand technical correspondence, memos, instructions, and reports. Ability to apply skills to continuous process improvement while maintaining maximum levels of safety. Demonstrated leadership skills and abilities. Strong planning and follow-up skills. Excellent people and process management skills. PAY & BENEFITS: PCA provides a competitive, comprehensive benefits package. Excellent Medical, Dental, and Vision 401 (k) with company matching Retirement Savings Plan Educational Assistance Program 11 paid holidays 3 Weeks of Vacation Time Employee Assistance Program (EAP) #LI-SG2 All qualified applicants must apply at Careers.packagingcorp.com to be considered. PCA is an Equal Opportunity Employer - Veterans/Disabled and other protected categories.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is seeking an Experienced or Senior Asset Software & Controls Engineer to support 3rd-shift automation equipment for the Production Engineering organization in Renton and Everett, WA. The successful candidate will bring passion, creativity, and a strong drive for process improvement and efficiency. They should be eager to work on the factory floor-interacting with mechanics, safety, and equipment services-and to provide direct support to the production system. In Production Engineering, we value highly responsible professionals committed to the highest standards of safety, quality, and integrity. Primary Responsibilities: Programs, integrates, & troubleshoots automation system from industry leading Original Equipment Manufacturers (OEMs) Programs, integrates, & troubleshoots Programmable Logic Controllers (PLC), Numerical Controls (NC), Human Machine Interfaces (HMI), & Drives from Siemens, FANUC, or Allen Bradley Optimizes complex robotics & automation tools and equipment for safety, ergonomics, quality, flow, reliability, or maintainability Maintains and improves data collection systems that track equipment performance metrics including OEE, MTBF, MTTR, and machine uptime. Manages projects and comply with industry standards including electrical and safety codes Develops and implements basic work-arounds and maintains configuration of hardware, software and documentation. Assists and helps manage projects involving the acquisition or modification of production equipment. Generates system specifications from production system requirements Develops and releases bid and purchase specifications for equipment needs from suppliers. Analyzes design/build concepts, to evaluate a producible design/build definition. Investigates alternative solutions to meet the producibility requirements. Works in a cross functional team alongside manufacturing, quality, safety, services, research and technology, suppliers and vendors Communicates, collaborates effectively with others Basic Qualifications (Required Skills/ Experience): Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science 3 or more years' related engineering work experience or an equivalent combination of technical education and experience Preferred Qualifications (Desired Skills/Experience): (Senior level) 5 or more years' related work experience or an equivalent combination of education and experience 5 or more years of experience working in a production environment 5 or more years of experience with programming, integrating or troubleshooting industrial automation from OEMs such as ABB or FANUC, or PLCs, NCs, HMIs, or Drives such as Siemens, FANUC or Allen Bradley 5 or more years of experience with programming languages such as Java and SQL 5 or more years of experience working with hardware, software, and documentation configuration management 5 or more years of experience working to industry standards including compliance with hardware and safety codes Ability to learn in a fast-paced environment Strong communication skills and an ability to collaborate across cross-functional teams Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation: This is a union-represented position. In locations where SPEEA representation applies, this job family will be covered by the terms of the collective bargaining agreement. Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required. Shift: This role is for 3rd Shift, however, there may be additional shift requirements to support program objectives Pay and Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage, and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range for Experienced (Level 3): $105,400 - $142,600 Summary pay range for Senior Level (Level 4): $129,200 - $174,800 Applications for this position will be accepted until Dec. 17, 2025 Export Control Requirements: This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 3rd shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Defense, Space & Security's Air Dominance division is hiring Experienced, Senior, Lead Guidance Navigation and Control (GNC) Engineers in Hazelwood, MO. Propelled by a team with an innovative spirit that transcends cultures, Air Dominance delivers decisive mission advantages through cutting-edge capabilities and supports design, manufacturing, and services for a broad portfolio of military aircraft. These roles will support new product design, development, integration and flight test supporting the areas of guidance, modeling and simulation, flight control and subsystem control for the expanding Air Dominance Portfolio, including the newly awarded F-47. Flight engineers are essential to the development, safety and success of our products and solutions. Each day, they go above and beyond to meet our customers' overall mission requirements-from initial vehicle concept definition through design, test, validation and in-service support. Your expertise in areas such as Aerodynamics; Propulsion; Guidance, Navigation & Control; and Loads & Dynamics will drive the future of aerospace. Position Responsibilities: Define Guidance, Navigation and Control mission requirements and ensure requirements traceability and quality from the system level to component level Use multidisciplinary model data (aero, mass properties, propulsion, etc.) to develop and refine a complex, nonlinear, 6 degrees of freedom simulation model Use various software languages, C, C++, FORTRAN, Python, etc. to develop, implement, integrate and test vehicle models and controllers Design flight control laws using modern linear control design techniques and tools to achieve design and performance targets Use advanced nonlinear analysis to assess and refine the control law design Perform model validation against test data to inform and improve the accuracy of the simulation environment Develop supplementary controllers, limiters, mode logic, and signal shaping to properly bound the performance within all areas of the flight envelope Work with flight simulation and Vehicle Management Systems (VMS) software engineers to incorporate control laws into the operational flight program Support flight simulations including desktop, software, and real time simulations Support hardware in the loop development and testing Support flight testing planning and execution Lead design reviews, analyses, simulations and component/system testing to ensure delivery of products that meet or exceed customer requirements and expectations Train and coach others Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement 5 or more years' related work experience or an equivalent combination of technical education and experience 3+ years of experience with Guidance Navigation and Control engineering Experience using Matlab/Simulink or MatrixX to model systems Preferred Qualifications (Desired Skills/Experience): Level 4: 9 or more years' related work experience or an equivalent combination of technical education and experience Level 5: 14 or more years' related work experience or an equivalent combination of technical education and experience Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range (Level 3): $102,000 - $138,000 Summary pay range (Level 4): $126,650 - $171,350 Summary pay range (Level 5): $153,000 - $207,000 Applications for this position will be accepted until Dec. 24, 2025 Export Control Requirements: This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

We are seeking a Level 4 Senior Staff RF Antenna Engineer with deep expertise in antenna systems, element/mutual coupling, and free-space radiation performance-and the proven ability to rapidly evaluate, troubleshoot, and optimize existing antenna designs. This is a high-impact, fast-response role supporting programs where performance shortfalls must be diagnosed and corrected on aggressive timelines. You will bridge simulation, measurement, and practical implementation to deliver solutions that work-quickly and reliably. Key Responsibilities: Rapidly assess existing antenna and array designs for performance gaps against requirements. Diagnose and resolve issues related to mutual coupling, beam distortion, impedance mismatch, and bandwidth limitations. Recommend and implement design modifications for immediate performance improvements. Perform accelerated free-space radiation pattern measurements and compare results against simulations. Run high-fidelity EM simulations (HFSS, CST, FEKO, or similar) under compressed schedules for fast validation. Evaluate antenna integration into host platforms for mechanical, thermal, and electrical compatibility. Support urgent production and field troubleshooting, including on-site technical interventions when required. Collaborate with RF systems engineers to ensure antenna performance aligns with system-level budgets and phase stability. Produce clear, actionable evaluation reports for program stakeholders, often under short deadlines. Mentor junior engineers in rapid diagnostic and problem-solving methods. Compensation Range: $112,900 - $146,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Required Qualifications: Bachelor's degree in Electrical Engineering, RF Engineering, or related field (Master's or PhD preferred). 10+ years of antenna design and/or evaluation experience in radar, communications, or EW systems. Expert understanding of antenna theory, EM propagation, polarization, and impedance matching. Proven ability to mitigate mutual coupling in dense or phased-array configurations. Experience delivering high-quality antenna evaluations and solutions under aggressive timelines. Proficiency with EM simulation tools such as HFSS, CST, FEKO, GRASP. Hands-on experience with antenna measurement in both anechoic chambers and open-air ranges. US Citizenship with ability to obtain and maintain a security clearance. Preferred Skills: Experience with low-observable and conformal antenna designs. Familiarity with wideband, multiband, and frequency-agile antenna systems. Exceptional problem-solving and communication skills for high-pressure, time-sensitive projects. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers - large and small - package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility. People • Customers • Trust We are seeking resumes for a Process Control Engineer in our Tomahawk, WI Paper Mill. This position will be responsible for DCS administration, maintenance, troubleshooting, and modernization, design, and implementation of new control strategies, tuning and optimization of control loops. Responsible for project management of process control and instrumentation projects, supporting project teams and mill operations with process control expertise, and coordinating and working with process control and instrumentation outside sales and service vendors. Principle Accountabilities: Install, operate and maintain the process control and process information systems including the installation and maintenance of all hardware and software components. Develop and maintain all documentation and backup of the process control and process information systems. Participate in the capital projects by providing development of the process and instrumentation diagrams, process control strategies, the selection, installation, start up and maintenance of all process control equipment. Provide enhancements to the existing process control systems including hardware and software upgrades, advanced control strategies and productivity improvements. Keep up to date with all new technology for process equipment and process control strategies by attending trade shows, seminars and reviewing process control literature. Supports the Mill's goals for safety, environmental, and other areas of need. Implementation and maintaining DCS and/or PLC based control systems. Engineering and application experience with Emerson Delta V DCS, ABB DCS, ABB sheet scanners, and QCS systems. Bailey DCS and Rockwell Control Logix and design, installation, and start up experience for field instruments including flow, temperature, level, pressure, consistency, and control valves. Performs other responsibilities as need Basic Qualifications: Bachelor's degree in Process Control related field or an Associate's Degree in a Process Control related with 3+ years of industrial process control experience required. Experience using Microsoft Office and AutoCAD. Must be authorized to work in the U.S. Preferred Qualifications: Paper Mill experience is preferred Knowledge Skills & Abilities: Working knowledge of basic process control principles. Self-starter and highly motivated. Team orientated with excellent communication skills. Compensation and Benefits Starting salary for position: [$XX.YY] per hour. ***Delete this line if it does not apply. For HOURLY only. Bonus: Annual - Based upon achievement of plant performance metrics. ***Delete this line if it does not apply. For HOURLY CORRUGATED only. Paid Vacation: [insert number] weeks per calendar year. Pro-rata Vacation during the initial year of hire based upon start date within the calendar year. ***For HOURLY only. Starting salary range for position: [insert salary range]. ***Delete this line if it does not apply. For SALARIED only. Bonus: Annual - Based upon individual contribution and overall, Company performance. ***Delete this line if it does not apply. For SALARIED only. Paid Vacation: Three (3) weeks per calendar year. Pro-rata Vacation during the initial year of hire based upon start date within the calendar year. ***Delete this line if it does not apply. For SALARIED only. Paid Holidays. Within the first 30 days of employment, an employee (and their dependents) is eligible to enroll in certain benefit coverages -- medical, dental, and vision - and are automatically enrolled in life, AD&D, and disability coverages. Upon hire, an employee is automatically enrolled in the 401k plan. The plan offers both pre-tax and Roth contribution options along with employer provided matching contributions. Disclaimer: The Compensation and Benefits information in this posting represents PCA's good faith and reasonable estimate of what it may pay for this position. The Company reserves the right to modify this information at any time, subject to applicable law. PCA is an Equal Opportunity Employer Qualified Applicants must apply at careers.packagingcorp.com to be considered.

As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers - large and small - package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility. People • Customers • Trust We are seeking resumes for an Electrical Project Engineer at our Tomahawk, WI facility. Principle Responsibilities: Provide engineering services to maintenance and operating department personnel as required to resolve maintenance, technical, and equipment reliability issues. Establish and maintain safe work practices and safe work environment for coworkers and employees. Be sure that mill rules are enforced and that company policies are followed. Supervise mill and contract employees as required. Ensure that equipment files and database are maintained properly and understand equipment operation and function as required to determine preventive and predictive maintenance needs. Develop preventive maintenance and predictive maintenance procedures as required to insure equipment availability. Work with peers to effectively maintain equipment to achieve uptime goals as set by the department. Prepare scope and cost estimate for assigned projects. Develop an engineering, procurement and construction strategy for each project. Design and implement approved projects. Monitor and control project scope, schedule and cost. Manage project construction. Coordinate project commissioning and start-up. Communicate project status to operation and maintenance. Provide technical assistance to operations and maintenance to identify and solve routine problems. Other duties assigned by Engineering Manager. Basic Qualifications: BS Degree in Electrical Engineering is required. Excellent organizational skills, including attention to detail and follow up skills. Demonstrated skills in setting priorities and delegating, analytical problem solving, and facilitating in a team environment. Excellent written and verbal communication skills required. Must be able to function and contribute within a team environment Must be authorized to work in U.S. Preferred Qualifications: Pulp and paper experience. All qualified applicants must apply at Careers.packagingcorp.com to be considered. PCA is an Equal Opportunity Employer - Veterans/Disabled and other protected categories.

As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers - large and small - package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility. People • Customers • Trust We are seeking resumes for Electrical Project Engineer in our DeRidder LA. Paper Mill. The Electrical Project Engineer is responsible for coordinating the planning, organizing, and completion of mill capital projects within the area of assigned responsibility. The engineer will help to: define projects budgets; order material; define scope of work for various disciplines; coordinate and oversee the installation of electrical/mechanical projects. Principle Accountabilities: Responsible for managing all phases of developing key maintenance programs from conception through final implementation. Will work with key maintenance and engineering personnel to support daily, monthly scheduled maintenance outages and annual outages jobs within the field of electrical maintenance and engineering. Some crossover activities to the mechanical maintenance programs will be required to deliver complete programs for all types of equipment. Will work with mechanical maintenance/engineering and operations personnel to complete electrical or mechanical maintenance projects and programs including: necessary training, stocking of spare parts, preventive maintenance checklists, drawing creation and updates, etc. Supports the Mills goals for safety, environmental, and other areas of need. Focus on electrical equipment reliability. Manage equipment tracking and rebuild programs. Utilize predictive & preventative maintenance programs to identify and correct equipment issues. Input and update equipment information and documentation. Manage assigned work for monthly and annual outages. Assist with MS Project timelines for monthly an annual outages. Plan and execute capital projects for maintenance replacements of equipment. Effectively manage jobs for best result at lowest cost. Look for opportunities to solve issues, reduce cost, and improve planning performance. Solve problems utilizing the mill's RCFA program. Effectively manages contractors for performing jobs. This position is on an on-call rotation schedule including occasional hours outside of your regularly scheduled hours potentially evenings, weekends and holidays. Performs other responsibilities as needed. Basic Qualifications Bachelor's degree in Mechanical or Electrical Engineering or Equivalent education and experience required. A minimum of 2-5 years' experience, or the equivalent, in Electrical maintenance. Experience using Microsoft Excel, Outlook, PowerPoint, Word, Project, RSLogix 5000, PTW/SKM Power Tools, and AutoCAD. Successful completion of drug screen required and authorization to work in the U.S. Preferred Qualifications Pulp & Paper industry experience preferred. The successful candidate must possess the following Knowledge, Skills & Abilities: Ability to be able to work well under pressure and within time constraints, multi-task, and build sound relationships with both internal and external customers Ability to exhibit excellent communication, analytical, organizational and computer skills. Capable of independently making sound decisions through creative problem-solving, ambiguity, and change. Ability to work in a fast-paced environment and handle multiple requests simultaneously. Ability to read and understand technical correspondence, memos, instructions, and reports. Ability to apply skills to continuous process improvement while maintaining maximum levels of safety. Demonstrated leadership skills and abilities. Strong planning and follow up skills. Excellent people and process management skills. PAY & BENEFITS: PCA provides a competitive comprehensive benefits package. Excellent Medical, Dental, and Vision 401k with company matching Retirement Savings Plan Educational Assistance Program 11 paid holidays 3 Weeks of Vacation Time Employee Assistance Program (EAP) COMPENSATION AND BENEFITS Starting salary range for position: $95,000-$120,000 DOE. Bonus: Annual - Based upon individual contribution and overall, Company performance. Relocation available Paid Vacation: Three (3) weeks per calendar year. Pro-rata Vacation during the initial year of hire based upon start date within the calendar year. Paid Holidays. Within the first 30 days of employment, an employee (and their dependents) is eligible to enroll in certain benefit coverages -- medical, dental, and vision - and are automatically enrolled in life, AD&D, and disability coverages. Upon hire, an employee is automatically enrolled in the 401k plan. The plan offers both pre-tax and Roth contribution options along with employer provided matching contributions. Disclaimer: The Compensation and Benefits information in this posting represents PCA's good faith and reasonable estimate of what it may pay for this position. The Company reserves the right to modify this information at any time, subject to applicable law. PCA is an Equal Opportunity Employer Qualified Applicants must apply at careers.packagingcorp.com to be considered.

As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers - large and small - package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility. People • Customers • Trust Principal Accountabilities: Support mill through use of established electrical maintenance, reliability and engineering best practices and processes Building electrical maintenance strategies and execution plans that will continually improve the electrical reliability of operations and provide a more competitive position in key operating parameters such as safety, environmental, product quality, productivity, and cost. Provide technical support for efficient troubleshooting and or problem solving activities and electrical repair to maximize efficiencies and limit downtime. Lead electrical maintenance resources, initiatives, and strategic plans and be accountable for performance of electrical systems and assets. Perform research, design and development of electrical maintenance processes, including production flow, assembly methods and production equipment. Support bottom line profit and loss improvement in all areas by analyzing electrical maintenance processes for cost reduction, quality, and efficiency improvement Coordinates the manufacturing launch of new/revised products and processes, including establishing goals, training team members and evaluating results. Monitor sites and procedures to confirm that all operations are in compliance with corporate regulations. Plan, develop, coordinate and direct assigned engineering projects to a successful completion Conduct assessment of or respond to electrical process improvement requests. Collect data resulting from investigations and perform / obtain analyses up-date. Provide report with recommendations and conclusions. Ensure production crew and management has adequate training in regards to assigned projected and equipment knows and follows policies and procedures of the company shares information that would benefit of the members of the team and finds ways to improve the delivery of service to our customers. Basic qualifications: Bachelor of Science in Electrical Engineering from an accredited college or university Preferred Qualifications: Experience in a packaging or other manufacturing environment COMPENSATION AND BENEFITS Starting salary range for position: $85,000-$90,000. Bonus: Annual - Based upon individual contribution and overall, Company performance. Relocation Paid Vacation: Three (3) weeks per calendar year. Pro-rata Vacation during the initial year of hire based upon start date within the calendar year. Paid Holidays. Within the first 30 days of employment, an employee (and their dependents) is eligible to enroll in certain benefit coverages -- medical, dental, and vision - and are automatically enrolled in life, AD&D, and disability coverages. Upon hire, an employee is automatically enrolled in the 401k plan. The plan offers both pre-tax and Roth contribution options along with employer provided matching contributions. Disclaimer: The Compensation and Benefits information in this posting represents PCA's good faith and reasonable estimate of what it may pay for this position. The Company reserves the right to modify this information at any time, subject to applicable law. PCA is an Equal Opportunity Employer Qualified Applicants must apply at careers.packagingcorp.com to be considered.